mirror of https://github.com/acidanthera/audk.git
Import UndiRuntimeDxe.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@3563 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
yshang1
parent
370856f9a0
commit
40834173c5
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,668 @@
|
|||
/*++
|
||||
|
||||
Copyright (c) 2006, Intel Corporation
|
||||
All rights reserved. This program and the accompanying materials
|
||||
are licensed and made available under the terms and conditions of the BSD License
|
||||
which accompanies this distribution. The full text of the license may be found at
|
||||
http://opensource.org/licenses/bsd-license.php
|
||||
|
||||
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||||
|
||||
Module Name:
|
||||
|
||||
E100B.H
|
||||
|
||||
Abstract:
|
||||
|
||||
|
||||
Revision History
|
||||
|
||||
--*/
|
||||
// pci config offsets:
|
||||
|
||||
#define RX_BUFFER_COUNT 32
|
||||
#define TX_BUFFER_COUNT 32
|
||||
|
||||
#define PCI_VENDOR_ID_INTEL 0x8086
|
||||
#define PCI_DEVICE_ID_INTEL_82557 0x1229
|
||||
#define D100_VENDOR_ID 0x8086
|
||||
#define D100_DEVICE_ID 0x1229
|
||||
#define D102_DEVICE_ID 0x2449
|
||||
|
||||
#define ICH3_DEVICE_ID_1 0x1031
|
||||
#define ICH3_DEVICE_ID_2 0x1032
|
||||
#define ICH3_DEVICE_ID_3 0x1033
|
||||
#define ICH3_DEVICE_ID_4 0x1034
|
||||
#define ICH3_DEVICE_ID_5 0x1035
|
||||
#define ICH3_DEVICE_ID_6 0x1036
|
||||
#define ICH3_DEVICE_ID_7 0x1037
|
||||
#define ICH3_DEVICE_ID_8 0x1038
|
||||
|
||||
#define SPEEDO_DEVICE_ID 0x1227
|
||||
#define SPLASH1_DEVICE_ID 0x1226
|
||||
|
||||
|
||||
// bit fields for the command
|
||||
#define PCI_COMMAND_MASTER 0x04 // bit 2
|
||||
#define PCI_COMMAND_IO 0x01 // bit 0
|
||||
#define PCI_COMMAND 0x04
|
||||
#define PCI_LATENCY_TIMER 0x0D
|
||||
|
||||
#define ETHER_MAC_ADDR_LEN 6
|
||||
#ifdef AVL_XXX
|
||||
#define ETHER_HEADER_LEN 14
|
||||
// media interface type
|
||||
// #define INTERFACE_TYPE "
|
||||
|
||||
// Hardware type values
|
||||
#define HW_ETHER_TYPE 1
|
||||
#define HW_EXPERIMENTAL_ETHER_TYPE 2
|
||||
#define HW_IEEE_TYPE 6
|
||||
#define HW_ARCNET_TYPE 7
|
||||
|
||||
#endif // AVL_XXX
|
||||
|
||||
#define MAX_ETHERNET_PKT_SIZE 1514 // including eth header
|
||||
#define RX_BUFFER_SIZE 1536 // including crc and padding
|
||||
#define TX_BUFFER_SIZE 64
|
||||
#define ETH_MTU 1500 // does not include ethernet header length
|
||||
|
||||
#define SPEEDO3_TOTAL_SIZE 0x20
|
||||
|
||||
#pragma pack(1)
|
||||
|
||||
typedef struct eth {
|
||||
UINT8 dest_addr[PXE_HWADDR_LEN_ETHER];
|
||||
UINT8 src_addr[PXE_HWADDR_LEN_ETHER];
|
||||
UINT16 type;
|
||||
} EtherHeader;
|
||||
|
||||
#pragma pack(1)
|
||||
typedef struct CONFIG_HEADER {
|
||||
UINT16 VendorID;
|
||||
UINT16 DeviceID;
|
||||
UINT16 Command;
|
||||
UINT16 Status;
|
||||
UINT16 RevID;
|
||||
UINT16 ClassID;
|
||||
UINT8 CacheLineSize;
|
||||
UINT8 LatencyTimer;
|
||||
UINT8 HeaderType; // must be zero to impose this structure...
|
||||
UINT8 BIST; // built-in self test
|
||||
UINT32 BaseAddressReg_0; // memory mapped address
|
||||
UINT32 BaseAddressReg_1; //io mapped address, Base IO address
|
||||
UINT32 BaseAddressReg_2; // option rom address
|
||||
UINT32 BaseAddressReg_3;
|
||||
UINT32 BaseAddressReg_4;
|
||||
UINT32 BaseAddressReg_5;
|
||||
UINT32 CardBusCISPtr;
|
||||
UINT16 SubVendorID;
|
||||
UINT16 SubSystemID;
|
||||
UINT32 ExpansionROMBaseAddr;
|
||||
UINT8 CapabilitiesPtr;
|
||||
UINT8 reserved1;
|
||||
UINT16 Reserved2;
|
||||
UINT32 Reserved3;
|
||||
UINT8 int_line;
|
||||
UINT8 int_pin;
|
||||
UINT8 Min_gnt;
|
||||
UINT8 Max_lat;
|
||||
} PCI_CONFIG_HEADER;
|
||||
#pragma pack()
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Offsets to the various registers.
|
||||
// All accesses need not be longword aligned.
|
||||
//-------------------------------------------------------------------------
|
||||
enum speedo_offsets {
|
||||
SCBStatus = 0, SCBCmd = 2, // Rx/Command Unit command and status.
|
||||
SCBPointer = 4, // General purpose pointer.
|
||||
SCBPort = 8, // Misc. commands and operands.
|
||||
SCBflash = 12, SCBeeprom = 14, // EEPROM and flash memory control.
|
||||
SCBCtrlMDI = 16, // MDI interface control.
|
||||
SCBEarlyRx = 20, // Early receive byte count.
|
||||
SCBEarlyRxInt = 24, SCBFlowCtrlReg = 25, SCBPmdr = 27,
|
||||
// offsets for general control registers (GCRs)
|
||||
SCBGenCtrl = 28, SCBGenStatus = 29, SCBGenCtrl2 = 30, SCBRsvd = 31
|
||||
};
|
||||
|
||||
#define GCR2_EEPROM_ACCESS_SEMAPHORE 0x80 // bit offset into the gcr2
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Action commands - Commands that can be put in a command list entry.
