MdePkg: Add BaseRiscVSbiLib Library for RISC-V

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076

This library is required to make SBI ecalls from the S-mode EDK2.
This is mostly copied from
edk2-platforms/Silicon/RISC-V/ProcessorPkg/Library/RiscVEdk2SbiLib

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This commit is contained in:
Sunil V L 2022-09-07 12:23:32 +05:30 committed by mergify[bot]
parent 550f196e82
commit 76e956547e
6 changed files with 460 additions and 0 deletions

View File

@ -0,0 +1,154 @@
/** @file
Library to call the RISC-V SBI ecalls
Copyright (c) 2021-2022, Hewlett Packard Development LP. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Glossary:
- Hart - Hardware Thread, similar to a CPU core
Currently, EDK2 needs to call SBI only to set the time and to do system reset.
**/
#ifndef RISCV_SBI_LIB_H_
#define RISCV_SBI_LIB_H_
#include <Uefi.h>
/* SBI Extension IDs */
#define SBI_EXT_TIME 0x54494D45
#define SBI_EXT_SRST 0x53525354
/* SBI function IDs for TIME extension*/
#define SBI_EXT_TIME_SET_TIMER 0x0
/* SBI function IDs for SRST extension */
#define SBI_EXT_SRST_RESET 0x0
#define SBI_SRST_RESET_TYPE_SHUTDOWN 0x0
#define SBI_SRST_RESET_TYPE_COLD_REBOOT 0x1
#define SBI_SRST_RESET_TYPE_WARM_REBOOT 0x2
#define SBI_SRST_RESET_REASON_NONE 0x0
#define SBI_SRST_RESET_REASON_SYSFAIL 0x1
/* SBI return error codes */
#define SBI_SUCCESS 0
#define SBI_ERR_FAILED -1
#define SBI_ERR_NOT_SUPPORTED -2
#define SBI_ERR_INVALID_PARAM -3
#define SBI_ERR_DENIED -4
#define SBI_ERR_INVALID_ADDRESS -5
#define SBI_ERR_ALREADY_AVAILABLE -6
#define SBI_ERR_ALREADY_STARTED -7
#define SBI_ERR_ALREADY_STOPPED -8
#define SBI_LAST_ERR SBI_ERR_ALREADY_STOPPED
typedef struct {
UINT64 BootHartId;
VOID *PeiServiceTable; // PEI Service table
VOID *PrePiHobList; // Pre PI Hob List
UINT64 FlattenedDeviceTree; // Pointer to Flattened Device tree
} EFI_RISCV_FIRMWARE_CONTEXT;
//
// EDK2 OpenSBI firmware extension return status.
//
typedef struct {
UINTN Error; ///< SBI status code
UINTN Value; ///< Value returned
} SBI_RET;
VOID
EFIAPI
SbiSetTimer (
IN UINT64 Time
);
EFI_STATUS
EFIAPI
SbiSystemReset (
IN UINTN ResetType,
IN UINTN ResetReason
);
/**
Get firmware context of the calling hart.
@param[out] FirmwareContext The firmware context pointer.
**/
VOID
EFIAPI
GetFirmwareContext (
OUT EFI_RISCV_FIRMWARE_CONTEXT **FirmwareContext
);
/**
Set firmware context of the calling hart.
@param[in] FirmwareContext The firmware context pointer.
**/
VOID
EFIAPI
SetFirmwareContext (
IN EFI_RISCV_FIRMWARE_CONTEXT *FirmwareContext
);
/**
Get pointer to OpenSBI Firmware Context
Get the pointer of firmware context.
@param FirmwareContextPtr Pointer to retrieve pointer to the
Firmware Context.
**/
VOID
EFIAPI
GetFirmwareContextPointer (
IN OUT EFI_RISCV_FIRMWARE_CONTEXT **FirmwareContextPtr
);
/**
Set pointer to OpenSBI Firmware Context
Set the pointer of firmware context.
@param FirmwareContextPtr Pointer to Firmware Context.
**/
VOID
EFIAPI
SetFirmwareContextPointer (
IN EFI_RISCV_FIRMWARE_CONTEXT *FirmwareContextPtr
);
/**
Make ECALL in assembly
Switch to M-mode
@param[in,out] Arg0
@param[in,out] Arg1
@param[in] Arg2
@param[in] Arg3
@param[in] Arg4
@param[in] Arg5
@param[in] FID
@param[in] EXT
**/
VOID
EFIAPI
RiscVSbiEcall (
IN OUT UINTN *Arg0,
IN OUT UINTN *Arg1,
IN UINTN Arg2,
IN UINTN Arg3,
IN UINTN Arg4,
IN UINTN Arg5,
IN UINTN Fid,
IN UINTN Ext
);
#endif

