tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

BaseTools/GenFw AARCH64: convert ADRP to ADR instructions if binary size allows it 

The ADRP instruction in the AArch64 ISA requires the link time and load time
offsets of a binary to be equal modulo 4 KB. The reason is that this instruction
always produces a multiple of 4 KB, and relies on a subsequent ADD or LDR
instruction to set the offset into the page. The resulting symbol reference
only produces the correct value if the symbol in question resides at that
exact offset into the page, and so loading the binary at arbitrary offsets
is not possible.

Due to the various levels of padding when packing FVs into FVs into FDs, this
alignment is very costly for XIP code, and so we would like to relax this
alignment requirement if possible.

Given that symbols that are sufficiently close (within 1 MB) of the reference
can also be reached using an ADR instruction which does not suffer from this
alignment issue, let's replace ADRP instructions with ADR after linking if
the offset can be encoded in this instruction's immediate field. Note that
this only makes sense if the section alignment is < 4 KB. Otherwise,
replacing the ADRP has no benefit, considering that the subsequent ADD or
LDR instruction is retained, and that micro-architectures are more likely
to be optimized for ADRP/ADD pairs (i.e., via micro op fusing) than for
ADR/ADD pairs, which are non-typical.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This commit is contained in:
Ard Biesheuvel 2016-07-26 16:37:37 +02:00
parent 4a8466d4ba
commit 026a82abf0
1 changed files with 46 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

59
BaseTools/Source/C/GenFw/Elf64Convert.c
View File

@ -806,26 +806,59 @@ WriteSections64 (
switch (ELF_R_TYPE(Rel->r_info)) {
case R_AARCH64_ADR_PREL_PG_HI21:
//
// AArch64 PG_H21 relocations are typically paired with ABS_LO12
// relocations, where a PC-relative reference with +/- 4 GB range is
// split into a relative high part and an absolute low part. Since
// the absolute low part represents the offset into a 4 KB page, we
// either have to convert the ADRP into an ADR instruction, or we
// need to use a section alignment of at least 4 KB, so that the
// binary appears at a correct offset at runtime. In any case, we
// have to make sure that the 4 KB relative offsets of both the
// section containing the reference as well as the section to which
// it refers have not been changed during PE/COFF conversion (i.e.,
// in ScanSections64() above).
//
if (mCoffAlignment < 0x1000) {
//
// Attempt to convert the ADRP into an ADR instruction.
// This is only possible if the symbol is within +/- 1 MB.
//
INT64 Offset;
// Decode the ADRP instruction
Offset = (INT32)((*(UINT32 *)Targ & 0xffffe0) << 8);
Offset = (Offset << (6 - 5)) | ((*(UINT32 *)Targ & 0x60000000) >> (29 - 12));
//
// ADRP offset is relative to the previous page boundary,
// whereas ADR offset is relative to the instruction itself.
// So fix up the offset so it points to the page containing
// the symbol.
//
Offset -= (UINTN)(Targ - mCoffFile) & 0xfff;
if (Offset < -0x100000 || Offset > 0xfffff) {
Error (NULL, 0, 3000, "Invalid", "WriteSections64(): %s due to its size (> 1 MB), this module requires 4 KB section alignment.",
mInImageName);
break;
}
// Re-encode the offset as an ADR instruction
*(UINT32 *)Targ &= 0x1000001f;
*(UINT32 *)Targ |= ((Offset & 0x1ffffc) << (5 - 2)) | ((Offset & 0x3) << 29);
}
/* fall through */
case R_AARCH64_ADD_ABS_LO12_NC:
case R_AARCH64_LDST8_ABS_LO12_NC:
case R_AARCH64_LDST16_ABS_LO12_NC:
case R_AARCH64_LDST32_ABS_LO12_NC:
case R_AARCH64_LDST64_ABS_LO12_NC:
case R_AARCH64_LDST128_ABS_LO12_NC:
//
// AArch64 PG_H21 relocations are typically paired with ABS_LO12
// relocations, where a PC-relative reference with +/- 4 GB range is
// split into a relative high part and an absolute low part. Since
// the absolute low part represents the offset into a 4 KB page, we
// have to make sure that the 4 KB relative offsets of both the
// section containing the reference as well as the section to which
// it refers have not been changed during PE/COFF conversion (i.e.,
// in ScanSections64() above).
//
if (((SecShdr->sh_addr ^ SecOffset) & 0xfff) != 0 ||
((SymShdr->sh_addr ^ mCoffSectionsOffset[Sym->st_shndx]) & 0xfff) != 0 ||
mCoffAlignment < 0x1000) {
Error (NULL, 0, 3000, "Invalid", "WriteSections64(): %s AARCH64 small code model requires 4 KB section alignment.",
((SymShdr->sh_addr ^ mCoffSectionsOffset[Sym->st_shndx]) & 0xfff) != 0) {
Error (NULL, 0, 3000, "Invalid", "WriteSections64(): %s AARCH64 small code model requires identical ELF and PE/COFF section offsets modulo 4 KB.",
mInImageName);
break;
}