|
||||
//-------------------------------------------------------------------------
|
||||
enum commands {
|
||||
CmdNOp = 0, CmdIASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
|
||||
CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7,
|
||||
CmdSuspend = 0x4000, /* Suspend after completion. */
|
||||
CmdIntr = 0x2000, /* Interrupt after completion. */
|
||||
CmdTxFlex = 0x0008 /* Use "Flexible mode" for CmdTx command. */
|
||||
};
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// port commands
|
||||
//-------------------------------------------------------------------------
|
||||
#define PORT_RESET 0
|
||||
#define PORT_SELF_TEST 1
|
||||
#define POR_SELECTIVE_RESET 2
|
||||
#define PORT_DUMP_POINTER 2
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// SCB Command Word bit definitions
|
||||
//-------------------------------------------------------------------------
|
||||
//- CUC fields
|
||||
#define CU_START 0x0010
|
||||
#define CU_RESUME 0x0020
|
||||
#define CU_STATSADDR 0x0040
|
||||
#define CU_SHOWSTATS 0x0050 /* Dump statistics counters. */
|
||||
#define CU_CMD_BASE 0x0060 /* Base address to add to add CU commands. */
|
||||
#define CU_DUMPSTATS 0x0070 /* Dump then reset stats counters. */
|
||||
|
||||
//- RUC fields
|
||||
#define RX_START 0x0001
|
||||
#define RX_RESUME 0x0002
|
||||
#define RX_ABORT 0x0004
|
||||
#define RX_ADDR_LOAD 0x0006 /* load ru_base_reg */
|
||||
#define RX_RESUMENR 0x0007
|
||||
|
||||
// Interrupt fields (assuming byte addressing)
|
||||
#define INT_MASK 0x0100
|
||||
#define DRVR_INT 0x0200 /* Driver generated interrupt. */
|
||||
|
||||
//- CB Status Word
|
||||
#define CMD_STATUS_COMPLETE 0x8000
|
||||
#define RX_STATUS_COMPLETE 0x8000
|
||||
#define CMD_STATUS_MASK 0xF000
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
//- SCB Status bits:
|
||||
// Interrupts are ACKed by writing to the upper 6 interrupt bits
|
||||
//-------------------------------------------------------------------------
|
||||
#define SCB_STATUS_MASK 0xFC00 // bits 2-7 - STATUS/ACK Mask
|
||||
#define SCB_STATUS_CX_TNO 0x8000 // BIT_15 - CX or TNO Interrupt
|
||||
#define SCB_STATUS_FR 0x4000 // BIT_14 - FR Interrupt
|
||||
#define SCB_STATUS_CNA 0x2000 // BIT_13 - CNA Interrupt
|
||||
#define SCB_STATUS_RNR 0x1000 // BIT_12 - RNR Interrupt
|
||||
#define SCB_STATUS_MDI 0x0800 // BIT_11 - MDI R/W Done Interrupt
|
||||
#define SCB_STATUS_SWI 0x0400 // BIT_10 - SWI Interrupt
|
||||
|
||||
// CU STATUS: bits 6 & 7
|
||||
#define SCB_STATUS_CU_MASK 0x00C0 // bits 6 & 7
|
||||
#define SCB_STATUS_CU_IDLE 0x0000 // 00
|
||||
#define SCB_STATUS_CU_SUSPEND 0x0040 // 01
|
||||
#define SCB_STATUS_CU_ACTIVE 0x0080 // 10
|
||||
|
||||
// RU STATUS: bits 2-5
|
||||
#define SCB_RUS_IDLE 0x0000
|
||||
#define SCB_RUS_SUSPENDED 0x0004 // bit 2
|
||||
#define SCB_RUS_NO_RESOURCES 0x0008 // bit 3
|
||||
#define SCB_RUS_READY 0x0010 // bit 4
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Bit Mask definitions
|
||||
//-------------------------------------------------------------------------
|
||||
#define BIT_0 0x0001
|
||||
#define BIT_1 0x0002
|
||||
#define BIT_2 0x0004
|
||||
#define BIT_3 0x0008
|
||||
#define BIT_4 0x0010
|
||||
#define BIT_5 0x0020
|
||||
#define BIT_6 0x0040
|
||||
#define BIT_7 0x0080
|
||||
#define BIT_8 0x0100
|
||||
#define BIT_9 0x0200
|
||||
#define BIT_10 0x0400
|
||||
#define BIT_11 0x0800
|
||||
#define BIT_12 0x1000
|
||||
#define BIT_13 0x2000
|
||||
#define BIT_14 0x4000
|
||||
#define BIT_15 0x8000
|
||||
#define BIT_24 0x01000000
|
||||
#define BIT_28 0x10000000
|
||||
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// MDI Control register bit definitions
|
||||
//-------------------------------------------------------------------------
|
||||
#define MDI_DATA_MASK BIT_0_15 // MDI Data port
|
||||
#define MDI_REG_ADDR BIT_16_20 // which MDI register to read/write
|
||||
#define MDI_PHY_ADDR BIT_21_25 // which PHY to read/write
|
||||
#define MDI_PHY_OPCODE BIT_26_27 // which PHY to read/write
|
||||
#define MDI_PHY_READY BIT_28 // PHY is ready for another MDI cycle
|
||||
#define MDI_PHY_INT_ENABLE BIT_29 // Assert INT at MDI cycle completion
|
||||
|
||||
#define BIT_0_2 0x0007
|
||||
#define BIT_0_3 0x000F
|
||||
#define BIT_0_4 0x001F
|
||||
#define BIT_0_5 0x003F
|
||||
#define BIT_0_6 0x007F
|
||||
#define BIT_0_7 0x00FF
|
||||
#define BIT_0_8 0x01FF
|
||||
#define BIT_0_13 0x3FFF
|
||||
#define BIT_0_15 0xFFFF
|
||||
#define BIT_1_2 0x0006
|
||||
#define BIT_1_3 0x000E
|
||||
#define BIT_2_5 0x003C
|
||||
#define BIT_3_4 0x0018
|
||||
#define BIT_4_5 0x0030
|
||||
#define BIT_4_6 0x0070
|
||||
#define BIT_4_7 0x00F0
|
||||
#define BIT_5_7 0x00E0
|
||||
#define BIT_5_9 0x03E0
|
||||
#define BIT_5_12 0x1FE0
|
||||
#define BIT_5_15 0xFFE0
|
||||
#define BIT_6_7 0x00c0
|
||||
#define BIT_7_11 0x0F80
|
||||
#define BIT_8_10 0x0700
|
||||
#define BIT_9_13 0x3E00
|
||||
#define BIT_12_15 0xF000
|
||||
|
||||
#define BIT_16_20 0x001F0000
|
||||
#define BIT_21_25 0x03E00000
|
||||
#define BIT_26_27 0x0C000000
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// MDI Control register opcode definitions
|
||||
//-------------------------------------------------------------------------
|
||||
#define MDI_WRITE 1 // Phy Write
|
||||
#define MDI_READ 2 // Phy read
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// PHY 100 MDI Register/Bit Definitions
