From 563c9c8a0320a3cfce802e8254304260277ab472 Mon Sep 17 00:00:00 2001 From: qhuang8 Date: Mon, 24 Aug 2009 15:53:25 +0000 Subject: [PATCH] Make end of line consistent. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9185 6f19259b-4bc3-4df7-8a09-765794883524 --- .../Bus/Pci/IdeBusDxe/Ide.h | 2 +- .../Bus/Pci/IdeBusDxe/IdeBus.c | 2952 ++++++++--------- 2 files changed, 1477 insertions(+), 1477 deletions(-) diff --git a/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/Ide.h b/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/Ide.h index 0b637e00f9..a5a2e02d7a 100644 --- a/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/Ide.h +++ b/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/Ide.h @@ -202,7 +202,7 @@ DiscoverIdeDevice ( detection of one channel. **/ -VOID +VOID InitializeIDEChannelData ( VOID ); diff --git a/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBus.c b/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBus.c index 629eadec52..3c7159502d 100644 --- a/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBus.c +++ b/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBus.c @@ -1,1520 +1,1520 @@ -/** @file +/** @file This file implement UEFI driver for IDE Bus which includes device identification, Child device(Disk, CDROM, etc) enumeration and child handler installation, and - driver stop. + driver stop. - Copyright (c) 2006 - 2008, Intel Corporation - All rights reserved. This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - - @par Revision Reference: - This module is modified from DXE\IDE module for Ide Contriller Init support - -**/ - -#include "IdeBus.h" - -#define PCI_CLASS_MASS_STORAGE 0x01 -#define PCI_SUB_CLASS_IDE 0x01 - - -// -// IDE Bus Driver Binding Protocol Instance -// -EFI_DRIVER_BINDING_PROTOCOL gIDEBusDriverBinding = { - IDEBusDriverBindingSupported, - IDEBusDriverBindingStart, - IDEBusDriverBindingStop, - 0xa, - NULL, - NULL -}; -/** - Deregister an IDE device and free resources - - @param This Protocol instance pointer. - @param Controller Ide device handle - @param Handle Handle of device to deregister driver on - - @retval EFI_SUCCESS Deregiter a specific IDE device successfully - - -**/ -EFI_STATUS -DeRegisterIdeDevice ( - IN EFI_DRIVER_BINDING_PROTOCOL *This, - IN EFI_HANDLE Controller, - IN EFI_HANDLE Handle - ) -{ - EFI_STATUS Status; - EFI_BLOCK_IO_PROTOCOL *BlkIo; - IDE_BLK_IO_DEV *IdeBlkIoDevice; - EFI_PCI_IO_PROTOCOL *PciIo; - UINTN Index; - - Status = gBS->OpenProtocol ( - Handle, - &gEfiBlockIoProtocolGuid, - (VOID **) &BlkIo, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_GET_PROTOCOL - ); - if (EFI_ERROR (Status)) { - return Status; - } - - IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (BlkIo); - - // - // Report Status code: Device disabled - // - REPORT_STATUS_CODE_WITH_DEVICE_PATH ( - EFI_PROGRESS_CODE, - (EFI_IO_BUS_ATA_ATAPI | EFI_P_PC_DISABLE), - IdeBlkIoDevice->DevicePath - ); - - // - // Close the child handle - // - Status = gBS->CloseProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - This->DriverBindingHandle, - Handle - ); - - Status = gBS->UninstallMultipleProtocolInterfaces ( - Handle, - &gEfiDevicePathProtocolGuid, - IdeBlkIoDevice->DevicePath, - &gEfiBlockIoProtocolGuid, - &IdeBlkIoDevice->BlkIo, - &gEfiDiskInfoProtocolGuid, - &IdeBlkIoDevice->DiskInfo, - NULL - ); - - if (EFI_ERROR (Status)) { - gBS->OpenProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - (VOID **) &PciIo, - This->DriverBindingHandle, - Handle, - EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER - ); - return Status; - } - - // - // Release allocated resources - // - Index = IdeBlkIoDevice->Channel * 2 + IdeBlkIoDevice->Device; - if (Index < MAX_IDE_DEVICE) { - IdeBlkIoDevice->IdeBusDriverPrivateData->HaveScannedDevice[Index] = FALSE; - } - ReleaseIdeResources (IdeBlkIoDevice); - - return EFI_SUCCESS; -} -/** - Supported function of Driver Binding protocol for this driver. - - @param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. - @param ControllerHandle The handle of the controller to test. - @param RemainingDevicePath A pointer to the remaining portion of a device path. - - @retval EFI_SUCCESS Driver loaded. - @retval other Driver not loaded. - -**/ -EFI_STATUS -EFIAPI -IDEBusDriverBindingSupported ( - IN EFI_DRIVER_BINDING_PROTOCOL *This, - IN EFI_HANDLE Controller, - IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath - ) -{ - EFI_STATUS Status; - EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; - EFI_DEV_PATH *Node; - EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit; - - if (RemainingDevicePath != NULL) { - Node = (EFI_DEV_PATH *) RemainingDevicePath; - if (Node->DevPath.Type != MESSAGING_DEVICE_PATH || - Node->DevPath.SubType != MSG_ATAPI_DP || - DevicePathNodeLength(&Node->DevPath) != sizeof(ATAPI_DEVICE_PATH)) { - return EFI_UNSUPPORTED; - } - } - - // - // Open the IO Abstraction(s) needed to perform the supported test - // - Status = gBS->OpenProtocol ( - Controller, - &gEfiDevicePathProtocolGuid, - (VOID **) &ParentDevicePath, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_BY_DRIVER - ); - if (Status == EFI_ALREADY_STARTED) { - return EFI_SUCCESS; - } - - if (EFI_ERROR (Status)) { - return Status; - } - - // - // Close protocol, don't use device path protocol in the .Support() function - // - gBS->CloseProtocol ( - Controller, - &gEfiDevicePathProtocolGuid, - This->DriverBindingHandle, - Controller - ); - - // - // Verify the Ide Controller Init Protocol, which installed by the - // IdeController module. - // Note 1: PciIo protocol has been opened BY_DRIVER by ide_init, so We can't - // open BY_DRIVER here) That's why we don't check pciio protocol - // Note 2: ide_init driver check ide controller's pci config space, so we dont - // check here any more to save code size - // - Status = gBS->OpenProtocol ( - Controller, - &gEfiIdeControllerInitProtocolGuid, - (VOID **) &IdeInit, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_BY_DRIVER - ); - - if (Status == EFI_ALREADY_STARTED) { - return EFI_SUCCESS; - } - - // - // If protocols were opened normally, closed it - // - gBS->CloseProtocol ( - Controller, - &gEfiIdeControllerInitProtocolGuid, - This->DriverBindingHandle, - Controller - ); - - return Status; -} - - -/** - Start function of Driver binding protocol which start this driver on Controller - by detecting all disks and installing BlockIo protocol on them. - - @param This Protocol instance pointer. - @param Controller Handle of device to bind driver to. - @param RemainingDevicePath produce all possible children. - - @retval EFI_SUCCESS This driver is added to ControllerHandle. - @retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle. - @retval other This driver does not support this device. - -**/ -EFI_STATUS -EFIAPI -IDEBusDriverBindingStart ( - IN EFI_DRIVER_BINDING_PROTOCOL *This, - IN EFI_HANDLE Controller, - IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath - ) -{ - EFI_STATUS Status; - EFI_STATUS SavedStatus; - EFI_PCI_IO_PROTOCOL *PciIo; - EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; - EFI_DEV_PATH *Node; - UINT8 IdeChannel; - UINT8 BeginningIdeChannel; - UINT8 EndIdeChannel; - UINT8 IdeDevice; - UINT8 BeginningIdeDevice; - UINT8 EndIdeDevice; - IDE_BLK_IO_DEV *IdeBlkIoDevice[IdeMaxChannel][IdeMaxDevice]; - IDE_BLK_IO_DEV *IdeBlkIoDevicePtr; - IDE_REGISTERS_BASE_ADDR IdeRegsBaseAddr[IdeMaxChannel]; - ATA_TRANSFER_MODE TransferMode; - ATA_DRIVE_PARMS DriveParameters; - EFI_DEV_PATH NewNode; - UINT8 ConfigurationOptions; - UINT16 CommandBlockBaseAddr; - UINT16 ControlBlockBaseAddr; - UINTN DataSize; - IDE_BUS_DRIVER_PRIVATE_DATA *IdeBusDriverPrivateData; - UINT64 Supports; - - // - // Local variables declaration for IdeControllerInit support - // - EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit; - BOOLEAN EnumAll; - BOOLEAN ChannelEnabled; - UINT8 MaxDevices; - EFI_IDENTIFY_DATA IdentifyData; - EFI_ATA_COLLECTIVE_MODE *SupportedModes; - - IdeBusDriverPrivateData = NULL; - SupportedModes = NULL; - - // - // Perform IdeBus initialization - // - Status = gBS->OpenProtocol ( - Controller, - &gEfiDevicePathProtocolGuid, - (VOID **) &ParentDevicePath, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_BY_DRIVER - ); - if ((EFI_ERROR (Status)) && (Status != EFI_ALREADY_STARTED)) { - return Status; - } - - // - // Now open the IDE_CONTROLLER_INIT protocol. Step7.1 - // - Status = gBS->OpenProtocol ( - Controller, - &gEfiIdeControllerInitProtocolGuid, - (VOID **) &IdeInit, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_BY_DRIVER - ); - - // - // The following OpenProtocol function with _GET_PROTOCOL attribute and - // will not return EFI_ALREADY_STARTED, so save it for now - // - SavedStatus = Status; - - if ((EFI_ERROR (Status)) && (Status != EFI_ALREADY_STARTED)) { - DEBUG ((EFI_D_ERROR, "Open Init, Status=%x", Status)); - // - // open protocol is not SUCCESS or not ALREADY_STARTED, error exit - // - goto ErrorExit; - } - - // - // Save Enumall. Step7.2 - // - EnumAll = IdeInit->EnumAll; - - // - // Consume PCI I/O protocol. Note that the OpenProtocol with _GET_PROTOCOL - // attribute will not