Fix OS X build issues. Wrong slash direction in include path and unused variable warnning.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10498 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
andrewfish 2010-05-18 01:35:15 +00:00
parent 9203284167
commit 4cb67745fd
2 changed files with 73 additions and 50 deletions

View File

@ -14,7 +14,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#ifndef __ARM_EB_H__
#define __ARM_EB_H__
#include <ArmEb\ArmEbUart.h>
#include <ArmEb\ArmEbTimer.h>
#include <ArmEb/ArmEbUart.h>
#include <ArmEb/ArmEbTimer.h>
#endif

View File

@ -76,6 +76,7 @@ TimerInterruptHandler (
OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
// clear the periodic interrupt
MmioWrite32 (EB_SP804_TIMER0_BASE + SP804_TIMER_INT_CLR_REG, 0);
// signal end of interrupt early to help avoid losing subsequent ticks from long duration handlers
@ -175,30 +176,48 @@ TimerDriverSetTimerPeriod (
EFI_STATUS Status;
UINT64 TimerTicks;
// always disable the timer
MmioAnd32 (EB_SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, ~SP804_TIMER_CTRL_ENABLE);
if (TimerPeriod == 0) {
// leave timer disabled from above, and...
// disable timer 0/1 interrupt for a TimerPeriod of 0
Status = gInterrupt->DisableInterruptSource (gInterrupt, gVector);
} else {
// Convert TimerPeriod into 1MHz clock counts (us units = 100ns units / 10)
TimerTicks = DivU64x32 (TimerPeriod, 10);
// if it's larger than 32-bits, pin to highest value
if (TimerTicks > 0xffffffff) {
TimerTicks = 0xffffffff;
}
// Program the SP804 timer with the new count value
MmioWrite32 (EB_SP804_TIMER0_BASE + SP804_TIMER_LOAD_REG, TimerTicks);
// enable the timer
MmioOr32 (EB_SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);
// enable timer 0/1 interrupts
Status = gInterrupt->EnableInterruptSource (gInterrupt, gVector);
}
@ -330,13 +349,15 @@ TimerInitialize (
{
EFI_HANDLE Handle = NULL;
EFI_STATUS Status;
UINT32 TimerBaseAddress;
// configure free running timer (TIMER1) for 1MHz operation
// AND disable clock, OR configure 1MHz clock
MmioAndThenOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER1_EN, SP810_SYS_CTRL_TIMER1_TIMCLK);
// Renable timer
MmioOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_EN);
@ -350,6 +371,7 @@ TimerInitialize (
// record free running tick value (should be close to 0xffffffff)
mLastTickCount = MmioRead32 (EB_SP804_TIMER1_BASE + SP804_TIMER_CURRENT_REG);
// Disable the timer
Status = TimerDriverSetTimerPeriod (&gTimer, 0);
ASSERT_EFI_ERROR (Status);
@ -363,13 +385,14 @@ TimerInitialize (
// configure periodic timer (TIMER0) for 1MHz operation
MmioAndThenOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER0_EN, SP810_SYS_CTRL_TIMER0_TIMCLK);
// Renable timer
MmioOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_EN);
// configure timer 0 for periodic operation, 32 bits, no prescaler, and interrupt enabled
MmioWrite32 (EB_SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_PERIODIC | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1 | SP804_TIMER_CTRL_INT_ENABLE);
// Set up default timer
Status = TimerDriverSetTimerPeriod (&gTimer, FixedPcdGet32(PcdTimerPeriod)); // TIMER_DEFAULT_PERIOD
ASSERT_EFI_ERROR (Status);