UefiCpuPkg/CpuDxe: Add StartApsStackless routine

This routine starts the APs and directs them to run the specified
code.

The specified code is entered without a stack being available.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16349 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
Jordan Justen 2014-11-13 18:25:29 +00:00 committed by jljusten
parent a1e8986d97
commit 533263ee5a
4 changed files with 332 additions and 0 deletions

View File

@ -0,0 +1,304 @@
/** @file
CPU DXE AP Startup
Copyright (c) 2008 - 2012, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "CpuDxe.h"
#include "CpuGdt.h"
#include "CpuMp.h"
#pragma pack(1)
typedef struct {
UINT8 JmpToCli[2];
UINT16 GdtLimit;
UINT32 GdtBase;
UINT8 Cli;
UINT8 MovAxRealSegment; UINT16 RealSegment;
UINT8 MovDsAx[2];
UINT8 MovBxGdtr[3];
UINT8 LoadGdt[5];
UINT8 MovEaxCr0[2];
UINT32 MovEaxCr0Value;
UINT8 MovCr0Eax[3];
UINT8 FarJmp32Flat[2]; UINT32 FlatJmpOffset; UINT16 FlatJmpSelector;
//
// Now in IA32
//
UINT8 MovEaxCr4;
UINT32 MovEaxCr4Value;
UINT8 MovCr4Eax[3];
UINT8 MoveDataSelectorIntoAx[2]; UINT16 FlatDataSelector;
UINT8 MoveFlatDataSelectorFromAxToDs[2];
UINT8 MoveFlatDataSelectorFromAxToEs[2];
UINT8 MoveFlatDataSelectorFromAxToFs[2];
UINT8 MoveFlatDataSelectorFromAxToGs[2];
UINT8 MoveFlatDataSelectorFromAxToSs[2];
#if defined (MDE_CPU_X64)
//
// Transition to X64
//
UINT8 MovEaxCr3;
UINT32 Cr3Value;
UINT8 MovCr3Eax[3];
UINT8 MoveCr4ToEax[3];
UINT8 SetCr4Bit5[4];
UINT8 MoveEaxToCr4[3];
UINT8 MoveLongModeEnableMsrToEcx[5];
UINT8 ReadLmeMsr[2];
UINT8 SetLongModeEnableBit[4];
UINT8 WriteLmeMsr[2];
UINT8 MoveCr0ToEax[3];
UINT8 SetCr0PagingBit[4];
UINT8 MoveEaxToCr0[3];
//UINT8 DeadLoop[2];
UINT8 FarJmp32LongMode; UINT32 LongJmpOffset; UINT16 LongJmpSelector;
#endif // defined (MDE_CPU_X64)
#if defined (MDE_CPU_X64)
UINT8 MovEaxOrRaxCpuDxeEntry[2]; UINTN CpuDxeEntryValue;
#else
UINT8 MovEaxOrRaxCpuDxeEntry; UINTN CpuDxeEntryValue;
#endif
UINT8 JmpToCpuDxeEntry[2];
} STARTUP_CODE;
#pragma pack()
/**
This .asm code used for translating processor from 16 bit real mode into
64 bit long mode. which help to create the mStartupCodeTemplate value.
To assemble:
* nasm -o ApStartup ApStartup.asm
Then disassemble:
* ndisasm -b 16 ApStartup
* ndisasm -b 16 -e 6 ApStartup
* ndisasm -b 32 -e 32 ApStartup (This -e offset may need adjustment)
* ndisasm -b 64 -e 0x83 ApStartup (This -e offset may need adjustment)
%define DEFAULT_CR0 0x00000023
%define DEFAULT_CR4 0x640
BITS 16
jmp short TransitionFromReal16To32BitFlat
ALIGN 2
Gdtr:
dw 0x5a5a
dd 0x5a5a5a5a
;
; Modified: EAX, EBX
;
TransitionFromReal16To32BitFlat:
cli
mov ax, 0x5a5a
mov ds, ax
mov bx, Gdtr
o32 lgdt [ds:bx]
mov eax, cr4
btc eax, 5
mov cr4, eax
mov eax, DEFAULT_CR0
mov cr0, eax
jmp 0x5a5a:dword jumpTo32BitAndLandHere
BITS 32
jumpTo32BitAndLandHere:
mov eax, DEFAULT_CR4
mov cr4, eax
mov ax, 0x5a5a
mov ds, ax
mov es, ax
mov fs, ax
mov gs, ax
mov ss, ax
;
; Jump to CpuDxe for IA32
;
mov eax, 0x5a5a5a5a
or eax, eax
jz Transition32FlatTo64Flat
jmp eax
;
; Transition to X64
;
Transition32FlatTo64Flat:
mov eax, 0x5a5a5a5a
mov cr3, eax
mov eax, cr4
bts eax, 5 ; enable PAE
mov cr4, eax
mov ecx, 0xc0000080
rdmsr
bts eax, 8 ; set LME
wrmsr
mov eax, cr0
bts eax, 31 ; set PG
mov cr0, eax ; enable paging
;
