diff --git a/IntelFrameworkPkg/Include/Ppi/Security.h b/IntelFrameworkPkg/Include/Ppi/Security.h index 8c7adb6fa0..514c249a2f 100644 --- a/IntelFrameworkPkg/Include/Ppi/Security.h +++ b/IntelFrameworkPkg/Include/Ppi/Security.h @@ -2,7 +2,7 @@ This file declares Security Architectural PPI. This PPI is installed by some platform PEIM that abstracts the security policy to the PEI - Foundation, namely the case of a PEIM¡¯s authentication state being returned during the PEI section + Foundation, namely the case of a PEIM's authentication state being returned during the PEI section extraction process. Copyright (c) 2006, Intel Corporation diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c index 6b46e5c3ce..8d527e061b 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c @@ -732,14 +732,14 @@ UsbEnumerateNewDev ( // // After port is reset, hub establishes a signal path between - // the device and host (DEFALUT state). Device¡¯s registers are + // the device and host (DEFALUT state). Device's registers are // reset, use default address 0 (host enumerates one device at // a time) , and ready to respond to control transfer at EP 0. // // // Host sends a Get_Descriptor request to learn the max packet - // size of default pipe (only part of the device¡¯s descriptor). + // size of default pipe (only part of the device's descriptor). // Status = UsbGetMaxPacketSize0 (Child); @@ -782,7 +782,7 @@ UsbEnumerateNewDev ( DEBUG ((EFI_D_INFO, "UsbEnumerateNewDev: device is now ADDRESSED at %d\n", Address)); // - // Host learns about the device¡¯s abilities by requesting device's + // Host learns about the device's abilities by requesting device's // entire descriptions. // Status = UsbBuildDescTable (Child); diff --git a/MdeModulePkg/Universal/HiiDatabaseDxe/Font.c b/MdeModulePkg/Universal/HiiDatabaseDxe/Font.c index 2df03fc8d9..eb8e651360 100644 --- a/MdeModulePkg/Universal/HiiDatabaseDxe/Font.c +++ b/MdeModulePkg/Universal/HiiDatabaseDxe/Font.c @@ -1370,7 +1370,7 @@ IsLineBreak ( EFI_HII_OUT_FLAG_CLIP is implied. If this points to a NULL on entry, then a buffer will be allocated to hold the generated image and - the pointer updated on exit. It is the caller¡¯s + the pointer updated on exit. It is the caller's responsibility to free this buffer. @param BltX,BLTY Specifies the offset from the left and top edge of the image of the first character cell in the @@ -1381,7 +1381,7 @@ IsLineBreak ( updated to contain the number of elements. This array describes the characters which were at least partially drawn and the heights of the - rows. It is the caller¡¯s responsibility to free + rows. It is the caller's responsibility to free this buffer. @param RowInfoArraySize If this is non-NULL on entry, then on exit it contains the number of elements in RowInfoArray. @@ -1923,7 +1923,7 @@ Exit: @param Flags Describes how the string is to be drawn. @param PackageList The package list in the HII database to search for the specified string. - @param StringId The string¡¯s id, which is unique within + @param StringId The string's id, which is unique within PackageList. @param Language Points to the language for the retrieved string. If NULL, then the current system language is @@ -1939,7 +1939,7 @@ Exit: EFI_HII_OUT_FLAG_CLIP is implied. If this points to a NULL on entry, then a buffer will be allocated to hold the generated image and - the pointer updated on exit. It is the caller¡¯s + the pointer updated on exit. It is the caller's responsibility to free this buffer. @param BltX,BLTY Specifies the offset from the left and top edge of the image of the first character cell in the @@ -1950,7 +1950,7 @@ Exit: updated to contain the number of elements. This array describes the characters which were at least partially drawn and the heights of the - rows. It is the caller¡¯s responsibility to free + rows. It is the caller's responsibility to free this buffer. @param RowInfoArraySize If this is non-NULL on entry, then on exit it contains the number of elements in RowInfoArray. @@ -2071,7 +2071,7 @@ HiiStringIdToImage ( system font and color. @param Blt Thus must point to a NULL on entry. A buffer will be allocated to hold the output and the pointer - updated on exit. It is the caller¡¯s + updated on exit. It is the caller's responsibility to free this buffer. @param Baseline Number of pixels from the bottom of the bitmap to the baseline. @@ -2232,7 +2232,7 @@ Exit: are no more matching fonts. @param StringInfoIn Upon entry, points to the font to return information about. - @param StringInfoOut Upon return, contains the matching font¡¯s + @param StringInfoOut Upon return, contains the matching font's information. If NULL, then no information is returned. It's caller's responsibility to free this buffer. diff --git a/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabase.h b/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabase.h index 7a311f28d1..f19813298e 100644 --- a/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabase.h +++ b/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabase.h @@ -1,1694 +1,1694 @@ -/** @file - -Copyright (c) 2007, Intel Corporation -All rights reserved. This program and the accompanying materials -are licensed and made available under the terms and conditions of the BSD License -which accompanies this distribution. The full text of the license may be found at -http://opensource.org/licenses/bsd-license.php - -THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -Module Name: - - HiiDatabase.h - -Abstract: - - Private structures definitions in HiiDatabase. - -Revision History - - -**/ - -#ifndef __HII_DATABASE_PRIVATE_H__ -#define __HII_DATABASE_PRIVATE_H__ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - - -#include -#include -#include -#include -#include -#include -#include - -#define HII_DATABASE_NOTIFY_GUID \ - { \ - 0xc1c76, 0xd79e, 0x42fe, {0x86, 0xb, 0x8b, 0xe8, 0x7b, 0x3e, 0x7a, 0x78} \ - } - -#define MAX_STRING_LENGTH 1024 -#define MAX_FONT_NAME_LEN 256 -#define NARROW_BASELINE 15 -#define WIDE_BASELINE 14 -#define SYS_FONT_INFO_MASK 0x37 -#define REPLACE_UNKNOWN_GLYPH 0xFFFD -#define PROPORTIONAL_GLYPH 0x80 -#define NARROW_GLYPH 0x40 - -#define BITMAP_LEN_1_BIT(Width, Height) (((Width) + 7) / 8 * (Height)) -#define BITMAP_LEN_4_BIT(Width, Height) (((Width) + 1) / 2 * (Height)) -#define BITMAP_LEN_8_BIT(Width, Height) ((Width) * (Height)) -#define BITMAP_LEN_24_BIT(Width, Height) ((Width) * (Height) * 3) - -// -// Storage types -// -#define EFI_HII_VARSTORE_BUFFER 0 -#define EFI_HII_VARSTORE_NAME_VALUE 1 -#define EFI_HII_VARSTORE_EFI_VARIABLE 2 - -#define HII_FORMSET_STORAGE_SIGNATURE EFI_SIGNATURE_32 ('H', 'S', 'T', 'G') -typedef struct { - UINTN Signature; - LIST_ENTRY Entry; - - EFI_HII_HANDLE HiiHandle; - EFI_HANDLE DriverHandle; - - UINT8 Type; // EFI_HII_VARSTORE_BUFFER, EFI_HII_VARSTORE_NAME_VALUE, EFI_HII_VARSTORE_EFI_VARIABLE - EFI_GUID Guid; - CHAR16 *Name; - UINT16 Size; -} HII_FORMSET_STORAGE; - -#define HII_FORMSET_STORAGE_FROM_LINK(a) CR (a, HII_FORMSET_STORAGE, Link, HII_FORMSET_STORAGE_SIGNATURE) - - -// -// String Package definitions -// -#define HII_STRING_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','i','s','p') -typedef struct _HII_STRING_PACKAGE_INSTANCE { - UINTN Signature; - EFI_HII_STRING_PACKAGE_HDR *StringPkgHdr; - UINT8 *StringBlock; - LIST_ENTRY StringEntry; - LIST_ENTRY FontInfoList; // local font info list - UINT8 FontId; -} HII_STRING_PACKAGE_INSTANCE; - -// -// Form Package definitions -// -#define HII_IFR_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','f','r','p') -typedef struct _HII_IFR_PACKAGE_INSTANCE { - UINTN Signature; - EFI_HII_PACKAGE_HEADER FormPkgHdr; - UINT8 *IfrData; - LIST_ENTRY IfrEntry; -} HII_IFR_PACKAGE_INSTANCE; - -// -// Simple Font Package definitions -// -#define HII_S_FONT_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','s','f','p') -typedef struct _HII_SIMPLE_FONT_PACKAGE_INSTANCE { - UINTN Signature; - EFI_HII_SIMPLE_FONT_PACKAGE_HDR *SimpleFontPkgHdr; - LIST_ENTRY SimpleFontEntry; -} HII_SIMPLE_FONT_PACKAGE_INSTANCE; - -// -// Font Package definitions -// -#define HII_FONT_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','i','f','p') -typedef struct _HII_FONT_PACKAGE_INSTANCE { - UINTN Signature; - EFI_HII_FONT_PACKAGE_HDR *FontPkgHdr; - UINT8 *GlyphBlock; - LIST_ENTRY FontEntry; - LIST_ENTRY GlyphInfoList; -} HII_FONT_PACKAGE_INSTANCE; - -#define HII_GLYPH_INFO_SIGNATURE EFI_SIGNATURE_32 ('h','g','i','s') -typedef struct _HII_GLYPH_INFO { - UINTN Signature; - LIST_ENTRY Entry; - CHAR16 CharId; - EFI_HII_GLYPH_INFO Cell; -} HII_GLYPH_INFO; - -#define HII_FONT_INFO_SIGNATURE EFI_SIGNATURE_32 ('h','l','f','i') -typedef struct _HII_FONT_INFO { - UINTN Signature; - LIST_ENTRY Entry; - LIST_ENTRY *GlobalEntry; - UINT8 FontId; -} HII_FONT_INFO; - -#define HII_GLOBAL_FONT_INFO_SIGNATURE EFI_SIGNATURE_32 ('h','g','f','i') -typedef struct _HII_GLOBAL_FONT_INFO { - UINTN Signature; - LIST_ENTRY Entry; - HII_FONT_PACKAGE_INSTANCE *FontPackage; - UINTN FontInfoSize; - EFI_FONT_INFO *FontInfo; -} HII_GLOBAL_FONT_INFO; - -// -// Image Package definitions -// - -#define HII_PIXEL_MASK 0x80 - -typedef struct _HII_IMAGE_PACKAGE_INSTANCE { - EFI_HII_IMAGE_PACKAGE_HDR ImagePkgHdr; - UINT32 ImageBlockSize; - UINT32 PaletteInfoSize; - UINT8 *ImageBlock; - UINT8 *PaletteBlock; -} HII_IMAGE_PACKAGE_INSTANCE; - -// -// Keyboard Layout Pacakge definitions -// -#define HII_KB_LAYOUT_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','k','l','p') -typedef struct _HII_KEYBOARD_LAYOUT_PACKAGE_INSTANCE { - UINTN Signature; - UINT8 *KeyboardPkg; - LIST_ENTRY KeyboardEntry; -} HII_KEYBOARD_LAYOUT_PACKAGE_INSTANCE; - -// -// Guid Package definitions -// -#define HII_GUID_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','i','g','p') -typedef struct _HII_GUID_PACKAGE_INSTANCE { - UINTN Signature; - UINT8 *GuidPkg; - LIST_ENTRY GuidEntry; -} HII_GUID_PACKAGE_INSTANCE; - -// -// A package list can contain only one or less than one device path package. -// This rule also applies to image package since ImageId can not be duplicate. -// -typedef struct _HII_DATABASE_PACKAGE_LIST_INSTANCE { - EFI_HII_PACKAGE_LIST_HEADER PackageListHdr; - LIST_ENTRY GuidPkgHdr; - LIST_ENTRY FormPkgHdr; - LIST_ENTRY KeyboardLayoutHdr; - LIST_ENTRY StringPkgHdr; - LIST_ENTRY FontPkgHdr; - HII_IMAGE_PACKAGE_INSTANCE *ImagePkg; - LIST_ENTRY SimpleFontPkgHdr; - UINT8 *DevicePathPkg; -} HII_DATABASE_PACKAGE_LIST_INSTANCE; - -#define HII_HANDLE_SIGNATURE EFI_SIGNATURE_32 ('h','i','h','l') - -typedef struct { - UINTN Signature; - LIST_ENTRY Handle; - UINTN Key; -} HII_HANDLE; - -#define HII_DATABASE_RECORD_SIGNATURE EFI_SIGNATURE_32 ('h','i','d','r') - -typedef struct _HII_DATABASE_RECORD { - UINTN Signature; - HII_DATABASE_PACKAGE_LIST_INSTANCE *PackageList; - EFI_HANDLE DriverHandle; - EFI_HII_HANDLE Handle; - LIST_ENTRY DatabaseEntry; -} HII_DATABASE_RECORD; - -#define HII_DATABASE_NOTIFY_SIGNATURE EFI_SIGNATURE_32 ('h','i','d','n') - -typedef struct _HII_DATABASE_NOTIFY { - UINTN Signature; - EFI_HANDLE NotifyHandle; - UINT8 PackageType; - EFI_GUID *PackageGuid; - EFI_HII_DATABASE_NOTIFY PackageNotifyFn; - EFI_HII_DATABASE_NOTIFY_TYPE NotifyType; - LIST_ENTRY DatabaseNotifyEntry; -} HII_DATABASE_NOTIFY; - -#define HII_DATABASE_PRIVATE_DATA_SIGNATURE EFI_SIGNATURE_32 ('H', 'i', 'D', 'p') - -typedef struct _HII_DATABASE_PRIVATE_DATA { - UINTN Signature; - LIST_ENTRY DatabaseList; - LIST_ENTRY DatabaseNotifyList; - EFI_HII_FONT_PROTOCOL HiiFont; -#ifndef DISABLE_UNUSED_HII_PROTOCOLS - EFI_HII_IMAGE_PROTOCOL HiiImage; -#endif - EFI_HII_STRING_PROTOCOL HiiString; - EFI_HII_DATABASE_PROTOCOL HiiDatabase; - EFI_HII_CONFIG_ROUTING_PROTOCOL ConfigRouting; - LIST_ENTRY HiiHandleList; - INTN HiiHandleCount; - LIST_ENTRY FontInfoList; // global font info list - UINTN Attribute; // default system color - EFI_GUID CurrentLayoutGuid; - EFI_HII_KEYBOARD_LAYOUT *CurrentLayout; -} HII_DATABASE_PRIVATE_DATA; - -#define HII_FONT_DATABASE_PRIVATE_DATA_FROM_THIS(a) \ - CR (a, \ - HII_DATABASE_PRIVATE_DATA, \ - HiiFont, \ - HII_DATABASE_PRIVATE_DATA_SIGNATURE \ - ) - -#define HII_IMAGE_DATABASE_PRIVATE_DATA_FROM_THIS(a) \ - CR (a, \ - HII_DATABASE_PRIVATE_DATA, \ - HiiImage, \ - HII_DATABASE_PRIVATE_DATA_SIGNATURE \ - ) - -#define HII_STRING_DATABASE_PRIVATE_DATA_FROM_THIS(a) \ - CR (a, \ - HII_DATABASE_PRIVATE_DATA, \ - HiiString, \ - HII_DATABASE_PRIVATE_DATA_SIGNATURE \ - ) - -#define HII_DATABASE_DATABASE_PRIVATE_DATA_FROM_THIS(a) \ - CR (a, \ - HII_DATABASE_PRIVATE_DATA, \ - HiiDatabase, \ - HII_DATABASE_PRIVATE_DATA_SIGNATURE \ - ) - -#define CONFIG_ROUTING_DATABASE_PRIVATE_DATA_FROM_THIS(a) \ - CR (a, \ - HII_DATABASE_PRIVATE_DATA, \ - ConfigRouting, \ - HII_DATABASE_PRIVATE_DATA_SIGNATURE \ - ) - -// -// Internal function prototypes. -// - -/** - This function checks whether a handle is a valid EFI_HII_HANDLE - - @param Handle Pointer to a EFI_HII_HANDLE - - @retval TRUE Valid - @retval FALSE Invalid - -**/ -BOOLEAN -IsHiiHandleValid ( - EFI_HII_HANDLE Handle - ) -; - - -/** - This function checks whether EFI_FONT_INFO exists in current database. If - FontInfoMask is specified, check what options can be used to make a match. - Note that the masks relate to where the system default should be supplied - are ignored by this function. - - @param Private Hii database private structure. - @param FontInfo Points to EFI_FONT_INFO structure. - @param FontInfoMask If not NULL, describes what options can be used - to make a match between the font requested and - the font available. The caller must guarantee - this mask is valid. - @param FontHandle On entry, Points to the font handle returned by a - previous call to GetFontInfo() or NULL to start - with the first font. - @param GlobalFontInfo If not NULL, output the corresponding globa font - info. - - @retval TRUE Existed - @retval FALSE Not existed - -**/ -BOOLEAN -IsFontInfoExisted ( - IN HII_DATABASE_PRIVATE_DATA *Private, - IN EFI_FONT_INFO *FontInfo, - IN EFI_FONT_INFO_MASK *FontInfoMask, OPTIONAL - IN EFI_FONT_HANDLE FontHandle, OPTIONAL - OUT HII_GLOBAL_FONT_INFO **GlobalFontInfo OPTIONAL - ) -; - - -/** - Retrieve system default font and color. - - @param Private HII database driver private data. - @param FontInfo Points to system default font output-related - information. It's caller's responsibility to free - this buffer. - @param FontInfoSize If not NULL, output the size of buffer FontInfo. - - @retval EFI_SUCCESS Cell information is added to the GlyphInfoList. - @retval EFI_OUT_OF_RESOURCES The system is out of resources to accomplish the - task. - @retval EFI_INVALID_PARAMETER Any input parameter is invalid. - -**/ -EFI_STATUS -GetSystemFont ( - IN HII_DATABASE_PRIVATE_DATA *Private, - OUT EFI_FONT_DISPLAY_INFO **FontInfo, - OUT UINTN *FontInfoSize OPTIONAL - ) -; - - -/** - Parse all string blocks to find a String block specified by StringId. - If StringId = (EFI_STRING_ID) (-1), find out all EFI_HII_SIBT_FONT blocks - within this string package and backup its information. - If StringId = 0, output the string id of last string block (EFI_HII_SIBT_END). - - @param Private Hii database private structure. - @param StringPackage Hii string package instance. - @param StringId The string¡¯s id, which is unique within - PackageList. - @param BlockType Output the block type of found string block. - @param StringBlockAddr Output the block address of found string block. - @param StringTextOffset Offset, relative to the found block address, of - the string text information. - @param LastStringId Output the last string id when StringId = 0. - - @retval EFI_SUCCESS The string text and font is retrieved - successfully. - @retval EFI_NOT_FOUND The specified text or font info can not be found - out. - @retval EFI_OUT_OF_RESOURCES The system is out of resources to accomplish the - task. - -**/ -EFI_STATUS -FindStringBlock ( - IN HII_DATABASE_PRIVATE_DATA *Private, - IN HII_STRING_PACKAGE_INSTANCE *StringPackage, - IN EFI_STRING_ID StringId, - OUT UINT8 *BlockType, OPTIONAL - OUT UINT8 **StringBlockAddr, OPTIONAL - OUT UINTN *StringTextOffset, OPTIONAL - OUT EFI_STRING_ID *LastStringId OPTIONAL - ) -; - - -/** - Parse all glyph blocks to find a glyph block specified by CharValue. - If CharValue = (CHAR16) (-1), collect all default character cell information - within this font package and backup its information. - - @param FontPackage Hii string package instance. - @param CharValue Unicode character value, which identifies a glyph - block. - @param GlyphBuffer Output the corresponding bitmap data of the found - block. It is the caller's responsiblity to free - this buffer. - @param Cell Output cell information of the encoded bitmap. - @param GlyphBufferLen If not NULL, output the length of GlyphBuffer. - - @retval EFI_SUCCESS The bitmap data is retrieved successfully. - @retval EFI_NOT_FOUND The specified CharValue does not exist in current - database. - @retval EFI_OUT_OF_RESOURCES The system is out of resources to accomplish the - task. - -**/ -EFI_STATUS -FindGlyphBlock ( - IN HII_FONT_PACKAGE_INSTANCE *FontPackage, - IN CHAR16 CharValue, - OUT UINT8 **GlyphBuffer, OPTIONAL - OUT EFI_HII_GLYPH_INFO *Cell, OPTIONAL - OUT UINTN *GlyphBufferLen OPTIONAL - ) -; - -// -// EFI_HII_FONT_PROTOCOL protocol interfaces -// - - -/** - Renders a string to a bitmap or to the display. - - @param This A pointer to the EFI_HII_FONT_PROTOCOL instance. - @param Flags Describes how the string is to be drawn. - @param String Points to the null-terminated string to be - displayed. - @param StringInfo Points to the string output information, - including the color and font. If NULL, then the - string will be output in the default system font - and color. - @param Blt If this points to a non-NULL on entry, this - points to the image, which is Width pixels wide - and Height pixels high. The string will be drawn - onto this image and - EFI_HII_OUT_FLAG_CLIP is implied. If this points - to a NULL on entry, then a buffer - will be allocated to hold the generated image and - the pointer updated on exit. It is the caller¡¯s - responsibility to free this buffer. - @param BltX,BLTY Specifies the offset from the left and top edge - of the image of the first character cell in the - image. - @param RowInfoArray If this is non-NULL on entry, then on exit, this - will point to an allocated buffer containing - row information and RowInfoArraySize will be - updated to contain the number of elements. - This array describes the characters which were at - least partially drawn and the heights of the - rows. It is the caller¡¯s responsibility to free - this buffer. - @param RowInfoArraySize If this is non-NULL on entry, then on exit it - contains the number of elements in RowInfoArray. - @param ColumnInfoArray If this is non-NULL, then on return it will be - filled with the horizontal offset for each - character in the string on the row where it is - displayed. Non-printing characters will have - the offset ~0. The caller is responsible to - allocate a buffer large enough so that there - is one entry for each character in the string, - not including the null-terminator. It is possible - when character display is normalized that some - character cells overlap. - - @retval EFI_SUCCESS The string was successfully rendered. - @retval EFI_OUT_OF_RESOURCES Unable to allocate an output buffer for - RowInfoArray or Blt. - @retval EFI_INVALID_PARAMETER The String was NULL. - -**/ -EFI_STATUS -EFIAPI -HiiStringToImage ( - IN CONST EFI_HII_FONT_PROTOCOL *This, - IN EFI_HII_OUT_FLAGS Flags, - IN CONST EFI_STRING String, - IN CONST EFI_FONT_DISPLAY_INFO *StringInfo OPTIONAL, - IN OUT EFI_IMAGE_OUTPUT **Blt, - IN UINTN BltX, - IN UINTN BltY, - OUT EFI_HII_ROW_INFO **RowInfoArray OPTIONAL, - OUT UINTN *RowInfoArraySize OPTIONAL, - OUT UINTN *ColumnInfoArray OPTIONAL - ) -; - - -/** - Render a string to a bitmap or the screen containing the contents of the specified string. - - @param This A pointer to the EFI_HII_FONT_PROTOCOL instance. - @param Flags Describes how the string is to be drawn. - @param PackageList The package list in the HII database to search - for the specified string. - @param StringId The string¡¯s id, which is unique within - PackageList. - @param Language Points to the language for the retrieved string. - If NULL, then the current system language is - used. - @param StringInfo Points to the string output information, - including the color and font. If NULL, then the - string will be output in the default system font - and color. - @param Blt If this points to a non-NULL on entry, this - points to the image, which is Width pixels wide - and Height pixels high. The string will be drawn - onto this image and - EFI_HII_OUT_FLAG_CLIP is implied. If this points - to a NULL on entry, then a buffer - will be allocated to hold the generated image and - the pointer updated on exit. It is the caller¡¯s - responsibility to free this buffer. - @param BltX,BLTY Specifies the offset from the left and top edge - of the image of the first character cell in the - image. - @param RowInfoArray If this is non-NULL on entry, then on exit, this - will point to an allocated buffer containing - row information and RowInfoArraySize will be - updated to contain the number of elements. - This array describes the characters which were at - least partially drawn and the heights of the - rows. It is the caller¡¯s responsibility to free - this buffer. - @param RowInfoArraySize If this is non-NULL on entry, then on exit it - contains the number of elements in RowInfoArray. - @param ColumnInfoArray If this is non-NULL, then on return it will be - filled with the horizontal offset for each - character in the string on the row where it is - displayed. Non-printing characters will have - the offset ~0. The caller is responsible to - allocate a buffer large enough so that there - is one entry for each character in the string, - not including the null-terminator. It is possible - when character display is normalized that some - character cells overlap. - - @retval EFI_SUCCESS The string was successfully rendered. - @retval EFI_OUT_OF_RESOURCES Unable to allocate an output buffer for - RowInfoArray or Blt. - @retval EFI_INVALID_PARAMETER The String was NULL. - -**/ -EFI_STATUS -EFIAPI -HiiStringIdToImage ( - IN CONST EFI_HII_FONT_PROTOCOL *This, - IN EFI_HII_OUT_FLAGS Flags, - IN EFI_HII_HANDLE PackageList, - IN EFI_STRING_ID StringId, - IN CONST CHAR8* Language, - IN CONST EFI_FONT_DISPLAY_INFO *StringInfo OPTIONAL, - IN OUT EFI_IMAGE_OUTPUT **Blt, - IN UINTN BltX, - IN UINTN BltY, - OUT EFI_HII_ROW_INFO **RowInfoArray OPTIONAL, - OUT UINTN *RowInfoArraySize OPTIONAL, - OUT UINTN *ColumnInfoArray OPTIONAL - ) -; - - -/** - Convert the glyph for a single character into a bitmap. - - @param This A pointer to the EFI_HII_FONT_PROTOCOL instance. - @param Char Character to retrieve. - @param StringInfo Points to the string font and color information - or NULL if the string should use the default - system font and color. - @param Blt Thus must point to a NULL on entry. A buffer will - be allocated to hold the output and the pointer - updated on exit. It is the caller¡¯s - responsibility to free this buffer. - @param Baseline Number of pixels from the bottom of the bitmap to - the baseline. - - @retval EFI_SUCCESS Glyph bitmap created. - @retval EFI_OUT_OF_RESOURCES Unable to allocate the output buffer Blt. - @retval EFI_WARN_UNKNOWN_GLYPH The glyph was unknown and was replaced with the - glyph for Unicode character 0xFFFD. - @retval EFI_INVALID_PARAMETER Blt is NULL or *Blt is not NULL. - -**/ -EFI_STATUS -EFIAPI -HiiGetGlyph ( - IN CONST EFI_HII_FONT_PROTOCOL *This, - IN CHAR16 Char, - IN CONST EFI_FONT_DISPLAY_INFO *StringInfo, - OUT EFI_IMAGE_OUTPUT **Blt, - OUT UINTN *Baseline OPTIONAL - ) -; - - -/** - This function iterates through fonts which match the specified font, using - the specified criteria. If String is non-NULL, then all of the characters in - the string must exist in order for a candidate font to be returned. - - @param This A pointer to the EFI_HII_FONT_PROTOCOL instance. - @param FontHandle On entry, points to the font handle returned by a - previous call to GetFontInfo() or NULL to start - with the first font. On return, points to the - returned font handle or points to NULL if there - are no more matching fonts. - @param StringInfoIn Upon entry, points to the font to return - information about. - @param StringInfoOut Upon return, contains the matching font¡¯s - information. If NULL, then no information is - returned. It's caller's responsibility to free - this buffer. - @param String Points to the string which will be tested to - determine if all characters are available. If - NULL, then any font is acceptable. - - @retval EFI_SUCCESS Matching font returned successfully. - @retval EFI_NOT_FOUND No matching font was found. - @retval EFI_INVALID_PARAMETER StringInfoIn is NULL. - @retval EFI_OUT_OF_RESOURCES There were insufficient resources to complete the - request. - -**/ -EFI_STATUS -EFIAPI -HiiGetFontInfo ( - IN CONST EFI_HII_FONT_PROTOCOL *This, - IN OUT EFI_FONT_HANDLE *FontHandle, - IN CONST EFI_FONT_DISPLAY_INFO *StringInfoIn, - OUT EFI_FONT_DISPLAY_INFO **StringInfoOut, - IN CONST EFI_STRING String OPTIONAL - ) -; - -// -// EFI_HII_IMAGE_PROTOCOL interfaces -// - - -/** - This function adds the image Image to the group of images owned by PackageList, and returns - a new image identifier (ImageId). - - @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. - @param PackageList Handle of the package list where this image will - be added. - @param ImageId On return, contains the new image id, which is - unique within PackageList. - @param Image Points to the image. - - @retval EFI_SUCCESS The new image was added successfully. - @retval EFI_NOT_FOUND The specified PackageList could not be found in - database. - @retval EFI_OUT_OF_RESOURCES Could not add the image due to lack of resources. - @retval EFI_INVALID_PARAMETER Image is NULL or ImageId is NULL. - -**/ -EFI_STATUS -EFIAPI -HiiNewImage ( - IN CONST EFI_HII_IMAGE_PROTOCOL *This, - IN EFI_HII_HANDLE PackageList, - OUT EFI_IMAGE_ID *ImageId, - IN CONST EFI_IMAGE_INPUT *Image - ) -; - - -/** - This function retrieves the image specified by ImageId which is associated with - the specified PackageList and copies it into the buffer specified by Image. - - @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. - @param PackageList Handle of the package list where this image will - be searched. - @param ImageId The image¡¯s id,, which is unique within - PackageList. - @param Image Points to the image. - @param ImageSize On entry, points to the size of the buffer - pointed to by Image, in bytes. On return, points - to the length of the image, in bytes. - - @retval EFI_SUCCESS The new image was returned successfully. - @retval EFI_NOT_FOUND The image specified by ImageId is not available. - @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to - hold the image. - @retval EFI_INVALID_PARAMETER The Image or ImageSize was NULL. - -**/ -EFI_STATUS -EFIAPI -HiiGetImage ( - IN CONST EFI_HII_IMAGE_PROTOCOL *This, - IN EFI_HII_HANDLE PackageList, - IN EFI_IMAGE_ID ImageId, - OUT EFI_IMAGE_INPUT *Image, - OUT UINTN *ImageSize - ) -; - - -/** - This function updates the image specified by ImageId in the specified PackageListHandle to - the image specified by Image. - - @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. - @param PackageList The package list containing the images. - @param ImageId The image¡¯s id,, which is unique within - PackageList. - @param Image Points to the image. - - @retval EFI_SUCCESS The new image was updated successfully. - @retval EFI_NOT_FOUND The image specified by ImageId is not in the - database. - @retval EFI_INVALID_PARAMETER The Image was NULL. - -**/ -EFI_STATUS -EFIAPI -HiiSetImage ( - IN CONST EFI_HII_IMAGE_PROTOCOL *This, - IN EFI_HII_HANDLE PackageList, - IN EFI_IMAGE_ID ImageId, - IN CONST EFI_IMAGE_INPUT *Image - ) -; - - -/** - This function renders an image to a bitmap or the screen using the specified - color and options. It draws the image on an existing bitmap, allocates a new - bitmap or uses the screen. The images can be clipped. - - @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. - @param Flags Describes how the image is to be drawn. - @param Image Points to the image to be displayed. - @param Blt If this points to a non-NULL on entry, this - points to the image, which is Width pixels wide - and Height pixels high. The image will be drawn - onto this image and EFI_HII_DRAW_FLAG_CLIP is - implied. If this points to a NULL on entry, then - a buffer will be allocated to hold the generated - image and the pointer updated on exit. It