tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

MdeModulePkg: Add PciSioSerialDxe driver 

PciSioSerialDxe driver can manages UARTs on a SIO chip or a PCI/PCIE
card.
It manages the SIO instance whose last device path node is a ACPI
device path and the HID in the ACPI device path node equals to
EISA_PNP_ID (0x501).
It also manages the PCI IO instance whose class code is 7/0/2 (16550
UART). But when proper value is set to PcdPciSerialParameters, the
driver can also manage non-standard PCI serial cards by matching
the Vendor ID and Device ID specified in PcdPciSerialParameters.
The PCI BAR index, IO/MMIO offset, register stride, clock rate can
also be specified through the same PCD.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19179 6f19259b-4bc3-4df7-8a09-765794883524
This commit is contained in:
Ruiyu Ni 2015-12-10 02:47:16 +00:00 committed by niruiyu
parent 00c0c3f24f
commit a59e2edebe
9 changed files with 3759 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

288
MdeModulePkg/Bus/Pci/PciSioSerialDxe/ComponentName.c Normal file
View File

@ -0,0 +1,288 @@
/** @file
UEFI Component Name and Name2 protocol for Isa serial driver.
Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "Serial.h"
//
// EFI Component Name Protocol
//
GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gPciSioSerialComponentName = {
SerialComponentNameGetDriverName,
SerialComponentNameGetControllerName,
"eng"
};
//
// EFI Component Name 2 Protocol
//
GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gPciSioSerialComponentName2 = {
(EFI_COMPONENT_NAME2_GET_DRIVER_NAME) SerialComponentNameGetDriverName,
(EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) SerialComponentNameGetControllerName,
"en"
};
GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mSerialDriverNameTable[] = {
{
"eng;en",
L"PCI SIO Serial Driver"
},
{
NULL,
NULL
}
};
GLOBAL_REMOVE_IF_UNREFERENCED CHAR16 mSioSerialPortName[] = L"SIO Serial Port #%d";
GLOBAL_REMOVE_IF_UNREFERENCED CHAR16 mPciSerialPortName[] = L"PCI Serial Port #%d";
/**
Retrieves a Unicode string that is the user readable name of the driver.
This function retrieves the user readable name of a driver in the form of a
Unicode string. If the driver specified by This has a user readable name in
the language specified by Language, then a pointer to the driver name is
returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
by This does not support the language specified by Language,
then EFI_UNSUPPORTED is returned.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@param Language[in] A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
languages specified in SupportedLanguages. The
number of languages supported by a driver is up
to the driver writer. Language is specified
in RFC 4646 or ISO 639-2 language code format.
@param DriverName[out] A pointer to the Unicode string to return.
This Unicode string is the name of the
driver specified by This in the language
specified by Language.
@retval EFI_SUCCESS The Unicode string for the Driver specified by
This and the language specified by Language was
returned in DriverName.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER DriverName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
**/
EFI_STATUS
EFIAPI
SerialComponentNameGetDriverName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN CHAR8 *Language,
OUT CHAR16 **DriverName
)
{
return LookupUnicodeString2 (
Language,
This->SupportedLanguages,
mSerialDriverNameTable,
DriverName,
(BOOLEAN)(This == &gPciSioSerialComponentName)
);
}
/**
Retrieves a Unicode string that is the user readable name of the controller
that is being managed by a driver.
This function retrieves the user readable name of the controller specified by
ControllerHandle and ChildHandle in the form of a Unicode string. If the
driver specified by This has a user readable name in the language specified by
Language, then a pointer to the controller name is returned in ControllerName,
and EFI_SUCCESS is returned. If the driver specified by This is not currently
managing the controller specified by ControllerHandle and ChildHandle,
then EFI_UNSUPPORTED is returned. If the driver specified by This does not
support the language specified by Language, then EFI_UNSUPPORTED is returned.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@param ControllerHandle[in] The handle of a controller that the driver
specified by This is managing. This handle
specifies the controller whose name is to be
returned.
@param ChildHandle[in] The handle of the child controller to retrieve
the name of. This is an optional parameter that
may be NULL. It will be NULL for device
drivers. It will also be NULL for a bus drivers
that wish to retrieve the name of the bus
controller. It will not be NULL for a bus
driver that wishes to retrieve the name of a
child controller.
@param Language[in] A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
languages specified in SupportedLanguages. The
number of languages supported by a driver is up
to the driver writer. Language is specified in
RFC 4646 or ISO 639-2 language code format.
@param ControllerName[out] A pointer to the Unicode string to return.
This Unicode string is the name of the
controller specified by ControllerHandle and
ChildHandle in the language specified by
Language from the point of view of the driver
specified by This.
@retval EFI_SUCCESS The Unicode string for the user readable name in
the language specified by Language for the
driver specified by This was returned in
DriverName.
@retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
@retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
EFI_HANDLE.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER ControllerName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This is not currently
managing the controller specified by
ControllerHandle and ChildHandle.
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
**/
EFI_STATUS
EFIAPI
SerialComponentNameGetControllerName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN EFI_HANDLE ChildHandle OPTIONAL,
IN CHAR8 *Language,
OUT CHAR16 **ControllerName
)
{
EFI_STATUS Status;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
SERIAL_DEV *SerialDevice;
EFI_UNICODE_STRING_TABLE *ControllerNameTable;
EFI_GUID *IoProtocolGuid;
//
// Make sure this driver is currently managing ControllerHandle
//
IoProtocolGuid = &gEfiSioProtocolGuid;
Status = EfiTestManagedDevice (
ControllerHandle,
gSerialControllerDriver.DriverBindingHandle,
IoProtocolGuid
);
if (EFI_ERROR (Status)) {
IoProtocolGuid = &gEfiPciIoProtocolGuid;
Status = EfiTestManagedDevice (
ControllerHandle,
gSerialControllerDriver.DriverBindingHandle,
IoProtocolGuid
);
}
if (EFI_ERROR (Status)) {
return Status;
}
ControllerNameTable = NULL;
if (ChildHandle != NULL) {
Status = EfiTestChildHandle (
ControllerHandle,
ChildHandle,
IoProtocolGuid
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Get the Serial I/O Protocol from the child handle
//
Status = gBS->OpenProtocol (
ChildHandle,
&gEfiSerialIoProtocolGuid,
(VOID **) &SerialIo,
gSerialControllerDriver.DriverBindingHandle,
ChildHandle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Get the Serial Controller's Device structure
//
SerialDevice = SERIAL_DEV_FROM_THIS (SerialIo);
ControllerNameTable = SerialDevice->ControllerNameTable;
}
return LookupUnicodeString2 (
Language,
This->SupportedLanguages,
ControllerNameTable,
ControllerName,
(BOOLEAN)(This == &gPciSioSerialComponentName)
);
}
/**
Add the ISO639-2 and RFC4646 component name both for the Serial IO device
@param SerialDevice A pointer to the SERIAL_DEV instance.
@param Instance Instance ID for the serial device.
**/
VOID
AddName (
IN SERIAL_DEV *SerialDevice,
IN UINT32 Instance
)
{
CHAR16 SerialPortName[SERIAL_PORT_NAME_LEN];
UnicodeSPrint (
SerialPortName,
sizeof (SerialPortName),
(SerialDevice->PciDeviceInfo != NULL) ? PCI_SERIAL_PORT_NAME : SIO_SERIAL_PORT_NAME,
Instance
);
AddUnicodeString2 (
"eng",
gPciSioSerialComponentName.SupportedLanguages,
&SerialDevice->ControllerNameTable,
SerialPortName,
TRUE
);
AddUnicodeString2 (
"en",
gPciSioSerialComponentName2.SupportedLanguages,
&SerialDevice->ControllerNameTable,
SerialPortName,
FALSE
);
}