|
||||
//-------------------------------------------------------------------------
|
||||
// MDI register set
|
||||
#define MDI_CONTROL_REG 0x00 // MDI control register
|
||||
#define MDI_STATUS_REG 0x01 // MDI Status regiser
|
||||
#define PHY_ID_REG_1 0x02 // Phy indentification reg (word 1)
|
||||
#define PHY_ID_REG_2 0x03 // Phy indentification reg (word 2)
|
||||
#define AUTO_NEG_ADVERTISE_REG 0x04 // Auto-negotiation advertisement
|
||||
#define AUTO_NEG_LINK_PARTNER_REG 0x05 // Auto-negotiation link partner ability
|
||||
#define AUTO_NEG_EXPANSION_REG 0x06 // Auto-negotiation expansion
|
||||
#define AUTO_NEG_NEXT_PAGE_REG 0x07 // Auto-negotiation next page transmit
|
||||
#define EXTENDED_REG_0 0x10 // Extended reg 0 (Phy 100 modes)
|
||||
#define EXTENDED_REG_1 0x14 // Extended reg 1 (Phy 100 error indications)
|
||||
#define NSC_CONG_CONTROL_REG 0x17 // National (TX) congestion control
|
||||
#define NSC_SPEED_IND_REG 0x19 // National (TX) speed indication
|
||||
|
||||
// MDI Control register bit definitions
|
||||
#define MDI_CR_COLL_TEST_ENABLE BIT_7 // Collision test enable
|
||||
#define MDI_CR_FULL_HALF BIT_8 // FDX =1, half duplex =0
|
||||
#define MDI_CR_RESTART_AUTO_NEG BIT_9 // Restart auto negotiation
|
||||
#define MDI_CR_ISOLATE BIT_10 // Isolate PHY from MII
|
||||
#define MDI_CR_POWER_DOWN BIT_11 // Power down
|
||||
#define MDI_CR_AUTO_SELECT BIT_12 // Auto speed select enable
|
||||
#define MDI_CR_10_100 BIT_13 // 0 = 10Mbs, 1 = 100Mbs
|
||||
#define MDI_CR_LOOPBACK BIT_14 // 0 = normal, 1 = loopback
|
||||
#define MDI_CR_RESET BIT_15 // 0 = normal, 1 = PHY reset
|
||||
|
||||
// MDI Status register bit definitions
|
||||
#define MDI_SR_EXT_REG_CAPABLE BIT_0 // Extended register capabilities
|
||||
#define MDI_SR_JABBER_DETECT BIT_1 // Jabber detected
|
||||
#define MDI_SR_LINK_STATUS BIT_2 // Link Status -- 1 = link
|
||||
#define MDI_SR_AUTO_SELECT_CAPABLE BIT_3 // Auto speed select capable
|
||||
#define MDI_SR_REMOTE_FAULT_DETECT BIT_4 // Remote fault detect
|
||||
#define MDI_SR_AUTO_NEG_COMPLETE BIT_5 // Auto negotiation complete
|
||||
#define MDI_SR_10T_HALF_DPX BIT_11 // 10BaseT Half Duplex capable
|
||||
#define MDI_SR_10T_FULL_DPX BIT_12 // 10BaseT full duplex capable
|
||||
#define MDI_SR_TX_HALF_DPX BIT_13 // TX Half Duplex capable
|
||||
#define MDI_SR_TX_FULL_DPX BIT_14 // TX full duplex capable
|
||||
#define MDI_SR_T4_CAPABLE BIT_15 // T4 capable
|
||||
|
||||
// Auto-Negotiation advertisement register bit definitions
|
||||
#define NWAY_AD_SELCTOR_FIELD BIT_0_4 // identifies supported protocol
|
||||
#define NWAY_AD_ABILITY BIT_5_12 // technologies that are supported
|
||||
#define NWAY_AD_10T_HALF_DPX BIT_5 // 10BaseT Half Duplex capable
|
||||
#define NWAY_AD_10T_FULL_DPX BIT_6 // 10BaseT full duplex capable
|
||||
#define NWAY_AD_TX_HALF_DPX BIT_7 // TX Half Duplex capable
|
||||
#define NWAY_AD_TX_FULL_DPX BIT_8 // TX full duplex capable
|
||||
#define NWAY_AD_T4_CAPABLE BIT_9 // T4 capable
|
||||
#define NWAY_AD_REMOTE_FAULT BIT_13 // indicates local remote fault
|
||||
#define NWAY_AD_RESERVED BIT_14 // reserved
|
||||
#define NWAY_AD_NEXT_PAGE BIT_15 // Next page (not supported)
|
||||
|
||||
// Auto-Negotiation link partner ability register bit definitions
|
||||
#define NWAY_LP_SELCTOR_FIELD BIT_0_4 // identifies supported protocol
|
||||
#define NWAY_LP_ABILITY BIT_5_9 // technologies that are supported
|
||||
#define NWAY_LP_REMOTE_FAULT BIT_13 // indicates partner remote fault
|
||||
#define NWAY_LP_ACKNOWLEDGE BIT_14 // acknowledge
|
||||
#define NWAY_LP_NEXT_PAGE BIT_15 // Next page (not supported)
|
||||
|
||||
// Auto-Negotiation expansion register bit definitions
|
||||
#define NWAY_EX_LP_NWAY BIT_0 // link partner is NWAY
|
||||
#define NWAY_EX_PAGE_RECEIVED BIT_1 // link code word received
|
||||
#define NWAY_EX_NEXT_PAGE_ABLE BIT_2 // local is next page able
|
||||
#define NWAY_EX_LP_NEXT_PAGE_ABLE BIT_3 // partner is next page able
|
||||
#define NWAY_EX_PARALLEL_DET_FLT BIT_4 // parallel detection fault
|
||||
#define NWAY_EX_RESERVED BIT_5_15 // reserved
|
||||
|
||||
|
||||
// PHY 100 Extended Register 0 bit definitions
|
||||
#define PHY_100_ER0_FDX_INDIC BIT_0 // 1 = FDX, 0 = half duplex
|
||||
#define PHY_100_ER0_SPEED_INDIC BIT_1 // 1 = 100mbs, 0= 10mbs
|
||||
#define PHY_100_ER0_WAKE_UP BIT_2 // Wake up DAC
|
||||
#define PHY_100_ER0_RESERVED BIT_3_4 // Reserved
|
||||
#define PHY_100_ER0_REV_CNTRL BIT_5_7 // Revsion control (A step = 000)
|
||||
#define PHY_100_ER0_FORCE_FAIL BIT_8 // Force Fail is enabled
|
||||
#define PHY_100_ER0_TEST BIT_9_13 // Revsion control (A step = 000)
|
||||
#define PHY_100_ER0_LINKDIS BIT_14 // Link integrity test is disabled
|
||||
#define PHY_100_ER0_JABDIS BIT_15 // Jabber function is disabled
|
||||
|
||||
|
||||
// PHY 100 Extended Register 1 bit definitions
|
||||
#define PHY_100_ER1_RESERVED BIT_0_8 // Reserved
|
||||
#define PHY_100_ER1_CH2_DET_ERR BIT_9 // Channel 2 EOF detection error
|
||||
#define PHY_100_ER1_MANCH_CODE_ERR BIT_10 // Manchester code error
|
||||
#define PHY_100_ER1_EOP_ERR BIT_11 // EOP error
|
||||
#define PHY_100_ER1_BAD_CODE_ERR BIT_12 // bad code error
|
||||
#define PHY_100_ER1_INV_CODE_ERR BIT_13 // invalid code error
|
||||
#define PHY_100_ER1_DC_BAL_ERR BIT_14 // DC balance error
|
||||
#define PHY_100_ER1_PAIR_SKEW_ERR BIT_15 // Pair skew error
|
||||
|
||||
