mirror of https://github.com/acidanthera/audk.git
Pass X64 GCC building
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7741 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
klu2
parent
b0e441b554
commit
99032c4556
|
|
@ -45,6 +45,7 @@
|
|||
[Sources.X64]
|
||||
X64/CpuInterrupt.asm | INTEL
|
||||
X64/CpuInterrupt.asm | MSFT
|
||||
X64/CpuInterrupt.S |GCC
|
||||
|
||||
[Sources.common]
|
||||
Cpu.c
|
||||
|
|
|
|||
|
|
@ -0,0 +1,866 @@
|
|||
#------------------------------------------------------------------------------
|
||||
#*
|
||||
#* Copyright 2006, Intel Corporation
|
||||
#* All rights reserved. This program and the accompanying materials
|
||||
#* are licensed and made available under the terms and conditions of the BSD License
|
||||
#* which accompanies this distribution. The full text of the license may be found at
|
||||
#* http://opensource.org/licenses/bsd-license.php
|
||||
#*
|
||||
#* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||||
#* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||||
#*
|
||||
#* CpuInterrupt.S
|
||||
#*
|
||||
#* Abstract:
|
||||
#*
|
||||
#------------------------------------------------------------------------------
|
||||
|
||||
#PUBLIC SystemTimerHandler
|
||||
#PUBLIC SystemExceptionHandler
|
||||
#EXTERNDEF mExceptionCodeSize:DWORD
|
||||
|
||||
#EXTERN TimerHandler: NEAR
|
||||
#EXTERN ExceptionHandler: NEAR
|
||||
#EXTERN mTimerVector: DWORD
|
||||
|
||||
.data
|
||||
.globl ASM_PFX(mExceptionCodeSize)
|
||||
ASM_PFX(mExceptionCodeSize): .long 9
|
||||
|
||||
.text
|
||||
.globl ASM_PFX(InitDescriptor)
|
||||
|
||||
ASM_PFX(InitDescriptor):
|
||||
movq $GDT_BASE,%rax # EAX=PHYSICAL address of gdt
|
||||
movq %rax, gdtr + 2 # Put address of gdt into the gdtr
|
||||
lgdt gdtr
|
||||
movq $0x18, %rax
|
||||
movq %rax, %gs
|
||||
movq %rax, %fs
|
||||
movq $IDT_BASE,%rax # EAX=PHYSICAL address of idt
|
||||
movq %rax, idtr + 2 # Put address of idt into the idtr
|
||||
lidt idtr
|
||||
ret
|
||||
|
||||
# VOID
|
||||
# InstallInterruptHandler (
|
||||
# UINTN Vector,
|
||||
# VOID (*Handler)(VOID)
|
||||
# )
|
||||
.globl ASM_PFX(InstallInterruptHandler)
|
||||
ASM_PFX(InstallInterruptHandler):
|
||||
# Vector:DWORD @ 4(%esp)
|
||||
# Handler:DWORD @ 8(%esp)
|
||||
push %rbx
|
||||
pushfq # save eflags
|
||||
cli # turn off interrupts
|
||||
subq $0x10, %rsp # open some space on the stack
|
||||
movq %rsp, %rbx
|
||||
|
||||
sidt (%rbx) # get fword address of IDT
|
||||
movq 2(%rbx), %rbx # move offset of IDT into RBX
|
||||
addq $0x10, %rsp # correct stack
|
||||
movq %rcx, %rax # Get vector number
|
||||
shlq $4, %rax # multiply by 16 to get offset
|
||||
addq %rax, %rbx # add to IDT base to get entry
|
||||
movq %rdx, %rax # load new address into IDT entry
|
||||
movw %ax, (%rbx) # write bits 15..0 of offset
|
||||
shrq $16, %rax # use ax to copy 31..16 to descriptors
|
||||
movw %ax, 6(%rbx) # write bits 31..16 of offset
|
||||
shrq $16, %rax # use eax to copy 63..32 to descriptors
|
||||
movl %eax, 8(%rbx) # write bits 63..32 of offset
|
||||
popfq # restore flags (possible enabling interrupts)