81
MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf Normal file
View File

@ -0,0 +1,81 @@
## @file
# Serial driver for standard UARTS on a SIO chip or PCI/PCIE card.
#
# Produces the Serial I/O protocol for standard UARTS using Super I/O or PCI I/O.
#
# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
[Defines]
INF_VERSION = 0x00010005
BASE_NAME = PciSioSerialDxe
MODULE_UNI_FILE = PciSioSerialDxe.uni
FILE_GUID = E2775B47-D453-4EE3-ADA7-391A1B05AC17
MODULE_TYPE = UEFI_DRIVER
VERSION_STRING = 1.0
ENTRY_POINT = InitializePciSioSerial
#
# The following information is for reference only and not required by the build tools.
#
# VALID_ARCHITECTURES = IA32 X64 IPF EBC
#
# DRIVER_BINDING = gSerialControllerDriver
# COMPONENT_NAME = gPciSioSerialComponentName
# COMPONENT_NAME2 = gPciSioSerialComponentName2
#
[Sources]
ComponentName.c
SerialIo.c
Serial.h
Serial.c
[Packages]
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
[LibraryClasses]
PcdLib
ReportStatusCodeLib
UefiBootServicesTableLib
MemoryAllocationLib
BaseMemoryLib
DevicePathLib
UefiLib
UefiDriverEntryPoint
DebugLib
IoLib
[Guids]
gEfiUartDevicePathGuid ## SOMETIMES_CONSUMES ## GUID
[Protocols]
gEfiSioProtocolGuid ## TO_START
gEfiDevicePathProtocolGuid ## TO_START
gEfiPciIoProtocolGuid ## TO_START
gEfiSerialIoProtocolGuid ## BY_START
gEfiDevicePathProtocolGuid ## BY_START
[FeaturePcd]
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE ## CONSUMES
[Pcd]
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200 ## CONSUMES
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits|8 ## CONSUMES
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity|1 ## CONSUMES
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits|1 ## CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200 ## CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters ## CONSUMES
[UserExtensions.TianoCore."ExtraFiles"]
PciSioSerialDxeExtra.uni

