audk/MdeModulePkg/Core/Dxe/FwVolBlock.h

301 lines
11 KiB
C
Raw Normal View History

/** @file
Firmware Volume Block protocol functions.
Consumes FV hobs and creates appropriate block protocols.
Copyright (c) 2006 - 2008, Intel Corporation. <BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _FWVOL_BLOCK_H_
#define _FWVOL_BLOCK_H_
#define FVB_DEVICE_SIGNATURE EFI_SIGNATURE_32('_','F','V','B')
typedef struct {
UINTN Base;
UINTN Length;
} LBA_CACHE;
typedef struct {
MEMMAP_DEVICE_PATH MemMapDevPath;
EFI_DEVICE_PATH_PROTOCOL EndDevPath;
} FV_DEVICE_PATH;
typedef struct {
UINTN Signature;
EFI_HANDLE Handle;
FV_DEVICE_PATH DevicePath;
EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL FwVolBlockInstance;
UINTN NumBlocks;
LBA_CACHE *LbaCache;
UINT32 FvbAttributes;
EFI_PHYSICAL_ADDRESS BaseAddress;
} EFI_FW_VOL_BLOCK_DEVICE;
#define FVB_DEVICE_FROM_THIS(a) \
CR(a, EFI_FW_VOL_BLOCK_DEVICE, FwVolBlockInstance, FVB_DEVICE_SIGNATURE)
/**
This routine is the driver initialization entry point. It initializes the
libraries, consumes FV hobs and NT_NON_MM_FV environment variable and
produces instances of FW_VOL_BLOCK_PROTOCOL as appropriate.
@param ImageHandle The image handle.
@param SystemTable The system table.
@retval EFI_SUCCESS Successfully initialized firmware volume block
driver.
**/
EFI_STATUS
EFIAPI
FwVolBlockDriverInit (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
);
/**
Retrieves Volume attributes. No polarity translations are done.
@param This Calling context
@param Attributes output buffer which contains attributes
@retval EFI_SUCCESS The firmware volume attributes were returned.
**/
EFI_STATUS
EFIAPI
FwVolBlockGetAttributes (
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
OUT EFI_FVB_ATTRIBUTES *Attributes
);
/**
Modifies the current settings of the firmware volume according to the input parameter.
@param This Calling context
@param Attributes input buffer which contains attributes
@retval EFI_SUCCESS The firmware volume attributes were returned.
@retval EFI_INVALID_PARAMETER The attributes requested are in conflict with
the capabilities as declared in the firmware
volume header.
@retval EFI_UNSUPPORTED Not supported.
**/
EFI_STATUS
EFIAPI
FwVolBlockSetAttributes (
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
IN CONST EFI_FVB_ATTRIBUTES *Attributes
);
/**
The EraseBlock() function erases one or more blocks as denoted by the
variable argument list. The entire parameter list of blocks must be verified
prior to erasing any blocks. If a block is requested that does not exist
within the associated firmware volume (it has a larger index than the last
block of the firmware volume), the EraseBlock() function must return
EFI_INVALID_PARAMETER without modifying the contents of the firmware volume.
@param This Calling context
@param ... Starting LBA followed by Number of Lba to erase.
a -1 to terminate the list.
@retval EFI_SUCCESS The erase request was successfully completed.
@retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled
state.
@retval EFI_DEVICE_ERROR The block device is not functioning correctly
and could not be written. The firmware device
may have been partially erased.
@retval EFI_INVALID_PARAMETER One or more of the LBAs listed in the variable
argument list do
@retval EFI_UNSUPPORTED Not supported.
**/
EFI_STATUS
EFIAPI
FwVolBlockEraseBlock (
IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
...
);
/**
Read the specified number of bytes from the block to the input buffer.
@param This Indicates the calling context.
@param Lba The starting logical block index to read.
@param Offset Offset into the block at which to begin reading.
@param NumBytes Pointer to a UINT32. At entry, *NumBytes
contains the total size of the buffer. At exit,
*NumBytes contains the total number of bytes
actually read.
@param Buffer Pinter to a caller-allocated buffer that
contains the destine for the read.