// National Semiconductor TX phy congestion control register bit definitions
|
||||
#define NSC_TX_CONG_TXREADY BIT_10 // Makes TxReady an input
|
||||
#define NSC_TX_CONG_ENABLE BIT_8 // Enables congestion control
|
||||
#define NSC_TX_CONG_F_CONNECT BIT_5 // Enables congestion control
|
||||
|
||||
// National Semiconductor TX phy speed indication register bit definitions
|
||||
#define NSC_TX_SPD_INDC_SPEED BIT_6 // 0 = 100mb, 1=10mb
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Phy related constants
|
||||
//-------------------------------------------------------------------------
|
||||
#define PHY_503 0
|
||||
#define PHY_100_A 0x000003E0
|
||||
#define PHY_100_C 0x035002A8
|
||||
#define PHY_TX_ID 0x015002A8
|
||||
#define PHY_NSC_TX 0x5c002000
|
||||
#define PHY_OTHER 0xFFFF
|
||||
|
||||
#define PHY_MODEL_REV_ID_MASK 0xFFF0FFFF
|
||||
#define PARALLEL_DETECT 0
|
||||
#define N_WAY 1
|
||||
|
||||
#define RENEGOTIATE_TIME 35 // (3.5 Seconds)
|
||||
|
||||
#define CONNECTOR_AUTO 0
|
||||
#define CONNECTOR_TPE 1
|
||||
#define CONNECTOR_MII 2
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
|
||||
/* The Speedo3 Rx and Tx frame/buffer descriptors. */
|
||||
#pragma pack(1)
|
||||
struct CB_Header { /* A generic descriptor. */
|
||||
UINT16 status; /* Offset 0. */
|
||||
UINT16 command; /* Offset 2. */
|
||||
UINT32 link; /* struct descriptor * */
|
||||
};
|
||||
|
||||
/* transmit command block structure */
|
||||
#pragma pack(1)
|
||||
typedef struct s_TxCB {
|
||||
struct CB_Header cb_header;
|
||||
UINT32 PhysTBDArrayAddres; /* address of an array that contains
|
||||
physical TBD pointers */
|
||||
UINT16 ByteCount; /* immediate data count = 0 always */
|
||||
UINT8 Threshold;
|
||||
UINT8 TBDCount;
|
||||
UINT8 ImmediateData[TX_BUFFER_SIZE];
|
||||
/* following fields are not seen by the 82557 */
|
||||
struct TBD {
|
||||
UINT32 phys_buf_addr;
|
||||
UINT32 buf_len;
|
||||
} TBDArray[MAX_XMIT_FRAGMENTS];
|
||||
UINT32 PhysArrayAddr; /* in case the one in the header is lost */
|
||||
UINT32 PhysTCBAddress; /* for this TCB */
|
||||
struct s_TxCB *NextTCBVirtualLinkPtr;
|
||||
struct s_TxCB *PrevTCBVirtualLinkPtr;
|
||||
UINT64 free_data_ptr; // to be given to the upper layer when this xmit completes1
|
||||
}TxCB;
|
||||
|
||||
/* The Speedo3 Rx and Tx buffer descriptors. */
|
||||
#pragma pack(1)
|
||||
typedef struct s_RxFD { /* Receive frame descriptor. */
|
||||
struct CB_Header cb_header;
|
||||
UINT32 rx_buf_addr; /* VOID * */
|
||||
UINT16 ActualCount;
|
||||
UINT16 RFDSize;
|
||||
UINT8 RFDBuffer[RX_BUFFER_SIZE];
|
||||
UINT8 forwarded;
|
||||
UINT8 junk[3];
|
||||
}RxFD;
|
||||
|
||||
/* Elements of the RxFD.status word. */
|
||||
#define RX_COMPLETE 0x8000
|
||||
#define RX_FRAME_OK 0x2000
|
||||
|
||||
/* Elements of the dump_statistics block. This block must be lword aligned. */
|
||||
#pragma pack(1)
|
||||
struct speedo_stats {
|
||||
UINT32 tx_good_frames;
|
||||
UINT32 tx_coll16_errs;
|
||||
UINT32 tx_late_colls;
|
||||
UINT32 tx_underruns;
|
||||
UINT32 tx_lost_carrier;
|
||||
UINT32 tx_deferred;
|
||||
UINT32 tx_one_colls;
|
||||
UINT32 tx_multi_colls;
|
||||
UINT32 tx_total_colls;
|
||||
UINT32 rx_good_frames;
|
||||
UINT32 rx_crc_errs;
|
||||
UINT32 rx_align_errs;
|
||||
UINT32 rx_resource_errs;
|
||||
UINT32 rx_overrun_errs;
|
||||
UINT32 rx_colls_errs;
|
||||
UINT32 rx_runt_errs;
|
||||
UINT32 done_marker;
|
||||
};
|
||||
#pragma pack()
|
||||
|
||||
|
||||
struct Krn_Mem{
|
||||
RxFD rx_ring[RX_BUFFER_COUNT];
|
||||
TxCB tx_ring[TX_BUFFER_COUNT];
|
||||
struct speedo_stats statistics;
|
||||
};
|
||||
#define MEMORY_NEEDED sizeof(struct Krn_Mem)
|
||||
|
||||
/* The parameters for a CmdConfigure operation.
|
||||
There are so many options that it would be difficult to document each bit.
|
||||
We mostly use the default or recommended settings.
|
||||
*/
|
||||
|
||||
/*
|
||||
*--------------------------------------------------------------------------
|
||||
* Configuration CB Parameter Bit Definitions
|
||||
*--------------------------------------------------------------------------
|
||||
*/
|
||||
// - Byte 0 (Default Value = 16h)
|
||||
#define CFIG_BYTE_COUNT 0x16 // 22 Configuration Bytes
|
||||
|
||||
//- Byte 1 (Default Value = 88h)
|
||||
#define CFIG_TXRX_FIFO_LIMIT 0x88
|
||||
|
||||
//- Byte 2 (Default Value = 0)
|
||||
#define CFIG_ADAPTIVE_IFS 0
|
||||
|
||||
//- Byte 3 (Default Value = 0, ALWAYS. This byte is RESERVED)
|
||||
#define CFIG_RESERVED 0
|
||||
|
||||
//- Byte 4 (Default Value = 0. Default implies that Rx DMA cannot be
|
||||
//- preempted).
|
||||
#define CFIG_RXDMA_BYTE_COUNT 0
|
||||
|
||||
//- Byte 5 (Default Value = 80h. Default implies that Tx DMA cannot be
|
||||
//- preempted. However, setting these counters is enabled.)
|
||||
#define CFIG_DMBC_ENABLE 0x80
|
||||
|
||||
//- Byte 6 (Default Value = 33h. Late SCB enabled, No TNO interrupts,
|
||||
//- CNA interrupts and do not save bad frames.)
|
||||
#define CFIG_LATE_SCB 1 // BIT 0
|
||||
#define CFIG_TNO_INTERRUPT 0x4 // BIT 2
|
||||
#define CFIG_CI_INTERRUPT 0x8 // BIT 3
|
||||
#define CFIG_SAVE_BAD_FRAMES 0x80 // BIT_7
|
||||
|
||||
//- Byte 7 (Default Value = 7h. Discard short frames automatically and
|
||||
//- attempt upto 3 retries on transmit.)
|
||||
#define CFIG_DISCARD_SHORTRX 0x00001
|
||||
#define CFIG_URUN_RETRY BIT_1 OR BIT_2
|
||||
|
||||
//- Byte 8 (Default Value = 1. Enable MII mode.)
