StandaloneMmPkg/Core: Implementation of Standalone MM Core Module.

Management Mode (MM) is a generic term used to describe a secure
execution environment provided by the CPU and related silicon that is
entered when the CPU detects a MMI. For x86 systems, this can be
implemented with System Management Mode (SMM). For ARM systems, this can
be implemented with TrustZone (TZ).
A MMI can be a CPU instruction or interrupt. Upon detection of a MMI, a
CPU will jump to the MM Entry Point and save some portion of its state
(the "save state") such that execution can be resumed.
The MMI can be generated synchronously by software or asynchronously by
a hardware event. Each MMI source can be detected, cleared and disabled.
Some systems provide for special memory (Management Mode RAM or MMRAM)
which is set aside for software running in MM. Usually the MMRAM is
hidden during normal CPU execution, but this is not required. Usually,
after MMRAM is hidden it cannot be exposed until the next system reset.

The MM Core Interface Specification describes three pieces of the PI
Management Mode architecture:
1. MM Dispatch
   During DXE, the DXE Foundation works with the MM Foundation to
   schedule MM drivers for execution in the discovered firmware volumes.
2. MM Initialization
   MM related code opens MMRAM, creates the MMRAM memory map, and
   launches the MM Foundation, which provides the necessary services to
   launch MM-related drivers. Then, sometime before boot, MMRAM is
   closed and locked. This piece may be completed during the
   SEC, PEI or DXE phases.
3. MMI Management
   When an MMI generated, the MM environment is created and then the MMI

   sources are detected and MMI handlers called.

This patch implements the MM Core.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This commit is contained in:
Supreeth Venkatesh 2018-07-13 23:05:27 +08:00 committed by Jiewen Yao
parent 0f4db639bb
commit 6b46d77243
17 changed files with 5925 additions and 0 deletions

View File

@ -0,0 +1,389 @@
/** @file
MM Driver Dispatcher Dependency Evaluator
This routine evaluates a dependency expression (DEPENDENCY_EXPRESSION) to determine
if a driver can be scheduled for execution. The criteria for
schedulability is that the dependency expression is satisfied.
Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "StandaloneMmCore.h"
///
/// EFI_DEP_REPLACE_TRUE - Used to dynamically patch the dependency expression
/// to save time. A EFI_DEP_PUSH is evaluated one an
/// replaced with EFI_DEP_REPLACE_TRUE. If PI spec's Vol 2
/// Driver Execution Environment Core Interface use 0xff
/// as new DEPEX opcode. EFI_DEP_REPLACE_TRUE should be
/// defined to a new value that is not conflicting with PI spec.
///
#define EFI_DEP_REPLACE_TRUE 0xff
///
/// Define the initial size of the dependency expression evaluation stack
///
#define DEPEX_STACK_SIZE_INCREMENT 0x1000
//
// Global stack used to evaluate dependency expressions
//
BOOLEAN *mDepexEvaluationStack = NULL;
BOOLEAN *mDepexEvaluationStackEnd = NULL;
BOOLEAN *mDepexEvaluationStackPointer = NULL;
/**
Grow size of the Depex stack
@retval EFI_SUCCESS Stack successfully growed.
@retval EFI_OUT_OF_RESOURCES There is not enough system memory to grow the stack.
**/
EFI_STATUS
GrowDepexStack (
VOID
)
{
BOOLEAN *NewStack;
UINTN Size;
Size = DEPEX_STACK_SIZE_INCREMENT;
if (mDepexEvaluationStack != NULL) {
Size = Size + (mDepexEvaluationStackEnd - mDepexEvaluationStack);
}
NewStack = AllocatePool (Size * sizeof (BOOLEAN));
if (NewStack == NULL) {
return EFI_OUT_OF_RESOURCES;
}
if (mDepexEvaluationStack != NULL) {
//
// Copy to Old Stack to the New Stack
//
CopyMem (
NewStack,
mDepexEvaluationStack,
(mDepexEvaluationStackEnd - mDepexEvaluationStack) * sizeof (BOOLEAN)
);
//
// Free The Old Stack
//
FreePool (mDepexEvaluationStack);
}
//
// Make the Stack pointer point to the old data in the new stack
//
mDepexEvaluationStackPointer = NewStack + (mDepexEvaluationStackPointer - mDepexEvaluationStack);
mDepexEvaluationStack = NewStack;
mDepexEvaluationStackEnd = NewStack + Size;
return EFI_SUCCESS;
}
/**
Push an element onto the Boolean Stack.
@param Value BOOLEAN to push.
@retval EFI_SUCCESS The value was pushed onto the stack.
@retval EFI_OUT_OF_RESOURCES There is not enough system memory to grow the stack.
**/
EFI_STATUS
PushBool (
IN BOOLEAN Value
)
{
EFI_STATUS Status;
//
// Check for a stack overflow condition
//
if (mDepexEvaluationStackPointer == mDepexEvaluationStackEnd) {
//
// Grow the stack
//
Status = GrowDepexStack ();
if (EFI_ERROR (Status)) {
return Status;
}
}
//
// Push the item onto the stack
//
*mDepexEvaluationStackPointer = Value;
mDepexEvaluationStackPointer++;
return EFI_SUCCESS;
}
/**
Pop an element from the Boolean stack.
@param Value BOOLEAN to pop.
@retval EFI_SUCCESS The value was popped onto the stack.
@retval EFI_ACCESS_DENIED The pop operation underflowed the stack.
**/
EFI_STATUS
PopBool (
OUT BOOLEAN *Value
)
{
//
// Check for a stack underflow condition
//
if (mDepexEvaluationStackPointer == mDepexEvaluationStack) {
return EFI_ACCESS_DENIED;
}
//
// Pop the item off the stack
//
mDepexEvaluationStackPointer--;
*Value = *mDepexEvaluationStackPointer;
return EFI_SUCCESS;
}
/**
This is the POSTFIX version of the dependency evaluator. This code does
not need to handle Before or After, as it is not valid to call this
routine in this case. POSTFIX means all the math is done on top of the stack.
@param DriverEntry DriverEntry element to update.
@retval TRUE If driver is ready to run.
@retval FALSE If driver is not ready to run or some fatal error
was found.
**/
BOOLEAN
MmIsSchedulable (
IN EFI_MM_DRIVER_ENTRY *DriverEntry
)
{
EFI_STATUS Status;
UINT8 *Iterator;
BOOLEAN Operator;
BOOLEAN Operator2;
EFI_GUID DriverGuid;
VOID *Interface;
Operator = FALSE;
Operator2 = FALSE;
if (DriverEntry->After || DriverEntry->Before) {
//
// If Before or After Depex skip as MmInsertOnScheduledQueueWhileProcessingBeforeAndAfter ()
// processes them.
//
return FALSE;
}
DEBUG ((DEBUG_DISPATCH, "Evaluate MM DEPEX for FFS(%g)\n", &DriverEntry->FileName));
if (DriverEntry->Depex == NULL) {
//
// A NULL Depex means that the MM driver is not built correctly.
// All MM drivers must have a valid depex expressiion.
//
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Depex is empty)\n"));
ASSERT (FALSE);
return FALSE;
}
//
// Clean out memory leaks in Depex Boolean stack. Leaks are only caused by
// incorrectly formed DEPEX expressions
//
mDepexEvaluationStackPointer = mDepexEvaluationStack;
Iterator = DriverEntry->Depex;
while (TRUE) {
//
// Check to see if we are attempting to fetch dependency expression instructions
// past the end of the dependency expression.
//
if (((UINTN)Iterator - (UINTN)DriverEntry->Depex) >= DriverEntry->DepexSize) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Attempt to fetch past end of depex)\n"));
return FALSE;
}
//
// Look at the opcode of the dependency expression instruction.
//
switch (*Iterator) {
case EFI_DEP_BEFORE:
case EFI_DEP_AFTER:
//
// For a well-formed Dependency Expression, the code should never get here.
// The BEFORE and AFTER are processed prior to this routine's invocation.
// If the code flow arrives at this point, there was a BEFORE or AFTER
// that were not the first opcodes.
//
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected BEFORE or AFTER opcode)\n"));
ASSERT (FALSE);
case EFI_DEP_PUSH:
//
// Push operator is followed by a GUID. Test to see if the GUID protocol
// is installed and push the boolean result on the stack.
//
CopyMem (&DriverGuid, Iterator + 1, sizeof (EFI_GUID));
Status = MmLocateProtocol (&DriverGuid, NULL, &Interface);
if (EFI_ERROR (Status) && (mEfiSystemTable != NULL)) {
//
// For MM Driver, it may depend on uefi protocols
//
Status = mEfiSystemTable->BootServices->LocateProtocol (&DriverGuid, NULL, &Interface);
}
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " PUSH GUID(%g) = FALSE\n", &DriverGuid));
Status = PushBool (FALSE);
} else {
DEBUG ((DEBUG_DISPATCH, " PUSH GUID(%g) = TRUE\n", &DriverGuid));
*Iterator = EFI_DEP_REPLACE_TRUE;
Status = PushBool (TRUE);
}
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
Iterator += sizeof (EFI_GUID);
break;
case EFI_DEP_AND:
DEBUG ((DEBUG_DISPATCH, " AND\n"));
Status = PopBool (&Operator);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
Status = PopBool (&Operator2);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
Status = PushBool ((BOOLEAN)(Operator && Operator2));
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
break;
case EFI_DEP_OR:
DEBUG ((DEBUG_DISPATCH, " OR\n"));
Status = PopBool (&Operator);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
Status = PopBool (&Operator2);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
Status = PushBool ((BOOLEAN)(Operator || Operator2));
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
break;
case EFI_DEP_NOT:
DEBUG ((DEBUG_DISPATCH, " NOT\n"));
Status = PopBool (&Operator);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
Status = PushBool ((BOOLEAN)(!Operator));
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
break;
case EFI_DEP_TRUE:
DEBUG ((DEBUG_DISPATCH, " TRUE\n"));
Status = PushBool (TRUE);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
break;
case EFI_DEP_FALSE:
DEBUG ((DEBUG_DISPATCH, " FALSE\n"));
Status = PushBool (FALSE);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
break;
case EFI_DEP_END:
DEBUG ((DEBUG_DISPATCH, " END\n"));
Status = PopBool (&Operator);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
DEBUG ((DEBUG_DISPATCH, " RESULT = %a\n", Operator ? "TRUE" : "FALSE"));
return Operator;
case EFI_DEP_REPLACE_TRUE:
CopyMem (&DriverGuid, Iterator + 1, sizeof (EFI_GUID));
DEBUG ((DEBUG_DISPATCH, " PUSH GUID(%g) = TRUE\n", &DriverGuid));
Status = PushBool (TRUE);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
return FALSE;
}
Iterator += sizeof (EFI_GUID);
break;
default:
DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unknown opcode)\n"));
goto Done;
}
//
// Skip over the Dependency Op Code we just processed in the switch.
// The math is done out of order, but it should not matter. That is
// we may add in the sizeof (EFI_GUID) before we account for the OP Code.
// This is not an issue, since we just need the correct end result. You
// need to be careful using Iterator in the loop as it's intermediate value
// may be strange.
//
Iterator++;
}
Done:
return FALSE;
}

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,104 @@
/**@file
Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "StandaloneMmCore.h"
#include <Library/FvLib.h>
//
// List of file types supported by dispatcher
//
EFI_FV_FILETYPE mMmFileTypes[] = {
EFI_FV_FILETYPE_MM,
0xE, //EFI_FV_FILETYPE_MM_STANDALONE,
//
// Note: DXE core will process the FV image file, so skip it in MM core
// EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE
//
};
EFI_STATUS
MmAddToDriverList (
IN EFI_HANDLE FvHandle,
IN VOID *Pe32Data,
IN UINTN Pe32DataSize,
IN VOID *Depex,
IN UINTN DepexSize,
IN EFI_GUID *DriverName
);
BOOLEAN
FvHasBeenProcessed (
IN EFI_HANDLE FvHandle
);
VOID
FvIsBeingProcesssed (
IN EFI_HANDLE FvHandle
);
EFI_STATUS
MmCoreFfsFindMmDriver (
IN EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader
)
/*++
Routine Description:
Given the pointer to the Firmware Volume Header find the
MM driver and return it's PE32 image.
Arguments:
FwVolHeader - Pointer to memory mapped FV
Returns:
other - Failure
--*/
{
EFI_STATUS Status;
EFI_STATUS DepexStatus;
EFI_FFS_FILE_HEADER *FileHeader;
EFI_FV_FILETYPE FileType;
VOID *Pe32Data;
UINTN Pe32DataSize;
VOID *Depex;
UINTN DepexSize;
UINTN Index;
DEBUG ((DEBUG_INFO, "MmCoreFfsFindMmDriver - 0x%x\n", FwVolHeader));
if (FvHasBeenProcessed (FwVolHeader)) {
return EFI_SUCCESS;
}
FvIsBeingProcesssed (FwVolHeader);
for (Index = 0; Index < sizeof (mMmFileTypes) / sizeof (mMmFileTypes[0]); Index++) {
DEBUG ((DEBUG_INFO, "Check MmFileTypes - 0x%x\n", mMmFileTypes[Index]));
FileType = mMmFileTypes[Index];
FileHeader = NULL;
do {
Status = FfsFindNextFile (FileType, FwVolHeader, &FileHeader);
if (!EFI_ERROR (Status)) {
Status = FfsFindSectionData (EFI_SECTION_PE32, FileHeader, &Pe32Data, &Pe32DataSize);
DEBUG ((DEBUG_INFO, "Find PE data - 0x%x\n", Pe32Data));
DepexStatus = FfsFindSectionData (EFI_SECTION_MM_DEPEX, FileHeader, &Depex, &DepexSize);
if (!EFI_ERROR (DepexStatus)) {
MmAddToDriverList (FwVolHeader, Pe32Data, Pe32DataSize, Depex, DepexSize, &FileHeader->Name);
}
}
} while (!EFI_ERROR (Status));
}
return Status;
}