return EFI_ALREADY_STARTED - // - Status = gBS->OpenProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - (VOID **) &PciIo, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_GET_PROTOCOL - ); - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "Open PciIo, Status=%x", Status)); - goto ErrorExit; - } - - // - // We must check EFI_ALREADY_STARTED because many ATAPI devices are removable - // - if (SavedStatus != EFI_ALREADY_STARTED) { - IdeBusDriverPrivateData = AllocatePool (sizeof (IDE_BUS_DRIVER_PRIVATE_DATA)); - if (IdeBusDriverPrivateData == NULL) { - Status = EFI_OUT_OF_RESOURCES; - goto ErrorExit; - } - - ZeroMem (IdeBusDriverPrivateData, sizeof (IDE_BUS_DRIVER_PRIVATE_DATA)); - Status = gBS->InstallMultipleProtocolInterfaces ( - &Controller, - &gEfiCallerIdGuid, - IdeBusDriverPrivateData, - NULL - ); - if (EFI_ERROR (Status)) { - goto ErrorExit; - } - - } else { - Status = gBS->OpenProtocol ( - Controller, - &gEfiCallerIdGuid, - (VOID **) &IdeBusDriverPrivateData, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_GET_PROTOCOL - ); - if (EFI_ERROR (Status)) { - IdeBusDriverPrivateData = NULL; - goto ErrorExit; - } - } - - Status = PciIo->Attributes ( - PciIo, - EfiPciIoAttributeOperationSupported, - 0, - &Supports - ); - if (!EFI_ERROR (Status)) { - Supports &= EFI_PCI_DEVICE_ENABLE; - Status = PciIo->Attributes ( - PciIo, - EfiPciIoAttributeOperationEnable, - Supports, - NULL - ); - } - - if (EFI_ERROR (Status)) { - goto ErrorExit; - } - - // - // Read the environment variable that contains the IDEBus Driver's - // Config options that were set by the Driver Configuration Protocol - // - DataSize = sizeof (ConfigurationOptions); - Status = gRT->GetVariable ( - (CHAR16 *) L"Configuration", - &gEfiCallerIdGuid, - NULL, - &DataSize, - &ConfigurationOptions - ); - if (EFI_ERROR (Status)) { - ConfigurationOptions = 0x0f; - } - - if (EnumAll) { - // - // If IdeInit->EnumAll is TRUE, must enumerate all IDE device anyway - // - BeginningIdeChannel = IdePrimary; - EndIdeChannel = IdeSecondary; - BeginningIdeDevice = IdeMaster; - EndIdeDevice = IdeSlave; - } else if (RemainingDevicePath == NULL) { - // - // RemainingDevicePath is NULL, scan IDE bus for each device; - // - BeginningIdeChannel = IdePrimary; - EndIdeChannel = IdeSecondary; - BeginningIdeDevice = IdeMaster; - // - // default, may be redefined by IdeInit - // - EndIdeDevice = IdeSlave; - } else { - // - // RemainingDevicePath is not NULL, only scan the specified device. - // - Node = (EFI_DEV_PATH *) RemainingDevicePath; - BeginningIdeChannel = Node->Atapi.PrimarySecondary; - EndIdeChannel = BeginningIdeChannel; - BeginningIdeDevice = Node->Atapi.SlaveMaster; - EndIdeDevice = BeginningIdeDevice; - if (BeginningIdeChannel >= IdeMaxChannel || EndIdeChannel >= IdeMaxChannel) { - Status = EFI_INVALID_PARAMETER; - goto ErrorExit; - } - if (BeginningIdeDevice >= IdeMaxDevice|| EndIdeDevice >= IdeMaxDevice) { - Status = EFI_INVALID_PARAMETER; - goto ErrorExit; - } - } - - // - // Obtain IDE IO port registers' base addresses - // - Status = GetIdeRegistersBaseAddr (PciIo, IdeRegsBaseAddr); - if (EFI_ERROR (Status)) { - goto ErrorExit; - } - - // - // Report status code: begin IdeBus initialization - // - REPORT_STATUS_CODE_WITH_DEVICE_PATH ( - EFI_PROGRESS_CODE, - (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_RESET), - ParentDevicePath - ); - - // - // Strictly follow the enumeration based on IDE_CONTROLLER_INIT protocol - // - for (IdeChannel = BeginningIdeChannel; IdeChannel <= EndIdeChannel; IdeChannel++) { - - IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelEnumeration, IdeChannel); - - // - // now obtain channel information fron IdeControllerInit protocol. Step9 - // - Status = IdeInit->GetChannelInfo ( - IdeInit, - IdeChannel, - &ChannelEnabled, - &MaxDevices - ); - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "[GetChannel, Status=%x]", Status)); - continue; - } - - if (!ChannelEnabled) { - continue; - } - - EndIdeDevice = (UINT8) MIN ((MaxDevices - 1), EndIdeDevice); - ASSERT (EndIdeDevice < IdeMaxDevice); - // - // Now inform the IDE Controller Init Module. Sept10 - // - IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelReset, IdeChannel); - - // - // No reset channel function implemented. Sept11 - // - IdeInit->NotifyPhase (IdeInit, EfiIdeAfterChannelReset, IdeChannel); - - // - // Step13 - // - IdeInit->NotifyPhase ( - IdeInit, - EfiIdeBusBeforeDevicePresenceDetection, - IdeChannel - ); - - // - // Prepare to detect IDE device of this channel - // - InitializeIDEChannelData (); - - // - // -- 1st inner loop --- Master/Slave ------------ Step14 - // - for (IdeDevice = BeginningIdeDevice; IdeDevice <= EndIdeDevice; IdeDevice++) { - // - // Check whether the configuration options allow this device - // - if ((ConfigurationOptions & (1 << (IdeChannel * 2 + IdeDevice))) == 0) { - continue; - } - - // - // The device has been scanned in another Start(), No need to scan it again - // for perf optimization. - // - if (IdeBusDriverPrivateData->HaveScannedDevice[IdeChannel * 2 + IdeDevice]) { - continue; - } - - // - // create child handle for the detected device. - // - IdeBlkIoDevice[IdeChannel][IdeDevice] = AllocatePool (sizeof (IDE_BLK_IO_DEV)); - if (IdeBlkIoDevice[IdeChannel][IdeDevice] == NULL) { - continue; - } - - IdeBlkIoDevicePtr = IdeBlkIoDevice[IdeChannel][IdeDevice]; - - ZeroMem (IdeBlkIoDevicePtr, sizeof (IDE_BLK_IO_DEV)); - - IdeBlkIoDevicePtr->Signature = IDE_BLK_IO_DEV_SIGNATURE; - IdeBlkIoDevicePtr->Channel = (EFI_IDE_CHANNEL) IdeChannel; - IdeBlkIoDevicePtr->Device = (EFI_IDE_DEVICE) IdeDevice; - - // - // initialize Block IO interface's Media pointer - // - IdeBlkIoDevicePtr->BlkIo.Media = &IdeBlkIoDevicePtr->BlkMedia; - - // - // Initialize IDE IO port addresses, including Command Block registers - // and Control Block registers - // - IdeBlkIoDevicePtr->IoPort = AllocatePool (sizeof (IDE_BASE_REGISTERS)); - if (IdeBlkIoDevicePtr->IoPort == NULL) { - continue; - } - - ZeroMem (IdeBlkIoDevicePtr->IoPort, sizeof (IDE_BASE_REGISTERS)); - CommandBlockBaseAddr = IdeRegsBaseAddr[IdeChannel].CommandBlockBaseAddr; - ControlBlockBaseAddr = IdeRegsBaseAddr[IdeChannel].ControlBlockBaseAddr; - - IdeBlkIoDevicePtr->IoPort->Data = CommandBlockBaseAddr; - (*(UINT16 *) &IdeBlkIoDevicePtr->IoPort->Reg1) = (UINT16) (CommandBlockBaseAddr + 0x01); - IdeBlkIoDevicePtr->IoPort->SectorCount = (UINT16) (CommandBlockBaseAddr + 0x02); - IdeBlkIoDevicePtr->IoPort->SectorNumber = (UINT16) (CommandBlockBaseAddr + 0x03); - IdeBlkIoDevicePtr->IoPort->CylinderLsb = (UINT16) (CommandBlockBaseAddr + 0x04); - IdeBlkIoDevicePtr->IoPort->CylinderMsb = (UINT16) (CommandBlockBaseAddr + 0x05); - IdeBlkIoDevicePtr->IoPort->Head = (UINT16) (CommandBlockBaseAddr + 0x06); - (*(UINT16 *) &IdeBlkIoDevicePtr->IoPort->Reg) = (UINT16) (CommandBlockBaseAddr + 0x07); - - (*(UINT16 *) &IdeBlkIoDevicePtr->IoPort->Alt) = ControlBlockBaseAddr; - IdeBlkIoDevicePtr->IoPort->DriveAddress = (UINT16) (ControlBlockBaseAddr + 0x01); - - IdeBlkIoDevicePtr->IoPort->MasterSlave = (UINT16) ((IdeDevice == IdeMaster) ? 1 : 0); - - IdeBlkIoDevicePtr->PciIo = PciIo; - IdeBlkIoDevicePtr->IdeBusDriverPrivateData = IdeBusDriverPrivateData; - IdeBlkIoDevicePtr->IoPort->BusMasterBaseAddr = IdeRegsBaseAddr[IdeChannel].BusMasterBaseAddr; - - // - // Report Status code: is about to detect IDE drive - // - REPORT_STATUS_CODE_EX ( - EFI_PROGRESS_CODE, - (EFI_IO_BUS_ATA_ATAPI | EFI_P_PC_PRESENCE_DETECT), - 0, - &gEfiCallerIdGuid, - NULL, - NULL, - 0 - ); - - // - // Discover device, now! - // - PERF_START (NULL, "DiscoverIdeDevice", "IDE", 0); - Status = DiscoverIdeDevice (IdeBlkIoDevicePtr); - PERF_END (NULL, "DiscoverIdeDevice", "IDE", 0); - - IdeBusDriverPrivateData->HaveScannedDevice[IdeChannel * 2 + IdeDevice] = TRUE; - IdeBusDriverPrivateData->DeviceProcessed[IdeChannel * 2 + IdeDevice] = FALSE; - - if (!EFI_ERROR (Status)) { - // - // Set Device Path - // - ZeroMem (&NewNode, sizeof (NewNode)); - NewNode.DevPath.Type = MESSAGING_DEVICE_PATH; - NewNode.DevPath.SubType = MSG_ATAPI_DP; - SetDevicePathNodeLength (&NewNode.DevPath, sizeof (ATAPI_DEVICE_PATH)); - - NewNode.Atapi.PrimarySecondary = (UINT8) IdeBlkIoDevicePtr->Channel; - NewNode.Atapi.SlaveMaster = (UINT8) IdeBlkIoDevicePtr->Device; - NewNode.Atapi.Lun = IdeBlkIoDevicePtr->Lun; - IdeBlkIoDevicePtr->DevicePath = AppendDevicePathNode ( - ParentDevicePath, - &NewNode.DevPath - ); - if (IdeBlkIoDevicePtr->DevicePath == NULL) { - ReleaseIdeResources (IdeBlkIoDevicePtr); - continue; - } - - // - // Submit identify data to IDE controller init driver - // - CopyMem (&IdentifyData, IdeBlkIoDevicePtr->IdData, sizeof (IdentifyData)); - IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = TRUE; - IdeInit->SubmitData (IdeInit, IdeChannel, IdeDevice, &IdentifyData); - } else { - // - // Device detection failed - // - IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE; - IdeInit->SubmitData (IdeInit, IdeChannel, IdeDevice, NULL); - ReleaseIdeResources (IdeBlkIoDevicePtr); - IdeBlkIoDevicePtr = NULL; - } - // - // end of 1st inner loop --- - // - } - // - // end of 1st outer loop ========= - // - } - - // - // = 