View File

@ -0,0 +1,231 @@
/** @file
Instance of the SBI ecall library.
It allows calling an SBI function via an ecall from S-Mode.
Copyright (c) 2021-2022, Hewlett Packard Development LP. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/BaseRiscVSbiLib.h>
//
// Maximum arguments for SBI ecall
#define SBI_CALL_MAX_ARGS 6
/**
Call SBI call using ecall instruction.
Asserts when NumArgs exceeds SBI_CALL_MAX_ARGS.
@param[in] ExtId SBI extension ID.
@param[in] FuncId SBI function ID.
@param[in] NumArgs Number of arguments to pass to the ecall.
@param[in] ... Argument list for the ecall.
@retval Returns SBI_RET structure with value and error code.
**/
STATIC
SBI_RET
EFIAPI
SbiCall (
IN UINTN ExtId,
IN UINTN FuncId,
IN UINTN NumArgs,
...
)
{
UINTN I;
SBI_RET Ret;
UINTN Args[SBI_CALL_MAX_ARGS];
VA_LIST ArgList;
VA_START (ArgList, NumArgs);
if (NumArgs > SBI_CALL_MAX_ARGS) {
Ret.Error = SBI_ERR_INVALID_PARAM;
Ret.Value = -1;
return Ret;
}
for (I = 0; I < SBI_CALL_MAX_ARGS; I++) {
if (I < NumArgs) {
Args[I] = VA_ARG (ArgList, UINTN);
} else {
// Default to 0 for all arguments that are not given
Args[I] = 0;
}
}
VA_END (ArgList);
// ECALL updates the a0 and a1 registers as return values.
RiscVSbiEcall (
&Args[0],
&Args[1],
Args[2],
Args[3],
Args[4],
Args[5],
(UINTN)(FuncId),
(UINTN)(ExtId)
);
Ret.Error = Args[0];
Ret.Value = Args[1];
return Ret;
}
/**
Translate SBI error code to EFI status.
@param[in] SbiError SBI error code
@retval EFI_STATUS
**/
STATIC
EFI_STATUS
EFIAPI
TranslateError (
IN UINTN SbiError
)
{
switch (SbiError) {
case SBI_SUCCESS:
return EFI_SUCCESS;
case SBI_ERR_FAILED:
return EFI_DEVICE_ERROR;
break;
case SBI_ERR_NOT_SUPPORTED:
return EFI_UNSUPPORTED;
break;
case SBI_ERR_INVALID_PARAM:
return EFI_INVALID_PARAMETER;
break;
case SBI_ERR_DENIED:
return EFI_ACCESS_DENIED;
break;
case SBI_ERR_INVALID_ADDRESS:
return EFI_LOAD_ERROR;
break;
case SBI_ERR_ALREADY_AVAILABLE:
return EFI_ALREADY_STARTED;
break;
default:
//
// Reaches here only if SBI has defined a new error type
//
ASSERT (FALSE);
return EFI_UNSUPPORTED;
break;
}
}
/**
Clear pending timer interrupt bit and set timer for next event after Time.
To clear the timer without scheduling a timer event, set Time to a
practically infinite value or mask the timer interrupt by clearing sie.STIE.
@param[in] Time The time offset to the next scheduled timer interrupt.
**/
VOID
EFIAPI
SbiSetTimer (
IN UINT64 Time
)
{
SbiCall (SBI_EXT_TIME, SBI_EXT_TIME_SET_TIMER, 1, Time);
}
/**
Reset the system using SRST SBI extenion
@param[in] ResetType The SRST System Reset Type.
@param[in] ResetReason The SRST System Reset Reason.
**/
EFI_STATUS
EFIAPI
SbiSystemReset (
IN UINTN ResetType,
IN UINTN ResetReason
)
{
SBI_RET Ret;
Ret = SbiCall (
SBI_EXT_SRST,
SBI_EXT_SRST_RESET,
2,
ResetType,
ResetReason
);
return TranslateError (Ret.Error);
}
/**
Get firmware context of the calling hart.
@param[out] FirmwareContext The firmware context pointer.
**/
VOID
EFIAPI
GetFirmwareContext (
OUT EFI_RISCV_FIRMWARE_CONTEXT **FirmwareContext
)
{
*FirmwareContext = (EFI_RISCV_FIRMWARE_CONTEXT *)RiscVGetSupervisorScratch ();
}
/**
Set firmware context of the calling hart.
@param[in] FirmwareContext The firmware context pointer.
**/
VOID
EFIAPI
SetFirmwareContext (
IN EFI_RISCV_FIRMWARE_CONTEXT *FirmwareContext
)
{
RiscVSetSupervisorScratch ((UINT64)FirmwareContext);
}
/**
Get pointer to OpenSBI Firmware Context
Get the pointer of firmware context through OpenSBI FW Extension SBI.
@param FirmwareContextPtr Pointer to retrieve pointer to the
Firmware Context.
**/
VOID
EFIAPI
GetFirmwareContextPointer (
IN OUT EFI_RISCV_FIRMWARE_CONTEXT **FirmwareContextPtr
)
{
GetFirmwareContext (FirmwareContextPtr);
}
/**
Set the pointer to OpenSBI Firmware Context
Set the pointer of firmware context through OpenSBI FW Extension SBI.
@param FirmwareContextPtr Pointer to Firmware Context.
**/
VOID
EFIAPI
SetFirmwareContextPointer (
IN EFI_RISCV_FIRMWARE_CONTEXT *FirmwareContextPtr
)
{
SetFirmwareContext (FirmwareContextPtr);
}