BIN
MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.uni Normal file
View File

Binary file not shown.

BIN
MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxeExtra.uni Normal file
View File

Binary file not shown.

1242
MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.c Normal file
View File

File diff suppressed because it is too large Load Diff

789
MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.h Normal file
View File

@ -0,0 +1,789 @@
/** @file
Header file for PciSioSerial Driver
Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _SERIAL_H_
#define _SERIAL_H_
#include <Uefi.h>
#include <IndustryStandard/Pci.h>
#include <Protocol/SuperIo.h>
#include <Protocol/PciIo.h>
#include <Protocol/SerialIo.h>
#include <Protocol/DevicePath.h>
#include <Library/DebugLib.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/UefiLib.h>
#include <Library/DevicePathLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/ReportStatusCodeLib.h>
#include <Library/PcdLib.h>
#include <Library/IoLib.h>
#include <Library/PrintLib.h>
//
// Driver Binding Externs
//
extern EFI_DRIVER_BINDING_PROTOCOL gSerialControllerDriver;
extern EFI_COMPONENT_NAME_PROTOCOL gPciSioSerialComponentName;
extern EFI_COMPONENT_NAME2_PROTOCOL gPciSioSerialComponentName2;
#define SIO_SERIAL_PORT_NAME L"SIO Serial Port #%d"
#define PCI_SERIAL_PORT_NAME L"PCI Serial Port #%d"
#define SERIAL_PORT_NAME_LEN (sizeof (SIO_SERIAL_PORT_NAME) / sizeof (CHAR16) + MAXIMUM_VALUE_CHARACTERS)
//
// Internal Data Structures
//
#define TIMEOUT_STALL_INTERVAL 10
#pragma pack(1)
///
/// PcdPciSerialParameters contains zero or more instances of the below structure.
/// If a PCI device contains multiple UARTs, PcdPciSerialParameters needs to contain
/// two instances of the below structure, with the VendorId and DeviceId equals to the
/// device ID and vendor ID of the device. If the PCI device uses the first two BARs
/// to support multiple UARTs, BarIndex of first instance equals to 0 and BarIndex of
/// second one equals to 1; if the PCI device uses the first BAR to support multiple
/// UARTs, BarIndex of both instance equals to 0 and Offset of first instance equals
/// to 0 while Offset of second one equals to some value bigger or equal to 8.
/// For certain UART whose register needs to be accessed in DWORD aligned address,
/// RegisterStride equals to 4.
///
typedef struct {
UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.
UINT16 DeviceId; ///< Device ID to match the PCI device
UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz
UINT64 Offset; ///< The byte offset into to the BAR
UINT8 BarIndex; ///< Which BAR to get the UART base address
UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.
UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
UINT8 Reserved[2];
} PCI_SERIAL_PARAMETER;
#pragma pack()
#define SERIAL_MAX_FIFO_SIZE 17 ///< Actual FIFO size is 16. FIFO based on circular wastes one unit.
typedef struct {
UINT16 Head; ///< Head pointer of the FIFO. Empty when (Head == Tail).
UINT16 Tail; ///< Tail pointer of the FIFO. Full when ((Tail + 1) % SERIAL_MAX_FIFO_SIZE == Head).
UINT8 Data[SERIAL_MAX_FIFO_SIZE]; ///< Store the FIFO data.
} SERIAL_DEV_FIFO;
typedef union {
EFI_PCI_IO_PROTOCOL *PciIo;
EFI_SIO_PROTOCOL *Sio;
} PARENT_IO_PROTOCOL_PTR;
typedef struct {
EFI_PCI_IO_PROTOCOL *PciIo; // Pointer to parent PciIo instance.
UINTN ChildCount; // Count of child SerialIo instance.
UINT64 PciAttributes; // Original PCI attributes.
} PCI_DEVICE_INFO;
typedef struct {
UINT32 Signature;
EFI_HANDLE Handle;
EFI_SERIAL_IO_PROTOCOL SerialIo;
EFI_SERIAL_IO_MODE SerialMode;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
UART_DEVICE_PATH UartDevicePath;
EFI_PHYSICAL_ADDRESS BaseAddress; ///< UART base address
BOOLEAN MmioAccess; ///< TRUE for MMIO, FALSE for IO
UINT8 RegisterStride; ///< UART Register Stride
UINT32 ClockRate; ///< UART clock rate
UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes.
SERIAL_DEV_FIFO Receive; ///< The FIFO used to store received data
UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes.
SERIAL_DEV_FIFO Transmit; ///< The FIFO used to store to-transmit data
BOOLEAN SoftwareLoopbackEnable;
BOOLEAN HardwareFlowControl;
EFI_UNICODE_STRING_TABLE *ControllerNameTable;
BOOLEAN ContainsControllerNode; ///< TRUE if the device produced contains Controller node
UINT32 Instance;
PCI_DEVICE_INFO *PciDeviceInfo;
} SERIAL_DEV;
#define SERIAL_DEV_SIGNATURE SIGNATURE_32 ('s', 'e', 'r', 'd')