@retval EFI_SUCCESS The firmware volume was read successfully.
@retval EFI_BAD_BUFFER_SIZE The read was attempted across an LBA boundary.
@retval EFI_ACCESS_DENIED Access denied.
@retval EFI_DEVICE_ERROR The block device is malfunctioning and could not
be read.
**/
EFI_STATUS
EFIAPI
FwVolBlockReadBlock (
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
IN CONST EFI_LBA Lba,
IN CONST UINTN Offset,
IN OUT UINTN *NumBytes,
IN OUT UINT8 *Buffer
);
/**
Writes the specified number of bytes from the input buffer to the block.
@param This Indicates the calling context.
@param Lba The starting logical block index to write to.
@param Offset Offset into the block at which to begin writing.
@param NumBytes Pointer to a UINT32. At entry, *NumBytes
contains the total size of the buffer. At exit,
*NumBytes contains the total number of bytes
actually written.
@param Buffer Pinter to a caller-allocated buffer that
contains the source for the write.
@retval EFI_SUCCESS The firmware volume was written successfully.
@retval EFI_BAD_BUFFER_SIZE The write was attempted across an LBA boundary.
On output, NumBytes contains the total number of
bytes actually written.
@retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled
state.
@retval EFI_DEVICE_ERROR The block device is malfunctioning and could not
be written.
@retval EFI_UNSUPPORTED Not supported.
**/
EFI_STATUS
EFIAPI
FwVolBlockWriteBlock (
IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
IN EFI_LBA Lba,
IN UINTN Offset,
IN OUT UINTN *NumBytes,
IN UINT8 *Buffer
);
/**
Get Fvb's base address.
@param This Indicates the calling context.
@param Address Fvb device base address.
@retval EFI_SUCCESS Successfully got Fvb's base address.
@retval EFI_UNSUPPORTED Not supported.
**/
EFI_STATUS
EFIAPI
FwVolBlockGetPhysicalAddress (
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
OUT EFI_PHYSICAL_ADDRESS *Address
);
/**
Retrieves the size in bytes of a specific block within a firmware volume.
@param This Indicates the calling context.
@param Lba Indicates the block for which to return the
size.
@param BlockSize Pointer to a caller-allocated UINTN in which the
size of the block is returned.
@param NumberOfBlocks Pointer to a caller-allocated UINTN in which the
number of consecutive blocks starting with Lba
is returned. All blocks in this range have a
size of BlockSize.
@retval EFI_SUCCESS The firmware volume base address is returned.
@retval EFI_INVALID_PARAMETER The requested LBA is out of range.
**/
EFI_STATUS
EFIAPI
FwVolBlockGetBlockSize (
IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
IN CONST EFI_LBA Lba,
IN OUT UINTN *BlockSize,
IN OUT UINTN *NumberOfBlocks
);
/**
This routine is the driver initialization entry point. It initializes the
libraries, consumes FV hobs and NT_NON_MM_FV environment variable and
produces instances of FW_VOL_BLOCK_PROTOCOL as appropriate.
@param ImageHandle The image handle.
@param SystemTable The system table.
@retval EFI_SUCCESS Successfully initialized firmware volume block
driver.
**/
EFI_STATUS
EFIAPI
FwVolBlockDriverInit (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
);
/**
This routine produces a firmware volume block protocol on a given
buffer.
@param BaseAddress base address of the firmware volume image
@param Length length of the firmware volume image
@param ParentHandle handle of parent firmware volume, if this image
came from an FV image file in another firmware
volume (ala capsules)
@param FvProtocol Firmware volume block protocol produced.
@retval EFI_VOLUME_CORRUPTED Volume corrupted.
@retval EFI_OUT_OF_RESOURCES No enough buffer to be allocated.
@retval EFI_SUCCESS Successfully produced a FVB protocol on given
buffer.
**/
EFI_STATUS
ProduceFVBProtocolOnBuffer (
IN EFI_PHYSICAL_ADDRESS BaseAddress,
IN UINT64 Length,
IN EFI_HANDLE ParentHandle,
OUT EFI_HANDLE *FvProtocol OPTIONAL
);
#endif