is the - caller¡¯s responsibility to free this buffer. - @param BltY Specifies the offset from the left and top edge - of the output image of the first pixel in the - image. - - @retval EFI_SUCCESS The image was successfully drawn. - @retval EFI_OUT_OF_RESOURCES Unable to allocate an output buffer for Blt. - @retval EFI_INVALID_PARAMETER The Image or Blt was NULL. - @retval EFI_INVALID_PARAMETER Any combination of Flags is invalid. - -**/ -EFI_STATUS -EFIAPI -HiiDrawImage ( - IN CONST EFI_HII_IMAGE_PROTOCOL *This, - IN EFI_HII_DRAW_FLAGS Flags, - IN CONST EFI_IMAGE_INPUT *Image, - IN OUT EFI_IMAGE_OUTPUT **Blt, - IN UINTN BltX, - IN UINTN BltY - ) -; - - -/** - This function renders an image to a bitmap or the screen using the specified - color and options. It draws the image on an existing bitmap, allocates a new - bitmap or uses the screen. The images can be clipped. - - @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. - @param Flags Describes how the image is to be drawn. - @param PackageList The package list in the HII database to search - for the specified image. - @param ImageId The image's id, which is unique within - PackageList. - @param Blt If this points to a non-NULL on entry, this - points to the image, which is Width pixels wide - and Height pixels high. The image will be drawn - onto this image and - EFI_HII_DRAW_FLAG_CLIP is implied. If this points - to a NULL on entry, then a buffer will be - allocated to hold the generated image and the - pointer updated on exit. It is the caller¡¯s - responsibility to free this buffer. - @param BltY Specifies the offset from the left and top edge - of the output image of the first pixel in the - image. - - @retval EFI_SUCCESS The image was successfully drawn. - @retval EFI_OUT_OF_RESOURCES Unable to allocate an output buffer for Blt. - @retval EFI_INVALID_PARAMETER The Image was NULL. - @retval EFI_NOT_FOUND The specified packagelist could not be found in - current database. - -**/ -EFI_STATUS -EFIAPI -HiiDrawImageId ( - IN CONST EFI_HII_IMAGE_PROTOCOL *This, - IN EFI_HII_DRAW_FLAGS Flags, - IN EFI_HII_HANDLE PackageList, - IN EFI_IMAGE_ID ImageId, - IN OUT EFI_IMAGE_OUTPUT **Blt, - IN UINTN BltX, - IN UINTN BltY - ) - -; - -// -// EFI_HII_STRING_PROTOCOL -// - - -/** - This function adds the string String to the group of strings owned by PackageList, with the - specified font information StringFontInfo and returns a new string id. - - @param This A pointer to the EFI_HII_STRING_PROTOCOL - instance. - @param PackageList Handle of the package list where this string will - be added. - @param StringId On return, contains the new strings id, which is - unique within PackageList. - @param Language Points to the language for the new string. - @param LanguageName Points to the printable language name to - associate with the passed in Language field.If - LanguageName is not NULL and the string package - header's LanguageName associated with a given - Language is not zero, the LanguageName being - passed in will be ignored. - @param String Points to the new null-terminated string. - @param StringFontInfo Points to the new string¡¯s font information or - NULL if the string should have the default system - font, size and style. - - @retval EFI_SUCCESS The new string was added successfully. - @retval EFI_NOT_FOUND The specified PackageList could not be found in - database. - @retval EFI_OUT_OF_RESOURCES Could not add the string due to lack of - resources. - @retval EFI_INVALID_PARAMETER String is NULL or StringId is NULL or Language is - NULL. - -**/ -EFI_STATUS -EFIAPI -HiiNewString ( - IN CONST EFI_HII_STRING_PROTOCOL *This, - IN EFI_HII_HANDLE PackageList, - OUT EFI_STRING_ID *StringId, - IN CONST CHAR8 *Language, - IN CONST CHAR16 *LanguageName, OPTIONAL - IN CONST EFI_STRING String, - IN CONST EFI_FONT_INFO *StringFontInfo OPTIONAL - ) -; - - -/** - This function retrieves the string specified by StringId which is associated - with the specified PackageList in the language Language and copies it into - the buffer specified by String. - - @param This A pointer to the EFI_HII_STRING_PROTOCOL - instance. - @param Language Points to the language for the retrieved string. - @param PackageList The package list in the HII database to search - for the specified string. - @param StringId The string's id, which is unique within - PackageList. - @param String Points to the new null-terminated string. - @param StringSize On entry, points to the size of the buffer - pointed to by String, in bytes. On return, - points to the length of the string, in bytes. - @param StringFontInfo If not NULL, points to the string¡¯s font - information. It's caller's responsibility to - free this buffer. - - @retval EFI_SUCCESS The string was returned successfully. - @retval EFI_NOT_FOUND The string specified by StringId is not - available. - @retval EFI_NOT_FOUND The string specified by StringId is available but - not in the specified language. - @retval EFI_BUFFER_TOO_SMALL The buffer specified by StringSize is too small - to hold the string. - @retval EFI_INVALID_PARAMETER The String or Language or StringSize was NULL. - @retval EFI_OUT_OF_RESOURCES There were insufficient resources to complete the - request. - -**/ -EFI_STATUS -EFIAPI -HiiGetString ( - IN CONST EFI_HII_STRING_PROTOCOL *This, - IN CONST CHAR8 *Language, - IN EFI_HII_HANDLE PackageList, - IN EFI_STRING_ID StringId, - OUT EFI_STRING String, - IN OUT UINTN *StringSize, - OUT EFI_FONT_INFO **StringFontInfo OPTIONAL - ) -; - - -/** - This function updates the string specified by StringId in the specified PackageList to the text - specified by String and, optionally, the font information specified by StringFontInfo. - - @param This A pointer to the EFI_HII_STRING_PROTOCOL - instance. - @param PackageList The package list containing the strings. - @param StringId The string¡¯s id, which is unique within - PackageList. - @param Language Points to the language for the updated string. - @param String Points to the new null-terminated string. - @param StringFontInfo Points to the string¡¯s font information or NULL - if the string font information is not changed. - - @retval EFI_SUCCESS The string was updated successfully. - @retval EFI_NOT_FOUND The string specified by StringId is not in the - database. - @retval EFI_INVALID_PARAMETER The String or Language was NULL. - @retval EFI_OUT_OF_RESOURCES The system is out of resources to accomplish the - task. - -**/ -EFI_STATUS -EFIAPI -HiiSetString ( - IN CONST EFI_HII_STRING_PROTOCOL *This, - IN EFI_HII_HANDLE PackageList, - IN EFI_STRING_ID StringId, - IN CONST CHAR8 *Language, - IN CONST EFI_STRING String, - IN CONST EFI_FONT_INFO *StringFontInfo OPTIONAL - ) -; - - -/** - This function returns the list of supported languages, in the format specified - in Appendix M of UEFI 2.1 spec. - - @param This A pointer to the EFI_HII_STRING_PROTOCOL - instance. - @param PackageList The package list to examine. - @param Languages Points to the buffer to hold the returned string. - @param LanguagesSize On entry, points to the size of the buffer - pointed to by Languages, in bytes. On return, - points to the length of Languages, in bytes. - - @retval EFI_SUCCESS The languages were returned successfully. - @retval EFI_INVALID_PARAMETER The Languages or LanguagesSize was NULL. - @retval EFI_BUFFER_TOO_SMALL The LanguagesSize is too small to hold the list - of supported languages. LanguageSize is updated - to contain the required size. - @retval EFI_NOT_FOUND Could not find string package in specified - packagelist. - -**/ -EFI_STATUS -EFIAPI -HiiGetLanguages ( - IN CONST EFI_HII_STRING_PROTOCOL *This, - IN EFI_HII_HANDLE PackageList, - IN OUT CHAR8 *Languages, - IN OUT UINTN *LanguagesSize - ) -; - - -/** - Each string package has associated with it a single primary language and zero - or more secondary languages. This routine returns the secondary languages - associated with a package list. - - @param This A pointer to the EFI_HII_STRING_PROTOCOL - instance. - @param PackageList The package list to examine. - @param FirstLanguage Points to the primary language. - @param SecondaryLanguages Points to the buffer to hold the returned list of - secondary languages for the specified - FirstLanguage. If there are no secondary - languages, the function returns successfully, - but this is set to NULL. - @param SecondaryLanguageSize On entry, points to the size of the buffer - pointed to by SecondLanguages, in bytes. On - return, points to the length of SecondLanguages - in bytes. - - @retval EFI_SUCCESS Secondary languages were correctly returned. - @retval EFI_INVALID_PARAMETER FirstLanguage or SecondLanguages or - SecondLanguagesSize was NULL. - @retval EFI_BUFFER_TOO_SMALL The buffer specified by SecondLanguagesSize is - too small to hold the returned information. - SecondLanguageSize is updated to hold the size of - the buffer required. - @retval EFI_NOT_FOUND The language specified by FirstLanguage is not - present in the specified package list. - -**/ -EFI_STATUS -EFIAPI -HiiGetSecondaryLanguages ( - IN CONST EFI_HII_STRING_PROTOCOL *This, - IN EFI_HII_HANDLE PackageList, - IN CONST CHAR8 *FirstLanguage, - IN OUT CHAR8 *SecondLanguages, - IN OUT UINTN *SecondLanguagesSize - ) -; - -// -// EFI_HII_DATABASE_PROTOCOL protocol interfaces -// - - -/** - This function adds the packages in the package list to the database and returns a handle. If there is a - EFI_DEVICE_PATH_PROTOCOL associated with the DriverHandle, then this function will - create a package of type EFI_PACKAGE_TYPE_DEVICE_PATH and add it to the package list. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param PackageList A pointer to an EFI_HII_PACKAGE_LIST_HEADER - structure. - @param DriverHandle Associate the package list with this EFI handle. - @param Handle A pointer to the EFI_HII_HANDLE instance. - - @retval EFI_SUCCESS The package list associated with the Handle was - added to the HII database. - @retval EFI_OUT_OF_RESOURCES Unable to allocate necessary resources for the - new database contents. - @retval EFI_INVALID_PARAMETER PackageList is NULL or Handle is NULL. - -**/ -EFI_STATUS -EFIAPI -HiiNewPackageList ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN CONST EFI_HII_PACKAGE_LIST_HEADER *PackageList, - IN CONST EFI_HANDLE DriverHandle, - OUT EFI_HII_HANDLE *Handle - ) -; - - -/** - This function removes the package list that is associated with a handle Handle - from the HII database. Before removing the package, any registered functions - with the notification type REMOVE_PACK and the same package type will be called. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param Handle The handle that was registered to the data that - is requested for removal. - - @retval EFI_SUCCESS The data associated with the Handle was removed - from the HII database. - @retval EFI_NOT_FOUND The specified PackageList could not be found in - database. - @retval EFI_INVALID_PARAMETER The Handle was not valid. - -**/ -EFI_STATUS -EFIAPI -HiiRemovePackageList ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN EFI_HII_HANDLE Handle - ) -; - - -/** - This function updates the existing package list (which has the specified Handle) - in the HII databases, using the new package list specified by PackageList. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param Handle The handle that was registered to the data that - is requested to be updated. - @param PackageList A pointer to an EFI_HII_PACKAGE_LIST_HEADER - package. - - @retval EFI_SUCCESS The HII database was successfully updated. - @retval EFI_OUT_OF_RESOURCES Unable to allocate enough memory for the updated - database. - @retval EFI_INVALID_PARAMETER Handle or PackageList was NULL. - @retval EFI_NOT_FOUND The Handle was not valid or could not be found in - database. - -**/ -EFI_STATUS -EFIAPI -HiiUpdatePackageList ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN EFI_HII_HANDLE Handle, - IN CONST EFI_HII_PACKAGE_LIST_HEADER *PackageList - ) -; - - -/** - This function returns a list of the package handles of the specified type - that are currently active in the database. The pseudo-type - EFI_HII_PACKAGE_TYPE_ALL will cause all package handles to be listed. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param PackageType Specifies the package type of the packages to - list or EFI_HII_PACKAGE_TYPE_ALL for all packages - to be listed. - @param PackageGuid If PackageType is EFI_HII_PACKAGE_TYPE_GUID, then - this is the pointer to the GUID which must match - the Guid field of EFI_HII_GUID_PACKAGE_GUID_HDR. - Otherwise, it must be NULL. - @param HandleBufferLength On input, a pointer to the length of the handle - buffer. On output, the length of the handle - buffer that is required for the handles found. - @param Handle An array of EFI_HII_HANDLE instances returned. - - @retval EFI_SUCCESS The matching handles are outputed successfully. - @retval EFI_BUFFER_TO_SMALL The HandleBufferLength parameter indicates that - Handle is too small to support the number of - handles. HandleBufferLength is updated with a - value that will enable the data to fit. - @retval EFI_NOT_FOUND No matching handle could not be found in - database. - @retval EFI_INVALID_PARAMETER Handle or HandleBufferLength was NULL. - -**/ -EFI_STATUS -EFIAPI -HiiListPackageLists ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN UINT8 PackageType, - IN CONST EFI_GUID *PackageGuid, - IN OUT UINTN *HandleBufferLength, - OUT EFI_HII_HANDLE *Handle - ) -; - - -/** - This function will export one or all package lists in the database to a buffer. - For each package list exported, this function will call functions registered - with EXPORT_PACK and then copy the package list to the buffer. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param Handle An EFI_HII_HANDLE that corresponds to the desired - package list in the HII database to export or - NULL to indicate all package lists should be - exported. - @param BufferSize On input, a pointer to the length of the buffer. - On output, the length of the buffer that is - required for the exported data. - @param Buffer A pointer to a buffer that will contain the - results of the export function. - - @retval EFI_SUCCESS Package exported. - @retval EFI_BUFFER_TO_SMALL The HandleBufferLength parameter indicates that - Handle is too small to support the number of - handles. HandleBufferLength is updated with - a value that will enable the data to fit. - @retval EFI_NOT_FOUND The specifiecd Handle could not be found in the - current database. - @retval EFI_INVALID_PARAMETER Handle or Buffer or BufferSize was NULL. - -**/ -EFI_STATUS -EFIAPI -HiiExportPackageLists ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN EFI_HII_HANDLE Handle, - IN OUT UINTN *BufferSize, - OUT EFI_HII_PACKAGE_LIST_HEADER *Buffer - ) -; - - -/** - This function registers a function which will be called when specified actions related to packages of - the specified type occur in the HII database. By registering a function, other HII-related drivers are - notified when specific package types are added, removed or updated in the HII database. - Each driver or application which registers a notification should use - EFI_HII_DATABASE_PROTOCOL.UnregisterPackageNotify() before exiting. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param PackageType Specifies the package type of the packages to - list or EFI_HII_PACKAGE_TYPE_ALL for all packages - to be listed. - @param PackageGuid If PackageType is EFI_HII_PACKAGE_TYPE_GUID, then - this is the pointer to the GUID which must match - the Guid field of - EFI_HII_GUID_PACKAGE_GUID_HDR. Otherwise, it must - be NULL. - @param PackageNotifyFn Points to the function to be called when the - event specified by - NotificationType occurs. - @param NotifyType Describes the types of notification which this - function will be receiving. - @param NotifyHandle Points to the unique handle assigned to the - registered notification. Can be used in - EFI_HII_DATABASE_PROTOCOL.UnregisterPackageNotify() - to stop notifications. - - @retval EFI_SUCCESS Notification registered successfully. - @retval EFI_OUT_OF_RESOURCES Unable to allocate necessary data structures - @retval EFI_INVALID_PARAMETER NotifyHandle is NULL. - @retval EFI_INVALID_PARAMETER PackageGuid is not NULL when PackageType is not - EFI_HII_PACKAGE_TYPE_GUID. - @retval EFI_INVALID_PARAMETER PackageGuid is NULL when PackageType is - EFI_HII_PACKAGE_TYPE_GUID. - -**/ -EFI_STATUS -EFIAPI -HiiRegisterPackageNotify ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN UINT8 PackageType, - IN CONST EFI_GUID *PackageGuid, - IN CONST EFI_HII_DATABASE_NOTIFY PackageNotifyFn, - IN EFI_HII_DATABASE_NOTIFY_TYPE NotifyType, - OUT EFI_HANDLE *NotifyHandle - ) -; - - -/** - Removes the specified HII database package-related notification. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param NotifyHandle The handle of the notification function being - unregistered. - - @retval EFI_SUCCESS Notification is unregistered successfully. - @retval EFI_INVALID_PARAMETER The Handle is invalid. - -**/ -EFI_STATUS -EFIAPI -HiiUnregisterPackageNotify ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN EFI_HANDLE NotificationHandle - ) -; - - -/** - This routine retrieves an array of GUID values for each keyboard layout that - was previously registered in the system. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param KeyGuidBufferLength On input, a pointer to the length of the keyboard - GUID buffer. On output, the length of the handle - buffer that is required for the handles found. - @param KeyGuidBuffer An array of keyboard layout GUID instances - returned. - - @retval EFI_SUCCESS KeyGuidBuffer was updated successfully. - @retval EFI_BUFFER_TOO_SMALL The KeyGuidBufferLength parameter indicates - that KeyGuidBuffer is too small to support the - number of GUIDs. KeyGuidBufferLength is - updated with a value that will enable the data to - fit. - @retval EFI_INVALID_PARAMETER The KeyGuidBuffer or KeyGuidBufferLength was - NULL. - @retval EFI_NOT_FOUND There was no keyboard layout. - -**/ -EFI_STATUS -EFIAPI -HiiFindKeyboardLayouts ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN OUT UINT16 *KeyGuidBufferLength, - OUT EFI_GUID *KeyGuidBuffer - ) -; - - -/** - This routine retrieves the requested keyboard layout. The layout is a physical description of the keys - on a keyboard and the character(s) that are associated with a particular set of key strokes. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param KeyGuid A pointer to the unique ID associated with a - given keyboard layout. If KeyGuid is NULL then - the current layout will be retrieved. - @param KeyboardLayoutLength On input, a pointer to the length of the - KeyboardLayout buffer. On output, the length of - the data placed into KeyboardLayout. - @param KeyboardLayout A pointer to a buffer containing the retrieved - keyboard layout. - - @retval EFI_SUCCESS The keyboard layout was retrieved successfully. - @retval EFI_NOT_FOUND The requested keyboard layout was not found. - @retval EFI_INVALID_PARAMETER The KeyboardLayout or KeyboardLayoutLength was - NULL. - -**/ -EFI_STATUS -EFIAPI -HiiGetKeyboardLayout ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN CONST EFI_GUID *KeyGuid, - IN OUT UINT16 *KeyboardLayoutLength, - OUT EFI_HII_KEYBOARD_LAYOUT *KeyboardLayout - ) -; - - -/** - This routine sets the default keyboard layout to the one referenced by KeyGuid. When this routine - is called, an event will be signaled of the EFI_HII_SET_KEYBOARD_LAYOUT_EVENT_GUID - group type. This is so that agents which are sensitive to the current keyboard layout being changed - can be notified of this change. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param KeyGuid A pointer to the unique ID associated with a - given keyboard layout. - - @retval EFI_SUCCESS The current keyboard layout was successfully set. - @retval EFI_NOT_FOUND The referenced keyboard layout was not found, so - action was taken. - @retval EFI_INVALID_PARAMETER The KeyGuid was NULL. - -**/ -EFI_STATUS -EFIAPI -HiiSetKeyboardLayout ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN CONST EFI_GUID *KeyGuid - ) -; - - -/** - Return the EFI handle associated with a package list. - - @param This A pointer to the EFI_HII_DATABASE_PROTOCOL - instance. - @param PackageListHandle An EFI_HII_HANDLE that corresponds to the desired - package list in the HIIdatabase. - @param DriverHandle On return, contains the EFI_HANDLE which was - registered with the package list in - NewPackageList(). - - @retval EFI_SUCCESS The DriverHandle was returned successfully. - @retval EFI_INVALID_PARAMETER The PackageListHandle was not valid or - DriverHandle was NULL. - -**/ -EFI_STATUS -EFIAPI -HiiGetPackageListHandle ( - IN CONST EFI_HII_DATABASE_PROTOCOL *This, - IN EFI_HII_HANDLE PackageListHandle, - OUT EFI_HANDLE *DriverHandle - ) -; - -// -// EFI_HII_CONFIG_ROUTING_PROTOCOL interfaces -// - - -/** - This function allows a caller to extract the current configuration - for one or more named elements from one or more drivers. - - @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL - instance. - @param Request A null-terminated Unicode string in - format. - @param Progress On return, points to a character in the Request - string. Points to the string's null terminator if - request was successful. Points to the most recent - & before the first failing name / value pair (or - the beginning of the string if the failure is in - the first name / value pair) if the request was - not successful. - @param Results Null-terminated Unicode string in - format which has all values - filled in for the names in the Request string. - String to be allocated by the called function. - - @retval EFI_SUCCESS The Results string is filled with the values - corresponding to all requested names. - @retval EFI_OUT_OF_RESOURCES Not enough memory to store the parts of the - results that must be stored awaiting possible - future protocols. - @retval EFI_NOT_FOUND Routing data doesn¡¯t match any known driver. - Progress set to the ¡°G¡± in ¡°GUID¡± of the - routing header that doesn¡¯t match. Note: There - is no requirement that all routing data - be validated before any configuration extraction. - @retval EFI_INVALID_PARAMETER For example, passing in a NULL for the Request - parameter would result in this type of error. The - Progress parameter is set to NULL. - @retval EFI_INVALID_PARAMETER Illegal syntax. Progress set to most recent & - before the error or the beginning of the string. - @retval EFI_INVALID_PARAMETER Unknown name. Progress points to the & before the - name in question. - -**/ -EFI_STATUS -EFIAPI -HiiConfigRoutingExtractConfig ( - IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, - IN CONST EFI_STRING Request, - OUT EFI_STRING *Progress, - OUT EFI_STRING *Results - ) -; - - -/** - This function allows the caller to request the current configuration for the - entirety of the current HII database and returns the data in a null-terminated Unicode string. - - @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL - instance. - @param Results Null-terminated Unicode string in - format which has all values - filled in for the names in the Request string. - String to be allocated by the called function. - De-allocation is up to the caller. - - @retval EFI_SUCCESS The Results string is filled with the values - corresponding to all requested names. - @retval EFI_OUT_OF_RESOURCES Not enough memory to store the parts of the - results that must be stored awaiting possible - future protocols. - @retval EFI_INVALID_PARAMETER For example, passing in a NULL for the Results - parameter would result in this type of error. - -**/ -EFI_STATUS -EFIAPI -HiiConfigRoutingExportConfig ( - IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, - OUT EFI_STRING *Results - ) -; - - -/** - This function processes the results of processing forms and routes it to the - appropriate handlers or storage. - - @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL - instance. - @param Configuration A null-terminated Unicode string in - format. - @param Progress A pointer to a string filled in with the offset - of the most recent & before the first failing - name / value pair (or the beginning of the string - if the failure is in the first name / value pair) - or the terminating NULL if all was successful. - - @retval EFI_SUCCESS The results have been distributed or are awaiting - distribution. - @retval EFI_OUT_OF_RESOURCES Not enough memory to store the parts of the - results that must be stored awaiting possible - future protocols. - @retval EFI_INVALID_PARAMETER Passing in a NULL for the Configuration parameter - would result in this type of error. - @retval EFI_NOT_FOUND Target for the specified routing data was not - found. - -**/ -EFI_STATUS -EFIAPI -HiiConfigRoutingRoutConfig ( - IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, - IN CONST EFI_STRING Configuration, - OUT EFI_STRING *Progress - ) -; - - - -/** - This helper function is to be called by drivers to map configuration data stored - in byte array (¡°block¡±) formats such as UEFI Variables into current configuration strings. - - @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL - instance. - @param ConfigRequest A null-terminated Unicode string in - format. - @param Block Array of bytes defining the block's - configuration. - @param BlockSize Length in bytes of Block. - @param Config Filled-in configuration string. String allocated - by the function. Returned only if call is - successful. - @param Progress A pointer to a string filled in with the offset - of the most recent & before the first failing - name/value pair (or the beginning of the string - if the failure is in the first name / value pair) - or the terminating NULL if all was successful. - - @retval EFI_SUCCESS The request succeeded. Progress points to the - null terminator at the end of the ConfigRequest - string. - @retval EFI_OUT_OF_RESOURCES Not enough memory to allocate Config. - Progress points to the first character of - ConfigRequest. - @retval EFI_INVALID_PARAMETER Passing in a NULL for the ConfigRequest or - Block parameter would result in this type of - error. Progress points to the first character of - ConfigRequest. - @retval EFI_NOT_FOUND Target for the specified routing data was not - found. Progress points to the ¡°G¡± in ¡°GUID¡± of - the errant routing data. - @retval EFI_DEVICE_ERROR Block not large enough. Progress undefined. - @retval EFI_INVALID_PARAMETER Encountered non formatted string. - Block is left updated and Progress points at - the ¡®&¡¯ preceding the first non-. - -**/ -EFI_STATUS -EFIAPI -HiiBlockToConfig ( - IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, - IN CONST EFI_STRING ConfigRequest, - IN CONST UINT8 *Block, - IN CONST UINTN BlockSize, - OUT EFI_STRING *Config, - OUT EFI_STRING *Progress - ) -; - - -/** - This helper function is to be called by drivers to map configuration strings - to configurations stored in byte array (¡°block¡±) formats such as UEFI Variables. - - @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL - instance. - @param ConfigResp A null-terminated Unicode string in - format. - @param Block A possibly null array of bytes representing the - current block. Only bytes referenced in the - ConfigResp string in the block are modified. If - this parameter is null or if the *BlockSize - parameter is (on input) shorter than required by - the Configuration string, only the BlockSize - parameter is updated and an appropriate status - (see below) is returned. - @param BlockSize The length of the Block in units of UINT8. On - input, this is the size of the Block. On output, - if successful, contains the index of the last - modified byte in the Block. - @param Progress On return, points to an element of the ConfigResp - string filled in with the offset of the most - recent '&' before the first failing name / value - pair (or the beginning of the string if the - failure is in the first name / value pair) or - the terminating NULL if all was successful. - - @retval EFI_SUCCESS The request succeeded. Progress points to the - null terminator at the end of the ConfigResp - string. - @retval EFI_OUT_OF_RESOURCES Not enough memory to allocate Config. - Progress points to the first character of - ConfigResp. - @retval EFI_INVALID_PARAMETER Passing in a NULL for the ConfigResp or - Block parameter would result in this type of - error. Progress points to the first character of - ConfigResp. - @retval EFI_NOT_FOUND Target for the specified routing data was not - found. Progress points to the ¡°G¡± in ¡°GUID¡± of - the errant routing data. - @retval EFI_INVALID_PARAMETER Encountered non formatted name / - value