|
||||
#define CFIG_503_MII BIT_0
|
||||
|
||||
//- Byte 9 (Default Value = 0, ALWAYS)
|
||||
|
||||
//- Byte 10 (Default Value = 2Eh)
|
||||
#define CFIG_NSAI BIT_3
|
||||
#define CFIG_PREAMBLE_LENGTH BIT_5 ;- Bit 5-4 = 1-0
|
||||
#define CFIG_NO_LOOPBACK 0
|
||||
#define CFIG_INTERNAL_LOOPBACK BIT_6
|
||||
#define CFIG_EXT_LOOPBACK BIT_7
|
||||
#define CFIG_EXT_PIN_LOOPBACK BIT_6 OR BIT_7
|
||||
|
||||
//- Byte 11 (Default Value = 0)
|
||||
#define CFIG_LINEAR_PRIORITY 0
|
||||
|
||||
//- Byte 12 (Default Value = 60h)
|
||||
#define CFIG_LPRIORITY_MODE 0
|
||||
#define CFIG_IFS 6 ;- 6 * 16 = 96
|
||||
|
||||
//- Byte 13 (Default Value = 0, ALWAYS)
|
||||
|
||||
//- Byte 14 (Default Value = 0F2h, ALWAYS)
|
||||
|
||||
//- Byte 15 (Default Value = E8h)
|
||||
#define CFIG_PROMISCUOUS_MODE BIT_0
|
||||
#define CFIG_BROADCAST_DISABLE BIT_1
|
||||
#define CFIG_CRS_CDT BIT_7
|
||||
|
||||
//- Byte 16 (Default Value = 0, ALWAYS)
|
||||
|
||||
//- Byte 17 (Default Value = 40h, ALWAYS)
|
||||
|
||||
//- Byte 18 (Default Value = F2h)
|
||||
#define CFIG_STRIPPING BIT_0
|
||||
#define CFIG_PADDING BIT_1
|
||||
#define CFIG_RX_CRC_TRANSFER BIT_2
|
||||
|
||||
//- Byte 19 (Default Value = 80h)
|
||||
#define CFIG_FORCE_FDX BIT_6
|
||||
#define CFIG_FDX_PIN_ENABLE BIT_7
|
||||
|
||||
//- Byte 20 (Default Value = 3Fh)
|
||||
#define CFIG_MULTI_IA BIT_6
|
||||
|
||||
//- Byte 21 (Default Value = 05)
|
||||
#define CFIG_MC_ALL BIT_3
|
||||
|
||||
/*-----------------------------------------------------------------------*/
|
||||
#define D102_REVID 0x0b
|
||||
|
||||
#define HALF_DUPLEX 1
|
||||
#define FULL_DUPLEX 2
|
||||
|
||||
typedef struct s_data_instance {
|
||||
|
||||
UINT16 State; // stopped, started or initialized
|
||||
UINT16 Bus;
|
||||
UINT8 Device;
|
||||
UINT8 Function;
|
||||
UINT16 VendorID;
|
||||
UINT16 DeviceID;
|
||||
UINT16 RevID;
|
||||
UINT16 SubVendorID;
|
||||
UINT16 SubSystemID;
|
||||
|
||||
UINT8 PermNodeAddress[PXE_MAC_LENGTH];
|
||||
UINT8 CurrentNodeAddress[PXE_MAC_LENGTH];
|
||||
UINT8 BroadcastNodeAddress[PXE_MAC_LENGTH];
|
||||
UINT32 Config[MAX_PCI_CONFIG_LEN];
|
||||
UINT32 NVData[MAX_EEPROM_LEN];
|
||||
|
||||
UINT32 ioaddr;
|
||||
UINT32 flash_addr;
|
||||
|
||||
UINT16 LinkSpeed; // actual link speed setting
|
||||
UINT16 LinkSpeedReq; // requested (forced) link speed
|
||||
UINT8 DuplexReq; // requested duplex
|
||||
UINT8 Duplex; // Duplex set
|
||||
UINT8 CableDetect; // 1 to detect and 0 not to detect the cable
|
||||
UINT8 LoopBack;
|
||||
|
||||
UINT16 TxBufCnt;
|
||||
UINT16 TxBufSize;
|
||||
UINT16 RxBufCnt;
|
||||
UINT16 RxBufSize;
|
||||
UINT32 RxTotals;
|
||||
UINT32 TxTotals;
|
||||
|
||||
UINT16 int_mask;
|
||||
UINT16 Int_Status;
|
||||
UINT16 PhyRecord[2]; // primary and secondary PHY record registers from eeprom
|
||||
UINT8 PhyAddress;
|
||||
UINT8 int_num;
|
||||
UINT16 NVData_Len;
|
||||
UINT32 MemoryLength;
|
||||
|
||||
RxFD *rx_ring; // array of rx buffers
|
||||
TxCB *tx_ring; // array of tx buffers
|
||||
struct speedo_stats *statistics;
|
||||
TxCB *FreeTxHeadPtr;
|
||||
TxCB *FreeTxTailPtr;
|
||||
RxFD *RFDTailPtr;
|
||||
|
||||
UINT64 rx_phy_addr; // physical addresses
|
||||
UINT64 tx_phy_addr;
|
||||
UINT64 stat_phy_addr;
|
||||
UINT64 MemoryPtr;
|
||||
UINT64 Mapped_MemoryPtr;
|
||||
|
||||
UINT64 xmit_done[TX_BUFFER_COUNT << 1]; // circular buffer
|
||||
UINT16 xmit_done_head; // index into the xmit_done array
|
||||
UINT16 xmit_done_tail; // where are we filling now (index into xmit_done)
|
||||
UINT16 cur_rx_ind; // current RX Q head index
|
||||
UINT16 FreeCBCount;
|
||||
|
||||
BOOLEAN in_interrupt;
|
||||
BOOLEAN in_transmit;
|
||||
BOOLEAN Receive_Started;
|
||||
UINT8 Rx_Filter;
|
||||
UINT8 VersionFlag; // UNDI30 or UNDI31??
|
||||
UINT8 rsvd[3];
|
||||
|
||||
struct mc{
|
||||
UINT16 reserved [3]; // padding for this structure to make it 8 byte aligned
|
||||
UINT16 list_len;
|
||||
UINT8 mc_list[MAX_MCAST_ADDRESS_CNT][PXE_MAC_LENGTH]; // 8*32 is the size
|
||||
} mcast_list;
|
||||
|
||||
UINT64 Unique_ID;
|
||||
|
||||
EFI_PCI_IO_PROTOCOL *Io_Function;
|
||||
|
||||
VOID (*Delay_30)(UINTN); // call back routine
|
||||
VOID (*Virt2Phys_30)(UINT64 virtual_addr, UINT64 physical_ptr); // call back routine
|
||||
VOID (*Block_30)(UINT32 enable); // call back routine
|
||||
VOID (*Mem_Io_30)(UINT8 read_write, UINT8 len, UINT64 port, UINT64 buf_addr);
|
||||
VOID (*Delay)(UINT64, UINTN); // call back routine
|
||||
VOID (*Virt2Phys)(UINT64 unq_id, UINT64 virtual_addr, UINT64 physical_ptr); // call back routine
|
||||
VOID (*Block)(UINT64 unq_id, UINT32 enable); // call back routine
|
||||
VOID (*Mem_Io)(UINT64 unq_id, UINT8 read_write, UINT8 len, UINT64 port,
|
||||
