MdeModulePkg: Add definitions for NVM Express Passthru PPI

https://bugzilla.tianocore.org/show_bug.cgi?id=1879
This commit will add the definitions of Nvm Express PassThru PPI.
This PPI will provide services that allow NVM commands to be sent
to NVM Express devices during PEI phase.

More specifically, the PPI will provide services to:

* Sends an NVM Express Command Packet to an NVM Express controller
  or namespace (by service 'PassThru');
* Get the list of the attached namespaces on a controller
  (by services 'GetNextNameSpace');
* Get the identification information (DevicePath) of the underlying
  NVM Express host controller (by service 'GetDevicePath').

Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
This commit is contained in:
Chu, Maggie 2019-06-17 10:10:43 +08:00 committed by Hao A Wu
parent 719a684d7d
commit 4128d8a8cb
2 changed files with 159 additions and 0 deletions

View File

@ -0,0 +1,156 @@
/** @file
Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _EDKII_NVME_PASS_THRU_PPI_H_
#define _EDKII_NVME_PASS_THRU_PPI_H_
#include <Protocol/DevicePath.h>
#include <Protocol/NvmExpressPassthru.h>
///
/// Global ID for the EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI.
///
#define EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_GUID \
{ \
0x6af31b2c, 0x3be, 0x46c1, { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7, 0x4c } \
}
//
// Forward declaration for the EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI.
//
typedef struct _EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI;
//
// Revision The revision to which the Nvme Pass Thru PPI interface adheres.
// All future revisions must be backwards compatible.
// If a future version is not back wards compatible it is not the same GUID.
//
#define EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_REVISION 0x00010000
/**
Gets the device path information of the underlying NVM Express host controller.
@param[in] This The PPI instance pointer.
@param[out] DevicePathLength The length of the device path in bytes specified
by DevicePath.
@param[out] DevicePath The device path of the underlying NVM Express
host controller.
This field re-uses EFI Device Path Protocol as
defined by Section 10.2 EFI Device Path Protocol
of UEFI 2.7 Specification.
@retval EFI_SUCCESS The operation succeeds.
@retval EFI_INVALID_PARAMETER DevicePathLength or DevicePath is NULL.
@retval EFI_OUT_OF_RESOURCES The operation fails due to lack of resources.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_NVME_PASS_THRU_GET_DEVICE_PATH) (
IN EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI *This,
OUT UINTN *DevicePathLength,
OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
/**
Used to retrieve the next namespace ID for this NVM Express controller.
If on input the value pointed to by NamespaceId is 0xFFFFFFFF, then the first
valid namespace ID defined on the NVM Express controller is returned in the
location pointed to by NamespaceId and a status of EFI_SUCCESS is returned.
If on input the value pointed to by NamespaceId is an invalid namespace ID
other than 0xFFFFFFFF, then EFI_INVALID_PARAMETER is returned.
If on input the value pointed to by NamespaceId is a valid namespace ID, then
the next valid namespace ID on the NVM Express controller is returned in the
location pointed to by NamespaceId, and EFI_SUCCESS is returned.
If the value pointed to by NamespaceId is the namespace ID of the last
namespace on the NVM Express controller, then EFI_NOT_FOUND is returned.
@param[in] This The PPI instance pointer.
@param[in,out] NamespaceId On input, a pointer to a legal NamespaceId
for an NVM Express namespace present on the
NVM Express controller. On output, a pointer
to the next NamespaceId of an NVM Express
namespace on an NVM Express controller. An
input value of 0xFFFFFFFF retrieves the
first NamespaceId for an NVM Express
namespace present on an NVM Express
controller.
@retval EFI_SUCCESS The Namespace ID of the next Namespace was
returned.
@retval EFI_NOT_FOUND There are no more namespaces defined on this
controller.
@retval EFI_INVALID_PARAMETER NamespaceId is an invalid value other than
0xFFFFFFFF.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_NVME_PASS_THRU_GET_NEXT_NAMESPACE)(
IN EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI *This,
IN OUT UINT32 *NamespaceId
);
/**
Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function only
supports blocking execution of the command.
@param[in] This The PPI instance pointer.
@param[in] NamespaceId Is a 32 bit Namespace ID to which the Nvm Express command packet will
be sent.
A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in
the namespace ID specifies that the command packet should be sent to all
valid namespaces.
@param[in,out] Packet A pointer to the EDKII PEI NVM Express PassThru Command Packet to send
to the NVMe namespace specified by NamespaceId.
@retval EFI_SUCCESS The EDKII PEI NVM Express Command Packet was sent by the host.
TransferLength bytes were transferred to, or from DataBuffer.
@retval EFI_NOT_READY The EDKII PEI NVM Express Command Packet could not be sent because
the controller is not ready. The caller may retry again later.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send the EDKII PEI NVM
Express Command Packet.
@retval EFI_INVALID_PARAMETER Namespace, or the contents of EDKII_PEI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET
are invalid.
The EDKII PEI NVM Express Command Packet was not sent, so no
additional status information is available.
@retval EFI_UNSUPPORTED The command described by the EDKII PEI NVM Express Command Packet
is not supported by the host adapter.
The EDKII PEI NVM Express Command Packet was not sent, so no
additional status information is available.
@retval EFI_TIMEOUT A timeout occurred while waiting for the EDKII PEI NVM Express Command
Packet to execute.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_NVME_PASS_THRU_PASSTHRU) (
IN EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI *This,
IN UINT32 NamespaceId,
IN OUT EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
);
//
// This PPI contains a set of services to send commands
// to a mass storage device.
//
struct _EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI {
UINT64 Revision;
EFI_NVM_EXPRESS_PASS_THRU_MODE *Mode;
EDKII_PEI_NVME_PASS_THRU_GET_DEVICE_PATH GetDevicePath;
EDKII_PEI_NVME_PASS_THRU_GET_NEXT_NAMESPACE GetNextNameSpace;
EDKII_PEI_NVME_PASS_THRU_PASSTHRU PassThru;
};
extern EFI_GUID gEdkiiPeiNvmExpressPassThruPpiGuid;
#endif

View File

@ -469,6 +469,9 @@
## Include/Ppi/Debug.h
gEdkiiDebugPpiGuid = { 0x999e699c, 0xb013, 0x475e, { 0xb1, 0x7b, 0xf3, 0xa8, 0xae, 0x5c, 0x48, 0x75 } }
## Include/Ppi/NvmExpressPassThru.h
gEdkiiPeiNvmExpressPassThruPpiGuid = { 0x6af31b2c, 0x3be, 0x46c1, { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7, 0x4c } }
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h