2nd outer loop == Primary/Secondary ================= - // - for (IdeChannel = BeginningIdeChannel; IdeChannel <= EndIdeChannel; IdeChannel++) { - - // - // -- 2nd inner loop --- Master/Slave -------- - // - for (IdeDevice = BeginningIdeDevice; IdeDevice <= EndIdeDevice; IdeDevice++) { - - if (IdeBusDriverPrivateData->DeviceProcessed[IdeChannel * 2 + IdeDevice]) { - continue; - } - - if (!IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice]) { - continue; - } - - Status = IdeInit->CalculateMode ( - IdeInit, - IdeChannel, - IdeDevice, - &SupportedModes - ); - if (EFI_ERROR (Status)) { - DEBUG ((EFI_D_ERROR, "[bStStp20S=%x]", Status)); - continue; - } - - IdeBlkIoDevicePtr = IdeBlkIoDevice[IdeChannel][IdeDevice]; - - // - // Set best supported PIO mode on this IDE device - // - if (SupportedModes->PioMode.Mode <= AtaPioMode2) { - TransferMode.ModeCategory = ATA_MODE_CATEGORY_DEFAULT_PIO; - } else { - TransferMode.ModeCategory = ATA_MODE_CATEGORY_FLOW_PIO; - } - - TransferMode.ModeNumber = (UINT8) (SupportedModes->PioMode.Mode); - - if (SupportedModes->ExtModeCount == 0){ - Status = SetDeviceTransferMode (IdeBlkIoDevicePtr, &TransferMode); - - if (EFI_ERROR (Status)) { - IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE; - ReleaseIdeResources (IdeBlkIoDevicePtr); - IdeBlkIoDevicePtr = NULL; - continue; - } - } - - // - // Set supported DMA mode on this IDE device. Note that UDMA & MDMA cann't - // be set together. Only one DMA mode can be set to a device. If setting - // DMA mode operation fails, we can continue moving on because we only use - // PIO mode at boot time. DMA modes are used by certain kind of OS booting - // - if (SupportedModes->UdmaMode.Valid) { - - TransferMode.ModeCategory = ATA_MODE_CATEGORY_UDMA; - TransferMode.ModeNumber = (UINT8) (SupportedModes->UdmaMode.Mode); - Status = SetDeviceTransferMode (IdeBlkIoDevicePtr, &TransferMode); - - if (EFI_ERROR (Status)) { - IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE; - ReleaseIdeResources (IdeBlkIoDevicePtr); - IdeBlkIoDevicePtr = NULL; - continue; - } - // - // Record Udma Mode - // - IdeBlkIoDevicePtr->UdmaMode.Valid = TRUE; - IdeBlkIoDevicePtr->UdmaMode.Mode = SupportedModes->UdmaMode.Mode; - EnableInterrupt (IdeBlkIoDevicePtr); - } else if (SupportedModes->MultiWordDmaMode.Valid) { - - TransferMode.ModeCategory = ATA_MODE_CATEGORY_MDMA; - TransferMode.ModeNumber = (UINT8) SupportedModes->MultiWordDmaMode.Mode; - Status = SetDeviceTransferMode (IdeBlkIoDevicePtr, &TransferMode); - - if (EFI_ERROR (Status)) { - IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE; - ReleaseIdeResources (IdeBlkIoDevicePtr); - IdeBlkIoDevicePtr = NULL; - continue; - } - - EnableInterrupt (IdeBlkIoDevicePtr); - } - // - // Init driver parameters - // - DriveParameters.Sector = (UINT8) IdeBlkIoDevicePtr->IdData->AtaData.sectors_per_track; - DriveParameters.Heads = (UINT8) (IdeBlkIoDevicePtr->IdData->AtaData.heads - 1); - DriveParameters.MultipleSector = (UINT8) IdeBlkIoDevicePtr->IdData->AtaData.multi_sector_cmd_max_sct_cnt; - // - // Set Parameters for the device: - // 1) Init - // 2) Establish the block count for READ/WRITE MULTIPLE (EXT) command - // - if ((IdeBlkIoDevicePtr->Type == IdeHardDisk) || (IdeBlkIoDevicePtr->Type == Ide48bitAddressingHardDisk)) { - Status = SetDriveParameters (IdeBlkIoDevicePtr, &DriveParameters); - } - - // - // Record PIO mode used in private data - // - IdeBlkIoDevicePtr->PioMode = (ATA_PIO_MODE) SupportedModes->PioMode.Mode; - - // - // Set IDE controller Timing Blocks in the PCI Configuration Space - // - IdeInit->SetTiming (IdeInit, IdeChannel, IdeDevice, SupportedModes); - - // - // Add Component Name for the IDE/ATAPI device that was discovered. - // - IdeBlkIoDevicePtr->ControllerNameTable = NULL; - ADD_IDE_ATAPI_NAME (IdeBlkIoDevicePtr); - - Status = gBS->InstallMultipleProtocolInterfaces ( - &IdeBlkIoDevicePtr->Handle, - &gEfiDevicePathProtocolGuid, - IdeBlkIoDevicePtr->DevicePath, - &gEfiBlockIoProtocolGuid, - &IdeBlkIoDevicePtr->BlkIo, - &gEfiDiskInfoProtocolGuid, - &IdeBlkIoDevicePtr->DiskInfo, - NULL - ); - - if (EFI_ERROR (Status)) { - ReleaseIdeResources (IdeBlkIoDevicePtr); - } - - gBS->OpenProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - (VOID **) &PciIo, - This->DriverBindingHandle, - IdeBlkIoDevicePtr->Handle, - EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER - ); - - IdeBusDriverPrivateData->DeviceProcessed[IdeChannel * 2 + IdeDevice] = TRUE; - - // - // Report status code: device eanbled! - // - REPORT_STATUS_CODE_WITH_DEVICE_PATH ( - EFI_PROGRESS_CODE, - (EFI_IO_BUS_ATA_ATAPI | EFI_P_PC_ENABLE), - IdeBlkIoDevicePtr->DevicePath - ); - - // - // Create event to clear pending IDE interrupt - // - Status = gBS->CreateEventEx ( - EVT_NOTIFY_SIGNAL, - TPL_NOTIFY, - ClearInterrupt, - IdeBlkIoDevicePtr, - &gEfiEventExitBootServicesGuid, - &IdeBlkIoDevicePtr->ExitBootServiceEvent - ); - - // - // end of 2nd inner loop ---- - // - } - // - // end of 2nd outer loop ========== - // - } - - // - // All configurations done! Notify IdeController to do post initialization - // work such as saving IDE controller PCI settings for S3 resume - // - IdeInit->NotifyPhase (IdeInit, EfiIdeBusPhaseMaximum, 0); - - if (SupportedModes != NULL) { - gBS->FreePool (SupportedModes); - } - - PERF_START (NULL, "Finish IDE detection", "IDE", 1); - PERF_END (NULL, "Finish IDE detection", "IDE", 0); - - return EFI_SUCCESS; - -ErrorExit: - - // - // Report error code: controller error - // - REPORT_STATUS_CODE_WITH_DEVICE_PATH ( - EFI_ERROR_CODE | EFI_ERROR_MINOR, - (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_EC_CONTROLLER_ERROR), - ParentDevicePath - ); - - gBS->CloseProtocol ( - Controller, - &gEfiIdeControllerInitProtocolGuid, - This->DriverBindingHandle, - Controller - ); - - gBS->UninstallMultipleProtocolInterfaces ( - Controller, - &gEfiCallerIdGuid, - IdeBusDriverPrivateData, - NULL - ); - - if (IdeBusDriverPrivateData != NULL) { - gBS->FreePool (IdeBusDriverPrivateData); - } - - if (SupportedModes != NULL) { - gBS->FreePool (SupportedModes); - } - - gBS->CloseProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - This->DriverBindingHandle, - Controller - ); - - gBS->CloseProtocol ( - Controller, - &gEfiDevicePathProtocolGuid, - This->DriverBindingHandle, - Controller - ); - - return Status; - -} -/** - Stop function of Driver Binding Protocol which is to stop the driver on Controller Handle and all - child handle attached to the controller handle if there are. - - @param This Protocol instance pointer. - @param Controller Handle of device to stop driver on - @param NumberOfChildren Not used - @param ChildHandleBuffer Not used - - @retval EFI_SUCCESS This driver is removed DeviceHandle - @retval other This driver was not removed from this device - -**/ -EFI_STATUS -EFIAPI -IDEBusDriverBindingStop ( - IN EFI_DRIVER_BINDING_PROTOCOL *This, - IN EFI_HANDLE Controller, - IN UINTN NumberOfChildren, - IN EFI_HANDLE *ChildHandleBuffer - ) -{ - EFI_STATUS Status; - EFI_PCI_IO_PROTOCOL *PciIo; - BOOLEAN AllChildrenStopped; - UINTN Index; - IDE_BUS_DRIVER_PRIVATE_DATA *IdeBusDriverPrivateData; - UINT64 Supports; - - IdeBusDriverPrivateData = NULL; - - if (NumberOfChildren == 0) { - - Status = gBS->OpenProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - (VOID **) &PciIo, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_GET_PROTOCOL - ); - if (!EFI_ERROR (Status)) { - Status = PciIo->Attributes ( - PciIo, - EfiPciIoAttributeOperationSupported, - 0, - &Supports - ); - if (!EFI_ERROR (Status)) { - Supports &= EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO | EFI_PCI_DEVICE_ENABLE; - PciIo->Attributes ( - PciIo, - EfiPciIoAttributeOperationDisable, - Supports, - NULL - ); - } - } - - gBS->OpenProtocol ( - Controller, - &gEfiCallerIdGuid, - (VOID **) &IdeBusDriverPrivateData, - This->DriverBindingHandle, - Controller, - EFI_OPEN_PROTOCOL_GET_PROTOCOL - ); - - gBS->UninstallMultipleProtocolInterfaces ( - Controller, - &gEfiCallerIdGuid, - IdeBusDriverPrivateData, - NULL - ); - - if (IdeBusDriverPrivateData != NULL) { - gBS->FreePool (IdeBusDriverPrivateData); - } - // - // Close the bus driver - // - gBS->CloseProtocol ( - Controller, - &gEfiIdeControllerInitProtocolGuid, - This->DriverBindingHandle, - Controller - ); - gBS->CloseProtocol ( - Controller, - &gEfiPciIoProtocolGuid, - This->DriverBindingHandle, - Controller - ); - gBS->CloseProtocol ( - Controller, - &gEfiDevicePathProtocolGuid, - This->DriverBindingHandle, - Controller - ); - - return EFI_SUCCESS; - } - - AllChildrenStopped = TRUE; - - for (Index = 0; Index < NumberOfChildren; Index++) { - - Status = DeRegisterIdeDevice (This, Controller, ChildHandleBuffer[Index]); - - if (EFI_ERROR (Status)) { - AllChildrenStopped = FALSE; - } - } - - if (!AllChildrenStopped) { - return EFI_DEVICE_ERROR; - } - - return EFI_SUCCESS; -} - -/** - issue ATA or ATAPI command to reset a block IO device. - @param This Block IO protocol instance pointer. - @param ExtendedVerification If FALSE,for ATAPI device, driver will only invoke ATAPI reset method - If TRUE, for ATAPI device, driver need invoke ATA