diff --git a/MdePkg/Include/Library/FvbServiceLib.h b/MdePkg/Include/Library/FvbServiceLib.h
deleted file mode 100644
index a87750a7b4..0000000000
--- a/MdePkg/Include/Library/FvbServiceLib.h
+++ /dev/null
@@ -1,311 +0,0 @@
-/** @file
- Firmeware Volume BLock Service Library
-
- Copyright (c) 2006 - 2007, Intel Corporation.
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef __FVB_SERVICE_LIB_H__
-#define __FVB_SERVICE_LIB_H__
-
-/**
- Reads specified number of bytes into a buffer from the specified block.
-
- The EfiFvbReadBlock() function reads the requested number of bytes from
- the requested block in the specified firmware volume and stores them in
- the provided buffer. Implementations should be mindful that the firmware
- volume might be in the ReadDisabled state. If it is in this state, the
- EfiFvbReadBlock() function must return the status code EFI_ACCESS_DENIED
- without modifying the contents of the buffer.
-
- The EfiFvbReadBlock() function must also prevent spanning block boundaries.
- If a read is requested that would span a block boundary, the read must read
- up to the boundary but not beyond. The output parameter NumBytes must be
- set to correctly indicate the number of bytes actually read.
- The caller must be aware that a read may be partially completed.
-
- If NumBytes is NULL, then ASSERT().
-
- If Buffer is NULL, then ASSERT().
-
- @param[in] Instance The FV instance to be read from.
- @param[in] Lba The logical block address to be read from
- @param[in] Offset The offset relative to the block, at which to begin reading.
- @param[in, out] NumBytes Pointer to a UINTN. On input, *NumBytes contains the total
- size of the buffer. On output, it contains the actual number
- of bytes read.
- @param[out] Buffer Pointer to a caller allocated buffer that will be
- used to hold the data read.
-
- @retval EFI_SUCCESS The firmware volume was read successfully and contents are in Buffer.
- @retval EFI_BAD_BUFFER_SIZE Read attempted across an LBA boundary. On output, NumBytes contains
- the total number of bytes returned in Buffer.
- @retval EFI_ACCESS_DENIED The firmware volume is in the ReadDisabled state.
- @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be read.
- @retval EFI_INVALID_PARAMETER Invalid parameter, Instance is larger than the max FVB number. Lba index
- is larger than the last block of the firmware volume. Offset is larger
- than the block size.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiFvbReadBlock (
- IN UINTN Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- OUT UINT8 *Buffer
- );
-
-
-/**
- Writes specified number of bytes from the input buffer to the block
-
- The EfiFvbWriteBlock() function writes the specified number of bytes
- from the provided buffer to the specified block and offset in the
- requested firmware volume.
-
- If the firmware volume is sticky write, the caller must ensure that
- all the bits of the specified range to write are in the EFI_FVB_ERASE_POLARITY
- state before calling the EfiFvbWriteBlock() function, or else the
- result will be unpredictable. This unpredictability arises because,
- for a sticky-write firmware volume, a write may negate a bit in the
- EFI_FVB_ERASE_POLARITY state but it cannot flip it back again. In
- general, before calling the EfiFvbWriteBlock() function, the caller
- should call the EfiFvbEraseBlock() function first to erase the specified
- block to write. A block erase cycle will transition bits from the
- (NOT)EFI_FVB_ERASE_POLARITY state back to the EFI_FVB_ERASE_POLARITY state.
- Implementations should be mindful that the firmware volume might be
- in the WriteDisabled state. If it is in this state, the EfiFvbWriteBlock()
- function must return the status code EFI_ACCESS_DENIED without modifying
- the contents of the firmware volume.
-
- The EfiFvbWriteBlock() function must also prevent spanning block boundaries.
- If a write is requested that spans a block boundary, the write must store
- up to the boundary but not beyond. The output parameter NumBytes must be
- set to correctly indicate the number of bytes actually written. The caller
- must be aware that a write may be partially completed.
- All writes, partial or otherwise, must be fully flushed to the hardware
- before the EfiFvbWriteBlock() function returns.
-
- If NumBytes is NULL, then ASSERT().
-
- @param Instance The FV instance to be written to
- @param Lba The starting logical block index to write to
- @param Offset The offset relative to the block, at which to begin writting.
- @param NumBytes Pointer to a UINTN. On input, *NumBytes contains
- the total size of the buffer. On output, it contains
- the actual number of bytes written.
- @param Buffer Pointer to a caller allocated buffer that contains
- the source for the write
-
- @retval EFI_SUCCESS The firmware volume was written successfully.
- @retval EFI_BAD_BUFFER_SIZE The write was attempted across an LBA boundary.
- On output, NumBytes contains the total number of bytes actually written.
- @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
- @retval EFI_DEVICE_ERROR The block device is malfunctioning and could not be written.
- @retval EFI_INVALID_PARAMETER Invalid parameter, Instance is larger than the max FVB number.
- Lba index is larger than the last block of the firmware volume.
- Offset is larger than the block size.
-**/
-EFI_STATUS
-EFIAPI
-EfiFvbWriteBlock (
- IN UINTN Instance,
- IN EFI_LBA Lba,
- IN UINTN Offset,
- IN OUT UINTN *NumBytes,
- IN UINT8 *Buffer
- );
-
-
-/**
- Erases and initializes a firmware volume block.
-
- The EfiFvbEraseBlock() function erases one block specified by Lba.
- Implementations should be mindful that the firmware volume might
- be in the WriteDisabled state. If it is in this state, the EfiFvbEraseBlock()
- function must return the status code EFI_ACCESS_DENIED without
- modifying the contents of the firmware volume. If Instance is
- larger than the max FVB number, or Lba index is larger than the
- last block of the firmware volume, this function return the status
- code EFI_INVALID_PARAMETER.
-
- All calls to EfiFvbEraseBlock() must be fully flushed to the
- hardware before this function returns.
-
- @param[in] Instance The FV instance to be erased.
- @param[in] Lba The logical block index to be erased from.