#define SERIAL_DEV_FROM_THIS(a) CR (a, SERIAL_DEV, SerialIo, SERIAL_DEV_SIGNATURE)
//
// Serial Driver Defaults
//
#define SERIAL_PORT_DEFAULT_TIMEOUT 1000000
#define SERIAL_PORT_SUPPORT_CONTROL_MASK (EFI_SERIAL_CLEAR_TO_SEND | \
EFI_SERIAL_DATA_SET_READY | \
EFI_SERIAL_RING_INDICATE | \
EFI_SERIAL_CARRIER_DETECT | \
EFI_SERIAL_REQUEST_TO_SEND | \
EFI_SERIAL_DATA_TERMINAL_READY | \
EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | \
EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE | \
EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE | \
EFI_SERIAL_OUTPUT_BUFFER_EMPTY | \
EFI_SERIAL_INPUT_BUFFER_EMPTY)
#define SERIAL_PORT_MIN_TIMEOUT 1 // 1 uS
#define SERIAL_PORT_MAX_TIMEOUT 100000000 // 100 seconds
//
// UART Registers
//
#define SERIAL_REGISTER_THR 0 ///< WO Transmit Holding Register
#define SERIAL_REGISTER_RBR 0 ///< RO Receive Buffer Register
#define SERIAL_REGISTER_DLL 0 ///< R/W Divisor Latch LSB
#define SERIAL_REGISTER_DLM 1 ///< R/W Divisor Latch MSB
#define SERIAL_REGISTER_IER 1 ///< R/W Interrupt Enable Register
#define SERIAL_REGISTER_IIR 2 ///< RO Interrupt Identification Register
#define SERIAL_REGISTER_FCR 2 ///< WO FIFO Cotrol Register
#define SERIAL_REGISTER_LCR 3 ///< R/W Line Control Register
#define SERIAL_REGISTER_MCR 4 ///< R/W Modem Control Register
#define SERIAL_REGISTER_LSR 5 ///< R/W Line Status Register
#define SERIAL_REGISTER_MSR 6 ///< R/W Modem Status Register
#define SERIAL_REGISTER_SCR 7 ///< R/W Scratch Pad Register
#pragma pack(1)
///
/// Interrupt Enable Register
///
typedef union {
struct {
UINT8 Ravie : 1; ///< Receiver Data Available Interrupt Enable
UINT8 Theie : 1; ///< Transmistter Holding Register Empty Interrupt Enable
UINT8 Rie : 1; ///< Receiver Interrupt Enable
UINT8 Mie : 1; ///< Modem Interrupt Enable
UINT8 Reserved : 4;
} Bits;
UINT8 Data;
} SERIAL_PORT_IER;
///
/// FIFO Control Register
///
typedef union {
struct {
UINT8 TrFIFOE : 1; ///< Transmit and Receive FIFO Enable
UINT8 ResetRF : 1; ///< Reset Reciever FIFO
UINT8 ResetTF : 1; ///< Reset Transmistter FIFO
UINT8 Dms : 1; ///< DMA Mode Select
UINT8 Reserved : 1;
UINT8 TrFIFO64 : 1; ///< Enable 64 byte FIFO
UINT8 Rtb : 2; ///< Receive Trigger Bits
} Bits;
UINT8 Data;
} SERIAL_PORT_FCR;
///
/// Line Control Register
///
typedef union {
struct {
UINT8 SerialDB : 2; ///< Number of Serial Data Bits
UINT8 StopB : 1; ///< Number of Stop Bits
UINT8 ParEn : 1; ///< Parity Enable
UINT8 EvenPar : 1; ///< Even Parity Select
UINT8 SticPar : 1; ///< Sticky Parity
UINT8 BrCon : 1; ///< Break Control
UINT8 DLab : 1; ///< Divisor Latch Access Bit
} Bits;
UINT8 Data;
} SERIAL_PORT_LCR;
///
/// Modem Control Register
///
typedef union {
struct {
UINT8 DtrC : 1; ///< Data Terminal Ready Control
UINT8 Rts : 1; ///< Request To Send Control
UINT8 Out1 : 1; ///< Output1
UINT8 Out2 : 1; ///< Output2, used to disable interrupt
UINT8 Lme : 1; ///< Loopback Mode Enable
UINT8 Reserved : 3;
} Bits;
UINT8 Data;
} SERIAL_PORT_MCR;
///
/// Line Status Register
///
typedef union {
struct {
UINT8 Dr : 1; ///< Receiver Data Ready Status
UINT8 Oe : 1; ///< Overrun Error Status
UINT8 Pe : 1; ///< Parity Error Status
UINT8 Fe : 1; ///< Framing Error Status
UINT8 Bi : 1; ///< Break Interrupt Status
UINT8 Thre : 1; ///< Transmistter Holding Register Status
UINT8 Temt : 1; ///< Transmitter Empty Status
UINT8 FIFOe : 1; ///< FIFO Error Status
} Bits;
UINT8 Data;
} SERIAL_PORT_LSR;
///
/// Modem Status Register
///
typedef union {
struct {
UINT8 DeltaCTS : 1; ///< Delta Clear To Send Status
UINT8 DeltaDSR : 1; ///< Delta Data Set Ready Status
UINT8 TrailingEdgeRI : 1; ///< Trailing Edge of Ring Indicator Status
UINT8 DeltaDCD : 1; ///< Delta Data Carrier Detect Status
UINT8 Cts : 1; ///< Clear To Send Status
UINT8 Dsr : 1; ///< Data Set Ready Status
UINT8 Ri : 1; ///< Ring Indicator Status
UINT8 Dcd : 1; ///< Data Carrier Detect Status
} Bits;
UINT8 Data;
} SERIAL_PORT_MSR;
#pragma pack()
//
// Define serial register I/O macros
//
#define READ_RBR(S) SerialReadRegister (S, SERIAL_REGISTER_RBR)
#define READ_DLL(S) SerialReadRegister (S, SERIAL_REGISTER_DLL)
#define READ_DLM(S) SerialReadRegister (S, SERIAL_REGISTER_DLM)
#define READ_IER(S) SerialReadRegister (S, SERIAL_REGISTER_IER)
#define READ_IIR(S) SerialReadRegister (S, SERIAL_REGISTER_IIR)
#define READ_LCR(S) SerialReadRegister (S, SERIAL_REGISTER_LCR)
#define READ_MCR(S) SerialReadRegister (S, SERIAL_REGISTER_MCR)