View File

@ -0,0 +1,533 @@
/** @file
SMM handle & protocol handling.
Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "StandaloneMmCore.h"
//
// mProtocolDatabase - A list of all protocols in the system. (simple list for now)
// gHandleList - A list of all the handles in the system
//
LIST_ENTRY mProtocolDatabase = INITIALIZE_LIST_HEAD_VARIABLE (mProtocolDatabase);
LIST_ENTRY gHandleList = INITIALIZE_LIST_HEAD_VARIABLE (gHandleList);
/**
Check whether a handle is a valid EFI_HANDLE
@param UserHandle The handle to check
@retval EFI_INVALID_PARAMETER The handle is NULL or not a valid EFI_HANDLE.
@retval EFI_SUCCESS The handle is valid EFI_HANDLE.
**/
EFI_STATUS
MmValidateHandle (
IN EFI_HANDLE UserHandle
)
{
IHANDLE *Handle;
Handle = (IHANDLE *)UserHandle;
if (Handle == NULL) {
return EFI_INVALID_PARAMETER;
}
if (Handle->Signature != EFI_HANDLE_SIGNATURE) {
return EFI_INVALID_PARAMETER;
}
return EFI_SUCCESS;
}
/**
Finds the protocol entry for the requested protocol.
@param Protocol The ID of the protocol
@param Create Create a new entry if not found
@return Protocol entry
**/
PROTOCOL_ENTRY *
MmFindProtocolEntry (
IN EFI_GUID *Protocol,
IN BOOLEAN Create
)
{
LIST_ENTRY *Link;
PROTOCOL_ENTRY *Item;
PROTOCOL_ENTRY *ProtEntry;
//
// Search the database for the matching GUID
//
ProtEntry = NULL;
for (Link = mProtocolDatabase.ForwardLink;
Link != &mProtocolDatabase;
Link = Link->ForwardLink) {
Item = CR (Link, PROTOCOL_ENTRY, AllEntries, PROTOCOL_ENTRY_SIGNATURE);
if (CompareGuid (&Item->ProtocolID, Protocol)) {
//
// This is the protocol entry
//
ProtEntry = Item;
break;
}
}
//
// If the protocol entry was not found and Create is TRUE, then
// allocate a new entry
//
if ((ProtEntry == NULL) && Create) {
ProtEntry = AllocatePool (sizeof(PROTOCOL_ENTRY));
if (ProtEntry != NULL) {
//
// Initialize new protocol entry structure
//
ProtEntry->Signature = PROTOCOL_ENTRY_SIGNATURE;
CopyGuid ((VOID *)&ProtEntry->ProtocolID, Protocol);
InitializeListHead (&ProtEntry->Protocols);
InitializeListHead (&ProtEntry->Notify);
//
// Add it to protocol database
//
InsertTailList (&mProtocolDatabase, &ProtEntry->AllEntries);
}
}
return ProtEntry;
}
/**
Finds the protocol instance for the requested handle and protocol.
Note: This function doesn't do parameters checking, it's caller's responsibility
to pass in valid parameters.
@param Handle The handle to search the protocol on
@param Protocol GUID of the protocol
@param Interface The interface for the protocol being searched
@return Protocol instance (NULL: Not found)
**/
PROTOCOL_INTERFACE *
MmFindProtocolInterface (
IN IHANDLE *Handle,
IN EFI_GUID *Protocol,
IN VOID *Interface
)
{
PROTOCOL_INTERFACE *Prot;
PROTOCOL_ENTRY *ProtEntry;
LIST_ENTRY *Link;
Prot = NULL;
//
// Lookup the protocol entry for this protocol ID
//
ProtEntry = MmFindProtocolEntry (Protocol, FALSE);
if (ProtEntry != NULL) {
//
// Look at each protocol interface for any matches
//
for (Link = Handle->Protocols.ForwardLink; Link != &Handle->Protocols; Link=Link->ForwardLink) {
//
// If this protocol interface matches, remove it
//
Prot = CR (Link, PROTOCOL_INTERFACE, Link, PROTOCOL_INTERFACE_SIGNATURE);
if (Prot->Interface == Interface && Prot->Protocol == ProtEntry) {
break;
}
Prot = NULL;
}
}
return Prot;
}
/**
Wrapper function to MmInstallProtocolInterfaceNotify. This is the public API which
Calls the private one which contains a BOOLEAN parameter for notifications
@param UserHandle The handle to install the protocol handler on,
or NULL if a new handle is to be allocated
@param Protocol The protocol to add to the handle
@param InterfaceType Indicates whether Interface is supplied in
native form.
@param Interface The interface for the protocol being added
@return Status code
**/
EFI_STATUS
EFIAPI
MmInstallProtocolInterface (
IN OUT EFI_HANDLE *UserHandle,
IN EFI_GUID *Protocol,
IN EFI_INTERFACE_TYPE InterfaceType,
IN VOID *Interface
)
{
return MmInstallProtocolInterfaceNotify (
UserHandle,
Protocol,
InterfaceType,
Interface,
TRUE
);
}
/**
Installs a protocol interface into the boot services environment.
@param UserHandle The handle to install the protocol handler on,
or NULL if a new handle is to be allocated
@param Protocol The protocol to add to the handle
@param InterfaceType Indicates whether Interface is supplied in
native form.
@param Interface The interface for the protocol being added
@param Notify indicates whether notify the notification list
for this protocol
@retval EFI_INVALID_PARAMETER Invalid parameter
@retval EFI_OUT_OF_RESOURCES No enough buffer to allocate
@retval EFI_SUCCESS Protocol interface successfully installed
**/
EFI_STATUS
MmInstallProtocolInterfaceNotify (
IN OUT EFI_HANDLE *UserHandle,
IN EFI_GUID *Protocol,
IN EFI_INTERFACE_TYPE InterfaceType,
IN VOID *Interface,
IN BOOLEAN Notify
)
{
PROTOCOL_INTERFACE *Prot;
PROTOCOL_ENTRY *ProtEntry;
IHANDLE *Handle;
EFI_STATUS Status;
VOID *ExistingInterface;
//
// returns EFI_INVALID_PARAMETER if InterfaceType is invalid.
// Also added check for invalid UserHandle and Protocol pointers.
//
if (UserHandle == NULL || Protocol == NULL) {
return EFI_INVALID_PARAMETER;
}
if (InterfaceType != EFI_NATIVE_INTERFACE) {
return EFI_INVALID_PARAMETER;
}
//
// Print debug message
//
DEBUG ((DEBUG_LOAD | DEBUG_INFO, "MmInstallProtocolInterface: %g %p\n", Protocol, Interface));
Status = EFI_OUT_OF_RESOURCES;
Prot = NULL;
Handle = NULL;
if (*UserHandle != NULL) {
Status = MmHandleProtocol (*UserHandle, Protocol, (VOID **)&ExistingInterface);
if (!EFI_ERROR (Status)) {
return EFI_INVALID_PARAMETER;
}
}
//
// Lookup the Protocol Entry for the requested protocol
//
ProtEntry = MmFindProtocolEntry (Protocol, TRUE);
if (ProtEntry == NULL) {
goto Done;
}
//
// Allocate a new protocol interface structure
//
Prot = AllocateZeroPool (sizeof (PROTOCOL_INTERFACE));
if (Prot == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Done;
}
//
// If caller didn't supply a handle, allocate a new one
//
Handle = (IHANDLE *)*UserHandle;
if (Handle == NULL) {
Handle = AllocateZeroPool (sizeof (IHANDLE));
if (Handle == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Done;
}
//
// Initialize new handler structure
//
Handle->Signature = EFI_HANDLE_SIGNATURE;
InitializeListHead (&Handle->Protocols);
//
// Add this handle to the list global list of all handles
// in the system
//
InsertTailList (&gHandleList, &Handle->AllHandles);
}
Status = MmValidateHandle (Handle);
if (EFI_ERROR (Status)) {
goto Done;
}
//
// Each interface that is added must be unique
//
ASSERT (MmFindProtocolInterface (Handle, Protocol, Interface) == NULL);
//
// Initialize the protocol interface structure
//
Prot->Signature = PROTOCOL_INTERFACE_SIGNATURE;
Prot->Handle = Handle;
Prot->Protocol = ProtEntry;
Prot->Interface = Interface;
//
// Add this protocol interface to the head of the supported
// protocol list for this handle
//
InsertHeadList (&Handle->Protocols, &Prot->Link);
//
// Add this protocol interface to the tail of the
// protocol entry
//
InsertTailList (&ProtEntry->Protocols, &Prot->ByProtocol);
//
// Notify the notification list for this protocol
//
if (Notify) {
MmNotifyProtocol (Prot);
}
Status = EFI_SUCCESS;
Done:
if (!EFI_ERROR (Status)) {
//
// Return the new handle back to the caller
//
*UserHandle = Handle;
} else {
//
// There was an error, clean up
//
if (Prot != NULL) {
FreePool (Prot);
}
}
return Status;
}
/**
Uninstalls all instances of a protocol:interfacer from a handle.
If the last protocol interface is remove from the handle, the
handle is freed.
@param UserHandle The handle to remove the protocol handler from
@param Protocol The protocol, of protocol:interface, to remove
@param Interface The interface, of protocol:interface, to remove
@retval EFI_INVALID_PARAMETER Protocol is NULL.
@retval EFI_SUCCESS Protocol interface successfully uninstalled.
**/
EFI_STATUS
EFIAPI
MmUninstallProtocolInterface (
IN EFI_HANDLE UserHandle,
IN EFI_GUID *Protocol,
IN VOID *Interface
)
{
EFI_STATUS Status;
IHANDLE *Handle;
PROTOCOL_INTERFACE *Prot;
//
// Check that Protocol is valid
//
if (Protocol == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check that UserHandle is a valid handle
//
Status = MmValidateHandle (UserHandle);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Check that Protocol exists on UserHandle, and Interface matches the interface in the database
//
Prot = MmFindProtocolInterface (UserHandle, Protocol, Interface);
if (Prot == NULL) {
return EFI_NOT_FOUND;
}
//
// Remove the protocol interface from the protocol
//
Status = EFI_NOT_FOUND;
Handle = (IHANDLE *)UserHandle;
Prot = MmRemoveInterfaceFromProtocol (Handle, Protocol, Interface);
if (Prot != NULL) {
//
// Remove the protocol interface from the handle
//
RemoveEntryList (&Prot->Link);
//
// Free the memory
//
Prot->Signature = 0;
FreePool (Prot);
Status = EFI_SUCCESS;
}
//
// If there are no more handlers for the handle, free the handle
//
if (IsListEmpty (&Handle->Protocols)) {
Handle->Signature = 0;
RemoveEntryList (&Handle->AllHandles);
FreePool (Handle);
}
return Status;
}
/**
Locate a certain GUID protocol interface in a Handle's protocols.
@param UserHandle The handle to obtain the protocol interface on
@param Protocol The GUID of the protocol
@return The requested protocol interface for the handle
**/
PROTOCOL_INTERFACE *
MmGetProtocolInterface (
IN EFI_HANDLE UserHandle,
IN EFI_GUID *Protocol
)
{
EFI_STATUS Status;
PROTOCOL_ENTRY *ProtEntry;
PROTOCOL_INTERFACE *Prot;
IHANDLE *Handle;
LIST_ENTRY *Link;
Status = MmValidateHandle (UserHandle);
if (EFI_ERROR (Status)) {
return NULL;
}
Handle = (IHANDLE *)UserHandle;
//
// Look at each protocol interface for a match
//
for (Link = Handle->Protocols.ForwardLink; Link != &Handle->Protocols; Link = Link->ForwardLink) {
Prot = CR (Link, PROTOCOL_INTERFACE, Link, PROTOCOL_INTERFACE_SIGNATURE);
ProtEntry = Prot->Protocol;
if (CompareGuid (&ProtEntry->ProtocolID, Protocol)) {
return Prot;
}
}
return NULL;
}
/**
Queries a handle to determine if it supports a specified protocol.
@param UserHandle The handle being queried.
@param Protocol The published unique identifier of the protocol.
@param Interface Supplies the address where a pointer to the
corresponding Protocol Interface is returned.
@retval EFI_SUCCESS The interface information for the specified protocol was returned.
@retval EFI_UNSUPPORTED The device does not support the specified protocol.
@retval EFI_INVALID_PARAMETER Handle is not a valid EFI_HANDLE..
@retval EFI_INVALID_PARAMETER Protocol is NULL.
@retval EFI_INVALID_PARAMETER Interface is NULL.
**/
EFI_STATUS
EFIAPI
MmHandleProtocol (
IN EFI_HANDLE UserHandle,
IN EFI_GUID *Protocol,
OUT VOID **Interface
)
{
EFI_STATUS Status;
PROTOCOL_INTERFACE *Prot;
//
// Check for invalid Protocol
//
if (Protocol == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check for invalid Interface
//
if (Interface == NULL) {
return EFI_INVALID_PARAMETER;
} else {
*Interface = NULL;
}
//
// Check for invalid UserHandle
//
Status = MmValidateHandle (UserHandle);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Look at each protocol interface for a match
//
Prot = MmGetProtocolInterface (UserHandle, Protocol);
if (Prot == NULL) {
return EFI_UNSUPPORTED;
}
//
// This is the protocol interface entry for this protocol
//
*Interface = Prot->Interface;
return EFI_SUCCESS;
}

View File

@ -0,0 +1,178 @@
/** @file
System Management System Table Services MmInstallConfigurationTable service
Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "StandaloneMmCore.h"
#define CONFIG_TABLE_SIZE_INCREASED 0x10
UINTN mMmSystemTableAllocateSize = 0;
/**
The MmInstallConfigurationTable() function is used to maintain the list
of configuration tables that are stored in the System Management System
Table. The list is stored as an array of (GUID, Pointer) pairs. The list
must be allocated from pool memory with PoolType set to EfiRuntimeServicesData.
@param SystemTable A pointer to the SMM System Table (SMST).
@param Guid A pointer to the GUID for the entry to add, update, or remove.
@param Table A pointer to the buffer of the table to add.
@param TableSize The size of the table to install.
@retval EFI_SUCCESS The (Guid, Table) pair was added, updated, or removed.
@retval EFI_INVALID_PARAMETER Guid is not valid.
@retval EFI_NOT_FOUND An attempt was made to delete a non-existent entry.
@retval EFI_OUT_OF_RESOURCES There is not enough memory available to complete the operation.
**/
EFI_STATUS
EFIAPI
MmInstallConfigurationTable (
IN CONST EFI_MM_SYSTEM_TABLE *SystemTable,
IN CONST EFI_GUID *Guid,
IN VOID *Table,
IN UINTN TableSize
)
{
UINTN Index;
EFI_CONFIGURATION_TABLE *ConfigurationTable;
EFI_CONFIGURATION_TABLE *OldTable;
//
// If Guid is NULL, then this operation cannot be performed
//
if (Guid == NULL) {
return EFI_INVALID_PARAMETER;
}
ConfigurationTable = gMmCoreMmst.MmConfigurationTable;
//
// Search all the table for an entry that matches Guid
//
for (Index = 0; Index < gMmCoreMmst.NumberOfTableEntries; Index++) {
if (CompareGuid (Guid, &(ConfigurationTable[Index].VendorGuid))) {
break;
}
}
if (Index < gMmCoreMmst.NumberOfTableEntries) {
//
// A match was found, so this is either a modify or a delete operation
//
if (Table != NULL) {
//
// If Table is not NULL, then this is a modify operation.
// Modify the table entry and return.
//
ConfigurationTable[Index].VendorTable = Table;
return EFI_SUCCESS;
}
//
// A match was found and Table is NULL, so this is a delete operation.
//
gMmCoreMmst.NumberOfTableEntries--;
//
// Copy over deleted entry
//
CopyMem (
&(ConfigurationTable[Index]),
&(ConfigurationTable[Index + 1]),
(gMmCoreMmst.NumberOfTableEntries - Index) * sizeof (EFI_CONFIGURATION_TABLE)
);
} else {
//
// No matching GUIDs were found, so this is an add operation.
//
if (Table == NULL) {
//
// If Table is NULL on an add operation, then return an error.
//
return EFI_NOT_FOUND;
}
//
// Assume that Index == gMmCoreMmst.NumberOfTableEntries
//
if ((Index * sizeof (EFI_CONFIGURATION_TABLE)) >= mMmSystemTableAllocateSize) {
//
// Allocate a table with one additional entry.
//
mMmSystemTableAllocateSize += (CONFIG_TABLE_SIZE_INCREASED * sizeof (EFI_CONFIGURATION_TABLE));
ConfigurationTable = AllocatePool (mMmSystemTableAllocateSize);
if (ConfigurationTable == NULL) {
//
// If a new table could not be allocated, then return an error.
//
return EFI_OUT_OF_RESOURCES;
}
if (gMmCoreMmst.MmConfigurationTable != NULL) {
//
// Copy the old table to the new table.
//
CopyMem (
ConfigurationTable,
gMmCoreMmst.MmConfigurationTable,
Index * sizeof (EFI_CONFIGURATION_TABLE)
);
//
// Record the old table pointer.
//
OldTable = gMmCoreMmst.MmConfigurationTable;
//
// As the MmInstallConfigurationTable() may be re-entered by FreePool() in
// its calling stack, updating System table to the new table pointer must
// be done before calling FreePool() to free the old table.
// It can make sure the gMmCoreMmst.MmConfigurationTable point to the new
// table and avoid the errors of use-after-free to the old table by the
// reenter of MmInstallConfigurationTable() in FreePool()'s calling stack.
//
gMmCoreMmst.MmConfigurationTable = ConfigurationTable;
//
// Free the old table after updating System Table to the new table pointer.
//
FreePool (OldTable);
} else {
//
// Update System Table
//
gMmCoreMmst.MmConfigurationTable = ConfigurationTable;
}
}
//
// Fill in the new entry
//
CopyGuid ((VOID *)&ConfigurationTable[Index].VendorGuid, Guid);
ConfigurationTable[Index].VendorTable = Table;
//
// This is an add operation, so increment the number of table entries
//
gMmCoreMmst.NumberOfTableEntries++;
}
//
// CRC-32 field is ignorable for SMM System Table and should be set to zero
//
return EFI_SUCCESS;
}

