CorebootPayloadPkg/PlatformBdsLib: Pass more serial parameters

Pass the serial port baudrate, register stride, input clock rate and
ID from coreboot to CorebootPayloadPkg.

Change-Id: I37111d23216e4effa2909337af7e8a6de36b61f7
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>

CorebootModulePkg/Include/Coreboot.h

@@ -165,6 +165,21 @@ struct cb_serial {
   UINT32 type;
   UINT32 baseaddr;
   UINT32 baud;
+  UINT32 regwidth;
+
+  // Crystal or input frequency to the chip containing the UART.
+  // Provide the board specific details to allow the payload to
+  // initialize the chip containing the UART and make independent
+  // decisions as to which dividers to select and their values
+  // to eventually arrive at the desired console baud-rate.
+  UINT32 input_hertz;
+
+  // UART PCI address: bus, device, function
+  // 1 << 31 - Valid bit, PCI UART in use
+  // Bus << 20
+  // Device << 15
+  // Function << 12
+  UINT32 uart_pci_addr;
 };
 
 #define CB_TAG_CONSOLE       0x00010

CorebootModulePkg/Include/Library/CbParseLib.h

@@ -113,7 +113,10 @@ CbParseFadtInfo (
 
   @param  pRegBase           Pointer to the base address of serial port registers
   @param  pRegAccessType     Pointer to the access type of serial port registers
+  @param  pRegWidth          Pointer to the register width in bytes
   @param  pBaudrate          Pointer to the serial port baudrate
+  @param  pInputHertz        Pointer to the input clock frequency
+  @param  pUartPciAddr       Pointer to the UART PCI bus, dev and func address
 
   @retval RETURN_SUCCESS     Successfully find the serial port information.
   @retval RETURN_NOT_FOUND   Failed to find the serial port information .
@@ -121,9 +124,12 @@ CbParseFadtInfo (
 **/
 RETURN_STATUS
 CbParseSerialInfo (
-  IN UINT32*     pRegBase,
+  OUT UINT32     *pRegBase,
-  IN UINT32*     pRegAccessType,
+  OUT UINT32     *pRegAccessType,
-  IN UINT32*     pBaudrate
+  OUT UINT32     *pRegWidth,
+  OUT UINT32     *pBaudrate,
+  OUT UINT32     *pInputHertz,
+  OUT UINT32     *pUartPciAddr
   );
 
 /**

CorebootModulePkg/Library/CbParseLib/CbParseLib.c

@@ -541,7 +541,10 @@ CbParseFadtInfo (
 
   @param  pRegBase           Pointer to the base address of serial port registers
   @param  pRegAccessType     Pointer to the access type of serial port registers
+  @param  pRegWidth          Pointer to the register width in bytes
   @param  pBaudrate          Pointer to the serial port baudrate
+  @param  pInputHertz        Pointer to the input clock frequency
+  @param  pUartPciAddr       Pointer to the UART PCI bus, dev and func address
 
   @retval RETURN_SUCCESS     Successfully find the serial port information.
   @retval RETURN_NOT_FOUND   Failed to find the serial port information .
@@ -551,7 +554,10 @@ RETURN_STATUS
 CbParseSerialInfo (
   OUT UINT32      *pRegBase,
   OUT UINT32      *pRegAccessType,
-  OUT UINT32      *pBaudrate
+  OUT UINT32      *pRegWidth,
+  OUT UINT32      *pBaudrate,
+  OUT UINT32      *pInputHertz,
+  OUT UINT32      *pUartPciAddr
   )
 {
   struct cb_serial    *CbSerial;
@@ -569,6 +575,10 @@ CbParseSerialInfo (
     *pRegBase = CbSerial->baseaddr;
   }
 
+  if (pRegWidth != NULL) {
+    *pRegWidth = CbSerial->regwidth;
+  }
+
   if (pRegAccessType != NULL) {
     *pRegAccessType = CbSerial->type;
   }
@@ -577,6 +587,14 @@ CbParseSerialInfo (
     *pBaudrate = CbSerial->baud;
   }
 
+  if (pInputHertz != NULL) {
+    *pInputHertz = CbSerial->input_hertz;
+  }
+
+  if (pUartPciAddr != NULL) {
+    *pUartPciAddr = CbSerial->uart_pci_addr;
+  }
+
   return RETURN_SUCCESS;
 }
 

CorebootPayloadPkg/Library/PlatformBdsLib/BdsPlatform.c

@@ -78,6 +78,10 @@ PlatformBdsInit (
   VOID
   )
 {
+  gUartDeviceNode.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
+  gUartDeviceNode.DataBits = PcdGet8 (PcdUartDefaultDataBits);
+  gUartDeviceNode.Parity   = PcdGet8 (PcdUartDefaultParity);
+  gUartDeviceNode.StopBits = PcdGet8 (PcdUartDefaultStopBits);
 }
 