reset method after - invoke ATAPI reset method - - @retval EFI_DEVICE_ERROR When the device is neighther ATA device or ATAPI device. - @retval EFI_SUCCESS The device reset successfully - -**/ -EFI_STATUS -EFIAPI -IDEBlkIoReset ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN BOOLEAN ExtendedVerification - ) -{ - IDE_BLK_IO_DEV *IdeBlkIoDevice; - EFI_STATUS Status; - EFI_TPL OldTpl; - - OldTpl = gBS->RaiseTPL (TPL_CALLBACK); - - IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This); - // - // Requery IDE IO resources in case of the switch of native and legacy modes - // - ReassignIdeResources (IdeBlkIoDevice); - - // - // for ATA device, using ATA reset method - // - if (IdeBlkIoDevice->Type == IdeHardDisk || - IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) { - Status = AtaSoftReset (IdeBlkIoDevice); - goto Done; - } - - if (IdeBlkIoDevice->Type == IdeUnknown) { - Status = EFI_DEVICE_ERROR; - goto Done; - } - - // - // for ATAPI device, using ATAPI reset method - // - Status = AtapiSoftReset (IdeBlkIoDevice); - if (ExtendedVerification) { - Status = AtaSoftReset (IdeBlkIoDevice); - } - -Done: - gBS->RestoreTPL (OldTpl); - return Status; -} - -/** - Read data from a block IO device - - @param This Block IO protocol instance pointer. - @param MediaId The media ID of the device + Copyright (c) 2006 - 2008, Intel Corporation + All rights reserved. This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + @par Revision Reference: + This module is modified from DXE\IDE module for Ide Contriller Init support + +**/ + +#include "IdeBus.h" + +#define PCI_CLASS_MASS_STORAGE 0x01 +#define PCI_SUB_CLASS_IDE 0x01 + + +// +// IDE Bus Driver Binding Protocol Instance +// +EFI_DRIVER_BINDING_PROTOCOL gIDEBusDriverBinding = { + IDEBusDriverBindingSupported, + IDEBusDriverBindingStart, + IDEBusDriverBindingStop, + 0xa, + NULL, + NULL +}; +/** + Deregister an IDE device and free resources + + @param This Protocol instance pointer. + @param Controller Ide device handle + @param Handle Handle of device to deregister driver on + + @retval EFI_SUCCESS Deregiter a specific IDE device successfully + + +**/ +EFI_STATUS +DeRegisterIdeDevice ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Controller, + IN EFI_HANDLE Handle + ) +{ + EFI_STATUS Status; + EFI_BLOCK_IO_PROTOCOL *BlkIo; + IDE_BLK_IO_DEV *IdeBlkIoDevice; + EFI_PCI_IO_PROTOCOL *PciIo; + UINTN Index; + + Status = gBS->OpenProtocol ( + Handle, + &gEfiBlockIoProtocolGuid, + (VOID **) &BlkIo, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (EFI_ERROR (Status)) { + return Status; + } + + IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (BlkIo); + + // + // Report Status code: Device disabled + // + REPORT_STATUS_CODE_WITH_DEVICE_PATH ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_P_PC_DISABLE), + IdeBlkIoDevice->DevicePath + ); + + // + // Close the child handle + // + Status = gBS->CloseProtocol ( + Controller, + &gEfiPciIoProtocolGuid, + This->DriverBindingHandle, + Handle + ); + + Status = gBS->UninstallMultipleProtocolInterfaces ( + Handle, + &gEfiDevicePathProtocolGuid, + IdeBlkIoDevice->DevicePath, + &gEfiBlockIoProtocolGuid, + &IdeBlkIoDevice->BlkIo, + &gEfiDiskInfoProtocolGuid, + &IdeBlkIoDevice->DiskInfo, + NULL + ); + + if (EFI_ERROR (Status)) { + gBS->OpenProtocol ( + Controller, + &gEfiPciIoProtocolGuid, + (VOID **) &PciIo, + This->DriverBindingHandle, + Handle, + EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER + ); + return Status; + } + + // + // Release allocated resources + // + Index = IdeBlkIoDevice->Channel * 2 + IdeBlkIoDevice->Device; + if (Index < MAX_IDE_DEVICE) { + IdeBlkIoDevice->IdeBusDriverPrivateData->HaveScannedDevice[Index] = FALSE; + } + ReleaseIdeResources (IdeBlkIoDevice); + + return EFI_SUCCESS; +} +/** + Supported function of Driver Binding protocol for this driver. + + @param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. + @param ControllerHandle The handle of the controller to test. + @param RemainingDevicePath A pointer to the remaining portion of a device path. + + @retval EFI_SUCCESS Driver loaded. + @retval other Driver not loaded. + +**/ +EFI_STATUS +EFIAPI +IDEBusDriverBindingSupported ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Controller, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ) +{ + EFI_STATUS Status; + EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; + EFI_DEV_PATH *Node; + EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit; + + if (RemainingDevicePath != NULL) { + Node = (EFI_DEV_PATH *) RemainingDevicePath; + if (Node->DevPath.Type != MESSAGING_DEVICE_PATH || + Node->DevPath.SubType != MSG_ATAPI_DP || + DevicePathNodeLength(&Node->DevPath) != sizeof(ATAPI_DEVICE_PATH)) { + return EFI_UNSUPPORTED; + } + } + + // + // Open the IO Abstraction(s) needed to perform the supported test + // + Status = gBS->OpenProtocol ( + Controller, + &gEfiDevicePathProtocolGuid, + (VOID **) &ParentDevicePath, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (Status == EFI_ALREADY_STARTED) { + return EFI_SUCCESS; + } + + if (EFI_ERROR (Status)) { + return Status; + } + + // + // Close protocol, don't use device path protocol in the .Support() function + // + gBS->CloseProtocol ( + Controller, + &gEfiDevicePathProtocolGuid, + This->DriverBindingHandle, + Controller + ); + + // + // Verify the Ide Controller Init Protocol, which installed by the + // IdeController module. + // Note 1: PciIo protocol has been opened BY_DRIVER by ide_init, so We can't + // open BY_DRIVER here) That's why we don't check pciio protocol + // Note 2: ide_init driver check ide controller's pci config space, so we dont + // check here any more to save code size + // + Status = gBS->OpenProtocol ( + Controller, + &gEfiIdeControllerInitProtocolGuid, + (VOID **) &IdeInit, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + + if (Status == EFI_ALREADY_STARTED) { + return EFI_SUCCESS; + } + + // + // If protocols were opened normally, closed it + // + gBS->CloseProtocol ( + Controller, + &gEfiIdeControllerInitProtocolGuid, + This->DriverBindingHandle, + Controller + ); + + return Status; +} + + +/** + Start function of Driver binding protocol which start this driver on Controller + by detecting all disks and installing BlockIo protocol on them. + + @param This Protocol instance pointer. + @param Controller Handle of device to bind driver to. + @param RemainingDevicePath produce all possible children. + + @retval EFI_SUCCESS This driver is added to ControllerHandle. + @retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle. + @retval other This driver does not support this device. + +**/ +EFI_STATUS +EFIAPI +IDEBusDriverBindingStart ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Controller, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ) +{ + EFI_STATUS Status; + EFI_STATUS SavedStatus; + EFI_PCI_IO_PROTOCOL *PciIo; + EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; + EFI_DEV_PATH *Node; + UINT8 IdeChannel; + UINT8 BeginningIdeChannel; + UINT8 EndIdeChannel; + UINT8 IdeDevice; + UINT8 BeginningIdeDevice; + UINT8 EndIdeDevice; + IDE_BLK_IO_DEV *IdeBlkIoDevice[IdeMaxChannel][IdeMaxDevice]; + IDE_BLK_IO_DEV *IdeBlkIoDevicePtr; + IDE_REGISTERS_BASE_ADDR IdeRegsBaseAddr[IdeMaxChannel]; + ATA_TRANSFER_MODE TransferMode; + ATA_DRIVE_PARMS DriveParameters; + EFI_DEV_PATH NewNode; + UINT8 ConfigurationOptions; + UINT16 CommandBlockBaseAddr; + UINT16 ControlBlockBaseAddr; + UINTN DataSize; + IDE_BUS_DRIVER_PRIVATE_DATA *IdeBusDriverPrivateData; + UINT64 Supports; + + // + // Local variables declaration for IdeControllerInit support + // + EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit; + BOOLEAN EnumAll; + BOOLEAN ChannelEnabled; + UINT8 MaxDevices; + EFI_IDENTIFY_DATA IdentifyData; + EFI_ATA_COLLECTIVE_MODE *SupportedModes; + + IdeBusDriverPrivateData = NULL; + SupportedModes = NULL; + + // + // Perform IdeBus initialization + // + Status = gBS->OpenProtocol ( + Controller, + &gEfiDevicePathProtocolGuid, + (VOID **) &ParentDevicePath, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if ((EFI_ERROR (Status)) && (Status != EFI_ALREADY_STARTED)) { + return Status; + } + + // + // Now open the IDE_CONTROLLER_INIT protocol. Step7.1 + // + Status = gBS->OpenProtocol ( + Controller, + &gEfiIdeControllerInitProtocolGuid, + (VOID **) &IdeInit, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + + // + // The following OpenProtocol function with _GET_PROTOCOL attribute and + // will not return EFI_ALREADY_STARTED, so save it for now + // + SavedStatus = Status; + + if ((EFI_ERROR (Status)) && (Status != EFI_ALREADY_STARTED)) { + DEBUG ((EFI_D_ERROR, "Open Init, Status=%x", Status)); + // + // open protocol is not SUCCESS or not ALREADY_STARTED, error exit + // + goto ErrorExit; + } + + // + // Save Enumall. Step7.2 + // + EnumAll = IdeInit->EnumAll; + + // + // Consume PCI I/O protocol. Note that the OpenProtocol with _GET_PROTOCOL + // attribute will not return EFI_ALREADY_STARTED + // + Status = gBS->OpenProtocol ( + Controller, + &gEfiPciIoProtocolGuid, + (VOID **) &PciIo, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "Open