pair. Block is left updated and - Progress points at the ¡®&¡¯ preceding the first - non-. - -**/ -EFI_STATUS -EFIAPI -HiiConfigToBlock ( - IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, - IN CONST EFI_STRING ConfigResp, - IN OUT UINT8 *Block, - IN OUT UINTN *BlockSize, - OUT EFI_STRING *Progress - ) -; - - -/** - This helper function is to be called by drivers to extract portions of - a larger configuration string. - - @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL - instance. - @param Configuration A null-terminated Unicode string in - format. - @param Guid A pointer to the GUID value to search for in the - routing portion of the ConfigResp string when - retrieving the requested data. If Guid is NULL, - then all GUID values will be searched for. - @param Name A pointer to the NAME value to search for in the - routing portion of the ConfigResp string when - retrieving the requested data. If Name is NULL, - then all Name values will be searched for. - @param DevicePath A pointer to the PATH value to search for in the - routing portion of the ConfigResp string when - retrieving the requested data. If DevicePath is - NULL, then all DevicePath values will be - searched for. - @param AltCfgId A pointer to the ALTCFG value to search for in - the routing portion of the ConfigResp string - when retrieving the requested data. If this - parameter is NULL, then the current setting will - be retrieved. - @param AltCfgResp A pointer to a buffer which will be allocated by - the function which contains the retrieved string - as requested. This buffer is only allocated if - the call was successful. - - @retval EFI_SUCCESS The request succeeded. The requested data was - extracted and placed in the newly allocated - AltCfgResp buffer. - @retval EFI_OUT_OF_RESOURCES Not enough memory to allocate AltCfgResp. - @retval EFI_INVALID_PARAMETER Any parameter is invalid. - @retval EFI_NOT_FOUND Target for the specified routing data was not - found. - -**/ -EFI_STATUS -EFIAPI -HiiGetAltCfg ( - IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, - IN CONST EFI_STRING Configuration, - IN CONST EFI_GUID *Guid, - IN CONST EFI_STRING Name, - IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath, - IN CONST UINT16 *AltCfgId, - OUT EFI_STRING *AltCfgResp - ) -; - - -// -// Global variables -// -extern EFI_EVENT gHiiKeyboardLayoutChanged; - -#include "R8Lib.h" - -#endif +/** @file + +Copyright (c) 2007, Intel Corporation +All rights reserved. This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +Module Name: + + HiiDatabase.h + +Abstract: + + Private structures definitions in HiiDatabase. + +Revision History + + +**/ + +#ifndef __HII_DATABASE_PRIVATE_H__ +#define __HII_DATABASE_PRIVATE_H__ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +#include +#include +#include +#include +#include +#include +#include + +#define HII_DATABASE_NOTIFY_GUID \ + { \ + 0xc1c76, 0xd79e, 0x42fe, {0x86, 0xb, 0x8b, 0xe8, 0x7b, 0x3e, 0x7a, 0x78} \ + } + +#define MAX_STRING_LENGTH 1024 +#define MAX_FONT_NAME_LEN 256 +#define NARROW_BASELINE 15 +#define WIDE_BASELINE 14 +#define SYS_FONT_INFO_MASK 0x37 +#define REPLACE_UNKNOWN_GLYPH 0xFFFD +#define PROPORTIONAL_GLYPH 0x80 +#define NARROW_GLYPH 0x40 + +#define BITMAP_LEN_1_BIT(Width, Height) (((Width) + 7) / 8 * (Height)) +#define BITMAP_LEN_4_BIT(Width, Height) (((Width) + 1) / 2 * (Height)) +#define BITMAP_LEN_8_BIT(Width, Height) ((Width) * (Height)) +#define BITMAP_LEN_24_BIT(Width, Height) ((Width) * (Height) * 3) + +// +// Storage types +// +#define EFI_HII_VARSTORE_BUFFER 0 +#define EFI_HII_VARSTORE_NAME_VALUE 1 +#define EFI_HII_VARSTORE_EFI_VARIABLE 2 + +#define HII_FORMSET_STORAGE_SIGNATURE EFI_SIGNATURE_32 ('H', 'S', 'T', 'G') +typedef struct { + UINTN Signature; + LIST_ENTRY Entry; + + EFI_HII_HANDLE HiiHandle; + EFI_HANDLE DriverHandle; + + UINT8 Type; // EFI_HII_VARSTORE_BUFFER, EFI_HII_VARSTORE_NAME_VALUE, EFI_HII_VARSTORE_EFI_VARIABLE + EFI_GUID Guid; + CHAR16 *Name; + UINT16 Size; +} HII_FORMSET_STORAGE; + +#define HII_FORMSET_STORAGE_FROM_LINK(a) CR (a, HII_FORMSET_STORAGE, Link, HII_FORMSET_STORAGE_SIGNATURE) + + +// +// String Package definitions +// +#define HII_STRING_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','i','s','p') +typedef struct _HII_STRING_PACKAGE_INSTANCE { + UINTN Signature; + EFI_HII_STRING_PACKAGE_HDR *StringPkgHdr; + UINT8 *StringBlock; + LIST_ENTRY StringEntry; + LIST_ENTRY FontInfoList; // local font info list + UINT8 FontId; +} HII_STRING_PACKAGE_INSTANCE; + +// +// Form Package definitions +// +#define HII_IFR_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','f','r','p') +typedef struct _HII_IFR_PACKAGE_INSTANCE { + UINTN Signature; + EFI_HII_PACKAGE_HEADER FormPkgHdr; + UINT8 *IfrData; + LIST_ENTRY IfrEntry; +} HII_IFR_PACKAGE_INSTANCE; + +// +// Simple Font Package definitions +// +#define HII_S_FONT_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','s','f','p') +typedef struct _HII_SIMPLE_FONT_PACKAGE_INSTANCE { + UINTN Signature; + EFI_HII_SIMPLE_FONT_PACKAGE_HDR *SimpleFontPkgHdr; + LIST_ENTRY SimpleFontEntry; +} HII_SIMPLE_FONT_PACKAGE_INSTANCE; + +// +// Font Package definitions +// +#define HII_FONT_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','i','f','p') +typedef struct _HII_FONT_PACKAGE_INSTANCE { + UINTN Signature; + EFI_HII_FONT_PACKAGE_HDR *FontPkgHdr; + UINT8 *GlyphBlock; + LIST_ENTRY FontEntry; + LIST_ENTRY GlyphInfoList; +} HII_FONT_PACKAGE_INSTANCE; + +#define HII_GLYPH_INFO_SIGNATURE EFI_SIGNATURE_32 ('h','g','i','s') +typedef struct _HII_GLYPH_INFO { + UINTN Signature; + LIST_ENTRY Entry; + CHAR16 CharId; + EFI_HII_GLYPH_INFO Cell; +} HII_GLYPH_INFO; + +#define HII_FONT_INFO_SIGNATURE EFI_SIGNATURE_32 ('h','l','f','i') +typedef struct _HII_FONT_INFO { + UINTN Signature; + LIST_ENTRY Entry; + LIST_ENTRY *GlobalEntry; + UINT8 FontId; +} HII_FONT_INFO; + +#define HII_GLOBAL_FONT_INFO_SIGNATURE EFI_SIGNATURE_32 ('h','g','f','i') +typedef struct _HII_GLOBAL_FONT_INFO { + UINTN Signature; + LIST_ENTRY Entry; + HII_FONT_PACKAGE_INSTANCE *FontPackage; + UINTN FontInfoSize; + EFI_FONT_INFO *FontInfo; +} HII_GLOBAL_FONT_INFO; + +// +// Image Package definitions +// + +#define HII_PIXEL_MASK 0x80 + +typedef struct _HII_IMAGE_PACKAGE_INSTANCE { + EFI_HII_IMAGE_PACKAGE_HDR ImagePkgHdr; + UINT32 ImageBlockSize; + UINT32 PaletteInfoSize; + UINT8 *ImageBlock; + UINT8 *PaletteBlock; +} HII_IMAGE_PACKAGE_INSTANCE; + +// +// Keyboard Layout Pacakge definitions +// +#define HII_KB_LAYOUT_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','k','l','p') +typedef struct _HII_KEYBOARD_LAYOUT_PACKAGE_INSTANCE { + UINTN Signature; + UINT8 *KeyboardPkg; + LIST_ENTRY KeyboardEntry; +} HII_KEYBOARD_LAYOUT_PACKAGE_INSTANCE; + +// +// Guid Package definitions +// +#define HII_GUID_PACKAGE_SIGNATURE EFI_SIGNATURE_32 ('h','i','g','p') +typedef struct _HII_GUID_PACKAGE_INSTANCE { + UINTN Signature; + UINT8 *GuidPkg; + LIST_ENTRY GuidEntry; +} HII_GUID_PACKAGE_INSTANCE; + +// +// A package list can contain only one or less than one device path package. +// This rule also applies to image package since ImageId can not be duplicate. +// +typedef struct _HII_DATABASE_PACKAGE_LIST_INSTANCE { + EFI_HII_PACKAGE_LIST_HEADER PackageListHdr; + LIST_ENTRY GuidPkgHdr; + LIST_ENTRY FormPkgHdr; + LIST_ENTRY KeyboardLayoutHdr; + LIST_ENTRY StringPkgHdr; + LIST_ENTRY FontPkgHdr; + HII_IMAGE_PACKAGE_INSTANCE *ImagePkg; + LIST_ENTRY SimpleFontPkgHdr; + UINT8 *DevicePathPkg; +} HII_DATABASE_PACKAGE_LIST_INSTANCE; + +#define HII_HANDLE_SIGNATURE EFI_SIGNATURE_32 ('h','i','h','l') + +typedef struct { + UINTN Signature; + LIST_ENTRY Handle; + UINTN Key; +} HII_HANDLE; + +#define HII_DATABASE_RECORD_SIGNATURE EFI_SIGNATURE_32 ('h','i','d','r') + +typedef struct _HII_DATABASE_RECORD { + UINTN Signature; + HII_DATABASE_PACKAGE_LIST_INSTANCE *PackageList; + EFI_HANDLE DriverHandle; + EFI_HII_HANDLE Handle; + LIST_ENTRY DatabaseEntry; +} HII_DATABASE_RECORD; + +#define HII_DATABASE_NOTIFY_SIGNATURE EFI_SIGNATURE_32 ('h','i','d','n') + +typedef struct _HII_DATABASE_NOTIFY { + UINTN Signature; + EFI_HANDLE NotifyHandle; + UINT8 PackageType; + EFI_GUID *PackageGuid; + EFI_HII_DATABASE_NOTIFY PackageNotifyFn; + EFI_HII_DATABASE_NOTIFY_TYPE NotifyType; + LIST_ENTRY DatabaseNotifyEntry; +} HII_DATABASE_NOTIFY; + +#define HII_DATABASE_PRIVATE_DATA_SIGNATURE EFI_SIGNATURE_32 ('H', 'i', 'D', 'p') + +typedef struct _HII_DATABASE_PRIVATE_DATA { + UINTN Signature; + LIST_ENTRY DatabaseList; + LIST_ENTRY DatabaseNotifyList; + EFI_HII_FONT_PROTOCOL HiiFont; +#ifndef DISABLE_UNUSED_HII_PROTOCOLS + EFI_HII_IMAGE_PROTOCOL HiiImage; +#endif + EFI_HII_STRING_PROTOCOL HiiString; + EFI_HII_DATABASE_PROTOCOL HiiDatabase; + EFI_HII_CONFIG_ROUTING_PROTOCOL ConfigRouting; + LIST_ENTRY HiiHandleList; + INTN HiiHandleCount; + LIST_ENTRY FontInfoList; // global font info list + UINTN Attribute; // default system color + EFI_GUID CurrentLayoutGuid; + EFI_HII_KEYBOARD_LAYOUT *CurrentLayout; +} HII_DATABASE_PRIVATE_DATA; + +#define HII_FONT_DATABASE_PRIVATE_DATA_FROM_THIS(a) \ + CR (a, \ + HII_DATABASE_PRIVATE_DATA, \ + HiiFont, \ + HII_DATABASE_PRIVATE_DATA_SIGNATURE \ + ) + +#define HII_IMAGE_DATABASE_PRIVATE_DATA_FROM_THIS(a) \ + CR (a, \ + HII_DATABASE_PRIVATE_DATA, \ + HiiImage, \ + HII_DATABASE_PRIVATE_DATA_SIGNATURE \ + ) + +#define HII_STRING_DATABASE_PRIVATE_DATA_FROM_THIS(a) \ + CR (a, \ + HII_DATABASE_PRIVATE_DATA, \ + HiiString, \ + HII_DATABASE_PRIVATE_DATA_SIGNATURE \ + ) + +#define HII_DATABASE_DATABASE_PRIVATE_DATA_FROM_THIS(a) \ + CR (a, \ + HII_DATABASE_PRIVATE_DATA, \ + HiiDatabase, \ + HII_DATABASE_PRIVATE_DATA_SIGNATURE \ + ) + +#define CONFIG_ROUTING_DATABASE_PRIVATE_DATA_FROM_THIS(a) \ + CR (a, \ + HII_DATABASE_PRIVATE_DATA, \ + ConfigRouting, \ + HII_DATABASE_PRIVATE_DATA_SIGNATURE \ + ) + +// +// Internal function prototypes. +// + +/** + This function checks whether a handle is a valid EFI_HII_HANDLE + + @param Handle Pointer to a EFI_HII_HANDLE + + @retval TRUE Valid + @retval FALSE Invalid + +**/ +BOOLEAN +IsHiiHandleValid ( + EFI_HII_HANDLE Handle + ) +; + + +/** + This function checks whether EFI_FONT_INFO exists in current database. If + FontInfoMask is specified, check what options can be used to make a match. + Note that the masks relate to where the system default should be supplied + are ignored by this function. + + @param Private Hii database private structure. + @param FontInfo Points to EFI_FONT_INFO structure. + @param FontInfoMask If not NULL, describes what options can be used + to make a match between the font requested and + the font available. The caller must guarantee + this mask is valid. + @param FontHandle On entry, Points to the font handle returned by a + previous call to GetFontInfo() or NULL to start + with the first font. + @param GlobalFontInfo If not NULL, output the corresponding globa font + info. + + @retval TRUE Existed + @retval FALSE Not existed + +**/ +BOOLEAN +IsFontInfoExisted ( + IN HII_DATABASE_PRIVATE_DATA *Private, + IN EFI_FONT_INFO *FontInfo, + IN EFI_FONT_INFO_MASK *FontInfoMask, OPTIONAL + IN EFI_FONT_HANDLE FontHandle, OPTIONAL + OUT HII_GLOBAL_FONT_INFO **GlobalFontInfo OPTIONAL + ) +; + + +/** + Retrieve system default font and color. + + @param Private HII database driver private data. + @param FontInfo Points to system default font output-related + information. It's caller's responsibility to free + this buffer. + @param FontInfoSize If not NULL, output the size of buffer FontInfo. + + @retval EFI_SUCCESS Cell information is added to the GlyphInfoList. + @retval EFI_OUT_OF_RESOURCES The system is out of resources to accomplish the + task. + @retval EFI_INVALID_PARAMETER Any input parameter is invalid. + +**/ +EFI_STATUS +GetSystemFont ( + IN HII_DATABASE_PRIVATE_DATA *Private, + OUT EFI_FONT_DISPLAY_INFO **FontInfo, + OUT UINTN *FontInfoSize OPTIONAL + ) +; + + +/** + Parse all string blocks to find a String block specified by StringId. + If StringId = (EFI_STRING_ID) (-1), find out all EFI_HII_SIBT_FONT blocks + within this string package and backup its information. + If StringId = 0, output the string id of last string block (EFI_HII_SIBT_END). + + @param Private Hii database private structure. + @param StringPackage Hii string package instance. + @param StringId The string's id, which is unique within + PackageList. + @param BlockType Output the block type of found string block. + @param StringBlockAddr Output the block address of found string block. + @param StringTextOffset Offset, relative to the found block address, of + the string text information. + @param LastStringId Output the last string id when StringId = 0. + + @retval EFI_SUCCESS The string text and font is retrieved + successfully. + @retval EFI_NOT_FOUND The specified text or font info can not be found + out. + @retval EFI_OUT_OF_RESOURCES The system is out of resources to accomplish the + task. + +**/ +EFI_STATUS +FindStringBlock ( + IN HII_DATABASE_PRIVATE_DATA *Private, + IN HII_STRING_PACKAGE_INSTANCE *StringPackage, + IN EFI_STRING_ID StringId, + OUT UINT8 *BlockType, OPTIONAL + OUT UINT8 **StringBlockAddr, OPTIONAL + OUT UINTN *StringTextOffset, OPTIONAL + OUT EFI_STRING_ID *LastStringId OPTIONAL + ) +; + + +/** + Parse all glyph blocks to find a glyph block specified by CharValue. + If CharValue = (CHAR16) (-1), collect all default character cell information + within this font package and backup its information. + + @param FontPackage Hii string package instance. + @param CharValue Unicode character value, which identifies a glyph + block. + @param GlyphBuffer Output the corresponding bitmap data of the found + block. It is the caller's responsiblity to free + this buffer. + @param Cell Output cell information of the encoded bitmap. + @param GlyphBufferLen If not NULL, output the length of GlyphBuffer. + + @retval EFI_SUCCESS The bitmap data is retrieved successfully. + @retval EFI_NOT_FOUND The specified CharValue does not exist in current + database. + @retval EFI_OUT_OF_RESOURCES The system is out of resources to accomplish the + task. + +**/ +EFI_STATUS +FindGlyphBlock ( + IN HII_FONT_PACKAGE_INSTANCE *FontPackage, + IN CHAR16 CharValue, + OUT UINT8 **GlyphBuffer, OPTIONAL + OUT EFI_HII_GLYPH_INFO *Cell, OPTIONAL + OUT UINTN *GlyphBufferLen OPTIONAL + ) +; + +// +// EFI_HII_FONT_PROTOCOL protocol interfaces +// + + +/** + Renders a string to a bitmap or to the display. + + @param This A pointer to the EFI_HII_FONT_PROTOCOL instance. + @param Flags Describes how the string is to be drawn. + @param String Points to the null-terminated string to be + displayed. + @param StringInfo Points to the string output information, + including the color and font. If NULL, then the + string will be output in the default system font + and color. + @param Blt If this points to a non-NULL on entry, this + points to the image, which is Width pixels wide + and Height pixels high. The string will be drawn + onto this image and + EFI_HII_OUT_FLAG_CLIP is implied. If this points + to a NULL on entry, then a buffer + will be allocated to hold the generated image and + the pointer updated on exit. It is the caller's + responsibility to free this buffer. + @param BltX,BLTY Specifies the offset from the left and top edge + of the image of the first character cell in the + image. + @param RowInfoArray If this is non-NULL on entry, then on exit, this + will point to an allocated buffer containing + row information and RowInfoArraySize will be + updated to contain the number of elements. + This array describes the characters which were at + least partially drawn and the heights of the + rows. It is the caller's responsibility to free + this buffer. + @param RowInfoArraySize If this is non-NULL on entry, then on exit it + contains the number of elements in RowInfoArray. + @param ColumnInfoArray If this is non-NULL, then on return it will be + filled with the horizontal offset for each + character in the string on the row where it is + displayed. Non-printing characters will have + the offset ~0. The caller is responsible to + allocate a buffer large enough so that there + is one entry for each character in the string, + not including the null-terminator. It is possible + when character display is normalized that some + character cells overlap. + + @retval EFI_SUCCESS The string was successfully rendered. + @retval EFI_OUT_OF_RESOURCES Unable to allocate an output buffer for + RowInfoArray or Blt. + @retval EFI_INVALID_PARAMETER The String was NULL. + +**/ +EFI_STATUS +EFIAPI +HiiStringToImage ( + IN CONST EFI_HII_FONT_PROTOCOL *This, + IN EFI_HII_OUT_FLAGS Flags, + IN CONST EFI_STRING String, + IN CONST EFI_FONT_DISPLAY_INFO *StringInfo OPTIONAL, + IN OUT EFI_IMAGE_OUTPUT **Blt, + IN UINTN BltX, + IN UINTN BltY, + OUT EFI_HII_ROW_INFO **RowInfoArray OPTIONAL, + OUT UINTN *RowInfoArraySize OPTIONAL, + OUT UINTN *ColumnInfoArray OPTIONAL + ) +; + + +/** + Render a string to a bitmap or the screen containing the contents of the specified string. + + @param This A pointer to the EFI_HII_FONT_PROTOCOL instance. + @param Flags Describes how the string is to be drawn. + @param PackageList The package list in the HII database to search + for the specified string. + @param StringId The string's id, which is unique within + PackageList. + @param Language Points to the language for the retrieved string. + If NULL, then the current system language is + used. + @param StringInfo Points to the string output information, + including the color and font. If NULL, then the + string will be output in the default system font + and color. + @param Blt If this points to a non-NULL on entry, this + points to the image, which is Width pixels wide + and Height pixels high. The string will be drawn + onto this image and + EFI_HII_OUT_FLAG_CLIP is implied. If this points + to a NULL on entry, then a buffer + will be allocated to hold the generated image and + the pointer updated on exit. It is the caller's + responsibility to free this buffer. + @param BltX,BLTY Specifies the offset from the left and top edge + of the image of the first character cell in the + image. + @param RowInfoArray If this is non-NULL on entry, then on exit, this + will point to an allocated buffer containing + row information and RowInfoArraySize will be + updated to contain the number of elements. + This array describes the characters which were at + least partially drawn and the heights of the + rows. It is the caller's responsibility to free + this buffer. + @param RowInfoArraySize If this is non-NULL on entry, then on exit it + contains the number of elements in RowInfoArray. + @param ColumnInfoArray If this is non-NULL, then on return it will be + filled with the horizontal offset for each + character in the string on the row where it is + displayed. Non-printing characters will have + the offset ~0. The caller is responsible to + allocate a buffer large enough so that there + is one entry for each character in the string, + not including the null-terminator. It is possible + when character display is normalized that some + character cells overlap. + + @retval EFI_SUCCESS The string was successfully rendered. + @retval EFI_OUT_OF_RESOURCES Unable to allocate an output buffer for + RowInfoArray or Blt. + @retval EFI_INVALID_PARAMETER The String was NULL. + +**/ +EFI_STATUS +EFIAPI +HiiStringIdToImage ( + IN CONST EFI_HII_FONT_PROTOCOL *This, + IN EFI_HII_OUT_FLAGS Flags, + IN EFI_HII_HANDLE PackageList, + IN EFI_STRING_ID StringId, + IN CONST CHAR8* Language, + IN CONST EFI_FONT_DISPLAY_INFO *StringInfo OPTIONAL, + IN OUT EFI_IMAGE_OUTPUT **Blt, + IN UINTN BltX, + IN UINTN BltY, + OUT EFI_HII_ROW_INFO **RowInfoArray OPTIONAL, + OUT UINTN *RowInfoArraySize OPTIONAL, + OUT UINTN *ColumnInfoArray OPTIONAL + ) +; + + +/** + Convert the glyph for a single character into a bitmap. + + @param This A pointer to the EFI_HII_FONT_PROTOCOL instance. + @param Char Character to retrieve. + @param StringInfo Points to the string font and color information + or NULL if the string should use the default + system font and color. + @param Blt Thus must point to a NULL on entry. A buffer will + be allocated to hold the output and the pointer + updated on exit. It is the caller's + responsibility to free this buffer. + @param Baseline Number of pixels from the bottom of the bitmap to + the baseline. + + @retval EFI_SUCCESS Glyph bitmap created. + @retval EFI_OUT_OF_RESOURCES Unable to allocate the output buffer Blt. + @retval EFI_WARN_UNKNOWN_GLYPH The glyph was unknown and was replaced with the + glyph for Unicode character 0xFFFD. + @retval EFI_INVALID_PARAMETER Blt is NULL or *Blt is not NULL. + +**/ +EFI_STATUS +EFIAPI +HiiGetGlyph ( + IN CONST EFI_HII_FONT_PROTOCOL *This, + IN CHAR16 Char, + IN CONST EFI_FONT_DISPLAY_INFO *StringInfo, + OUT EFI_IMAGE_OUTPUT **Blt, + OUT UINTN *Baseline OPTIONAL + ) +; + + +/** + This function iterates through fonts which match the specified font, using + the specified criteria. If String is non-NULL, then all of the characters in + the string must exist in order for a candidate font to be returned. + + @param This A pointer to the EFI_HII_FONT_PROTOCOL instance. + @param FontHandle On entry, points to the font handle returned by a + previous call to GetFontInfo() or NULL to start + with the first font. On return, points to the + returned font handle or points to NULL if there + are no more matching fonts. + @param StringInfoIn Upon entry, points to the font to return + information about. + @param StringInfoOut Upon return, contains the matching font's + information. If NULL, then no information is + returned. It's caller's responsibility to free + this buffer. + @param String Points to the string which will be tested to + determine if all characters are available. If + NULL, then any font is acceptable. + + @retval EFI_SUCCESS Matching font returned successfully. + @retval EFI_NOT_FOUND No matching font was found. + @retval EFI_INVALID_PARAMETER StringInfoIn is NULL. + @retval EFI_OUT_OF_RESOURCES There were insufficient resources to complete the + request. + +**/ +EFI_STATUS +EFIAPI +HiiGetFontInfo ( + IN CONST EFI_HII_FONT_PROTOCOL *This, + IN OUT EFI_FONT_HANDLE *FontHandle, + IN CONST EFI_FONT_DISPLAY_INFO *StringInfoIn, + OUT EFI_FONT_DISPLAY_INFO **StringInfoOut, + IN CONST EFI_STRING String OPTIONAL + ) +; + +// +// EFI_HII_IMAGE_PROTOCOL interfaces +// + + +/** + This function adds the image Image to the group of images owned by PackageList, and returns + a new image identifier (ImageId). + + @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. + @param PackageList Handle of the package list where this image will + be added. + @param ImageId On return, contains the new image id, which is + unique within PackageList. + @param Image Points to the image. + + @retval EFI_SUCCESS The new image was added successfully. + @retval EFI_NOT_FOUND The specified PackageList could not be found in + database. + @retval EFI_OUT_OF_RESOURCES Could not add the image due to lack of resources. + @retval EFI_INVALID_PARAMETER Image is NULL or ImageId is NULL. + +**/ +EFI_STATUS +EFIAPI +HiiNewImage ( + IN CONST EFI_HII_IMAGE_PROTOCOL *This, + IN EFI_HII_HANDLE PackageList, + OUT EFI_IMAGE_ID *ImageId, + IN CONST EFI_IMAGE_INPUT *Image + ) +; + + +/** + This function retrieves the image specified by ImageId which is associated with + the specified PackageList and copies it into the buffer specified by Image. + + @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. + @param PackageList Handle of the package list where this image will + be searched. + @param ImageId The image's id,, which is unique within + PackageList. + @param Image Points to the image. + @param ImageSize On entry, points to the size of the buffer + pointed to by Image, in bytes. On return, points + to the length of the image, in bytes. + + @retval EFI_SUCCESS The new image was returned successfully. + @retval EFI_NOT_FOUND The image specified by ImageId is not available. + @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to + hold the image. + @retval EFI_INVALID_PARAMETER The Image or ImageSize was NULL. + +**/ +EFI_STATUS +EFIAPI +HiiGetImage ( + IN CONST EFI_HII_IMAGE_PROTOCOL *This, + IN EFI_HII_HANDLE PackageList, + IN EFI_IMAGE_ID ImageId, + OUT EFI_IMAGE_INPUT *Image, + OUT UINTN *ImageSize + ) +; + + +/** + This function updates the image specified by ImageId in the specified PackageListHandle to + the image specified by Image. + + @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. + @param PackageList The package list containing the images. + @param ImageId The image's id,, which is unique within + PackageList. + @param Image Points to the image. + + @retval EFI_SUCCESS The new image was updated successfully. + @retval EFI_NOT_FOUND The image specified by ImageId is not in the + database. + @retval EFI_INVALID_PARAMETER The Image was NULL. + +**/ +EFI_STATUS +EFIAPI +HiiSetImage ( + IN CONST EFI_HII_IMAGE_PROTOCOL *This, + IN EFI_HII_HANDLE PackageList, + IN EFI_IMAGE_ID ImageId, + IN CONST EFI_IMAGE_INPUT *Image + ) +; + + +/** + This function renders an image to a bitmap or the screen using the specified + color and options. It draws the image on an existing bitmap, allocates a new + bitmap or uses the screen. The images can be clipped. + + @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. + @param Flags Describes how the image is to be drawn. + @param Image Points to the image to be displayed. + @param Blt If this points to a non-NULL on entry, this + points to the image, which is Width pixels wide + and Height pixels high. The image will be drawn + onto this image and EFI_HII_DRAW_FLAG_CLIP is + implied. If this points to a NULL on entry, then + a buffer will be allocated to hold the generated + image and the pointer updated on exit. It is the + caller's responsibility to free this buffer. + @param BltY Specifies the offset from the left and top edge + of the output image of the first pixel in the + image. + + @retval EFI_SUCCESS The image was successfully drawn. + @retval EFI_OUT_OF_RESOURCES Unable to allocate an output buffer for Blt. + @retval EFI_INVALID_PARAMETER The Image or Blt was NULL. + @retval EFI_INVALID_PARAMETER Any combination of Flags is invalid. + +**/ +EFI_STATUS +EFIAPI +HiiDrawImage ( + IN CONST EFI_HII_IMAGE_PROTOCOL *This, + IN EFI_HII_DRAW_FLAGS Flags, + IN CONST EFI_IMAGE_INPUT *Image, + IN OUT EFI_IMAGE_OUTPUT **Blt, + IN UINTN BltX, + IN UINTN BltY + ) +; + + +/** + This function renders an image to a bitmap or the screen using the specified + color and options. It draws the image on an existing bitmap, allocates a new + bitmap or uses the screen. The images can be clipped. + + @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. + @param Flags Describes how the image is to be drawn. + @param PackageList The package list in the HII database to search + for the specified image. + @param ImageId The image's id, which is unique within + PackageList. + @param Blt If this points to a non-NULL on entry, this + points to the image, which is Width pixels wide + and Height pixels high. The image will be drawn + onto this image and + EFI_HII_DRAW_FLAG_CLIP is implied. If this points + to a NULL on entry, then a buffer will be + allocated to hold the generated image and the + pointer updated on exit. It is the caller's + responsibility to free this buffer. + @param BltY Specifies the offset from the left and top edge + of the output image of the first pixel in the + image. + + @retval EFI_SUCCESS The image was successfully drawn. + @retval EFI_OUT_OF_RESOURCES Unable to allocate an output buffer for Blt. + @retval EFI_INVALID_PARAMETER The Image was NULL. + @retval EFI_NOT_FOUND The specified packagelist could not be found in + current database. + +**/ +EFI_STATUS +EFIAPI +HiiDrawImageId ( + IN CONST EFI_HII_IMAGE_PROTOCOL *This, + IN EFI_HII_DRAW_FLAGS Flags, + IN EFI_HII_HANDLE PackageList, + IN EFI_IMAGE_ID ImageId, + IN OUT EFI_IMAGE_OUTPUT **Blt, + IN UINTN BltX, + IN UINTN BltY + ) + +; + +// +// EFI_HII_STRING_PROTOCOL +// + + +/** + This function adds the string String to the group of strings owned by PackageList, with the + specified font information StringFontInfo and returns a new string id. + + @param This A pointer to the EFI_HII_STRING_PROTOCOL + instance. + @param PackageList Handle of the package list where this string will + be added. + @param StringId On return, contains the new strings id, which is + unique within PackageList. + @param Language Points to the language for the new string. + @param LanguageName Points to the printable language name to + associate with the passed in Language field.If + LanguageName is not NULL and the string package + header's LanguageName associated with a given + Language is not