; Jump to CpuDxe for X64
;
jmp 0x5a5a:jumpTo64BitAndLandHere
BITS 64
jumpTo64BitAndLandHere:
mov rax, 0xcdcdcdcdcdcdcdcd
jmp rax
**/
STARTUP_CODE mStartupCodeTemplate = {
{ 0xeb, 0x06 }, // Jump to cli
0, // GDT Limit
0, // GDT Base
0xfa, // cli (Clear Interrupts)
0xb8, 0x0000, // mov ax, RealSegment
{ 0x8e, 0xd8 }, // mov ds, ax
{ 0xBB, 0x02, 0x00 }, // mov bx, Gdtr
{ 0x3e, 0x66, 0x0f, 0x01, 0x17 }, // lgdt [ds:bx]
{ 0x66, 0xB8 }, 0x00000023, // mov eax, cr0 value
{ 0x0F, 0x22, 0xC0 }, // mov cr0, eax
{ 0x66, 0xEA }, // far jmp to 32-bit flat
OFFSET_OF(STARTUP_CODE, MovEaxCr4),
LINEAR_CODE_SEL,
0xB8, 0x00000640, // mov eax, cr4 value
{ 0x0F, 0x22, 0xe0 }, // mov cr4, eax
{ 0x66, 0xb8 }, CPU_DATA_SEL, // mov ax, FlatDataSelector
{ 0x8e, 0xd8 }, // mov ds, ax
{ 0x8e, 0xc0 }, // mov es, ax
{ 0x8e, 0xe0 }, // mov fs, ax
{ 0x8e, 0xe8 }, // mov gs, ax
{ 0x8e, 0xd0 }, // mov ss, ax
#if defined (MDE_CPU_X64)
0xB8, 0x00000000, // mov eax, cr3 value
{ 0x0F, 0x22, 0xd8 }, // mov cr3, eax
{ 0x0F, 0x20, 0xE0 }, // mov eax, cr4
{ 0x0F, 0xBA, 0xE8, 0x05 }, // bts eax, 5
{ 0x0F, 0x22, 0xE0 }, // mov cr4, eax
{ 0xB9, 0x80, 0x00, 0x00, 0xC0 }, // mov ecx, 0xc0000080
{ 0x0F, 0x32 }, // rdmsr
{ 0x0F, 0xBA, 0xE8, 0x08 }, // bts eax, 8
{ 0x0F, 0x30 }, // wrmsr
{ 0x0F, 0x20, 0xC0 }, // mov eax, cr0
{ 0x0F, 0xBA, 0xE8, 0x1F }, // bts eax, 31
{ 0x0F, 0x22, 0xC0 }, // mov cr0, eax
0xEA, // FarJmp32LongMode
OFFSET_OF(STARTUP_CODE, MovEaxOrRaxCpuDxeEntry),
LINEAR_CODE64_SEL,
#endif // defined (MDE_CPU_X64)
//0xeb, 0xfe, // jmp $
#if defined (MDE_CPU_X64)
{ 0x48, 0xb8 }, 0x0, // mov rax, X64 CpuDxe MP Entry Point
#else
0xB8, 0x0, // mov eax, IA32 CpuDxe MP Entry Point
#endif
{ 0xff, 0xe0 }, // jmp to eax/rax (CpuDxe MP Entry Point)
};
/**
Starts the Application Processors and directs them to jump to the
specified routine.
The processor jumps to this code in flat mode, but the processor's
stack is not initialized.
@param ApEntryPoint Pointer to the Entry Point routine
@retval EFI_SUCCESS The APs were started
@retval EFI_OUT_OF_RESOURCES Cannot allocate memory to start APs
**/
EFI_STATUS
StartApsStackless (
IN STACKLESS_AP_ENTRY_POINT ApEntryPoint
)
{
EFI_STATUS Status;
volatile STARTUP_CODE *StartupCode;
IA32_DESCRIPTOR Gdtr;
EFI_PHYSICAL_ADDRESS StartAddress;
StartAddress = BASE_1MB;
Status = gBS->AllocatePages (
AllocateMaxAddress,
EfiACPIMemoryNVS,
EFI_SIZE_TO_PAGES (sizeof (*StartupCode)),
&StartAddress
);
if (EFI_ERROR (Status)) {
return Status;
}
StartupCode = (STARTUP_CODE*)(VOID*)(UINTN) StartAddress;
CopyMem ((VOID*) StartupCode, &mStartupCodeTemplate, sizeof (*StartupCode));
StartupCode->RealSegment = (UINT16) (((UINTN) StartAddress) >> 4);
AsmReadGdtr (&Gdtr);
StartupCode->GdtLimit = Gdtr.Limit;
StartupCode->GdtBase = (UINT32) Gdtr.Base;
StartupCode->CpuDxeEntryValue = (UINTN) ApEntryPoint;
StartupCode->FlatJmpOffset += (UINT32) StartAddress;
#if defined (MDE_CPU_X64)
StartupCode->Cr3Value = (UINT32) AsmReadCr3 ();
StartupCode->LongJmpOffset += (UINT32) StartAddress;
#endif
SendInitSipiSipiAllExcludingSelf ((UINT32)(UINTN)(VOID*) StartupCode);
//
// Wait 100 milliseconds for APs to arrive at the ApEntryPoint routine
//
MicroSecondDelay (100 * 1000);
gBS->FreePages (StartAddress, EFI_SIZE_TO_PAGES (sizeof (*StartupCode)));
return EFI_SUCCESS;
}