#define READ_LSR(S) SerialReadRegister (S, SERIAL_REGISTER_LSR)
#define READ_MSR(S) SerialReadRegister (S, SERIAL_REGISTER_MSR)
#define READ_SCR(S) SerialReadRegister (S, SERIAL_REGISTER_SCR)
#define WRITE_THR(S, D) SerialWriteRegister (S, SERIAL_REGISTER_THR, D)
#define WRITE_DLL(S, D) SerialWriteRegister (S, SERIAL_REGISTER_DLL, D)
#define WRITE_DLM(S, D) SerialWriteRegister (S, SERIAL_REGISTER_DLM, D)
#define WRITE_IER(S, D) SerialWriteRegister (S, SERIAL_REGISTER_IER, D)
#define WRITE_FCR(S, D) SerialWriteRegister (S, SERIAL_REGISTER_FCR, D)
#define WRITE_LCR(S, D) SerialWriteRegister (S, SERIAL_REGISTER_LCR, D)
#define WRITE_MCR(S, D) SerialWriteRegister (S, SERIAL_REGISTER_MCR, D)
#define WRITE_LSR(S, D) SerialWriteRegister (S, SERIAL_REGISTER_LSR, D)
#define WRITE_MSR(S, D) SerialWriteRegister (S, SERIAL_REGISTER_MSR, D)
#define WRITE_SCR(S, D) SerialWriteRegister (S, SERIAL_REGISTER_SCR, D)
//
// Prototypes
// Driver model protocol interface
//
/**
Check to see if this driver supports the given controller
@param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param Controller The handle of the controller to test.
@param RemainingDevicePath A pointer to the remaining portion of a device path.
@return EFI_SUCCESS This driver can support the given controller
**/
EFI_STATUS
EFIAPI
SerialControllerDriverSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Start to management the controller passed in
@param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param Controller The handle of the controller to test.
@param RemainingDevicePath A pointer to the remaining portion of a device path.
@return EFI_SUCCESS Driver is started successfully
**/
EFI_STATUS
EFIAPI
SerialControllerDriverStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Disconnect this driver with the controller, uninstall related protocol instance
@param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param Controller The handle of the controller to test.
@param NumberOfChildren Number of child device.
@param ChildHandleBuffer A pointer to the remaining portion of a device path.
@retval EFI_SUCCESS Operation successfully
@retval EFI_DEVICE_ERROR Cannot stop the driver successfully
**/
EFI_STATUS
EFIAPI
SerialControllerDriverStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
);
//
// Serial I/O Protocol Interface
//
/**
Reset serial device.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@retval EFI_SUCCESS Reset successfully
@retval EFI_DEVICE_ERROR Failed to reset
**/
EFI_STATUS
EFIAPI
SerialReset (
IN EFI_SERIAL_IO_PROTOCOL *This
);
/**
Set new attributes to a serial device.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@param BaudRate The baudrate of the serial device
@param ReceiveFifoDepth The depth of receive FIFO buffer
@param Timeout The request timeout for a single char
@param Parity The type of parity used in serial device
@param DataBits Number of databits used in serial device
@param StopBits Number of stopbits used in serial device
@retval EFI_SUCCESS The new attributes were set
@retval EFI_INVALID_PARAMETERS One or more attributes have an unsupported value
@retval EFI_UNSUPPORTED Data Bits can not set to 5 or 6
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly (no return)
**/
EFI_STATUS
EFIAPI
SerialSetAttributes (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN UINT64 BaudRate,
IN UINT32 ReceiveFifoDepth,
IN UINT32 Timeout,
IN EFI_PARITY_TYPE Parity,
IN UINT8 DataBits,
IN EFI_STOP_BITS_TYPE StopBits
);
/**
Set Control Bits.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@param Control Control bits that can be settable
@retval EFI_SUCCESS New Control bits were set successfully
@retval EFI_UNSUPPORTED The Control bits wanted to set are not supported
**/
EFI_STATUS
EFIAPI
SerialSetControl (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN UINT32 Control
);
/**
Get ControlBits.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@param Control Control signals of the serial device
@retval EFI_SUCCESS Get Control signals successfully
**/
EFI_STATUS
EFIAPI
SerialGetControl (
IN EFI_SERIAL_IO_PROTOCOL *This,
OUT UINT32 *Control
);
/**
Write the specified number of bytes to serial device.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@param BufferSize On input the size of Buffer, on output the amount of
data actually written
@param Buffer The buffer of data to write
@retval EFI_SUCCESS The data were written successfully
@retval EFI_DEVICE_ERROR The device reported an error
