From 385fd1b846832b618bb573eacb212305dff61f06 Mon Sep 17 00:00:00 2001 From: shenglei Date: Wed, 8 Aug 2018 13:37:18 +0800 Subject: [PATCH] MdeModulePkg AtaAtapiPassThru: Remove redundant functions The functions that are never called have been removed. They are AhciCheckDeviceStatus,AhciPortReset,DRDYReady, DRDYReady2,WaitForBSYClear2 and AtaSoftReset. https://bugzilla.tianocore.org/show_bug.cgi?id=1062 v2: DRDYReady, DRDYReady2, WaitForBSYClear2 and AtaSoftReset are added to the commit message. Cc: Star Zeng Cc: Eric Dong Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: shenglei Reviewed-by: Laszlo Ersek Reviewed-by: Star Zeng --- .../Bus/Ata/AtaAtapiPassThru/AhciMode.c | 104 ------- .../Bus/Ata/AtaAtapiPassThru/IdeMode.c | 257 ------------------ 2 files changed, 361 deletions(-) diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c index 79ae11bd20..d7a8b29666 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c @@ -294,41 +294,6 @@ AhciCheckMemSet ( } } -/** - Check if the device is still on port. It also checks if the AHCI controller - supports the address and data count will be transferred. - - @param PciIo The PCI IO protocol instance. - @param Port The number of port. - - @retval EFI_SUCCESS The device is attached to port and the transfer data is - supported by AHCI controller. - @retval EFI_UNSUPPORTED The transfer address and count is not supported by AHCI - controller. - @retval EFI_NOT_READY The physical communication between AHCI controller and device - is not ready. - -**/ -EFI_STATUS -EFIAPI -AhciCheckDeviceStatus ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN UINT8 Port - ) -{ - UINT32 Data; - UINT32 Offset; - - Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SSTS; - - Data = AhciReadReg (PciIo, Offset) & EFI_AHCI_PORT_SSTS_DET_MASK; - - if (Data == EFI_AHCI_PORT_SSTS_DET_PCE) { - return EFI_SUCCESS; - } - - return EFI_NOT_READY; -} /** @@ -1361,75 +1326,6 @@ AhciStartCommand ( return EFI_SUCCESS; } -/** - Do AHCI port reset. - - @param PciIo The PCI IO protocol instance. - @param Port The number of port. - @param Timeout The timeout value of reset, uses 100ns as a unit. - - @retval EFI_DEVICE_ERROR The port reset unsuccessfully - @retval EFI_TIMEOUT The reset operation is time out. - @retval EFI_SUCCESS The port reset successfully. - -**/ -EFI_STATUS -EFIAPI -AhciPortReset ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN UINT8 Port, - IN UINT64 Timeout - ) -{ - EFI_STATUS Status; - UINT32 Offset; - - AhciClearPortStatus (PciIo, Port); - - AhciStopCommand (PciIo, Port, Timeout); - - AhciDisableFisReceive (PciIo, Port, Timeout); - - AhciEnableFisReceive (PciIo, Port, Timeout); - - Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SCTL; - - AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_SCTL_DET_INIT); - - // - // wait 5 millisecond before de-assert DET - // - MicroSecondDelay (5000); - - AhciAndReg (PciIo, Offset, (UINT32)EFI_AHCI_PORT_SCTL_MASK); - - // - // wait 5 millisecond before de-assert DET - // - MicroSecondDelay (5000); - - // - // Wait for communication to be re-established - // - Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SSTS; - Status = AhciWaitMmioSet ( - PciIo, - Offset, - EFI_AHCI_PORT_SSTS_DET_MASK, - EFI_AHCI_PORT_SSTS_DET_PCE, - Timeout - ); - - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "Port %d COMRESET failed: %r\n", Port, Status)); - return Status; - } - - Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR; - AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_ERR_CLEAR); - - return EFI_SUCCESS; -} /** Do AHCI HBA reset. diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c index 6478f7be07..79142c330d 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c @@ -627,146 +627,8 @@ DRQReady2 ( return EFI_TIMEOUT; } -/** - This function is used to poll for the DRDY bit set in the Status Register. DRDY - bit is set when the device is ready to accept command. Most ATA commands must be - sent after DRDY set except the ATAPI Packet Command. - @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure. - @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. - @param Timeout The time to complete the command, uses 100ns as a unit. - @retval EFI_SUCCESS DRDY bit set within the time out. - @retval EFI_TIMEOUT DRDY bit not set within the time out. - - @note Read Status Register will clear interrupt status. -**/ -EFI_STATUS -EFIAPI -DRDYReady ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN EFI_IDE_REGISTERS *IdeRegisters, - IN UINT64 Timeout - ) -{ - UINT64 Delay; - UINT8 StatusRegister; - UINT8 ErrorRegister; - BOOLEAN InfiniteWait; - - ASSERT (PciIo != NULL); - ASSERT (IdeRegisters != NULL); - - if (Timeout == 0) { - InfiniteWait = TRUE; - } else { - InfiniteWait = FALSE; - } - - Delay = DivU64x32(Timeout, 1000) + 1; - do { - StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus); - // - // Wait for BSY == 0, then judge if DRDY is set or ERR is set - // - if ((StatusRegister & ATA_STSREG_BSY) == 0) { - if ((StatusRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) { - ErrorRegister = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature); - - if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) { - return EFI_ABORTED; - } - return EFI_DEVICE_ERROR; - } - - if ((StatusRegister & ATA_STSREG_DRDY) == ATA_STSREG_DRDY) { - return EFI_SUCCESS; - } else { - return