-
- @retval EFI_SUCCESS The erase request was successfully completed.
- @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
- @retval EFI_DEVICE_ERROR The block device is not functioning correctly and
- could not be written. The firmware device may
- have been partially erased.
- @retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max
- FVB number. Lba index is larger than the last block
- of the firmware volume.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiFvbEraseBlock (
- IN UINTN Instance,
- IN EFI_LBA Lba
- );
-
-
-/**
- Retrieves the attributes and current settings of the specified block,
- returns resulting attributes in output parameter.
-
- The EfiFvbGetAttributes() function retrieves the attributes and current
- settings of the block specified by Instance. If Instance is larger than
- the max FVB number, this function returns the status code EFI_INVALID_PARAMETER.
-
- If Attributes is NULL, then ASSERT().
-
- @param[in] Instance The FV instance to be operated.
- @param[out] Attributes Pointer to EFI_FVB_ATTRIBUTES_2 in which the
- attributes and current settings are returned.
-
- @retval EFI_EFI_SUCCESS The firmware volume attributes were returned.
- @retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max FVB number.
-**/
-EFI_STATUS
-EFIAPI
-EfiFvbGetVolumeAttributes (
- IN UINTN Instance,
- OUT EFI_FVB_ATTRIBUTES_2 *Attributes
- );
-
-
-/**
- Modify the attributes and current settings of the specified block
- according to the input parameter.
-
- The EfiFvbSetAttributes() function sets configurable firmware volume
- attributes and returns the new settings of the firmware volume specified
- by Instance. If Instance is larger than the max FVB number, this function
- returns the status code EFI_INVALID_PARAMETER.
-
- If Attributes is NULL, then ASSERT().
-
- @param[in] Instance The FV instance to be operated.
- @param[in, out]Attributes On input, Attributes is a pointer to EFI_FVB_ATTRIBUTES_2
- that contains the desired firmware volume settings.
- On successful return, it contains the new settings of the firmware volume.
-
- @retval EFI_EFI_SUCCESS The firmware volume attributes were modified successfully.
- @retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max FVB number.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiFvbSetVolumeAttributes (
- IN UINTN Instance,
- IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
- );
-
-
-/**
- Retrieves the physical address of the specified memory mapped FV.
-
- Retrieve the base address of a memory-mapped firmware volume specified by Instance.
- If Instance is larger than the max FVB number, this function returns the status
- code EFI_INVALID_PARAMETER.
-
- If BaseAddress is NULL, then ASSERT().
-
- @param[in] Instance The FV instance to be operated.
- @param[out] BaseAddress Pointer to a caller allocated EFI_PHYSICAL_ADDRESS
- that on successful return, contains the base address
- of the firmware volume.
-
- @retval EFI_EFI_SUCCESS The firmware volume base address is returned.
- @retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max FVB number.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiFvbGetPhysicalAddress (
- IN UINTN Instance,
- OUT EFI_PHYSICAL_ADDRESS *BaseAddress
- );
-
-
-/**
- Retrieve the block size of the specified fv.
-
- The EfiFvbGetBlockSize() function retrieves the size of the requested block.
- It also returns the number of additional blocks with the identical size.
- If Instance is larger than the max FVB number, or Lba index is larger than
- the last block of the firmware volume, this function return the status code
- EFI_INVALID_PARAMETER.
-
- If BlockSize is NULL, then ASSERT().
-
- If NumOfBlocks is NULL, then ASSERT().
-
- @param[in] Instance The FV instance to be operated.
- @param[in] Lba Indicates which block to return the size for.
- @param[out] BlockSize Pointer to a caller-allocated UINTN in which the
- size of the block is returned.
- @param[out] NumOfBlocks Pointer to a caller-allocated UINTN in which the
- number of consecutive blocks, starting with Lba,
- is returned. All blocks in this range have a size of BlockSize.
-
- @retval EFI_EFI_SUCCESS The firmware volume base address is returned.
- @retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max FVB number.
- Lba index is larger than the last block of the firmware volume.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiFvbGetBlockSize (
- IN UINTN Instance,
- IN EFI_LBA Lba,
- OUT UINTN *BlockSize,
- OUT UINTN *NumOfBlocks
- );
-
-
-/**
- Erases and initializes a specified range of a firmware volume.
-
- The EfiFvbEraseCustomBlockRange() function erases the specified range in the firmware
- volume index by Instance. If Instance is larger than the max FVB number, StartLba or
- LastLba index is larger than the last block of the firmware volume, StartLba > LastLba
- or StartLba equal to LastLba but OffsetStartLba > OffsetLastLba, this function return
- the status code EFI_INVALID_PARAMETER.
-
- @param[in] Instance The FV instance to be operated.
- @param[in] StartLba The starting logical block index to be erased.
- @param[in] OffsetStartLba Offset into the starting block at which to
- begin erasing.
- @param[in] LastLba The last logical block index to be erased.
- @param[in] OffsetLastLba Offset into the last block at which to end erasing.
-
- @retval EFI_EFI_SUCCESS Successfully erase custom block range
- @retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max FVB number.
- @retval EFI_UNSUPPORTED Firmware volume block device has no this capability.
-
-**/
-EFI_STATUS
-EFIAPI
-EfiFvbEraseCustomBlockRange (
- IN UINTN Instance,
- IN EFI_LBA StartLba,
- IN UINTN OffsetStartLba,
- IN EFI_LBA LastLba,
- IN UINTN OffsetLastLba
- );
-
-#endif
diff --git a/MdePkg/Include/Library/HiiLib.h b/MdePkg/Include/Library/HiiLib.h
deleted file mode 100644
index a92431ab4d..0000000000
--- a/MdePkg/Include/Library/HiiLib.h
+++ /dev/null
@@ -1,500 +0,0 @@
-/** @file
- Public include file for the HII Library
-
- Copyright (c) 2007 - 2008, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef __HII_LIB_H__
-#define __HII_LIB_H__
-
-
-/**
- Assemble EFI_HII_PACKAGE_LIST according to the passed in packages.