|
||||
pop %rbx
|
||||
ret
|
||||
|
||||
.macro JmpCommonIdtEntry
|
||||
# jmp commonIdtEntry - this must be hand coded to keep the assembler from
|
||||
# using a 8 bit reletive jump when the entries are
|
||||
# within 255 bytes of the common entry. This must
|
||||
# be done to maintain the consistency of the size
|
||||
# of entry points...
|
||||
.byte 0xe9 # jmp 16 bit reletive
|
||||
.long commonIdtEntry - . - 4 # offset to jump to
|
||||
.endm
|
||||
|
||||
.align 2
|
||||
.globl ASM_PFX(SystemExceptionHandler)
|
||||
ASM_PFX(SystemExceptionHandler):
|
||||
INT0:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $0x0
|
||||
JmpCommonIdtEntry
|
||||
# db 0e9h # jmp 16 bit reletive
|
||||
# dd commonIdtEntry - $ - 4 # offset to jump to
|
||||
|
||||
INT1:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $0x1
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT2:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $0x2
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT3:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $0x3
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT4:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $0x4
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT5:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $0x5
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT6:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $0x6
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT7:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $0x7
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT8:
|
||||
# Double fault causes an error code to be pushed so no phony push necessary
|
||||
nop
|
||||
nop
|
||||
push $0x8
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT9:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $0x9
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT10:
|
||||
# Invalid TSS causes an error code to be pushed so no phony push necessary
|
||||
nop
|
||||
nop
|
||||
push $10
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT11:
|
||||
# Segment Not Present causes an error code to be pushed so no phony push necessary
|
||||
nop
|
||||
nop
|
||||
push $11
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT12:
|
||||
# Stack fault causes an error code to be pushed so no phony push necessary
|
||||
nop
|
||||
nop
|
||||
push $12
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT13:
|
||||
# GP fault causes an error code to be pushed so no phony push necessary
|
||||
nop
|
||||
nop
|
||||
push $13
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT14:
|
||||
# Page fault causes an error code to be pushed so no phony push necessary
|
||||
nop
|
||||
nop
|
||||
push $14
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT15:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $15
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT16:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $16
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT17:
|
||||
# Alignment check causes an error code to be pushed so no phony push necessary
|
||||
nop
|
||||
nop
|
||||
push $17
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT18:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $18
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INT19:
|
||||
push $0x0 # push error code place holder on the stack
|
||||
push $19
|
||||
JmpCommonIdtEntry
|
||||
|
||||
INTUnknown:
|
||||
.rept (32 - 20)
|
||||
push $0x0 # push error code place holder on the stack
|
||||
# push xxh # push vector number
|
||||
.byte 0x6a
|
||||
.byte ( . - INTUnknown - 3 ) / 9 + 20 # vector number
|
||||
JmpCommonIdtEntry