UINT64 buf_addr);
|
||||
VOID (*Map_Mem)(UINT64 unq_id, UINT64 virtual_addr, UINT32 size,
|
||||
UINT32 Direction, UINT64 mapped_addr);
|
||||
VOID (*UnMap_Mem)(UINT64 unq_id, UINT64 virtual_addr, UINT32 size,
|
||||
UINT32 Direction, UINT64 mapped_addr);
|
||||
VOID (*Sync_Mem)(UINT64 unq_id, UINT64 virtual_addr,
|
||||
UINT32 size, UINT32 Direction, UINT64 mapped_addr);
|
||||
} NIC_DATA_INSTANCE;
|
||||
|
||||
#pragma pack(1)
|
||||
struct MC_CB_STRUCT{
|
||||
UINT16 count;
|
||||
UINT8 m_list[MAX_MCAST_ADDRESS_CNT][ETHER_MAC_ADDR_LEN];
|
||||
};
|
||||
#pragma pack()
|
||||
|
||||
#define FOUR_GIGABYTE (UINT64)0x100000000ULL
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,96 @@
|
|||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
|
||||
<MsaHeader>
|
||||
<ModuleName>Undi</ModuleName>
|
||||
<ModuleType>DXE_RUNTIME_DRIVER</ModuleType>
|
||||
<GuidValue>A1f436EA-A127-4EF8-957C-8048606FF670</GuidValue>
|
||||
<Version>1.0</Version>
|
||||
<Abstract>Component description file for Undi module.</Abstract>
|
||||
<Description>This module provides support for Universal Network Driver Interface</Description>
|
||||
<Copyright>Copyright (c) 2006 - 2007, Intel Corporation</Copyright>
|
||||
<License>All rights reserved. This program and the accompanying materials
|
||||
are licensed and made available under the terms and conditions of the BSD License
|
||||
which accompanies this distribution. The full text of the license may be found at
|
||||
http://opensource.org/licenses/bsd-license.php
|
||||
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>
|
||||
<Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>
|
||||
</MsaHeader>
|
||||
<ModuleDefinitions>
|
||||
<SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>
|
||||
<BinaryModule>false</BinaryModule>
|
||||
<OutputFileBasename>Undi</OutputFileBasename>
|
||||
</ModuleDefinitions>
|
||||
<LibraryClassDefinitions>
|
||||
<LibraryClass Usage="ALWAYS_CONSUMED">
|
||||
<Keyword>UefiDriverEntryPoint</Keyword>
|
||||
</LibraryClass>
|
||||
<LibraryClass Usage="ALWAYS_CONSUMED">
|
||||
<Keyword>UefiDriverModelLib</Keyword>
|
||||
</LibraryClass>
|
||||
<LibraryClass Usage="ALWAYS_CONSUMED">
|
||||
<Keyword>UefiRuntimeLib</Keyword>
|
||||
</LibraryClass>
|
||||
<LibraryClass Usage="ALWAYS_CONSUMED">
|
||||
<Keyword>DebugLib</Keyword>
|
||||
</LibraryClass>
|
||||
<LibraryClass Usage="ALWAYS_CONSUMED">
|
||||
<Keyword>BaseMemoryLib</Keyword>
|
||||
</LibraryClass>
|
||||
<LibraryClass Usage="ALWAYS_CONSUMED">
|
||||
<Keyword>UefiBootServicesTableLib</Keyword>
|
||||
</LibraryClass>
|
||||
</LibraryClassDefinitions>
|
||||
<SourceFiles>
|
||||
<Filename>Init.c</Filename>
|
||||
<Filename>Decode.c</Filename>
|
||||
<Filename>E100b.c</Filename>
|
||||
<Filename>E100b.h</Filename>
|
||||
<Filename>Undi32.h</Filename>
|
||||
</SourceFiles>
|
||||
<PackageDependencies>
|
||||
<Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>
|
||||
</PackageDependencies>
|
||||
<Protocols>
|
||||
<Protocol Usage="TO_START">
|
||||
<ProtocolCName>gEfiDevicePathProtocolGuid</ProtocolCName>
|
||||
</Protocol>
|
||||
<Protocol Usage="TO_START">
|
||||
<ProtocolCName>gEfiPciIoProtocolGuid</ProtocolCName>
|
||||
</Protocol>
|
||||
<Protocol Usage="BY_START">
|
||||
<ProtocolCName>gEfiNetworkInterfaceIdentifierProtocolGuid</ProtocolCName>
|
||||
</Protocol>
|
||||
<Protocol Usage="BY_START">
|
||||
<ProtocolCName>gEfiNetworkInterfaceIdentifierProtocolGuid_31</ProtocolCName>
|
||||
</Protocol>
|
||||
</Protocols>
|
||||
<Events>
|
||||
<CreateEvents>
|
||||
<EventTypes EventGuidCName="gEfiEventVirtualAddressChangeGuid" Usage="ALWAYS_CONSUMED">
|
||||
<EventType>EVENT_GROUP_GUID</EventType>
|
||||
</EventTypes>
|
||||
<EventTypes EventGuidCName="gEfiEventExitBootServicesGuid" Usage="ALWAYS_CONSUMED">
|
||||
<EventType>EVENT_GROUP_GUID</EventType>
|
||||
</EventTypes>
|
||||
</CreateEvents>
|
||||
</Events>
|
||||
<SystemTables>
|
||||
<SystemTableCNames Usage="SOMETIMES_PRODUCED">
|
||||
<SystemTableCName>gEfiNetworkInterfaceIdentifierProtocolGuid_31</SystemTableCName>
|
||||
</SystemTableCNames>
|
||||
</SystemTables>
|
||||
<Externs>
|
||||
<Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>
|
||||
<Specification>EDK_RELEASE_VERSION 0x00020000</Specification>
|
||||
<Extern>
|
||||
<ModuleEntryPoint>InitializeUNDIDriver</ModuleEntryPoint>
|
||||
</Extern>
|
||||
<Extern>
|
||||
<DriverBinding>gUndiDriverBinding</DriverBinding>
|
||||
</Extern>
|
||||
<Extern>
|
||||
<SetVirtualAddressMapCallBack>UndiNotifyVirtual</SetVirtualAddressMapCallBack>
|
||||
</Extern>
|
||||
</Externs>
|
||||
</ModuleSurfaceArea>
|
||||
|
|
@ -0,0 +1,374 @@
|
|||
|
||||
/*++
|
||||
|
||||
Copyright (c) 2006, Intel Corporation.