-
- If GuidId is NULL, then ASSERT.
- If not enough resource to complete the operation, then ASSERT.
-
- @param NumberOfPackages Number of packages.
- @param GuidId Package GUID.
- @param ... Variable argument list for packages to be assembled.
-
- @return Pointer of EFI_HII_PACKAGE_LIST_HEADER.
-
-**/
-EFI_HII_PACKAGE_LIST_HEADER *
-EFIAPI
-HiiLibPreparePackageList (
- IN UINTN NumberOfPackages,
- IN CONST EFI_GUID *GuidId,
- ...
- );
-
-/**
- This function allocates pool for an EFI_HII_PACKAGE_LIST structure
- with additional space that is big enough to host all packages described by the variable
- argument list of package pointers. The allocated structure is initialized using NumberOfPackages,
- GuidId, and the variable length argument list of package pointers.
-
- Then, EFI_HII_PACKAGE_LIST will be register to the default System HII Database. The
- Handle to the newly registered Package List is returned throught HiiHandle.
-
- If HiiHandle is NULL, then ASSERT.
-
- @param NumberOfPackages The number of HII packages to register.
- @param GuidId Package List GUID ID.
- @param DriverHandle Optional. If not NULL, the DriverHandle on which an instance of DEVICE_PATH_PROTOCOL is installed.
- This DriverHandle uniquely defines the device that the added packages are associated with.
- @param HiiHandle On output, the HiiHandle is update with the handle which can be used to retrieve the Package
- List later. If the functions failed to add the package to the default HII database, this value will
- be set to NULL.
- @param ... The variable argument list describing all HII Package.
-
- @return EFI_SUCCESS If the packages are successfully added to the default HII database.
- @return EFI_OUT_OF_RESOURCE Not enough resource to complete the operation.
-
-**/
-EFI_STATUS
-EFIAPI
-HiiLibAddPackages (
- IN UINTN NumberOfPackages,
- IN CONST EFI_GUID *GuidId,
- IN EFI_HANDLE DriverHandle, OPTIONAL
- OUT EFI_HII_HANDLE *HiiHandle,
- ...
- );
-
-/**
- Removes a package list from the default HII database.
-
- If HiiHandle is NULL, then ASSERT.
- If HiiHandle is not a valid EFI_HII_HANDLE in the default HII database, then ASSERT.
-
- @param HiiHandle The handle that was previously registered to the data base that is requested for removal.
- List later.
-
-**/
-VOID
-EFIAPI
-HiiLibRemovePackages (
- IN EFI_HII_HANDLE HiiHandle
- );
-
-/**
- This function adds the string into String Package of each language
- supported by the package list.
-
- If String is NULL, then ASSERT.
- If StringId is NULL, the ASSERT.
- If PackageList could not be found in the default HII database, then ASSERT.
-
- @param PackageList Handle of the package list where this string will
- be added.
- @param StringId On return, contains the new strings id, which is
- unique within PackageList.
- @param String Points to the new null-terminated string.
-
- @retval EFI_SUCCESS The new string was added successfully.
- @retval EFI_OUT_OF_RESOURCES Could not add the string due to lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-HiiLibNewString (
- IN EFI_HII_HANDLE PackageList,
- OUT EFI_STRING_ID *StringId,
- IN CONST EFI_STRING String
- );
-
-/**
- This function update the specified string in String Package of each language
- supported by the package list.
-
- If String is NULL, then ASSERT.
- If PackageList could not be found in the default HII database, then ASSERT.
- If StringId is not found in PackageList, then ASSERT.
-
- @param PackageList Handle of the package list where this string will
- be added.
- @param StringId Ths String Id to be updated.
- @param String Points to the new null-terminated string.
-
- @retval EFI_SUCCESS The new string was added successfully.
- @retval EFI_OUT_OF_RESOURCES Could not add the string due to lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-HiiLibSetString (
- IN EFI_HII_HANDLE PackageList,
- IN EFI_STRING_ID StringId,
- IN CONST EFI_STRING String
- );
-
-/**
- This function try to retrieve string from String package of current language.
- If fails, it try to retrieve string from String package of first language it support.
-
- If StringSize is NULL, then ASSERT.
- If String is NULL and *StringSize is not 0, then ASSERT.
- If PackageList could not be found in the default HII database, then ASSERT.
- If StringId is not found in PackageList, then ASSERT.
-
- @param PackageList The package list in the HII database to search for
- the specified string.
- @param StringId The string's id, which is unique within
- PackageList.
- @param String Points to the new null-terminated string.
- @param StringSize On entry, points to the size of the buffer pointed
- to by String, in bytes. On return, points to the
- length of the string, in bytes.
-
- @retval EFI_SUCCESS The string was returned successfully.
- @retval EFI_NOT_FOUND The string specified by StringId is not available.
- @retval EFI_BUFFER_TOO_SMALL The buffer specified by StringLength is too small
- to hold the string.
-
-**/
-EFI_STATUS
-EFIAPI
-HiiLibGetString (
- IN EFI_HII_HANDLE PackageList,
- IN EFI_STRING_ID StringId,
- OUT EFI_STRING String,
- IN OUT UINTN *StringSize
- );
-
-/**
- Get string specified by StringId form the HiiHandle. The caller
- is responsible to free the *String.
-
- If String is NULL, then ASSERT.
- If HiiHandle could not be found in the default HII database, then ASSERT.
- If StringId is not found in PackageList, then ASSERT.
-
- @param HiiHandle The HII handle of package list.
- @param StringId The String ID.
- @param String The output string.
-
- @retval EFI_NOT_FOUND String is not found.
- @retval EFI_SUCCESS Operation is successful.
- @retval EFI_OUT_OF_RESOURCES There is not enought memory in the system.
-
-**/
-EFI_STATUS
-EFIAPI
-HiiLibGetStringFromHandle (
- IN EFI_HII_HANDLE HiiHandle,
- IN EFI_STRING_ID StringId,
- OUT EFI_STRING *String
- );
-
-/**
- Get the string given the StringId and String package Producer's Guid. The caller
- is responsible to free the *String.
