tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/ArmVirtPkg/ArmVirtQemu.fdf

389 lines
14 KiB
Plaintext
Raw Normal View History

ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
# Copyright (c) 2014, Linaro Limited. All rights reserved.
ArmVirtPkg: Use the merged Variable driver Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17770 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01 05:11:05 +02:00
# Copyright (c) 2015, Intel Corporation. All rights reserved.
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.QEMU_EFI]
BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM
Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
NumBlocks = 0x200
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
#
# UEFI has trouble dealing with FVs that reside at physical address 0x0.
# So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the
# real FV at offset 0x1000
#
0x00000000|0x00001000
DATA = {
!if $(ARCH) == AARCH64
0x00, 0x04, 0x00, 0x14 # 'b 0x1000' in AArch64 ASM
!else
0xfe, 0x03, 0x00, 0xea # 'b 0x1000' in AArch32 ASM
!endif
}
0x00001000|0x001ff000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FvMain]
BlockSize = 0x40
NumBlocks = 0 # This FV gets compressed so make it just big enough
FvAlignment = 16 # FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
APRIORI DXE {
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
INF ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
}
INF MdeModulePkg/Core/Dxe/DxeMain.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
INF ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
# PI DXE Drivers producing Architectural Protocols (EFI Services)
#
INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
ArmVirtPkg: Use the merged Variable driver Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17770 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-01 05:11:05 +02:00
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
!if $(SECURE_BOOT_ENABLE) == TRUE
INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
!endif
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
#
# Multiple Console IO support
#
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF EmbeddedPkg/SerialDxe/SerialDxe.inf
INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
!if $(SECURE_BOOT_ENABLE) == TRUE
INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashAuthenticatedDxe.inf
!else
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
ArmVirtualizationPkg: Enable secure boot for ArmVirtualizationQemu This adds all the required modules and library dependencies so that the ArmVirtualizationQemu platform can be built with support for UEFI Secure Boot. This support consists of the OpenSSL crypto library (whose source needs to be downloaded separately), the authenticated variable store, and authentication of executables before launching them. Contributed-under: TianoCore Contribution Agreement 1.0 Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17356 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-07 17:22:31 +02:00
!endif
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
#
# FAT filesystem + GPT/MBR partitioning
#
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF FatBinPkg/EnhancedFatDxe/Fat.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
#
# Platform Driver
#
INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
#
# UEFI application (Shell Embedded Boot Loader)
#
ArmVirtualizationPkg: build UEFI shell from source Including a prebuilt shell executable in the firmware binary is suboptimal practice, especially given that the source code of the UEFI shell resides in the same edk2 tree. Benefits of building the shell from source are partly technical (a developer patching the shell can actually see the results), partly ideological (the nominally built-from-source firmware is actually built from source). "Security" might be worth a mention too. The stanza for the [Components.common] section of "ArmVirtualization.dsc.inc" originates from under OvmfPkg. Cc: Leif Lindholm <Leif.Lindholm@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17052 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-16 20:56:54 +01:00
INF ShellPkg/Application/Shell/Shell.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
# Bds
#
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
ArmPlatformPkg/ArmVirtualizationPkg: Added support for Intel BDS Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16208 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-13 12:55:38 +02:00
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
#
# Networking stack
#
INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
#
# SCSI Bus and Disk Driver
#
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
ArmVirtPkg/ArmVirtQemu: support SMBIOS The "MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf" driver is generic, it provides EFI_SMBIOS_PROTOCOL. The "OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf" driver downloads the SMBIOS payload from QEMU via fw_cfg. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18044 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-26 10:03:00 +02:00
#
# SMBIOS Support
#
INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
ArmVirtualizationPkg: add simple ACPI Platform Driver to the QEMU platform Introduce an ACPI platform driver for ARM / AARCH64 virtual machines. "OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf" downloads ACPI blobs from QEMU over fw_cfg, processes them, and installs the resultant ACPI tables. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16698 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-02 20:09:07 +01:00