PciIo, Status=%x", Status)); + goto ErrorExit; + } + + // + // We must check EFI_ALREADY_STARTED because many ATAPI devices are removable + // + if (SavedStatus != EFI_ALREADY_STARTED) { + IdeBusDriverPrivateData = AllocatePool (sizeof (IDE_BUS_DRIVER_PRIVATE_DATA)); + if (IdeBusDriverPrivateData == NULL) { + Status = EFI_OUT_OF_RESOURCES; + goto ErrorExit; + } + + ZeroMem (IdeBusDriverPrivateData, sizeof (IDE_BUS_DRIVER_PRIVATE_DATA)); + Status = gBS->InstallMultipleProtocolInterfaces ( + &Controller, + &gEfiCallerIdGuid, + IdeBusDriverPrivateData, + NULL + ); + if (EFI_ERROR (Status)) { + goto ErrorExit; + } + + } else { + Status = gBS->OpenProtocol ( + Controller, + &gEfiCallerIdGuid, + (VOID **) &IdeBusDriverPrivateData, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (EFI_ERROR (Status)) { + IdeBusDriverPrivateData = NULL; + goto ErrorExit; + } + } + + Status = PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationSupported, + 0, + &Supports + ); + if (!EFI_ERROR (Status)) { + Supports &= EFI_PCI_DEVICE_ENABLE; + Status = PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationEnable, + Supports, + NULL + ); + } + + if (EFI_ERROR (Status)) { + goto ErrorExit; + } + + // + // Read the environment variable that contains the IDEBus Driver's + // Config options that were set by the Driver Configuration Protocol + // + DataSize = sizeof (ConfigurationOptions); + Status = gRT->GetVariable ( + (CHAR16 *) L"Configuration", + &gEfiCallerIdGuid, + NULL, + &DataSize, + &ConfigurationOptions + ); + if (EFI_ERROR (Status)) { + ConfigurationOptions = 0x0f; + } + + if (EnumAll) { + // + // If IdeInit->EnumAll is TRUE, must enumerate all IDE device anyway + // + BeginningIdeChannel = IdePrimary; + EndIdeChannel = IdeSecondary; + BeginningIdeDevice = IdeMaster; + EndIdeDevice = IdeSlave; + } else if (RemainingDevicePath == NULL) { + // + // RemainingDevicePath is NULL, scan IDE bus for each device; + // + BeginningIdeChannel = IdePrimary; + EndIdeChannel = IdeSecondary; + BeginningIdeDevice = IdeMaster; + // + // default, may be redefined by IdeInit + // + EndIdeDevice = IdeSlave; + } else { + // + // RemainingDevicePath is not NULL, only scan the specified device. + // + Node = (EFI_DEV_PATH *) RemainingDevicePath; + BeginningIdeChannel = Node->Atapi.PrimarySecondary; + EndIdeChannel = BeginningIdeChannel; + BeginningIdeDevice = Node->Atapi.SlaveMaster; + EndIdeDevice = BeginningIdeDevice; + if (BeginningIdeChannel >= IdeMaxChannel || EndIdeChannel >= IdeMaxChannel) { + Status = EFI_INVALID_PARAMETER; + goto ErrorExit; + } + if (BeginningIdeDevice >= IdeMaxDevice|| EndIdeDevice >= IdeMaxDevice) { + Status = EFI_INVALID_PARAMETER; + goto ErrorExit; + } + } + + // + // Obtain IDE IO port registers' base addresses + // + Status = GetIdeRegistersBaseAddr (PciIo, IdeRegsBaseAddr); + if (EFI_ERROR (Status)) { + goto ErrorExit; + } + + // + // Report status code: begin IdeBus initialization + // + REPORT_STATUS_CODE_WITH_DEVICE_PATH ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_RESET), + ParentDevicePath + ); + + // + // Strictly follow the enumeration based on IDE_CONTROLLER_INIT protocol + // + for (IdeChannel = BeginningIdeChannel; IdeChannel <= EndIdeChannel; IdeChannel++) { + + IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelEnumeration, IdeChannel); + + // + // now obtain channel information fron IdeControllerInit protocol. Step9 + // + Status = IdeInit->GetChannelInfo ( + IdeInit, + IdeChannel, + &ChannelEnabled, + &MaxDevices + ); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "[GetChannel, Status=%x]", Status)); + continue; + } + + if (!ChannelEnabled) { + continue; + } + + EndIdeDevice = (UINT8) MIN ((MaxDevices - 1), EndIdeDevice); + ASSERT (EndIdeDevice < IdeMaxDevice); + // + // Now inform the IDE Controller Init Module. Sept10 + // + IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelReset, IdeChannel); + + // + // No reset channel function implemented. Sept11 + // + IdeInit->NotifyPhase (IdeInit, EfiIdeAfterChannelReset, IdeChannel); + + // + // Step13 + // + IdeInit->NotifyPhase ( + IdeInit, + EfiIdeBusBeforeDevicePresenceDetection, + IdeChannel + ); + + // + // Prepare to detect IDE device of this channel + // + InitializeIDEChannelData (); + + // + // -- 1st inner loop --- Master/Slave ------------ Step14 + // + for (IdeDevice = BeginningIdeDevice; IdeDevice <= EndIdeDevice; IdeDevice++) { + // + // Check whether the configuration options allow this device + // + if ((ConfigurationOptions & (1 << (IdeChannel * 2 + IdeDevice))) == 0) { + continue; + } + + // + // The device has been scanned in another Start(), No need to scan it again + // for perf optimization. + // + if (IdeBusDriverPrivateData->HaveScannedDevice[IdeChannel * 2 + IdeDevice]) { + continue; + } + + // + // create child handle for the detected device. + // + IdeBlkIoDevice[IdeChannel][IdeDevice] = AllocatePool (sizeof (IDE_BLK_IO_DEV)); + if (IdeBlkIoDevice[IdeChannel][IdeDevice] == NULL) { + continue; + } + + IdeBlkIoDevicePtr = IdeBlkIoDevice[IdeChannel][IdeDevice]; + + ZeroMem (IdeBlkIoDevicePtr, sizeof (IDE_BLK_IO_DEV)); + + IdeBlkIoDevicePtr->Signature = IDE_BLK_IO_DEV_SIGNATURE; + IdeBlkIoDevicePtr->Channel = (EFI_IDE_CHANNEL) IdeChannel; + IdeBlkIoDevicePtr->Device = (EFI_IDE_DEVICE) IdeDevice; + + // + // initialize Block IO interface's Media pointer + // + IdeBlkIoDevicePtr->BlkIo.Media = &IdeBlkIoDevicePtr->BlkMedia; + + // + // Initialize IDE IO port addresses, including Command Block registers + // and Control Block registers + // + IdeBlkIoDevicePtr->IoPort = AllocatePool (sizeof (IDE_BASE_REGISTERS)); + if (IdeBlkIoDevicePtr->IoPort == NULL) { + continue; + } + + ZeroMem (IdeBlkIoDevicePtr->IoPort, sizeof (IDE_BASE_REGISTERS)); + CommandBlockBaseAddr = IdeRegsBaseAddr[IdeChannel].CommandBlockBaseAddr; + ControlBlockBaseAddr = IdeRegsBaseAddr[IdeChannel].ControlBlockBaseAddr; + + IdeBlkIoDevicePtr->IoPort->Data = CommandBlockBaseAddr; + (*(UINT16 *) &IdeBlkIoDevicePtr->IoPort->Reg1) = (UINT16) (CommandBlockBaseAddr + 0x01); + IdeBlkIoDevicePtr->IoPort->SectorCount = (UINT16) (CommandBlockBaseAddr + 0x02); + IdeBlkIoDevicePtr->IoPort->SectorNumber = (UINT16) (CommandBlockBaseAddr + 0x03); + IdeBlkIoDevicePtr->IoPort->CylinderLsb = (UINT16) (CommandBlockBaseAddr + 0x04); + IdeBlkIoDevicePtr->IoPort->CylinderMsb = (UINT16) (CommandBlockBaseAddr + 0x05); + IdeBlkIoDevicePtr->IoPort->Head = (UINT16) (CommandBlockBaseAddr + 0x06); + (*(UINT16 *) &IdeBlkIoDevicePtr->IoPort->Reg) = (UINT16) (CommandBlockBaseAddr + 0x07); + + (*(UINT16 *) &IdeBlkIoDevicePtr->IoPort->Alt) = ControlBlockBaseAddr; + IdeBlkIoDevicePtr->IoPort->DriveAddress = (UINT16) (ControlBlockBaseAddr + 0x01); + + IdeBlkIoDevicePtr->IoPort->MasterSlave = (UINT16) ((IdeDevice == IdeMaster) ? 1 : 0); + + IdeBlkIoDevicePtr->PciIo = PciIo; + IdeBlkIoDevicePtr->IdeBusDriverPrivateData = IdeBusDriverPrivateData; + IdeBlkIoDevicePtr->IoPort->BusMasterBaseAddr = IdeRegsBaseAddr[IdeChannel].BusMasterBaseAddr; + + // + // Report Status code: is about to detect IDE drive + // + REPORT_STATUS_CODE_EX ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_P_PC_PRESENCE_DETECT), + 0, + &gEfiCallerIdGuid, + NULL, + NULL, + 0 + ); + + // + // Discover device, now! + // + PERF_START (NULL, "DiscoverIdeDevice", "IDE", 0); + Status = DiscoverIdeDevice (IdeBlkIoDevicePtr); + PERF_END (NULL, "DiscoverIdeDevice", "IDE", 0); + + IdeBusDriverPrivateData->HaveScannedDevice[IdeChannel * 2 + IdeDevice] = TRUE; + IdeBusDriverPrivateData->DeviceProcessed[IdeChannel * 2 + IdeDevice] = FALSE; + + if (!EFI_ERROR (Status)) { + // + // Set Device Path + // + ZeroMem (&NewNode, sizeof (NewNode)); + NewNode.DevPath.Type = MESSAGING_DEVICE_PATH; + NewNode.DevPath.SubType = MSG_ATAPI_DP; + SetDevicePathNodeLength (&NewNode.DevPath, sizeof (ATAPI_DEVICE_PATH)); + + NewNode.Atapi.PrimarySecondary = (UINT8) IdeBlkIoDevicePtr->Channel; + NewNode.Atapi.SlaveMaster = (UINT8) IdeBlkIoDevicePtr->Device; + NewNode.Atapi.Lun = IdeBlkIoDevicePtr->Lun; + IdeBlkIoDevicePtr->DevicePath = AppendDevicePathNode ( + ParentDevicePath, + &NewNode.DevPath + ); + if (IdeBlkIoDevicePtr->DevicePath == NULL) { + ReleaseIdeResources (IdeBlkIoDevicePtr); + continue; + } + + // + // Submit identify data to IDE controller init driver + // + CopyMem (&IdentifyData, IdeBlkIoDevicePtr->IdData, sizeof (IdentifyData)); + IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = TRUE; + IdeInit->SubmitData (IdeInit, IdeChannel, IdeDevice, &IdentifyData); + } else { + // + // Device detection failed + // + IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE; + IdeInit->SubmitData (IdeInit, IdeChannel, IdeDevice, NULL); + ReleaseIdeResources (IdeBlkIoDevicePtr); + IdeBlkIoDevicePtr = NULL; + } + // + // end of 1st inner loop --- + // + } + // + // end of 1st outer loop ========= + // + } + + // + // = 2nd outer loop == Primary/Secondary ================= + // + for (IdeChannel = BeginningIdeChannel; IdeChannel <= EndIdeChannel; IdeChannel++) { + + // + // -- 2nd inner loop --- Master/Slave -------- + // + for (IdeDevice = BeginningIdeDevice; IdeDevice <= EndIdeDevice; IdeDevice++) { + + if (IdeBusDriverPrivateData->DeviceProcessed[IdeChannel * 2 + IdeDevice]) { + continue; + } + + if (!IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice]) { + continue; + } + + Status = IdeInit->CalculateMode ( + IdeInit, + IdeChannel, + IdeDevice, + &SupportedModes + ); + if (EFI_ERROR (Status)) { + DEBUG ((EFI_D_ERROR, "[bStStp20S=%x]", Status)); + continue; + } + + IdeBlkIoDevicePtr = IdeBlkIoDevice[IdeChannel][IdeDevice]; + + // + // Set best supported PIO mode on this IDE device + // + if (SupportedModes->PioMode.Mode <= AtaPioMode2) { + TransferMode.ModeCategory = ATA_MODE_CATEGORY_DEFAULT_PIO; + } else { + TransferMode.ModeCategory = ATA_MODE_CATEGORY_FLOW_PIO; + } + + TransferMode.ModeNumber = (UINT8) (SupportedModes->PioMode.Mode); + + if (SupportedModes->ExtModeCount == 0){ + Status = SetDeviceTransferMode (IdeBlkIoDevicePtr, &TransferMode); + + if (EFI_ERROR (Status)) { + IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE; + ReleaseIdeResources (IdeBlkIoDevicePtr); + IdeBlkIoDevicePtr = NULL; + continue; + } + } + + // + // Set supported DMA mode on this IDE device. Note that UDMA & MDMA cann't + // be set together. Only one DMA mode can be set to a device. If setting + // DMA mode operation fails, we can continue moving on because we only use + // PIO mode at boot time. DMA modes are used by certain kind of OS booting + // + if (SupportedModes->UdmaMode.Valid) { + + TransferMode.ModeCategory = ATA_MODE_CATEGORY_UDMA; + TransferMode.ModeNumber = (UINT8) (SupportedModes->UdmaMode.Mode); + Status = SetDeviceTransferMode (IdeBlkIoDevicePtr, &TransferMode); + + if (EFI_ERROR (Status)) { + IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE; + ReleaseIdeResources (IdeBlkIoDevicePtr); + IdeBlkIoDevicePtr = NULL; + continue; + } + // + // Record Udma Mode + // + IdeBlkIoDevicePtr->UdmaMode.Valid = TRUE; + IdeBlkIoDevicePtr->UdmaMode.Mode = SupportedModes->UdmaMode.Mode; + EnableInterrupt (IdeBlkIoDevicePtr); + } else if (SupportedModes->MultiWordDmaMode.Valid) { + + TransferMode.ModeCategory = ATA_MODE_CATEGORY_MDMA; + TransferMode.ModeNumber = (UINT8) SupportedModes->MultiWordDmaMode.Mode; + Status = SetDeviceTransferMode (IdeBlkIoDevicePtr, &TransferMode); + + if (EFI_ERROR (Status)) { + IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE; + ReleaseIdeResources (IdeBlkIoDevicePtr); + IdeBlkIoDevicePtr = NULL; + continue; + } + + EnableInterrupt (IdeBlkIoDevicePtr); + } + // + // Init driver parameters + // + DriveParameters.Sector = (UINT8) IdeBlkIoDevicePtr->IdData->AtaData.sectors_per_track; + DriveParameters.Heads = (UINT8) (IdeBlkIoDevicePtr->IdData->AtaData.heads - 1); + DriveParameters.MultipleSector = (UINT8) IdeBlkIoDevicePtr->IdData->AtaData.multi_sector_cmd_max_sct_cnt; + // + // Set Parameters for the device: + // 1) Init + // 2) Establish the block count for READ/WRITE MULTIPLE (EXT) command + // + if ((IdeBlkIoDevicePtr->Type == IdeHardDisk) || (IdeBlkIoDevicePtr->Type == Ide48bitAddressingHardDisk)) { + Status = SetDriveParameters (IdeBlkIoDevicePtr, &DriveParameters); + } + + // + // Record PIO mode used in private data + // + IdeBlkIoDevicePtr->PioMode = (ATA_PIO_MODE) SupportedModes->PioMode.Mode; + + // + // Set IDE controller Timing Blocks in the PCI Configuration Space + // + IdeInit->SetTiming (IdeInit, IdeChannel, IdeDevice, SupportedModes); + + // + // Add Component Name for the IDE/ATAPI device that was discovered. + // + IdeBlkIoDevicePtr->ControllerNameTable = NULL; + ADD_IDE_ATAPI_NAME (IdeBlkIoDevicePtr); + + Status = gBS->InstallMultipleProtocolInterfaces ( + &IdeBlkIoDevicePtr->Handle, + &gEfiDevicePathProtocolGuid, + IdeBlkIoDevicePtr->DevicePath, + &gEfiBlockIoProtocolGuid, + &IdeBlkIoDevicePtr->BlkIo, + &gEfiDiskInfoProtocolGuid, + &IdeBlkIoDevicePtr->DiskInfo, + NULL + ); + + if (EFI_ERROR (Status)) { + ReleaseIdeResources (IdeBlkIoDevicePtr); + } + + gBS->OpenProtocol ( + Controller, + &gEfiPciIoProtocolGuid, + (VOID **) &PciIo, + This->DriverBindingHandle, + IdeBlkIoDevicePtr->Handle, + EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER + ); + + IdeBusDriverPrivateData->DeviceProcessed[IdeChannel * 2 + IdeDevice] = TRUE; + + // + // Report status code: device eanbled! + // + REPORT_STATUS_CODE_WITH_DEVICE_PATH ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_P_PC_ENABLE), + IdeBlkIoDevicePtr->DevicePath + ); + + // + // Create event to clear pending IDE interrupt + // + Status = gBS->CreateEventEx ( + EVT_NOTIFY_SIGNAL, + TPL_NOTIFY, + ClearInterrupt, + IdeBlkIoDevicePtr, + &gEfiEventExitBootServicesGuid, + &IdeBlkIoDevicePtr->ExitBootServiceEvent + ); + + // + // end of 2nd inner loop ---- + // + } + // + // end of 2nd outer loop ========== + // + } + + // + // All configurations done! Notify IdeController to do post initialization + // work such as saving IDE controller PCI settings for S3 resume + // + IdeInit->NotifyPhase (IdeInit, EfiIdeBusPhaseMaximum, 0); + + if (SupportedModes != NULL) { + gBS->FreePool (SupportedModes); + } + + PERF_START (NULL, "Finish IDE detection", "IDE", 1); + PERF_END (NULL, "Finish IDE detection", "IDE", 0); + + return EFI_SUCCESS; + +ErrorExit: + + // + // Report error code: controller error + // + REPORT_STATUS_CODE_WITH_DEVICE_PATH ( + EFI_ERROR_CODE | EFI_ERROR_MINOR, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_EC_CONTROLLER_ERROR), + ParentDevicePath + ); + + gBS->CloseProtocol ( + Controller, + &gEfiIdeControllerInitProtocolGuid, + This->DriverBindingHandle, + Controller + ); + + gBS->UninstallMultipleProtocolInterfaces ( + Controller, + &gEfiCallerIdGuid, + IdeBusDriverPrivateData, + NULL + ); + + if (IdeBusDriverPrivateData != NULL) { + gBS->FreePool (IdeBusDriverPrivateData); + } + + if (SupportedModes != NULL) { + gBS->FreePool (SupportedModes); + } + + gBS->CloseProtocol ( + Controller, + &gEfiPciIoProtocolGuid, + This->DriverBindingHandle, + Controller + ); + + gBS->CloseProtocol ( + Controller, + &gEfiDevicePathProtocolGuid, + This->DriverBindingHandle, + Controller + ); + + return Status; + +} +/** + Stop function of Driver Binding Protocol which is to stop the driver on Controller Handle and all + child handle attached to the controller handle if there are. + + @param This Protocol instance pointer. + @param Controller Handle of device to stop driver on + @param NumberOfChildren Not used + @param ChildHandleBuffer Not used + + @retval EFI_SUCCESS This driver is removed DeviceHandle + @retval other This driver was not removed from this device + +**/ +EFI_STATUS +EFIAPI +IDEBusDriverBindingStop ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Controller, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer + ) +{ + EFI_STATUS Status; + EFI_PCI_IO_PROTOCOL *PciIo; + BOOLEAN AllChildrenStopped; + UINTN Index; + IDE_BUS_DRIVER_PRIVATE_DATA *IdeBusDriverPrivateData; + UINT64 Supports; + + IdeBusDriverPrivateData = NULL; + + if (NumberOfChildren == 0) { + + Status = gBS->OpenProtocol ( + Controller, + &gEfiPciIoProtocolGuid, + (VOID **) &PciIo, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (!EFI_ERROR (Status)) { + Status = PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationSupported, + 0, + &Supports + ); + if (!EFI_ERROR (Status)) { + Supports &= EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO | EFI_PCI_DEVICE_ENABLE; + PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationDisable, + Supports, + NULL + ); + } + } + + gBS->OpenProtocol ( + Controller, + &gEfiCallerIdGuid, + (VOID **) &IdeBusDriverPrivateData, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + + gBS->UninstallMultipleProtocolInterfaces ( + Controller, + &gEfiCallerIdGuid, + IdeBusDriverPrivateData, + NULL + ); + + if (IdeBusDriverPrivateData != NULL) { + gBS->FreePool (IdeBusDriverPrivateData); + } + // + // Close the bus driver + // + gBS->CloseProtocol ( + Controller, + &gEfiIdeControllerInitProtocolGuid, + This->DriverBindingHandle, + Controller + ); + gBS->CloseProtocol ( + Controller, + &gEfiPciIoProtocolGuid, + This->DriverBindingHandle, + Controller + ); + gBS->CloseProtocol ( + Controller, + &gEfiDevicePathProtocolGuid, + This->DriverBindingHandle, + Controller + ); + + return EFI_SUCCESS; + } + + AllChildrenStopped = TRUE; + + for (Index = 0; Index < NumberOfChildren; Index++) { + + Status = DeRegisterIdeDevice (This, Controller, ChildHandleBuffer[Index]); + + if (EFI_ERROR (Status)) { + AllChildrenStopped = FALSE; + } + } + + if (!AllChildrenStopped) { + return EFI_DEVICE_ERROR; + } + + return EFI_SUCCESS; +} + +/** + issue ATA or ATAPI command to reset a block IO device. + @param This Block IO protocol instance pointer. + @param ExtendedVerification If FALSE,for ATAPI device, driver will only invoke ATAPI reset method + If TRUE, for ATAPI device, driver need invoke ATA reset method after + invoke ATAPI reset method + + @retval EFI_DEVICE_ERROR When the device is neighther ATA device or ATAPI device. + @retval EFI_SUCCESS The device reset successfully + +**/ +EFI_STATUS +EFIAPI +IDEBlkIoReset ( + IN EFI_BLOCK_IO_PROTOCOL *This, + IN BOOLEAN ExtendedVerification + ) +{ + IDE_BLK_IO_DEV *IdeBlkIoDevice; + EFI_STATUS Status; + EFI_TPL OldTpl; + + OldTpl = gBS->RaiseTPL (TPL_CALLBACK); + + IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This); + // + // Requery IDE IO resources in case of the switch of native and legacy modes + // + ReassignIdeResources (IdeBlkIoDevice); + + // + // for ATA device, using ATA reset method + // + if (IdeBlkIoDevice->Type == IdeHardDisk || + IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) { + Status = AtaSoftReset (IdeBlkIoDevice); + goto Done; + } + + if (IdeBlkIoDevice->Type == IdeUnknown) { + Status = EFI_DEVICE_ERROR; + goto Done; + } + + // + // for ATAPI device, using ATAPI reset method + // + Status = AtapiSoftReset (IdeBlkIoDevice); + if (ExtendedVerification) { + Status = AtaSoftReset (IdeBlkIoDevice); + } + +Done: + gBS->RestoreTPL (OldTpl); + return Status; +} + +/** + Read data from a block IO device + + @param This Block IO protocol instance pointer. + @param MediaId The media ID of the device @param Lba Starting LBA address to read data - @param BufferSize The size of data to be read - @param Buffer Caller supplied buffer to save data - - @retval EFI_DEVICE_ERROR unknown device type - @retval other read data status. - -**/ -EFI_STATUS -EFIAPI -IDEBlkIoReadBlocks ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN UINT32 MediaId, + @param BufferSize The size of data to be read + @param Buffer Caller supplied buffer to save data + + @retval EFI_DEVICE_ERROR unknown device type + @retval other read data status. + +**/ +EFI_STATUS +EFIAPI +IDEBlkIoReadBlocks ( + IN EFI_BLOCK_IO_PROTOCOL *This, + IN UINT32 MediaId, IN EFI_LBA Lba, - IN UINTN BufferSize, - OUT VOID *Buffer - ) -{ - IDE_BLK_IO_DEV *IdeBlkIoDevice; - EFI_STATUS Status; - EFI_TPL OldTpl; - - OldTpl = gBS->RaiseTPL (TPL_CALLBACK); - - IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This); - - // - // Requery IDE IO resources in case of the switch of native and legacy modes - // - ReassignIdeResources (IdeBlkIoDevice); - - // - // For ATA compatible device, use ATA read block's mechanism - // - if (IdeBlkIoDevice->Type == IdeHardDisk || - IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) { - Status = AtaBlkIoReadBlocks ( - IdeBlkIoDevice, - MediaId, + IN UINTN BufferSize, + OUT VOID *Buffer + ) +{ + IDE_BLK_IO_DEV *IdeBlkIoDevice; + EFI_STATUS Status; + EFI_TPL OldTpl; + + OldTpl = gBS->RaiseTPL (TPL_CALLBACK); + + IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This); + + // + // Requery IDE IO resources in case of the switch of native and legacy modes + // + ReassignIdeResources (IdeBlkIoDevice); + + // + // For ATA compatible device, use ATA read block's mechanism + // + if (IdeBlkIoDevice->Type == IdeHardDisk || + IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) { + Status = AtaBlkIoReadBlocks ( + IdeBlkIoDevice, + MediaId, Lba, - BufferSize, - Buffer - ); - goto Done; - } - - if (IdeBlkIoDevice->Type == IdeUnknown) { - Status = EFI_DEVICE_ERROR; - goto Done; - } - - // - // for ATAPI device, using ATAPI read block's mechanism - // - Status = AtapiBlkIoReadBlocks ( - IdeBlkIoDevice, - MediaId, + BufferSize, + Buffer + ); + goto Done; + } + + if (IdeBlkIoDevice->Type == IdeUnknown) { + Status = EFI_DEVICE_ERROR; + goto Done; + } + + // + // for ATAPI device, using ATAPI read block's mechanism + // + Status = AtapiBlkIoReadBlocks ( + IdeBlkIoDevice, + MediaId, Lba, - BufferSize, - Buffer - ); - -Done: - gBS->RestoreTPL (OldTpl); - - return Status; -} - -/** + BufferSize, + Buffer + ); + +Done: + gBS->RestoreTPL (OldTpl); + + return Status; +} + +/** Write data to block io device. - - @param This Protocol instance pointer. - @param MediaId The media ID of the device + + @param This Protocol instance pointer. + @param MediaId The media ID of the device @param Lba Starting LBA address to write data - @param BufferSize The size of data to be written - @param Buffer Caller supplied buffer to save data - - @retval EFI_DEVICE_ERROR unknown device type - @retval other write data status - -**/ -EFI_STATUS -EFIAPI -IDEBlkIoWriteBlocks ( - IN EFI_BLOCK_IO_PROTOCOL *This, - IN UINT32 MediaId, + @param BufferSize The size of data to be written + @param Buffer Caller supplied buffer to save data + + @retval EFI_DEVICE_ERROR unknown device type + @retval other write data status + +**/ +EFI_STATUS +EFIAPI +IDEBlkIoWriteBlocks ( + IN EFI_BLOCK_IO_PROTOCOL *This, + IN UINT32 MediaId, IN EFI_LBA Lba, - IN UINTN BufferSize, - IN VOID *Buffer - ) -{ - IDE_BLK_IO_DEV *IdeBlkIoDevice; - EFI_STATUS Status; - EFI_TPL OldTpl; - - OldTpl = gBS->RaiseTPL (TPL_CALLBACK); - - IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This); - // - // Requery IDE IO resources in case of the switch of native and legacy modes - // - ReassignIdeResources (IdeBlkIoDevice); - - // - // for ATA device, using ATA write block's mechanism - // - if (IdeBlkIoDevice->Type == IdeHardDisk || - IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) { - - Status = AtaBlkIoWriteBlocks ( - IdeBlkIoDevice, - MediaId, + IN UINTN BufferSize, + IN VOID *Buffer + ) +{ + IDE_BLK_IO_DEV *IdeBlkIoDevice; + EFI_STATUS Status; + EFI_TPL OldTpl; + + OldTpl = gBS->RaiseTPL (TPL_CALLBACK); + + IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This); + // + // Requery IDE IO resources in case of the switch of native and legacy modes + // + ReassignIdeResources (IdeBlkIoDevice); + + // + // for ATA device, using ATA write block's mechanism + // + if (IdeBlkIoDevice->Type == IdeHardDisk || + IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) { + + Status = AtaBlkIoWriteBlocks ( + IdeBlkIoDevice, + MediaId, Lba, - BufferSize, - Buffer - ); - goto Done; - } - - if (IdeBlkIoDevice->Type == IdeUnknown) { - Status = EFI_DEVICE_ERROR; - goto Done; - } - - // - // for ATAPI device, using ATAPI write block's mechanism - // - Status = AtapiBlkIoWriteBlocks ( - IdeBlkIoDevice, - MediaId, + BufferSize, + Buffer + ); + goto Done; + } + + if (IdeBlkIoDevice->Type == IdeUnknown) { + Status = EFI_DEVICE_ERROR; + goto Done; + } + + // + // for ATAPI device, using ATAPI write block's mechanism + // + Status = AtapiBlkIoWriteBlocks ( + IdeBlkIoDevice, + MediaId, Lba, - BufferSize, - Buffer - ); - -Done: - gBS->RestoreTPL (OldTpl); - return Status; -} -/** - Flushes all modified data to a physical block devices - - @param This Indicates a pointer to the calling context which to sepcify a - sepcific block device - - @retval EFI_SUCCESS Always return success. -**/ -EFI_STATUS -EFIAPI -IDEBlkIoFlushBlocks ( - IN EFI_BLOCK_IO_PROTOCOL *This - ) -{ - // - // return directly - // - return EFI_SUCCESS; -} - -/** + BufferSize, + Buffer + ); + +Done: + gBS->RestoreTPL (OldTpl); + return Status; +} +/** + Flushes all modified data to a physical block devices + + @param This Indicates a pointer to the calling context which to sepcify a + sepcific block device + + @retval EFI_SUCCESS Always return success. +**/ +EFI_STATUS +EFIAPI +IDEBlkIoFlushBlocks ( + IN EFI_BLOCK_IO_PROTOCOL *This + ) +{ + // + // return directly + // + return EFI_SUCCESS; +} + +/** This function is used by the IDE bus driver to get inquiry data. Data format of Identify data is defined by the Interface GUID. - + @param This Pointer to the EFI_DISK_INFO_PROTOCOL instance. @param InquiryData Pointer to a buffer for the inquiry data. @param InquiryDataSize Pointer to the value for the inquiry data size. - + @retval EFI_SUCCESS The command was accepted without any errors. @retval EFI_NOT_FOUND Device does not support this data class @retval EFI_DEVICE_ERROR Error reading InquiryData from device @retval EFI_BUFFER_TOO_SMALL IntquiryDataSize not big enough - -**/ -EFI_STATUS -EFIAPI -IDEDiskInfoInquiry ( - IN EFI_DISK_INFO_PROTOCOL *This, - IN OUT VOID *InquiryData, - IN OUT UINT32 *InquiryDataSize - ) -{ - IDE_BLK_IO_DEV *IdeBlkIoDevice; - - IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_DISK_INFO_THIS (This); - - if (*InquiryDataSize < sizeof (ATAPI_INQUIRY_DATA)) { - *InquiryDataSize = sizeof (ATAPI_INQUIRY_DATA); - return EFI_BUFFER_TOO_SMALL; - } - - if (IdeBlkIoDevice->InquiryData == NULL) { - return EFI_NOT_FOUND; - } - - gBS->CopyMem (InquiryData, IdeBlkIoDevice->InquiryData, sizeof (ATAPI_INQUIRY_DATA)); - *InquiryDataSize = sizeof (ATAPI_INQUIRY_DATA); - - return EFI_SUCCESS; -} - -/** + +**/ +EFI_STATUS +EFIAPI +IDEDiskInfoInquiry ( + IN EFI_DISK_INFO_PROTOCOL *This, + IN OUT VOID *InquiryData, + IN OUT UINT32 *InquiryDataSize + ) +{ + IDE_BLK_IO_DEV *IdeBlkIoDevice; + + IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_DISK_INFO_THIS (This); + + if (*InquiryDataSize < sizeof (ATAPI_INQUIRY_DATA)) { + *InquiryDataSize = sizeof (ATAPI_INQUIRY_DATA); + return EFI_BUFFER_TOO_SMALL; + } + + if (IdeBlkIoDevice->InquiryData == NULL) { + return EFI_NOT_FOUND; + } + + gBS->CopyMem (InquiryData, IdeBlkIoDevice->InquiryData, sizeof (ATAPI_INQUIRY_DATA)); + *InquiryDataSize = sizeof (ATAPI_INQUIRY_DATA); + + return EFI_SUCCESS; +} + +/** This function is used by the IDE bus driver to get identify data. - Data format of Identify data is defined by the Interface GUID. - + Data format of Identify data is defined by the Interface GUID. + @param This Pointer to the EFI_DISK_INFO_PROTOCOL instance. @param IdentifyData