|
||||
All rights reserved. This program and the accompanying materials
|
||||
are licensed and made available under the terms and conditions of the BSD License
|
||||
which accompanies this distribution. The full text of the license may be found at
|
||||
http://opensource.org/licenses/bsd-license.php
|
||||
|
||||
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||||
|
||||
Module Name:
|
||||
|
||||
undi32.h
|
||||
|
||||
Abstract:
|
||||
|
||||
EFI internal structures for the EFI UNDI driver
|
||||
|
||||
|
||||
|
||||
Revision History
|
||||
|
||||
--*/
|
||||
|
||||
#ifndef _UNDI_32_H_
|
||||
#define _UNDI_32_H_
|
||||
|
||||
#include <PiDxe.h>
|
||||
|
||||
#include <Guid/EventGroup.h>
|
||||
#include <Protocol/PciIo.h>
|
||||
#include <Protocol/NetworkInterfaceIdentifier.h>
|
||||
#include <Protocol/DevicePath.h>
|
||||
|
||||
#include <Library/UefiDriverEntryPoint.h>
|
||||
#include <Library/UefiRuntimeLib.h>
|
||||
#include <Library/DebugLib.h>
|
||||
#include <Library/BaseMemoryLib.h>
|
||||
#include <Library/UefiBootServicesTableLib.h>
|
||||
#include <Library/UefiLib.h>
|
||||
|
||||
#include <IndustryStandard/Pci.h>
|
||||
|
||||
|
||||
#include "E100b.h"
|
||||
|
||||
#define MAX_NIC_INTERFACES 16
|
||||
|
||||
#define EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL_REVISION_31 0x00010001
|
||||
#define PXE_ROMID_MINORVER_31 0x10
|
||||
#define PXE_STATFLAGS_DB_WRITE_TRUNCATED 0x2000
|
||||
|
||||
//
|
||||
// UNDI_CALL_TABLE.state can have the following values
|
||||
//
|
||||
#define DONT_CHECK -1
|
||||
#define ANY_STATE -1
|
||||
#define MUST_BE_STARTED 1
|
||||
#define MUST_BE_INITIALIZED 2
|
||||
|
||||
#define UNDI_DEV_SIGNATURE EFI_SIGNATURE_32('u','n','d','i')
|
||||
#define UNDI_DEV_FROM_THIS(a) CR(a, UNDI32_DEV, NIIProtocol, UNDI_DEV_SIGNATURE)
|
||||
#define UNDI_DEV_FROM_NIC(a) CR(a, UNDI32_DEV, NicInfo, UNDI_DEV_SIGNATURE)
|
||||
|
||||
typedef struct {
|
||||
UINTN Signature;
|
||||
EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL NIIProtocol;
|
||||
EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL NIIProtocol_31;
|
||||
EFI_HANDLE DeviceHandle;
|
||||
EFI_DEVICE_PATH_PROTOCOL *Undi32BaseDevPath;
|
||||
EFI_DEVICE_PATH_PROTOCOL *Undi32DevPath;
|
||||
NIC_DATA_INSTANCE NicInfo;
|
||||
} UNDI32_DEV;
|
||||
|
||||
typedef struct {
|
||||
UINT16 cpbsize;
|
||||
UINT16 dbsize;
|
||||
UINT16 opflags;
|
||||
UINT16 state;
|
||||
VOID (*api_ptr)();
|
||||
} UNDI_CALL_TABLE;
|
||||
|
||||
typedef struct {
|
||||
EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL *InterfacePointer;
|
||||
EFI_DEVICE_PATH_PROTOCOL *DevicePathPointer;
|
||||
} NII_ENTRY;
|
||||
|
||||
typedef struct NII_CONFIG_ENTRY {
|
||||
UINT32 NumEntries;
|
||||
UINT32 Reserved; // padding for alignment
|
||||
struct NII_CONFIG_ENTRY *NextLink;
|
||||
NII_ENTRY NiiEntry[1];
|
||||
} NII_TABLE;
|
||||
|
||||
typedef VOID (*ptr)(VOID);
|
||||
typedef VOID (*bsptr_30)(UINTN);
|
||||
typedef VOID (*virtphys_30)(UINT64, UINT64);
|
||||
typedef VOID (*block_30)(UINT32);
|
||||
typedef VOID (*mem_io_30)(UINT8, UINT8, UINT64, UINT64);
|
||||
|
||||
typedef VOID (*bsptr)(UINT64, UINTN);
|
||||
typedef VOID (*virtphys)(UINT64, UINT64, UINT64);
|
||||
typedef VOID (*block)(UINT64, UINT32);
|
||||
typedef VOID (*mem_io)(UINT64, UINT8, UINT8, UINT64, UINT64);
|
||||
|
||||
typedef VOID (*map_mem)(UINT64, UINT64, UINT32, UINT32, UINT64);
|
||||
typedef VOID (*unmap_mem)(UINT64, UINT64, UINT32, UINT32, UINT64);
|
||||
typedef VOID (*sync_mem)(UINT64, UINT64, UINT32, UINT32, UINT64);
|
||||
|
||||
extern UNDI_CALL_TABLE api_table[];
|
||||
extern PXE_SW_UNDI *pxe; // !pxe structure
|
||||
extern PXE_SW_UNDI *pxe_31; // !pxe structure for 3.1 drivers
|
||||
extern UNDI32_DEV *UNDI32DeviceList[MAX_NIC_INTERFACES];
|
||||
|
||||
//
|
||||
// functions defined in e100b.c
|
||||
//
|
||||
UINT8 InByte (NIC_DATA_INSTANCE *AdapterInfo, UINT32 Port);
|
||||
UINT16 InWord (NIC_DATA_INSTANCE *AdapterInfo, UINT32 Port);
|
||||
UINT32 InLong (NIC_DATA_INSTANCE *AdapterInfo, UINT32 Port);
|
||||
VOID OutByte (NIC_DATA_INSTANCE *AdapterInfo, UINT8 Data, UINT32 Port);
|
||||
VOID OutWord (NIC_DATA_INSTANCE *AdapterInfo, UINT16 Data, UINT32 Port);
|
||||
VOID OutLong (NIC_DATA_INSTANCE *AdapterInfo, UINT32 Data, UINT32 Port);
|
||||
|
||||
UINTN E100bInit (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
UINTN E100bReset (NIC_DATA_INSTANCE *AdapterInfo, INT32 OpFlags);
|
||||
UINTN E100bShutdown (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
UINTN E100bTransmit (NIC_DATA_INSTANCE *AdapterInfo, UINT64 cpb, UINT16 opflags);
|
||||
UINTN E100bReceive (NIC_DATA_INSTANCE *AdapterInfo, UINT64 cpb, UINT64 db);
|
||||
UINTN E100bSetfilter (NIC_DATA_INSTANCE *AdapterInfo, UINT16 New_filter,
|
||||
UINT64 cpb, UINT32 cpbsize);
|
||||
UINTN E100bStatistics(NIC_DATA_INSTANCE *AdapterInfo, UINT64 db, UINT16 dbsize);
|
||||
UINT8 E100bSetupIAAddr (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
UINT8 E100bSetInterruptState (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
|
||||
UINT8 E100bGetEepromAddrLen (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
UINT16 E100bReadEeprom (NIC_DATA_INSTANCE *AdapterInfo, INT32 Location, UINT8 address_len);
|
||||
INT16 E100bReadEepromAndStationAddress (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
|
||||
UINT16 next(UINT16);
|
||||
UINT8 SetupCBlink (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
VOID SetFreeCB (NIC_DATA_INSTANCE *AdapterInfo,TxCB *);
|
||||
TxCB *GetFreeCB (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
UINT16 CheckCBList (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
|
||||
UINT8 SelectiveReset (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
UINT16 InitializeChip (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
UINT8 SetupReceiveQueues (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
VOID Recycle_RFD (NIC_DATA_INSTANCE *AdapterInfo, UINT16);
|
||||
VOID XmitWaitForCompletion (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
INT8 CommandWaitForCompletion (TxCB *cmd_ptr, NIC_DATA_INSTANCE *AdapterInfo);
|
||||
|
||||
BOOLEAN PhyDetect (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
VOID PhyReset (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
VOID
|
||||
MdiWrite (
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo,
|
||||
IN UINT8 RegAddress,
|
||||
IN UINT8 PhyAddress,
|
||||
IN UINT16 DataValue
|
||||
);
|
||||
|
||||
VOID
|
||||
MdiRead(
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo,
|
||||
IN UINT8 RegAddress,
|
||||
IN UINT8 PhyAddress,
|
||||
IN OUT UINT16 *DataValue
|
||||
);
|
||||
|
||||
BOOLEAN SetupPhy (NIC_DATA_INSTANCE *AdapterInfo);
|
||||
VOID FindPhySpeedAndDpx (NIC_DATA_INSTANCE *AdapterInfo, UINT32 PhyId);