@retval EFI_TIMEOUT The write operation was stopped due to timeout
**/
EFI_STATUS
EFIAPI
SerialWrite (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
IN VOID *Buffer
);
/**
Read the specified number of bytes from serial device.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@param BufferSize On input the size of Buffer, on output the amount of
data returned in buffer
@param Buffer The buffer to return the data into
@retval EFI_SUCCESS The data were read successfully
@retval EFI_DEVICE_ERROR The device reported an error
@retval EFI_TIMEOUT The read operation was stopped due to timeout
**/
EFI_STATUS
EFIAPI
SerialRead (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
OUT VOID *Buffer
);
//
// Internal Functions
//
/**
Use scratchpad register to test if this serial port is present.
@param SerialDevice Pointer to serial device structure
@return if this serial port is present
**/
BOOLEAN
SerialPresent (
IN SERIAL_DEV *SerialDevice
);
/**
Detect whether specific FIFO is full or not.
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
@return whether specific FIFO is full or not
**/
BOOLEAN
SerialFifoFull (
IN SERIAL_DEV_FIFO *Fifo
);
/**
Detect whether specific FIFO is empty or not.
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
@return whether specific FIFO is empty or not
**/
BOOLEAN
SerialFifoEmpty (
IN SERIAL_DEV_FIFO *Fifo
);
/**
Add data to specific FIFO.
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
@param Data the data added to FIFO
@retval EFI_SUCCESS Add data to specific FIFO successfully
@retval EFI_OUT_OF_RESOURCE Failed to add data because FIFO is already full
**/
EFI_STATUS
SerialFifoAdd (
IN SERIAL_DEV_FIFO *Fifo,
IN UINT8 Data
);
/**
Remove data from specific FIFO.
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
@param Data the data removed from FIFO
@retval EFI_SUCCESS Remove data from specific FIFO successfully
@retval EFI_OUT_OF_RESOURCE Failed to remove data because FIFO is empty
**/
EFI_STATUS
SerialFifoRemove (
IN SERIAL_DEV_FIFO *Fifo,
OUT UINT8 *Data
);
/**
Reads and writes all avaliable data.
@param SerialDevice The device to flush
@retval EFI_SUCCESS Data was read/written successfully.
@retval EFI_OUT_OF_RESOURCE Failed because software receive FIFO is full. Note, when
this happens, pending writes are not done.
**/
EFI_STATUS
SerialReceiveTransmit (
IN SERIAL_DEV *SerialDevice
);
/**
Read serial port.
@param SerialDev Pointer to serial device
@param Offset Offset in register group
@return Data read from serial port
**/
UINT8
SerialReadRegister (
IN SERIAL_DEV *SerialDev,
IN UINT32 Offset
);
/**
Write serial port.
@param SerialDev Pointer to serial device
@param Offset Offset in register group
@param Data data which is to be written to some serial port register
**/
VOID
SerialWriteRegister (
IN SERIAL_DEV *SerialDev,
IN UINT32 Offset,
IN UINT8 Data
);
//
// EFI Component Name Functions
//
/**
Retrieves a Unicode string that is the user readable name of the driver.
This function retrieves the user readable name of a driver in the form of a
Unicode string. If the driver specified by This has a user readable name in
the language specified by Language, then a pointer to the driver name is
returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
by This does not support the language specified by Language,
then EFI_UNSUPPORTED is returned.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@param Language[in] A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
languages specified in SupportedLanguages. The
number of languages supported by a driver is up
to the driver writer. Language is specified
in RFC 4646 or ISO 639-2 language code format.
@param DriverName[out] A pointer to the Unicode string to return.
This Unicode string is the name of the
driver specified by This in the language
specified by Language.
@retval EFI_SUCCESS The Unicode string for the Driver specified by
This and the language specified by Language was
returned in DriverName.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER DriverName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
**/
EFI_STATUS
EFIAPI
SerialComponentNameGetDriverName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN CHAR8 *Language,
OUT CHAR16 **DriverName
);
/**
Retrieves a Unicode string that is the user readable name of the controller
that is being managed by a driver.
This function retrieves the user readable name of the controller specified by
ControllerHandle and ChildHandle in the form of a Unicode string. If the