zero, the LanguageName being + passed in will be ignored. + @param String Points to the new null-terminated string. + @param StringFontInfo Points to the new string's font information or + NULL if the string should have the default system + font, size and style. + + @retval EFI_SUCCESS The new string was added successfully. + @retval EFI_NOT_FOUND The specified PackageList could not be found in + database. + @retval EFI_OUT_OF_RESOURCES Could not add the string due to lack of + resources. + @retval EFI_INVALID_PARAMETER String is NULL or StringId is NULL or Language is + NULL. + +**/ +EFI_STATUS +EFIAPI +HiiNewString ( + IN CONST EFI_HII_STRING_PROTOCOL *This, + IN EFI_HII_HANDLE PackageList, + OUT EFI_STRING_ID *StringId, + IN CONST CHAR8 *Language, + IN CONST CHAR16 *LanguageName, OPTIONAL + IN CONST EFI_STRING String, + IN CONST EFI_FONT_INFO *StringFontInfo OPTIONAL + ) +; + + +/** + This function retrieves the string specified by StringId which is associated + with the specified PackageList in the language Language and copies it into + the buffer specified by String. + + @param This A pointer to the EFI_HII_STRING_PROTOCOL + instance. + @param Language Points to the language for the retrieved string. + @param PackageList The package list in the HII database to search + for the specified string. + @param StringId The string's id, which is unique within + PackageList. + @param String Points to the new null-terminated string. + @param StringSize On entry, points to the size of the buffer + pointed to by String, in bytes. On return, + points to the length of the string, in bytes. + @param StringFontInfo If not NULL, points to the string's font + information. It's caller's responsibility to + free this buffer. + + @retval EFI_SUCCESS The string was returned successfully. + @retval EFI_NOT_FOUND The string specified by StringId is not + available. + @retval EFI_NOT_FOUND The string specified by StringId is available but + not in the specified language. + @retval EFI_BUFFER_TOO_SMALL The buffer specified by StringSize is too small + to hold the string. + @retval EFI_INVALID_PARAMETER The String or Language or StringSize was NULL. + @retval EFI_OUT_OF_RESOURCES There were insufficient resources to complete the + request. + +**/ +EFI_STATUS +EFIAPI +HiiGetString ( + IN CONST EFI_HII_STRING_PROTOCOL *This, + IN CONST CHAR8 *Language, + IN EFI_HII_HANDLE PackageList, + IN EFI_STRING_ID StringId, + OUT EFI_STRING String, + IN OUT UINTN *StringSize, + OUT EFI_FONT_INFO **StringFontInfo OPTIONAL + ) +; + + +/** + This function updates the string specified by StringId in the specified PackageList to the text + specified by String and, optionally, the font information specified by StringFontInfo. + + @param This A pointer to the EFI_HII_STRING_PROTOCOL + instance. + @param PackageList The package list containing the strings. + @param StringId The string's id, which is unique within + PackageList. + @param Language Points to the language for the updated string. + @param String Points to the new null-terminated string. + @param StringFontInfo Points to the string's font information or NULL + if the string font information is not changed. + + @retval EFI_SUCCESS The string was updated successfully. + @retval EFI_NOT_FOUND The string specified by StringId is not in the + database. + @retval EFI_INVALID_PARAMETER The String or Language was NULL. + @retval EFI_OUT_OF_RESOURCES The system is out of resources to accomplish the + task. + +**/ +EFI_STATUS +EFIAPI +HiiSetString ( + IN CONST EFI_HII_STRING_PROTOCOL *This, + IN EFI_HII_HANDLE PackageList, + IN EFI_STRING_ID StringId, + IN CONST CHAR8 *Language, + IN CONST EFI_STRING String, + IN CONST EFI_FONT_INFO *StringFontInfo OPTIONAL + ) +; + + +/** + This function returns the list of supported languages, in the format specified + in Appendix M of UEFI 2.1 spec. + + @param This A pointer to the EFI_HII_STRING_PROTOCOL + instance. + @param PackageList The package list to examine. + @param Languages Points to the buffer to hold the returned string. + @param LanguagesSize On entry, points to the size of the buffer + pointed to by Languages, in bytes. On return, + points to the length of Languages, in bytes. + + @retval EFI_SUCCESS The languages were returned successfully. + @retval EFI_INVALID_PARAMETER The Languages or LanguagesSize was NULL. + @retval EFI_BUFFER_TOO_SMALL The LanguagesSize is too small to hold the list + of supported languages. LanguageSize is updated + to contain the required size. + @retval EFI_NOT_FOUND Could not find string package in specified + packagelist. + +**/ +EFI_STATUS +EFIAPI +HiiGetLanguages ( + IN CONST EFI_HII_STRING_PROTOCOL *This, + IN EFI_HII_HANDLE PackageList, + IN OUT CHAR8 *Languages, + IN OUT UINTN *LanguagesSize + ) +; + + +/** + Each string package has associated with it a single primary language and zero + or more secondary languages. This routine returns the secondary languages + associated with a package list. + + @param This A pointer to the EFI_HII_STRING_PROTOCOL + instance. + @param PackageList The package list to examine. + @param FirstLanguage Points to the primary language. + @param SecondaryLanguages Points to the buffer to hold the returned list of + secondary languages for the specified + FirstLanguage. If there are no secondary + languages, the function returns successfully, + but this is set to NULL. + @param SecondaryLanguageSize On entry, points to the size of the buffer + pointed to by SecondLanguages, in bytes. On + return, points to the length of SecondLanguages + in bytes. + + @retval EFI_SUCCESS Secondary languages were correctly returned. + @retval EFI_INVALID_PARAMETER FirstLanguage or SecondLanguages or + SecondLanguagesSize was NULL. + @retval EFI_BUFFER_TOO_SMALL The buffer specified by SecondLanguagesSize is + too small to hold the returned information. + SecondLanguageSize is updated to hold the size of + the buffer required. + @retval EFI_NOT_FOUND The language specified by FirstLanguage is not + present in the specified package list. + +**/ +EFI_STATUS +EFIAPI +HiiGetSecondaryLanguages ( + IN CONST EFI_HII_STRING_PROTOCOL *This, + IN EFI_HII_HANDLE PackageList, + IN CONST CHAR8 *FirstLanguage, + IN OUT CHAR8 *SecondLanguages, + IN OUT UINTN *SecondLanguagesSize + ) +; + +// +// EFI_HII_DATABASE_PROTOCOL protocol interfaces +// + + +/** + This function adds the packages in the package list to the database and returns a handle. If there is a + EFI_DEVICE_PATH_PROTOCOL associated with the DriverHandle, then this function will + create a package of type EFI_PACKAGE_TYPE_DEVICE_PATH and add it to the package list. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param PackageList A pointer to an EFI_HII_PACKAGE_LIST_HEADER + structure. + @param DriverHandle Associate the package list with this EFI handle. + @param Handle A pointer to the EFI_HII_HANDLE instance. + + @retval EFI_SUCCESS The package list associated with the Handle was + added to the HII database. + @retval EFI_OUT_OF_RESOURCES Unable to allocate necessary resources for the + new database contents. + @retval EFI_INVALID_PARAMETER PackageList is NULL or Handle is NULL. + +**/ +EFI_STATUS +EFIAPI +HiiNewPackageList ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN CONST EFI_HII_PACKAGE_LIST_HEADER *PackageList, + IN CONST EFI_HANDLE DriverHandle, + OUT EFI_HII_HANDLE *Handle + ) +; + + +/** + This function removes the package list that is associated with a handle Handle + from the HII database. Before removing the package, any registered functions + with the notification type REMOVE_PACK and the same package type will be called. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param Handle The handle that was registered to the data that + is requested for removal. + + @retval EFI_SUCCESS The data associated with the Handle was removed + from the HII database. + @retval EFI_NOT_FOUND The specified PackageList could not be found in + database. + @retval EFI_INVALID_PARAMETER The Handle was not valid. + +**/ +EFI_STATUS +EFIAPI +HiiRemovePackageList ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN EFI_HII_HANDLE Handle + ) +; + + +/** + This function updates the existing package list (which has the specified Handle) + in the HII databases, using the new package list specified by PackageList. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param Handle The handle that was registered to the data that + is requested to be updated. + @param PackageList A pointer to an EFI_HII_PACKAGE_LIST_HEADER + package. + + @retval EFI_SUCCESS The HII database was successfully updated. + @retval EFI_OUT_OF_RESOURCES Unable to allocate enough memory for the updated + database. + @retval EFI_INVALID_PARAMETER Handle or PackageList was NULL. + @retval EFI_NOT_FOUND The Handle was not valid or could not be found in + database. + +**/ +EFI_STATUS +EFIAPI +HiiUpdatePackageList ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN EFI_HII_HANDLE Handle, + IN CONST EFI_HII_PACKAGE_LIST_HEADER *PackageList + ) +; + + +/** + This function returns a list of the package handles of the specified type + that are currently active in the database. The pseudo-type + EFI_HII_PACKAGE_TYPE_ALL will cause all package handles to be listed. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param PackageType Specifies the package type of the packages to + list or EFI_HII_PACKAGE_TYPE_ALL for all packages + to be listed. + @param PackageGuid If PackageType is EFI_HII_PACKAGE_TYPE_GUID, then + this is the pointer to the GUID which must match + the Guid field of EFI_HII_GUID_PACKAGE_GUID_HDR. + Otherwise, it must be NULL. + @param HandleBufferLength On input, a pointer to the length of the handle + buffer. On output, the length of the handle + buffer that is required for the handles found. + @param Handle An array of EFI_HII_HANDLE instances returned. + + @retval EFI_SUCCESS The matching handles are outputed successfully. + @retval EFI_BUFFER_TO_SMALL The HandleBufferLength parameter indicates that + Handle is too small to support the number of + handles. HandleBufferLength is updated with a + value that will enable the data to fit. + @retval EFI_NOT_FOUND No matching handle could not be found in + database. + @retval EFI_INVALID_PARAMETER Handle or HandleBufferLength was NULL. + +**/ +EFI_STATUS +EFIAPI +HiiListPackageLists ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN UINT8 PackageType, + IN CONST EFI_GUID *PackageGuid, + IN OUT UINTN *HandleBufferLength, + OUT EFI_HII_HANDLE *Handle + ) +; + + +/** + This function will export one or all package lists in the database to a buffer. + For each package list exported, this function will call functions registered + with EXPORT_PACK and then copy the package list to the buffer. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param Handle An EFI_HII_HANDLE that corresponds to the desired + package list in the HII database to export or + NULL to indicate all package lists should be + exported. + @param BufferSize On input, a pointer to the length of the buffer. + On output, the length of the buffer that is + required for the exported data. + @param Buffer A pointer to a buffer that will contain the + results of the export function. + + @retval EFI_SUCCESS Package exported. + @retval EFI_BUFFER_TO_SMALL The HandleBufferLength parameter indicates that + Handle is too small to support the number of + handles. HandleBufferLength is updated with + a value that will enable the data to fit. + @retval EFI_NOT_FOUND The specifiecd Handle could not be found in the + current database. + @retval EFI_INVALID_PARAMETER Handle or Buffer or BufferSize was NULL. + +**/ +EFI_STATUS +EFIAPI +HiiExportPackageLists ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN EFI_HII_HANDLE Handle, + IN OUT UINTN *BufferSize, + OUT EFI_HII_PACKAGE_LIST_HEADER *Buffer + ) +; + + +/** + This function registers a function which will be called when specified actions related to packages of + the specified type occur in the HII database. By registering a function, other HII-related drivers are + notified when specific package types are added, removed or updated in the HII database. + Each driver or application which registers a notification should use + EFI_HII_DATABASE_PROTOCOL.UnregisterPackageNotify() before exiting. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param PackageType Specifies the package type of the packages to + list or EFI_HII_PACKAGE_TYPE_ALL for all packages + to be listed. + @param PackageGuid If PackageType is EFI_HII_PACKAGE_TYPE_GUID, then + this is the pointer to the GUID which must match + the Guid field of + EFI_HII_GUID_PACKAGE_GUID_HDR. Otherwise, it must + be NULL. + @param PackageNotifyFn Points to the function to be called when the + event specified by + NotificationType occurs. + @param NotifyType Describes the types of notification which this + function will be receiving. + @param NotifyHandle Points to the unique handle assigned to the + registered notification. Can be used in + EFI_HII_DATABASE_PROTOCOL.UnregisterPackageNotify() + to stop notifications. + + @retval EFI_SUCCESS Notification registered successfully. + @retval EFI_OUT_OF_RESOURCES Unable to allocate necessary data structures + @retval EFI_INVALID_PARAMETER NotifyHandle is NULL. + @retval EFI_INVALID_PARAMETER PackageGuid is not NULL when PackageType is not + EFI_HII_PACKAGE_TYPE_GUID. + @retval EFI_INVALID_PARAMETER PackageGuid is NULL when PackageType is + EFI_HII_PACKAGE_TYPE_GUID. + +**/ +EFI_STATUS +EFIAPI +HiiRegisterPackageNotify ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN UINT8 PackageType, + IN CONST EFI_GUID *PackageGuid, + IN CONST EFI_HII_DATABASE_NOTIFY PackageNotifyFn, + IN EFI_HII_DATABASE_NOTIFY_TYPE NotifyType, + OUT EFI_HANDLE *NotifyHandle + ) +; + + +/** + Removes the specified HII database package-related notification. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param NotifyHandle The handle of the notification function being + unregistered. + + @retval EFI_SUCCESS Notification is unregistered successfully. + @retval EFI_INVALID_PARAMETER The Handle is invalid. + +**/ +EFI_STATUS +EFIAPI +HiiUnregisterPackageNotify ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN EFI_HANDLE NotificationHandle + ) +; + + +/** + This routine retrieves an array of GUID values for each keyboard layout that + was previously registered in the system. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param KeyGuidBufferLength On input, a pointer to the length of the keyboard + GUID buffer. On output, the length of the handle + buffer that is required for the handles found. + @param KeyGuidBuffer An array of keyboard layout GUID instances + returned. + + @retval EFI_SUCCESS KeyGuidBuffer was updated successfully. + @retval EFI_BUFFER_TOO_SMALL The KeyGuidBufferLength parameter indicates + that KeyGuidBuffer is too small to support the + number of GUIDs. KeyGuidBufferLength is + updated with a value that will enable the data to + fit. + @retval EFI_INVALID_PARAMETER The KeyGuidBuffer or KeyGuidBufferLength was + NULL. + @retval EFI_NOT_FOUND There was no keyboard layout. + +**/ +EFI_STATUS +EFIAPI +HiiFindKeyboardLayouts ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN OUT UINT16 *KeyGuidBufferLength, + OUT EFI_GUID *KeyGuidBuffer + ) +; + + +/** + This routine retrieves the requested keyboard layout. The layout is a physical description of the keys + on a keyboard and the character(s) that are associated with a particular set of key strokes. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param KeyGuid A pointer to the unique ID associated with a + given keyboard layout. If KeyGuid is NULL then + the current layout will be retrieved. + @param KeyboardLayoutLength On input, a pointer to the length of the + KeyboardLayout buffer. On output, the length of + the data placed into KeyboardLayout. + @param KeyboardLayout A pointer to a buffer containing the retrieved + keyboard layout. + + @retval EFI_SUCCESS The keyboard layout was retrieved successfully. + @retval EFI_NOT_FOUND The requested keyboard layout was not found. + @retval EFI_INVALID_PARAMETER The KeyboardLayout or KeyboardLayoutLength was + NULL. + +**/ +EFI_STATUS +EFIAPI +HiiGetKeyboardLayout ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN CONST EFI_GUID *KeyGuid, + IN OUT UINT16 *KeyboardLayoutLength, + OUT EFI_HII_KEYBOARD_LAYOUT *KeyboardLayout + ) +; + + +/** + This routine sets the default keyboard layout to the one referenced by KeyGuid. When this routine + is called, an event will be signaled of the EFI_HII_SET_KEYBOARD_LAYOUT_EVENT_GUID + group type. This is so that agents which are sensitive to the current keyboard layout being changed + can be notified of this change. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param KeyGuid A pointer to the unique ID associated with a + given keyboard layout. + + @retval EFI_SUCCESS The current keyboard layout was successfully set. + @retval EFI_NOT_FOUND The referenced keyboard layout was not found, so + action was taken. + @retval EFI_INVALID_PARAMETER The KeyGuid was NULL. + +**/ +EFI_STATUS +EFIAPI +HiiSetKeyboardLayout ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN CONST EFI_GUID *KeyGuid + ) +; + + +/** + Return the EFI handle associated with a package list. + + @param This A pointer to the EFI_HII_DATABASE_PROTOCOL + instance. + @param PackageListHandle An EFI_HII_HANDLE that corresponds to the desired + package list in the HIIdatabase. + @param DriverHandle On return, contains the EFI_HANDLE which was + registered with the package list in + NewPackageList(). + + @retval EFI_SUCCESS The DriverHandle was returned successfully. + @retval EFI_INVALID_PARAMETER The PackageListHandle was not valid or + DriverHandle was NULL. + +**/ +EFI_STATUS +EFIAPI +HiiGetPackageListHandle ( + IN CONST EFI_HII_DATABASE_PROTOCOL *This, + IN EFI_HII_HANDLE PackageListHandle, + OUT EFI_HANDLE *DriverHandle + ) +; + +// +// EFI_HII_CONFIG_ROUTING_PROTOCOL interfaces +// + + +/** + This function allows a caller to extract the current configuration + for one or more named elements from one or more drivers. + + @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL + instance. + @param Request A null-terminated Unicode string in + format. + @param Progress On return, points to a character in the Request + string. Points to the string's null terminator if + request was successful. Points to the most recent + & before the first failing name / value pair (or + the beginning of the string if the failure is in + the first name / value pair) if the request was + not successful. + @param Results Null-terminated Unicode string in + format which has all values + filled in for the names in the Request string. + String to be allocated by the called function. + + @retval EFI_SUCCESS The Results string is filled with the values + corresponding to all requested names. + @retval EFI_OUT_OF_RESOURCES Not enough memory to store the parts of the + results that must be stored awaiting possible + future protocols. + @retval EFI_NOT_FOUND Routing data doesn't match any known driver. + Progress set to the "G" in "GUID" of the + routing header that doesn't match. Note: There + is no requirement that all routing data + be validated before any configuration extraction. + @retval EFI_INVALID_PARAMETER For example, passing in a NULL for the Request + parameter would result in this type of error. The + Progress parameter is set to NULL. + @retval EFI_INVALID_PARAMETER Illegal syntax. Progress set to most recent & + before the error or the beginning of the string. + @retval EFI_INVALID_PARAMETER Unknown name. Progress points to the & before the + name in question. + +**/ +EFI_STATUS +EFIAPI +HiiConfigRoutingExtractConfig ( + IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, + IN CONST EFI_STRING Request, + OUT EFI_STRING *Progress, + OUT EFI_STRING *Results + ) +; + + +/** + This function allows the caller to request the current configuration for the + entirety of the current HII database and returns the data in a null-terminated Unicode string. + + @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL + instance. + @param Results Null-terminated Unicode string in + format which has all values + filled in for the names in the Request string. + String to be allocated by the called function. + De-allocation is up to the caller. + + @retval EFI_SUCCESS The Results string is filled with the values + corresponding to all requested names. + @retval EFI_OUT_OF_RESOURCES Not enough memory to store the parts of the + results that must be stored awaiting possible + future protocols. + @retval EFI_INVALID_PARAMETER For example, passing in a NULL for the Results + parameter would result in this type of error. + +**/ +EFI_STATUS +EFIAPI +HiiConfigRoutingExportConfig ( + IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, + OUT EFI_STRING *Results + ) +; + + +/** + This function processes the results of processing forms and routes it to the + appropriate handlers or storage. + + @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL + instance. + @param Configuration A null-terminated Unicode string in + format. + @param Progress A pointer to a string filled in with the offset + of the most recent & before the first failing + name / value pair (or the beginning of the string + if the failure is in the first name / value pair) + or the terminating NULL if all was successful. + + @retval EFI_SUCCESS The results have been distributed or are awaiting + distribution. + @retval EFI_OUT_OF_RESOURCES Not enough memory to store the parts of the + results that must be stored awaiting possible + future protocols. + @retval EFI_INVALID_PARAMETER Passing in a NULL for the Configuration parameter + would result in this type of error. + @retval EFI_NOT_FOUND Target for the specified routing data was not + found. + +**/ +EFI_STATUS +EFIAPI +HiiConfigRoutingRoutConfig ( + IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, + IN CONST EFI_STRING Configuration, + OUT EFI_STRING *Progress + ) +; + + + +/** + This helper function is to be called by drivers to map configuration data stored + in byte array ("block") formats such as UEFI Variables into current configuration strings. + + @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL + instance. + @param ConfigRequest A null-terminated Unicode string in + format. + @param Block Array of bytes defining the block's + configuration. + @param BlockSize Length in bytes of Block. + @param Config Filled-in configuration string. String allocated + by the function. Returned only if call is + successful. + @param Progress A pointer to a string filled in with the offset + of the most recent & before the first failing + name/value pair (or the beginning of the string + if the failure is in the first name / value pair) + or the terminating NULL if all was successful. + + @retval EFI_SUCCESS The request succeeded. Progress points to the + null terminator at the end of the ConfigRequest + string. + @retval EFI_OUT_OF_RESOURCES Not enough memory to allocate Config. + Progress points to the first character of + ConfigRequest. + @retval EFI_INVALID_PARAMETER Passing in a NULL for the ConfigRequest or + Block parameter would result in this type of + error. Progress points to the first character of + ConfigRequest. + @retval EFI_NOT_FOUND Target for the specified routing data was not + found. Progress points to the "G" in "GUID" of + the errant routing data. + @retval EFI_DEVICE_ERROR Block not large enough. Progress undefined. + @retval EFI_INVALID_PARAMETER Encountered non formatted string. + Block is left updated and Progress points at + the '&' preceding the first non-. + +**/ +EFI_STATUS +EFIAPI +HiiBlockToConfig ( + IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, + IN CONST EFI_STRING ConfigRequest, + IN CONST UINT8 *Block, + IN CONST UINTN BlockSize, + OUT EFI_STRING *Config, + OUT EFI_STRING *Progress + ) +; + + +/** + This helper function is to be called by drivers to map configuration strings + to configurations stored in byte array ("block") formats such as UEFI Variables. + + @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL + instance. + @param ConfigResp A null-terminated Unicode string in + format. + @param Block A possibly null array of bytes representing the + current block. Only bytes referenced in the + ConfigResp string in the block are modified. If + this parameter is null or if the *BlockSize + parameter is (on input) shorter than required by + the Configuration string, only the BlockSize + parameter is updated and an appropriate status + (see below) is returned. + @param BlockSize The length of the Block in units of UINT8. On + input, this is the size of the Block. On output, + if successful, contains the index of the last + modified byte in the Block. + @param Progress On return, points to an element of the ConfigResp + string filled in with the offset of the most + recent '&' before the first failing name / value + pair (or the beginning of the string if the + failure is in the first name / value pair) or + the terminating NULL if all was successful. + + @retval EFI_SUCCESS The request succeeded. Progress points to the + null terminator at the end of the ConfigResp + string. + @retval EFI_OUT_OF_RESOURCES Not enough memory to allocate Config. + Progress points to the first character of + ConfigResp. + @retval EFI_INVALID_PARAMETER Passing in a NULL for the ConfigResp or + Block parameter would result in this type of + error. Progress points to the first character of + ConfigResp. + @retval EFI_NOT_FOUND Target for the specified routing data was not + found. Progress points to the "G" in "GUID" of + the errant routing data. + @retval EFI_INVALID_PARAMETER Encountered non formatted name / + value pair. Block is left updated and + Progress points at the '&' preceding the first + non-. + +**/ +EFI_STATUS +EFIAPI +HiiConfigToBlock ( + IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, + IN CONST EFI_STRING ConfigResp, + IN OUT UINT8 *Block, + IN OUT UINTN *BlockSize, + OUT EFI_STRING *Progress + ) +; + + +/** + This helper function is to be called by drivers to extract portions of + a larger configuration string. + + @param This A pointer to the EFI_HII_CONFIG_ROUTING_PROTOCOL + instance. + @param Configuration A null-terminated Unicode string in + format. + @param Guid A pointer to the GUID value to search for in the + routing portion of the ConfigResp string when + retrieving the requested data. If Guid is NULL, + then all GUID values will be searched for. + @param Name A pointer to the NAME value to search for in the + routing portion of the ConfigResp string when + retrieving the requested data. If Name is NULL, + then all Name values will be searched for. + @param DevicePath A pointer to the PATH value to search for in the + routing portion of the ConfigResp string when + retrieving the requested data. If DevicePath is + NULL, then all DevicePath values will be + searched for. + @param AltCfgId A pointer to the ALTCFG value to search for in + the routing portion of the ConfigResp string + when retrieving the requested data. If this + parameter is NULL, then the current setting will + be retrieved. + @param AltCfgResp A pointer to a buffer which will be allocated by + the function which contains the retrieved string + as requested. This buffer is only allocated if + the call was successful. + + @retval EFI_SUCCESS The request succeeded. The requested data was + extracted and placed in the newly allocated + AltCfgResp buffer. + @retval EFI_OUT_OF_RESOURCES Not enough memory to allocate AltCfgResp. + @retval EFI_INVALID_PARAMETER Any parameter is invalid. + @retval EFI_NOT_FOUND Target for the specified routing data was not + found. + +**/ +EFI_STATUS +EFIAPI +HiiGetAltCfg ( + IN CONST EFI_HII_CONFIG_ROUTING_PROTOCOL *This, + IN CONST EFI_STRING Configuration, + IN CONST EFI_GUID *Guid, + IN CONST EFI_STRING Name, + IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath, + IN CONST UINT16 *AltCfgId, + OUT EFI_STRING *AltCfgResp + ) +; + + +// +// Global variables +// +extern EFI_EVENT gHiiKeyboardLayoutChanged; + +#include "R8Lib.h" + +#endif diff --git a/MdeModulePkg/Universal/HiiDatabaseDxe/Image.c b/MdeModulePkg/Universal/HiiDatabaseDxe/Image.c index 06d783a880..341a50a7e8 100644 --- a/MdeModulePkg/Universal/HiiDatabaseDxe/Image.c +++ b/MdeModulePkg/Universal/HiiDatabaseDxe/Image.c @@ -790,7 +790,7 @@ HiiNewImage ( @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. @param PackageList Handle of the package list where this image will be searched. - @param ImageId The image¡¯s id,, which is unique within + @param ImageId The image's id,, which is unique within PackageList. @param Image Points to the image. @param