-
- If PackageList with the matching ProducerGuid is not found, then ASSERT.
- If PackageList with the matching ProducerGuid is found but no String is
- specified by StringId is found, then ASSERT.
-
- @param ProducerGuid The Guid of String package list.
- @param StringId The String ID.
- @param String The output string.
-
- @retval EFI_SUCCESS Operation is successful.
- @retval EFI_OUT_OF_RESOURCES There is not enought memory in the system.
-
-**/
-EFI_STATUS
-EFIAPI
-HiiLibGetStringFromToken (
- IN EFI_GUID *ProducerGuid,
- IN EFI_STRING_ID StringId,
- OUT EFI_STRING *String
- );
-
-/**
- Determines the handles that are currently active in the database.
- It's the caller's responsibility to free handle buffer.
-
- If HandleBufferLength is NULL, then ASSERT.
- If HiiHandleBuffer is NULL, then ASSERT.
-
- @param HandleBufferLength On input, a pointer to the length of the handle
- buffer. On output, the length of the handle buffer
- that is required for the handles found.
- @param HiiHandleBuffer Pointer to an array of Hii Handles returned.
-
- @retval EFI_SUCCESS Get an array of Hii Handles successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-HiiLibGetHiiHandles (
- IN OUT UINTN *HandleBufferLength,
- OUT EFI_HII_HANDLE **HiiHandleBuffer
- );
-
-/**
- Extract Hii package list GUID for given HII handle.
-
- If HiiHandle could not be found in the default HII database, then ASSERT.
- If Guid is NULL, then ASSERT.
-
- @param Handle Hii handle
- @param Guid Package list GUID
-
- @retval EFI_SUCCESS Successfully extract GUID from Hii database.
-
-**/
-EFI_STATUS
-EFIAPI
-HiiLibExtractGuidFromHiiHandle (
- IN EFI_HII_HANDLE Handle,
- OUT EFI_GUID *Guid
- );
-
-/**
- Find HII Handle in the default HII database associated with given Device Path.
-
- If DevicePath is NULL, then ASSERT.
-
- @param DevicePath Device Path associated with the HII package list
- handle.
-
- @retval Handle HII package list Handle associated with the Device
- Path.
- @retval NULL Hii Package list handle is not found.
-
-**/
-EFI_HII_HANDLE
-EFIAPI
-HiiLibDevicePathToHiiHandle (
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-
-/**
- Get next language from language code list (with separator ';').
-
- If LangCode is NULL, then ASSERT.
- If Lang is NULL, then ASSERT.
-
- @param LangCode On input: point to first language in the list. On
- output: point to next language in the list, or
- NULL if no more language in the list.
- @param Lang The first language in the list.
-
-**/
-VOID
-EFIAPI
-HiiLibGetNextLanguage (
- IN OUT CHAR8 **LangCode,
- OUT CHAR8 *Lang
- );
-
-/**
- This function returns the list of supported languages, in the format specified
- in UEFI specification Appendix M.
-
- If HiiHandle is not a valid Handle in the default HII database, then ASSERT.
-
- @param HiiHandle The HII package list handle.
-
- @retval !NULL The supported languages.
- @retval NULL If Supported Languages can not be retrived.
-
-**/
-CHAR8 *
-EFIAPI
-HiiLibGetSupportedLanguages (
- IN EFI_HII_HANDLE HiiHandle
- );
-
-/**
- This function returns the list of supported 2nd languages, in the format specified
- in UEFI specification Appendix M.
-
- If HiiHandle is not a valid Handle in the default HII database, then ASSERT.
- If not enough resource to complete the operation, then ASSERT.
-
- @param HiiHandle The HII package list handle.
- @param FirstLanguage Pointer to language name buffer.
-
- @return The supported languages.
-
-**/
-CHAR8 *
-EFIAPI
-HiiLibGetSupportedSecondaryLanguages (
- IN EFI_HII_HANDLE HiiHandle,
- IN CONST CHAR8 *FirstLanguage
- );
-
-
-/**
- This function returns the number of supported languages on HiiHandle.
-
- If HiiHandle is not a valid Handle in the default HII database, then ASSERT.
- If not enough resource to complete the operation, then ASSERT.
-
- @param HiiHandle The HII package list handle.
-
- @return The number of supported languages.
-
-**/
-UINT16
-EFIAPI
-HiiLibGetSupportedLanguageNumber (
- IN EFI_HII_HANDLE HiiHandle
- );
-
-/**
- Exports the contents of one or all package lists in the HII database into a buffer.
-
- If Handle is not NULL and not a valid EFI_HII_HANDLE registered in the database,
- then ASSERT.
- If PackageListHeader is NULL, then ASSERT.
- If PackageListSize is NULL, then ASSERT.
-
- @param Handle The HII Handle.
- @param PackageListHeader A pointer to a buffer that will contain the results of
- the export function.
- @param PackageListSize On output, the length of the buffer that is required for the exported data.
-
- @retval EFI_SUCCESS Package exported.
-
- @retval EFI_OUT_OF_RESOURCES Not enought memory to complete the operations.
-
-**/
-EFI_STATUS
-EFIAPI
-HiiLibExportPackageLists (
- IN EFI_HII_HANDLE Handle,
- OUT EFI_HII_PACKAGE_LIST_HEADER **PackageListHeader,
- OUT UINTN *PackageListSize
- );
-
-/**
-
- This function returns a list of the package handles of the
- specified type that are currently active in the HII database. The
- pseudo-type EFI_HII_PACKAGE_TYPE_ALL will cause all package
- handles to be listed.
-
- If HandleBufferLength is NULL, then ASSERT.
- If HandleBuffer is NULL, the ASSERT.
- If PackageType is EFI_HII_PACKAGE_TYPE_GUID and PackageGuid is
- NULL, then ASSERT.
- If PackageType is not EFI_HII_PACKAGE_TYPE_GUID and PackageGuid is not
- NULL, then ASSERT.
-
-
- @param PackageType Specifies the package type of the packages
- to list or EFI_HII_PACKAGE_TYPE_ALL for
- all packages to be listed.
-
- @param PackageGuid If PackageType is
- EFI_HII_PACKAGE_TYPE_GUID, then this is
- the pointer to the GUID which must match
- the Guid field of
- EFI_HII_PACKAGE_GUID_HEADER. Otherwise, it
- must be NULL.
-
- @param HandleBufferLength On output, the length of the handle buffer
- that is required for the handles found.
-
- @param HandleBuffer On output, an array of EFI_HII_HANDLE instances returned.
- The caller is responcible to free this pointer allocated.
-
- @retval EFI_SUCCESS The matching handles are outputed successfully.
- HandleBufferLength is updated with the actual length.
- @retval EFI_OUT_OF_RESOURCES Not enough resource to complete the operation.
- @retval EFI_NOT_FOUND No matching handle could not be found in database.
-**/
-EFI_STATUS
-EFIAPI
-HiiLibListPackageLists (
- IN UINT8 PackageType,
- IN CONST EFI_GUID *PackageGuid,
- IN OUT UINTN *HandleBufferLength,
- OUT EFI_HII_HANDLE **Handle
- );
-
-/**
- Convert language code from RFC3066 to ISO639-2.
-
- LanguageRfc3066 contain a single RFC 3066 code such as
- "en-US" or "fr-FR".
-
- The LanguageRfc3066 must be a buffer large enough
- for ISO_639_2_ENTRY_SIZE characters.
-
- If LanguageRfc3066 is NULL, then ASSERT.
- If LanguageIso639 is NULL, then ASSERT.
-
- @param LanguageRfc3066 RFC3066 language code.
- @param LanguageIso639 ISO639-2 language code.
-
- @retval EFI_SUCCESS Language code converted.
- @retval EFI_NOT_FOUND Language code not found.
-
-**/
-EFI_STATUS
-EFIAPI
-ConvertRfc3066LanguageToIso639Language (
- IN CHAR8 *LanguageRfc3066,
- OUT CHAR8 *LanguageIso639
- );
-
-/**
- Convert language code from ISO639-2 to RFC3066.
-
- LanguageIso639 contain a single ISO639-2 code such as
- "eng" or "fra".
-
- The LanguageRfc3066 must be a buffer large enough
- for RFC_3066_ENTRY_SIZE characters.
-
- If LanguageIso639 is NULL, then ASSERT.
- If LanguageRfc3066 is NULL, then ASSERT.
-
- @param LanguageIso639 ISO639-2 language code.
- @param LanguageRfc3066 RFC3066 language code.
-
- @retval EFI_SUCCESS Language code converted.
- @retval EFI_NOT_FOUND Language code not found.
-
-**/
-EFI_STATUS
-EFIAPI
-ConvertIso639LanguageToRfc3066Language (
- IN CONST CHAR8 *LanguageIso639,
- OUT CHAR8 *LanguageRfc3066
- );
-
-/**
- Convert language code list from RFC3066 to ISO639-2, e.g. "en-US;fr-FR" will
- be converted to "engfra".
-
- If SupportedLanguages is NULL, then ASSERT.
-
- @param SupportedLanguages The RFC3066 language list.
-
- @return The ISO639-2 language list.
-
-**/
-CHAR8 *
-EFIAPI
-Rfc3066ToIso639 (
- CHAR8 *SupportedLanguages
- );
-
-#endif
diff --git a/MdePkg/Include/Library/IfrSupportLib.h b/MdePkg/Include/Library/IfrSupportLib.h
deleted file mode 100644
index 3f686bd49c..0000000000
--- a/MdePkg/Include/Library/IfrSupportLib.h
+++ /dev/null
@@ -1,765 +0,0 @@
-/** @file
- This library contains functions to do IFR opcode creation and utility functions
- to help module to interact with a UEFI Form Browser.
-
- Copyright (c) 2007 - 2008, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _IFR_SUPPORT_LIBRARY_H_
-#define _IFR_SUPPORT_LIBRARY_H_
-
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include
-
-//
-// The architectural variable "Lang" and "LangCodes" are deprecated in UEFI
-// specification. While, UEFI specification also states that these deprecated
-// variables may be provided for backwards compatibility.
-
-#define EFI_LANGUAGE_VARIABLE L"Lang"
-#define EFI_LANGUAGE_CODES_VARIABLE L"LangCodes"
-
-#define UEFI_LANGUAGE_VARIABLE L"PlatformLang"
-#define UEFI_LANGUAGE_CODES_VARIABLE L"PlatformLangCodes"
-
-#define INVALID_VARSTORE_ID 0
-
-#define QUESTION_FLAGS (EFI_IFR_FLAG_READ_ONLY | EFI_IFR_FLAG_CALLBACK | EFI_IFR_FLAG_RESET_REQUIRED | EFI_IFR_FLAG_OPTIONS_ONLY)
-#define QUESTION_FLAGS_MASK (~QUESTION_FLAGS)
-
-#pragma pack(1)
-typedef struct {
- EFI_STRING_ID StringToken;
- EFI_IFR_TYPE_VALUE Value;
- UINT8 Flags;
-} IFR_OPTION;
-#pragma pack()
-
-typedef struct {
- ///
- /// Buffer size allocated for Data.
- ///
- UINT32 BufferSize;
-
- ///
- /// Offset in Data to append the newly created opcode binary.