driver specified by This has a user readable name in the language specified by
Language, then a pointer to the controller name is returned in ControllerName,
and EFI_SUCCESS is returned. If the driver specified by This is not currently
managing the controller specified by ControllerHandle and ChildHandle,
then EFI_UNSUPPORTED is returned. If the driver specified by This does not
support the language specified by Language, then EFI_UNSUPPORTED is returned.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@param ControllerHandle[in] The handle of a controller that the driver
specified by This is managing. This handle
specifies the controller whose name is to be
returned.
@param ChildHandle[in] The handle of the child controller to retrieve
the name of. This is an optional parameter that
may be NULL. It will be NULL for device
drivers. It will also be NULL for a bus drivers
that wish to retrieve the name of the bus
controller. It will not be NULL for a bus
driver that wishes to retrieve the name of a
child controller.
@param Language[in] A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
languages specified in SupportedLanguages. The
number of languages supported by a driver is up
to the driver writer. Language is specified in
RFC 4646 or ISO 639-2 language code format.
@param ControllerName[out] A pointer to the Unicode string to return.
This Unicode string is the name of the
controller specified by ControllerHandle and
ChildHandle in the language specified by
Language from the point of view of the driver
specified by This.
@retval EFI_SUCCESS The Unicode string for the user readable name in
the language specified by Language for the
driver specified by This was returned in
DriverName.
@retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
@retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
EFI_HANDLE.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER ControllerName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This is not currently
managing the controller specified by
ControllerHandle and ChildHandle.
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
**/
EFI_STATUS
EFIAPI
SerialComponentNameGetControllerName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN EFI_HANDLE ChildHandle OPTIONAL,
IN CHAR8 *Language,
OUT CHAR16 **ControllerName
);
/**
Add the component name for the serial io device
@param SerialDevice A pointer to the SERIAL_DEV instance.
@param Uid Unique ID for the serial device.
**/
VOID
AddName (
IN SERIAL_DEV *SerialDevice,
IN UINT32 Uid
);
/**
Checks whether the UART parameters are valid and computes the Divisor.
@param ClockRate The clock rate of the serial device used to verify
the BaudRate. Do not verify the BaudRate if it's 0.
@param BaudRate The requested baudrate of the serial device.
@param DataBits Number of databits used in serial device.
@param Parity The type of parity used in serial device.
@param StopBits Number of stopbits used in serial device.
@param Divisor Return the divisor if ClockRate is not 0.
@param ActualBaudRate Return the actual supported baudrate without
exceeding BaudRate. NULL means baudrate degradation
is not allowed.
If the requested BaudRate is not supported, the routine
returns TRUE and the Actual Baud Rate when ActualBaudRate
is not NULL, returns FALSE when ActualBaudRate is NULL.
@retval TRUE The UART parameters are valid.
@retval FALSE The UART parameters are not valid.
**/
BOOLEAN
VerifyUartParameters (
IN UINT32 ClockRate,
IN UINT64 BaudRate,
IN UINT8 DataBits,
IN EFI_PARITY_TYPE Parity,
IN EFI_STOP_BITS_TYPE StopBits,
OUT UINT64 *Divisor,
OUT UINT64 *ActualBaudRate
);
/**
Skip the optional Controller device path node and return the
pointer to the next device path node.
@param DevicePath Pointer to the device path.
@param ContainsControllerNode Returns TRUE if the Controller device path exists.
@param ControllerNumber Returns the Controller Number if Controller device path exists.
@return Pointer to the next device path node.
**/
UART_DEVICE_PATH *
SkipControllerDevicePathNode (
EFI_DEVICE_PATH_PROTOCOL *DevicePath,
BOOLEAN *ContainsControllerNode,
UINT32 *ControllerNumber
);
/**
Check the device path node whether it's the Flow Control node or not.
@param[in] FlowControl The device path node to be checked.
@retval TRUE It's the Flow Control node.
@retval FALSE It's not.
**/
BOOLEAN
IsUartFlowControlDevicePathNode (
IN UART_FLOW_CONTROL_DEVICE_PATH *FlowControl
);
#endif