 
@@ -786,6 +790,7 @@ PlatformBdsPolicyBehavior (
 
   DEBUG ((EFI_D_INFO, "PlatformBdsPolicyBehavior\n"));
   
+  PlatformBdsInit();
   ConnectRootBridge ();
 
   //

CorebootPayloadPkg/Library/PlatformBdsLib/PlatformBdsLib.inf

@@ -45,6 +45,12 @@
   DebugLib
   PcdLib
   GenericBdsLib
+  PlatformHookLib
+
 [Pcd]
   gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut
   gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits

CorebootPayloadPkg/Library/PlatformHookLib/PlatformHookLib.c

@@ -14,10 +14,23 @@
 
 #include <Base.h>
 #include <Uefi/UefiBaseType.h>
+#include <Library/PciLib.h>
 #include <Library/PlatformHookLib.h>
 #include <Library/CbParseLib.h>
 #include <Library/PcdLib.h>
 
+typedef struct {
+  UINT16  VendorId;          ///< Vendor ID to match the PCI device.  The value 0xFFFF terminates the list of entries.
+  UINT16  DeviceId;          ///< Device ID to match the PCI device
+  UINT32  ClockRate;         ///< UART clock rate.  Set to 0 for default clock rate of 1843200 Hz
+  UINT64  Offset;            ///< The byte offset into to the BAR
+  UINT8   BarIndex;          ///< Which BAR to get the UART base address
+  UINT8   RegisterStride;    ///< UART register stride in bytes.  Set to 0 for default register stride of 1 byte.
+  UINT16  ReceiveFifoDepth;  ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
+  UINT16  TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
+  UINT8   Reserved[2];
+} PCI_SERIAL_PARAMETER;
+
 /**
   Performs platform specific initialization required for the CPU to access
   the hardware associated with a SerialPortLib instance.  This function does
@@ -38,8 +51,16 @@ PlatformHookSerialPortInitialize (
   RETURN_STATUS     Status;
   UINT32            SerialRegBase;
   UINT32            SerialRegAccessType;
+  UINT32            BaudRate;
+  UINT32            RegWidth;
+  UINT32            InputHertz;
+  UINT32            PayloadParam;
+  UINT32            DeviceVendor;
+  PCI_SERIAL_PARAMETER *SerialParam;
 
-  Status = CbParseSerialInfo (&SerialRegBase, &SerialRegAccessType, NULL);
+  Status = CbParseSerialInfo (&SerialRegBase, &SerialRegAccessType,
+                              &RegWidth, &BaudRate, &InputHertz,
+                              &PayloadParam);
   if (RETURN_ERROR (Status)) {
     return Status;
   }
@@ -57,6 +78,34 @@ PlatformHookSerialPortInitialize (
     return Status;
   }
 
-  return RETURN_SUCCESS;
+  Status = PcdSet32S (PcdSerialRegisterStride, RegWidth);
+  if (RETURN_ERROR (Status)) {
+    return Status;
   }
 
+  Status = PcdSet32S (PcdSerialBaudRate, BaudRate);
+  if (RETURN_ERROR (Status)) {
+    return Status;
+  }
+
+  Status = PcdSet64S (PcdUartDefaultBaudRate, BaudRate);
+  if (RETURN_ERROR (Status)) {
+    return Status;
+  }
+
+  Status = PcdSet32S (PcdSerialClockRate, InputHertz);
+  if (RETURN_ERROR (Status)) {
+    return Status;
+  }
+
+  if (PayloadParam >= 0x80000000) {
+    DeviceVendor = PciRead32 (PayloadParam & 0x0ffff000);
+    SerialParam = PcdGetPtr(PcdPciSerialParameters);
+    SerialParam->VendorId = (UINT16)DeviceVendor;
+    SerialParam->DeviceId = DeviceVendor >> 16;
+    SerialParam->ClockRate = InputHertz;
+    SerialParam->RegisterStride = (UINT8)RegWidth;
+  }
+
+  return RETURN_SUCCESS;
+}

CorebootPayloadPkg/Library/PlatformHookLib/PlatformHookLib.inf

@@ -19,6 +19,7 @@
   MODULE_TYPE                    = BASE
   VERSION_STRING                 = 1.0
   LIBRARY_CLASS                  = PlatformHookLib
+  CONSTRUCTOR                    = PlatformHookSerialPortInitialize
 
 [Sources]
   PlatformHookLib.c
@@ -26,6 +27,7 @@
 [LibraryClasses]
   CbParseLib
   PcdLib
+  PciLib
 
 [Packages]
   MdePkg/MdePkg.dec
@@ -35,4 +37,8 @@
 [Pcd]
   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio         ## PRODUCES
   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase    ## PRODUCES
-
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate        ## PRODUCES
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride  ## PRODUCES
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate       ## PRODUCES
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate         ## PRODUCES
+  gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters   ## PRODUCES