EFI_DEVICE_ERROR; - } - } - - // - // Stall for 100 microseconds. - // - MicroSecondDelay (100); - - Delay--; - } while (InfiniteWait || (Delay > 0)); - - return EFI_TIMEOUT; -} - -/** - This function is used to poll for the DRDY bit set in the Alternate Status Register. - DRDY bit is set when the device is ready to accept command. Most ATA commands must - be sent after DRDY set except the ATAPI Packet Command. - - @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure. - @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. - @param Timeout The time to complete the command, uses 100ns as a unit. - - @retval EFI_SUCCESS DRDY bit set within the time out. - @retval EFI_TIMEOUT DRDY bit not set within the time out. - - @note Read Alternate Status Register will clear interrupt status. - -**/ -EFI_STATUS -EFIAPI -DRDYReady2 ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN EFI_IDE_REGISTERS *IdeRegisters, - IN UINT64 Timeout - ) -{ - UINT64 Delay; - UINT8 AltRegister; - UINT8 ErrorRegister; - BOOLEAN InfiniteWait; - - ASSERT (PciIo != NULL); - ASSERT (IdeRegisters != NULL); - - if (Timeout == 0) { - InfiniteWait = TRUE; - } else { - InfiniteWait = FALSE; - } - - Delay = DivU64x32(Timeout, 1000) + 1; - do { - AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev); - // - // Wait for BSY == 0, then judge if DRDY is set or ERR is set - // - if ((AltRegister & ATA_STSREG_BSY) == 0) { - if ((AltRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) { - ErrorRegister = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature); - - if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) { - return EFI_ABORTED; - } - return EFI_DEVICE_ERROR; - } - - if ((AltRegister & ATA_STSREG_DRDY) == ATA_STSREG_DRDY) { - return EFI_SUCCESS; - } else { - return EFI_DEVICE_ERROR; - } - } - - // - // Stall for 100 microseconds. - // - MicroSecondDelay (100); - - Delay--; - } while (InfiniteWait || (Delay > 0)); - - return EFI_TIMEOUT; -} /** This function is used to poll for the BSY bit clear in the Status Register. BSY @@ -822,59 +684,6 @@ WaitForBSYClear ( return EFI_TIMEOUT; } -/** - This function is used to poll for the BSY bit clear in the Status Register. BSY - is clear when the device is not busy. Every command must be sent after device is not busy. - - @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. - @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. - @param Timeout The time to complete the command, uses 100ns as a unit. - - @retval EFI_SUCCESS BSY bit clear within the time out. - @retval EFI_TIMEOUT BSY bit not clear within the time out. - - @note Read Status Register will clear interrupt status. -**/ -EFI_STATUS -EFIAPI -WaitForBSYClear2 ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN EFI_IDE_REGISTERS *IdeRegisters, - IN UINT64 Timeout - ) -{ - UINT64 Delay; - UINT8 AltStatusRegister; - BOOLEAN InfiniteWait; - - ASSERT (PciIo != NULL); - ASSERT (IdeRegisters != NULL); - - if (Timeout == 0) { - InfiniteWait = TRUE; - } else { - InfiniteWait = FALSE; - } - - Delay = DivU64x32(Timeout, 1000) + 1; - do { - AltStatusRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev); - - if ((AltStatusRegister & ATA_STSREG_BSY) == 0x00) { - return EFI_SUCCESS; - } - - // - // Stall for 100 microseconds. - // - MicroSecondDelay (100); - - Delay--; - - } while (InfiniteWait || (Delay > 0)); - - return EFI_TIMEOUT; -} /** Get IDE i/o port registers' base addresses by mode. @@ -1017,72 +826,6 @@ GetIdeRegisterIoAddr ( return EFI_SUCCESS; } -/** - This function is used to implement the Soft Reset on the specified device. But, - the ATA Soft Reset mechanism is so strong a reset method that it will force - resetting on both devices connected to the same cable. - - It is called by IdeBlkIoReset(), a interface function of Block - I/O protocol. - - This function can also be used by the ATAPI device to perform reset when - ATAPI Reset command is failed. - - @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. - @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. - @param Timeout The time to complete the command, uses 100ns as a unit. - - @retval EFI_SUCCESS Soft reset completes successfully. - @retval EFI_DEVICE_ERROR Any step during the reset process is failed. - - @note The registers initial values after ATA soft reset are different - to the ATA device and ATAPI device. -**/ -EFI_STATUS -EFIAPI -AtaSoftReset ( - IN EFI_PCI_IO_PROTOCOL *PciIo, - IN EFI_IDE_REGISTERS *IdeRegisters, - IN UINT64 Timeout - ) -{ - UINT8 DeviceControl; - - DeviceControl = 0; - // - // disable Interrupt and set SRST bit to initiate soft reset - // - DeviceControl = ATA_CTLREG_SRST | ATA_CTLREG_IEN_L; - - IdeWritePortB (PciIo, IdeRegisters->AltOrDev, DeviceControl); - - // - // SRST should assert for at least 5 us, we use 10 us for - // better compatibility - // - MicroSecondDelay (10); - - // - // Enable interrupt to support UDMA, and clear SRST bit - // - DeviceControl = 0; - IdeWritePortB (PciIo, IdeRegisters->AltOrDev, DeviceControl); - - // - // Wait for at least 10 ms to check BSY status, we use 10 ms - // for better compatibility - // - MicroSecondDelay (10000); - - // - // slave device needs at most 31ms to clear BSY - // - if (WaitForBSYClear (PciIo, IdeRegisters, Timeout) == EFI_TIMEOUT) { - return EFI_DEVICE_ERROR; - } - - return EFI_SUCCESS; -} /** Send ATA Ext command into device with NON_DATA protocol.