1320
MdeModulePkg/Bus/Pci/PciSioSerialDxe/SerialIo.c Normal file
View File

File diff suppressed because it is too large Load Diff

38
MdeModulePkg/MdeModulePkg.dec
View File

@ -686,6 +686,12 @@
# @Prompt Enable S3 performance data support.
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
## Indicates if Serial device uses half hand shake.<BR><BR>
# TRUE - Serial device uses half hand shake.<BR>
# FALSE - Serial device doesn't use half hand shake.<BR>
# @Prompt Enable Serial device Half Hand Shake
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
## Indicates if DxeIpl should switch to long mode to enter DXE phase.
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
@ -971,6 +977,38 @@
# @Prompt Pci Serial Device Info
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
# BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that
# describes the parameters of special PCI serial devices.
# Each array entry is 24-byte in length. The array is terminated
# by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
# standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
# The C style structure is defined as below:
# typedef struct {
# UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.
# UINT16 DeviceId; ///< Device ID to match the PCI device
# UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz
# UINT64 Offset; ///< The byte offset into to the BAR
# UINT8 BarIndex; ///< Which BAR to get the UART base address
# UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.
# UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
# UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
# UINT8 Reserved[2];
# } PCI_SERIAL_PARAMETER;
# It contains zero or more instances of the above structure.
# For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
# to contain two instances of the above structure, with the VendorId and DeviceId
# equals to the Device ID and Vendor ID of the device; If the PCI device uses the
# first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
# BarIndex of second one equals to 1; If the PCI device uses the first BAR to
# support both UARTs, BarIndex of both instance equals to 0, Offset of first
# instance equals to 0 and Offset of second one equals to a value bigger than or
# equal to 8.
# For certain UART whose register needs to be accessed in DWORD aligned address,
# RegisterStride equals to 4.
# @Prompt Pci Serial Parameters
gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
# @Prompt Serial Port Extended Transmit FIFO Size in Bytes
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068

1
MdeModulePkg/MdeModulePkg.dsc
View File

@ -208,6 +208,7 @@
MdeModulePkg/Application/HelloWorld/HelloWorld.inf
MdeModulePkg/Application/MemoryProfileInfo/MemoryProfileInfo.inf
MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf
MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportDxe.inf
MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf