diff --git a/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.c b/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.c
index bef34c2e9c..8af23df394 100644
--- a/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.c
+++ b/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.c
@@ -307,8 +307,6 @@ SnpInitialize (
 
   // Write the current configuration to the register
   Lan9118MmioWrite32 (LAN9118_PMT_CTRL, PmConf);
-  gBS->Stall (LAN9118_STALL);
-  gBS->Stall (LAN9118_STALL);
 
   // Configure GPIO and HW
   Status = ConfigureHardware (HW_CONF_USE_LEDS, Snp);
@@ -431,7 +429,6 @@ SnpReset (
 
   // Write the current configuration to the register
   Lan9118MmioWrite32 (LAN9118_PMT_CTRL, PmConf);
-  gBS->Stall (LAN9118_STALL);
 
   // Reactivate the LEDs
   Status = ConfigureHardware (HW_CONF_USE_LEDS, Snp);
@@ -446,7 +443,6 @@ SnpReset (
     HwConf |= HW_CFG_TX_FIFO_SIZE(gTxBuffer);    // assign size chosen in SnpInitialize
 
     Lan9118MmioWrite32 (LAN9118_HW_CFG, HwConf);        // Write the conf
-    gBS->Stall (LAN9118_STALL);
   }
 
   // Enable the receiver and transmitter and clear their contents
@@ -701,7 +697,6 @@ SnpReceiveFilters (
   // Write the options to the MAC_CSR
   //
   IndirectMACWrite32 (INDIRECT_MAC_INDEX_CR, MacCSRValue);
-  gBS->Stall (LAN9118_STALL);
 
   //
   // If we have to retrieve something, start packet reception.
diff --git a/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.c b/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.c
index 61f11b6e27..50c004d728 100644
--- a/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.c
+++ b/EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118DxeUtil.c
@@ -284,7 +284,6 @@ IndirectEEPROMRead32 (
 
   // Write to Eeprom command register
   Lan9118MmioWrite32 (LAN9118_E2P_CMD, EepromCmd);
-  gBS->Stall (LAN9118_STALL);
 
   // Wait until operation has completed
   while (Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
@@ -332,7 +331,6 @@ IndirectEEPROMWrite32 (
 
   // Write to Eeprom command register
   Lan9118MmioWrite32 (LAN9118_E2P_CMD, EepromCmd);
-  gBS->Stall (LAN9118_STALL);
 
   // Wait until operation has completed
   while (Lan9118MmioRead32 (LAN9118_E2P_CMD) & E2P_EPC_BUSY);
@@ -410,7 +408,6 @@ Lan9118Initialize (
   if (((Lan9118MmioRead32 (LAN9118_PMT_CTRL) & MPTCTRL_PM_MODE_MASK) >> 12) != 0) {
     DEBUG ((DEBUG_NET, "Waking from reduced power state.\n"));
     Lan9118MmioWrite32 (LAN9118_BYTE_TEST, 0xFFFFFFFF);
-    gBS->Stall (LAN9118_STALL);
   }
 
   // Check that device is active
@@ -495,7 +492,6 @@ SoftReset (
 
   // Write the configuration
   Lan9118MmioWrite32 (LAN9118_HW_CFG, HwConf);
-  gBS->Stall (LAN9118_STALL);
 
   // Wait for reset to complete
   while (Lan9118MmioRead32 (LAN9118_HW_CFG) & HWCFG_SRST) {
@@ -590,7 +586,6 @@ ConfigureHardware (
 
     // Write the configuration
     Lan9118MmioWrite32 (LAN9118_GPIO_CFG, GpioConf);
-    gBS->Stall (LAN9118_STALL);
   }
 
   return EFI_SUCCESS;
@@ -719,7 +714,6 @@ StopTx (
     TxCfg = Lan9118MmioRead32 (LAN9118_TX_CFG);
     TxCfg |= TXCFG_TXS_DUMP | TXCFG_TXD_DUMP;
     Lan9118MmioWrite32 (LAN9118_TX_CFG, TxCfg);
-    gBS->Stall (LAN9118_STALL);
   }
 
   // Check if already stopped
@@ -738,7 +732,6 @@ StopTx (
     if (TxCfg & TXCFG_TX_ON) {
       TxCfg |= TXCFG_STOP_TX;
       Lan9118MmioWrite32 (LAN9118_TX_CFG, TxCfg);
-      gBS->Stall (LAN9118_STALL);
 
       // Wait for Tx to finish transmitting
       while (Lan9118MmioRead32 (LAN9118_TX_CFG) & TXCFG_STOP_TX);
@@ -773,7 +766,6 @@ StopRx (
     RxCfg = Lan9118MmioRead32 (LAN9118_RX_CFG);
     RxCfg |= RXCFG_RX_DUMP;
     Lan9118MmioWrite32 (LAN9118_RX_CFG, RxCfg);
-    gBS->Stall (LAN9118_STALL);
 
     while (Lan9118MmioRead32 (LAN9118_RX_CFG) & RXCFG_RX_DUMP);
   }
@@ -799,28 +791,23 @@ StartTx (
     TxCfg = Lan9118MmioRead32 (LAN9118_TX_CFG);
     TxCfg |= TXCFG_TXS_DUMP | TXCFG_TXD_DUMP;
     Lan9118MmioWrite32 (LAN9118_TX_CFG, TxCfg);
-    gBS->Stall (LAN9118_STALL);
   }
 
   // Check if tx was started from MAC and enable if not
   if (Flags & START_TX_MAC) {
     MacCsr = IndirectMACRead32 (INDIRECT_MAC_INDEX_CR);
-    gBS->Stall (LAN9118_STALL);
     if ((MacCsr & MACCR_TX_EN) == 0) {
       MacCsr |= MACCR_TX_EN;
       IndirectMACWrite32 (INDIRECT_MAC_INDEX_CR, MacCsr);
-      gBS->Stall (LAN9118_STALL);
     }
   }
 
   // Check if tx was started from TX_CFG and enable if not
   if (Flags & START_TX_CFG) {
     TxCfg = Lan9118MmioRead32 (LAN9118_TX_CFG);
-    gBS->Stall (LAN9118_STALL);
     if ((TxCfg & TXCFG_TX_ON) == 0) {
       TxCfg |= TXCFG_TX_ON;
       Lan9118MmioWrite32 (LAN9118_TX_CFG, TxCfg);
-      gBS->Stall (LAN9118_STALL);
     }
   }
 
@@ -850,14 +837,12 @@ StartRx (
       RxCfg = Lan9118MmioRead32 (LAN9118_RX_CFG);
       RxCfg |= RXCFG_RX_DUMP;
       Lan9118MmioWrite32 (LAN9118_RX_CFG, RxCfg);
-      gBS->Stall (LAN9118_STALL);
 
       while (Lan9118MmioRead32 (LAN9118_RX_CFG) & RXCFG_RX_DUMP);
     }
 
     MacCsr |= MACCR_RX_EN;
     IndirectMACWrite32 (INDIRECT_MAC_INDEX_CR, MacCsr);
-    gBS->Stall (LAN9118_STALL);
   }
 
   return EFI_SUCCESS;
@@ -1047,7 +1032,6 @@ ChangeFifoAllocation (
   HwConf &= ~(0xF0000);
   HwConf |= ((TxFifoOption & 0xF) << 16);
   Lan9118MmioWrite32 (LAN9118_HW_CFG, HwConf);
-  gBS->Stall (LAN9118_STALL);
 
   return EFI_SUCCESS;
 }