View File

@ -0,0 +1,496 @@
/** @file
Locate handle functions
Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "StandaloneMmCore.h"
//
// ProtocolRequest - Last LocateHandle request ID
//
UINTN mEfiLocateHandleRequest = 0;
//
// Internal prototypes
//
typedef struct {
EFI_GUID *Protocol;
VOID *SearchKey;
LIST_ENTRY *Position;
PROTOCOL_ENTRY *ProtEntry;
} LOCATE_POSITION;
typedef
IHANDLE *
(* CORE_GET_NEXT) (
IN OUT LOCATE_POSITION *Position,
OUT VOID **Interface
);
/**
Routine to get the next Handle, when you are searching for all handles.
@param Position Information about which Handle to seach for.
@param Interface Return the interface structure for the matching
protocol.
@return An pointer to IHANDLE if the next Position is not the end of the list.
Otherwise,NULL is returned.
**/
IHANDLE *
MmGetNextLocateAllHandles (
IN OUT LOCATE_POSITION *Position,
OUT VOID **Interface
)
{
IHANDLE *Handle;
//
// Next handle
//
Position->Position = Position->Position->ForwardLink;
//
// If not at the end of the list, get the handle
//
Handle = NULL;
*Interface = NULL;
if (Position->Position != &gHandleList) {
Handle = CR (Position->Position, IHANDLE, AllHandles, EFI_HANDLE_SIGNATURE);
}
return Handle;
}
/**
Routine to get the next Handle, when you are searching for register protocol
notifies.
@param Position Information about which Handle to seach for.
@param Interface Return the interface structure for the matching
protocol.
@return An pointer to IHANDLE if the next Position is not the end of the list.
Otherwise,NULL is returned.
**/
IHANDLE *
MmGetNextLocateByRegisterNotify (
IN OUT LOCATE_POSITION *Position,
OUT VOID **Interface
)
{
IHANDLE *Handle;
PROTOCOL_NOTIFY *ProtNotify;
PROTOCOL_INTERFACE *Prot;
LIST_ENTRY *Link;
Handle = NULL;
*Interface = NULL;
ProtNotify = Position->SearchKey;
//
// If this is the first request, get the next handle
//
if (ProtNotify != NULL) {
ASSERT (ProtNotify->Signature == PROTOCOL_NOTIFY_SIGNATURE);
Position->SearchKey = NULL;
//
// If not at the end of the list, get the next handle
//
Link = ProtNotify->Position->ForwardLink;
if (Link != &ProtNotify->Protocol->Protocols) {
Prot = CR (Link, PROTOCOL_INTERFACE, ByProtocol, PROTOCOL_INTERFACE_SIGNATURE);
Handle = Prot->Handle;
*Interface = Prot->Interface;
}
}
return Handle;
}
/**
Routine to get the next Handle, when you are searching for a given protocol.
@param Position Information about which Handle to seach for.
@param Interface Return the interface structure for the matching
protocol.
@return An pointer to IHANDLE if the next Position is not the end of the list.
Otherwise,NULL is returned.
**/
IHANDLE *
MmGetNextLocateByProtocol (
IN OUT LOCATE_POSITION *Position,
OUT VOID **Interface
)
{
IHANDLE *Handle;
LIST_ENTRY *Link;
PROTOCOL_INTERFACE *Prot;
Handle = NULL;
*Interface = NULL;
for (; ;) {
//
// Next entry
//
Link = Position->Position->ForwardLink;
Position->Position = Link;
//
// If not at the end, return the handle
//
if (Link == &Position->ProtEntry->Protocols) {
Handle = NULL;
break;
}
//
// Get the handle
//
Prot = CR (Link, PROTOCOL_INTERFACE, ByProtocol, PROTOCOL_INTERFACE_SIGNATURE);
Handle = Prot->Handle;
*Interface = Prot->Interface;
//
// If this handle has not been returned this request, then
// return it now
//
if (Handle->LocateRequest != mEfiLocateHandleRequest) {
Handle->LocateRequest = mEfiLocateHandleRequest;
break;
}
}
return Handle;
}
/**
Return the first Protocol Interface that matches the Protocol GUID. If
Registration is pasased in return a Protocol Instance that was just add
to the system. If Retistration is NULL return the first Protocol Interface
you find.
@param Protocol The protocol to search for
@param Registration Optional Registration Key returned from
RegisterProtocolNotify()
@param Interface Return the Protocol interface (instance).
@retval EFI_SUCCESS If a valid Interface is returned
@retval EFI_INVALID_PARAMETER Invalid parameter
@retval EFI_NOT_FOUND Protocol interface not found
**/
EFI_STATUS
EFIAPI
MmLocateProtocol (
IN EFI_GUID *Protocol,
IN VOID *Registration OPTIONAL,
OUT VOID **Interface
)
{
EFI_STATUS Status;
LOCATE_POSITION Position;
PROTOCOL_NOTIFY *ProtNotify;
IHANDLE *Handle;
if ((Interface == NULL) || (Protocol == NULL)) {
return EFI_INVALID_PARAMETER;
}
*Interface = NULL;
Status = EFI_SUCCESS;
//
// Set initial position
//
Position.Protocol = Protocol;
Position.SearchKey = Registration;
Position.Position = &gHandleList;
mEfiLocateHandleRequest += 1;
if (Registration == NULL) {
//
// Look up the protocol entry and set the head pointer
//
Position.ProtEntry = MmFindProtocolEntry (Protocol, FALSE);
if (Position.ProtEntry == NULL) {
return EFI_NOT_FOUND;
}
Position.Position = &Position.ProtEntry->Protocols;
Handle = MmGetNextLocateByProtocol (&Position, Interface);
} else {
Handle = MmGetNextLocateByRegisterNotify (&Position, Interface);
}
if (Handle == NULL) {
Status = EFI_NOT_FOUND;
} else if (Registration != NULL) {
//
// If this is a search by register notify and a handle was
// returned, update the register notification position
//
ProtNotify = Registration;
ProtNotify->Position = ProtNotify->Position->ForwardLink;
}
return Status;
}
/**
Locates the requested handle(s) and returns them in Buffer.
@param SearchType The type of search to perform to locate the
handles
@param Protocol The protocol to search for
@param SearchKey Dependant on SearchType
@param BufferSize On input the size of Buffer. On output the
size of data returned.
@param Buffer The buffer to return the results in
@retval EFI_BUFFER_TOO_SMALL Buffer too small, required buffer size is
returned in BufferSize.
@retval EFI_INVALID_PARAMETER Invalid parameter
@retval EFI_SUCCESS Successfully found the requested handle(s) and
returns them in Buffer.
**/
EFI_STATUS
EFIAPI
MmLocateHandle (
IN EFI_LOCATE_SEARCH_TYPE SearchType,
IN EFI_GUID *Protocol OPTIONAL,
IN VOID *SearchKey OPTIONAL,
IN OUT UINTN *BufferSize,
OUT EFI_HANDLE *Buffer
)
{
EFI_STATUS Status;
LOCATE_POSITION Position;
PROTOCOL_NOTIFY *ProtNotify;
CORE_GET_NEXT GetNext;
UINTN ResultSize;
IHANDLE *Handle;
IHANDLE **ResultBuffer;
VOID *Interface;
if (BufferSize == NULL) {
return EFI_INVALID_PARAMETER;
}
if ((*BufferSize > 0) && (Buffer == NULL)) {
return EFI_INVALID_PARAMETER;
}
GetNext = NULL;
//
// Set initial position
//
Position.Protocol = Protocol;
Position.SearchKey = SearchKey;
Position.Position = &gHandleList;
ResultSize = 0;
ResultBuffer = (IHANDLE **) Buffer;
Status = EFI_SUCCESS;
//
// Get the search function based on type
//
switch (SearchType) {
case AllHandles:
GetNext = MmGetNextLocateAllHandles;
break;
case ByRegisterNotify:
GetNext = MmGetNextLocateByRegisterNotify;
//
// Must have SearchKey for locate ByRegisterNotify
//
if (SearchKey == NULL) {
Status = EFI_INVALID_PARAMETER;
}
break;
case ByProtocol:
GetNext = MmGetNextLocateByProtocol;
if (Protocol == NULL) {
Status = EFI_INVALID_PARAMETER;
break;
}
//
// Look up the protocol entry and set the head pointer
//
Position.ProtEntry = MmFindProtocolEntry (Protocol, FALSE);
if (Position.ProtEntry == NULL) {
Status = EFI_NOT_FOUND;
break;
}
Position.Position = &Position.ProtEntry->Protocols;
break;
default:
Status = EFI_INVALID_PARAMETER;
break;
}
if (EFI_ERROR (Status)) {
return Status;
}
//
// Enumerate out the matching handles
//
mEfiLocateHandleRequest += 1;
for (; ;) {
//
// Get the next handle. If no more handles, stop
//
Handle = GetNext (&Position, &Interface);
if (NULL == Handle) {
break;
}
//
// Increase the resulting buffer size, and if this handle
// fits return it
//
ResultSize += sizeof (Handle);
if (ResultSize <= *BufferSize) {
*ResultBuffer = Handle;
ResultBuffer += 1;
}
}
//
// If the result is a zero length buffer, then there were no
// matching handles
//
if (ResultSize == 0) {
Status = EFI_NOT_FOUND;
} else {
//
// Return the resulting buffer size. If it's larger than what
// was passed, then set the error code
//
if (ResultSize > *BufferSize) {
Status = EFI_BUFFER_TOO_SMALL;
}
*BufferSize = ResultSize;
if (SearchType == ByRegisterNotify && !EFI_ERROR (Status)) {
ASSERT (SearchKey != NULL);
//
// If this is a search by register notify and a handle was
// returned, update the register notification position
//
ProtNotify = SearchKey;
ProtNotify->Position = ProtNotify->Position->ForwardLink;
}
}
return Status;
}
/**
Function returns an array of handles that support the requested protocol
in a buffer allocated from pool. This is a version of MmLocateHandle()
that allocates a buffer for the caller.
@param SearchType Specifies which handle(s) are to be returned.
@param Protocol Provides the protocol to search by. This
parameter is only valid for SearchType
ByProtocol.
@param SearchKey Supplies the search key depending on the
SearchType.
@param NumberHandles The number of handles returned in Buffer.
@param Buffer A pointer to the buffer to return the requested
array of handles that support Protocol.
@retval EFI_SUCCESS The result array of handles was returned.
@retval EFI_NOT_FOUND No handles match the search.
@retval EFI_OUT_OF_RESOURCES There is not enough pool memory to store the
matching results.
@retval EFI_INVALID_PARAMETER One or more parameters are not valid.
**/
EFI_STATUS
EFIAPI
MmLocateHandleBuffer (
IN EFI_LOCATE_SEARCH_TYPE SearchType,
IN EFI_GUID *Protocol OPTIONAL,
IN VOID *SearchKey OPTIONAL,
IN OUT UINTN *NumberHandles,
OUT EFI_HANDLE **Buffer
)
{
EFI_STATUS Status;
UINTN BufferSize;
if (NumberHandles == NULL) {
return EFI_INVALID_PARAMETER;
}
if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}
BufferSize = 0;
*NumberHandles = 0;
*Buffer = NULL;
Status = MmLocateHandle (
SearchType,
Protocol,
SearchKey,
&BufferSize,
*Buffer
);
//
// LocateHandleBuffer() returns incorrect status code if SearchType is
// invalid.
//
// Add code to correctly handle expected errors from MmLocateHandle().
//
if (EFI_ERROR (Status) && Status != EFI_BUFFER_TOO_SMALL) {
if (Status != EFI_INVALID_PARAMETER) {
Status = EFI_NOT_FOUND;
}
return Status;
}
*Buffer = AllocatePool (BufferSize);
if (*Buffer == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Status = MmLocateHandle (
SearchType,
Protocol,
SearchKey,
&BufferSize,
*Buffer
);
*NumberHandles = BufferSize / sizeof(EFI_HANDLE);
if (EFI_ERROR (Status)) {
*NumberHandles = 0;
}
return Status;
}

337
StandaloneMmPkg/Core/Mmi.c Normal file
View File

@ -0,0 +1,337 @@
/** @file
MMI management.
Copyright (c) 2009 - 2013, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "StandaloneMmCore.h"
//
// MM_HANDLER_STATE_NOTIFIER
//
//
// MM_HANDLER - used for each MM handler
//
#define MMI_ENTRY_SIGNATURE SIGNATURE_32('m','m','i','e')
typedef struct {
UINTN Signature;
LIST_ENTRY AllEntries; // All entries
EFI_GUID HandlerType; // Type of interrupt
LIST_ENTRY MmiHandlers; // All handlers
} MMI_ENTRY;
#define MMI_HANDLER_SIGNATURE SIGNATURE_32('m','m','i','h')
typedef struct {
UINTN Signature;
LIST_ENTRY Link; // Link on MMI_ENTRY.MmiHandlers
EFI_MM_HANDLER_ENTRY_POINT Handler; // The mm handler's entry point
MMI_ENTRY *MmiEntry;
} MMI_HANDLER;
LIST_ENTRY mRootMmiHandlerList = INITIALIZE_LIST_HEAD_VARIABLE (mRootMmiHandlerList);
LIST_ENTRY mMmiEntryList = INITIALIZE_LIST_HEAD_VARIABLE (mMmiEntryList);
/**
Finds the MMI entry for the requested handler type.
@param HandlerType The type of the interrupt
@param Create Create a new entry if not found
@return MMI entry
**/
MMI_ENTRY *
EFIAPI
MmCoreFindMmiEntry (
IN EFI_GUID *HandlerType,
IN BOOLEAN Create
)
{
LIST_ENTRY *Link;
MMI_ENTRY *Item;
MMI_ENTRY *MmiEntry;
//
// Search the MMI entry list for the matching GUID
//
MmiEntry = NULL;
for (Link = mMmiEntryList.ForwardLink;
Link != &mMmiEntryList;
Link = Link->ForwardLink) {
Item = CR (Link, MMI_ENTRY, AllEntries, MMI_ENTRY_SIGNATURE);
if (CompareGuid (&Item->HandlerType, HandlerType)) {
//
// This is the MMI entry
//
MmiEntry = Item;
break;
}
}
//
// If the protocol entry was not found and Create is TRUE, then
// allocate a new entry
//
if ((MmiEntry == NULL) && Create) {
MmiEntry = AllocatePool (sizeof (MMI_ENTRY));
if (MmiEntry != NULL) {
//
// Initialize new MMI entry structure
//
MmiEntry->Signature = MMI_ENTRY_SIGNATURE;
CopyGuid ((VOID *)&MmiEntry->HandlerType, HandlerType);
InitializeListHead (&MmiEntry->MmiHandlers);
//
// Add it to MMI entry list
//
InsertTailList (&mMmiEntryList, &MmiEntry->AllEntries);
}
}
return MmiEntry;
}
/**
Manage MMI of a particular type.
@param HandlerType Points to the handler type or NULL for root MMI handlers.
@param Context Points to an optional context buffer.
@param CommBuffer Points to the optional communication buffer.
@param CommBufferSize Points to the size of the optional communication buffer.
@retval EFI_WARN_INTERRUPT_SOURCE_PENDING Interrupt source was processed successfully but not quiesced.
@retval EFI_INTERRUPT_PENDING One or more MMI sources could not be quiesced.
@retval EFI_NOT_FOUND Interrupt source was not handled or quiesced.
@retval EFI_SUCCESS Interrupt source was handled and quiesced.
**/
EFI_STATUS
EFIAPI
MmiManage (
IN CONST EFI_GUID *HandlerType,
IN CONST VOID *Context OPTIONAL,
IN OUT VOID *CommBuffer OPTIONAL,
IN OUT UINTN *CommBufferSize OPTIONAL
)
{
LIST_ENTRY *Link;
LIST_ENTRY *Head;
MMI_ENTRY *MmiEntry;
MMI_HANDLER *MmiHandler;
BOOLEAN SuccessReturn;
EFI_STATUS Status;
Status = EFI_NOT_FOUND;
SuccessReturn = FALSE;
if (HandlerType == NULL) {
//
// Root MMI handler
//
Head = &mRootMmiHandlerList;
} else {
//
// Non-root MMI handler
//
MmiEntry = MmCoreFindMmiEntry ((EFI_GUID *) HandlerType, FALSE);
if (MmiEntry == NULL) {
//
// There is no handler registered for this interrupt source
//
return Status;
}
Head = &MmiEntry->MmiHandlers;
}
for (Link = Head->ForwardLink; Link != Head; Link = Link->ForwardLink) {
MmiHandler = CR (Link, MMI_HANDLER, Link, MMI_HANDLER_SIGNATURE);
Status = MmiHandler->Handler (
(EFI_HANDLE) MmiHandler,
Context,
CommBuffer,
CommBufferSize
);
switch (Status) {
case EFI_INTERRUPT_PENDING:
//
// If a handler returns EFI_INTERRUPT_PENDING and HandlerType is not NULL then
// no additional handlers will be processed and EFI_INTERRUPT_PENDING will be returned.
//
if (HandlerType != NULL) {
return EFI_INTERRUPT_PENDING;
}
break;
case EFI_SUCCESS:
//
// If at least one of the handlers returns EFI_SUCCESS then the function will return
// EFI_SUCCESS. If a handler returns EFI_SUCCESS and HandlerType is not NULL then no
// additional handlers will be processed.
//
if (HandlerType != NULL) {
return EFI_SUCCESS;
}
SuccessReturn = TRUE;
break;
case EFI_WARN_INTERRUPT_SOURCE_QUIESCED:
//
// If at least one of the handlers returns EFI_WARN_INTERRUPT_SOURCE_QUIESCED
// then the function will return EFI_SUCCESS.
//
SuccessReturn = TRUE;
break;
case EFI_WARN_INTERRUPT_SOURCE_PENDING:
//
// If all the handlers returned EFI_WARN_INTERRUPT_SOURCE_PENDING
// then EFI_WARN_INTERRUPT_SOURCE_PENDING will be returned.
//
break;
default:
//
// Unexpected status code returned.
//
ASSERT (FALSE);
break;
}
}
if (SuccessReturn) {
Status = EFI_SUCCESS;
}
return Status;
}
/**
Registers a handler to execute within MM.
@param Handler Handler service funtion pointer.
@param HandlerType Points to the handler type or NULL for root MMI handlers.
@param DispatchHandle On return, contains a unique handle which can be used to later unregister the handler function.
@retval EFI_SUCCESS Handler register success.
@retval EFI_INVALID_PARAMETER Handler or DispatchHandle is NULL.
**/
EFI_STATUS
EFIAPI
MmiHandlerRegister (
IN EFI_MM_HANDLER_ENTRY_POINT Handler,
IN CONST EFI_GUID *HandlerType OPTIONAL,
OUT EFI_HANDLE *DispatchHandle
)
{
MMI_HANDLER *MmiHandler;
MMI_ENTRY *MmiEntry;
LIST_ENTRY *List;
if (Handler == NULL || DispatchHandle == NULL) {
return EFI_INVALID_PARAMETER;
}
MmiHandler = AllocateZeroPool (sizeof (MMI_HANDLER));
if (MmiHandler == NULL) {
return EFI_OUT_OF_RESOURCES;
}
MmiHandler->Signature = MMI_HANDLER_SIGNATURE;
MmiHandler->Handler = Handler;
if (HandlerType == NULL) {
//
// This is root MMI handler
//
MmiEntry = NULL;
List = &mRootMmiHandlerList;
} else {
//
// None root MMI handler
//
MmiEntry = MmCoreFindMmiEntry ((EFI_GUID *) HandlerType, TRUE);
if (MmiEntry == NULL) {
return EFI_OUT_OF_RESOURCES;
}
List = &MmiEntry->MmiHandlers;
}
MmiHandler->MmiEntry = MmiEntry;
InsertTailList (List, &MmiHandler->Link);
*DispatchHandle = (EFI_HANDLE) MmiHandler;
return EFI_SUCCESS;
}
/**
Unregister a handler in MM.
@param DispatchHandle The handle that was specified when the handler was registered.
@retval EFI_SUCCESS Handler function was successfully unregistered.
@retval EFI_INVALID_PARAMETER DispatchHandle does not refer to a valid handle.
**/
EFI_STATUS
EFIAPI
MmiHandlerUnRegister (
IN EFI_HANDLE DispatchHandle
)
{
MMI_HANDLER *MmiHandler;
MMI_ENTRY *MmiEntry;
MmiHandler = (MMI_HANDLER *) DispatchHandle;
if (MmiHandler == NULL) {
return EFI_INVALID_PARAMETER;
}
if (MmiHandler->Signature != MMI_HANDLER_SIGNATURE) {
return EFI_INVALID_PARAMETER;
}
MmiEntry = MmiHandler->MmiEntry;
RemoveEntryList (&MmiHandler->Link);
FreePool (MmiHandler);
if (MmiEntry == NULL) {
//
// This is root MMI handler
//
return EFI_SUCCESS;
}
if (IsListEmpty (&MmiEntry->MmiHandlers)) {
//
// No handler registered for this interrupt now, remove the MMI_ENTRY
//
RemoveEntryList (&MmiEntry->AllEntries);
FreePool (MmiEntry);
}
return EFI_SUCCESS;
}