Pointer to a buffer for the identify data. @param IdentifyDataSize Pointer to the value for the identify data size. - + @retval EFI_SUCCESS The command was accepted without any errors. @retval EFI_NOT_FOUND Device does not support this data class @retval EFI_DEVICE_ERROR Error reading IdentifyData from device @retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough - -**/ -EFI_STATUS -EFIAPI -IDEDiskInfoIdentify ( - IN EFI_DISK_INFO_PROTOCOL *This, - IN OUT VOID *IdentifyData, - IN OUT UINT32 *IdentifyDataSize - ) -{ - IDE_BLK_IO_DEV *IdeBlkIoDevice; - - IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_DISK_INFO_THIS (This); - - if (*IdentifyDataSize < sizeof (EFI_IDENTIFY_DATA)) { - *IdentifyDataSize = sizeof (EFI_IDENTIFY_DATA); - return EFI_BUFFER_TOO_SMALL; - } - - if (IdeBlkIoDevice->IdData == NULL) { - return EFI_NOT_FOUND; - } - - gBS->CopyMem (IdentifyData, IdeBlkIoDevice->IdData, sizeof (EFI_IDENTIFY_DATA)); - *IdentifyDataSize = sizeof (EFI_IDENTIFY_DATA); - - return EFI_SUCCESS; -} - -/** + +**/ +EFI_STATUS +EFIAPI +IDEDiskInfoIdentify ( + IN EFI_DISK_INFO_PROTOCOL *This, + IN OUT VOID *IdentifyData, + IN OUT UINT32 *IdentifyDataSize + ) +{ + IDE_BLK_IO_DEV *IdeBlkIoDevice; + + IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_DISK_INFO_THIS (This); + + if (*IdentifyDataSize < sizeof (EFI_IDENTIFY_DATA)) { + *IdentifyDataSize = sizeof (EFI_IDENTIFY_DATA); + return EFI_BUFFER_TOO_SMALL; + } + + if (IdeBlkIoDevice->IdData == NULL) { + return EFI_NOT_FOUND; + } + + gBS->CopyMem (IdentifyData, IdeBlkIoDevice->IdData, sizeof (EFI_IDENTIFY_DATA)); + *IdentifyDataSize = sizeof (EFI_IDENTIFY_DATA); + + return EFI_SUCCESS; +} + +/** This function is used by the IDE bus driver to get sense data. - Data format of Sense data is defined by the Interface GUID. - + Data format of Sense data is defined by the Interface GUID. + @param This Pointer to the EFI_DISK_INFO_PROTOCOL instance. @param SenseData Pointer to the SenseData. @param SenseDataSize Size of SenseData in bytes. @param SenseDataNumber Pointer to the value for the identify data size. - + @retval EFI_SUCCESS The command was accepted without any errors. @retval EFI_NOT_FOUND Device does not support this data class @retval EFI_DEVICE_ERROR Error reading InquiryData from device @retval EFI_BUFFER_TOO_SMALL SenseDataSize not big enough - -**/ -EFI_STATUS -EFIAPI -IDEDiskInfoSenseData ( - IN EFI_DISK_INFO_PROTOCOL *This, - IN OUT VOID *SenseData, - IN OUT UINT32 *SenseDataSize, - OUT UINT8 *SenseDataNumber - ) -{ - return EFI_NOT_FOUND; -} - -/** + +**/ +EFI_STATUS +EFIAPI +IDEDiskInfoSenseData ( + IN EFI_DISK_INFO_PROTOCOL *This, + IN OUT VOID *SenseData, + IN OUT UINT32 *SenseDataSize, + OUT UINT8 *SenseDataNumber + ) +{ + return EFI_NOT_FOUND; +} + +/** This function is used by the IDE bus driver to get controller information. - + @param This Pointer to the EFI_DISK_INFO_PROTOCOL instance. @param IdeChannel Pointer to the Ide Channel number. Primary or secondary. @param IdeDevice Pointer to the Ide Device number. Master or slave. - + @retval EFI_SUCCESS IdeChannel and IdeDevice are valid @retval EFI_UNSUPPORTED This is not an IDE device - -**/ -EFI_STATUS -EFIAPI -IDEDiskInfoWhichIde ( - IN EFI_DISK_INFO_PROTOCOL *This, - OUT UINT32 *IdeChannel, - OUT UINT32 *IdeDevice - ) -{ - IDE_BLK_IO_DEV *IdeBlkIoDevice; - - IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_DISK_INFO_THIS (This); - *IdeChannel = IdeBlkIoDevice->Channel; - *IdeDevice = IdeBlkIoDevice->Device; - - return EFI_SUCCESS; -} - -/** - The is an event(generally the event is exitBootService event) call back function. - Clear pending IDE interrupt before OS loader/kernel take control of the IDE device. - - @param Event Pointer to this event - @param Context Event hanlder private data - -**/ -VOID -EFIAPI -ClearInterrupt ( - IN EFI_EVENT Event, - IN VOID *Context - ) -{ - EFI_STATUS Status; - UINT64 IoPortForBmis; - UINT8 RegisterValue; - IDE_BLK_IO_DEV *IdeDev; - - // - // Get our context - // - IdeDev = (IDE_BLK_IO_DEV *) Context; - - // - // Obtain IDE IO port registers' base addresses - // - Status = ReassignIdeResources (IdeDev); - if (EFI_ERROR (Status)) { - return; - } - - // - // Check whether interrupt is pending - // - - // - // Reset IDE device to force it de-assert interrupt pin - // Note: this will reset all devices on this IDE channel - // - AtaSoftReset (IdeDev); - if (EFI_ERROR (Status)) { - return; - } - - // - // Get base address of IDE Bus Master Status Regsiter - // - if (IdePrimary == IdeDev->Channel) { - IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISP_OFFSET; - } else { - if (IdeSecondary == IdeDev->Channel) { - IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISS_OFFSET; - } else { - return; - } - } - // - // Read BMIS register and clear ERROR and INTR bit - // - IdeDev->PciIo->Io.Read ( - IdeDev->PciIo, - EfiPciIoWidthUint8, - EFI_PCI_IO_PASS_THROUGH_BAR, - IoPortForBmis, - 1, - &RegisterValue - ); - - RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR); - - IdeDev->PciIo->Io.Write ( - IdeDev->PciIo, - EfiPciIoWidthUint8, - EFI_PCI_IO_PASS_THROUGH_BAR, - IoPortForBmis, - 1, - &RegisterValue - ); - - // - // Select the other device on this channel to ensure this device to release the interrupt pin - // - if (IdeDev->Device == 0) { - RegisterValue = (1 << 4) | 0xe0; - } else { - RegisterValue = (0 << 4) | 0xe0; - } - IDEWritePortB ( - IdeDev->PciIo, - IdeDev->IoPort->Head, - RegisterValue - ); - -} - -/** - The user Entry Point for module IdeBus. The user code starts with this function. - - @param[in] ImageHandle The firmware allocated handle for the EFI image. - @param[in] SystemTable A pointer to the EFI System Table. - - @retval EFI_SUCCESS The entry point is executed successfully. - @retval other Some error occurs when executing this entry point. - -**/ -EFI_STATUS -EFIAPI -InitializeIdeBus( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - - // - // Install driver model protocol(s). - // - Status = EfiLibInstallAllDriverProtocols2 ( - ImageHandle, - SystemTable, - &gIDEBusDriverBinding, - ImageHandle, - &gIDEBusComponentName, - &gIDEBusComponentName2, - NULL, - NULL, - &gIDEBusDriverDiagnostics, - &gIDEBusDriverDiagnostics2 - ); - ASSERT_EFI_ERROR (Status); - - return Status; -} + +**/ +EFI_STATUS +EFIAPI +IDEDiskInfoWhichIde ( + IN EFI_DISK_INFO_PROTOCOL *This, + OUT UINT32 *IdeChannel, + OUT UINT32 *IdeDevice + ) +{ + IDE_BLK_IO_DEV *IdeBlkIoDevice; + + IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_DISK_INFO_THIS (This); + *IdeChannel = IdeBlkIoDevice->Channel; + *IdeDevice = IdeBlkIoDevice->Device; + + return EFI_SUCCESS; +} + +/** + The is an event(generally the event is exitBootService event) call back function. + Clear pending IDE interrupt before OS loader/kernel take control of the IDE device. + + @param Event Pointer to this event + @param Context Event hanlder private data + +**/ +VOID +EFIAPI +ClearInterrupt ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + EFI_STATUS Status; + UINT64 IoPortForBmis; + UINT8 RegisterValue; + IDE_BLK_IO_DEV *IdeDev; + + // + // Get our context + // + IdeDev = (IDE_BLK_IO_DEV *) Context; + + // + // Obtain IDE IO port registers' base addresses + // + Status = ReassignIdeResources (IdeDev); + if (EFI_ERROR (Status)) { + return; + } + + // + // Check whether interrupt is pending + // + + // + // Reset IDE device to force it de-assert interrupt pin + // Note: this will reset all devices on this IDE channel + // + AtaSoftReset (IdeDev); + if (EFI_ERROR (Status)) { + return; + } + + // + // Get base address of IDE Bus Master Status Regsiter + // + if (IdePrimary == IdeDev->Channel) { + IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISP_OFFSET; + } else { + if (IdeSecondary == IdeDev->Channel) { + IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISS_OFFSET; + } else { + return; + } + } + // + // Read BMIS register and clear ERROR and INTR bit + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + + RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + + // + // Select the other device on this channel to ensure this device to release the interrupt pin + // + if (IdeDev->Device == 0) { + RegisterValue = (1 << 4) | 0xe0; + } else { + RegisterValue = (0 << 4) | 0xe0; + } + IDEWritePortB ( + IdeDev->PciIo, + IdeDev->IoPort->Head, + RegisterValue + ); + +} + +/** + The user Entry Point for module IdeBus. The user code starts with this function. + + @param[in] ImageHandle The firmware allocated handle for the EFI image. + @param[in] SystemTable A pointer to the EFI System Table. + + @retval EFI_SUCCESS The entry point is executed successfully. + @retval other Some error occurs when executing this entry point. + +**/ +EFI_STATUS +EFIAPI +InitializeIdeBus( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + + // + // Install driver model protocol(s). + // + Status = EfiLibInstallAllDriverProtocols2 ( + ImageHandle, + SystemTable, + &gIDEBusDriverBinding, + ImageHandle, + &gIDEBusComponentName, + &gIDEBusComponentName2, + NULL, + NULL, + &gIDEBusDriverDiagnostics, + &gIDEBusDriverDiagnostics2 + ); + ASSERT_EFI_ERROR (Status); + + return Status; +}