audk/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h

228 lines
7.0 KiB
C
Raw Normal View History

/** @file
Private Header file for Usb Host Controller PEIM
Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _RECOVERY_EHC_H_
#define _RECOVERY_EHC_H_
#include <PiPei.h>
#include <Ppi/UsbController.h>
#include <Ppi/Usb2HostController.h>
#include <Library/DebugLib.h>
#include <Library/PeimEntryPoint.h>
#include <Library/PeiServicesLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/TimerLib.h>
#include <Library/IoLib.h>
typedef struct _PEI_USB2_HC_DEV PEI_USB2_HC_DEV;
#define EFI_LIST_ENTRY LIST_ENTRY
#include "UsbHcMem.h"
#include "EhciReg.h"
#include "EhciUrb.h"
#include "EhciSched.h"
#define EFI_USB_SPEED_FULL 0x0000
#define EFI_USB_SPEED_LOW 0x0001
#define EFI_USB_SPEED_HIGH 0x0002
#define PAGESIZE 4096
#define EHC_1_MICROSECOND 1
#define EHC_1_MILLISECOND (1000 * EHC_1_MICROSECOND)
#define EHC_1_SECOND (1000 * EHC_1_MILLISECOND)
//
// EHCI register operation timeout, set by experience
//
#define EHC_RESET_TIMEOUT (1 * EHC_1_SECOND)
#define EHC_GENERIC_TIMEOUT (10 * EHC_1_MILLISECOND)
//
// Wait for roothub port power stable, refers to Spec[EHCI1.0-2.3.9]
//
#define EHC_ROOT_PORT_RECOVERY_STALL (20 * EHC_1_MILLISECOND)
//
// Sync and Async transfer polling interval, set by experience,
// and the unit of Async is 100us, means 50ms as interval.
//
#define EHC_SYNC_POLL_INTERVAL (6 * EHC_1_MILLISECOND)
#define EHC_ASYNC_POLL_INTERVAL (50 * 10000U)
//
//Iterate through the doule linked list. NOT delete safe
//
#define EFI_LIST_FOR_EACH(Entry, ListHead) \
for(Entry = (ListHead)->ForwardLink; Entry != (ListHead); Entry = Entry->ForwardLink)
//
//Iterate through the doule linked list. This is delete-safe.
//Don't touch NextEntry
//
#define EFI_LIST_FOR_EACH_SAFE(Entry, NextEntry, ListHead) \
for(Entry = (ListHead)->ForwardLink, NextEntry = Entry->ForwardLink;\
Entry != (ListHead); Entry = NextEntry, NextEntry = Entry->ForwardLink)
#define EFI_LIST_CONTAINER(Entry, Type, Field) BASE_CR(Entry, Type, Field)
#define EHC_LOW_32BIT(Addr64) ((UINT32)(((UINTN)(Addr64)) & 0XFFFFFFFF))
#define EHC_HIGH_32BIT(Addr64) ((UINT32)(RShiftU64((UINTN)(Addr64), 32) & 0XFFFFFFFF))
#define EHC_BIT_IS_SET(Data, Bit) ((BOOLEAN)(((Data) & (Bit)) == (Bit)))
#define EHC_REG_BIT_IS_SET(Ehc, Offset, Bit) \
(EHC_BIT_IS_SET(EhcReadOpReg ((Ehc), (Offset)), (Bit)))
#define USB2_HC_DEV_SIGNATURE SIGNATURE_32 ('e', 'h', 'c', 'i')
struct _PEI_USB2_HC_DEV {
UINTN Signature;
PEI_USB2_HOST_CONTROLLER_PPI Usb2HostControllerPpi;
EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
UINT32 UsbHostControllerBaseAddress;
PEI_URB *Urb;
USBHC_MEM_POOL *MemPool;
//
// Schedule data shared between asynchronous and periodic
// transfers:
// ShortReadStop, as its name indicates, is used to terminate
// the short read except the control transfer. EHCI follows
// the alternative next QTD point when a short read happens.
// For control transfer, even the short read happens, try the
// status stage.
//
PEI_EHC_QTD *ShortReadStop;
EFI_EVENT PollTimer;
//
// Asynchronous(bulk and control) transfer schedule data:
// ReclaimHead is used as the head of the asynchronous transfer
// list. It acts as the reclamation header.
//
PEI_EHC_QH *ReclaimHead;
//
// Peroidic (interrupt) transfer schedule data:
//
VOID *PeriodFrame; // Mapped as common buffer
VOID *PeriodFrameHost;
VOID *PeriodFrameMap;
PEI_EHC_QH *PeriodOne;
EFI_LIST_ENTRY AsyncIntTransfers;
//
// EHCI configuration data
//
UINT32 HcStructParams; // Cache of HC structure parameter, EHC_HCSPARAMS_OFFSET
UINT32 HcCapParams; // Cache of HC capability parameter, HCCPARAMS
UINT32 CapLen; // Capability length
UINT32 High32bitAddr;
};
#define PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS(a) CR (a, PEI_USB2_HC_DEV, Usb2HostControllerPpi, USB2_HC_DEV_SIGNATURE)
/**
@param EhcDev EHCI Device.
@retval EFI_SUCCESS EHCI successfully initialized.
@retval EFI_ABORTED EHCI was failed to be initialized.
**/
EFI_STATUS
InitializeUsbHC (
IN PEI_USB2_HC_DEV *EhcDev
);
/**
Initialize the memory management pool for the host controller.
@param Ehc The EHCI device.
@param Check4G Whether the host controller requires allocated memory
from one 4G address space.
@param Which4G The 4G memory area each memory allocated should be from.
@retval EFI_SUCCESS The memory pool is initialized.
@retval EFI_OUT_OF_RESOURCE Fail to init the memory pool.
**/
USBHC_MEM_POOL *
UsbHcInitMemPool (
IN PEI_USB2_HC_DEV *Ehc,
IN BOOLEAN Check4G,
IN UINT32 Which4G
)
;
/**
Release the memory management pool.
@param Pool The USB memory pool to free.
@retval EFI_DEVICE_ERROR Fail to free the memory pool.
@retval EFI_SUCCESS The memory pool is freed.
**/
EFI_STATUS
UsbHcFreeMemPool (
IN USBHC_MEM_POOL *Pool
)
;
/**
Allocate some memory from the host controller's memory pool
which can be used to communicate with host controller.
@param Ehc The EHCI device.
@param Pool The host controller's memory pool.
@param Size Size of the memory to allocate.
@return The allocated memory or NULL.
**/
VOID *
UsbHcAllocateMem (
IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool,
IN UINTN Size
)
;
/**
Free the allocated memory back to the memory pool.
@param Pool The memory pool of the host controller.
@param Mem The memory to free.
@param Size The size of the memory to free.
**/
VOID
UsbHcFreeMem (
IN USBHC_MEM_POOL *Pool,
IN VOID *Mem,
IN UINTN Size
)
;
#endif