From 26b85012802ed8a2ff3db96d102121323aabcc0c Mon Sep 17 00:00:00 2001 From: Feng Tian Date: Wed, 23 Nov 2016 09:46:32 +0800 Subject: [PATCH] MdeModulePkg/Xhci: Add 10ms delay before sending SendAddr cmd to dev We send ADDRESS DEVICE CMD in XhcInitializeDeviceSlot(), which will cause XHC issue a USB SET_ADDRESS request to the USB Device. According to USB spec, there should have a 10ms delay before this operation after resetting a given port. But in original code, there is a possible path which may have no such 10ms delay: UsbHubResetPort()->UsbHubSetPortFeature()->Stall(20)->UsbHubGetPortSt atus()->XhcPollPortStatusChange()->(if RESET_C bit is set)-> XhcInitializeDeviceSlot()->(if RESET_C bit is set)->Stall(10) So this patch is used to fix above issue. Cc: Star Zeng Cc: Baraneedharan Anbazhagan Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Feng Tian Tested-by: Baraneedharan Anbazhagan Reviewed-by: Star Zeng --- MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h | 7 ++++++- MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c | 10 +++++++++- MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.h | 8 +++++++- MdeModulePkg/Bus/Pci/XhciPei/XhciSched.c | 10 +++++++++- 4 files changed, 31 insertions(+), 4 deletions(-) diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h index 06cc73c7cb..28e240245b 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h @@ -2,7 +2,7 @@ Provides some data structure definitions used by the XHCI host controller driver. -Copyright (c) 2011 - 2015, Intel Corporation. All rights reserved.
+Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at @@ -61,6 +61,11 @@ typedef struct _USB_DEV_CONTEXT USB_DEV_CONTEXT; // #define XHC_RESET_TIMEOUT (1000) // +// TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5. +// The unit is microsecond, setting it as 10ms. +// +#define XHC_RESET_RECOVERY_DELAY (10 * 1000) +// // XHC async transfer timer interval, set by experience. // The unit is 100us, takes 1ms as interval. // diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c index e37f674760..4bec76a85f 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c @@ -2,7 +2,7 @@ XHCI transfer scheduling routines. -Copyright (c) 2011 - 2015, Intel Corporation. All rights reserved.
+Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at @@ -2115,6 +2115,10 @@ XhcInitializeDeviceSlot ( // 8) Issue an Address Device Command for the Device Slot, where the command points to the Input // Context data structure described above. // + // Delay 10ms to meet TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5 before sending SetAddress() request + // to device. + // + gBS->Stall (XHC_RESET_RECOVERY_DELAY); ZeroMem (&CmdTrbAddr, sizeof (CmdTrbAddr)); PhyAddr = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Xhc->UsbDevContext[SlotId].InputContext, sizeof (INPUT_CONTEXT)); CmdTrbAddr.PtrLo = XHC_LOW_32BIT (PhyAddr); @@ -2321,6 +2325,10 @@ XhcInitializeDeviceSlot64 ( // 8) Issue an Address Device Command for the Device Slot, where the command points to the Input // Context data structure described above. // + // Delay 10ms to meet TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5 before sending SetAddress() request + // to device. + // + gBS->Stall (XHC_RESET_RECOVERY_DELAY); ZeroMem (&CmdTrbAddr, sizeof (CmdTrbAddr)); PhyAddr = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Xhc->UsbDevContext[SlotId].InputContext, sizeof (INPUT_CONTEXT_64)); CmdTrbAddr.PtrLo = XHC_LOW_32BIT (PhyAddr); diff --git a/MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.h b/MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.h index ccf4dc26e5..99f0396494 100644 --- a/MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.h +++ b/MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.h @@ -1,7 +1,7 @@ /** @file Private Header file for Usb Host Controller PEIM -Copyright (c) 2014 - 2015, Intel Corporation. All rights reserved.
+Copyright (c) 2014 - 2016, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions @@ -52,6 +52,12 @@ typedef struct _USB_DEV_CONTEXT USB_DEV_CONTEXT; // #define XHC_RESET_TIMEOUT (1000) +// +// TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5. +// The unit is microsecond, setting it as 10ms. +// +#define XHC_RESET_RECOVERY_DELAY (10 * 1000) + // // Wait for root port state stable. // diff --git a/MdeModulePkg/Bus/Pci/XhciPei/XhciSched.c b/MdeModulePkg/Bus/Pci/XhciPei/XhciSched.c index 7f554f5710..7a63dabd8c 100644 --- a/MdeModulePkg/Bus/Pci/XhciPei/XhciSched.c +++ b/MdeModulePkg/Bus/Pci/XhciPei/XhciSched.c @@ -2,7 +2,7 @@ PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid which is used to enable recovery function from USB Drivers. -Copyright (c) 2014 - 2015, Intel Corporation. All rights reserved.
+Copyright (c) 2014 - 2016, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions @@ -1195,6 +1195,10 @@ XhcPeiInitializeDeviceSlot ( // 8) Issue an Address Device Command for the Device Slot, where the command points to the Input // Context data structure described above. // + // Delay 10ms to meet TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5 before sending SetAddress() request + // to device. + // + MicroSecondDelay (XHC_RESET_RECOVERY_DELAY); ZeroMem (&CmdTrbAddr, sizeof (CmdTrbAddr)); PhyAddr = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Xhc->UsbDevContext[SlotId].InputContext, sizeof (INPUT_CONTEXT)); CmdTrbAddr.PtrLo = XHC_LOW_32BIT (PhyAddr); @@ -1402,6 +1406,10 @@ XhcPeiInitializeDeviceSlot64 ( // 8) Issue an Address Device Command for the Device Slot, where the command points to the Input // Context data structure described above. // + // Delay 10ms to meet TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5 before sending SetAddress() request + // to device. + // + MicroSecondDelay (XHC_RESET_RECOVERY_DELAY); ZeroMem (&CmdTrbAddr, sizeof (CmdTrbAddr)); PhyAddr = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Xhc->UsbDevContext[SlotId].InputContext, sizeof (INPUT_CONTEXT_64)); CmdTrbAddr.PtrLo = XHC_LOW_32BIT (PhyAddr);