View File

@ -0,0 +1,203 @@
/** @file
Support functions for UEFI protocol notification infrastructure.
Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "StandaloneMmCore.h"
/**
Signal event for every protocol in protocol entry.
@param Prot Protocol interface
**/
VOID
MmNotifyProtocol (
IN PROTOCOL_INTERFACE *Prot
)
{
PROTOCOL_ENTRY *ProtEntry;
PROTOCOL_NOTIFY *ProtNotify;
LIST_ENTRY *Link;
ProtEntry = Prot->Protocol;
for (Link=ProtEntry->Notify.ForwardLink; Link != &ProtEntry->Notify; Link=Link->ForwardLink) {
ProtNotify = CR (Link, PROTOCOL_NOTIFY, Link, PROTOCOL_NOTIFY_SIGNATURE);
ProtNotify->Function (&ProtEntry->ProtocolID, Prot->Interface, Prot->Handle);
}
}
/**
Removes Protocol from the protocol list (but not the handle list).
@param Handle The handle to remove protocol on.
@param Protocol GUID of the protocol to be moved
@param Interface The interface of the protocol
@return Protocol Entry
**/
PROTOCOL_INTERFACE *
MmRemoveInterfaceFromProtocol (
IN IHANDLE *Handle,
IN EFI_GUID *Protocol,
IN VOID *Interface
)
{
PROTOCOL_INTERFACE *Prot;
PROTOCOL_NOTIFY *ProtNotify;
PROTOCOL_ENTRY *ProtEntry;
LIST_ENTRY *Link;
Prot = MmFindProtocolInterface (Handle, Protocol, Interface);
if (Prot != NULL) {
ProtEntry = Prot->Protocol;
//
// If there's a protocol notify location pointing to this entry, back it up one
//
for (Link = ProtEntry->Notify.ForwardLink; Link != &ProtEntry->Notify; Link = Link->ForwardLink) {
ProtNotify = CR (Link, PROTOCOL_NOTIFY, Link, PROTOCOL_NOTIFY_SIGNATURE);
if (ProtNotify->Position == &Prot->ByProtocol) {
ProtNotify->Position = Prot->ByProtocol.BackLink;
}
}
//
// Remove the protocol interface entry
//
RemoveEntryList (&Prot->ByProtocol);
}
return Prot;
}
/**
Add a new protocol notification record for the request protocol.
@param Protocol The requested protocol to add the notify
registration
@param Function Points to the notification function
@param Registration Returns the registration record
@retval EFI_SUCCESS Successfully returned the registration record
that has been added or unhooked
@retval EFI_INVALID_PARAMETER Protocol is NULL or Registration is NULL
@retval EFI_OUT_OF_RESOURCES Not enough memory resource to finish the request
@retval EFI_NOT_FOUND If the registration is not found when Function == NULL
**/
EFI_STATUS
EFIAPI
MmRegisterProtocolNotify (
IN CONST EFI_GUID *Protocol,
IN EFI_MM_NOTIFY_FN Function,
OUT VOID **Registration
)
{
PROTOCOL_ENTRY *ProtEntry;
PROTOCOL_NOTIFY *ProtNotify;
LIST_ENTRY *Link;
EFI_STATUS Status;
if (Protocol == NULL || Registration == NULL) {
return EFI_INVALID_PARAMETER;
}
if (Function == NULL) {
//
// Get the protocol entry per Protocol
//
ProtEntry = MmFindProtocolEntry ((EFI_GUID *) Protocol, FALSE);
if (ProtEntry != NULL) {
ProtNotify = (PROTOCOL_NOTIFY * )*Registration;
for (Link = ProtEntry->Notify.ForwardLink;
Link != &ProtEntry->Notify;
Link = Link->ForwardLink) {
//
// Compare the notification record
//
if (ProtNotify == (CR (Link, PROTOCOL_NOTIFY, Link, PROTOCOL_NOTIFY_SIGNATURE))) {
//
// If Registration is an existing registration, then unhook it
//
ProtNotify->Signature = 0;
RemoveEntryList (&ProtNotify->Link);
FreePool (ProtNotify);
return EFI_SUCCESS;
}
}
}
//
// If the registration is not found
//
return EFI_NOT_FOUND;
}
ProtNotify = NULL;
//
// Get the protocol entry to add the notification too
//
ProtEntry = MmFindProtocolEntry ((EFI_GUID *) Protocol, TRUE);
if (ProtEntry != NULL) {
//
// Find whether notification already exist
//
for (Link = ProtEntry->Notify.ForwardLink;
Link != &ProtEntry->Notify;
Link = Link->ForwardLink) {
ProtNotify = CR (Link, PROTOCOL_NOTIFY, Link, PROTOCOL_NOTIFY_SIGNATURE);
if (CompareGuid (&ProtNotify->Protocol->ProtocolID, Protocol) &&
(ProtNotify->Function == Function)) {
//
// Notification already exist
//
*Registration = ProtNotify;
return EFI_SUCCESS;
}
}
//
// Allocate a new notification record
//
ProtNotify = AllocatePool (sizeof (PROTOCOL_NOTIFY));
if (ProtNotify != NULL) {
ProtNotify->Signature = PROTOCOL_NOTIFY_SIGNATURE;
ProtNotify->Protocol = ProtEntry;
ProtNotify->Function = Function;
//
// Start at the ending
//
ProtNotify->Position = ProtEntry->Protocols.BackLink;
InsertTailList (&ProtEntry->Notify, &ProtNotify->Link);
}
}
//
// Done. If we have a protocol notify entry, then return it.
// Otherwise, we must have run out of resources trying to add one
//
Status = EFI_OUT_OF_RESOURCES;
if (ProtNotify != NULL) {
*Registration = ProtNotify;
Status = EFI_SUCCESS;
}
return Status;
}

384
StandaloneMmPkg/Core/Page.c Normal file
View File

@ -0,0 +1,384 @@
/** @file
MM Memory page management functions.
Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "StandaloneMmCore.h"
#define NEXT_MEMORY_DESCRIPTOR(MemoryDescriptor, Size) \
((EFI_MEMORY_DESCRIPTOR *)((UINT8 *)(MemoryDescriptor) + (Size)))
#define TRUNCATE_TO_PAGES(a) ((a) >> EFI_PAGE_SHIFT)
LIST_ENTRY mMmMemoryMap = INITIALIZE_LIST_HEAD_VARIABLE (mMmMemoryMap);
UINTN mMapKey;
/**
Internal Function. Allocate n pages from given free page node.
@param Pages The free page node.
@param NumberOfPages Number of pages to be allocated.
@param MaxAddress Request to allocate memory below this address.
@return Memory address of allocated pages.
**/
UINTN
InternalAllocPagesOnOneNode (
IN OUT FREE_PAGE_LIST *Pages,
IN UINTN NumberOfPages,
IN UINTN MaxAddress
)
{
UINTN Top;
UINTN Bottom;
FREE_PAGE_LIST *Node;
Top = TRUNCATE_TO_PAGES (MaxAddress + 1 - (UINTN)Pages);
if (Top > Pages->NumberOfPages) {
Top = Pages->NumberOfPages;
}
Bottom = Top - NumberOfPages;
if (Top < Pages->NumberOfPages) {
Node = (FREE_PAGE_LIST*)((UINTN)Pages + EFI_PAGES_TO_SIZE (Top));
Node->NumberOfPages = Pages->NumberOfPages - Top;
InsertHeadList (&Pages->Link, &Node->Link);
}
if (Bottom > 0) {
Pages->NumberOfPages = Bottom;
} else {
RemoveEntryList (&Pages->Link);
}
return (UINTN)Pages + EFI_PAGES_TO_SIZE (Bottom);
}
/**
Internal Function. Allocate n pages from free page list below MaxAddress.
@param FreePageList The free page node.
@param NumberOfPages Number of pages to be allocated.
@param MaxAddress Request to allocate memory below this address.
@return Memory address of allocated pages.
**/
UINTN
InternalAllocMaxAddress (
IN OUT LIST_ENTRY *FreePageList,
IN UINTN NumberOfPages,
IN UINTN MaxAddress
)
{
LIST_ENTRY *Node;
FREE_PAGE_LIST *Pages;
for (Node = FreePageList->BackLink; Node != FreePageList; Node = Node->BackLink) {
Pages = BASE_CR (Node, FREE_PAGE_LIST, Link);
if (Pages->NumberOfPages >= NumberOfPages &&
(UINTN)Pages + EFI_PAGES_TO_SIZE (NumberOfPages) - 1 <= MaxAddress) {
return InternalAllocPagesOnOneNode (Pages, NumberOfPages, MaxAddress);
}
}
return (UINTN)(-1);
}
/**
Internal Function. Allocate n pages from free page list at given address.
@param FreePageList The free page node.
@param NumberOfPages Number of pages to be allocated.
@param MaxAddress Request to allocate memory below this address.
@return Memory address of allocated pages.
**/
UINTN
InternalAllocAddress (
IN OUT LIST_ENTRY *FreePageList,
IN UINTN NumberOfPages,
IN UINTN Address
)
{
UINTN EndAddress;
LIST_ENTRY *Node;
FREE_PAGE_LIST *Pages;
if ((Address & EFI_PAGE_MASK) != 0) {
return ~Address;
}
EndAddress = Address + EFI_PAGES_TO_SIZE (NumberOfPages);
for (Node = FreePageList->BackLink; Node!= FreePageList; Node = Node->BackLink) {
Pages = BASE_CR (Node, FREE_PAGE_LIST, Link);
if ((UINTN)Pages <= Address) {
if ((UINTN)Pages + EFI_PAGES_TO_SIZE (Pages->NumberOfPages) < EndAddress) {
break;
}
return InternalAllocPagesOnOneNode (Pages, NumberOfPages, EndAddress);
}
}
return ~Address;
}
/**
Allocates pages from the memory map.
@param Type The type of allocation to perform.
@param MemoryType The type of memory to turn the allocated pages
into.
@param NumberOfPages The number of pages to allocate.
@param Memory A pointer to receive the base allocated memory
address.
@retval EFI_INVALID_PARAMETER Parameters violate checking rules defined in spec.
@retval EFI_NOT_FOUND Could not allocate pages match the requirement.
@retval EFI_OUT_OF_RESOURCES No enough pages to allocate.
@retval EFI_SUCCESS Pages successfully allocated.
**/
EFI_STATUS
EFIAPI
MmInternalAllocatePages (
IN EFI_ALLOCATE_TYPE Type,
IN EFI_MEMORY_TYPE MemoryType,
IN UINTN NumberOfPages,
OUT EFI_PHYSICAL_ADDRESS *Memory
)
{
UINTN RequestedAddress;
if (MemoryType != EfiRuntimeServicesCode &&
MemoryType != EfiRuntimeServicesData) {
return EFI_INVALID_PARAMETER;
}
if (NumberOfPages > TRUNCATE_TO_PAGES ((UINTN)-1) + 1) {
return EFI_OUT_OF_RESOURCES;
}
//
// We don't track memory type in MM
//
RequestedAddress = (UINTN)*Memory;
switch (Type) {
case AllocateAnyPages:
RequestedAddress = (UINTN)(-1);
case AllocateMaxAddress:
*Memory = InternalAllocMaxAddress (
&mMmMemoryMap,
NumberOfPages,
RequestedAddress
);
if (*Memory == (UINTN)-1) {
return EFI_OUT_OF_RESOURCES;
}
break;
case AllocateAddress:
*Memory = InternalAllocAddress (
&mMmMemoryMap,
NumberOfPages,
RequestedAddress
);
if (*Memory != RequestedAddress) {
return EFI_NOT_FOUND;
}
break;
default:
return EFI_INVALID_PARAMETER;
}
return EFI_SUCCESS;
}
/**
Allocates pages from the memory map.
@param Type The type of allocation to perform.
@param MemoryType The type of memory to turn the allocated pages
into.
@param NumberOfPages The number of pages to allocate.
@param Memory A pointer to receive the base allocated memory
address.
@retval EFI_INVALID_PARAMETER Parameters violate checking rules defined in spec.
@retval EFI_NOT_FOUND Could not allocate pages match the requirement.
@retval EFI_OUT_OF_RESOURCES No enough pages to allocate.
@retval EFI_SUCCESS Pages successfully allocated.
**/
EFI_STATUS
EFIAPI
MmAllocatePages (
IN EFI_ALLOCATE_TYPE Type,
IN EFI_MEMORY_TYPE MemoryType,
IN UINTN NumberOfPages,
OUT EFI_PHYSICAL_ADDRESS *Memory
)
{
EFI_STATUS Status;
Status = MmInternalAllocatePages (Type, MemoryType, NumberOfPages, Memory);
return Status;
}
/**
Internal Function. Merge two adjacent nodes.
@param First The first of two nodes to merge.
@return Pointer to node after merge (if success) or pointer to next node (if fail).
**/
FREE_PAGE_LIST *
InternalMergeNodes (
IN FREE_PAGE_LIST *First
)
{
FREE_PAGE_LIST *Next;
Next = BASE_CR (First->Link.ForwardLink, FREE_PAGE_LIST, Link);
ASSERT (
TRUNCATE_TO_PAGES ((UINTN)Next - (UINTN)First) >= First->NumberOfPages);
if (TRUNCATE_TO_PAGES ((UINTN)Next - (UINTN)First) == First->NumberOfPages) {
First->NumberOfPages += Next->NumberOfPages;
RemoveEntryList (&Next->Link);
Next = First;
}
return Next;
}
/**
Frees previous allocated pages.
@param Memory Base address of memory being freed.
@param NumberOfPages The number of pages to free.
@retval EFI_NOT_FOUND Could not find the entry that covers the range.
@retval EFI_INVALID_PARAMETER Address not aligned.
@return EFI_SUCCESS Pages successfully freed.
**/
EFI_STATUS
EFIAPI
MmInternalFreePages (
IN EFI_PHYSICAL_ADDRESS Memory,
IN UINTN NumberOfPages
)
{
LIST_ENTRY *Node;
FREE_PAGE_LIST *Pages;
if ((Memory & EFI_PAGE_MASK) != 0) {
return EFI_INVALID_PARAMETER;
}
Pages = NULL;
Node = mMmMemoryMap.ForwardLink;
while (Node != &mMmMemoryMap) {
Pages = BASE_CR (Node, FREE_PAGE_LIST, Link);
if (Memory < (UINTN)Pages) {
break;
}
Node = Node->ForwardLink;
}
if (Node != &mMmMemoryMap &&
Memory + EFI_PAGES_TO_SIZE (NumberOfPages) > (UINTN)Pages) {
return EFI_INVALID_PARAMETER;
}
if (Node->BackLink != &mMmMemoryMap) {
Pages = BASE_CR (Node->BackLink, FREE_PAGE_LIST, Link);
if ((UINTN)Pages + EFI_PAGES_TO_SIZE (Pages->NumberOfPages) > Memory) {
return EFI_INVALID_PARAMETER;
}
}
Pages = (FREE_PAGE_LIST*)(UINTN)Memory;
Pages->NumberOfPages = NumberOfPages;
InsertTailList (Node, &Pages->Link);
if (Pages->Link.BackLink != &mMmMemoryMap) {
Pages = InternalMergeNodes (
BASE_CR (Pages->Link.BackLink, FREE_PAGE_LIST, Link)
);
}
if (Node != &mMmMemoryMap) {
InternalMergeNodes (Pages);
}
return EFI_SUCCESS;
}
/**
Frees previous allocated pages.
@param Memory Base address of memory being freed.
@param NumberOfPages The number of pages to free.
@retval EFI_NOT_FOUND Could not find the entry that covers the range.
@retval EFI_INVALID_PARAMETER Address not aligned.
@return EFI_SUCCESS Pages successfully freed.
**/
EFI_STATUS
EFIAPI
MmFreePages (
IN EFI_PHYSICAL_ADDRESS Memory,
IN UINTN NumberOfPages
)
{
EFI_STATUS Status;
Status = MmInternalFreePages (Memory, NumberOfPages);
return Status;
}
/**
Add free MMRAM region for use by memory service.
@param MemBase Base address of memory region.
@param MemLength Length of the memory region.
@param Type Memory type.
@param Attributes Memory region state.
**/
VOID
MmAddMemoryRegion (
IN EFI_PHYSICAL_ADDRESS MemBase,
IN UINT64 MemLength,
IN EFI_MEMORY_TYPE Type,
IN UINT64 Attributes
)
{
UINTN AlignedMemBase;
//
// Do not add memory regions that is already allocated, needs testing, or needs ECC initialization
//
if ((Attributes & (EFI_ALLOCATED | EFI_NEEDS_TESTING | EFI_NEEDS_ECC_INITIALIZATION)) != 0) {
return;
}
//
// Align range on an EFI_PAGE_SIZE boundary
//
AlignedMemBase = (UINTN)(MemBase + EFI_PAGE_MASK) & ~EFI_PAGE_MASK;
MemLength -= AlignedMemBase - MemBase;
MmFreePages (AlignedMemBase, TRUNCATE_TO_PAGES ((UINTN)MemLength));
}

293
StandaloneMmPkg/Core/Pool.c Normal file
View File

@ -0,0 +1,293 @@
/** @file
SMM Memory pool management functions.
Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "StandaloneMmCore.h"
LIST_ENTRY mMmPoolLists[MAX_POOL_INDEX];
//
// To cache the MMRAM base since when Loading modules At fixed address feature is enabled,
// all module is assigned an offset relative the MMRAM base in build time.
//
GLOBAL_REMOVE_IF_UNREFERENCED EFI_PHYSICAL_ADDRESS gLoadModuleAtFixAddressMmramBase = 0;
/**
Called to initialize the memory service.
@param MmramRangeCount Number of MMRAM Regions
@param MmramRanges Pointer to MMRAM Descriptors
**/
VOID
MmInitializeMemoryServices (
IN UINTN MmramRangeCount,
IN EFI_MMRAM_DESCRIPTOR *MmramRanges
)
{
UINTN Index;
//
// Initialize Pool list
//
for (Index = sizeof (mMmPoolLists) / sizeof (*mMmPoolLists); Index > 0;) {
InitializeListHead (&mMmPoolLists[--Index]);
}
//
// Initialize free MMRAM regions
//
for (Index = 0; Index < MmramRangeCount; Index++) {
//
// BUGBUG: Add legacy MMRAM region is buggy.
//
if (MmramRanges[Index].CpuStart < BASE_1MB) {
continue;
}
DEBUG ((DEBUG_INFO, "MmAddMemoryRegion %d : 0x%016lx - 0x%016lx\n",
Index, MmramRanges[Index].CpuStart, MmramRanges[Index].PhysicalSize));
MmAddMemoryRegion (
MmramRanges[Index].CpuStart,
MmramRanges[Index].PhysicalSize,
EfiConventionalMemory,
MmramRanges[Index].RegionState
);
}
}
/**
Internal Function. Allocate a pool by specified PoolIndex.
@param PoolIndex Index which indicate the Pool size.
@param FreePoolHdr The returned Free pool.
@retval EFI_OUT_OF_RESOURCES Allocation failed.
@retval EFI_SUCCESS Pool successfully allocated.
**/
EFI_STATUS
InternalAllocPoolByIndex (
IN UINTN PoolIndex,
OUT FREE_POOL_HEADER **FreePoolHdr
)
{
EFI_STATUS Status;
FREE_POOL_HEADER *Hdr;
EFI_PHYSICAL_ADDRESS Address;
ASSERT (PoolIndex <= MAX_POOL_INDEX);
Status = EFI_SUCCESS;
Hdr = NULL;
if (PoolIndex == MAX_POOL_INDEX) {
Status = MmInternalAllocatePages (
AllocateAnyPages,
EfiRuntimeServicesData,
EFI_SIZE_TO_PAGES (MAX_POOL_SIZE << 1),
&Address
);
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
}
Hdr = (FREE_POOL_HEADER *) (UINTN) Address;
} else if (!IsListEmpty (&mMmPoolLists[PoolIndex])) {
Hdr = BASE_CR (GetFirstNode (&mMmPoolLists[PoolIndex]), FREE_POOL_HEADER, Link);
RemoveEntryList (&Hdr->Link);
} else {
Status = InternalAllocPoolByIndex (PoolIndex + 1, &Hdr);
if (!EFI_ERROR (Status)) {
Hdr->Header.Size >>= 1;
Hdr->Header.Available = TRUE;
InsertHeadList (&mMmPoolLists[PoolIndex], &Hdr->Link);
Hdr = (FREE_POOL_HEADER*)((UINT8*)Hdr + Hdr->Header.Size);
}
}
if (!EFI_ERROR (Status)) {
Hdr->Header.Size = MIN_POOL_SIZE << PoolIndex;
Hdr->Header.Available = FALSE;
}
*FreePoolHdr = Hdr;
return Status;
}
/**
Internal Function. Free a pool by specified PoolIndex.
@param FreePoolHdr The pool to free.
@retval EFI_SUCCESS Pool successfully freed.
**/
EFI_STATUS
InternalFreePoolByIndex (
IN FREE_POOL_HEADER *FreePoolHdr
)
{
UINTN PoolIndex;
ASSERT ((FreePoolHdr->Header.Size & (FreePoolHdr->Header.Size - 1)) == 0);
ASSERT (((UINTN)FreePoolHdr & (FreePoolHdr->Header.Size - 1)) == 0);
ASSERT (FreePoolHdr->Header.Size >= MIN_POOL_SIZE);
PoolIndex = (UINTN) (HighBitSet32 ((UINT32)FreePoolHdr->Header.Size) - MIN_POOL_SHIFT);
FreePoolHdr->Header.Available = TRUE;
ASSERT (PoolIndex < MAX_POOL_INDEX);
InsertHeadList (&mMmPoolLists[PoolIndex], &FreePoolHdr->Link);
return EFI_SUCCESS;
}
/**
Allocate pool of a particular type.
@param PoolType Type of pool to allocate.
@param Size The amount of pool to allocate.
@param Buffer The address to return a pointer to the allocated
pool.
@retval EFI_INVALID_PARAMETER PoolType not valid.
@retval EFI_OUT_OF_RESOURCES Size exceeds max pool size or allocation failed.
@retval EFI_SUCCESS Pool successfully allocated.
**/
EFI_STATUS
EFIAPI
MmInternalAllocatePool (
IN EFI_MEMORY_TYPE PoolType,
IN UINTN Size,
OUT VOID **Buffer
)
{
POOL_HEADER *PoolHdr;
FREE_POOL_HEADER *FreePoolHdr;
EFI_STATUS Status;
EFI_PHYSICAL_ADDRESS Address;
UINTN PoolIndex;
if (PoolType != EfiRuntimeServicesCode &&
PoolType != EfiRuntimeServicesData) {
return EFI_INVALID_PARAMETER;
}
Size += sizeof (*PoolHdr);
if (Size > MAX_POOL_SIZE) {
Size = EFI_SIZE_TO_PAGES (Size);
Status = MmInternalAllocatePages (AllocateAnyPages, PoolType, Size, &Address);
if (EFI_ERROR (Status)) {
return Status;
}
PoolHdr = (POOL_HEADER*)(UINTN)Address;
PoolHdr->Size = EFI_PAGES_TO_SIZE (Size);
PoolHdr->Available = FALSE;
*Buffer = PoolHdr + 1;
return Status;
}
Size = (Size + MIN_POOL_SIZE - 1) >> MIN_POOL_SHIFT;
PoolIndex = (UINTN) HighBitSet32 ((UINT32)Size);
if ((Size & (Size - 1)) != 0) {
PoolIndex++;
}
Status = InternalAllocPoolByIndex (PoolIndex, &FreePoolHdr);
if (!EFI_ERROR (Status)) {
*Buffer = &FreePoolHdr->Header + 1;
}
return Status;
}
/**
Allocate pool of a particular type.
@param PoolType Type of pool to allocate.
@param Size The amount of pool to allocate.
@param Buffer The address to return a pointer to the allocated
pool.
@retval EFI_INVALID_PARAMETER PoolType not valid.
@retval EFI_OUT_OF_RESOURCES Size exceeds max pool size or allocation failed.
@retval EFI_SUCCESS Pool successfully allocated.
**/
EFI_STATUS
EFIAPI
MmAllocatePool (
IN EFI_MEMORY_TYPE PoolType,
IN UINTN Size,
OUT VOID **Buffer
)
{
EFI_STATUS Status;
Status = MmInternalAllocatePool (PoolType, Size, Buffer);
return Status;
}
/**
Frees pool.
@param Buffer The allocated pool entry to free.
@retval EFI_INVALID_PARAMETER Buffer is not a valid value.
@retval EFI_SUCCESS Pool successfully freed.
**/
EFI_STATUS
EFIAPI
MmInternalFreePool (
IN VOID *Buffer
)
{
FREE_POOL_HEADER *FreePoolHdr;
if (Buffer == NULL) {
return EFI_INVALID_PARAMETER;
}
FreePoolHdr = (FREE_POOL_HEADER*)((POOL_HEADER*)Buffer - 1);
ASSERT (!FreePoolHdr->Header.Available);
if (FreePoolHdr->Header.Size > MAX_POOL_SIZE) {
ASSERT (((UINTN)FreePoolHdr & EFI_PAGE_MASK) == 0);
ASSERT ((FreePoolHdr->Header.Size & EFI_PAGE_MASK) == 0);
return MmInternalFreePages (
(EFI_PHYSICAL_ADDRESS)(UINTN)FreePoolHdr,
EFI_SIZE_TO_PAGES (FreePoolHdr->Header.Size)
);
}
return InternalFreePoolByIndex (FreePoolHdr);
}
/**
Frees pool.
@param Buffer The allocated pool entry to free.
@retval EFI_INVALID_PARAMETER Buffer is not a valid value.
@retval EFI_SUCCESS Pool successfully freed.
**/
EFI_STATUS
EFIAPI
MmFreePool (
IN VOID *Buffer
)
{
EFI_STATUS Status;
Status = MmInternalFreePool (Buffer);
return Status;
}

View File

@ -0,0 +1,712 @@
/** @file
MM Core Main Entry Point
Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "StandaloneMmCore.h"
EFI_STATUS
MmCoreFfsFindMmDriver (
IN EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader
);
EFI_STATUS
MmDispatcher (
VOID
);
//
// Globals used to initialize the protocol
//
EFI_HANDLE mMmCpuHandle = NULL;
//
// Physical pointer to private structure shared between MM IPL and the MM Core
//
MM_CORE_PRIVATE_DATA *gMmCorePrivate;
//
// MM Core global variable for MM System Table. Only accessed as a physical structure in MMRAM.
//
EFI_MM_SYSTEM_TABLE gMmCoreMmst = {
// The table header for the MMST.
{
MM_MMST_SIGNATURE,
EFI_MM_SYSTEM_TABLE_REVISION,
sizeof (gMmCoreMmst.Hdr)
},
// MmFirmwareVendor
NULL,
// MmFirmwareRevision
0,
// MmInstallConfigurationTable
MmInstallConfigurationTable,
// I/O Service
{
{
(EFI_MM_CPU_IO) MmEfiNotAvailableYetArg5, // MmMemRead
(EFI_MM_CPU_IO) MmEfiNotAvailableYetArg5 // MmMemWrite
},
{
(EFI_MM_CPU_IO) MmEfiNotAvailableYetArg5, // MmIoRead
(EFI_MM_CPU_IO) MmEfiNotAvailableYetArg5 // MmIoWrite
}
},
// Runtime memory services
MmAllocatePool,
MmFreePool,
MmAllocatePages,
MmFreePages,
// MP service
NULL, // MmStartupThisAp
0, // CurrentlyExecutingCpu
0, // NumberOfCpus
NULL, // CpuSaveStateSize
NULL, // CpuSaveState
0, // NumberOfTableEntries
NULL, // MmConfigurationTable
MmInstallProtocolInterface,
MmUninstallProtocolInterface,
MmHandleProtocol,
MmRegisterProtocolNotify,
MmLocateHandle,
MmLocateProtocol,
MmiManage,
MmiHandlerRegister,
MmiHandlerUnRegister
};
//
// Flag to determine if the platform has performed a legacy boot.
// If this flag is TRUE, then the runtime code and runtime data associated with the
// MM IPL are converted to free memory, so the MM Core must guarantee that is
// does not touch of the code/data associated with the MM IPL if this flag is TRUE.
//
BOOLEAN mInLegacyBoot = FALSE;
//
// Table of MMI Handlers that are registered by the MM Core when it is initialized
//
MM_CORE_MMI_HANDLERS mMmCoreMmiHandlers[] = {
{ MmFvDispatchHandler, &gMmFvDispatchGuid, NULL, TRUE },
{ MmDriverDispatchHandler, &gEfiEventDxeDispatchGuid, NULL, TRUE },
{ MmReadyToLockHandler, &gEfiDxeMmReadyToLockProtocolGuid, NULL, TRUE },
{ MmEndOfDxeHandler, &gEfiEndOfDxeEventGroupGuid, NULL, FALSE },
{ MmLegacyBootHandler, &gEfiEventLegacyBootGuid, NULL, FALSE },
{ MmExitBootServiceHandler,&gEfiEventExitBootServicesGuid, NULL, FALSE },
{ MmReadyToBootHandler, &gEfiEventReadyToBootGuid, NULL, FALSE },
{ NULL, NULL, NULL, FALSE },
};
EFI_SYSTEM_TABLE *mEfiSystemTable;
UINTN mMmramRangeCount;
EFI_MMRAM_DESCRIPTOR *mMmramRanges;
/**
Place holder function until all the MM System Table Service are available.
Note: This function is only used by MMRAM invocation. It is never used by DXE invocation.
@param Arg1 Undefined
@param Arg2 Undefined
@param Arg3 Undefined
@param Arg4 Undefined
@param Arg5 Undefined
@return EFI_NOT_AVAILABLE_YET
**/
EFI_STATUS
EFIAPI
MmEfiNotAvailableYetArg5 (
UINTN Arg1,
UINTN Arg2,
UINTN Arg3,
UINTN Arg4,
UINTN Arg5
)
{
//
// This function should never be executed. If it does, then the architectural protocols
// have not been designed correctly.
//
return EFI_NOT_AVAILABLE_YET;
}
/**
Software MMI handler that is called when a Legacy Boot event is signaled. The MM
Core uses this signal to know that a Legacy Boot has been performed and that
gMmCorePrivate that is shared between the UEFI and MM execution environments can
not be accessed from MM anymore since that structure is considered free memory by
a legacy OS.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmLegacyBootHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
)
{
EFI_HANDLE MmHandle;
EFI_STATUS Status = EFI_SUCCESS;
if (!mInLegacyBoot) {
MmHandle = NULL;
Status = MmInstallProtocolInterface (
&MmHandle,
&gEfiEventLegacyBootGuid,
EFI_NATIVE_INTERFACE,
NULL
);
}
mInLegacyBoot = TRUE;
return Status;
}
/**
Software MMI handler that is called when a ExitBoot Service event is signaled.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmExitBootServiceHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
)
{
EFI_HANDLE MmHandle;
EFI_STATUS Status = EFI_SUCCESS;
STATIC BOOLEAN mInExitBootServices = FALSE;
if (!mInExitBootServices) {
MmHandle = NULL;
Status = MmInstallProtocolInterface (
&MmHandle,
&gEfiEventExitBootServicesGuid,
EFI_NATIVE_INTERFACE,
NULL
);
}
mInExitBootServices = TRUE;
return Status;
}
/**
Software MMI handler that is called when a ExitBoot Service event is signaled.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmReadyToBootHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
)
{
EFI_HANDLE MmHandle;
EFI_STATUS Status = EFI_SUCCESS;
STATIC BOOLEAN mInReadyToBoot = FALSE;
if (!mInReadyToBoot) {
MmHandle = NULL;
Status = MmInstallProtocolInterface (
&MmHandle,
&gEfiEventReadyToBootGuid,
EFI_NATIVE_INTERFACE,
NULL
);
}
mInReadyToBoot = TRUE;
return Status;
}
/**
Software MMI handler that is called when the DxeMmReadyToLock protocol is added
or if gEfiEventReadyToBootGuid is signaled. This function unregisters the
Software SMIs that are nor required after MMRAM is locked and installs the
MM Ready To Lock Protocol so MM Drivers are informed that MMRAM is about
to be locked.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmReadyToLockHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
)
{
EFI_STATUS Status;
UINTN Index;
EFI_HANDLE MmHandle;
DEBUG ((DEBUG_INFO, "MmReadyToLockHandler\n"));
//
// Unregister MMI Handlers that are no longer required after the MM driver dispatch is stopped
//
for (Index = 0; mMmCoreMmiHandlers[Index].HandlerType != NULL; Index++) {
if (mMmCoreMmiHandlers[Index].UnRegister) {
MmiHandlerUnRegister (mMmCoreMmiHandlers[Index].DispatchHandle);
}
}
//
// Install MM Ready to lock protocol
//
MmHandle = NULL;
Status = MmInstallProtocolInterface (
&MmHandle,
&gEfiMmReadyToLockProtocolGuid,
EFI_NATIVE_INTERFACE,
NULL
);
//
// Make sure MM CPU I/O 2 Protocol has been installed into the handle database
//
//Status = MmLocateProtocol (&EFI_MM_CPU_IO_PROTOCOL_GUID, NULL, &Interface);
//
// Print a message on a debug build if the MM CPU I/O 2 Protocol is not installed
//
//if (EFI_ERROR (Status)) {
//DEBUG ((DEBUG_ERROR, "\nSMM: SmmCpuIo Arch Protocol not present!!\n"));
//}
//
// Assert if the CPU I/O 2 Protocol is not installed
//
//ASSERT_EFI_ERROR (Status);
//
// Display any drivers that were not dispatched because dependency expression
// evaluated to false if this is a debug build
//
//MmDisplayDiscoveredNotDispatched ();
return Status;
}
/**
Software MMI handler that is called when the EndOfDxe event is signaled.
This function installs the MM EndOfDxe Protocol so MM Drivers are informed that
platform code will invoke 3rd part code.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmEndOfDxeHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
)
{
EFI_STATUS Status;
EFI_HANDLE MmHandle;
DEBUG ((DEBUG_INFO, "MmEndOfDxeHandler\n"));
//
// Install MM EndOfDxe protocol
//
MmHandle = NULL;
Status = MmInstallProtocolInterface (
&MmHandle,
&gEfiMmEndOfDxeProtocolGuid,
EFI_NATIVE_INTERFACE,
NULL
);
return Status;
}
/**
The main entry point to MM Foundation.
Note: This function is only used by MMRAM invocation. It is never used by DXE invocation.
@param MmEntryContext Processor information and functionality
needed by MM Foundation.
**/
VOID
EFIAPI
MmEntryPoint (
IN CONST EFI_MM_ENTRY_CONTEXT *MmEntryContext
)
{
EFI_STATUS Status;
EFI_MM_COMMUNICATE_HEADER *CommunicateHeader;
BOOLEAN InLegacyBoot;
DEBUG ((DEBUG_INFO, "MmEntryPoint ...\n"));
//
// Update MMST using the context
//
CopyMem (&gMmCoreMmst.MmStartupThisAp, MmEntryContext, sizeof (EFI_MM_ENTRY_CONTEXT));
//
// Call platform hook before Mm Dispatch
//
//PlatformHookBeforeMmDispatch ();
//
// If a legacy boot has occured, then make sure gMmCorePrivate is not accessed
//
InLegacyBoot = mInLegacyBoot;
if (!InLegacyBoot) {
//
// TBD: Mark the InMm flag as TRUE
//
gMmCorePrivate->InMm = TRUE;
//
// Check to see if this is a Synchronous MMI sent through the MM Communication
// Protocol or an Asynchronous MMI
//
if (gMmCorePrivate->CommunicationBuffer != 0) {
//
// Synchronous MMI for MM Core or request from Communicate protocol
//
if (!MmIsBufferOutsideMmValid ((UINTN)gMmCorePrivate->CommunicationBuffer, gMmCorePrivate->BufferSize)) {
//
// If CommunicationBuffer is not in valid address scope, return EFI_INVALID_PARAMETER
//
gMmCorePrivate->CommunicationBuffer = 0;
gMmCorePrivate->ReturnStatus = EFI_INVALID_PARAMETER;
} else {
CommunicateHeader = (EFI_MM_COMMUNICATE_HEADER *)(UINTN)gMmCorePrivate->CommunicationBuffer;
gMmCorePrivate->BufferSize -= OFFSET_OF (EFI_MM_COMMUNICATE_HEADER, Data);
Status = MmiManage (
&CommunicateHeader->HeaderGuid,
NULL,
CommunicateHeader->Data,
(UINTN *)&gMmCorePrivate->BufferSize
);
//
// Update CommunicationBuffer, BufferSize and ReturnStatus
// Communicate service finished, reset the pointer to CommBuffer to NULL
//
gMmCorePrivate->BufferSize += OFFSET_OF (EFI_MM_COMMUNICATE_HEADER, Data);
gMmCorePrivate->CommunicationBuffer = 0;
gMmCorePrivate->ReturnStatus = (Status == EFI_SUCCESS) ? EFI_SUCCESS : EFI_NOT_FOUND;
}
}
}
//
// Process Asynchronous MMI sources
//
MmiManage (NULL, NULL, NULL, NULL);
//
// TBD: Do not use private data structure ?
//
//
// If a legacy boot has occured, then make sure gMmCorePrivate is not accessed
//
if (!InLegacyBoot) {
//
// Clear the InMm flag as we are going to leave MM
//
gMmCorePrivate->InMm = FALSE;
}
DEBUG ((DEBUG_INFO, "MmEntryPoint Done\n"));
}
EFI_STATUS
EFIAPI
MmConfigurationMmNotify (
IN CONST EFI_GUID *Protocol,
IN VOID *Interface,
IN EFI_HANDLE Handle
)
{
EFI_STATUS Status;
EFI_MM_CONFIGURATION_PROTOCOL *MmConfiguration;
DEBUG ((DEBUG_INFO, "MmConfigurationMmNotify(%g) - %x\n", Protocol, Interface));
MmConfiguration = Interface;
//
// Register the MM Entry Point provided by the MM Core with the MM COnfiguration protocol
//
Status = MmConfiguration->RegisterMmEntry (MmConfiguration, (EFI_MM_ENTRY_POINT)(UINTN)gMmCorePrivate->MmEntryPoint);
ASSERT_EFI_ERROR (Status);
//
// Set flag to indicate that the MM Entry Point has been registered which
// means that MMIs are now fully operational.
//
gMmCorePrivate->MmEntryPointRegistered = TRUE;
//
// Print debug message showing MM Core entry point address.
//
DEBUG ((DEBUG_INFO, "MM Core registered MM Entry Point address %p\n", (VOID *)(UINTN)gMmCorePrivate->MmEntryPoint));
return EFI_SUCCESS;
}
UINTN
GetHobListSize (
IN VOID *HobStart
)
{
EFI_PEI_HOB_POINTERS Hob;
ASSERT (HobStart != NULL);
Hob.Raw = (UINT8 *) HobStart;
while (!END_OF_HOB_LIST (Hob)) {
Hob.Raw = GET_NEXT_HOB (Hob);
}
//
// Need plus END_OF_HOB_LIST
//
return (UINTN)Hob.Raw - (UINTN)HobStart + sizeof (EFI_HOB_GENERIC_HEADER);
}
/**
The Entry Point for MM Core
Install DXE Protocols and reload MM Core into MMRAM and register MM Core
EntryPoint on the MMI vector.
Note: This function is called for both DXE invocation and MMRAM invocation.
@param ImageHandle The firmware allocated handle for the EFI image.
@param SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point is executed successfully.
@retval Other Some error occurred when executing this entry point.
**/
EFI_STATUS
EFIAPI
StandaloneMmMain (
IN VOID *HobStart
)
{
EFI_STATUS Status;
UINTN Index;
VOID *MmHobStart;
UINTN HobSize;
VOID *Registration;
EFI_HOB_GUID_TYPE *GuidHob;
MM_CORE_DATA_HOB_DATA *DataInHob;
EFI_HOB_GUID_TYPE *MmramRangesHob;
EFI_MMRAM_HOB_DESCRIPTOR_BLOCK *MmramRangesHobData;
EFI_MMRAM_DESCRIPTOR *MmramRanges;
UINT32 MmramRangeCount;
EFI_HOB_FIRMWARE_VOLUME *BfvHob;
ProcessLibraryConstructorList (HobStart, &gMmCoreMmst);
DEBUG ((DEBUG_INFO, "MmMain - 0x%x\n", HobStart));
//
// Determine if the caller has passed a reference to a MM_CORE_PRIVATE_DATA
// structure in the Hoblist. This choice will govern how boot information is
// extracted later.
//
GuidHob = GetNextGuidHob (&gMmCoreDataHobGuid, HobStart);
if (GuidHob == NULL) {
//
// Allocate and zero memory for a MM_CORE_PRIVATE_DATA table and then
// initialise it
//
gMmCorePrivate = (MM_CORE_PRIVATE_DATA *) AllocateRuntimePages(EFI_SIZE_TO_PAGES(sizeof (MM_CORE_PRIVATE_DATA)));
SetMem ((VOID *)(UINTN)gMmCorePrivate, sizeof (MM_CORE_PRIVATE_DATA), 0);
gMmCorePrivate->Signature = MM_CORE_PRIVATE_DATA_SIGNATURE;
gMmCorePrivate->MmEntryPointRegistered = FALSE;
gMmCorePrivate->InMm = FALSE;
gMmCorePrivate->ReturnStatus = EFI_SUCCESS;
//
// Extract the MMRAM ranges from the MMRAM descriptor HOB
//
MmramRangesHob = GetNextGuidHob (&gEfiMmPeiMmramMemoryReserveGuid, HobStart);
if (MmramRangesHob == NULL)
return EFI_UNSUPPORTED;
MmramRangesHobData = GET_GUID_HOB_DATA (MmramRangesHob);
ASSERT (MmramRangesHobData != NULL);
MmramRanges = MmramRangesHobData->Descriptor;
MmramRangeCount = MmramRangesHobData->NumberOfMmReservedRegions;
ASSERT (MmramRanges);
ASSERT (MmramRangeCount);
//
// Copy the MMRAM ranges into MM_CORE_PRIVATE_DATA table just in case any
// code relies on them being present there
//
gMmCorePrivate->MmramRangeCount = MmramRangeCount;
gMmCorePrivate->MmramRanges =
(EFI_PHYSICAL_ADDRESS)(UINTN)AllocatePool (MmramRangeCount * sizeof (EFI_MMRAM_DESCRIPTOR));
ASSERT (gMmCorePrivate->MmramRanges != 0);
CopyMem (
(VOID *)(UINTN)gMmCorePrivate->MmramRanges,
MmramRanges,
MmramRangeCount * sizeof (EFI_MMRAM_DESCRIPTOR)
);
} else {
DataInHob = GET_GUID_HOB_DATA (GuidHob);
gMmCorePrivate = (MM_CORE_PRIVATE_DATA *)(UINTN)DataInHob->Address;
MmramRanges = (EFI_MMRAM_DESCRIPTOR *)(UINTN)gMmCorePrivate->MmramRanges;
MmramRangeCount = gMmCorePrivate->MmramRangeCount;
}
//
// Print the MMRAM ranges passed by the caller
//
DEBUG ((DEBUG_INFO, "MmramRangeCount - 0x%x\n", MmramRangeCount));
for (Index = 0; Index < MmramRangeCount; Index++) {
DEBUG ((DEBUG_INFO, "MmramRanges[%d]: 0x%016lx - 0x%lx\n", Index,
MmramRanges[Index].CpuStart,
MmramRanges[Index].PhysicalSize));
}
//
// Copy the MMRAM ranges into private MMRAM
//
mMmramRangeCount = MmramRangeCount;
DEBUG ((DEBUG_INFO, "mMmramRangeCount - 0x%x\n", mMmramRangeCount));
mMmramRanges = AllocatePool (mMmramRangeCount * sizeof (EFI_MMRAM_DESCRIPTOR));
DEBUG ((DEBUG_INFO, "mMmramRanges - 0x%x\n", mMmramRanges));
ASSERT (mMmramRanges != NULL);
CopyMem (mMmramRanges, (VOID *)(UINTN)MmramRanges, mMmramRangeCount * sizeof (EFI_MMRAM_DESCRIPTOR));
//
// Get Boot Firmware Volume address from the BFV Hob
//
BfvHob = GetFirstHob (EFI_HOB_TYPE_FV);
if (BfvHob != NULL) {
DEBUG ((DEBUG_INFO, "BFV address - 0x%x\n", BfvHob->BaseAddress));
DEBUG ((DEBUG_INFO, "BFV size - 0x%x\n", BfvHob->Length));
gMmCorePrivate->StandaloneBfvAddress = BfvHob->BaseAddress;
}
gMmCorePrivate->Mmst = (EFI_PHYSICAL_ADDRESS)(UINTN)&gMmCoreMmst;
gMmCorePrivate->MmEntryPoint = (EFI_PHYSICAL_ADDRESS)(UINTN)MmEntryPoint;
//
// No need to initialize memory service.
// It is done in constructor of StandaloneMmCoreMemoryAllocationLib(),
// so that the library linked with StandaloneMmCore can use AllocatePool() in constuctor.
//
DEBUG ((DEBUG_INFO, "MmInstallConfigurationTable For HobList\n"));
//
// Install HobList
//
HobSize = GetHobListSize (HobStart);
DEBUG ((DEBUG_INFO, "HobSize - 0x%x\n", HobSize));
MmHobStart = AllocatePool (HobSize);
DEBUG ((DEBUG_INFO, "MmHobStart - 0x%x\n", MmHobStart));
ASSERT (MmHobStart != NULL);
CopyMem (MmHobStart, HobStart, HobSize);
Status = MmInstallConfigurationTable (&gMmCoreMmst, &gEfiHobListGuid, MmHobStart, HobSize);
ASSERT_EFI_ERROR (Status);
//
// Register notification for EFI_MM_CONFIGURATION_PROTOCOL registration and
// use it to register the MM Foundation entrypoint
//
DEBUG ((DEBUG_INFO, "MmRegisterProtocolNotify - MmConfigurationMmProtocol\n"));
Status = MmRegisterProtocolNotify (
&gEfiMmConfigurationProtocolGuid,
MmConfigurationMmNotify,
&Registration
);
ASSERT_EFI_ERROR (Status);
//
// Dispatch standalone BFV
//
DEBUG ((DEBUG_INFO, "Mm Dispatch StandaloneBfvAddress - 0x%08x\n", gMmCorePrivate->StandaloneBfvAddress));
if (gMmCorePrivate->StandaloneBfvAddress != 0) {
MmCoreFfsFindMmDriver ((EFI_FIRMWARE_VOLUME_HEADER *)(UINTN)gMmCorePrivate->StandaloneBfvAddress);
MmDispatcher ();
}
//
// Register all handlers in the core table
//
for (Index = 0; mMmCoreMmiHandlers[Index].HandlerType != NULL; Index++) {
Status = MmiHandlerRegister (
mMmCoreMmiHandlers[Index].Handler,
mMmCoreMmiHandlers[Index].HandlerType,
&mMmCoreMmiHandlers[Index].DispatchHandle
);
DEBUG ((DEBUG_INFO, "MmiHandlerRegister - GUID %g - Status %d\n", mMmCoreMmiHandlers[Index].HandlerType, Status));
}
DEBUG ((DEBUG_INFO, "MmMain Done!\n"));
return EFI_SUCCESS;
}