|
||||
|
||||
|
||||
|
||||
//
|
||||
// functions defined in init.c
|
||||
//
|
||||
EFI_STATUS
|
||||
InstallConfigTable (
|
||||
IN VOID
|
||||
);
|
||||
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
InitializeUNDIDriver (
|
||||
IN EFI_HANDLE ImageHandle,
|
||||
IN EFI_SYSTEM_TABLE *SystemTable
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_notify_virtual (
|
||||
EFI_EVENT event,
|
||||
VOID *context
|
||||
);
|
||||
|
||||
VOID
|
||||
EFIAPI
|
||||
UndiNotifyExitBs (
|
||||
EFI_EVENT Event,
|
||||
VOID *Context
|
||||
);
|
||||
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
UndiDriverSupported (
|
||||
IN EFI_DRIVER_BINDING_PROTOCOL *This,
|
||||
IN EFI_HANDLE Controller,
|
||||
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
|
||||
);
|
||||
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
UndiDriverStart (
|
||||
IN EFI_DRIVER_BINDING_PROTOCOL *This,
|
||||
IN EFI_HANDLE Controller,
|
||||
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
|
||||
);
|
||||
|
||||
EFI_STATUS
|
||||
EFIAPI
|
||||
UndiDriverStop (
|
||||
IN EFI_DRIVER_BINDING_PROTOCOL *This,
|
||||
IN EFI_HANDLE Controller,
|
||||
IN UINTN NumberOfChildren,
|
||||
IN EFI_HANDLE *ChildHandleBuffer
|
||||
);
|
||||
|
||||
EFI_STATUS
|
||||
AppendMac2DevPath (
|
||||
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevPtr,
|
||||
IN EFI_DEVICE_PATH_PROTOCOL *BaseDevPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
TmpDelay (
|
||||
IN UINT64 UnqId,
|
||||
IN UINTN MicroSeconds
|
||||
);
|
||||
|
||||
VOID
|
||||
TmpMemIo (
|
||||
IN UINT64 UnqId,
|
||||
IN UINT8 ReadWrite,
|
||||
IN UINT8 Len,
|
||||
IN UINT64 Port,
|
||||
IN UINT64 BufAddr
|
||||
);
|
||||
|
||||
//
|
||||
// functions defined in decode.c
|
||||
//
|
||||
VOID
|
||||
UNDI_GetState (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_Start (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_Stop (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_GetInitInfo (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_GetConfigInfo (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_Initialize (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_Reset (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_Shutdown (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_Interrupt (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_RecFilter (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_StnAddr (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_Statistics (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_ip2mac (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_NVData (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_Status (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_FillHeader (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_Transmit (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID
|
||||
UNDI_Receive (
|
||||
IN PXE_CDB *CdbPtr,
|
||||
IN NIC_DATA_INSTANCE *AdapterInfo
|
||||
);
|
||||
|
||||
VOID UNDI_APIEntry_new(UINT64);
|
||||
VOID UNDI_APIEntry_old(UINT64);
|
||||
VOID UNDI_APIEntry_Common(UINT64);
|
||||
|
||||
PXE_IPV4 convert_mcip(PXE_MAC_ADDR *);
|
||||
INT32 validate_mcip (PXE_MAC_ADDR *MCastAddr);
|
||||
|
||||
VOID PxeStructInit (PXE_SW_UNDI *PxePtr, UINTN VersionFlag);
|
||||
VOID PxeUpdate (NIC_DATA_INSTANCE *NicPtr, PXE_SW_UNDI *PxePtr);
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,63 @@
|
|||
#/** @file
|
||||
# Component description file for Undi module.
|
||||
#
|
||||
# This module provides support for Universal Network Driver Interface
|
||||
# Copyright (c) 2006 - 2007, Intel Corporation
|
||||
#
|
||||
# All rights reserved. This program and the accompanying materials
|
||||
# are licensed and made available under the terms and conditions of the BSD License
|
||||
# which accompanies this distribution. The full text of the license may be found at
|
||||
# http://opensource.org/licenses/bsd-license.php
|
||||
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||||
#
|
||||
#
|
||||
#**/
|
||||
|
||||
[Defines]
|
||||
INF_VERSION = 0x00010005
|
||||
BASE_NAME = UndiRuntimeDxe
|
||||
FILE_GUID = A1f436EA-A127-4EF8-957C-8048606FF670
|
||||
MODULE_TYPE = DXE_RUNTIME_DRIVER
|
||||
VERSION_STRING = 1.0
|
||||
EDK_RELEASE_VERSION = 0x00020000
|
||||
EFI_SPECIFICATION_VERSION = 0x00020000
|
||||
|
||||
ENTRY_POINT = InitializeUndi
|
||||
|
||||
#
|
||||
# VALID_ARCHITECTURES = IA32 X64 IPF EBC
|
||||
#
|
||||
|
||||
[Sources.common]
|
||||
Undi32.h
|
||||
E100b.h
|
||||
E100b.c
|
||||
Decode.c
|
||||
Init.c
|
||||
|
||||
|
||||
[Packages]
|
||||
MdePkg/MdePkg.dec
|
||||
|
||||
|
||||
[LibraryClasses]
|
||||
UefiLib
|
||||
UefiBootServicesTableLib
|
||||
BaseMemoryLib
|
||||
DebugLib
|
||||
UefiRuntimeLib
|
||||
UefiDriverEntryPoint
|
||||
|
||||
|
||||
[Guids]
|
||||
gEfiEventExitBootServicesGuid
|
||||
gEfiEventVirtualAddressChangeGuid
|
||||
|
||||
|
||||
[Protocols]
|
||||
gEfiNetworkInterfaceIdentifierProtocolGuid_31
|
||||
gEfiNetworkInterfaceIdentifierProtocolGuid
|
||||
gEfiPciIoProtocolGuid
|
||||
gEfiDevicePathProtocolGuid
|
||||
|
||||
|
|
@ -55,9 +55,12 @@
|
|||
[LibraryClasses.IPF]
|
||||
IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
|
||||
|
||||
[LibraryClasses.EBC]
|
||||
[LibraryClasses.EBC.DXE_DRIVER]
|
||||
IoLib|IntelFrameworkPkg/Library/DxeIoLibCpuIo/DxeIoLibCpuIo.inf
|
||||
|
||||
[LibraryClasses.EBC.PEIM]
|
||||
IoLib|MdePkg/Library/PeiIoLibCpuIo/PeiIoLibCpuIo.inf
|
||||
|
||||
[LibraryClasses.common.PEI_CORE]
|
||||
PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf
|
||||
HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
|
||||
|
|
@ -420,6 +423,7 @@
|
|||
MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
|
||||
MdeModulePkg/Universal/DebugSupportDxe/DebugSupportDxe.inf
|
||||
MdeModulePkg/Universal/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
|
||||
MdeModulePkg/Bus/Pci/UndiRuntimeDxe/UndiRuntimeDxe.inf
|
||||
|
||||
[Components.X64]
|
||||
MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
|
||||
|
|
@ -429,6 +433,7 @@
|
|||
MdeModulePkg/Universal/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
|
||||
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
|
||||
MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
|
||||
MdeModulePkg/Bus/Pci/UndiRuntimeDxe/UndiRuntimeDxe.inf
|
||||
|
||||
[Components.IPF]
|
||||
MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
|
||||
|
|
@ -437,4 +442,5 @@
|
|||
[Components.EBC]
|
||||
#BugBug: Need DXE I/O library instance for EBC.
|
||||
#MdeModulePkg/Universal/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
|
||||
MdeModulePkg/Bus/Pci/UndiRuntimeDxe/UndiRuntimeDxe.inf
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue