audk/ArmPkg/Universal/MmcDxe/Mmc.h

/** @file
  Main Header file for the MMC DXE driver

  Copyright (c) 2011, ARM Limited. All rights reserved.
  
  This program and the accompanying materials                          
  are licensed and made available under the terms and conditions of the BSD License         
  which accompanies this distribution.  The full text of the license may be found at        
  http://opensource.org/licenses/bsd-license.php                                            

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

**/

#ifndef __MMC_H
#define __MMC_H

#include <Uefi.h>

#include <Protocol/DiskIo.h>
#include <Protocol/BlockIo.h>
#include <Protocol/DevicePath.h>
#include <Protocol/MmcHost.h>

#include <Library/UefiLib.h>

#define MMC_TRACE(txt)  DEBUG((EFI_D_BLKIO, "MMC: " txt "\n"))

#define MMC_IOBLOCKS_READ       0
#define MMC_IOBLOCKS_WRITE      1

#define MMC_OCR_POWERUP             0x80000000

#define MMC_CSD_GET_CCC(Response)    (Response[1] >> 20)
#define MMC_CSD_GET_TRANSPEED(Response)    (Response[0] & 0xFF)
#define MMC_CSD_GET_READBLLEN(Response)    ((Response[1] >> 16) & 0xF)
#define MMC_CSD_GET_WRITEBLLEN(Response)  ((Response[3] >> 22) & 0xF)
#define MMC_CSD_GET_FILEFORMAT(Response)  ((Response[3] >> 10) & 0x3)
#define MMC_CSD_GET_FILEFORMATGRP(Response)  ((Response[3] >> 15) & 0x1)
#define MMC_CSD_GET_DEVICESIZE(csd)         (((Response[2] >> 30) & 0x3) | ((Response[1] & 0x3FF) << 2))
#define MMC_CSD_GET_DEVICESIZEMULT(csd)     ((Response[2] >> 15) & 0x7)

#define MMC_R0_CURRENTSTATE(Response)       ((Response[0] >> 9) & 0xF)

#define MMC_R0_STATE_IDLE       0
#define MMC_R0_STATE_READY      1
#define MMC_R0_STATE_IDENT      2
#define MMC_R0_STATE_STDBY      3
#define MMC_R0_STATE_TRAN       4
#define MMC_R0_STATE_DATA       5

typedef enum {
  UNKNOWN_CARD,
  MMC_CARD,              //MMC card
  MMC_CARD_HIGH,         //MMC Card with High capacity
  SD_CARD,               //SD 1.1 card
  SD_CARD_2,             //SD 2.0 or above standard card
  SD_CARD_2_HIGH         //SD 2.0 or above high capacity card
} CARD_TYPE;

typedef struct {
  UINT32  Reserved0:   7; // 0 
  UINT32  V170_V195:   1; // 1.70V - 1.95V
  UINT32  V200_V260:   7; // 2.00V - 2.60V
  UINT32  V270_V360:   9; // 2.70V - 3.60V
  UINT32  RESERVED_1:  5; // Reserved
  UINT32  AccessMode:  2; // 00b (byte mode), 10b (sector mode) 
  UINT32  Busy:        1; // This bit is set to LOW if the card has not finished the power up routine
} OCR;

typedef struct {
  UINT32  NOT_USED;   // 1 [0:0]
  UINT32  CRC;        // CRC7 checksum [7:1]
  UINT32  MDT;        // Manufacturing date [19:8]
  UINT32  RESERVED_1; // Reserved [23:20]
  UINT32  PSN;        // Product serial number [55:24]
  UINT8   PRV;        // Product revision [63:56]
  UINT8   PNM[5];     // Product name [64:103]
  UINT16  OID;        // OEM/Application ID [119:104]
  UINT8   MID;        // Manufacturer ID [127:120]
} CID;

typedef struct {
  UINT8   NOT_USED:           1; // Not used, always 1 [0:0]
  UINT8   CRC:                7; // CRC [7:1]

  UINT8   RESERVED_1:         2; // Reserved [9:8]
  UINT8   FILE_FORMAT:        2; // File format [11:10]
  UINT8   TMP_WRITE_PROTECT:  1; // Temporary write protection [12:12]
  UINT8   PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
  UINT8   COPY:               1; // Copy flag (OTP) [14:14]
  UINT8   FILE_FORMAT_GRP:    1; // File format group [15:15]
  
  UINT16  RESERVED_2:         5; // Reserved [20:16]
  UINT16  WRITE_BL_PARTIAL:   1; // Partial blocks for write allowed [21:21]
  UINT16  WRITE_BL_LEN:       4; // Max. write data block length [25:22]
  UINT16  R2W_FACTOR:         3; // Write speed factor [28:26]
  UINT16  RESERVED_3:         2; // Reserved [30:29]
  UINT16  WP_GRP_ENABLE:      1; // Write protect group enable [31:31]
  
  UINT32  WP_GRP_SIZE:        7; // Write protect group size [38:32]
  UINT32  SECTOR_SIZE:        7; // Erase sector size [45:39]
  UINT32  ERASE_BLK_EN:       1; // Erase single block enable [46:46]
  UINT32  C_SIZE_MULT:        3; // Device size multiplier [49:47]
  UINT32  VDD_W_CURR_MAX:     3; // Max. write current @ VDD max [52:50]
  UINT32  VDD_W_CURR_MIN:     3; // Max. write current @ VDD min [55:53]
  UINT32  VDD_R_CURR_MAX:     3; // Max. read current @ VDD max [58:56]
  UINT32  VDD_R_CURR_MIN:     3; // Max. read current @ VDD min [61:59]
  UINT32  C_SIZELow2:         2; // Device size [63:62]
  
  UINT32  C_SIZEHigh10:       10;// Device size [73:64]
  UINT32  RESERVED_4:         2; // Reserved [75:74]
  UINT32  DSR_IMP:            1; // DSR implemented [76:76]
  UINT32  READ_BLK_MISALIGN:  1; // Read block misalignment [77:77]
  UINT32  WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78]
  UINT32  READ_BL_PARTIAL:    1; // Partial blocks for read allowed [79:79]
  UINT32  READ_BL_LEN:        4; // Max. read data block length [83:80]
  UINT32  CCC:                12;// Card command classes [95:84]

  UINT8   TRAN_SPEED          ;  // Max. bus clock frequency [103:96]
  UINT8   NSAC                ;  // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
  UINT8   TAAC                ;  // Data read access-time 1 [119:112]
  
  UINT8   RESERVED_5:         6; // Reserved [125:120]
  UINT8   CSD_STRUCTURE:      2; // CSD structure [127:126]
} CSD;

typedef struct  {
  UINT16    RCA;
  CARD_TYPE CardType;
  OCR       OCRData;
  CID       CIDData;
  CSD       CSDData;
} CARD_INFO;

typedef struct _MMC_HOST_INSTANCE {
  UINTN                     Signature;
  LIST_ENTRY                Link;
  EFI_HANDLE                MmcHandle;
  EFI_DEVICE_PATH_PROTOCOL  *DevicePath;

  MMC_STATE                 State;
  EFI_BLOCK_IO_PROTOCOL     BlockIo;
  CARD_INFO                 CardInfo;
  EFI_MMC_HOST_PROTOCOL     *MmcHost;
} MMC_HOST_INSTANCE;

#define MMC_HOST_INSTANCE_SIGNATURE                 SIGNATURE_32('m', 'm', 'c', 'h')
#define MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS(a)     CR (a, MMC_HOST_INSTANCE, BlockIo, MMC_HOST_INSTANCE_SIGNATURE)
#define MMC_HOST_INSTANCE_FROM_LINK(a)              CR (a, MMC_HOST_INSTANCE, Link, MMC_HOST_INSTANCE_SIGNATURE)


EFI_STATUS
EFIAPI
MmcGetDriverName (
  IN  EFI_COMPONENT_NAME_PROTOCOL  *This,
  IN  CHAR8                        *Language,
  OUT CHAR16                       **DriverName
  );

EFI_STATUS
EFIAPI
MmcGetControllerName (
  IN  EFI_COMPONENT_NAME_PROTOCOL                     *This,
  IN  EFI_HANDLE                                      ControllerHandle,
  IN  EFI_HANDLE                                      ChildHandle        OPTIONAL,
  IN  CHAR8                                           *Language,
  OUT CHAR16                                          **ControllerName
  );

extern EFI_COMPONENT_NAME_PROTOCOL  gMmcComponentName;
extern EFI_COMPONENT_NAME2_PROTOCOL gMmcComponentName2;

extern EFI_DRIVER_DIAGNOSTICS2_PROTOCOL gMmcDriverDiagnostics2;

extern LIST_ENTRY mMmcHostPool;

/**
  Reset the block device.

  This function implements EFI_BLOCK_IO_PROTOCOL.Reset(). 
  It resets the block device hardware.
  ExtendedVerification is ignored in this implementation.

  @param  This                   Indicates a pointer to the calling context.
  @param  ExtendedVerification   Indicates that the driver may perform a more exhaustive
                                 verification operation of the device during reset.

  @retval EFI_SUCCESS            The block device was reset.
  @retval EFI_DEVICE_ERROR       The block device is not functioning correctly and could not be reset.

**/
EFI_STATUS
EFIAPI
MmcReset (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN BOOLEAN                  ExtendedVerification
  );

/**
  Reads the requested number of blocks from the device.

  This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks(). 
  It reads the requested number of blocks from the device.
  All the blocks are read, or an error is returned.

  @param  This                   Indicates a pointer to the calling context.
  @param  MediaId                The media ID that the read request is for.
  @param  Lba                    The starting logical block address to read from on the device.
  @param  BufferSize             The size of the Buffer in bytes.
                                 This must be a multiple of the intrinsic block size of the device.
  @param  Buffer                 A pointer to the destination buffer for the data. The caller is
                                 responsible for either having implicit or explicit ownership of the buffer.

  @retval EFI_SUCCESS            The data was read correctly from the device.
  @retval EFI_DEVICE_ERROR       The device reported an error while attempting to perform the read operation.
  @retval EFI_NO_MEDIA           There is no media in the device.
  @retval EFI_MEDIA_CHANGED      The MediaId is not for the current media.
  @retval EFI_BAD_BUFFER_SIZE    The BufferSize parameter is not a multiple of the intrinsic block size of the device.
  @retval EFI_INVALID_PARAMETER  The read request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
MmcReadBlocks (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  OUT VOID                    *Buffer
  );

/**
  Writes a specified number of blocks to the device.

  This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks(). 
  It writes a specified number of blocks to the device.
  All blocks are written, or an error is returned.

  @param  This                   Indicates a pointer to the calling context.
  @param  MediaId                The media ID that the write request is for.
  @param  Lba                    The starting logical block address to be written.
  @param  BufferSize             The size of the Buffer in bytes.
                                 This must be a multiple of the intrinsic block size of the device.
  @param  Buffer                 Pointer to the source buffer for the data.

  @retval EFI_SUCCESS            The data were written correctly to the device.
  @retval EFI_WRITE_PROTECTED    The device cannot be written to.
  @retval EFI_NO_MEDIA           There is no media in the device.
  @retval EFI_MEDIA_CHANGED      The MediaId is not for the current media.
  @retval EFI_DEVICE_ERROR       The device reported an error while attempting to perform the write operation.
  @retval EFI_BAD_BUFFER_SIZE    The BufferSize parameter is not a multiple of the intrinsic
                                 block size of the device.
  @retval EFI_INVALID_PARAMETER  The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
MmcWriteBlocks (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  IN VOID                     *Buffer
  );

/**
  Flushes all modified data to a physical block device.

  @param  This                   Indicates a pointer to the calling context.

  @retval EFI_SUCCESS            All outstanding data were written correctly to the device.
  @retval EFI_DEVICE_ERROR       The device reported an error while attempting to write data.
  @retval EFI_NO_MEDIA           There is no media in the device.

**/
EFI_STATUS
EFIAPI
MmcFlushBlocks (
  IN EFI_BLOCK_IO_PROTOCOL  *This
  );

#endif