View File

@ -32,6 +32,7 @@
#include <Library/UefiCpuLib.h>
#include <Library/UefiLib.h>
#include <Library/CpuExceptionHandlerLib.h>
#include <Library/TimerLib.h>
#include <Guid/IdleLoopEvent.h>
#include <Guid/VectorHandoffTable.h>

View File

@ -41,11 +41,14 @@
UefiCpuLib
UefiLib
CpuExceptionHandlerLib
TimerLib
[Sources]
ApStartup.c
CpuDxe.c
CpuDxe.h
CpuGdt.c
CpuGdt.h
CpuMp.c
CpuMp.h

View File

@ -24,6 +24,30 @@ InitializeMpSupport (
VOID
);
typedef
VOID
(EFIAPI *STACKLESS_AP_ENTRY_POINT)(
VOID
);
/**
Starts the Application Processors and directs them to jump to the
specified routine.
The processor jumps to this code in flat mode, but the processor's
stack is not initialized.
@param ApEntryPoint Pointer to the Entry Point routine
@retval EFI_SUCCESS The APs were started
@retval EFI_OUT_OF_RESOURCES Cannot allocate memory to start APs
**/
EFI_STATUS
StartApsStackless (
IN STACKLESS_AP_ENTRY_POINT ApEntryPoint
);
/**
The AP entry point that the Startup-IPI target code will jump to.