|
||||
.endr
|
||||
|
||||
.globl ASM_PFX(SystemTimerHandler)
|
||||
ASM_PFX(SystemTimerHandler):
|
||||
push $0
|
||||
push $ASM_PFX(mTimerVector)
|
||||
JmpCommonIdtEntry
|
||||
|
||||
commonIdtEntry:
|
||||
# +---------------------+
|
||||
# + EFlags +
|
||||
# +---------------------+
|
||||
# + CS +
|
||||
# +---------------------+
|
||||
# + EIP +
|
||||
# +---------------------+
|
||||
# + Error Code +
|
||||
# +---------------------+
|
||||
# + Vector Number +
|
||||
# +---------------------+
|
||||
# + EBP +
|
||||
# +---------------------+ <-- EBP
|
||||
|
||||
cli
|
||||
push %rbp
|
||||
movq %rsp,%rbp
|
||||
|
||||
#
|
||||
# Since here the stack pointer is 16-byte aligned, so
|
||||
# EFI_FX_SAVE_STATE_X64 of EFI_SYSTEM_CONTEXT_x64
|
||||
# is 16-byte aligned
|
||||
#
|
||||
|
||||
## UINT64 Rdi, Rsi, Rbp, Rsp, Rbx, Rdx, Rcx, Rax#
|
||||
## UINT64 R8, R9, R10, R11, R12, R13, R14, R15#
|
||||
push %r15
|
||||
push %r14
|
||||
push %r13
|
||||
push %r12
|
||||
push %r11
|
||||
push %r10
|
||||
push %r9
|
||||
push %r8
|
||||
push %rax
|
||||
push %rcx
|
||||
push %rdx
|
||||
push %rbx
|
||||
push 6*8(%rbp)
|
||||
push (%rbp)
|
||||
push %rsi
|
||||
push %rdi
|
||||
|
||||
## UINT64 Gs, Fs, Es, Ds, Cs, Ss# insure high 16 bits of each is zero
|
||||
movzx 7*8(%rbp), %rax
|
||||
push %rax # for ss
|
||||
movzx 4*8(%rbp), %rax
|
||||
push %rax # for cs
|
||||
movq %ds, %rax
|
||||
push %rax
|
||||
movq %es, %rax
|
||||
push %rax
|
||||
movq %fs, %rax
|
||||
push %rax
|
||||
movq %gs, %rax
|
||||
push %rax
|
||||
|
||||
## UINT64 Rip#
|
||||
push 3*8(%rbp)
|
||||
|
||||
## UINT64 Gdtr[2], Idtr[2]#
|
||||
subq $16, %rsp
|
||||
sidt (%rsp)
|
||||
subq $16, %rsp
|
||||
sgdt (%rsp)
|
||||
|
||||
## UINT64 Ldtr, Tr#
|
||||
xorq %rax, %rax
|
||||
str %ax
|
||||
push %rax
|
||||
sldt %ax
|
||||
push %rax
|
||||
|
||||
## UINT64 RFlags#
|
||||
push 5*8(%rbp)
|
||||
|
||||
## UINT64 Cr0, Cr1, Cr2, Cr3, Cr4, Cr8#
|
||||
movq %cr8, %rax
|
||||
push %rax
|
||||
movq %cr4, %rax
|
||||
orq $0x208, %rax
|
||||
movq %rax, %cr4
|
||||
push %rax
|
||||
movq %cr3, %rax
|
||||
push %rax
|
||||
movq %cr2, %rax
|
||||
push %rax
|
||||
xorq %rax, %rax
|
||||
push %rax
|
||||
movq %cr0, %rax
|
||||
push %rax
|
||||
|
||||
## UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7#
|
||||
movq %dr7, %rax
|
||||
push %rax
|
||||
|
||||
## clear Dr7 while executing debugger itself
|
||||
xorq %rax, %rax
|
||||
movq %rax, %dr7
|
||||
|
||||
movq %dr6, %rax
|
||||
push %rax
|
||||
|
||||
## insure all status bits in dr6 are clear...
|
||||
xorq %rax, %rax
|
||||
movq %rax, %dr6
|
||||
|
||||
movq %dr3, %rax
|
||||
push %rax
|
||||
movq %dr2, %rax
|
||||
push %rax
|
||||
movq %dr1, %rax
|
||||
push %rax
|
||||
movq %dr0, %rax
|
||||
push %rax
|
||||
|
||||
|
||||
## FX_SAVE_STATE_X64 FxSaveState#
|
||||
subq $512, %rsp
|
||||
movq %rsp, %rdi
|
||||
fxsave (%rdi)
|
||||
|
||||
## UINT64 ExceptionData#
|
||||
push 2*8 (%rbp)
|
||||
|
||||
## call into exception handler
|
||||
## Prepare parameter and call
|
||||
movq 1*8(%rbp), %rcx
|
||||
movq %rsp, %rdx
|
||||
#
|
||||
# Per X64 calling convention, allocate maximum parameter stack space
|
||||
# and make sure RSP is 16-byte aligned
|
||||
#
|
||||
subq $(4*8+8), %rsp
|
||||
cmpq $32, %rcx
|
||||
jb CallException
|
||||
call ASM_PFX(TimerHandler)
|
||||
jmp ExceptionDone
|
||||
CallException:
|
||||
call ASM_PFX(ExceptionHandler)
|
||||
ExceptionDone:
|
||||
addq $(4*8+8), %rsp
|
||||
|
||||
cli
|
||||
|
||||
## UINT64 ExceptionData#
|
||||
addq $8, %rsp
|
||||
|
||||
## FX_SAVE_STATE_X64 FxSaveState#
|
||||
movq %rsp, %rsi
|
||||
fxrstor (%esi)