ImageSize On entry, points to the size of the buffer pointed @@ -993,7 +993,7 @@ HiiGetImage ( @param This A pointer to the EFI_HII_IMAGE_PROTOCOL instance. @param PackageList The package list containing the images. - @param ImageId The image¡¯s id,, which is unique within + @param ImageId The image's id,, which is unique within PackageList. @param Image Points to the image. @@ -1196,7 +1196,7 @@ HiiSetImage ( this image and EFI_HII_DRAW_FLAG_CLIP is implied. If this points to a NULL on entry, then a buffer will be allocated to hold the generated image and - the pointer updated on exit. It is the caller¡¯s + the pointer updated on exit. It is the caller's responsibility to free this buffer. @param BltY Specifies the offset from the left and top edge of the output image of the first pixel in the image. @@ -1441,7 +1441,7 @@ HiiDrawImage ( EFI_HII_DRAW_FLAG_CLIP is implied. If this points to a NULL on entry, then a buffer will be allocated to hold the generated image and the - pointer updated on exit. It is the caller¡¯s + pointer updated on exit. It is the caller's responsibility to free this buffer. @param BltY Specifies the offset from the left and top edge of the output image of the first pixel in the image. diff --git a/MdeModulePkg/Universal/HiiDatabaseDxe/String.c b/MdeModulePkg/Universal/HiiDatabaseDxe/String.c index d408365a89..0d830106cd 100644 --- a/MdeModulePkg/Universal/HiiDatabaseDxe/String.c +++ b/MdeModulePkg/Universal/HiiDatabaseDxe/String.c @@ -249,7 +249,7 @@ GetStringFontInfo ( @param Private Hii database private structure. @param StringPackage Hii string package instance. - @param StringId The string¡¯s id, which is unique within + @param StringId The string's id, which is unique within PackageList. @param BlockType Output the block type of found string block. @param StringBlockAddr Output the block address of found string block. @@ -567,7 +567,7 @@ FindStringBlock ( @param Private Hii database private structure. @param StringPackage Hii string package instance. - @param StringId The string¡¯s id, which is unique within + @param StringId The string's id, which is unique within PackageList. @param String Points to retrieved null-terminated string. @param StringSize On entry, points to the size of the buffer pointed @@ -672,7 +672,7 @@ GetStringWorker ( @param Private HII database driver private structure. @param StringPackage HII string package instance. - @param StringId The string¡¯s id, which is unique within + @param StringId The string's id, which is unique within PackageList. @param String Points to the new null-terminated string. @param StringFontInfo Points to the input font info. @@ -909,7 +909,7 @@ SetStringWorker ( not zero, the LanguageName being passed in will be ignored. @param String Points to the new null-terminated string. - @param StringFontInfo Points to the new string¡¯s font information or + @param StringFontInfo Points to the new string's font information or NULL if the string should have the default system font, size and style. @@ -1251,7 +1251,7 @@ HiiNewString ( @param StringSize On entry, points to the size of the buffer pointed to by String, in bytes. On return, points to the length of the string, in bytes. - @param StringFontInfo If not NULL, points to the string¡¯s font + @param StringFontInfo If not NULL, points to the string's font information. It's caller's responsibility to free this buffer. @@ -1334,11 +1334,11 @@ HiiGetString ( @param This A pointer to the EFI_HII_STRING_PROTOCOL instance. @param PackageList The package list containing the strings. - @param StringId The string¡¯s id, which is unique within + @param StringId The string's id, which is unique within PackageList. @param Language Points to the language for the updated string. @param String Points to the new null-terminated string. - @param StringFontInfo Points to the string¡¯s font information or NULL if + @param StringFontInfo Points to the string's font information or NULL if the string font information is not changed. @retval EFI_SUCCESS The string was updated successfully. diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h index 0733da131b..6961c0a229 100644 --- a/MdePkg/Include/Library/BaseLib.h +++ b/MdePkg/Include/Library/BaseLib.h @@ -1,7239 +1,7239 @@ -/** @file - Memory-only library functions with no library constructor/destructor - - Copyright (c) 2006 - 2007, Intel Corporation - All rights reserved. This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __BASE_LIB__ -#define __BASE_LIB__ - -// -// Definitions for architecture specific types -// These include SPIN_LOCK and BASE_LIBRARY_JUMP_BUFFER -// - -// -// SPIN_LOCK -// -typedef volatile UINTN SPIN_LOCK; - -#if defined (MDE_CPU_IA32) -// -// IA32 context buffer used by SetJump() and LongJump() -// -typedef struct { - UINT32 Ebx; - UINT32 Esi; - UINT32 Edi; - UINT32 Ebp; - UINT32 Esp; - UINT32 Eip; -} BASE_LIBRARY_JUMP_BUFFER; - -#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 4 - -#elif defined (MDE_CPU_IPF) - -// -// IPF context buffer used by SetJump() and LongJump() -// -typedef struct { - UINT64 F2[2]; - UINT64 F3[2]; - UINT64 F4[2]; - UINT64 F5[2]; - UINT64 F16[2]; - UINT64 F17[2]; - UINT64 F18[2]; - UINT64 F19[2]; - UINT64 F20[2]; - UINT64 F21[2]; - UINT64 F22[2]; - UINT64 F23[2]; - UINT64 F24[2]; - UINT64 F25[2]; - UINT64 F26[2]; - UINT64 F27[2]; - UINT64 F28[2]; - UINT64 F29[2]; - UINT64 F30[2]; - UINT64 F31[2]; - UINT64 R4; - UINT64 R5; - UINT64 R6; - UINT64 R7; - UINT64 SP; - UINT64 BR0; - UINT64 BR1; - UINT64 BR2; - UINT64 BR3; - UINT64 BR4; - UINT64 BR5; - UINT64 InitialUNAT; - UINT64 AfterSpillUNAT; - UINT64 PFS; - UINT64 BSP; - UINT64 Predicates; - UINT64 LoopCount; - UINT64 FPSR; -} BASE_LIBRARY_JUMP_BUFFER; - -#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 0x10 - -#elif defined (MDE_CPU_X64) -// -// X64 context buffer used by SetJump() and LongJump() -// -typedef struct { - UINT64 Rbx; - UINT64 Rsp; - UINT64 Rbp; - UINT64 Rdi; - UINT64 Rsi; - UINT64 R12; - UINT64 R13; - UINT64 R14; - UINT64 R15; - UINT64 Rip; -} BASE_LIBRARY_JUMP_BUFFER; - -#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 8 - -#elif defined (MDE_CPU_EBC) -// -// EBC context buffer used by SetJump() and LongJump() -// -typedef struct { - UINT64 R0; - UINT64 R1; - UINT64 R2; - UINT64 R3; - UINT64 IP; -} BASE_LIBRARY_JUMP_BUFFER; - -#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 8 - -#else -#error Unknown Processor Type -#endif - -// -// String Services -// - -/** - Copies one Null-terminated Unicode string to another Null-terminated Unicode - string and returns the new Unicode string. - - This function copies the contents of the Unicode string Source to the Unicode - string Destination, and returns Destination. If Source and Destination - overlap, then the results are undefined. - - If Destination is NULL, then ASSERT(). - If Destination is not aligned on a 16-bit boundary, then ASSERT(). - If Source is NULL, then ASSERT(). - If Source is not aligned on a 16-bit boundary, then ASSERT(). - If Source and Destination overlap, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and Source contains more than - PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - - @param Destination Pointer to a Null-terminated Unicode string. - @param Source Pointer to a Null-terminated Unicode string. - - @return Destiantion - -**/ -CHAR16 * -EFIAPI -StrCpy ( - OUT CHAR16 *Destination, - IN CONST CHAR16 *Source - ); - - -/** - Copies one Null-terminated Unicode string with a maximum length to another - Null-terminated Unicode string with a maximum length and returns the new - Unicode string. - - This function copies the contents of the Unicode string Source to the Unicode - string Destination, and returns Destination. At most, Length Unicode - characters are copied from Source to Destination. If Length is 0, then - Destination is returned unmodified. If Length is greater that the number of - Unicode characters in Source, then Destination is padded with Null Unicode - characters. If Source and Destination overlap, then the results are - undefined. - - If Length > 0 and Destination is NULL, then ASSERT(). - If Length > 0 and Destination is not aligned on a 16-bit boundary, then ASSERT(). - If Length > 0 and Source is NULL, then ASSERT(). - If Length > 0 and Source is not aligned on a 16-bit bounadry, then ASSERT(). - If Source and Destination overlap, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and Source contains more than - PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - - @param Destination Pointer to a Null-terminated Unicode string. - @param Source Pointer to a Null-terminated Unicode string. - @param Length Maximum number of Unicode characters to copy. - - @return Destination - -**/ -CHAR16 * -EFIAPI -StrnCpy ( - OUT CHAR16 *Destination, - IN CONST CHAR16 *Source, - IN UINTN Length - ); - - -/** - Returns the length of a Null-terminated Unicode string. - - This function returns the number of Unicode characters in the Null-terminated - Unicode string specified by String. - - If String is NULL, then ASSERT(). - If String is not aligned on a 16-bit boundary, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and String contains more than - PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - - @param String Pointer to a Null-terminated Unicode string. - - @return The length of String. - -**/ -UINTN -EFIAPI -StrLen ( - IN CONST CHAR16 *String - ); - - -/** - Returns the size of a Null-terminated Unicode string in bytes, including the - Null terminator. - - This function returns the size, in bytes, of the Null-terminated Unicode - string specified by String. - - If String is NULL, then ASSERT(). - If String is not aligned on a 16-bit boundary, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and String contains more than - PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - - @param String Pointer to a Null-terminated Unicode string. - - @return The size of String. - -**/ -UINTN -EFIAPI -StrSize ( - IN CONST CHAR16 *String - ); - - -/** - Compares two Null-terminated Unicode strings, and returns the difference - between the first mismatched Unicode characters. - - This function compares the Null-terminated Unicode string FirstString to the - Null-terminated Unicode string SecondString. If FirstString is identical to - SecondString, then 0 is returned. Otherwise, the value returned is the first - mismatched Unicode character in SecondString subtracted from the first - mismatched Unicode character in FirstString. - - If FirstString is NULL, then ASSERT(). - If FirstString is not aligned on a 16-bit boundary, then ASSERT(). - If SecondString is NULL, then ASSERT(). - If SecondString is not aligned on a 16-bit boundary, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and FirstString contains more - than PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and SecondString contains more - than PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - - @param FirstString Pointer to a Null-terminated Unicode string. - @param SecondString Pointer to a Null-terminated Unicode string. - - @retval 0 FirstString is identical to SecondString. - @retval !=0 FirstString is not identical to SecondString. - -**/ -INTN -EFIAPI -StrCmp ( - IN CONST CHAR16 *FirstString, - IN CONST CHAR16 *SecondString - ); - - -/** - Compares two Null-terminated Unicode strings with maximum lengths, and - returns the difference between the first mismatched Unicode characters. - - This function compares the Null-terminated Unicode string FirstString to the - Null-terminated Unicode string SecondString. At most, Length Unicode - characters will be compared. If Length is 0, then 0 is returned. If - FirstString is identical to SecondString, then 0 is returned. Otherwise, the - value returned is the first mismatched Unicode character in SecondString - subtracted from the first mismatched Unicode character in FirstString. - - If Length > 0 and FirstString is NULL, then ASSERT(). - If Length > 0 and FirstString is not aligned on a 16-bit bounadary, then ASSERT(). - If Length > 0 and SecondString is NULL, then ASSERT(). - If Length > 0 and SecondString is not aligned on a 16-bit bounadary, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and FirstString contains more - than PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and SecondString contains more - than PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - - @param FirstString Pointer to a Null-terminated Unicode string. - @param SecondString Pointer to a Null-terminated Unicode string. - @param Length Maximum number of Unicode characters to compare. - - @retval 0 FirstString is identical to SecondString. - @retval !=0 FirstString is not identical to SecondString. - -**/ -INTN -EFIAPI -StrnCmp ( - IN CONST CHAR16 *FirstString, - IN CONST CHAR16 *SecondString, - IN UINTN Length - ); - - -/** - Concatenates one Null-terminated Unicode string to another Null-terminated - Unicode string, and returns the concatenated Unicode string. - - This function concatenates two Null-terminated Unicode strings. The contents - of Null-terminated Unicode string Source are concatenated to the end of - Null-terminated Unicode string Destination. The Null-terminated concatenated - Unicode String is returned. If Source and Destination overlap, then the - results are undefined. - - If Destination is NULL, then ASSERT(). - If Destination is not aligned on a 16-bit bounadary, then ASSERT(). - If Source is NULL, then ASSERT(). - If Source is not aligned on a 16-bit bounadary, then ASSERT(). - If Source and Destination overlap, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and Destination contains more - than PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and Source contains more than - PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and concatenating Destination - and Source results in a Unicode string with more than - PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - - @param Destination Pointer to a Null-terminated Unicode string. - @param Source Pointer to a Null-terminated Unicode string. - - @return Destination - -**/ -CHAR16 * -EFIAPI -StrCat ( - IN OUT CHAR16 *Destination, - IN CONST CHAR16 *Source - ); - - -/** - Concatenates one Null-terminated Unicode string with a maximum length to the - end of another Null-terminated Unicode string, and returns the concatenated - Unicode string. - - This function concatenates two Null-terminated Unicode strings. The contents - of Null-terminated Unicode string Source are concatenated to the end of - Null-terminated Unicode string Destination, and Destination is returned. At - most, Length Unicode characters are concatenated from Source to the end of - Destination, and Destination is always Null-terminated. If Length is 0, then - Destination is returned unmodified. If Source and Destination overlap, then - the results are undefined. - - If Destination is NULL, then ASSERT(). - If Length > 0 and Destination is not aligned on a 16-bit boundary, then ASSERT(). - If Length > 0 and Source is NULL, then ASSERT(). - If Length > 0 and Source is not aligned on a 16-bit boundary, then ASSERT(). - If Source and Destination overlap, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and Destination contains more - than PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and Source contains more than - PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and concatenating Destination - and Source results in a Unicode string with more than - PcdMaximumUnicodeStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - - @param Destination Pointer to a Null-terminated Unicode string. - @param Source Pointer to a Null-terminated Unicode string. - @param Length Maximum number of Unicode characters to concatenate from - Source. - - @return Destination - -**/ -CHAR16 * -EFIAPI -StrnCat ( - IN OUT CHAR16 *Destination, - IN CONST CHAR16 *Source, - IN UINTN Length - ); - -/** - Returns the first occurance of a Null-terminated Unicode sub-string - in a Null-terminated Unicode string. - - This function scans the contents of the Null-terminated Unicode string - specified by String and returns the first occurrence of SearchString. - If SearchString is not found in String, then NULL is returned. If - the length of SearchString is zero, then String is - returned. - - If String is NULL, then ASSERT(). - If String is not aligned on a 16-bit boundary, then ASSERT(). - If SearchString is NULL, then ASSERT(). - If SearchString is not aligned on a 16-bit boundary, then ASSERT(). - - If PcdMaximumUnicodeStringLength is not zero, and SearchString - or String contains more than PcdMaximumUnicodeStringLength Unicode - characters not including the Null-terminator, then ASSERT(). - - @param String Pointer to a Null-terminated Unicode string. - @param SearchString Pointer to a Null-terminated Unicode string to search for. - - @retval NULL If the SearchString does not appear in String. - @retval !NULL If there is a match. - -**/ -CHAR16 * -EFIAPI -StrStr ( - IN CONST CHAR16 *String, - IN CONST CHAR16 *SearchString - ); - -/** - Convert a Null-terminated Unicode decimal string to a value of - type UINTN. - - This function returns a value of type UINTN by interpreting the contents - of the Unicode string specified by String as a decimal number. The format - of the input Unicode string String is: - - [spaces] [decimal digits]. - - The valid decimal digit character is in the range [0-9]. The - function will ignore the pad space, which includes spaces or - tab characters, before [decimal digits]. The running zero in the - beginning of [decimal digits] will be ignored. Then, the function - stops at the first character that is a not a valid decimal character - or a Null-terminator, whichever one comes first. - - If String is NULL, then ASSERT(). - If String is not aligned in a 16-bit boundary, then ASSERT(). - If String has only pad spaces, then 0 is returned. - If String has no pad spaces or valid decimal digits, - then 0 is returned. - If the number represented by String overflows according - to the range defined by UINTN, then ASSERT(). - - If PcdMaximumUnicodeStringLength is not zero, and String contains - more than PcdMaximumUnicodeStringLength Unicode characters not including - the Null-terminator, then ASSERT(). - - @param String Pointer to a Null-terminated Unicode string. - - @retval UINTN - -**/ -UINTN -EFIAPI -StrDecimalToUintn ( - IN CONST CHAR16 *String - ); - -/** - Convert a Null-terminated Unicode decimal string to a value of - type UINT64. - - This function returns a value of type UINT64 by interpreting the contents - of the Unicode string specified by String as a decimal number. The format - of the input Unicode string String is: - - [spaces] [decimal digits]. - - The valid decimal digit character is in the range [0-9]. The - function will ignore the pad space, which includes spaces or - tab characters, before [decimal digits]. The running zero in the - beginning of [decimal digits] will be ignored. Then, the function - stops at the first character that is a not a valid decimal character - or a Null-terminator, whichever one comes first. - - If String is NULL, then ASSERT(). - If String is not aligned in a 16-bit boundary, then ASSERT(). - If String has only pad spaces, then 0 is returned. - If String has no pad spaces or valid decimal digits, - then 0 is returned. - If the number represented by String overflows according - to the range defined by UINT64, then ASSERT(). - - If PcdMaximumUnicodeStringLength is not zero, and String contains - more than PcdMaximumUnicodeStringLength Unicode characters not including - the Null-terminator, then ASSERT(). - - @param String Pointer to a Null-terminated Unicode string. - - @retval UINT64 - -**/ -UINT64 -EFIAPI -StrDecimalToUint64 ( - IN CONST CHAR16 *String - ); - - -/** - Convert a Null-terminated Unicode hexadecimal string to a value of type UINTN. - - This function returns a value of type UINTN by interpreting the contents - of the Unicode string specified by String as a hexadecimal number. - The format of the input Unicode string String is: - - [spaces][zeros][x][hexadecimal digits]. - - The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F]. - The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix. - If "x" appears in the input string, it must be prefixed with at least one 0. - The function will ignore the pad space, which includes spaces or tab characters, - before [zeros], [x] or [hexadecimal digit]. The running zero before [x] or - [hexadecimal digit] will be ignored. Then, the decoding starts after [x] or the - first valid hexadecimal digit. Then, the function stops at the first character that is - a not a valid hexadecimal character or NULL, whichever one comes first. - - If String is NULL, then ASSERT(). - If String is not aligned in a 16-bit boundary, then ASSERT(). - If String has only pad spaces, then zero is returned. - If String has no leading pad spaces, leading zeros or valid hexadecimal digits, - then zero is returned. - If the number represented by String overflows according to the range defined by - UINTN, then ASSERT(). - - If PcdMaximumUnicodeStringLength is not zero, and String contains more than - PcdMaximumUnicodeStringLength Unicode characters not including the Null-terminator, - then ASSERT(). - - @param String Pointer to a Null-terminated Unicode string. - - @retval UINTN - -**/ -UINTN -EFIAPI -StrHexToUintn ( - IN CONST CHAR16 *String - ); - - -/** - Convert a Null-terminated Unicode hexadecimal string to a value of type UINT64. - - This function returns a value of type UINT64 by interpreting the contents - of the Unicode string specified by String as a hexadecimal number. - The format of the input Unicode string String is - - [spaces][zeros][x][hexadecimal digits]. - - The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F]. - The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix. - If "x" appears in the input string, it must be prefixed with at least one 0. - The function will ignore the pad space, which includes spaces or tab characters, - before [zeros], [x] or [hexadecimal digit]. The running zero before [x] or - [hexadecimal digit] will be ignored. Then, the decoding starts after [x] or the - first valid hexadecimal digit. Then, the function stops at the first character that is - a not a valid hexadecimal character or NULL, whichever one comes first. - - If String is NULL, then ASSERT(). - If String is not aligned in a 16-bit boundary, then ASSERT(). - If String has only pad spaces, then zero is returned. - If String has no leading pad spaces, leading zeros or valid hexadecimal digits, - then zero is returned. - If the number represented by String overflows according to the range defined by - UINT64, then ASSERT(). - - If PcdMaximumUnicodeStringLength is not zero, and String contains more than - PcdMaximumUnicodeStringLength Unicode characters not including the Null-terminator, - then ASSERT(). - - @param String Pointer to a Null-terminated Unicode string. - - @retval UINT64 - -**/ -UINT64 -EFIAPI -StrHexToUint64 ( - IN CONST CHAR16 *String - ); - -/** - Convert a nibble in the low 4 bits of a byte to a Unicode hexadecimal character. - - This function converts a nibble in the low 4 bits of a byte to a Unicode hexadecimal - character For example, the nibble 0x01 and 0x0A will converted to L'1' and L'A' - respectively. - - The upper nibble in the input byte will be masked off. - - @param Nibble The nibble which is in the low 4 bits of the input byte. - - @retval CHAR16 The Unicode hexadecimal character. - -**/ -CHAR16 -EFIAPI -NibbleToHexChar ( - IN UINT8 Nibble - ) -; - -/** - Convert binary buffer to a Unicode String in a specified sequence. - - This function converts bytes in the binary Buffer Buf to a Unicode String Str. - Each byte will be represented by two Unicode characters. For example, byte 0xA1 will - be converted into two Unicode character L'A' and L'1'. In the output String, the Unicode Character - for the Most Significant Nibble will be put before the Unicode Character for the Least Significant - Nibble. The output string for the buffer containing a single byte 0xA1 will be L"A1". - For a buffer with multiple bytes, the Unicode character produced by the first byte will be put into the - the last character in the output string. The one next to first byte will be put into the - character before the last character. This rules applies to the rest of the bytes. The Unicode - character by the last byte will be put into the first character in the output string. For example, - the input buffer for a 64-bits unsigned integrer 0x12345678abcdef1234 will be converted to - a Unicode string equal to L"12345678abcdef1234". - - @param String On input, String is pointed to the buffer allocated for the convertion. - @param StringLen The Length of String buffer to hold the output String. The length must include the tailing '\0' character. - The StringLen required to convert a N bytes Buffer will be a least equal to or greater - than 2*N + 1. - @param Buffer The pointer to a input buffer. - @param BufferSizeInBytes Lenth in bytes of the input buffer. - - - @retval EFI_SUCCESS The convertion is successfull. All bytes in Buffer has been convert to the corresponding - Unicode character and placed into the right place in String. - @retval EFI_BUFFER_TOO_SMALL StringSizeInBytes is smaller than 2 * N + 1the number of bytes required to - complete the convertion. -**/ -RETURN_STATUS -EFIAPI -BufToHexString ( - IN OUT CHAR16 *String, - IN OUT UINTN *StringLen, - IN CONST UINT8 *Buffer, - IN UINTN BufferSizeInBytes - ) -; - - -/** - Convert a Unicode string consisting of hexadecimal characters to a output byte buffer. - - This function converts a Unicode string consisting of characters in the range of Hexadecimal - character (L'0' to L'9', L'A' to L'F' and L'a' to L'f') to a output byte buffer. The function will stop - at the first non-hexadecimal character or the NULL character. The convertion process can be - simply viewed as the reverse operations defined by BufToHexString. Two Unicode characters will be - converted into one byte. The first Unicode character represents the Most Significant Nibble and the - second Unicode character represents the Least Significant Nibble in the output byte. - The first pair of Unicode characters represents the last byte in the output buffer. The second pair of Unicode - characters represent the the byte preceding the last byte. This rule applies to the rest pairs of bytes. - The last pair represent the first byte in the output buffer. - - For example, a Unciode String L"12345678" will be converted into a buffer wil the following bytes - (first byte is the byte in the lowest memory address): "0x78, 0x56, 0x34, 0x12". - - If String has N valid hexadecimal characters for conversion, the caller must make sure Buffer is at least - N/2 (if N is even) or (N+1)/2 (if N if odd) bytes. - - @param Buffer The output buffer allocated by the caller. - @param BufferSizeInBytes On input, the size in bytes of Buffer. On output, it is updated to - contain the size of the Buffer which is actually used for the converstion. - For Unicode string with 2*N hexadecimal characters (not including the - tailing NULL character), N bytes of Buffer will be used for the output. - @param String The input hexadecimal string. - @param ConvertedStrLen The number of hexadecimal characters used to produce content in output - buffer Buffer. - - @retval RETURN_BUFFER_TOO_SMALL The input BufferSizeInBytes is too small to hold the output. BufferSizeInBytes - will be updated to the size required for the converstion. - @retval RETURN_SUCCESS The convertion is successful or the first Unicode character from String - is hexadecimal. If ConvertedStrLen is not NULL, it is updated - to the number of hexadecimal character used for the converstion. -**/ -RETURN_STATUS -EFIAPI -HexStringToBuf ( - OUT UINT8 *Buffer, - IN OUT UINTN *BufferSizeInBytes, - IN CONST CHAR16 *String, - OUT UINTN *ConvertedStrLen OPTIONAL - ) -; - - -/** - Test if a Unicode character is a hexadecimal digit. If true, the input - Unicode character is converted to a byte. - - This function tests if a Unicode character is a hexadecimal digit. If true, the input - Unicode character is converted to a byte. For example, Unicode character - L'A' will be converted to 0x0A. - - If Digit is NULL, then ASSERT. - - @retval TRUE Char is in the range of Hexadecimal number. Digit is updated - to the byte value of the number. - @retval FALSE Char is not in the range of Hexadecimal number. Digit is keep - intact. - -**/ -BOOLEAN -EFIAPI -IsHexDigit ( - OUT UINT8 *Digit, - IN CHAR16 Char - ) -; - -/** - Convert one Null-terminated Unicode string to a Null-terminated - ASCII string and returns the ASCII