OvmfPkg: determine PMBA value dependent on host bridge device ID

In this patch, the AcpiTimerLib instances, ResetSystemLib, and PlatformPei
are modified together in order to keep VMs functional across a bisection:
they all must agree on the PMBA value used.

ResetSystemLib must not use dynamic PCDs. With SOURCE_DEBUG_ENABLE, it
gets linked into the debug agent, therefore the same restrictions apply to
it as to BaseRomAcpiTimerLib. Luckily, AcpiPmControl() is only used for
powering off the virtual machine, thus the extra cost of a PCI config
space read, compared to a PcdGet16(), should be negligible.

This is the patch that moves the PMBA to IO port 0x0600 on Q35 in
practice.

The ResetSystemLib change is easiest to verify with the "reset -s" command
in the UEFI shell (which goes through gRT->ResetSystem() and, in OVMF,
PcAtChipsetPkg/KbcResetDxe).

Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>

OvmfPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.c

@@ -37,6 +37,8 @@ AcpiTimerLibConstructor (
 {
   UINT16 HostBridgeDevId;
   UINTN Pmba;
+  UINT32 PmbaAndVal;
+  UINT32 PmbaOrVal;
   UINTN AcpiCtlReg;
   UINT8 AcpiEnBit;
 
@@ -47,11 +49,15 @@ AcpiTimerLibConstructor (
   switch (HostBridgeDevId) {
     case INTEL_82441_DEVICE_ID:
       Pmba       = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
+      PmbaAndVal = ~(UINT32)PIIX4_PMBA_MASK;
+      PmbaOrVal  = PIIX4_PMBA_VALUE;
       AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
       AcpiEnBit  = PIIX4_PMREGMISC_PMIOSE;
       break;
     case INTEL_Q35_MCH_DEVICE_ID:
       Pmba       = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
+      PmbaAndVal = ~(UINT32)ICH9_PMBASE_MASK;
+      PmbaOrVal  = ICH9_PMBASE_VALUE;
       AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
       AcpiEnBit  = ICH9_ACPI_CNTL_ACPI_EN;
       break;
@@ -70,7 +76,7 @@ AcpiTimerLibConstructor (
     // If the Power Management Base Address is not programmed,
     // then program it now.
     //
-    PciAndThenOr32 (Pmba, ~(UINT32)PIIX4_PMBA_MASK, PIIX4_PMBA_VALUE);
+    PciAndThenOr32 (Pmba, PmbaAndVal, PmbaOrVal);
 
     //
     // Enable PMBA I/O port decodes

OvmfPkg/Library/AcpiTimerLib/BaseRomAcpiTimerLib.c

@@ -35,6 +35,8 @@ AcpiTimerLibConstructor (
 {
   UINT16 HostBridgeDevId;
   UINTN Pmba;
+  UINT32 PmbaAndVal;
+  UINT32 PmbaOrVal;
   UINTN AcpiCtlReg;
   UINT8 AcpiEnBit;
 
@@ -45,11 +47,15 @@ AcpiTimerLibConstructor (
   switch (HostBridgeDevId) {
     case INTEL_82441_DEVICE_ID:
       Pmba       = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
+      PmbaAndVal = ~(UINT32)PIIX4_PMBA_MASK;
+      PmbaOrVal  = PIIX4_PMBA_VALUE;
       AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
       AcpiEnBit  = PIIX4_PMREGMISC_PMIOSE;
       break;
     case INTEL_Q35_MCH_DEVICE_ID:
       Pmba       = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
+      PmbaAndVal = ~(UINT32)ICH9_PMBASE_MASK;
+      PmbaOrVal  = ICH9_PMBASE_VALUE;
       AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
       AcpiEnBit  = ICH9_ACPI_CNTL_ACPI_EN;
       break;
@@ -68,7 +74,7 @@ AcpiTimerLibConstructor (
     // If the Power Management Base Address is not programmed,
     // then program it now.
     //
-    PciAndThenOr32 (Pmba, ~(UINT32)PIIX4_PMBA_MASK, PIIX4_PMBA_VALUE);
+    PciAndThenOr32 (Pmba, PmbaAndVal, PmbaOrVal);
 
     //
     // Enable PMBA I/O port decodes

OvmfPkg/Library/ResetSystemLib/ResetSystemLib.c

@@ -18,6 +18,7 @@
 #include <Library/DebugLib.h>
 #include <Library/IoLib.h>
 #include <Library/TimerLib.h>
+#include <OvmfPlatforms.h>
 
 #include <OvmfPlatforms.h>
 
@@ -26,10 +27,27 @@ AcpiPmControl (
   UINTN SuspendType
   )
 {
+  UINT16 AcpiPmBaseAddress;
+  UINT16 HostBridgeDevId;
+
   ASSERT (SuspendType < 6);
 
-  IoBitFieldWrite16 (PIIX4_PMBA_VALUE + 4, 10, 13, (UINT16) SuspendType);
+  AcpiPmBaseAddress = 0;
-  IoOr16 (PIIX4_PMBA_VALUE + 4, BIT13);
+  HostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
+  switch (HostBridgeDevId) {
+  case INTEL_82441_DEVICE_ID:
+    AcpiPmBaseAddress = PIIX4_PMBA_VALUE;
+    break;
+  case INTEL_Q35_MCH_DEVICE_ID:
+    AcpiPmBaseAddress = ICH9_PMBASE_VALUE;
+    break;
+  default:
+    ASSERT (FALSE);
+    CpuDeadLoop ();
+  }
+
+  IoBitFieldWrite16 (AcpiPmBaseAddress + 4, 10, 13, (UINT16) SuspendType);
+  IoOr16 (AcpiPmBaseAddress + 4, BIT13);
   CpuDeadLoop ();
 }
 

OvmfPkg/PlatformPei/Platform.c

@@ -363,6 +363,8 @@ MiscInitialization (
 {
   UINTN  PmCmd;
   UINTN  Pmba;
+  UINT32 PmbaAndVal;
+  UINT32 PmbaOrVal;
   UINTN  AcpiCtlReg;
   UINT8  AcpiEnBit;
 
@@ -385,12 +387,16 @@ MiscInitialization (
     case INTEL_82441_DEVICE_ID:
       PmCmd      = POWER_MGMT_REGISTER_PIIX4 (PCI_COMMAND_OFFSET);
       Pmba       = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
+      PmbaAndVal = ~(UINT32)PIIX4_PMBA_MASK;
+      PmbaOrVal  = PIIX4_PMBA_VALUE;
       AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
       AcpiEnBit  = PIIX4_PMREGMISC_PMIOSE;
       break;
     case INTEL_Q35_MCH_DEVICE_ID:
       PmCmd      = POWER_MGMT_REGISTER_Q35 (PCI_COMMAND_OFFSET);
       Pmba       = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
+      PmbaAndVal = ~(UINT32)ICH9_PMBASE_MASK;
+      PmbaOrVal  = ICH9_PMBASE_VALUE;
       AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
       AcpiEnBit  = ICH9_ACPI_CNTL_ACPI_EN;
       break;
@@ -412,7 +418,7 @@ MiscInitialization (
     // The PEI phase should be exited with fully accessibe ACPI PM IO space:
     // 1. set PMBA
     //
-    PciAndThenOr32 (Pmba, ~(UINT32)PIIX4_PMBA_MASK, PIIX4_PMBA_VALUE);
+    PciAndThenOr32 (Pmba, PmbaAndVal, PmbaOrVal);
 
     //
     // 2. set PCICMD/IOSE