EmbeddedPkg/Lan9118Dxe: Handle EFI_STATUS from PhySoftReset() & SoftReset()

- Make the function PhySoftReset() return EFI_STATUS
- EFI_STATUS was treated as a signed integer by the caller which is not correct.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>



git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15630 6f19259b-4bc3-4df7-8a09-765794883524

EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.c

@@ -275,7 +275,8 @@ SnpInitialize (
   }
 
   // Initiate a PHY reset
-  if (PhySoftReset (PHY_RESET_PMT | PHY_RESET_CHECK_LINK, Snp) < 0) {
+  Status = PhySoftReset (PHY_RESET_PMT | PHY_RESET_CHECK_LINK, Snp);
+  if (EFI_ERROR (Status)) {
     Snp->Mode->State = EfiSimpleNetworkStopped;
     DEBUG ((EFI_D_WARN, "Warning: Link not ready after TimeOut. Check ethernet cable\n"));
     return EFI_NOT_STARTED;
@@ -375,9 +376,10 @@ SnpReset (
   IN        BOOLEAN Verification
   )
 {
-  UINT32 PmConf;
-  UINT32 HwConf;
-  UINT32 ResetFlags;
+  UINT32     PmConf;
+  UINT32     HwConf;
+  UINT32     ResetFlags;
+  EFI_STATUS Status;
 
   PmConf = 0;
   HwConf = 0;
@@ -398,7 +400,8 @@ SnpReset (
   }
 
   // Initiate a PHY reset
-  if (PhySoftReset (PHY_RESET_PMT | PHY_RESET_CHECK_LINK, Snp) < 0) {
+  Status = PhySoftReset (PHY_RESET_PMT | PHY_RESET_CHECK_LINK, Snp);
+  if (EFI_ERROR (Status)) {
     Snp->Mode->State = EfiSimpleNetworkStopped;
     return EFI_NOT_STARTED;
   }
@@ -410,7 +413,8 @@ SnpReset (
     ResetFlags |= SOFT_RESET_SELF_TEST;
   }
 
-  if (SoftReset (ResetFlags, Snp) < 0) {
+  Status = SoftReset (ResetFlags, Snp);
+  if (EFI_ERROR (Status)) {
     DEBUG ((EFI_D_WARN, "Warning: Soft Reset Failed: Hardware Error\n"));
     return EFI_DEVICE_ERROR;
   }
@@ -457,6 +461,8 @@ SnpShutdown (
   IN        EFI_SIMPLE_NETWORK_PROTOCOL* Snp
   )
 {
+  EFI_STATUS Status;
+
   // Check Snp Instance
   if (Snp == NULL) {
     return EFI_INVALID_PARAMETER;
@@ -472,12 +478,16 @@ SnpShutdown (
   }
 
   // Initiate a PHY reset
-  PhySoftReset (PHY_RESET_PMT, Snp);
+  Status = PhySoftReset (PHY_RESET_PMT, Snp);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
 
   // Initiate a software reset
-  if (SoftReset (0, Snp) < 0) {
+  Status = SoftReset (0, Snp);
+  if (EFI_ERROR (Status)) {
     DEBUG ((EFI_D_WARN, "Warning: Soft Reset Failed: Hardware Error\n"));
-    return EFI_DEVICE_ERROR;
+    return Status;
   }
 
   return EFI_SUCCESS;
@@ -941,7 +951,8 @@ SnpGetStatus (
     DEBUG ((EFI_D_ERROR, "LAN9118: Transmitter error. Restarting..."));
 
     // Initiate a software reset
-    if (SoftReset (0, Snp) < 0) {
+    Status = SoftReset (0, Snp);
+    if (EFI_ERROR (Status)) {
       DEBUG ((EFI_D_ERROR, "\n\tSoft Reset Failed: Hardware Error\n"));
       return EFI_DEVICE_ERROR;
     }
@@ -1160,18 +1171,19 @@ SnpReceive (
       OUT   UINT16 *Protocol              OPTIONAL
   )
 {
-  LAN9118_DRIVER *LanDriver;
-  UINT32 RxFifoStatus;
-  UINT32 NumPackets;
-  UINT32 RxCfgValue;
-  UINT32 PLength; // Packet length
-  UINT32 ReadLimit;
-  UINT32 Count;
-  UINT32 Padding;
-  UINT32 *RawData;
+  LAN9118_DRIVER  *LanDriver;
+  UINT32          RxFifoStatus;
+  UINT32          NumPackets;
+  UINT32          RxCfgValue;
+  UINT32          PLength; // Packet length
+  UINT32          ReadLimit;
+  UINT32          Count;
+  UINT32          Padding;
+  UINT32          *RawData;
   EFI_MAC_ADDRESS Dst;
   EFI_MAC_ADDRESS Src;
-  UINTN  DroppedFrames;
+  UINTN           DroppedFrames;
+  EFI_STATUS      Status;
 
   LanDriver = INSTANCE_FROM_SNP_THIS (Snp);
 
@@ -1301,7 +1313,8 @@ SnpReceive (
     DEBUG ((EFI_D_WARN, "Warning: Receiver Error. Restarting...\n"));
 
     // Initiate a software reset
-    if (SoftReset (0, Snp) < 0) {
+    Status = SoftReset (0, Snp);
+    if (EFI_ERROR (Status)) {
       DEBUG ((EFI_D_ERROR, "Error: Soft Reset Failed: Hardware Error.\n"));
       return EFI_DEVICE_ERROR;
     }

EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.c

@@ -485,7 +485,7 @@ SoftReset (
 
 
 // Perform PHY software reset
-INT32
+EFI_STATUS
 PhySoftReset (
   UINT32 Flags,
   EFI_SIMPLE_NETWORK_PROTOCOL *Snp
@@ -524,7 +524,7 @@ PhySoftReset (
 
     // Timed out
     if (LinkTo <= 0) {
-      return -1;
+      return EFI_TIMEOUT;
     }
   }
 
@@ -535,7 +535,7 @@ PhySoftReset (
     MmioWrite32 (LAN9118_INT_STS, 0xFFFFFFFF);
   }
 
-  return 0;
+  return EFI_SUCCESS;
 }
 
 

EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.h

@@ -119,7 +119,7 @@ SoftReset (
 #define PHY_SOFT_RESET_CLEAR_INT                        BIT3
 
 // Perform PHY software reset
-INT32
+EFI_STATUS
 PhySoftReset (
   UINT32 Flags,
   EFI_SIMPLE_NETWORK_PROTOCOL *Snp