ArmPkg: Allow FF-A calls to get memory region's attributes

Allow getting memory region's permissions using either of the Firmware
Framework(FF-A) ABI transport or through the earlier used SVC calls.

Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Co-developed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>

ArmPkg/Include/IndustryStandard/ArmFfaSvc.h

@@ -23,4 +23,22 @@
 #define SPM_MAJOR_VERSION_FFA                           1
 #define SPM_MINOR_VERSION_FFA                           0
 
+#define ARM_FFA_SPM_RET_SUCCESS                          0
+#define ARM_FFA_SPM_RET_NOT_SUPPORTED                   -1
+#define ARM_FFA_SPM_RET_INVALID_PARAMETERS              -2
+#define ARM_FFA_SPM_RET_NO_MEMORY                       -3
+#define ARM_FFA_SPM_RET_BUSY                            -4
+#define ARM_FFA_SPM_RET_INTERRUPTED                     -5
+#define ARM_FFA_SPM_RET_DENIED                          -6
+#define ARM_FFA_SPM_RET_RETRY                           -7
+#define ARM_FFA_SPM_RET_ABORTED                         -8
+
+// For now, the destination id to be used in the FF-A calls
+// is being hard-coded. Subsequently, support will be added
+// to get the endpoint id's dynamically
+// This is the endpoint id used by the optee os's implementation
+// of the spmc.
+// https://github.com/OP-TEE/optee_os/blob/master/core/arch/arm/kernel/stmm_sp.c#L66
+#define ARM_FFA_DESTINATION_ENDPOINT_ID                  3
+
 #endif // ARM_FFA_SVC_H_

ArmPkg/Library/StandaloneMmMmuLib/AArch64/ArmMmuStandaloneMmLib.c

@@ -17,6 +17,7 @@
 #include <Library/BaseLib.h>
 #include <Library/BaseMemoryLib.h>
 #include <Library/DebugLib.h>
+#include <Library/PcdLib.h>
 
 STATIC
 EFI_STATUS
@@ -25,20 +26,85 @@ GetMemoryPermissions (
   OUT UINT32                    *MemoryAttributes
   )
 {
+  INT32         Ret;
   ARM_SVC_ARGS  GetMemoryPermissionsSvcArgs;
+  BOOLEAN       FfaEnabled;
 
   ZeroMem (&GetMemoryPermissionsSvcArgs, sizeof (ARM_SVC_ARGS));
 
+  FfaEnabled = FeaturePcdGet (PcdFfaEnable);
+  if (FfaEnabled) {
+    GetMemoryPermissionsSvcArgs.Arg0 = ARM_SVC_ID_FFA_MSG_SEND_DIRECT_REQ_AARCH64;
+    GetMemoryPermissionsSvcArgs.Arg1 = ARM_FFA_DESTINATION_ENDPOINT_ID;
+    GetMemoryPermissionsSvcArgs.Arg2 = 0;
+    GetMemoryPermissionsSvcArgs.Arg3 = ARM_SVC_ID_SP_GET_MEM_ATTRIBUTES_AARCH64;
+    GetMemoryPermissionsSvcArgs.Arg4 = BaseAddress;
+  } else {
     GetMemoryPermissionsSvcArgs.Arg0 = ARM_SVC_ID_SP_GET_MEM_ATTRIBUTES_AARCH64;
     GetMemoryPermissionsSvcArgs.Arg1 = BaseAddress;
-
+    GetMemoryPermissionsSvcArgs.Arg2 = 0;
-  ArmCallSvc (&GetMemoryPermissionsSvcArgs);
+    GetMemoryPermissionsSvcArgs.Arg3 = 0;
-  if (GetMemoryPermissionsSvcArgs.Arg0 == ARM_SVC_SPM_RET_INVALID_PARAMS) {
+  }
-    *MemoryAttributes = 0;
+
-    return EFI_INVALID_PARAMETER;
+  *MemoryAttributes = 0;
+  ArmCallSvc (&GetMemoryPermissionsSvcArgs);
+  if (FfaEnabled) {
+    // Getting memory attributes is an atomic call, with
+    // StandaloneMm at S-EL0 being the caller and the SPM
+    // core being the callee. Thus there won't be a
+    // FFA_INTERRUPT or FFA_SUCCESS response to the Direct
+    // Request sent above. This will have to be considered
+    // for other Direct Request calls which are not atomic
+    // We therefore check only for Direct Response by the
+    // callee.
+    if (GetMemoryPermissionsSvcArgs.Arg0 !=
+        ARM_SVC_ID_FFA_MSG_SEND_DIRECT_RESP_AARCH64) {
+      // If Arg0 is not a Direct Response, that means we
+      // have an FF-A error. We need to check Arg2 for the
+      // FF-A error code.
+      Ret = GetMemoryPermissionsSvcArgs.Arg2;
+      switch (Ret) {
+      case ARM_FFA_SPM_RET_INVALID_PARAMETERS:
+
+        return EFI_INVALID_PARAMETER;
+
+      case ARM_FFA_SPM_RET_DENIED:
+        return EFI_NOT_READY;
+
+      case ARM_FFA_SPM_RET_NOT_SUPPORTED:
+        return EFI_UNSUPPORTED;
+
+      case ARM_FFA_SPM_RET_BUSY:
+        return EFI_NOT_READY;
+
+      case ARM_FFA_SPM_RET_ABORTED:
+        return EFI_ABORTED;
+      }
+    } else if (GetMemoryPermissionsSvcArgs.Arg0 ==
+               ARM_SVC_ID_FFA_MSG_SEND_DIRECT_RESP_AARCH64) {
+      // A Direct Response means FF-A success
+      // Now check the payload for errors
+      // The callee sends back the return value
+      // in Arg3
+      Ret = GetMemoryPermissionsSvcArgs.Arg3;
+    }
+  } else {
+    Ret = GetMemoryPermissionsSvcArgs.Arg0;
+  }
+
+  if (Ret & BIT31) {
+    // Bit 31 set means there is an error retured
+    switch (Ret) {
+    case ARM_SVC_SPM_RET_INVALID_PARAMS:
+      return EFI_INVALID_PARAMETER;
+
+    case ARM_SVC_SPM_RET_NOT_SUPPORTED:
+      return EFI_UNSUPPORTED;
+    }
+  } else {
+    *MemoryAttributes = Ret;
   }
 
-  *MemoryAttributes = GetMemoryPermissionsSvcArgs.Arg0;
   return EFI_SUCCESS;
 }
 

ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf

@@ -23,6 +23,9 @@
   ArmPkg/ArmPkg.dec
   MdePkg/MdePkg.dec
 
+[FeaturePcd.AARCH64]
+  gArmTokenSpaceGuid.PcdFfaEnable
+
 [LibraryClasses]
   ArmLib
   CacheMaintenanceLib