tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

CorebootModulePkg: Fix various typos 

Fix various typos in CorebootModulePkg.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Coeur <coeur@gmx.fr>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This commit is contained in:
Antoine Coeur 2019-02-07 00:46:58 +08:00 committed by Benjamin You
parent 68f87b2572
commit 06516768ed
10 changed files with 57 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
CorebootModulePkg/Include/Library/CbParseLib.h
View File

@ -25,7 +25,7 @@ typedef RETURN_STATUS \
@param Tag The tag id to be found
@retval NULL The Tag is not found.
@retval Others The poiter to the record found.
@retval Others The pointer to the record found.
**/
VOID *
@ -51,7 +51,7 @@ CbParseMemoryInfo (
IN CB_MEM_INFO_CALLBACK MemInfoCallback,
IN VOID *pParam
);
/**
Acquire the coreboot memory table with the given table id
@ -67,11 +67,11 @@ CbParseMemoryInfo (
RETURN_STATUS
EFIAPI
CbParseCbMemTable (
IN UINT32 TableId,
IN UINT32 TableId,
IN VOID** pMemTable,
IN UINT32* pMemTableSize
);
/**
Acquire the acpi table from coreboot
@ -89,7 +89,7 @@ CbParseAcpiTable (
IN VOID** pMemTable,
IN UINT32* pMemTableSize
);
/**
Acquire the smbios table from coreboot
@ -107,14 +107,14 @@ CbParseSmbiosTable (
IN VOID** pMemTable,
IN UINT32* pMemTableSize
);
/**
Find the required fadt information
@param pPmCtrlReg Pointer to the address of power management control register
@param pPmTimerReg Pointer to the address of power management timer register
@param pResetReg Pointer to the address of system reset register
@param pResetValue Pointer to the value to be writen to the system reset register
@param pResetValue Pointer to the value to be written to the system reset register
@param pPmEvtReg Pointer to the address of power management event register
@param pPmGpeEnReg Pointer to the address of power management GPE enable register
@ -132,16 +132,16 @@ CbParseFadtInfo (
IN UINTN* pPmEvtReg,
IN UINTN* pPmGpeEnReg
);
/**
Find the serial port information
@param pRegBase Pointer to the base address of serial port registers
@param pRegAccessType Pointer to the access type of serial port registers
@param pRegWidth Pointer to the register width in bytes
@param pRegWidth Pointer to the register width in bytes
@param pBaudrate Pointer to the serial port baudrate
@param pInputHertz Pointer to the input clock frequency
@param pUartPciAddr Pointer to the UART PCI bus, dev and func address
@param pInputHertz Pointer to the input clock frequency
@param pUartPciAddr Pointer to the UART PCI bus, dev and func address
@retval RETURN_SUCCESS Successfully find the serial port information.
@retval RETURN_NOT_FOUND Failed to find the serial port information .
@ -150,12 +150,12 @@ CbParseFadtInfo (
RETURN_STATUS
EFIAPI
CbParseSerialInfo (
OUT UINT32 *pRegBase,
OUT UINT32 *pRegAccessType,
OUT UINT32 *pRegWidth,
OUT UINT32 *pBaudrate,
OUT UINT32 *pInputHertz,
OUT UINT32 *pUartPciAddr
OUT UINT32 *pRegBase,
OUT UINT32 *pRegAccessType,
OUT UINT32 *pRegWidth,
OUT UINT32 *pBaudrate,
OUT UINT32 *pInputHertz,
OUT UINT32 *pUartPciAddr
);
/**
@ -174,7 +174,7 @@ CbParseGetCbHeader (
IN UINTN Level,
IN VOID** HeaderPtr
);
/**
Find the video frame buffer information

12
CorebootModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c
View File

@ -23,7 +23,7 @@
#include <Library/BaseLib.h>
//
// PCI Defintions.
// PCI Definitions.
//
#define PCI_BRIDGE_32_BIT_IO_SPACE 0x01
@ -451,7 +451,7 @@ SerialPortWritable (
// 0 0 No cable connected. Transmit
// 0 1 No cable connected. Transmit
// 1 0 Cable connected, but not clear to send. Wait
// 1 1 Cable connected, and clar to send. Transmit
// 1 1 Cable connected, and clear to send. Transmit
//
return (BOOLEAN) ((SerialPortReadRegister (SerialRegisterBase, R_UART_MSR) & (B_UART_MSR_DSR | B_UART_MSR_CTS)) != (B_UART_MSR_DSR));
}
@ -722,7 +722,7 @@ SerialPortRead (
/**
Polls a serial device to see if there is any data waiting to be read.
Polls aserial device to see if there is any data waiting to be read.
Polls a serial device to see if there is any data waiting to be read.
If there is data waiting to be read from the serial device, then TRUE is returned.
If there is no data waiting to be read from the serial device, then FALSE is returned.
@ -903,13 +903,13 @@ SerialPortGetControl (
}
/**
Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
data bits, and stop bits on a serial device.
@param BaudRate The requested baud rate. A BaudRate value of 0 will use the
device's default interface speed.
On output, the value actually set.
@param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
@param ReceiveFifoDepth The requested depth of the FIFO on the receive side of the
serial interface. A ReceiveFifoDepth value of 0 will use
the device's default FIFO depth.
On output, the value actually set.
@ -922,7 +922,7 @@ SerialPortGetControl (
DefaultParity will use the device's default parity value.
On output, the value actually set.
@param DataBits The number of data bits to use on the serial device. A DataBits
vaule of 0 will use the device's default data bit setting.
value of 0 will use the device's default data bit setting.
On output, the value actually set.
@param StopBits The number of stop bits to use on this serial device. A StopBits
value of DefaultStopBits will use the device's default number of

6
CorebootModulePkg/Library/CbParseLib/CbParseLib.c
View File

@ -31,7 +31,7 @@
@param val The pointer to packed data.
@return the UNIT64 value after convertion.
@return the UNIT64 value after conversion.
**/
UINT64
@ -91,7 +91,7 @@ CbCheckSum16 (
@param Tag The tag id to be found
@retval NULL The Tag is not found.
@retval Others The poiter to the record found.
@retval Others The pointer to the record found.
**/
VOID *
@ -384,7 +384,7 @@ CbParseSmbiosTable (
@param pPmCtrlReg Pointer to the address of power management control register
@param pPmTimerReg Pointer to the address of power management timer register
@param pResetReg Pointer to the address of system reset register
@param pResetValue Pointer to the value to be writen to the system reset register
@param pResetValue Pointer to the value to be written to the system reset register
@param pPmEvtReg Pointer to the address of power management event register
@param pPmGpeEnReg Pointer to the address of power management GPE enable register

2
CorebootModulePkg/SataControllerDxe/SataController.h
View File

@ -91,7 +91,7 @@ typedef struct _EFI_SATA_CONTROLLER_PRIVATE_DATA {
UINT8 DeviceCount;
//
// The highest disqulified mode for each attached device,
// The highest disqualified mode for each attached device,
// From ATA/ATAPI spec, if a mode is not supported,
// the modes higher than it is also not supported
//

2
CorebootModulePkg/SecCore/FindPeiCore.c
View File

@ -146,7 +146,7 @@ FindImageBase (
/**
Find and return Pei Core entry point.
It also find SEC and PEI Core file debug inforamtion. It will report them if
It also find SEC and PEI Core file debug information. It will report them if
remote debug is enabled.
@param BootFirmwareVolumePtr Point to the boot firmware volume.

18
CorebootModulePkg/SecCore/Ia32/Stack.S
View File

@ -11,7 +11,7 @@
#
# Abstract:
#
# Switch the stack from temporary memory to permenent memory.
# Switch the stack from temporary memory to permanent memory.
#
#------------------------------------------------------------------------------
@ -36,20 +36,20 @@ ASM_PFX(SecSwitchStack):
#
# !!CAUTION!! this function address's is pushed into stack after
# migration of whole temporary memory, so need save it to permenent
# migration of whole temporary memory, so need save it to permanent
# memory at first!
#
movl 20(%esp), %ebx # Save the first parameter
movl 24(%esp), %ecx # Save the second parameter
#
# Save this function's return address into permenent memory at first.
# Then, Fixup the esp point to permenent memory
# Save this function's return address into permanent memory at first.
# Then, Fixup the esp point to permanent memory
#
movl %esp, %eax
subl %ebx, %eax
addl %ecx, %eax
movl 0(%esp), %edx # copy pushed register's value to permenent memory
movl 0(%esp), %edx # copy pushed register's value to permanent memory
movl %edx, 0(%eax)
movl 4(%esp), %edx
movl %edx, 4(%eax)
@ -57,17 +57,17 @@ ASM_PFX(SecSwitchStack):
movl %edx, 8(%eax)
movl 12(%esp), %edx
movl %edx, 12(%eax)
movl 16(%esp), %edx # Update this function's return address into permenent memory
movl 16(%esp), %edx # Update this function's return address into permanent memory
movl %edx, 16(%eax)
movl %eax, %esp # From now, esp is pointed to permenent memory
movl %eax, %esp # From now, esp is pointed to permanent memory
#
# Fixup the ebp point to permenent memory
# Fixup the ebp point to permanent memory
#
movl %ebp, %eax
subl %ebx, %eax
addl %ecx, %eax
movl %eax, %ebp # From now, ebp is pointed to permenent memory
movl %eax, %ebp # From now, ebp is pointed to permanent memory
popl %edx
popl %ecx

18
CorebootModulePkg/SecCore/Ia32/Stack.asm
View File

@ -11,7 +11,7 @@
;
; Abstract:
;
; Switch the stack from temporary memory to permenent memory.
; Switch the stack from temporary memory to permanent memory.
;
;------------------------------------------------------------------------------
@ -38,7 +38,7 @@ SecSwitchStack PROC
;
; !!CAUTION!! this function address's is pushed into stack after
; migration of whole temporary memory, so need save it to permenent
; migration of whole temporary memory, so need save it to permanent
; memory at first!
;
@ -46,13 +46,13 @@ SecSwitchStack PROC
mov ecx, [esp + 24] ; Save the second parameter
;
; Save this function's return address into permenent memory at first.
; Then, Fixup the esp point to permenent memory
; Save this function's return address into permanent memory at first.
; Then, Fixup the esp point to permanent memory
;
mov eax, esp
sub eax, ebx
add eax, ecx
mov edx, dword ptr [esp] ; copy pushed register's value to permenent memory
mov edx, dword ptr [esp] ; copy pushed register's value to permanent memory
mov dword ptr [eax], edx
mov edx, dword ptr [esp + 4]
mov dword ptr [eax + 4], edx
@ -60,17 +60,17 @@ SecSwitchStack PROC
mov dword ptr [eax + 8], edx
mov edx, dword ptr [esp + 12]
mov dword ptr [eax + 12], edx
mov edx, dword ptr [esp + 16] ; Update this function's return address into permenent memory
mov edx, dword ptr [esp + 16] ; Update this function's return address into permanent memory
mov dword ptr [eax + 16], edx
mov esp, eax ; From now, esp is pointed to permenent memory
mov esp, eax ; From now, esp is pointed to permanent memory
;
; Fixup the ebp point to permenent memory
; Fixup the ebp point to permanent memory
;
mov eax, ebp
sub eax, ebx
add eax, ecx
mov ebp, eax ; From now, ebp is pointed to permenent memory
mov ebp, eax ; From now, ebp is pointed to permanent memory
pop edx
pop ecx

2
CorebootModulePkg/SecCore/Ia32/Stack.nasm
View File

@ -64,7 +64,7 @@ ASM_PFX(SecSwitchStack):
mov esp, eax ; From now, esp is pointed to permanent memory
;
; Fixup the ebp point to permenent memory
; Fixup the ebp point to permanent memory
;
mov eax, ebp
sub eax, ebx

14
CorebootModulePkg/SecCore/SecMain.c
View File

@ -1,5 +1,5 @@
/** @file
C funtions in SEC
C functions in SEC
Copyright (c) 2013, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
@ -57,7 +57,7 @@ SecStartupPhase2(
@param SizeOfRam Size of the temporary memory available for use.
@param TempRamBase Base address of tempory ram
@param TempRamBase Base address of temporary ram
@param BootFirmwareVolume Base address of the Boot Firmware Volume.
**/
VOID
@ -100,7 +100,7 @@ SecStartup (
// |-------------------|---->
// | |
// | |
// | Heap | PeiTemporayRamSize
// | Heap | PeiTemporaryRamSize
// | |
// | |
// |-------------------|----> TempRamBase
@ -219,11 +219,11 @@ SecTemporaryRamSupport (
// |-------------------|---->
// | Stack | PeiStackSize
// |-------------------|---->
// | Heap | PeiTemporayRamSize
// | Heap | PeiTemporaryRamSize
// |-------------------|----> TempRamBase
//
// |-------------------|---->
// | Heap | PeiTemporayRamSize
// | Heap | PeiTemporaryRamSize
// |-------------------|---->
// | Stack | PeiStackSize
// |-------------------|----> PermanentMemoryBase
@ -276,8 +276,8 @@ SecTemporaryRamSupport (
//
// SecSwitchStack function must be invoked after the memory migration
// immediatly, also we need fixup the stack change caused by new call into
// permenent memory.
// immediately, also we need fixup the stack change caused by new call into
// permanent memory.
//
SecSwitchStack (
(UINT32) (UINTN) OldStack,

4
CorebootModulePkg/SecCore/SecMain.h
View File

@ -91,7 +91,7 @@ SecTemporaryRamSupport (
the control is transferred to this function.
@param SizeOfRam Size of the temporary memory available for use.
@param TempRamBase Base address of tempory ram
@param TempRamBase Base address of temporary ram
@param BootFirmwareVolume Base address of the Boot Firmware Volume.
**/
VOID
@ -105,7 +105,7 @@ SecStartup (
/**
Find and return Pei Core entry point.
It also find SEC and PEI Core file debug inforamtion. It will report them if
It also find SEC and PEI Core file debug information. It will report them if
remote debug is enabled.
@param BootFirmwareVolumePtr Point to the boot firmware volume.