|
||||
addq $512, %rsp
|
||||
|
||||
|
||||
## UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7#
|
||||
pop %rax
|
||||
movq %rax, %dr0
|
||||
pop %rax
|
||||
movq %rax, %dr1
|
||||
pop %rax
|
||||
movq %rax, %dr2
|
||||
pop %rax
|
||||
movq %rax, %dr3
|
||||
## skip restore of dr6. We cleared dr6 during the context save.
|
||||
addq $8, %rsp
|
||||
pop %rax
|
||||
movq %rax, %dr7
|
||||
|
||||
## UINT64 Cr0, Cr1, Cr2, Cr3, Cr4, Cr8#
|
||||
pop %rax
|
||||
movq %rax, %cr0
|
||||
addq $8, %rsp # not for Cr1
|
||||
pop %rax
|
||||
movq %rax, %cr2
|
||||
pop %rax
|
||||
movq %rax, %cr3
|
||||
pop %rax
|
||||
movq %rax, %cr4
|
||||
pop %rax
|
||||
mov %rax, %cr8
|
||||
|
||||
## UINT64 RFlags#
|
||||
pop 5*8(%rbp)
|
||||
|
||||
## UINT64 Ldtr, Tr#
|
||||
## UINT64 Gdtr[2], Idtr[2]#
|
||||
## Best not let anyone mess with these particular registers...
|
||||
addq $48, %rsp
|
||||
|
||||
## UINT64 Rip#
|
||||
pop 3*8(%rbp)
|
||||
|
||||
## UINT64 Gs, Fs, Es, Ds, Cs, Ss#
|
||||
pop %rax
|
||||
# mov gs, rax # not for gs
|
||||
pop %rax
|
||||
# mov fs, rax # not for fs
|
||||
# (X64 will not use fs and gs, so we do not restore it)
|
||||
pop %rax
|
||||
movq %rax, %es
|
||||
pop %rax
|
||||
movq %rax, %ds
|
||||
pop 4*8(%rbp) # for cs
|
||||
pop 7*8(%rbp) # for ss
|
||||
|
||||
## UINT64 Rdi, Rsi, Rbp, Rsp, Rbx, Rdx, Rcx, Rax#
|
||||
## UINT64 R8, R9, R10, R11, R12, R13, R14, R15#
|
||||
pop %rdi
|
||||
pop %rsi
|
||||
addq $8, %rsp # not for rbp
|
||||
pop 6*8(%rbp) # for rsp
|
||||
pop %rbx
|
||||
pop %rdx
|
||||
pop %rcx
|
||||
pop %rax
|
||||
pop %r8
|
||||
pop %r9
|
||||
pop %r10
|
||||
pop %r11
|
||||
pop %r12
|
||||
pop %r13
|
||||
pop %r14
|
||||
pop %r15
|
||||
|
||||
movq %rbp, %rsp
|
||||
pop %rbp
|
||||
addq $16, %rsp
|
||||
iretq
|
||||
|
||||
|
||||
##############################################################################
|
||||
# data
|
||||
##############################################################################
|
||||
|
||||
.data
|
||||
.align 0x10
|
||||
|
||||
gdtr: .short GDT_END - GDT_BASE - 1 # GDT limit
|
||||
.quad 0 # (GDT base gets set above)
|
||||
##############################################################################
|
||||
# global descriptor table (GDT)
|
||||
##############################################################################
|