View File

@ -0,0 +1,26 @@
## @file
# RISC-V Library to call SBI ecalls
#
# Copyright (c) 2020, Hewlett Packard Enterprise Development LP. All rights reserved.<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
##
[Defines]
INF_VERSION = 0x0001001b
BASE_NAME = BaseRiscVSbiLib
FILE_GUID = D742CF3D-E600-4009-8FB5-318073008508
MODULE_TYPE = BASE
VERSION_STRING = 1.0
LIBRARY_CLASS = RiscVSbiLib
[Sources]
BaseRiscVSbiLib.c
RiscVSbiEcall.S
[Packages]
MdePkg/MdePkg.dec
[LibraryClasses]
BaseLib

View File

@ -0,0 +1,42 @@
//------------------------------------------------------------------------------
//
// Make ECALL to SBI
//
// Copyright (c) 2023, Ventana Micro Systems Inc. All rights reserved.<BR>
//
// SPDX-License-Identifier: BSD-2-Clause-Patent
//
//------------------------------------------------------------------------------
#include <Register/RiscV64/RiscVImpl.h>
.data
.align 3
.section .text
//
// Make ECALL to SBI
// ecall updates the same a0 and a1 registers with
// return values. Hence, the C function which calls
// this should pass the address of Arg0 and Arg1.
// This routine saves the address and updates it
// with a0 and a1 once ecall returns.
//
// @param a0 : Pointer to Arg0
// @param a1 : Pointer to Arg1
// @param a2 : Arg2
// @param a3 : Arg3
// @param a4 : Arg4
// @param a5 : Arg5
// @param a6 : FunctionID
// @param a7 : ExtensionId
//
ASM_FUNC (RiscVSbiEcall)
mv t0, a0
mv t1, a1
ld a0, 0(a0)
ld a1, 0(a1)
ecall
sd a0, 0(t0)
sd a1, 0(t1)
ret

View File

@ -316,6 +316,10 @@
## @libraryclass Provides function to support TDX processing.
TdxLib|Include/Library/TdxLib.h
[LibraryClasses.RISCV64]
## @libraryclass Provides function to make ecalls to SBI
BaseRiscVSbiLib|Include/Library/BaseRiscVSbiLib.h
[Guids]
#
# GUID defined in UEFI2.1/UEFI2.0/EFI1.1

View File

@ -190,4 +190,7 @@
MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsicArmVirt.inf
MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf
[Components.RISCV64]
MdePkg/Library/BaseRiscVSbiLib/BaseRiscVSbiLib.inf
[BuildOptions]