diff --git a/DuetPkg/Library/DuetSerialIoLib/SerialPortLib.c b/DuetPkg/Library/DuetSerialIoLib/SerialPortLib.c index 518172ae50..f0cdc4982f 100644 --- a/DuetPkg/Library/DuetSerialIoLib/SerialPortLib.c +++ b/DuetPkg/Library/DuetSerialIoLib/SerialPortLib.c @@ -1,7 +1,7 @@ /** @file - Serial I/O Port library functions with no library constructor/destructor + UART Serial Port library instance with empty functions. - Copyright (c) 2006, Intel Corporation + Copyright (c) 2006 - 2008, Intel Corporation All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at @@ -12,11 +12,10 @@ **/ - #include -#include #include +#include //--------------------------------------------- // UART Register Offsets @@ -42,17 +41,25 @@ #define LSR_RXDA 0x01 #define DLAB 0x01 -UINT16 gComBase = 0x3f8; -UINTN gBps = 115200; -UINT8 gData = 8; -UINT8 gStop = 1; -UINT8 gParity = 0; +//--------------------------------------------- +// UART Settings +//--------------------------------------------- +UINT16 gUartBase = 0x3F8; +UINTN gBps = 115200; +UINT8 gData = 8; +UINT8 gStop = 1; +UINT8 gParity = 0; UINT8 gBreakSet = 0; -/* - Programmed hardware of Serial port. - - @return Always return EFI_UNSUPPORTED. +/** + Initialize the serial device hardware. + + If no initialization is required, then return RETURN_SUCCESS. + If the serial device was successfuly initialized, then return RETURN_SUCCESS. + If the serial device could not be initialized, then return RETURN_DEVICE_ERROR. + + @retval RETURN_SUCCESS The serial device was initialized. + @retval RETURN_DEVICE_ERROR The serail device could not be initialized. **/ RETURN_STATUS @@ -61,49 +68,58 @@ SerialPortInitialize ( VOID ) { - UINTN Divisor; - UINT8 OutputData; - UINT8 Data; + UINTN Divisor; + UINT8 OutputData; + UINT8 Data; - // + // // Map 5..8 to 0..3 // - Data = (UINT8) (gData - (UINT8)5); + Data = (UINT8) (gData - (UINT8) 5); // // Calculate divisor for baud generator // - Divisor = 115200 / gBps; + Divisor = 115200 / gBps; // // Set communications format // - OutputData = (UINT8)((DLAB << 7) | ((gBreakSet << 6) | ((gParity << 3) | ((gStop << 2) | Data)))); - IoWrite8 (gComBase + LCR_OFFSET, OutputData); + OutputData = (UINT8) ((DLAB << 7) | (gBreakSet << 6) | (gParity << 3) | (gStop << 2) | Data); + IoWrite8 ((UINTN) (gUartBase + LCR_OFFSET), OutputData); // // Configure baud rate // - IoWrite8 (gComBase + BAUD_HIGH_OFFSET, (UINT8)(Divisor >> 8)); - IoWrite8 (gComBase + BAUD_LOW_OFFSET, (UINT8)(Divisor & 0xff)); + IoWrite8 ((UINTN) (gUartBase + BAUD_HIGH_OFFSET), (UINT8) (Divisor >> 8)); + IoWrite8 ((UINTN) (gUartBase + BAUD_LOW_OFFSET), (UINT8) (Divisor & 0xff)); // // Switch back to bank 0 // - OutputData = (UINT8)((~DLAB<<7)|((gBreakSet<<6)|((gParity<<3)|((gStop<<2)| Data)))); - IoWrite8 (gComBase + LCR_OFFSET, OutputData); + OutputData = (UINT8) ((~DLAB << 7) | (gBreakSet << 6) | (gParity << 3) | (gStop << 2) | Data); + IoWrite8 ((UINTN) (gUartBase + LCR_OFFSET), OutputData); return RETURN_SUCCESS; } /** - Write data to serial device. + Write data from buffer to serial device. + + Writes NumberOfBytes data bytes from Buffer to the serial device. + The number of bytes actually written to the serial device is returned. + If the return value is less than NumberOfBytes, then the write operation failed. - @param Buffer Point of data buffer which need to be writed. - @param NumberOfBytes Number of output bytes which are cached in Buffer. + If Buffer is NULL, then ASSERT(). - @retval 0 Write data failed. - @retval !0 Actual number of bytes writed to serial device. + If NumberOfBytes is zero, then return 0. + + @param Buffer Pointer to the data buffer to be written. + @param NumberOfBytes Number of bytes to written to the serial device. + + @retval 0 NumberOfBytes is 0. + @retval >0 The number of bytes written to the serial device. + If this value is less than NumberOfBytes, then the read operation failed. **/ UINTN @@ -113,39 +129,38 @@ SerialPortWrite ( IN UINTN NumberOfBytes ) { - UINTN Result; - UINT8 Data; + UINTN Result; + UINT8 Data; - if (NULL == Buffer) { + if (Buffer == NULL) { return 0; } Result = NumberOfBytes; while (NumberOfBytes--) { - // - // Wait for the serail port to be ready. - // - do { - Data = IoRead8 (gComBase + LSR_OFFSET); - } while ((Data & LSR_TXRDY) == 0); - - IoWrite8 (gComBase, *Buffer++); + // + // Wait for the serail port to be ready. + // + do { + Data = IoRead8 ((UINT16) gUartBase + LSR_OFFSET); + } while ((Data & LSR_TXRDY) == 0); + IoWrite8 ((UINT16) gUartBase, *Buffer++); } return Result; - } /** - Read data from serial device and save the datas in buffer. + Reads data from a serial device into a buffer. - @param Buffer Point of data buffer which need to be writed. - @param NumberOfBytes Number of output bytes which are cached in Buffer. + @param Buffer Pointer to the data buffer to store the data read from the serial device. + @param NumberOfBytes Number of bytes to read from the serial device. - @retval 0 Read data failed. - @retval !0 Aactual number of bytes read from serial device. + @retval 0 NumberOfBytes is 0. + @retval >0 The number of bytes read from the serial device. + If this value is less than NumberOfBytes, then the read operation failed. **/ UINTN @@ -155,6 +170,53 @@ SerialPortRead ( IN UINTN NumberOfBytes ) { - return 0; + UINTN Result; + UINT8 Data; + + if (NULL == Buffer) { + return 0; + } + + Result = NumberOfBytes; + + while (NumberOfBytes--) { + // + // Wait for the serail port to be ready. + // + do { + Data = IoRead8 ((UINT16) gUartBase + LSR_OFFSET); + } while ((Data & LSR_RXDA) == 0); + + *Buffer++ = IoRead8 ((UINT16) gUartBase); + } + + return Result; +} + +/** + Polls a serial device to see if there is any data waiting to be read. + + Polls aserial device to see if there is any data waiting to be read. + If there is data waiting to be read from the serial device, then TRUE is returned. + If there is no data waiting to be read from the serial device, then FALSE is returned. + + @retval TRUE Data is waiting to be read from the serial device. + @retval FALSE There is no data waiting to be read from the serial device. + +**/ +BOOLEAN +EFIAPI +SerialPortPoll ( + VOID + ) +{ + UINT8 Data; + + // + // Read the serial port status. + // + Data = IoRead8 ((UINT16) gUartBase + LSR_OFFSET); + + return (BOOLEAN) ((Data & LSR_RXDA) != 0); }