View File

@ -0,0 +1,903 @@
/** @file
The internal header file includes the common header files, defines
internal structure and functions used by MmCore module.
Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _MM_CORE_H_
#define _MM_CORE_H_
#include <PiMm.h>
#include <StandaloneMm.h>
#include <Protocol/DxeMmReadyToLock.h>
#include <Protocol/MmReadyToLock.h>
#include <Protocol/MmEndOfDxe.h>
#include <Protocol/MmCommunication.h>
#include <Protocol/LoadedImage.h>
#include <Protocol/MmConfiguration.h>
#include <Guid/Apriori.h>
#include <Guid/EventGroup.h>
#include <Guid/EventLegacyBios.h>
#include <Guid/ZeroGuid.h>
#include <Guid/MemoryProfile.h>
#include <Guid/HobList.h>
#include <Guid/MmFvDispatch.h>
#include <Guid/MmramMemoryReserve.h>
#include <Library/StandaloneMmCoreEntryPoint.h>
#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/PeCoffLib.h>
#include <Library/CacheMaintenanceLib.h>
#include <Library/DebugLib.h>
#include <Library/ReportStatusCodeLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/PcdLib.h>
#include <Library/StandaloneMmMemLib.h>
#include <Library/HobLib.h>
#include "StandaloneMmCorePrivateData.h"
//
// Used to build a table of MMI Handlers that the MM Core registers
//
typedef struct {
EFI_MM_HANDLER_ENTRY_POINT Handler;
EFI_GUID *HandlerType;
EFI_HANDLE DispatchHandle;
BOOLEAN UnRegister;
} MM_CORE_MMI_HANDLERS;
//
// Structure for recording the state of an MM Driver
//
#define EFI_MM_DRIVER_ENTRY_SIGNATURE SIGNATURE_32('s', 'd','r','v')
typedef struct {
UINTN Signature;
LIST_ENTRY Link; // mDriverList
LIST_ENTRY ScheduledLink; // mScheduledQueue
EFI_HANDLE FvHandle;
EFI_GUID FileName;
VOID *Pe32Data;
UINTN Pe32DataSize;
VOID *Depex;
UINTN DepexSize;
BOOLEAN Before;
BOOLEAN After;
EFI_GUID BeforeAfterGuid;
BOOLEAN Dependent;
BOOLEAN Scheduled;
BOOLEAN Initialized;
BOOLEAN DepexProtocolError;
EFI_HANDLE ImageHandle;
EFI_LOADED_IMAGE_PROTOCOL *LoadedImage;
//
// Image EntryPoint in MMRAM
//
PHYSICAL_ADDRESS ImageEntryPoint;
//
// Image Buffer in MMRAM
//
PHYSICAL_ADDRESS ImageBuffer;
//
// Image Page Number
//
UINTN NumberOfPage;
} EFI_MM_DRIVER_ENTRY;
#define EFI_HANDLE_SIGNATURE SIGNATURE_32('h','n','d','l')
///
/// IHANDLE - contains a list of protocol handles
///
typedef struct {
UINTN Signature;
/// All handles list of IHANDLE
LIST_ENTRY AllHandles;
/// List of PROTOCOL_INTERFACE's for this handle
LIST_ENTRY Protocols;
UINTN LocateRequest;
} IHANDLE;
#define ASSERT_IS_HANDLE(a) ASSERT((a)->Signature == EFI_HANDLE_SIGNATURE)
#define PROTOCOL_ENTRY_SIGNATURE SIGNATURE_32('p','r','t','e')
///
/// PROTOCOL_ENTRY - each different protocol has 1 entry in the protocol
/// database. Each handler that supports this protocol is listed, along
/// with a list of registered notifies.
///
typedef struct {
UINTN Signature;
/// Link Entry inserted to mProtocolDatabase
LIST_ENTRY AllEntries;
/// ID of the protocol
EFI_GUID ProtocolID;
/// All protocol interfaces
LIST_ENTRY Protocols;
/// Registerd notification handlers
LIST_ENTRY Notify;
} PROTOCOL_ENTRY;
#define PROTOCOL_INTERFACE_SIGNATURE SIGNATURE_32('p','i','f','c')
///
/// PROTOCOL_INTERFACE - each protocol installed on a handle is tracked
/// with a protocol interface structure
///
typedef struct {
UINTN Signature;
/// Link on IHANDLE.Protocols
LIST_ENTRY Link;
/// Back pointer
IHANDLE *Handle;
/// Link on PROTOCOL_ENTRY.Protocols
LIST_ENTRY ByProtocol;
/// The protocol ID
PROTOCOL_ENTRY *Protocol;
/// The interface value
VOID *Interface;
} PROTOCOL_INTERFACE;
#define PROTOCOL_NOTIFY_SIGNATURE SIGNATURE_32('p','r','t','n')
///
/// PROTOCOL_NOTIFY - used for each register notification for a protocol
///
typedef struct {
UINTN Signature;
PROTOCOL_ENTRY *Protocol;
/// All notifications for this protocol
LIST_ENTRY Link;
/// Notification function
EFI_MM_NOTIFY_FN Function;
/// Last position notified
LIST_ENTRY *Position;
} PROTOCOL_NOTIFY;
//
// MM Core Global Variables
//
extern MM_CORE_PRIVATE_DATA *gMmCorePrivate;
extern EFI_MM_SYSTEM_TABLE gMmCoreMmst;
extern LIST_ENTRY gHandleList;
extern EFI_PHYSICAL_ADDRESS gLoadModuleAtFixAddressMmramBase;
/**
Called to initialize the memory service.
@param MmramRangeCount Number of MMRAM Regions
@param MmramRanges Pointer to MMRAM Descriptors
**/
VOID
MmInitializeMemoryServices (
IN UINTN MmramRangeCount,
IN EFI_MMRAM_DESCRIPTOR *MmramRanges
);
/**
The MmInstallConfigurationTable() function is used to maintain the list
of configuration tables that are stored in the System Management System
Table. The list is stored as an array of (GUID, Pointer) pairs. The list
must be allocated from pool memory with PoolType set to EfiRuntimeServicesData.
@param SystemTable A pointer to the MM System Table (SMST).
@param Guid A pointer to the GUID for the entry to add, update, or remove.
@param Table A pointer to the buffer of the table to add.
@param TableSize The size of the table to install.
@retval EFI_SUCCESS The (Guid, Table) pair was added, updated, or removed.
@retval EFI_INVALID_PARAMETER Guid is not valid.
@retval EFI_NOT_FOUND An attempt was made to delete a non-existent entry.
@retval EFI_OUT_OF_RESOURCES There is not enough memory available to complete the operation.
**/
EFI_STATUS
EFIAPI
MmInstallConfigurationTable (
IN CONST EFI_MM_SYSTEM_TABLE *SystemTable,
IN CONST EFI_GUID *Guid,
IN VOID *Table,
IN UINTN TableSize
);
/**
Wrapper function to MmInstallProtocolInterfaceNotify. This is the public API which
Calls the private one which contains a BOOLEAN parameter for notifications
@param UserHandle The handle to install the protocol handler on,
or NULL if a new handle is to be allocated
@param Protocol The protocol to add to the handle
@param InterfaceType Indicates whether Interface is supplied in
native form.
@param Interface The interface for the protocol being added
@return Status code
**/
EFI_STATUS
EFIAPI
MmInstallProtocolInterface (
IN OUT EFI_HANDLE *UserHandle,
IN EFI_GUID *Protocol,
IN EFI_INTERFACE_TYPE InterfaceType,
IN VOID *Interface
);
/**
Allocates pages from the memory map.
@param Type The type of allocation to perform
@param MemoryType The type of memory to turn the allocated pages
into
@param NumberOfPages The number of pages to allocate
@param Memory A pointer to receive the base allocated memory
address
@retval EFI_INVALID_PARAMETER Parameters violate checking rules defined in spec.
@retval EFI_NOT_FOUND Could not allocate pages match the requirement.
@retval EFI_OUT_OF_RESOURCES No enough pages to allocate.
@retval EFI_SUCCESS Pages successfully allocated.
**/
EFI_STATUS
EFIAPI
MmAllocatePages (
IN EFI_ALLOCATE_TYPE Type,
IN EFI_MEMORY_TYPE MemoryType,
IN UINTN NumberOfPages,
OUT EFI_PHYSICAL_ADDRESS *Memory
);
/**
Allocates pages from the memory map.
@param Type The type of allocation to perform
@param MemoryType The type of memory to turn the allocated pages
into
@param NumberOfPages The number of pages to allocate
@param Memory A pointer to receive the base allocated memory
address
@retval EFI_INVALID_PARAMETER Parameters violate checking rules defined in spec.
@retval EFI_NOT_FOUND Could not allocate pages match the requirement.
@retval EFI_OUT_OF_RESOURCES No enough pages to allocate.
@retval EFI_SUCCESS Pages successfully allocated.
**/
EFI_STATUS
EFIAPI
MmInternalAllocatePages (
IN EFI_ALLOCATE_TYPE Type,
IN EFI_MEMORY_TYPE MemoryType,
IN UINTN NumberOfPages,
OUT EFI_PHYSICAL_ADDRESS *Memory
);
/**
Frees previous allocated pages.
@param Memory Base address of memory being freed
@param NumberOfPages The number of pages to free
@retval EFI_NOT_FOUND Could not find the entry that covers the range
@retval EFI_INVALID_PARAMETER Address not aligned, Address is zero or NumberOfPages is zero.
@return EFI_SUCCESS Pages successfully freed.
**/
EFI_STATUS
EFIAPI
MmFreePages (
IN EFI_PHYSICAL_ADDRESS Memory,
IN UINTN NumberOfPages
);
/**
Frees previous allocated pages.
@param Memory Base address of memory being freed
@param NumberOfPages The number of pages to free
@retval EFI_NOT_FOUND Could not find the entry that covers the range
@retval EFI_INVALID_PARAMETER Address not aligned, Address is zero or NumberOfPages is zero.
@return EFI_SUCCESS Pages successfully freed.
**/
EFI_STATUS
EFIAPI
MmInternalFreePages (
IN EFI_PHYSICAL_ADDRESS Memory,
IN UINTN NumberOfPages
);
/**
Allocate pool of a particular type.
@param PoolType Type of pool to allocate
@param Size The amount of pool to allocate
@param Buffer The address to return a pointer to the allocated
pool
@retval EFI_INVALID_PARAMETER PoolType not valid
@retval EFI_OUT_OF_RESOURCES Size exceeds max pool size or allocation failed.
@retval EFI_SUCCESS Pool successfully allocated.
**/
EFI_STATUS
EFIAPI
MmAllocatePool (
IN EFI_MEMORY_TYPE PoolType,
IN UINTN Size,
OUT VOID **Buffer
);
/**
Allocate pool of a particular type.
@param PoolType Type of pool to allocate
@param Size The amount of pool to allocate
@param Buffer The address to return a pointer to the allocated
pool
@retval EFI_INVALID_PARAMETER PoolType not valid
@retval EFI_OUT_OF_RESOURCES Size exceeds max pool size or allocation failed.
@retval EFI_SUCCESS Pool successfully allocated.
**/
EFI_STATUS
EFIAPI
MmInternalAllocatePool (
IN EFI_MEMORY_TYPE PoolType,
IN UINTN Size,
OUT VOID **Buffer
);
/**
Frees pool.
@param Buffer The allocated pool entry to free
@retval EFI_INVALID_PARAMETER Buffer is not a valid value.
@retval EFI_SUCCESS Pool successfully freed.
**/
EFI_STATUS
EFIAPI
MmFreePool (
IN VOID *Buffer
);
/**
Frees pool.
@param Buffer The allocated pool entry to free
@retval EFI_INVALID_PARAMETER Buffer is not a valid value.
@retval EFI_SUCCESS Pool successfully freed.
**/
EFI_STATUS
EFIAPI
MmInternalFreePool (
IN VOID *Buffer
);
/**
Installs a protocol interface into the boot services environment.
@param UserHandle The handle to install the protocol handler on,
or NULL if a new handle is to be allocated
@param Protocol The protocol to add to the handle
@param InterfaceType Indicates whether Interface is supplied in
native form.
@param Interface The interface for the protocol being added
@param Notify indicates whether notify the notification list
for this protocol
@retval EFI_INVALID_PARAMETER Invalid parameter
@retval EFI_OUT_OF_RESOURCES No enough buffer to allocate
@retval EFI_SUCCESS Protocol interface successfully installed
**/
EFI_STATUS
MmInstallProtocolInterfaceNotify (
IN OUT EFI_HANDLE *UserHandle,
IN EFI_GUID *Protocol,
IN EFI_INTERFACE_TYPE InterfaceType,
IN VOID *Interface,
IN BOOLEAN Notify
);
/**
Uninstalls all instances of a protocol:interfacer from a handle.
If the last protocol interface is remove from the handle, the
handle is freed.
@param UserHandle The handle to remove the protocol handler from
@param Protocol The protocol, of protocol:interface, to remove
@param Interface The interface, of protocol:interface, to remove
@retval EFI_INVALID_PARAMETER Protocol is NULL.
@retval EFI_SUCCESS Protocol interface successfully uninstalled.
**/
EFI_STATUS
EFIAPI
MmUninstallProtocolInterface (
IN EFI_HANDLE UserHandle,
IN EFI_GUID *Protocol,
IN VOID *Interface
);
/**
Queries a handle to determine if it supports a specified protocol.
@param UserHandle The handle being queried.
@param Protocol The published unique identifier of the protocol.
@param Interface Supplies the address where a pointer to the
corresponding Protocol Interface is returned.
@return The requested protocol interface for the handle
**/
EFI_STATUS
EFIAPI
MmHandleProtocol (
IN EFI_HANDLE UserHandle,
IN EFI_GUID *Protocol,
OUT VOID **Interface
);
/**
Add a new protocol notification record for the request protocol.
@param Protocol The requested protocol to add the notify
registration
@param Function Points to the notification function
@param Registration Returns the registration record
@retval EFI_INVALID_PARAMETER Invalid parameter
@retval EFI_SUCCESS Successfully returned the registration record
that has been added
**/
EFI_STATUS
EFIAPI
MmRegisterProtocolNotify (
IN CONST EFI_GUID *Protocol,
IN EFI_MM_NOTIFY_FN Function,
OUT VOID **Registration
);
/**
Locates the requested handle(s) and returns them in Buffer.
@param SearchType The type of search to perform to locate the
handles
@param Protocol The protocol to search for
@param SearchKey Dependant on SearchType
@param BufferSize On input the size of Buffer. On output the
size of data returned.
@param Buffer The buffer to return the results in
@retval EFI_BUFFER_TOO_SMALL Buffer too small, required buffer size is
returned in BufferSize.
@retval EFI_INVALID_PARAMETER Invalid parameter
@retval EFI_SUCCESS Successfully found the requested handle(s) and
returns them in Buffer.
**/
EFI_STATUS
EFIAPI
MmLocateHandle (
IN EFI_LOCATE_SEARCH_TYPE SearchType,
IN EFI_GUID *Protocol OPTIONAL,
IN VOID *SearchKey OPTIONAL,
IN OUT UINTN *BufferSize,
OUT EFI_HANDLE *Buffer
);
/**
Return the first Protocol Interface that matches the Protocol GUID. If
Registration is pasased in return a Protocol Instance that was just add
to the system. If Retistration is NULL return the first Protocol Interface
you find.
@param Protocol The protocol to search for
@param Registration Optional Registration Key returned from
RegisterProtocolNotify()
@param Interface Return the Protocol interface (instance).
@retval EFI_SUCCESS If a valid Interface is returned
@retval EFI_INVALID_PARAMETER Invalid parameter
@retval EFI_NOT_FOUND Protocol interface not found
**/
EFI_STATUS
EFIAPI
MmLocateProtocol (
IN EFI_GUID *Protocol,
IN VOID *Registration OPTIONAL,
OUT VOID **Interface
);
/**
Manage MMI of a particular type.
@param HandlerType Points to the handler type or NULL for root MMI handlers.
@param Context Points to an optional context buffer.
@param CommBuffer Points to the optional communication buffer.
@param CommBufferSize Points to the size of the optional communication buffer.
@retval EFI_SUCCESS Interrupt source was processed successfully but not quiesced.
@retval EFI_INTERRUPT_PENDING One or more MMI sources could not be quiesced.
@retval EFI_WARN_INTERRUPT_SOURCE_PENDING Interrupt source was not handled or quiesced.
@retval EFI_WARN_INTERRUPT_SOURCE_QUIESCED Interrupt source was handled and quiesced.
**/
EFI_STATUS
EFIAPI
MmiManage (
IN CONST EFI_GUID *HandlerType,
IN CONST VOID *Context OPTIONAL,
IN OUT VOID *CommBuffer OPTIONAL,
IN OUT UINTN *CommBufferSize OPTIONAL
);
/**
Registers a handler to execute within MM.
@param Handler Handler service funtion pointer.
@param HandlerType Points to the handler type or NULL for root MMI handlers.
@param DispatchHandle On return, contains a unique handle which can be used to later unregister the handler function.
@retval EFI_SUCCESS Handler register success.
@retval EFI_INVALID_PARAMETER Handler or DispatchHandle is NULL.
**/
EFI_STATUS
EFIAPI
MmiHandlerRegister (
IN EFI_MM_HANDLER_ENTRY_POINT Handler,
IN CONST EFI_GUID *HandlerType OPTIONAL,
OUT EFI_HANDLE *DispatchHandle
);
/**
Unregister a handler in MM.
@param DispatchHandle The handle that was specified when the handler was registered.
@retval EFI_SUCCESS Handler function was successfully unregistered.
@retval EFI_INVALID_PARAMETER DispatchHandle does not refer to a valid handle.
**/
EFI_STATUS
EFIAPI
MmiHandlerUnRegister (
IN EFI_HANDLE DispatchHandle
);
/**
This function is the main entry point for an MM handler dispatch
or communicate-based callback.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmDriverDispatchHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
);
/**
This function is the main entry point for an MM handler dispatch
or communicate-based callback.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmFvDispatchHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
);
/**
This function is the main entry point for an MM handler dispatch
or communicate-based callback.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmLegacyBootHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
);
/**
This function is the main entry point for an MM handler dispatch
or communicate-based callback.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmExitBootServiceHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
);
/**
This function is the main entry point for an MM handler dispatch
or communicate-based callback.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmReadyToBootHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
);
/**
This function is the main entry point for an MM handler dispatch
or communicate-based callback.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmReadyToLockHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
);
/**
This function is the main entry point for an MM handler dispatch
or communicate-based callback.
@param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
@param Context Points to an optional handler context which was specified when the handler was registered.
@param CommBuffer A pointer to a collection of data in memory that will
be conveyed from a non-MM environment into an MM environment.
@param CommBufferSize The size of the CommBuffer.
@return Status Code
**/
EFI_STATUS
EFIAPI
MmEndOfDxeHandler (
IN EFI_HANDLE DispatchHandle,
IN CONST VOID *Context, OPTIONAL
IN OUT VOID *CommBuffer, OPTIONAL
IN OUT UINTN *CommBufferSize OPTIONAL
);
/**
Place holder function until all the MM System Table Service are available.
@param Arg1 Undefined
@param Arg2 Undefined
@param Arg3 Undefined
@param Arg4 Undefined
@param Arg5 Undefined
@return EFI_NOT_AVAILABLE_YET
**/
EFI_STATUS
EFIAPI
MmEfiNotAvailableYetArg5 (
UINTN Arg1,
UINTN Arg2,
UINTN Arg3,
UINTN Arg4,
UINTN Arg5
);
//
//Functions used during debug buils
//
/**
Traverse the discovered list for any drivers that were discovered but not loaded
because the dependency expressions evaluated to false.
**/
VOID
MmDisplayDiscoveredNotDispatched (
VOID
);
/**
Add free MMRAM region for use by memory service.
@param MemBase Base address of memory region.
@param MemLength Length of the memory region.
@param Type Memory type.
@param Attributes Memory region state.
**/
VOID
MmAddMemoryRegion (
IN EFI_PHYSICAL_ADDRESS MemBase,
IN UINT64 MemLength,
IN EFI_MEMORY_TYPE Type,
IN UINT64 Attributes
);
/**
Finds the protocol entry for the requested protocol.
@param Protocol The ID of the protocol
@param Create Create a new entry if not found
@return Protocol entry
**/
PROTOCOL_ENTRY *
MmFindProtocolEntry (
IN EFI_GUID *Protocol,
IN BOOLEAN Create
);
/**
Signal event for every protocol in protocol entry.
@param Prot Protocol interface
**/
VOID
MmNotifyProtocol (
IN PROTOCOL_INTERFACE *Prot
);
/**
Finds the protocol instance for the requested handle and protocol.
Note: This function doesn't do parameters checking, it's caller's responsibility
to pass in valid parameters.
@param Handle The handle to search the protocol on
@param Protocol GUID of the protocol
@param Interface The interface for the protocol being searched
@return Protocol instance (NULL: Not found)
**/
PROTOCOL_INTERFACE *
MmFindProtocolInterface (
IN IHANDLE *Handle,
IN EFI_GUID *Protocol,
IN VOID *Interface
);
/**
Removes Protocol from the protocol list (but not the handle list).
@param Handle The handle to remove protocol on.
@param Protocol GUID of the protocol to be moved
@param Interface The interface of the protocol
@return Protocol Entry
**/
PROTOCOL_INTERFACE *
MmRemoveInterfaceFromProtocol (
IN IHANDLE *Handle,
IN EFI_GUID *Protocol,
IN VOID *Interface
);
/**
This is the POSTFIX version of the dependency evaluator. This code does
not need to handle Before or After, as it is not valid to call this
routine in this case. POSTFIX means all the math is done on top of the stack.
@param DriverEntry DriverEntry element to update.
@retval TRUE If driver is ready to run.
@retval FALSE If driver is not ready to run or some fatal error
was found.
**/
BOOLEAN
MmIsSchedulable (
IN EFI_MM_DRIVER_ENTRY *DriverEntry
);
/**
Dump MMRAM information.
**/
VOID
DumpMmramInfo (
VOID
);
extern UINTN mMmramRangeCount;
extern EFI_MMRAM_DESCRIPTOR *mMmramRanges;
extern EFI_SYSTEM_TABLE *mEfiSystemTable;
#endif