||||
|
||||
.align 0x10
|
||||
|
||||
GDT_BASE:
|
||||
# null descriptor
|
||||
NULL_SEL = .-GDT_BASE
|
||||
.short 0 # limit 15:0
|
||||
.short 0 # base 15:0
|
||||
.byte 0 # base 23:16
|
||||
.byte 0 # type
|
||||
.byte 0 # limit 19:16, flags
|
||||
.byte 0 # base 31:24
|
||||
|
||||
# linear data segment descriptor
|
||||
LINEAR_SEL = .-GDT_BASE
|
||||
.short 0x0FFFF # limit 0xFFFFF
|
||||
.short 0 # base 0
|
||||
.byte 0
|
||||
.byte 0x092 # present, ring 0, data, expand-up, writable
|
||||
.byte 0x0CF # page-granular, 32-bit
|
||||
.byte 0
|
||||
|
||||
# linear code segment descriptor
|
||||
LINEAR_CODE_SEL = .-GDT_BASE
|
||||
.short 0x0FFFF # limit 0xFFFFF
|
||||
.short 0 # base 0
|
||||
.byte 0
|
||||
.byte 0x09A # present, ring 0, data, expand-up, writable
|
||||
.byte 0x0CF # page-granular, 32-bit
|
||||
.byte 0
|
||||
|
||||
# system data segment descriptor
|
||||
SYS_DATA_SEL = .-GDT_BASE
|
||||
.short 0x0FFFF # limit 0xFFFFF
|
||||
.short 0 # base 0
|
||||
.byte 0
|
||||
.byte 0x092 # present, ring 0, data, expand-up, writable
|
||||
.byte 0x0CF # page-granular, 32-bit
|
||||
.byte 0
|
||||
|
||||
# system code segment descriptor
|
||||
SYS_CODE_SEL = .-GDT_BASE
|
||||
.short 0x0FFFF # limit 0xFFFFF
|
||||
.short 0 # base 0
|
||||
.byte 0
|
||||
.byte 0x09A # present, ring 0, data, expand-up, writable
|
||||
.byte 0x0CF # page-granular, 32-bit
|
||||
.byte 0
|
||||
|
||||
# spare segment descriptor
|
||||
SPARE3_SEL = .-GDT_BASE
|
||||
.short 0 # limit 0xFFFFF
|
||||
.short 0 # base 0
|
||||
.byte 0
|
||||
.byte 0 # present, ring 0, data, expand-up, writable
|
||||
.byte 0 # page-granular, 32-bit
|
||||
.byte 0
|
||||
|
||||
# spare segment descriptor
|
||||
SPARE4_SEL = .-GDT_BASE
|
||||
.short 0 # limit 0xFFFFF
|
||||
.short 0 # base 0
|
||||
.byte 0
|
||||
.byte 0 # present, ring 0, data, expand-up, writable
|
||||
.byte 0 # page-granular, 32-bit
|
||||
.byte 0
|
||||
|
||||
# spare segment descriptor
|
||||
SPARE5_SEL = .-GDT_BASE
|
||||
.short 0 # limit 0xFFFFF
|
||||
.short 0 # base 0
|
||||
.byte 0
|
||||
.byte 0 # present, ring 0, data, expand-up, writable
|
||||
.byte 0 # page-granular, 32-bit
|
||||
.byte 0
|
||||
|
||||
GDT_END:
|
||||
|
||||
.align 0x4
|
||||
|
||||
|
||||
|
||||
idtr: .short IDT_END - IDT_BASE - 1 # IDT limit
|
||||
.quad 0 # (IDT base gets set above)
|
||||
##############################################################################
|
||||
# interrupt descriptor table (IDT)
|
||||
#
|
||||
# Note: The hardware IRQ's specified in this table are the normal PC/AT IRQ
|
||||
# mappings. This implementation only uses the system timer and all other
|
||||
# IRQs will remain masked. The descriptors for vectors 33+ are provided
|
||||
# for convenience.
|
||||
##############################################################################
|
||||
|
||||
#idt_tag .byte "IDT",0
|
||||
.align 0x4
|
||||
|
||||
IDT_BASE:
|
||||
# divide by zero (INT 0)
|
||||
DIV_ZERO_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# debug exception (INT 1)
|
||||
DEBUG_EXCEPT_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# NMI (INT 2)
|
||||
NMI_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# soft breakpoint (INT 3)
|
||||
BREAKPOINT_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# overflow (INT 4)
|
||||
OVERFLOW_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# bounds check (INT 5)
|
||||
BOUNDS_CHECK_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# invalid opcode (INT 6)
|
||||
INVALID_OPCODE_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# device not available (INT 7)
|
||||
DEV_NOT_AVAIL_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# double fault (INT 8)
|
||||
DOUBLE_FAULT_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# Coprocessor segment overrun - reserved (INT 9)
|
||||
RSVD_INTR_SEL1 = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# invalid TSS (INT 0ah)
|
||||
INVALID_TSS_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# segment not present (INT 0bh)
|
||||
SEG_NOT_PRESENT_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# stack fault (INT 0ch)
|
||||
STACK_FAULT_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# general protection (INT 0dh)
|
||||
GP_FAULT_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# page fault (INT 0eh)
|
||||
PAGE_FAULT_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# Intel reserved - do not use (INT 0fh)
|
||||
RSVD_INTR_SEL2 = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# floating point error (INT 0x10)
|
||||
FLT_POINT_ERR_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# alignment check (INT 0x11)
|
||||
ALIGNMENT_CHECK_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# machine check (INT 0x12)
|
||||
MACHINE_CHECK_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# SIMD floating-point exception (INT 0x13)
|
||||
SIMD_EXCEPTION_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
.rept (32 - 20)
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
.endr
|
||||
|
||||
# 72 unspecified descriptors
|
||||
.rept 72 * 8
|
||||
.byte 0
|
||||
.endr
|
||||
|
||||
# IRQ 0 (System timer) - (INT 0x68)
|
||||
IRQ0_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 1 (8042 Keyboard controller) - (INT 0x69)
|
||||
IRQ1_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# Reserved - IRQ 2 redirect (IRQ 2) - DO NOT USE!!! - (INT 6ah)
|
||||
IRQ2_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 3 (COM 2) - (INT 6bh)
|
||||
IRQ3_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 4 (COM 1) - (INT 6ch)
|
||||
IRQ4_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 5 (LPT 2) - (INT 6dh)
|
||||
IRQ5_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 6 (Floppy controller) - (INT 6eh)
|
||||
IRQ6_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 7 (LPT 1) - (INT 6fh)
|
||||
IRQ7_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 8 (RTC Alarm) - (INT 0x70)
|
||||
IRQ8_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 9 - (INT 0x71)
|
||||
IRQ9_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 10 - (INT 0x72)
|
||||
IRQ10_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 11 - (INT 0x73)
|
||||
IRQ11_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 12 (PS/2 mouse) - (INT 0x74)
|
||||
IRQ12_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 13 (Floating point error) - (INT 0x75)
|
||||
IRQ13_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 14 (Secondary IDE) - (INT 0x76)
|
||||
IRQ14_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
# IRQ 15 (Primary IDE) - (INT 0x77)
|
||||
IRQ15_SEL = .-IDT_BASE
|
||||
.short 0 # offset 15:0
|
||||
.short SYS_CODE_SEL # selector 15:0
|
||||
.byte 0 # 0 for interrupt gate
|
||||
.byte 0x0e | 0x80 # (10001110)type = 386 interrupt gate, present
|
||||
.short 0 # offset 31:16
|
||||
|
||||
.rept 1 * 16
|
||||
.byte 0
|
||||
.endr
|
||||
|
||||
IDT_END:
|
||||
|
||||
|
|
@ -630,7 +630,7 @@ ScanPciRootBridgeForRoms(
|
|||
//
|
||||
// Find Memory Descriptors that are less than 4GB, so the PPB Memory Window can be used for downstream devices
|
||||
//
|
||||
if (Descriptors->AddrRangeMax < 0x100000000) {
|
||||
if (Descriptors->AddrRangeMax < 0x100000000ULL) {
|
||||
//
|
||||
// Find the largest Non-Prefetchable Memory Descriptor that is less than 4GB
|
||||
//
|
||||
|
|
|
|||
Loading…
Reference in New Issue