- /// It will be adjusted automatically in Create***OpCode(), and should be
- /// initialized to 0 before invocation of a serial of Create***OpCode()
- ///
- UINT32 Offset;
-
- ///
- /// The destination buffer for created op-codes
- ///
- UINT8 *Data;
-} EFI_HII_UPDATE_DATA;
-
-
-/**
- Create EFI_IFR_END_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateEndOpCode (
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_DEFAULT_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param Value Value for the default
- @param Type Type for the default
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
- @retval EFI_INVALID_PARAMETER The type is not valid.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateDefaultOpCode (
- IN EFI_IFR_TYPE_VALUE *Value,
- IN UINT8 Type,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_ACTION_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param QuestionId Question ID
- @param Prompt String ID for Prompt
- @param Help String ID for Help
- @param QuestionFlags Flags in Question Header
- @param QuestionConfig String ID for configuration
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
- @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateActionOpCode (
- IN EFI_QUESTION_ID QuestionId,
- IN EFI_STRING_ID Prompt,
- IN EFI_STRING_ID Help,
- IN UINT8 QuestionFlags,
- IN EFI_STRING_ID QuestionConfig,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_SUBTITLE_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param Prompt String ID for Prompt
- @param Help String ID for Help
- @param Flags Subtitle opcode flags
- @param Scope Subtitle Scope bit
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateSubTitleOpCode (
- IN EFI_STRING_ID Prompt,
- IN EFI_STRING_ID Help,
- IN UINT8 Flags,
- IN UINT8 Scope,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_TEXT_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param Prompt String ID for Prompt
- @param Help String ID for Help
- @param TextTwo String ID for text two
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateTextOpCode (
- IN EFI_STRING_ID Prompt,
- IN EFI_STRING_ID Help,
- IN EFI_STRING_ID TextTwo,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_REF_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param FormId Destination Form ID
- @param Prompt String ID for Prompt
- @param Help String ID for Help
- @param QuestionFlags Flags in Question Header
- @param QuestionId Question ID
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
- @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateGotoOpCode (
- IN EFI_FORM_ID FormId,
- IN EFI_STRING_ID Prompt,
- IN EFI_STRING_ID Help,
- IN UINT8 QuestionFlags,
- IN EFI_QUESTION_ID QuestionId,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_ONE_OF_OPTION_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param OptionCount The number of options.
- @param OptionsList The list of Options.
- @param Type The data type.
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
- @retval EFI_INVALID_PARAMETER If OptionCount is not zero but OptionsList is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateOneOfOptionOpCode (
- IN UINTN OptionCount,
- IN IFR_OPTION *OptionsList,
- IN UINT8 Type,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_ONE_OF_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param QuestionId Question ID
- @param VarStoreId Storage ID
- @param VarOffset Offset in Storage
- @param Prompt String ID for Prompt
- @param Help String ID for Help
- @param QuestionFlags Flags in Question Header
- @param OneOfFlags Flags for oneof opcode
- @param OptionsList List of options
- @param OptionCount Number of options in option list
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
- @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateOneOfOpCode (
- IN EFI_QUESTION_ID QuestionId,
- IN EFI_VARSTORE_ID VarStoreId,
- IN UINT16 VarOffset,
- IN EFI_STRING_ID Prompt,
- IN EFI_STRING_ID Help,
- IN UINT8 QuestionFlags,
- IN UINT8 OneOfFlags,
- IN IFR_OPTION *OptionsList,
- IN UINTN OptionCount,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_ORDERED_LIST_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param QuestionId Question ID
- @param VarStoreId Storage ID
- @param VarOffset Offset in Storage
- @param Prompt String ID for Prompt
- @param Help String ID for Help
- @param QuestionFlags Flags in Question Header
- @param OrderedListFlags Flags for ordered list opcode
- @param DataType Type for option value
- @param MaxContainers Maximum count for options in this ordered list
- @param OptionsList List of options
- @param OptionCount Number of options in option list
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
- @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateOrderedListOpCode (
- IN EFI_QUESTION_ID QuestionId,
- IN EFI_VARSTORE_ID VarStoreId,
- IN UINT16 VarOffset,
- IN EFI_STRING_ID Prompt,
- IN EFI_STRING_ID Help,
- IN UINT8 QuestionFlags,
- IN UINT8 OrderedListFlags,
- IN UINT8 DataType,
- IN UINT8 MaxContainers,
- IN IFR_OPTION *OptionsList,
- IN UINTN OptionCount,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_CHECKBOX_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param QuestionId Question ID
- @param VarStoreId Storage ID
- @param VarOffset Offset in Storage
- @param Prompt String ID for Prompt
- @param Help String ID for Help
- @param QuestionFlags Flags in Question Header
- @param CheckBoxFlags Flags for checkbox opcode
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
- @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateCheckBoxOpCode (
- IN EFI_QUESTION_ID QuestionId,
- IN EFI_VARSTORE_ID VarStoreId,
- IN UINT16 VarOffset,
- IN EFI_STRING_ID Prompt,
- IN EFI_STRING_ID Help,
- IN UINT8 QuestionFlags,
- IN UINT8 CheckBoxFlags,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_NUMERIC_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param QuestionId Question ID
- @param VarStoreId Storage ID
- @param VarOffset Offset in Storage
- @param Prompt String ID for Prompt
- @param Help String ID for Help
- @param QuestionFlags Flags in Question Header
- @param NumericFlags Flags for numeric opcode
- @param Minimum Numeric minimum value
- @param Maximum Numeric maximum value
- @param Step Numeric step for edit
- @param Default Numeric default value
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
- @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateNumericOpCode (
- IN EFI_QUESTION_ID QuestionId,
- IN EFI_VARSTORE_ID VarStoreId,
- IN UINT16 VarOffset,
- IN EFI_STRING_ID Prompt,
- IN EFI_STRING_ID Help,
- IN UINT8 QuestionFlags,
- IN UINT8 NumericFlags,
- IN UINT64 Minimum,
- IN UINT64 Maximum,
- IN UINT64 Step,
- IN UINT64 Default,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-
-/**
- Create EFI_IFR_STRING_OP opcode.
-
- If Data is NULL or Data->Data is NULL, then ASSERT.