View File

@ -0,0 +1,80 @@
## @file
# This module provide an SMM CIS compliant implementation of SMM Core.
#
# Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR>
# Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
[Defines]
INF_VERSION = 0x0001001A
BASE_NAME = StandaloneMmCore
FILE_GUID = 6E14B6FD-3600-4DD6-A17A-206B3B6DCE16
MODULE_TYPE = MM_CORE_STANDALONE
VERSION_STRING = 1.0
PI_SPECIFICATION_VERSION = 0x00010032
ENTRY_POINT = StandaloneMmMain
# VALID_ARCHITECTURES = IA32 X64 AARCH64
[Sources]
StandaloneMmCore.c
StandaloneMmCore.h
StandaloneMmCorePrivateData.h
Page.c
Pool.c
Handle.c
Locate.c
Notify.c
Dependency.c
Dispatcher.c
Mmi.c
InstallConfigurationTable.c
FwVol.c
[Packages]
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
StandaloneMmPkg/StandaloneMmPkg.dec
[LibraryClasses]
BaseLib
BaseMemoryLib
CacheMaintenanceLib
DebugLib
FvLib
HobLib
MemoryAllocationLib
MemLib
PeCoffLib
ReportStatusCodeLib
StandaloneMmCoreEntryPoint
[Protocols]
gEfiDxeMmReadyToLockProtocolGuid ## UNDEFINED # SmiHandlerRegister
gEfiMmReadyToLockProtocolGuid ## PRODUCES
gEfiMmEndOfDxeProtocolGuid ## PRODUCES
gEfiLoadedImageProtocolGuid ## PRODUCES
gEfiMmConfigurationProtocolGuid ## CONSUMES
[Guids]
gAprioriGuid ## SOMETIMES_CONSUMES ## File
gEfiEventDxeDispatchGuid ## PRODUCES ## GUID # SmiHandlerRegister
gEfiEndOfDxeEventGroupGuid ## PRODUCES ## GUID # SmiHandlerRegister
## SOMETIMES_CONSUMES ## GUID # Locate protocol
## SOMETIMES_PRODUCES ## GUID # SmiHandlerRegister
gEdkiiMemoryProfileGuid
gZeroGuid ## SOMETIMES_CONSUMES ## GUID
gEfiHobListGuid
gMmCoreDataHobGuid
gMmFvDispatchGuid
gEfiEventLegacyBootGuid
gEfiEventExitBootServicesGuid
gEfiEventReadyToBootGuid

View File

@ -0,0 +1,66 @@
/** @file
The internal header file that declared a data structure that is shared
between the MM IPL and the MM Core.
Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _STANDALONE_MM_CORE_PRIVATE_DATA_H_
#define _STANDALONE_MM_CORE_PRIVATE_DATA_H_
#include <Guid/MmCoreData.h>
//
// Page management
//
typedef struct {
LIST_ENTRY Link;
UINTN NumberOfPages;
} FREE_PAGE_LIST;
extern LIST_ENTRY mMmMemoryMap;
//
// Pool management
//
//
// MIN_POOL_SHIFT must not be less than 5
//
#define MIN_POOL_SHIFT 6
#define MIN_POOL_SIZE (1 << MIN_POOL_SHIFT)
//
// MAX_POOL_SHIFT must not be less than EFI_PAGE_SHIFT - 1
//
#define MAX_POOL_SHIFT (EFI_PAGE_SHIFT - 1)
#define MAX_POOL_SIZE (1 << MAX_POOL_SHIFT)
//
// MAX_POOL_INDEX are calculated by maximum and minimum pool sizes
//
#define MAX_POOL_INDEX (MAX_POOL_SHIFT - MIN_POOL_SHIFT + 1)
typedef struct {
UINTN Size;
BOOLEAN Available;
} POOL_HEADER;
typedef struct {
POOL_HEADER Header;
LIST_ENTRY Link;
} FREE_POOL_HEADER;
extern LIST_ENTRY mMmPoolLists[MAX_POOL_INDEX];
#endif

View File

@ -0,0 +1,39 @@
/** @file
GUIDs for MM Event.
Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __MM_FV_DISPATCH_H__
#define __MM_FV_DISPATCH_H__
#define MM_FV_DISPATCH_GUID \
{ 0xb65694cc, 0x9e3, 0x4c3b, { 0xb5, 0xcd, 0x5, 0xf4, 0x4d, 0x3c, 0xdb, 0xff }}
extern EFI_GUID gMmFvDispatchGuid;
#pragma pack(1)
typedef struct {
EFI_PHYSICAL_ADDRESS Address;
UINT64 Size;
} EFI_MM_COMMUNICATE_FV_DISPATCH_DATA;
typedef struct {
EFI_GUID HeaderGuid;
UINTN MessageLength;
EFI_MM_COMMUNICATE_FV_DISPATCH_DATA Data;
} EFI_MM_COMMUNICATE_FV_DISPATCH;
#pragma pack()
#endif

View File

@ -0,0 +1,101 @@
/** @file
Module entry point library for STANDALONE MM core.
Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __MODULE_ENTRY_POINT_H__
#define __MODULE_ENTRY_POINT_H__
///
/// Global variable that contains a pointer to the Hob List passed into the STANDALONE MM Core entry point.
///
extern VOID *gHobList;
/**
The entry point of PE/COFF Image for the STANDALONE MM Core.
This function is the entry point for the STANDALONE MM Core. This function is required to call
ProcessModuleEntryPointList() and ProcessModuleEntryPointList() is never expected to return.
The STANDALONE MM Core is responsible for calling ProcessLibraryConstructorList() as soon as the EFI
System Table and the image handle for the STANDALONE MM Core itself have been established.
If ProcessModuleEntryPointList() returns, then ASSERT() and halt the system.
@param HobStart Pointer to the beginning of the HOB List passed in from the PEI Phase.
**/
VOID
EFIAPI
_ModuleEntryPoint (
IN VOID *HobStart
);
/**
Required by the EBC compiler and identical in functionality to _ModuleEntryPoint().
This function is required to call _ModuleEntryPoint() passing in HobStart.
@param HobStart Pointer to the beginning of the HOB List passed in from the PEI Phase.
**/
VOID
EFIAPI
EfiMain (
IN VOID *HobStart
);
/**
Auto generated function that calls the library constructors for all of the module's dependent libraries.
This function must be called by _ModuleEntryPoint().
This function calls the set of library constructors for the set of library instances
that a module depends on. This includes library instances that a module depends on
directly and library instances that a module depends on indirectly through other
libraries. This function is auto generated by build tools and those build tools are
responsible for collecting the set of library instances, determine which ones have
constructors, and calling the library constructors in the proper order based upon
each of the library instances own dependencies.
@param ImageHandle The image handle of the STANDALONE MM Core.
@param SystemTable A pointer to the EFI System Table.
**/
VOID
EFIAPI
ProcessLibraryConstructorList (
IN EFI_HANDLE ImageHandle,
IN EFI_MM_SYSTEM_TABLE *MmSystemTable
);
/**
Autogenerated function that calls a set of module entry points.
This function must be called by _ModuleEntryPoint().
This function calls the set of module entry points.
This function is auto generated by build tools and those build tools are responsible
for collecting the module entry points and calling them in a specified order.
@param HobStart Pointer to the beginning of the HOB List passed in from the PEI Phase.
**/
VOID
EFIAPI
ProcessModuleEntryPointList (
IN VOID *HobStart
);
#endif

View File

@ -0,0 +1,36 @@
/** @file
Standalone MM.
Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _STANDALONE_MM_H_
#define _STANDALONE_MM_H_
#include <PiMm.h>
typedef
EFI_STATUS
(EFIAPI *MM_IMAGE_ENTRY_POINT) (
IN EFI_HANDLE ImageHandle,
IN EFI_MM_SYSTEM_TABLE *MmSystemTable
);
typedef
EFI_STATUS
(EFIAPI *STANDALONE_MM_FOUNDATION_ENTRY_POINT) (
IN VOID *HobStart
);
#endif