#
# ACPI Support
#
INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
INF OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: enable PCI support Beyond including the foundational drivers in the DSC and FDF files, we enable virtio-over-PCI, and turn on QemuBootOrderLib's OFW-to-UEFI device path translation for PCI devices. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16910 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:11 +01:00
#
# PCI support
#
Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-29 15:50:43 +02:00
INF ArmVirtPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: enable PCI support Beyond including the foundational drivers in the DSC and FDF files, we enable virtio-over-PCI, and turn on QemuBootOrderLib's OFW-to-UEFI device path translation for PCI devices. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16910 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:11 +01:00
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: add VGA console output Alex Graf's QEMU patchset enables "-device VGA" for the virt machtype as well. We can now include OvmfPkg/QemuVideoDxe in the firmware, and set PcdDefaultConOutPaths such that the console output is multiplexed to the video window as well. (Our platform BDS lib doesn't (yet) locate the VGA device automatically.) OvmfPkg/PlatformDxe is included too; it allows users to select a video resolution. (Note that PcdSetupVideoHorizontalResolution and PcdSetupVideoVerticalResolution are independent; see git commit 848834cb (SVN r16311) for explanation.) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16913 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:25 +01:00
#
# Video support
#
INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf
INF OvmfPkg/PlatformDxe/Platform.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: add USB keyboard input Similarly to the previous patch, we can now multiplex input from the USB keyboard. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16914 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:30 +01:00
#
# USB Support
#
INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: include XHCI driver The "virt" machine type of qemu-system-(arm|aarch64) had no PCIe support prior to qemu commit 4ab29b82 arm: Add PCIe host bridge in virt machine With that commit, the "virt" board acquired the capability to expose an XHCI controller. Using a USB keyboard as example, the command line options were -device nec-usb-xhci -device usb-kbd However, due to a slight XHCI emulation bug in QEMU -- dating back to several years earlier -- edk2's XHCI driver would encounter a failed ASSERT(). This emulation problem has been fixed in QEMU commit aa685789 xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set and now edk2's XHCI driver works well on QEMU's "nec-usb-xhci" device. Let's enable the driver in ArmVirtualizationQemu, as XHCI emulation is reportedly more virtualization-friendly than EHCI, consuming less CPU. (ArmVirtualizationXen is not modified because it includes no USB-related drivers at all.) This patch should not regress existing QEMU command lines (ie. expose the failed ASSERT()) because QEMU's "-device nec-usb-xhci" has never before resulted in USB devices that worked with edk2 firmware builds, hence users have never had a reason to add that option. Now that they learn about XHCI support in ArmVirtualizationQemu by reading this commit message, they (or their packagers) will also know to update qemu to aa685789 or later (in practice that means the upcoming 2.3 release), at least if they want to use '-device nec-usb-xhci' with edk2, for the first time ever. Cc: Leif Lindholm <Leif.Lindholm@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Alexander Graf <agraf@suse.de> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17053 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-16 20:57:06 +01:00
INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
ArmVirtualizationPkg/ArmVirtualizationQemu: add USB keyboard input Similarly to the previous patch, we can now multiplex input from the USB keyboard. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Olivier Martin <Olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16914 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-23 17:04:30 +01:00
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
ArmVirtualizationPkg: PlatformIntelBdsLib: display TianoCore logo Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16925 6f19259b-4bc3-4df7-8a09-765794883524
2015-02-25 18:54:15 +01:00
#
# TianoCore logo (splash screen)
#
FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
SECTION RAW = MdeModulePkg/Logo/Logo.bmp
}
ArmVirtPkg/ArmVirtQemu: add LinuxLoader UEFI app to ARM build The ARM build still needs an intermediate loader to boot Linux, since ARM/Linux has no builtin UEFI boot stub (yet). So add the LinuxLoader UEFI application to the FV, and enable the FvSimpleFileSystemDxe driver so that we can invoke the Linux loader from the shell, e.g., Shell> linuxloader fs2:zImage -c console=ttyAMA0 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18155 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-04 20:41:45 +02:00
!if $(ARCH) == ARM
INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf
!endif
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
[FV.FVMAIN_COMPACT]
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
APRIORI PEI {
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
}
INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
INF ArmPkg/Drivers/CpuPei/CpuPei.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
SECTION FV_IMAGE = FVMAIN
}
}
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
############################################################################
#
#[Rule.Common.DXE_DRIVER]
# FILE DRIVER = $(NAMED_GUID) {
# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
# COMPRESS PI_STD {
# GUIDED {
# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
# UI STRING="$(MODULE_NAME)" Optional
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
# }
# }
# }
#
############################################################################
[Rule.Common.SEC]
ArmVirtPkg: use 'auto' alignment and FIXED placement for XIP modules Now that GenFw correctly propagates the minimum alignment of the ELF input sections to the PE/COFF binary, we can simply select 'auto' alignment in the FDF Rule section instead of tweaking it by hand. Also add the FIXED FFS attribute to the module types that may execute in place. This enables a newly added optimization in GenFfs that strips redundant padding, preventing excessive waste of FV space if the section alignment is considerable (i.e., 2 KB or 4 KB) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18122 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-31 10:24:18 +02:00
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
}
[Rule.Common.PEI_CORE]
ArmVirtPkg: use 'auto' alignment and FIXED placement for XIP modules Now that GenFw correctly propagates the minimum alignment of the ELF input sections to the PE/COFF binary, we can simply select 'auto' alignment in the FDF Rule section instead of tweaking it by hand. Also add the FIXED FFS attribute to the module types that may execute in place. This enables a newly added optimization in GenFfs that strips redundant padding, preventing excessive waste of FV space if the section alignment is considerable (i.e., 2 KB or 4 KB) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18122 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-31 10:24:18 +02:00
FILE PEI_CORE = $(NAMED_GUID) FIXED {
TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
UI STRING ="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM]
ArmVirtPkg: use 'auto' alignment and FIXED placement for XIP modules Now that GenFw correctly propagates the minimum alignment of the ELF input sections to the PE/COFF binary, we can simply select 'auto' alignment in the FDF Rule section instead of tweaking it by hand. Also add the FIXED FFS attribute to the module types that may execute in place. This enables a newly added optimization in GenFfs that strips redundant padding, preventing excessive waste of FV space if the section alignment is considerable (i.e., 2 KB or 4 KB) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18122 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-31 10:24:18 +02:00
FILE PEIM = $(NAMED_GUID) FIXED {
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
ArmVirtPkg: use 'auto' alignment and FIXED placement for XIP modules Now that GenFw correctly propagates the minimum alignment of the ELF input sections to the PE/COFF binary, we can simply select 'auto' alignment in the FDF Rule section instead of tweaking it by hand. Also add the FIXED FFS attribute to the module types that may execute in place. This enables a newly added optimization in GenFfs that strips redundant padding, preventing excessive waste of FV space if the section alignment is considerable (i.e., 2 KB or 4 KB) Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18122 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-31 10:24:18 +02:00
TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
ArmPlatformPkg/ArmVirtualizationPkg: Add ArmVirtualizationQemu platform This adds support for executing UEFI in a QEMU/mach-virt emulated environment. The following assumptions are made about the target: - DRAM base at 0x4000_0000, containing the device tree blob - DRAM size at least 1 MB - device tree uses 64-bit physical base addresses and sizes - ARM architected timer - Cortex-A15 CPU (if built for 32-bit) The following information is retrieved from the device tree: - PL011 UART base address - GIC base addresses - virtual timer interrupt - PL031 RTC base address - DRAM size, must be at least 128 MB - virtio MMIO transports - PSCI 0.2 availability (for reset and poweroff) The device tree image is relocated and installed as a configuration table so an EFI stub enabled kernel can be booted directly without the need for a bootloader. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Casadevall <michael.casadevall@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-By: Olivier Martin <olivier.martin@arm.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16141 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 20:11:24 +02:00
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM.TIANOCOMPRESSED]
FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
UI STRING ="$(MODULE_NAME)" Optional
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.USER_DEFINED.ACPITABLE]
FILE FREEFORM = $(NAMED_GUID) {
RAW ACPI |.acpi
RAW ASL |.aml
UI STRING="$(MODULE_NAME)" Optional
}