-
- @param QuestionId Question ID
- @param VarStoreId Storage ID
- @param VarOffset Offset in Storage
- @param Prompt String ID for Prompt
- @param Help String ID for Help
- @param QuestionFlags Flags in Question Header
- @param StringFlags Flags for string opcode
- @param MinSize String minimum length
- @param MaxSize String maximum length
- @param Data Destination for the created opcode binary
-
- @retval EFI_SUCCESS Opcode is created successfully.
- @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small.
- @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateStringOpCode (
- IN EFI_QUESTION_ID QuestionId,
- IN EFI_VARSTORE_ID VarStoreId,
- IN UINT16 VarOffset,
- IN EFI_STRING_ID Prompt,
- IN EFI_STRING_ID Help,
- IN UINT8 QuestionFlags,
- IN UINT8 StringFlags,
- IN UINT8 MinSize,
- IN UINT8 MaxSize,
- IN OUT EFI_HII_UPDATE_DATA *Data
- )
-;
-/**
- Construct for a buffer storage.
-
- @param ConfigRequest The Config request string. If set to NULL, all the
- configurable elements will be extracted from BlockNameArray.
- @param ConfigAltResp The returned .
- @param Progress On return, points to a character in the Request.
- @param Guid GUID of the buffer storage.
- @param Name Name of the buffer storage.
- @param DriverHandle The DriverHandle which is used to invoke HiiDatabase
- protocol interface NewPackageList().
- @param BufferStorage Content of the buffer storage.
- @param BufferStorageSize Length in bytes of the buffer storage.
- @param BlockNameArray Array generated by VFR compiler.
- @param NumberAltCfg Number of Default value array generated by VFR compiler.
- The sequential input parameters will be number of
- AltCfgId and DefaultValueArray pairs. When set to 0,
- there will be no .
-
- retval EFI_OUT_OF_RESOURCES Run out of memory resource.
- retval EFI_INVALID_PARAMETER ConfigAltResp is NULL.
- retval EFI_SUCCESS Operation successful.
-
-**/
-EFI_STATUS
-ConstructConfigAltResp (
- IN EFI_STRING ConfigRequest, OPTIONAL
- OUT EFI_STRING *Progress,
- OUT EFI_STRING *ConfigAltResp,
- IN EFI_GUID *Guid,
- IN CHAR16 *Name,
- IN EFI_HANDLE *DriverHandle,
- IN VOID *BufferStorage,
- IN UINTN BufferStorageSize,
- IN VOID *BlockNameArray, OPTIONAL
- IN UINTN NumberAltCfg,
- ...
-//IN UINT16 AltCfgId,
-//IN VOID *DefaultValueArray,
- )
-;
-
-/**
- Converts the unicode character of the string from uppercase to lowercase.
-
- @param Str String to be converted
-
-
-**/
-VOID
-EFIAPI
-ToLower (
- IN OUT CHAR16 *Str
- )
-;
-
-/**
- Converts binary buffer to a Unicode string. The byte buffer is in a reversed byte order
- compared with the byte order defined in BufToHexString().
-
- @param Str String for output
- @param Buffer Binary buffer.
- @param BufferSize Size of the buffer in bytes.
-
- @retval EFI_SUCCESS The function completed successfully.
- @retval EFI_OUT_OF_RESOURCES There is no enough available memory space.
-
-**/
-EFI_STATUS
-EFIAPI
-BufInReverseOrderToHexString (
- IN OUT CHAR16 *Str,
- IN UINT8 *Buffer,
- IN UINTN BufferSize
- )
-;
-
-/**
- Converts Hex String to binary buffer in reversed byte order to HexStringToBuf().
-
- @param Buffer Pointer to buffer that receives the data.
- @param BufferSize Length in bytes of the buffer to hold converted
- data. If routine return with EFI_SUCCESS,
- containing length of converted data. If routine
- return with EFI_BUFFER_TOO_SMALL, containg length
- of buffer desired.
- @param Str String to be converted from.
-
- @retval EFI_SUCCESS The function completed successfully.
- @retval RETURN_BUFFER_TOO_SMALL The input BufferSize is too small to hold the output. BufferSize
- will be updated to the size required for the converstion.
-
-**/
-EFI_STATUS
-EFIAPI
-HexStringToBufInReverseOrder (
- IN OUT UINT8 *Buffer,
- IN OUT UINTN *BufferSize,
- IN CHAR16 *Str
- )
-;
-
-/**
- Convert binary representation Config string (e.g. "0041004200430044") to the
- original string (e.g. "ABCD"). Config string appears in (i.e.
- "&NAME="), or Name/Value pair in (i.e. "label=").
-
- @param UnicodeString Original Unicode string.
- @param StrBufferLen On input: Length in bytes of buffer to hold the Unicode string.
- Includes tailing '\0' character.
- On output:
- containing length of Unicode string buffer when returning EFI_SUCCESS;
- containg length of string buffer desired when returning EFI_BUFFER_TOO_SMALL.
- @param ConfigString Binary representation of Unicode String, := (4)+
-
- @retval EFI_SUCCESS Operation completes successfully.
- @retval EFI_BUFFER_TOO_SMALL The string buffer is too small.
-
-**/
-EFI_STATUS
-EFIAPI
-ConfigStringToUnicode (
- IN OUT CHAR16 *UnicodeString,
- IN OUT UINTN *StrBufferLen,
- IN CHAR16 *ConfigString
- )
-;
-
-/**
- Convert Unicode string to binary representation Config string, e.g.
- "ABCD" => "0041004200430044". Config string appears in (i.e.
- "&NAME="), or Name/Value pair in (i.e. "label=").
-
- @param ConfigString Binary representation of Unicode String, := (4)+
- @param StrBufferLen On input: Length in bytes of buffer to hold the Unicode string.
- Includes tailing '\0' character.
- On output:
- If return EFI_SUCCESS, containing length of Unicode string buffer.
- If return EFI_BUFFER_TOO_SMALL, containg length of string buffer desired.
- @param UnicodeString Original Unicode string.
-
- @retval EFI_SUCCESS Operation completes successfully.
- @retval EFI_BUFFER_TOO_SMALL The string buffer is too small.
