add the PI version of EFI_S3_RESUME2_PPI defintion

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10139 6f19259b-4bc3-4df7-8a09-765794883524

MdePkg/Include/Ppi/S3Resume2.h

@@ -0,0 +1,92 @@
+/** @file
+  This PPI produces functions to interpret and execute the PI boot script table.
+  
+  This PPI is published by a PEIM and provides for the restoration of the platform's
+  configuration when resuming from the ACPI S3 power state. The ability to execute 
+  the boot script may depend on the availability of other PPIs. For example, if 
+  the boot script includes an SMBus command, this PEIM looks for the relevant PPI 
+  that is able to execute that command.  
+  
+  Copyright (c) 2010, Intel Corporation
+  All rights reserved. This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+  @par Revision Reference:
+  This PPI is defined in UEFI Platform Initialization Specification 1.2 Volume 5: 
+  Standards
+
+**/
+
+#ifndef __PEI_S3_RESUME_PPI_H__
+#define __PEI_S3_RESUME_PPI_H__
+
+///
+/// Global ID for EFI_PEI_S3_RESUME2_PPI
+///
+#define EFI_PEI_S3_RESUME2_PPI_GUID \
+  { \
+    0x6D582DBC, 0xDB85, 0x4514, {0x8F, 0xCC, 0x5A, 0xDF, 0x62, 0x27, 0xB1, 0x47 } \
+  }
+
+///
+/// Forward declaration for EFI_PEI_S3_RESUME_PPI
+///
+typedef struct _EFI_PEI_S3_RESUME2_PPI  EFI_PEI_S3_RESUME2_PPI;
+
+/**
+  Restores the platform to its preboot configuration for an S3 resume and
+  jumps to the OS waking vector.
+
+  This function will restore the platform to its pre-boot configuration that was 
+  pre-stored in the boot script table and transfer control to OS waking vector.
+  Upon invocation, this function is responsible for locating the following 
+  information before jumping to OS waking vector:
+    - ACPI tables
+    - boot script table
+    - any other information that it needs
+    
+  The S3RestoreConfig() function then executes the pre-stored boot script table 
+  and transitions the platform to the pre-boot state. The boot script is recorded 
+  during regular boot using the EFI_S3_SAVE_STATE_PROTOCOL.Write() and
+  EFI_S3_SMM_SAVE_STATE_PROTOCOL.Write() functions.  Finally, this function 
+  transfers control to the OS waking vector. If the OS supports only a real-mode 
+  waking vector, this function will switch from flat mode to real mode before 
+  jumping to the waking vector.  If all platform pre-boot configurations are 
+  successfully restored and all other necessary information is ready, this 
+  function will never return and instead will directly jump to the OS waking 
+  vector. If this function returns, it indicates that the attempt to resume 
+  from the ACPI S3 sleep state failed.  
+  
+  @param[in] This   Pointer to this instance of the PEI_S3_RESUME_PPI
+
+  @retval EFI_ABORTED     Execution of the S3 resume boot script table failed.
+  @retval EFI_NOT_FOUND   Some necessary information that is used for the S3 
+                          resume boot path could not be located.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_PEI_S3_RESUME_PPI_RESTORE_CONFIG2)(
+  IN EFI_PEI_S3_RESUME2_PPI  *This
+  );
+
+/**
+  EFI_PEI_S3_RESUME2_PPI accomplishes the firmware S3 resume boot
+  path and transfers control to OS.
+**/
+struct _EFI_PEI_S3_RESUME2_PPI {
+  ///
+  /// Restores the platform to its preboot configuration for an S3 resume and
+  /// jumps to the OS waking vector.
+  ///
+  EFI_PEI_S3_RESUME_PPI_RESTORE_CONFIG2  S3RestoreConfig2;
+};
+
+extern EFI_GUID gEfiPeiS3Resume2PpiGuid;
+
+#endif

MdePkg/MdePkg.dec

@@ -535,8 +535,8 @@
   ## Include/Ppi/BlockIo.h
   gEfiPeiVirtualBlockIoPpiGuid       = { 0x695d8aa1, 0x42ee, 0x4c46, { 0x80, 0x5c, 0x6e, 0xa6, 0xbc, 0xe7, 0x99, 0xe3 }}
 
-  ## Include/Ppi/S3Resume.h
+  ## Include/Ppi/S3Resume2.h
-  gEfiPeiS3ResumePpiGuid             = { 0x4426CCB2, 0xE684, 0x4a8a, { 0xae, 0x40, 0x20, 0xd4, 0xb0, 0x25, 0xb7, 0x10 }}
+  gEfiPeiS3Resume2PpiGuid             = { 0x6D582DBC, 0xDB85, 0x4514, {0x8F, 0xCC, 0x5A, 0xDF, 0x62, 0x27, 0xB1, 0x47 }}
 
   ## Include/Ppi/ReportStatusCodeHandler.h
   gEfiPeiRscHandlerPpiGuid           = { 0x65d394, 0x9951, 0x4144, {0x82, 0xa3, 0xa, 0xfc, 0x85, 0x79, 0xc2, 0x51 }}