-
-**/
-EFI_STATUS
-EFIAPI
-UnicodeToConfigString (
- IN OUT CHAR16 *ConfigString,
- IN OUT UINTN *StrBufferLen,
- IN CHAR16 *UnicodeString
- )
-;
-
-/**
- Construct using routing information GUID/NAME/PATH.
-
- @param ConfigHdr Pointer to the ConfigHdr string.
- @param StrBufferLen On input: Length in bytes of buffer to hold the
- ConfigHdr string. Includes tailing '\0' character.
- On output: If return EFI_SUCCESS, containing
- length of ConfigHdr string buffer. If return
- EFI_BUFFER_TOO_SMALL, containg length of string
- buffer desired.
- @param Guid Routing information: GUID.
- @param Name Routing information: NAME.
- @param DriverHandle Driver handle which contains the routing
- information: PATH.
-
- @retval EFI_SUCCESS Operation completes successfully.
- @retval EFI_BUFFER_TOO_SMALL The ConfigHdr string buffer is too small.
-
-**/
-EFI_STATUS
-EFIAPI
-ConstructConfigHdr (
- IN OUT CHAR16 *ConfigHdr,
- IN OUT UINTN *StrBufferLen,
- IN CONST EFI_GUID *Guid,
- IN CHAR16 *Name, OPTIONAL
- IN EFI_HANDLE *DriverHandle
- )
-
-;
-
-/**
- Determines if the Routing data (Guid and Name) is correct in .
-
- @param ConfigString Either or .
- @param StorageGuid GUID of the storage.
- @param StorageName Name of the stoarge.
-
- @retval TRUE Routing information is correct in ConfigString.
- @retval FALSE Routing information is incorrect in ConfigString.
-
-**/
-BOOLEAN
-IsConfigHdrMatch (
- IN EFI_STRING ConfigString,
- IN EFI_GUID *StorageGuid, OPTIONAL
- IN CHAR16 *StorageName OPTIONAL
- )
-;
-
-/**
- Search BlockName "&OFFSET=Offset&WIDTH=Width" in a string.
-
- @param String The string to be searched in.
- @param Offset Offset in BlockName.
- @param Width Width in BlockName.
-
- @retval TRUE Block name found.
- @retval FALSE Block name not found.
-
-**/
-BOOLEAN
-EFIAPI
-FindBlockName (
- IN OUT CHAR16 *String,
- IN UINTN Offset,
- IN UINTN Width
- )
-;
-
-/**
- This routine is invoked by ConfigAccess.Callback() to retrived uncommitted data from Form Browser.
-
- @param VariableGuid An optional field to indicate the target variable
- GUID name to use.
- @param VariableName An optional field to indicate the target
- human-readable variable name.
- @param BufferSize On input: Length in bytes of buffer to hold
- retrived data. On output: If return
- EFI_BUFFER_TOO_SMALL, containg length of buffer
- desired.
- @param Buffer Buffer to hold retrived data.
-
- @retval EFI_SUCCESS Operation completes successfully.
- @retval EFI_BUFFER_TOO_SMALL The intput buffer is too small.
-
-**/
-EFI_STATUS
-EFIAPI
-GetBrowserData (
- IN CONST EFI_GUID *VariableGuid, OPTIONAL
- IN CONST CHAR16 *VariableName, OPTIONAL
- IN OUT UINTN *BufferSize,
- IN OUT UINT8 *Buffer
- )
-;
-
-/**
- This routine is invoked by ConfigAccess.Callback() to update uncommitted data of Form Browser.
-
- @param VariableGuid An optional field to indicate the target variable
- GUID name to use.
- @param VariableName An optional field to indicate the target
- human-readable variable name.
- @param BufferSize Length in bytes of buffer to hold retrived data.
- @param Buffer Buffer to hold retrived data.
- @param RequestElement An optional field to specify which part of the
- buffer data will be send back to Browser. If NULL,
- the whole buffer of data will be committed to
- Browser. ::=
- &OFFSET=&WIDTH=*
-
- @retval EFI_SUCCESS Operation completes successfully.
- @retval Other Updating Browser uncommitted data failed.
-
-**/
-EFI_STATUS
-EFIAPI
-SetBrowserData (
- IN CONST EFI_GUID *VariableGuid, OPTIONAL
- IN CONST CHAR16 *VariableName, OPTIONAL
- IN UINTN BufferSize,
- IN CONST UINT8 *Buffer,
- IN CONST CHAR16 *RequestElement OPTIONAL
- )
-;
-
-/**
- Draw a dialog and return the selected key.
-
- @param NumberOfLines The number of lines for the dialog box
- @param KeyValue The EFI_KEY value returned if HotKey is TRUE..
- @param String Pointer to the first string in the list
- @param ... A series of (quantity == NumberOfLines - 1) text
- strings which will be used to construct the dialog
- box
-
- @retval EFI_SUCCESS Displayed dialog and received user interaction
- @retval EFI_INVALID_PARAMETER One of the parameters was invalid.
-
-**/
-EFI_STATUS
-EFIAPI
-IfrLibCreatePopUp (
- IN UINTN NumberOfLines,
- OUT EFI_INPUT_KEY *KeyValue,
- IN CHAR16 *String,
- ...
- )
-;
-
-/**
- Draw a dialog and return the selected key using Variable Argument List.
-
- @param NumberOfLines The number of lines for the dialog box
- @param KeyValue The EFI_KEY value returned if HotKey is TRUE..
- @param Args VA_LIST marker for the variable argument list.
- A series of (quantity == NumberOfLines - 1) text
- strings which will be used to construct the dialog
- box
-
- @retval EFI_SUCCESS Displayed dialog and received user interaction
- @retval EFI_INVALID_PARAMETER One of the parameters was invalid.
-
-**/
-EFI_STATUS
-EFIAPI
-IfrLibCreatePopUp2 (
- IN UINTN NumberOfLines,
- OUT EFI_INPUT_KEY *KeyValue,
- IN VA_LIST Args
- )
-;
-
-#endif