string. - - This function converts the content of the Unicode string Source - to the ASCII string Destination by copying the lower 8 bits of - each Unicode character. It returns Destination. - - If any Unicode characters in Source contain non-zero value in - the upper 8 bits, then ASSERT(). - - If Destination is NULL, then ASSERT(). - If Source is NULL, then ASSERT(). - If Source is not aligned on a 16-bit boundary, then ASSERT(). - If Source and Destination overlap, then ASSERT(). - - If PcdMaximumUnicodeStringLength is not zero, and Source contains - more than PcdMaximumUnicodeStringLength Unicode characters not including - the Null-terminator, then ASSERT(). - - If PcdMaximumAsciiStringLength is not zero, and Source contains more - than PcdMaximumAsciiStringLength Unicode characters not including the - Null-terminator, then ASSERT(). - - @param Source Pointer to a Null-terminated Unicode string. - @param Destination Pointer to a Null-terminated ASCII string. - - @return Destination - -**/ -CHAR8 * -EFIAPI -UnicodeStrToAsciiStr ( - IN CONST CHAR16 *Source, - OUT CHAR8 *Destination - ); - - -/** - Copies one Null-terminated ASCII string to another Null-terminated ASCII - string and returns the new ASCII string. - - This function copies the contents of the ASCII string Source to the ASCII - string Destination, and returns Destination. If Source and Destination - overlap, then the results are undefined. - - If Destination is NULL, then ASSERT(). - If Source is NULL, then ASSERT(). - If Source and Destination overlap, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and Source contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - - @param Destination Pointer to a Null-terminated ASCII string. - @param Source Pointer to a Null-terminated ASCII string. - - @return Destination - -**/ -CHAR8 * -EFIAPI -AsciiStrCpy ( - OUT CHAR8 *Destination, - IN CONST CHAR8 *Source - ); - - -/** - Copies one Null-terminated ASCII string with a maximum length to another - Null-terminated ASCII string with a maximum length and returns the new ASCII - string. - - This function copies the contents of the ASCII string Source to the ASCII - string Destination, and returns Destination. At most, Length ASCII characters - are copied from Source to Destination. If Length is 0, then Destination is - returned unmodified. If Length is greater that the number of ASCII characters - in Source, then Destination is padded with Null ASCII characters. If Source - and Destination overlap, then the results are undefined. - - If Destination is NULL, then ASSERT(). - If Source is NULL, then ASSERT(). - If Source and Destination overlap, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero, and Source contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - - @param Destination Pointer to a Null-terminated ASCII string. - @param Source Pointer to a Null-terminated ASCII string. - @param Length Maximum number of ASCII characters to copy. - - @return Destination - -**/ -CHAR8 * -EFIAPI -AsciiStrnCpy ( - OUT CHAR8 *Destination, - IN CONST CHAR8 *Source, - IN UINTN Length - ); - - -/** - Returns the length of a Null-terminated ASCII string. - - This function returns the number of ASCII characters in the Null-terminated - ASCII string specified by String. - - If Length > 0 and Destination is NULL, then ASSERT(). - If Length > 0 and Source is NULL, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and String contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - - @param String Pointer to a Null-terminated ASCII string. - - @return The length of String. - -**/ -UINTN -EFIAPI -AsciiStrLen ( - IN CONST CHAR8 *String - ); - - -/** - Returns the size of a Null-terminated ASCII string in bytes, including the - Null terminator. - - This function returns the size, in bytes, of the Null-terminated ASCII string - specified by String. - - If String is NULL, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and String contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - - @param String Pointer to a Null-terminated ASCII string. - - @return The size of String. - -**/ -UINTN -EFIAPI -AsciiStrSize ( - IN CONST CHAR8 *String - ); - - -/** - Compares two Null-terminated ASCII strings, and returns the difference - between the first mismatched ASCII characters. - - This function compares the Null-terminated ASCII string FirstString to the - Null-terminated ASCII string SecondString. If FirstString is identical to - SecondString, then 0 is returned. Otherwise, the value returned is the first - mismatched ASCII character in SecondString subtracted from the first - mismatched ASCII character in FirstString. - - If FirstString is NULL, then ASSERT(). - If SecondString is NULL, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and FirstString contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and SecondString contains more - than PcdMaximumAsciiStringLength ASCII characters not including the - Null-terminator, then ASSERT(). - - @param FirstString Pointer to a Null-terminated ASCII string. - @param SecondString Pointer to a Null-terminated ASCII string. - - @retval 0 FirstString is identical to SecondString. - @retval !=0 FirstString is not identical to SecondString. - -**/ -INTN -EFIAPI -AsciiStrCmp ( - IN CONST CHAR8 *FirstString, - IN CONST CHAR8 *SecondString - ); - - -/** - Performs a case insensitive comparison of two Null-terminated ASCII strings, - and returns the difference between the first mismatched ASCII characters. - - This function performs a case insensitive comparison of the Null-terminated - ASCII string FirstString to the Null-terminated ASCII string SecondString. If - FirstString is identical to SecondString, then 0 is returned. Otherwise, the - value returned is the first mismatched lower case ASCII character in - SecondString subtracted from the first mismatched lower case ASCII character - in FirstString. - - If FirstString is NULL, then ASSERT(). - If SecondString is NULL, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and FirstString contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and SecondString contains more - than PcdMaximumAsciiStringLength ASCII characters not including the - Null-terminator, then ASSERT(). - - @param FirstString Pointer to a Null-terminated ASCII string. - @param SecondString Pointer to a Null-terminated ASCII string. - - @retval 0 FirstString is identical to SecondString using case insensitive - comparisons. - @retval !=0 FirstString is not identical to SecondString using case - insensitive comparisons. - -**/ -INTN -EFIAPI -AsciiStriCmp ( - IN CONST CHAR8 *FirstString, - IN CONST CHAR8 *SecondString - ); - - -/** - Compares two Null-terminated ASCII strings with maximum lengths, and returns - the difference between the first mismatched ASCII characters. - - This function compares the Null-terminated ASCII string FirstString to the - Null-terminated ASCII string SecondString. At most, Length ASCII characters - will be compared. If Length is 0, then 0 is returned. If FirstString is - identical to SecondString, then 0 is returned. Otherwise, the value returned - is the first mismatched ASCII character in SecondString subtracted from the - first mismatched ASCII character in FirstString. - - If Length > 0 and FirstString is NULL, then ASSERT(). - If Length > 0 and SecondString is NULL, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and FirstString contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and SecondString contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - - @param FirstString Pointer to a Null-terminated ASCII string. - @param SecondString Pointer to a Null-terminated ASCII string. - @param Length Maximum number of ASCII characters for compare. - - @retval 0 FirstString is identical to SecondString. - @retval !=0 FirstString is not identical to SecondString. - -**/ -INTN -EFIAPI -AsciiStrnCmp ( - IN CONST CHAR8 *FirstString, - IN CONST CHAR8 *SecondString, - IN UINTN Length - ); - - -/** - Concatenates one Null-terminated ASCII string to another Null-terminated - ASCII string, and returns the concatenated ASCII string. - - This function concatenates two Null-terminated ASCII strings. The contents of - Null-terminated ASCII string Source are concatenated to the end of Null- - terminated ASCII string Destination. The Null-terminated concatenated ASCII - String is returned. - - If Destination is NULL, then ASSERT(). - If Source is NULL, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and Destination contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and Source contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - If PcdMaximumAsciiStringLength is not zero and concatenating Destination and - Source results in a ASCII string with more than PcdMaximumAsciiStringLength - ASCII characters, then ASSERT(). - - @param Destination Pointer to a Null-terminated ASCII string. - @param Source Pointer to a Null-terminated ASCII string. - - @return Destination - -**/ -CHAR8 * -EFIAPI -AsciiStrCat ( - IN OUT CHAR8 *Destination, - IN CONST CHAR8 *Source - ); - - -/** - Concatenates one Null-terminated ASCII string with a maximum length to the - end of another Null-terminated ASCII string, and returns the concatenated - ASCII string. - - This function concatenates two Null-terminated ASCII strings. The contents - of Null-terminated ASCII string Source are concatenated to the end of Null- - terminated ASCII string Destination, and Destination is returned. At most, - Length ASCII characters are concatenated from Source to the end of - Destination, and Destination is always Null-terminated. If Length is 0, then - Destination is returned unmodified. If Source and Destination overlap, then - the results are undefined. - - If Length > 0 and Destination is NULL, then ASSERT(). - If Length > 0 and Source is NULL, then ASSERT(). - If Source and Destination overlap, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero, and Destination contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - If PcdMaximumAsciiStringLength is not zero, and Source contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - If PcdMaximumAsciiStringLength is not zero, and concatenating Destination and - Source results in a ASCII string with more than PcdMaximumAsciiStringLength - ASCII characters not including the Null-terminator, then ASSERT(). - - @param Destination Pointer to a Null-terminated ASCII string. - @param Source Pointer to a Null-terminated ASCII string. - @param Length Maximum number of ASCII characters to concatenate from - Source. - - @return Destination - -**/ -CHAR8 * -EFIAPI -AsciiStrnCat ( - IN OUT CHAR8 *Destination, - IN CONST CHAR8 *Source, - IN UINTN Length - ); - - -/** - Returns the first occurance of a Null-terminated ASCII sub-string - in a Null-terminated ASCII string. - - This function scans the contents of the ASCII string specified by String - and returns the first occurrence of SearchString. If SearchString is not - found in String, then NULL is returned. If the length of SearchString is zero, - then String is returned. - - If String is NULL, then ASSERT(). - If SearchString is NULL, then ASSERT(). - - If PcdMaximumAsciiStringLength is not zero, and SearchString or - String contains more than PcdMaximumAsciiStringLength Unicode characters - not including the Null-terminator, then ASSERT(). - - @param String Pointer to a Null-terminated ASCII string. - @param SearchString Pointer to a Null-terminated ASCII string to search for. - - @retval NULL If the SearchString does not appear in String. - @retval !NULL If there is a match. - -**/ -CHAR8 * -EFIAPI -AsciiStrStr ( - IN CONST CHAR8 *String, - IN CONST CHAR8 *SearchString - ); - - -/** - Convert a Null-terminated ASCII decimal string to a value of type - UINTN. - - This function returns a value of type UINTN by interpreting the contents - of the ASCII string String as a decimal number. The format of the input - ASCII string String is: - - [spaces] [decimal digits]. - - The valid decimal digit character is in the range [0-9]. The function will - ignore the pad space, which includes spaces or tab characters, before the digits. - The running zero in the beginning of [decimal digits] will be ignored. Then, the - function stops at the first character that is a not a valid decimal character or - Null-terminator, whichever on comes first. - - If String has only pad spaces, then 0 is returned. - If String has no pad spaces or valid decimal digits, then 0 is returned. - If the number represented by String overflows according to the range defined by - UINTN, then ASSERT(). - If String is NULL, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero, and String contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - - @param String Pointer to a Null-terminated ASCII string. - - @retval UINTN - -**/ -UINTN -EFIAPI -AsciiStrDecimalToUintn ( - IN CONST CHAR8 *String - ); - - -/** - Convert a Null-terminated ASCII decimal string to a value of type - UINT64. - - This function returns a value of type UINT64 by interpreting the contents - of the ASCII string String as a decimal number. The format of the input - ASCII string String is: - - [spaces] [decimal digits]. - - The valid decimal digit character is in the range [0-9]. The function will - ignore the pad space, which includes spaces or tab characters, before the digits. - The running zero in the beginning of [decimal digits] will be ignored. Then, the - function stops at the first character that is a not a valid decimal character or - Null-terminator, whichever on comes first. - - If String has only pad spaces, then 0 is returned. - If String has no pad spaces or valid decimal digits, then 0 is returned. - If the number represented by String overflows according to the range defined by - UINT64, then ASSERT(). - If String is NULL, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero, and String contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - - @param String Pointer to a Null-terminated ASCII string. - - @retval UINT64 - -**/ -UINT64 -EFIAPI -AsciiStrDecimalToUint64 ( - IN CONST CHAR8 *String - ); - - -/** - Convert a Null-terminated ASCII hexadecimal string to a value of type UINTN. - - This function returns a value of type UINTN by interpreting the contents of - the ASCII string String as a hexadecimal number. The format of the input ASCII - string String is: - - [spaces][zeros][x][hexadecimal digits]. - - The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F]. - The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix. If "x" - appears in the input string, it must be prefixed with at least one 0. The function - will ignore the pad space, which includes spaces or tab characters, before [zeros], - [x] or [hexadecimal digits]. The running zero before [x] or [hexadecimal digits] - will be ignored. Then, the decoding starts after [x] or the first valid hexadecimal - digit. Then, the function stops at the first character that is a not a valid - hexadecimal character or Null-terminator, whichever on comes first. - - If String has only pad spaces, then 0 is returned. - If String has no leading pad spaces, leading zeros or valid hexadecimal digits, then - 0 is returned. - - If the number represented by String overflows according to the range defined by UINTN, - then ASSERT(). - If String is NULL, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero, - and String contains more than PcdMaximumAsciiStringLength ASCII characters not including - the Null-terminator, then ASSERT(). - - @param String Pointer to a Null-terminated ASCII string. - - @retval UINTN - -**/ -UINTN -EFIAPI -AsciiStrHexToUintn ( - IN CONST CHAR8 *String - ); - - -/** - Convert a Null-terminated ASCII hexadecimal string to a value of type UINT64. - - This function returns a value of type UINT64 by interpreting the contents of - the ASCII string String as a hexadecimal number. The format of the input ASCII - string String is: - - [spaces][zeros][x][hexadecimal digits]. - - The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F]. - The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix. If "x" - appears in the input string, it must be prefixed with at least one 0. The function - will ignore the pad space, which includes spaces or tab characters, before [zeros], - [x] or [hexadecimal digits]. The running zero before [x] or [hexadecimal digits] - will be ignored. Then, the decoding starts after [x] or the first valid hexadecimal - digit. Then, the function stops at the first character that is a not a valid - hexadecimal character or Null-terminator, whichever on comes first. - - If String has only pad spaces, then 0 is returned. - If String has no leading pad spaces, leading zeros or valid hexadecimal digits, then - 0 is returned. - - If the number represented by String overflows according to the range defined by UINT64, - then ASSERT(). - If String is NULL, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero, - and String contains more than PcdMaximumAsciiStringLength ASCII characters not including - the Null-terminator, then ASSERT(). - - @param String Pointer to a Null-terminated ASCII string. - - @retval UINT64 - -**/ -UINT64 -EFIAPI -AsciiStrHexToUint64 ( - IN CONST CHAR8 *String - ); - - -/** - Convert one Null-terminated ASCII string to a Null-terminated - Unicode string and returns the Unicode string. - - This function converts the contents of the ASCII string Source to the Unicode - string Destination, and returns Destination. The function terminates the - Unicode string Destination by appending a Null-terminator character at the end. - The caller is responsible to make sure Destination points to a buffer with size - equal or greater than ((AsciiStrLen (Source) + 1) * sizeof (CHAR16)) in bytes. - - If Destination is NULL, then ASSERT(). - If Destination is not aligned on a 16-bit boundary, then ASSERT(). - If Source is NULL, then ASSERT(). - If Source and Destination overlap, then ASSERT(). - If PcdMaximumAsciiStringLength is not zero, and Source contains more than - PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, - then ASSERT(). - If PcdMaximumUnicodeStringLength is not zero, and Source contains more than - PcdMaximumUnicodeStringLength ASCII characters not including the - Null-terminator, then ASSERT(). - - @param Source Pointer to a Null-terminated ASCII string. - @param Destination Pointer to a Null-terminated Unicode string. - - @return Destination - -**/ -CHAR16 * -EFIAPI -AsciiStrToUnicodeStr ( - IN CONST CHAR8 *Source, - OUT CHAR16 *Destination - ); - - -/** - Converts an 8-bit value to an 8-bit BCD value. - - Converts the 8-bit value specified by Value to BCD. The BCD value is - returned. - - If Value >= 100, then ASSERT(). - - @param Value The 8-bit value to convert to BCD. Range 0..99. - - @return The BCD value - -**/ -UINT8 -EFIAPI -DecimalToBcd8 ( - IN UINT8 Value - ); - - -/** - Converts an 8-bit BCD value to an 8-bit value. - - Converts the 8-bit BCD value specified by Value to an 8-bit value. The 8-bit - value is returned. - - If Value >= 0xA0, then ASSERT(). - If (Value & 0x0F) >= 0x0A, then ASSERT(). - - @param Value The 8-bit BCD value to convert to an 8-bit value. - - @return The 8-bit value is returned. - -**/ -UINT8 -EFIAPI -BcdToDecimal8 ( - IN UINT8 Value - ); - - -// -// Linked List Functions and Macros -// - -/** - Initializes the head node of a doubly linked list that is declared as a - global variable in a module. - - Initializes the forward and backward links of a new linked list. After - initializing a linked list with this macro, the other linked list functions - may be used to add and remove nodes from the linked list. This macro results - in smaller executables by initializing the linked list in the data section, - instead if calling the InitializeListHead() function to perform the - equivalent operation. - - @param ListHead The head note of a list to initiailize. - -**/ -#define INITIALIZE_LIST_HEAD_VARIABLE(ListHead) {&ListHead, &ListHead} - - -/** - Initializes the head node of a doubly linked list, and returns the pointer to - the head node of the doubly linked list. - - Initializes the forward and backward links of a new linked list. After - initializing a linked list with this function, the other linked list - functions may be used to add and remove nodes from the linked list. It is up - to the caller of this function to allocate the memory for ListHead. - - If ListHead is NULL, then ASSERT(). - - @param ListHead A pointer to the head node of a new doubly linked list. - - @return ListHead - -**/ -LIST_ENTRY * -EFIAPI -InitializeListHead ( - IN LIST_ENTRY *ListHead - ); - - -/** - Adds a node to the beginning of a doubly linked list, and returns the pointer - to the head node of the doubly linked list. - - Adds the node Entry at the beginning of the doubly linked list denoted by - ListHead, and returns ListHead. - - If ListHead is NULL, then ASSERT(). - If Entry is NULL, then ASSERT(). - If ListHead was not initialized with InitializeListHead(), then ASSERT(). - If PcdMaximumLinkedListLenth is not zero, and prior to insertion the number - of nodes in ListHead, including the ListHead node, is greater than or - equal to PcdMaximumLinkedListLength, then ASSERT(). - - @param ListHead A pointer to the head node of a doubly linked list. - @param Entry A pointer to a node that is to be inserted at the beginning - of a doubly linked list. - - @return ListHead - -**/ -LIST_ENTRY * -EFIAPI -InsertHeadList ( - IN LIST_ENTRY *ListHead, - IN LIST_ENTRY *Entry - ); - - -/** - Adds a node to the end of a doubly linked list, and returns the pointer to - the head node of the doubly linked list. - - Adds the node Entry to the end of the doubly linked list denoted by ListHead, - and returns ListHead. - - If ListHead is NULL, then ASSERT(). - If Entry is NULL, then ASSERT(). - If ListHead was not initialized with InitializeListHead(), then ASSERT(). - If PcdMaximumLinkedListLenth is not zero, and prior to insertion the number - of nodes in ListHead, including the ListHead node, is greater than or - equal to PcdMaximumLinkedListLength, then ASSERT(). - - @param ListHead A pointer to the head node of a doubly linked list. - @param Entry A pointer to a node that is to be added at the end of the - doubly linked list. - - @return ListHead - -**/ -LIST_ENTRY * -EFIAPI -InsertTailList ( - IN LIST_ENTRY *ListHead, - IN LIST_ENTRY *Entry - ); - - -/** - Retrieves the first node of a doubly linked list. - - Returns the first node of a doubly linked list. List must have been - initialized with InitializeListHead(). If List is empty, then NULL is - returned. - - If List is NULL, then ASSERT(). - If List was not initialized with InitializeListHead(), then ASSERT(). - If PcdMaximumLinkedListLenth is not zero, and the number of nodes - in List, including the List node, is greater than or equal to - PcdMaximumLinkedListLength, then ASSERT(). - - @param List A pointer to the head node of a doubly linked list. - - @return The first node of a doubly linked list. - @retval NULL The list is empty. - -**/ -LIST_ENTRY * -EFIAPI -GetFirstNode ( - IN CONST LIST_ENTRY *List - ); - - -/** - Retrieves the next node of a doubly linked list. - - Returns the node of a doubly linked list that follows Node. List must have - been initialized with InitializeListHead(). If List is empty, then List is - returned. - - If List is NULL, then ASSERT(). - If Node is NULL, then ASSERT(). - If List was not initialized with InitializeListHead(), then ASSERT(). - If PcdMaximumLinkedListLenth is not zero, and List contains more than - PcdMaximumLinkedListLenth nodes, then ASSERT(). - If Node is not a node in List, then ASSERT(). - - @param List A pointer to the head node of a doubly linked list. - @param Node A pointer to a node in the doubly linked list. - - @return Pointer to the next node if one exists. Otherwise a null value which - is actually List is returned. - -**/ -LIST_ENTRY * -EFIAPI -GetNextNode ( - IN CONST LIST_ENTRY *List, - IN CONST LIST_ENTRY *Node - ); - - -/** - Checks to see if a doubly linked list is empty or not. - - Checks to see if the doubly linked list is empty. If the linked list contains - zero nodes, this function returns TRUE. Otherwise, it returns FALSE. - - If ListHead is NULL, then ASSERT(). - If ListHead was not initialized with InitializeListHead(), then ASSERT(). - If PcdMaximumLinkedListLenth is not zero, and the number of nodes - in List, including the List node, is greater than or equal to - PcdMaximumLinkedListLength, then ASSERT(). - - @param ListHead A pointer to the head node of a doubly linked list. - - @retval TRUE The linked list is empty. - @retval FALSE The linked list is not empty. - -**/ -BOOLEAN -EFIAPI -IsListEmpty ( - IN CONST LIST_ENTRY *ListHead - ); - - -/** - Determines if a node in a doubly linked list is null. - - Returns FALSE if Node is one of the nodes in the doubly linked list specified - by List. Otherwise, TRUE is returned. List must have been initialized with - InitializeListHead(). - - If List is NULL, then ASSERT(). - If Node is NULL, then ASSERT(). - If List was not initialized with InitializeListHead(), then ASSERT(). - If PcdMaximumLinkedListLenth is not zero, and the number of nodes - in List, including the List node, is greater than or equal to - PcdMaximumLinkedListLength, then ASSERT(). - If Node is not a node in List and Node is not equal to List, then ASSERT(). - - @param List A pointer to the head node of a doubly linked list. - @param Node A pointer to a node in the doubly linked list. - - @retval TRUE Node is one of the nodes in the doubly linked list. - @retval FALSE Node is not one of the nodes in the doubly linked list. - -**/ -BOOLEAN -EFIAPI -IsNull ( - IN CONST LIST_ENTRY *List, - IN CONST LIST_ENTRY *Node - ); - - -/** - Determines if a node the last node in a doubly linked list. - - Returns TRUE if Node is the last node in the doubly linked list specified by - List. Otherwise, FALSE is returned. List must have been initialized with - InitializeListHead(). - - If List is NULL, then ASSERT(). - If Node is NULL, then ASSERT(). - If List was not initialized with InitializeListHead(), then ASSERT(). - If PcdMaximumLinkedListLenth is not zero, and the number of nodes - in List, including the List node, is greater than or equal to - PcdMaximumLinkedListLength, then ASSERT(). - If Node is not a node in List, then ASSERT(). - - @param List A pointer to the head node of a doubly linked list. - @param Node A pointer to a node in the doubly linked list. - - @retval TRUE Node is the last node in the linked list. - @retval FALSE Node is not the last node in the linked list. - -**/ -BOOLEAN -EFIAPI -IsNodeAtEnd ( - IN CONST LIST_ENTRY *List, - IN CONST LIST_ENTRY *Node - ); - - -/** - Swaps the location of two nodes in a doubly linked list, and returns the - first node after the swap. - - If FirstEntry is identical to SecondEntry, then SecondEntry is returned. - Otherwise, the location of the FirstEntry node is swapped with the location - of the SecondEntry node in a doubly linked list. SecondEntry must be in the - same double linked list as FirstEntry and that double linked list must have - been initialized with InitializeListHead(). SecondEntry is returned after the - nodes are swapped. - - If FirstEntry is NULL, then ASSERT(). - If SecondEntry is NULL, then ASSERT(). - If SecondEntry and FirstEntry are not in the same linked list, then ASSERT(). - If PcdMaximumLinkedListLength is not zero, and the number of nodes in the - linked list containing the FirstEntry and SecondEntry nodes, including - the FirstEntry and SecondEntry nodes, is greater than or equal to - PcdMaximumLinkedListLength, then ASSERT(). - - @param FirstEntry A pointer to a node in a linked list. - @param SecondEntry A pointer to another node in the same linked list. - -**/ -LIST_ENTRY * -EFIAPI -SwapListEntries ( - IN LIST_ENTRY *FirstEntry, - IN LIST_ENTRY *SecondEntry - ); - - -/** - Removes a node from a doubly linked list, and returns the node that follows - the removed node. - - Removes the node Entry from a doubly linked list. It is up to the caller of - this function to release the memory used by this node if that is required. On - exit, the node following Entry in the doubly linked list is returned. If - Entry is the only node in the linked list, then the head node of the linked - list is returned. - - If Entry is NULL, then ASSERT(). - If Entry is the head node of an empty list, then ASSERT(). - If PcdMaximumLinkedListLength is not zero, and the number of nodes in the - linked list containing Entry, including the Entry node, is greater than - or equal to PcdMaximumLinkedListLength, then ASSERT(). - - @param Entry A pointer to a node in a linked list - - @return Entry - -**/ -LIST_ENTRY * -EFIAPI -RemoveEntryList ( - IN CONST LIST_ENTRY *Entry - ); - -// -// Math Services -// - -/** - Shifts a 64-bit integer left between 0 and 63 bits. The low bits are filled - with zeros. The shifted value is returned. - - This function shifts the 64-bit value Operand to the left by Count bits. The - low Count bits are set to zero. The shifted value is returned. - - If Count is greater than 63, then ASSERT(). - - @param Operand The 64-bit operand to shift left. - @param Count The number of bits to shift left. - - @return Operand << Count - -**/ -UINT64 -EFIAPI -LShiftU64 ( - IN UINT64 Operand, - IN UINTN Count - ); - - -/** - Shifts a 64-bit integer right between 0 and 63 bits. This high bits are - filled with zeros. The shifted value is returned. - - This function shifts the 64-bit value Operand to the right by Count bits. The - high Count bits are set to zero. The shifted value is returned. - - If Count is greater than 63, then ASSERT(). - - @param Operand The 64-bit operand to shift right. - @param Count The number of bits to shift right. - - @return Operand >> Count - -**/ -UINT64 -EFIAPI -RShiftU64 ( - IN UINT64 Operand, - IN UINTN Count - ); - - -/** - Shifts a 64-bit integer right between 0 and 63 bits. The high bits are filled - with original integer's bit 63. The shifted value is returned. - - This function shifts the 64-bit value Operand to the right by Count bits. The - high Count bits are set to bit 63 of Operand. The shifted value is returned. - - If Count is greater than 63, then ASSERT(). - - @param Operand The 64-bit operand to shift right. - @param Count The number of bits to shift right. - - @return Operand >> Count - -**/ -UINT64 -EFIAPI -ARShiftU64 ( - IN UINT64 Operand, - IN UINTN Count - ); - - -/** - Rotates a 32-bit integer left between 0 and 31 bits, filling the low bits - with the high bits that were rotated. - - This function rotates the 32-bit value Operand to the left by Count bits. The - low Count bits are fill with the high Count bits of Operand. The rotated - value is returned. - - If Count is greater than 31, then ASSERT(). - - @param Operand The 32-bit operand to rotate left. - @param Count The number of bits to rotate left. - - @return Operand <<< Count - -**/ -UINT32 -EFIAPI -LRotU32 ( - IN UINT32 Operand, - IN UINTN Count - ); - - -/** - Rotates a 32-bit integer right between 0 and 31 bits, filling the high bits - with the low bits that were rotated. - - This function rotates the 32-bit value Operand to the right by Count bits. - The high Count bits are fill with the low Count bits of Operand. The rotated - value is returned. - - If Count is greater than 31, then ASSERT(). - - @param Operand The 32-bit operand to rotate right. - @param Count The number of bits to rotate right. - - @return Operand >>> Count - -**/ -UINT32 -EFIAPI -RRotU32 ( - IN UINT32 Operand, - IN UINTN Count - ); - - -/** - Rotates a 64-bit integer left between 0 and 63 bits, filling the low bits - with the high bits that were rotated. - - This function rotates the 64-bit value Operand to the left by Count bits. The - low Count bits are fill with the high Count bits of Operand. The rotated - value is returned. - - If Count is greater than 63, then ASSERT(). - - @param Operand The 64-bit operand to rotate left. - @param Count The number of bits to rotate left. - - @return Operand <<< Count - -**/ -UINT64 -EFIAPI -LRotU64 ( - IN UINT64 Operand, - IN UINTN Count - ); - - -/** - Rotates a 64-bit integer right between 0 and 63 bits, filling the high bits - with the high low bits that were rotated. - - This function rotates the 64-bit value Operand to the right by Count bits. - The high Count bits are fill with the low Count bits of Operand. The rotated - value is returned. - - If Count is greater than 63, then ASSERT(). - - @param Operand The 64-bit operand to rotate right. - @param Count The number of bits to rotate right. - - @return Operand >>> Count - -**/ -UINT64 -EFIAPI -RRotU64 ( - IN UINT64 Operand, - IN UINTN Count - ); - - -/** - Returns the bit position of the lowest bit set in a 32-bit value. - - This function computes the bit position of the lowest bit set in the 32-bit - value specified by Operand. If Operand is zero, then -1 is returned. - Otherwise, a value between 0 and 31 is returned. - - @param Operand The 32-bit operand to evaluate. - - @return Position of the lowest bit set in Operand if found. - @retval -1 Operand is zero. - -**/ -INTN -EFIAPI -LowBitSet32 ( - IN UINT32 Operand - ); - - -/** - Returns the bit position of the lowest bit set in a 64-bit value. - - This function computes the bit position of the lowest bit set in the 64-bit - value specified by Operand. If Operand is zero, then -1 is returned. - Otherwise, a value between 0 and 63 is returned. - - @param Operand The 64-bit operand to evaluate. - - @return Position of the lowest bit set in Operand if found. - @retval -1 Operand is zero. - -**/ -INTN -EFIAPI -LowBitSet64 ( - IN UINT64 Operand - ); - - -/** - Returns the bit position of the highest bit set in a 32-bit value. Equivalent - to log2(x). - - This function computes the bit position of the highest bit set in the 32-bit - value specified by Operand. If Operand is zero, then -1 is returned. - Otherwise, a value between 0 and 31 is returned. - - @param Operand The 32-bit operand to evaluate. - - @return Position of the highest bit set in Operand if found. - @retval -1 Operand is zero. - -**/ -INTN -EFIAPI -HighBitSet32 ( - IN UINT32 Operand - ); - - -/** - Returns the bit position of the highest bit set in a 64-bit value. Equivalent - to log2(x). - - This function computes the bit position of the highest bit set in the 64-bit - value specified by Operand. If Operand is zero, then -1 is returned. - Otherwise, a value between 0 and 63 is returned. - - @param Operand The 64-bit operand to evaluate. - - @return Position of the highest bit set in Operand if found. - @retval -1 Operand is zero. - -**/ -INTN -EFIAPI -HighBitSet64 ( - IN UINT64 Operand - ); - - -/** - Returns the value of the highest bit set in a 32-bit value. Equivalent to - 1 << HighBitSet32(x). - - This function computes the value of the highest bit set in the 32-bit value - specified by Operand. If Operand is zero, then zero is returned. - - @param Operand The 32-bit operand to evaluate. - - @return 1 << HighBitSet32(Operand) - @retval 0 Operand is zero. - -**/ -UINT32 -EFIAPI -GetPowerOfTwo32 ( - IN UINT32 Operand - ); - - -/** - Returns the value of the highest bit set in a 64-bit value. Equivalent to - 1 << HighBitSet64(x). - - This function computes the value of the highest bit set in the 64-bit value - specified by Operand. If Operand is zero, then zero is returned. - - @param Operand The 64-bit operand to evaluate. - - @return 1 << HighBitSet64(Operand) - @retval 0 Operand is zero. - -**/ -UINT64 -EFIAPI -GetPowerOfTwo64 ( - IN UINT64 Operand - ); - - -/** - Switches the endianess of a 16-bit integer. - - This function swaps the bytes in a 16-bit unsigned value to switch the value - from little endian to big endian or vice versa. The byte swapped value is - returned. - - @param Value Operand A 16-bit unsigned value. - - @return The byte swaped Operand. - -**/ -UINT16 -EFIAPI -SwapBytes16 ( - IN UINT16 Value - ); - - -/** - Switches the endianess of a 32-bit integer. - - This function swaps the bytes in a 32-bit unsigned value to switch the value - from little endian to big endian or vice versa. The byte swapped value is - returned. - - @param Value Operand A 32-bit unsigned value. - - @return The byte swaped Operand. - -**/ -UINT32 -EFIAPI -SwapBytes32 ( - IN UINT32 Value - ); - - -/** - Switches the endianess of a 64-bit integer. - - This function swaps the bytes in a 64-bit unsigned value to switch the value - from little endian to big endian or vice versa. The byte swapped value is - returned. - - @param Value Operand A 64-bit unsigned value. - - @return The byte swaped Operand. - -**/ -UINT64 -EFIAPI -SwapBytes64 ( - IN UINT64 Value - ); - - -/** - Multiples a 64-bit unsigned integer by a 32-bit unsigned integer and - generates a 64-bit unsigned result. - - This function multiples the 64-bit unsigned value Multiplicand by the 32-bit - unsigned value Multiplier and generates a 64-bit unsigned result. This 64- - bit unsigned result is returned. - - If the result overflows, then ASSERT(). - - @param Multiplicand A 64-bit unsigned value. - @param Multiplier A 32-bit unsigned value. - - @return Multiplicand * Multiplier - -**/ -UINT64 -EFIAPI -MultU64x32 ( - IN UINT64 Multiplicand, - IN UINT32 Multiplier - ); - - -/** - Multiples a 64-bit unsigned integer by a 64-bit unsigned integer and - generates a 64-bit unsigned result. - - This function multiples the 64-bit unsigned value Multiplicand by the 64-bit - unsigned value Multiplier and generates a 64-bit unsigned result. This 64- - bit unsigned result is returned. - - If the result overflows, then ASSERT(). - - @param Multiplicand A 64-bit unsigned value. - @param Multiplier A 64-bit unsigned value. - - @return Multiplicand * Multiplier - -**/ -UINT64 -EFIAPI -MultU64x64 ( - IN UINT64 Multiplicand, - IN UINT64 Multiplier - ); - - -/** - Multiples a 64-bit signed integer by a 64-bit signed integer and generates a - 64-bit signed result. - - This function multiples the 64-bit signed value Multiplicand by the 64-bit - signed value Multiplier and generates a 64-bit signed result. This 64-bit - signed result is returned. - - If the result overflows, then ASSERT(). - - @param Multiplicand A 64-bit signed value. - @param Multiplier A 64-bit signed value. - - @return Multiplicand * Multiplier - -**/ -INT64 -EFIAPI -MultS64x64 ( - IN INT64 Multiplicand, - IN INT64 Multiplier - ); - - -/** - Divides a 64-bit unsigned integer by a 32-bit unsigned integer and generates - a 64-bit unsigned result. - - This function divides the 64-bit unsigned value Dividend by the 32-bit - unsigned value Divisor and generates a 64-bit unsigned quotient. This - function returns the 64-bit unsigned quotient. - - If Divisor is 0, then ASSERT(). - - @param Dividend A 64-bit unsigned value. - @param Divisor A 32-bit unsigned value. - - @return Dividend / Divisor - -**/ -UINT64 -EFIAPI -DivU64x32 ( - IN UINT64 Dividend, - IN UINT32 Divisor - ); - - -/** - Divides a 64-bit unsigned integer by a 32-bit unsigned integer and generates - a 32-bit unsigned remainder. - - This function divides the 64-bit unsigned value Dividend by the 32-bit - unsigned value Divisor and generates a 32-bit remainder. This function - returns the 32-bit unsigned remainder. - - If Divisor is 0, then ASSERT(). - - @param Dividend A 64-bit unsigned value. - @param Divisor A 32-bit unsigned value. - - @return Dividend % Divisor - -**/ -UINT32 -EFIAPI -ModU64x32 ( - IN UINT64 Dividend, - IN UINT32 Divisor - ); - - -/** - Divides a 64-bit unsigned integer by a 32-bit unsigned integer and generates - a 64-bit unsigned result and an optional 32-bit unsigned remainder. - - This function divides the 64-bit unsigned value Dividend by the 32-bit - unsigned value Divisor and generates a 64-bit unsigned quotient. If Remainder - is not NULL, then the 32-bit unsigned remainder is returned in Remainder. - This function returns the 64-bit unsigned quotient. - - If Divisor is 0, then ASSERT(). - - @param Dividend A 64-bit unsigned value. - @param Divisor A 32-bit unsigned value. - @param Remainder A pointer to a 32-bit unsigned value. This parameter is - optional and may be NULL. - - @return Dividend / Divisor - -**/ -UINT64 -EFIAPI -DivU64x32Remainder ( - IN UINT64 Dividend, - IN UINT32 Divisor, - OUT UINT32 *Remainder OPTIONAL - ); - - -/** - Divides a 64-bit unsigned integer by a 64-bit unsigned integer and generates - a 64-bit unsigned result and an optional 64-bit unsigned remainder. - - This function divides the 64-bit unsigned value Dividend by the 64-bit - unsigned value Divisor and generates a 64-bit unsigned quotient. If Remainder - is not NULL, then the 64-bit unsigned remainder is returned in Remainder. - This function returns the 64-bit unsigned quotient. - - If Divisor is 0, then ASSERT(). - - @param Dividend A 64-bit unsigned value. - @param Divisor A 64-bit unsigned value. - @param Remainder A pointer to a 64-bit unsigned value. This parameter is - optional and may be NULL. - - @return Dividend / Divisor - -**/ -UINT64 -EFIAPI -DivU64x64Remainder ( - IN UINT64 Dividend, - IN UINT64 Divisor, - OUT UINT64 *Remainder OPTIONAL - ); - - -/** - Divides a 64-bit signed integer by a 64-bit signed integer and generates a - 64-bit signed result and a optional 64-bit signed remainder. - - This function divides the 64-bit signed value Dividend by the 64-bit signed - value Divisor and generates a 64-bit signed quotient. If Remainder is not - NULL, then the 64-bit signed remainder is returned in Remainder. This - function returns the 64-bit signed quotient. - - If Divisor is 0, then ASSERT(). - - @param Dividend A 64-bit signed value. - @param Divisor A 64-bit signed value. - @param Remainder A pointer to a 64-bit signed value. This parameter is - optional and may be NULL. - - @return Dividend / Divisor - -**/ -INT64 -EFIAPI -DivS64x64Remainder ( - IN INT64 Dividend, - IN INT64 Divisor, - OUT INT64 *Remainder OPTIONAL - ); - - -/** - Reads a 16-bit value from memory that may be unaligned. - - This function returns the 16-bit value pointed to by Buffer. The function - guarantees that the read operation does not produce an alignment fault. - - If the Buffer is NULL, then ASSERT(). - - @param Uint16 Pointer to a 16-bit value that may be unaligned. - - @return *Uint16 - -**/ -UINT16 -EFIAPI -ReadUnaligned16 ( - IN CONST UINT16 *Uint16 - ); - - -/** - Writes a 16-bit value to memory that may be unaligned. - - This function writes the 16-bit value specified by Value to Buffer. Value is - returned. The function guarantees that the write operation does not produce - an alignment fault. - - If the Buffer is NULL, then ASSERT(). - - @param Uint16 Pointer to a 16-bit value that may be unaligned. - @param Value 16-bit value to write to Buffer. - - @return Value - -**/ -UINT16 -EFIAPI -WriteUnaligned16 ( - OUT UINT16 *Uint16, - IN UINT16 Value - ); - - -/** - Reads a 24-bit value from memory that may be unaligned. - - This function returns the 24-bit value pointed to by Buffer. The function - guarantees that the read operation does not produce an alignment fault. - - If the Buffer is NULL, then ASSERT(). - - @param Buffer Pointer to a 24-bit value that may be unaligned. - - @return The value read. - -**/ -UINT32 -EFIAPI -ReadUnaligned24 ( - IN CONST UINT32 *Buffer - ); - - -/** - Writes a 24-bit value to memory that may be unaligned. - - This function writes the 24-bit value specified by Value to Buffer. Value is - returned. The function guarantees that the write operation does not produce - an alignment fault. - - If the Buffer is NULL, then ASSERT(). - - @param Buffer Pointer to a 24-bit value that may be unaligned. - @param Value 24-bit value to write to Buffer. - - @return The value written. - -**/ -UINT32 -EFIAPI -WriteUnaligned24 ( - OUT UINT32 *Buffer, - IN UINT32 Value - ); - - -/** - Reads a 32-bit value from memory that may be unaligned. - - This function returns the 32-bit value pointed to by Buffer. The function - guarantees that the read operation does not produce an alignment fault. - - If the Buffer is NULL, then ASSERT(). - - @param Uint32 Pointer to a 32-bit value that may be unaligned. - - @return *Uint32 - -**/ -UINT32 -EFIAPI -ReadUnaligned32 ( - IN CONST UINT32 *Uint32 - ); - - -/** - Writes a 32-bit value to memory that may be unaligned. - - This function writes the 32-bit value specified by Value to Buffer. Value is - returned. The function guarantees that the write operation does not produce - an alignment fault. - - If the Buffer is NULL, then ASSERT(). - - @param Uint32 Pointer to a 32-bit value that may be unaligned. - @param Value 32-bit value to write to Buffer. - - @return Value - -**/ -UINT32 -EFIAPI -WriteUnaligned32 ( - OUT UINT32 *Uint32, - IN UINT32 Value - ); - - -/** - Reads a 64-bit value from memory that may be unaligned. - - This function returns the 64-bit value pointed to by Buffer. The function - guarantees that the read operation does not produce an alignment fault. - - If the Buffer is NULL, then ASSERT(). - - @param Uint64 Pointer to a 64-bit value that may be unaligned. - - @return *Uint64 - -**/ -UINT64 -EFIAPI -ReadUnaligned64 ( - IN CONST UINT64 *Uint64 - ); - - -/** - Writes a 64-bit value to memory that may be unaligned. - - This function writes the 64-bit value specified by Value to Buffer. Value is - returned. The function guarantees that the write operation does not produce - an alignment fault. - - If the Buffer is NULL, then ASSERT(). - - @param Uint64 Pointer to a 64-bit value that may be unaligned. - @param Value 64-bit value to write to Buffer. - - @return Value - -**/ -UINT64 -EFIAPI -WriteUnaligned64 ( - OUT UINT64 *Uint64, - IN UINT64 Value - ); - - -// -// Bit Field Functions -// - -/** - Returns a bit field from an 8-bit value. - - Returns the bitfield specified by the StartBit and the EndBit from Operand. - - If 8-bit operations are not supported, then ASSERT(). - If StartBit is greater than 7, then ASSERT(). - If EndBit is greater than 7, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..7. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..7. - - @return The bit field read. - -**/ -UINT8 -EFIAPI -BitFieldRead8 ( - IN UINT8 Operand, - IN UINTN StartBit, - IN UINTN EndBit - ); - - -/** - Writes a bit field to an 8-bit value, and returns the result. - - Writes Value to the bit field specified by the StartBit and the EndBit in - Operand. All other bits in Operand are preserved. The new 8-bit value is - returned. - - If 8-bit operations are not supported, then ASSERT(). - If StartBit is greater than 7, then ASSERT(). - If EndBit is greater than 7, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..7. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..7. - @param Value New value of the bit field. - - @return The new 8-bit value. - -**/ -UINT8 -EFIAPI -BitFieldWrite8 ( - IN UINT8 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT8 Value - ); - - -/** - Reads a bit field from an 8-bit value, performs a bitwise OR, and returns the - result. - - Performs a bitwise inclusive OR between the bit field specified by StartBit - and EndBit in Operand and the value specified by OrData. All other bits in - Operand are preserved. The new 8-bit value is returned. - - If 8-bit operations are not supported, then ASSERT(). - If StartBit is greater than 7, then ASSERT(). - If EndBit is greater than 7, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..7. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..7. - @param OrData The value to OR with the read value from the value - - @return The new 8-bit value. - -**/ -UINT8 -EFIAPI -BitFieldOr8 ( - IN UINT8 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT8 OrData - ); - - -/** - Reads a bit field from an 8-bit value, performs a bitwise AND, and returns - the result. - - Performs a bitwise AND between the bit field specified by StartBit and EndBit - in Operand and the value specified by AndData. All other bits in Operand are - preserved. The new 8-bit value is returned. - - If 8-bit operations are not supported, then ASSERT(). - If StartBit is greater than 7, then ASSERT(). - If EndBit is greater than 7, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..7. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..7. - @param AndData The value to AND with the read value from the value. - - @return The new 8-bit value. - -**/ -UINT8 -EFIAPI -BitFieldAnd8 ( - IN UINT8 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT8 AndData - ); - - -/** - Reads a bit field from an 8-bit value, performs a bitwise AND followed by a - bitwise OR, and returns the result. - - Performs a bitwise AND between the bit field specified by StartBit and EndBit - in Operand and the value specified by AndData, followed by a bitwise - inclusive OR with value specified by OrData. All other bits in Operand are - preserved. The new 8-bit value is returned. - - If 8-bit operations are not supported, then ASSERT(). - If StartBit is greater than 7, then ASSERT(). - If EndBit is greater than 7, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..7. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..7. - @param AndData The value to AND with the read value from the value. - @param OrData The value to OR with the result of the AND operation. - - @return The new 8-bit value. - -**/ -UINT8 -EFIAPI -BitFieldAndThenOr8 ( - IN UINT8 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT8 AndData, - IN UINT8 OrData - ); - - -/** - Returns a bit field from a 16-bit value. - - Returns the bitfield specified by the StartBit and the EndBit from Operand. - - If 16-bit operations are not supported, then ASSERT(). - If StartBit is greater than 15, then ASSERT(). - If EndBit is greater than 15, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..15. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..15. - - @return The bit field read. - -**/ -UINT16 -EFIAPI -BitFieldRead16 ( - IN UINT16 Operand, - IN UINTN StartBit, - IN UINTN EndBit - ); - - -/** - Writes a bit field to a 16-bit value, and returns the result. - - Writes Value to the bit field specified by the StartBit and the EndBit in - Operand. All other bits in Operand are preserved. The new 16-bit value is - returned. - - If 16-bit operations are not supported, then ASSERT(). - If StartBit is greater than 15, then ASSERT(). - If EndBit is greater than 15, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..15. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..15. - @param Value New value of the bit field. - - @return The new 16-bit value. - -**/ -UINT16 -EFIAPI -BitFieldWrite16 ( - IN UINT16 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT16 Value - ); - - -/** - Reads a bit field from a 16-bit value, performs a bitwise OR, and returns the - result. - - Performs a bitwise inclusive OR between the bit field specified by StartBit - and EndBit in Operand and the value specified by OrData. All other bits in - Operand are preserved. The new 16-bit value is returned. - - If 16-bit operations are not supported, then ASSERT(). - If StartBit is greater than 15, then ASSERT(). - If EndBit is greater than 15, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..15. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..15. - @param OrData The value to OR with the read value from the value - - @return The new 16-bit value. - -**/ -UINT16 -EFIAPI -BitFieldOr16 ( - IN UINT16 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT16 OrData - ); - - -/** - Reads a bit field from a 16-bit value, performs a bitwise AND, and returns - the result. - - Performs a bitwise AND between the bit field specified by StartBit and EndBit - in Operand and the value specified by AndData. All other bits in Operand are - preserved. The new 16-bit value is returned. - - If 16-bit operations are not supported, then ASSERT(). - If StartBit is greater than 15, then ASSERT(). - If EndBit is greater than 15, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..15. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..15. - @param AndData The value to AND with the read value from the value - - @return The new 16-bit value. - -**/ -UINT16 -EFIAPI -BitFieldAnd16 ( - IN UINT16 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT16 AndData - ); - - -/** - Reads a bit field from a 16-bit value, performs a bitwise AND followed by a - bitwise OR, and returns the result. - - Performs a bitwise AND between the bit field specified by StartBit and EndBit - in Operand and the value specified by AndData, followed by a bitwise - inclusive OR with value specified by OrData. All other bits in Operand are - preserved. The new 16-bit value is returned. - - If 16-bit operations are not supported, then ASSERT(). - If StartBit is greater than 15, then ASSERT(). - If EndBit is greater than 15, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..15. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..15. - @param AndData The value to AND with the read value from the value. - @param OrData The value to OR with the result of the AND operation. - - @return The new 16-bit value. - -**/ -UINT16 -EFIAPI -BitFieldAndThenOr16 ( - IN UINT16 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT16 AndData, - IN UINT16 OrData - ); - - -/** - Returns a bit field from a 32-bit value. - - Returns the bitfield specified by the StartBit and the EndBit from Operand. - - If 32-bit operations are not supported, then ASSERT(). - If StartBit is greater than 31, then ASSERT(). - If EndBit is greater than 31, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..31. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..31. - - @return The bit field read. - -**/ -UINT32 -EFIAPI -BitFieldRead32 ( - IN UINT32 Operand, - IN UINTN StartBit, - IN UINTN EndBit - ); - - -/** - Writes a bit field to a 32-bit value, and returns the result. - - Writes Value to the bit field specified by the StartBit and the EndBit in - Operand. All other bits in Operand are preserved. The new 32-bit value is - returned. - - If 32-bit operations are not supported, then ASSERT(). - If StartBit is greater than 31, then ASSERT(). - If EndBit is greater than 31, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..31. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..31. - @param Value New value of the bit field. - - @return The new 32-bit value. - -**/ -UINT32 -EFIAPI -BitFieldWrite32 ( - IN UINT32 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT32 Value - ); - - -/** - Reads a bit field from a 32-bit value, performs a bitwise OR, and returns the - result. - - Performs a bitwise inclusive OR between the bit field specified by StartBit - and EndBit in Operand and the value specified by OrData. All other bits in - Operand are preserved. The new 32-bit value is returned. - - If 32-bit operations are not supported, then ASSERT(). - If StartBit is greater than 31, then ASSERT(). - If EndBit is greater than 31, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..31. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..31. - @param OrData The value to OR with the read value from the value - - @return The new 32-bit value. - -**/ -UINT32 -EFIAPI -BitFieldOr32 ( - IN UINT32 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT32 OrData - ); - - -/** - Reads a bit field from a 32-bit value, performs a bitwise AND, and returns - the result. - - Performs a bitwise AND between the bit field specified by StartBit and EndBit - in Operand and the value specified by AndData. All other bits in Operand are - preserved. The new 32-bit value is returned. - - If 32-bit operations are not supported, then ASSERT(). - If StartBit is greater than 31, then ASSERT(). - If EndBit is greater than 31, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..31. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..31. - @param AndData The value to AND with the read value from the value - - @return The new 32-bit value. - -**/ -UINT32 -EFIAPI -BitFieldAnd32 ( - IN UINT32 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT32 AndData - ); - - -/** - Reads a bit field from a 32-bit value, performs a bitwise AND followed by a - bitwise OR, and returns the result. - - Performs a bitwise AND between the bit field specified by StartBit and EndBit - in Operand and the value specified by AndData, followed by a bitwise - inclusive OR with value specified by OrData. All other bits in Operand are - preserved. The new 32-bit value is returned. - - If 32-bit operations are not supported, then ASSERT(). - If StartBit is greater than 31, then ASSERT(). - If EndBit is greater than 31, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..31. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..31. - @param AndData The value to AND with the read value from the value. - @param OrData The value to OR with the result of the AND operation. - - @return The new 32-bit value. - -**/ -UINT32 -EFIAPI -BitFieldAndThenOr32 ( - IN UINT32 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT32 AndData, - IN UINT32 OrData - ); - - -/** - Returns a bit field from a 64-bit value. - - Returns the bitfield specified by the StartBit and the EndBit from Operand. - - If 64-bit operations are not supported, then ASSERT(). - If StartBit is greater than 63, then ASSERT(). - If EndBit is greater than 63, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..63. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..63. - - @return The bit field read. - -**/ -UINT64 -EFIAPI -BitFieldRead64 ( - IN UINT64 Operand, - IN UINTN StartBit, - IN UINTN EndBit - ); - - -/** - Writes a bit field to a 64-bit value, and returns the result. - - Writes Value to the bit field specified by the StartBit and the EndBit in - Operand. All other bits in Operand are preserved. The new 64-bit value is - returned. - - If 64-bit operations are not supported, then ASSERT(). - If StartBit is greater than 63, then ASSERT(). - If EndBit is greater than 63, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..63. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..63. - @param Value New value of the bit field. - - @return The new 64-bit value. - -**/ -UINT64 -EFIAPI -BitFieldWrite64 ( - IN UINT64 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT64 Value - ); - - -/** - Reads a bit field from a 64-bit value, performs a bitwise OR, and returns the - result. - - Performs a bitwise inclusive OR between the bit field specified by StartBit - and EndBit in Operand and the value specified by OrData. All other bits in - Operand are preserved. The new 64-bit value is returned. - - If 64-bit operations are not supported, then ASSERT(). - If StartBit is greater than 63, then ASSERT(). - If EndBit is greater than 63, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..63. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..63. - @param OrData The value to OR with the read value from the value - - @return The new 64-bit value. - -**/ -UINT64 -EFIAPI -BitFieldOr64 ( - IN UINT64 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT64 OrData - ); - - -/** - Reads a bit field from a 64-bit value, performs a bitwise AND, and returns - the result. - - Performs a bitwise AND between the bit field specified by StartBit and EndBit - in Operand and the value specified by AndData. All other bits in Operand are - preserved. The new 64-bit value is returned. - - If 64-bit operations are not supported, then ASSERT(). - If StartBit is greater than 63, then ASSERT(). - If EndBit is greater than 63, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..63. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..63. - @param AndData The value to AND with the read value from the value - - @return The new 64-bit value. - -**/ -UINT64 -EFIAPI -BitFieldAnd64 ( - IN UINT64 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT64 AndData - ); - - -/** - Reads a bit field from a 64-bit value, performs a bitwise AND followed by a - bitwise OR, and returns the result. - - Performs a bitwise AND between the bit field specified by StartBit and EndBit - in Operand and the value specified by AndData, followed by a bitwise - inclusive OR with value specified by OrData. All other bits in Operand are - preserved. The new 64-bit value is returned. - - If 64-bit operations are not supported, then ASSERT(). - If StartBit is greater than 63, then ASSERT(). - If EndBit is greater than 63, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Operand Operand on which to perform the bitfield operation. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..63. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..63. - @param AndData The value to AND with the read value from the value. - @param OrData The value to OR with the result of the AND operation. - - @return The new 64-bit value. - -**/ -UINT64 -EFIAPI -BitFieldAndThenOr64 ( - IN UINT64 Operand, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT64 AndData, - IN UINT64 OrData - ); - - -// -// Base Library Synchronization Functions -// - -/** - Retrieves the architecture specific spin lock alignment requirements for - optimal spin lock performance. - - This function retrieves the spin lock alignment requirements for optimal - performance on a given CPU architecture. The spin lock alignment must be a - power of two and is returned by this function. If there are no alignment - requirements, then 1 must be returned. The spin lock synchronization - functions must function correctly if the spin lock size and alignment values - returned by this function are not used at all. These values are hints to the - consumers of the spin lock synchronization functions to obtain optimal spin - lock performance. - - @return The architecture specific spin lock alignment. - -**/ -UINTN -EFIAPI -GetSpinLockProperties ( - VOID - ); - - -/** - Initializes a spin lock to the released state and returns the spin lock. - - This function initializes the spin lock specified by SpinLock to the released - state, and returns SpinLock. Optimal performance can be achieved by calling - GetSpinLockProperties() to determine the size and alignment requirements for - SpinLock. - - If SpinLock is NULL, then ASSERT(). - - @param SpinLock A pointer to the spin lock to initialize to the released - state. - - @return SpinLock - -**/ -SPIN_LOCK * -EFIAPI -InitializeSpinLock ( - IN SPIN_LOCK *SpinLock - ); - - -/** - Waits until a spin lock can be placed in the acquired state. - - This function checks the state of the spin lock specified by SpinLock. If - SpinLock is in the released state, then this function places SpinLock in the - acquired state and returns SpinLock. Otherwise, this function waits - indefinitely for the spin lock to be released, and then places it in the - acquired state and returns SpinLock. All state transitions of SpinLock must - be performed using MP safe mechanisms. - - If SpinLock is NULL, then ASSERT(). - If SpinLock was not initialized with InitializeSpinLock(), then ASSERT(). - If PcdSpinLockTimeout is not zero, and SpinLock is can not be acquired in - PcdSpinLockTimeout microseconds, then ASSERT(). - - @param SpinLock A pointer to the spin lock to place in the acquired state. - - @return SpinLock - -**/ -SPIN_LOCK * -EFIAPI -AcquireSpinLock ( - IN SPIN_LOCK *SpinLock - ); - - -/** - Attempts to place a spin lock in the acquired state. - - This function checks the state of the spin lock specified by SpinLock. If - SpinLock is in the released state, then this function places SpinLock in the - acquired state and returns TRUE. Otherwise, FALSE is returned. All state - transitions of SpinLock must be performed using MP safe mechanisms. - - If SpinLock is NULL, then ASSERT(). - If SpinLock was not initialized with InitializeSpinLock(), then ASSERT(). - - @param SpinLock A pointer to the spin lock to place in the acquired state. - - @retval TRUE SpinLock was placed in the acquired state. - @retval FALSE SpinLock could not be acquired. - -**/ -BOOLEAN -EFIAPI -AcquireSpinLockOrFail ( - IN SPIN_LOCK *SpinLock - ); - - -/** - Releases a spin lock. - - This function places the spin lock specified by SpinLock in the release state - and returns SpinLock. - - If SpinLock is NULL, then ASSERT(). - If SpinLock was not initialized with InitializeSpinLock(), then ASSERT(). - - @param SpinLock A pointer to the spin lock to release. - - @return SpinLock - -**/ -SPIN_LOCK * -EFIAPI -ReleaseSpinLock ( - IN SPIN_LOCK *SpinLock - ); - - -/** - Performs an atomic increment of an 32-bit unsigned integer. - - Performs an atomic increment of the 32-bit unsigned integer specified by - Value and returns the incremented value. The increment operation must be - performed using MP safe mechanisms. The state of the return value is not - guaranteed to be MP safe. - - If Value is NULL, then ASSERT(). - - @param Value A pointer to the 32-bit value to increment. - - @return The incremented value. - -**/ -UINT32 -EFIAPI -InterlockedIncrement ( - IN UINT32 *Value - ); - - -/** - Performs an atomic decrement of an 32-bit unsigned integer. - - Performs an atomic decrement of the 32-bit unsigned integer specified by - Value and returns the decremented value. The decrement operation must be - performed using MP safe mechanisms. The state of the return value is not - guaranteed to be MP safe. - - If Value is NULL, then ASSERT(). - - @param Value A pointer to the 32-bit value to decrement. - - @return The decremented value. - -**/ -UINT32 -EFIAPI -InterlockedDecrement ( - IN UINT32 *Value - ); - - -/** - Performs an atomic compare exchange operation on a 32-bit unsigned integer. - - Performs an atomic compare exchange operation on the 32-bit unsigned integer - specified by Value. If Value is equal to CompareValue, then Value is set to - ExchangeValue and CompareValue is returned. If Value is not equal to CompareValue, - then Value is returned. The compare exchange operation must be performed using - MP safe mechanisms. - - If Value is NULL, then ASSERT(). - - @param Value A pointer to the 32-bit value for the compare exchange - operation. - @param CompareValue 32-bit value used in compare operation. - @param ExchangeValue 32-bit value used in exchange operation. - - @return The original *Value before exchange. - -**/ -UINT32 -EFIAPI -InterlockedCompareExchange32 ( - IN OUT UINT32 *Value, - IN UINT32 CompareValue, - IN UINT32 ExchangeValue - ); - - -/** - Performs an atomic compare exchange operation on a 64-bit unsigned integer. - - Performs an atomic compare exchange operation on the 64-bit unsigned integer specified - by Value. If Value is equal to CompareValue, then Value is set to ExchangeValue and - CompareValue is returned. If Value is not equal to CompareValue, then Value is returned. - The compare exchange operation must be performed using MP safe mechanisms. - - If Value is NULL, then ASSERT(). - - @param Value A pointer to the 64-bit value for the compare exchange - operation. - @param CompareValue 64-bit value used in compare operation. - @param ExchangeValue 64-bit value used in exchange operation. - - @return The original *Value before exchange. - -**/ -UINT64 -EFIAPI -InterlockedCompareExchange64 ( - IN OUT UINT64 *Value, - IN UINT64 CompareValue, - IN UINT64 ExchangeValue - ); - - -/** - Performs an atomic compare exchange operation on a pointer value. - - Performs an atomic compare exchange operation on the pointer value specified - by Value. If Value is equal to CompareValue, then Value is set to - ExchangeValue and CompareValue is returned. If Value is not equal to - CompareValue, then Value is returned. The compare exchange operation must be - performed using MP safe mechanisms. - - If Value is NULL, then ASSERT(). - - @param Value A pointer to the pointer value for the compare exchange - operation. - @param CompareValue Pointer value used in compare operation. - @param ExchangeValue Pointer value used in exchange operation. - -**/ -VOID * -EFIAPI -InterlockedCompareExchangePointer ( - IN OUT VOID **Value, - IN VOID *CompareValue, - IN VOID *ExchangeValue - ); - - -// -// Base Library Checksum Functions -// - -/** - Calculate the sum of all elements in a buffer in unit of UINT8. - During calculation, the carry bits are dropped. - - This function calculates the sum of all elements in a buffer - in unit of UINT8. The carry bits in result of addition are dropped. - The result is returned as UINT8. If Length is Zero, then Zero is - returned. - - If Buffer is NULL, then ASSERT(). - If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). - - @param Buffer Pointer to the buffer to carry out the sum operation. - @param Length The size, in bytes, of Buffer . - - @return Sum The sum of Buffer with carry bits dropped during additions. - -**/ -UINT8 -EFIAPI -CalculateSum8 ( - IN CONST UINT8 *Buffer, - IN UINTN Length - ); - - -/** - Returns the two's complement checksum of all elements in a buffer - of 8-bit values. - - This function first calculates the sum of the 8-bit values in the - buffer specified by Buffer and Length. The carry bits in the result - of addition are dropped. Then, the two's complement of the sum is - returned. If Length is 0, then 0 is returned. - - If Buffer is NULL, then ASSERT(). - If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). - - - @param Buffer Pointer to the buffer to carry out the checksum operation. - @param Length The size, in bytes, of Buffer. - - @return Checksum The 2's complement checksum of Buffer. - -**/ -UINT8 -EFIAPI -CalculateCheckSum8 ( - IN CONST UINT8 *Buffer, - IN UINTN Length - ); - - -/** - Returns the sum of all elements in a buffer of 16-bit values. During - calculation, the carry bits are dropped. - - This function calculates the sum of the 16-bit values in the buffer - specified by Buffer and Length. The carry bits in result of addition are dropped. - The 16-bit result is returned. If Length is 0, then 0 is returned. - - If Buffer is NULL, then ASSERT(). - If Buffer is not aligned on a 16-bit boundary, then ASSERT(). - If Length is not aligned on a 16-bit boundary, then ASSERT(). - If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). - - @param Buffer Pointer to the buffer to carry out the sum operation. - @param Length The size, in bytes, of Buffer. - - @return Sum The sum of Buffer with carry bits dropped during additions. - -**/ -UINT16 -EFIAPI -CalculateSum16 ( - IN CONST UINT16 *Buffer, - IN UINTN Length - ); - - -/** - Returns the two's complement checksum of all elements in a buffer of - 16-bit values. - - This function first calculates the sum of the 16-bit values in the buffer - specified by Buffer and Length. The carry bits in the result of addition - are dropped. Then, the two's complement of the sum is returned. If Length - is 0, then 0 is returned. - - If Buffer is NULL, then ASSERT(). - If Buffer is not aligned on a 16-bit boundary, then ASSERT(). - If Length is not aligned on a 16-bit boundary, then ASSERT(). - If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). - - @param Buffer Pointer to the buffer to carry out the checksum operation. - @param Length The size, in bytes, of Buffer. - - @return Checksum The 2's complement checksum of Buffer. - -**/ -UINT16 -EFIAPI -CalculateCheckSum16 ( - IN CONST UINT16 *Buffer, - IN UINTN Length - ); - - -/** - Returns the sum of all elements in a buffer of 32-bit values. During - calculation, the carry bits are dropped. - - This function calculates the sum of the 32-bit values in the buffer - specified by Buffer and Length. The carry bits in result of addition are dropped. - The 32-bit result is returned. If Length is 0, then 0 is returned. - - If Buffer is NULL, then ASSERT(). - If Buffer is not aligned on a 32-bit boundary, then ASSERT(). - If Length is not aligned on a 32-bit boundary, then ASSERT(). - If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). - - @param Buffer Pointer to the buffer to carry out the sum operation. - @param Length The size, in bytes, of Buffer. - - @return Sum The sum of Buffer with carry bits dropped during additions. - -**/ -UINT32 -EFIAPI -CalculateSum32 ( - IN CONST UINT32 *Buffer, - IN UINTN Length - ); - - -/** - Returns the two's complement checksum of all elements in a buffer of - 32-bit values. - - This function first calculates the sum of the 32-bit values in the buffer - specified by Buffer and Length. The carry bits in the result of addition - are dropped. Then, the two's complement of the sum is returned. If Length - is 0, then 0 is returned. - - If Buffer is NULL, then ASSERT(). - If Buffer is not aligned on a 32-bit boundary, then ASSERT(). - If Length is not aligned on a 32-bit boundary, then ASSERT(). - If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). - - @param Buffer Pointer to the buffer to carry out the checksum operation. - @param Length The size, in bytes, of Buffer. - - @return Checksum The 2's complement checksum of Buffer. - -**/ -UINT32 -EFIAPI -CalculateCheckSum32 ( - IN CONST UINT32 *Buffer, - IN UINTN Length - ); - - -/** - Returns the sum of all elements in a buffer of 64-bit values. During - calculation, the carry bits are dropped. - - This function calculates the sum of the 64-bit values in the buffer - specified by Buffer and Length. The carry bits in result of addition are dropped. - The 64-bit result is returned. If Length is 0, then 0 is returned. - - If Buffer is NULL, then ASSERT(). - If Buffer is not aligned on a 64-bit boundary, then ASSERT(). - If Length is not aligned on a 64-bit boundary, then ASSERT(). - If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). - - @param Buffer Pointer to the buffer to carry out the sum operation. - @param Length The size, in bytes, of Buffer. - - @return Sum The sum of Buffer with carry bits dropped during additions. - -**/ -UINT64 -EFIAPI -CalculateSum64 ( - IN CONST UINT64 *Buffer, - IN UINTN Length - ); - - -/** - Returns the two's complement checksum of all elements in a buffer of - 64-bit values. - - This function first calculates the sum of the 64-bit values in the buffer - specified by Buffer and Length. The carry bits in the result of addition - are dropped. Then, the two's complement of the sum is returned. If Length - is 0, then 0 is returned. - - If Buffer is NULL, then ASSERT(). - If Buffer is not aligned on a 64-bit boundary, then ASSERT(). - If Length is not aligned on a 64-bit boundary, then ASSERT(). - If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). - - @param Buffer Pointer to the buffer to carry out the checksum operation. - @param Length The size, in bytes, of Buffer. - - @return Checksum The 2's complement checksum of Buffer. - -**/ -UINT64 -EFIAPI -CalculateCheckSum64 ( - IN CONST UINT64 *Buffer, - IN UINTN Length - ); - - -// -// Base Library CPU Functions -// -typedef -VOID -(EFIAPI *SWITCH_STACK_ENTRY_POINT) ( - IN VOID *Context1, OPTIONAL - IN VOID *Context2 OPTIONAL - ); - - -/** - Used to serialize load and store operations. - - All loads and stores that proceed calls to this function are guaranteed to be - globally visible when this function returns. - -**/ -VOID -EFIAPI -MemoryFence ( - VOID - ); - - -/** - Saves the current CPU context that can be restored with a call to LongJump() - and returns 0. - - Saves the current CPU context in the buffer specified by JumpBuffer and - returns 0. The initial call to SetJump() must always return 0. Subsequent - calls to LongJump() cause a non-zero value to be returned by SetJump(). - - If JumpBuffer is NULL, then ASSERT(). - For IPF CPUs, if JumpBuffer is not aligned on a 16-byte boundary, then ASSERT(). - - @param JumpBuffer A pointer to CPU context buffer. - - @retval 0 Indicates a return from SetJump(). - -**/ -UINTN -EFIAPI -SetJump ( - OUT BASE_LIBRARY_JUMP_BUFFER *JumpBuffer - ); - - -/** - Restores the CPU context that was saved with SetJump(). - - Restores the CPU context from the buffer specified by JumpBuffer. This - function never returns to the caller. Instead is resumes execution based on - the state of JumpBuffer. - - If JumpBuffer is NULL, then ASSERT(). - For IPF CPUs, if JumpBuffer is not aligned on a 16-byte boundary, then ASSERT(). - If Value is 0, then ASSERT(). - - @param JumpBuffer A pointer to CPU context buffer. - @param Value The value to return when the SetJump() context is - restored and must be non-zero. - -**/ -VOID -EFIAPI -LongJump ( - IN BASE_LIBRARY_JUMP_BUFFER *JumpBuffer, - IN UINTN Value - ); - - -/** - Enables CPU interrupts. - - Enables CPU interrupts. - -**/ -VOID -EFIAPI -EnableInterrupts ( - VOID - ); - - -/** - Disables CPU interrupts. - - Disables CPU interrupts. - -**/ -VOID -EFIAPI -DisableInterrupts ( - VOID - ); - - -/** - Disables CPU interrupts and returns the interrupt state prior to the disable - operation. - - Disables CPU interrupts and returns the interrupt state prior to the disable - operation. - - @retval TRUE CPU interrupts were enabled on entry to this call. - @retval FALSE CPU interrupts were disabled on entry to this call. - -**/ -BOOLEAN -EFIAPI -SaveAndDisableInterrupts ( - VOID - ); - - -/** - Enables CPU interrupts for the smallest window required to capture any - pending interrupts. - - Enables CPU interrupts for the smallest window required to capture any - pending interrupts. - -**/ -VOID -EFIAPI -EnableDisableInterrupts ( - VOID - ); - - -/** - Retrieves the current CPU interrupt state. - - Retrieves the current CPU interrupt state. Returns TRUE is interrupts are - currently enabled. Otherwise returns FALSE. - - @retval TRUE CPU interrupts are enabled. - @retval FALSE CPU interrupts are disabled. - -**/ -BOOLEAN -EFIAPI -GetInterruptState ( - VOID - ); - - -/** - Set the current CPU interrupt state. - - Sets the current CPU interrupt state to the state specified by - InterruptState. If InterruptState is TRUE, then interrupts are enabled. If - InterruptState is FALSE, then interrupts are disabled. InterruptState is - returned. - - @param InterruptState TRUE if interrupts should enabled. FALSE if - interrupts should be disabled. - - @return InterruptState - -**/ -BOOLEAN -EFIAPI -SetInterruptState ( - IN BOOLEAN InterruptState - ); - - -/** - Requests CPU to pause for a short period of time. - - Requests CPU to pause for a short period of time. Typically used in MP - systems to prevent memory starvation while waiting for a spin lock. - -**/ -VOID -EFIAPI -CpuPause ( - VOID - ); - - -/** - Transfers control to a function starting with a new stack. - - Transfers control to the function specified by EntryPoint using the - new stack specified by NewStack and passing in the parameters specified - by Context1 and Context2. Context1 and Context2 are optional and may - be NULL. The function EntryPoint must never return. This function - supports a variable number of arguments following the NewStack parameter. - These additional arguments are ignored on IA-32, x64, and EBC. - IPF CPUs expect one additional parameter of type VOID * that specifies - the new backing store pointer. - - If EntryPoint is NULL, then ASSERT(). - If NewStack is NULL, then ASSERT(). - - @param EntryPoint A pointer to function to call with the new stack. - @param Context1 A pointer to the context to pass into the EntryPoint - function. - @param Context2 A pointer to the context to pass into the EntryPoint - function. - @param NewStack A pointer to the new stack to use for the EntryPoint - function. - -**/ -VOID -EFIAPI -SwitchStack ( - IN SWITCH_STACK_ENTRY_POINT EntryPoint, - IN VOID *Context1, OPTIONAL - IN VOID *Context2, OPTIONAL - IN VOID *NewStack, - ... - ); - - -/** - Generates a breakpoint on the CPU. - - Generates a breakpoint on the CPU. The breakpoint must be implemented such - that code can resume normal execution after the breakpoint. - -**/ -VOID -EFIAPI -CpuBreakpoint ( - VOID - ); - - -/** - Executes an infinite loop. - - Forces the CPU to execute an infinite loop. A debugger may be used to skip - past the loop and the code that follows the loop must execute properly. This - implies that the infinite loop must not cause the code that follow it to be - optimized away. - -**/ -VOID -EFIAPI -CpuDeadLoop ( - VOID - ); - - -#if defined (MDE_CPU_IPF) - -/** - Flush a range of cache lines in the cache coherency domain of the calling - CPU. - - Invalidates the cache lines specified by Address and Length. If Address is - not aligned on a cache line boundary, then entire cache line containing - Address is invalidated. If Address + Length is not aligned on a cache line - boundary, then the entire instruction cache line containing Address + Length - -1 is invalidated. This function may choose to invalidate the entire - instruction cache if that is more efficient than invalidating the specified - range. If Length is 0, the no instruction cache lines are invalidated. - Address is returned. - - If Length is greater than (MAX_ADDRESS - Address + 1), then ASSERT(). - - @param Address The base address of the instruction lines to invalidate. If - the CPU is in a physical addressing mode, then Address is a - physical address. If the CPU is in a virtual addressing mode, - then Address is a virtual address. - - @param Length The number of bytes to invalidate from the instruction cache. - - @return Address - -**/ -VOID * -EFIAPI -IpfFlushCacheRange ( - IN VOID *Address, - IN UINTN Length - ); - - -/** - Executes a FC instruction - Executes a FC instruction on the cache line specified by Address. - The cache line size affected is at least 32-bytes (aligned on a 32-byte boundary). - An implementation may flush a larger region. This function is only available on IPF. - - @param Address The Address of cache line to be flushed. - - @return The address of FC instruction executed. - -**/ -UINT64 -EFIAPI -AsmFc ( - IN UINT64 Address - ); - - -/** - Executes a FC.I instruction. - Executes a FC.I instruction on the cache line specified by Address. - The cache line size affected is at least 32-bytes (aligned on a 32-byte boundary). - An implementation may flush a larger region. This function is only available on IPF. - - @param Address The Address of cache line to be flushed. - - @return The address of FC.I instruction executed. - -**/ -UINT64 -EFIAPI -AsmFci ( - IN UINT64 Address - ); - - -/** - Reads the current value of a Processor Identifier Register (CPUID). - The Index of largest implemented CPUID (One less than the number of implemented CPUID - registers) is determined by CPUID [3] bits {7:0}. - No parameter checking is performed on Index. If the Index value is beyond the - implemented CPUID register range, a Reserved Register/Field fault may occur. The caller - must either guarantee that Index is valid, or the caller must set up fault handlers to - catch the faults. This function is only available on IPF. - - @param Index The 8-bit Processor Identifier Register index to read. - - @return The current value of Processor Identifier Register specified by Index. - -**/ -UINT64 -EFIAPI -AsmReadCpuid ( - IN UINT8 Index - ); - - -/** - Reads the current value of 64-bit Processor Status Register (PSR). - This function is only available on IPF. - - @return The current value of PSR. - -**/ -UINT64 -EFIAPI -AsmReadPsr ( - VOID - ); - - -/** - Writes the current value of 64-bit Processor Status Register (PSR). - No parameter checking is performed on Value. All bits of Value corresponding to - reserved fields of PSR must be 0 or a Reserved Register/Field fault may occur. The caller must either guarantee that Value is valid, or the caller must set up fault handlers to catch the faults. - This function is only available on IPF. - - @param Value The 64-bit value to write to PSR. - - @return The 64-bit value written to the PSR. - -**/ -UINT64 -EFIAPI -AsmWritePsr ( - IN UINT64 Value - ); - - -/** - Reads the current value of 64-bit Kernel Register #0 (KR0). - This function is only available on IPF. - - @return The current value of KR0. - -**/ -UINT64 -EFIAPI -AsmReadKr0 ( - VOID - ); - - -/** - Reads the current value of 64-bit Kernel Register #1 (KR1). - This function is only available on IPF. - - @return The current value of KR1. - -**/ -UINT64 -EFIAPI -AsmReadKr1 ( - VOID - ); - - -/** - Reads the current value of 64-bit Kernel Register #2 (KR2). - This function is only available on IPF. - - @return The current value of KR2. - -**/ -UINT64 -EFIAPI -AsmReadKr2 ( - VOID - ); - - -/** - Reads the current value of 64-bit Kernel Register #3 (KR3). - This function is only available on IPF. - - @return The current value of KR3. - -**/ -UINT64 -EFIAPI -AsmReadKr3 ( - VOID - ); - - -/** - Reads the current value of 64-bit Kernel Register #4 (KR4). - This function is only available on IPF. - - @return The current value of KR4. - -**/ -UINT64 -EFIAPI -AsmReadKr4 ( - VOID - ); - - -/** - Reads the current value of 64-bit Kernel Register #5 (KR5). - This function is only available on IPF. - - @return The current value of KR5. - -**/ -UINT64 -EFIAPI -AsmReadKr5 ( - VOID - ); - - -/** - Reads the current value of 64-bit Kernel Register #6 (KR6). - This function is only available on IPF. - - @return The current value of KR6. - -**/ -UINT64 -EFIAPI -AsmReadKr6 ( - VOID - ); - - -/** - Reads the current value of 64-bit Kernel Register #7 (KR7). - This function is only available on IPF. - - @return The current value of KR7. - -**/ -UINT64 -EFIAPI -AsmReadKr7 ( - VOID - ); - - -/** - Write the current value of 64-bit Kernel Register #0 (KR0). - This function is only available on IPF. - - @param Value The 64-bit value to write to KR0. - - @return The 64-bit value written to the KR0. - -**/ -UINT64 -EFIAPI -AsmWriteKr0 ( - IN UINT64 Value - ); - - -/** - Write the current value of 64-bit Kernel Register #1 (KR1). - This function is only available on IPF. - - @param Value The 64-bit value to write to KR1. - - @return The 64-bit value written to the KR1. - -**/ -UINT64 -EFIAPI -AsmWriteKr1 ( - IN UINT64 Value - ); - - -/** - Write the current value of 64-bit Kernel Register #2 (KR2). - This function is only available on IPF. - - @param Value The 64-bit value to write to KR2. - - @return The 64-bit value written to the KR2. - -**/ -UINT64 -EFIAPI -AsmWriteKr2 ( - IN UINT64 Value - ); - - -/** - Write the current value of 64-bit Kernel Register #3 (KR3). - This function is only available on IPF. - - @param Value The 64-bit value to write to KR3. - - @return The 64-bit value written to the KR3. - -**/ -UINT64 -EFIAPI -AsmWriteKr3 ( - IN UINT64 Value - ); - - -/** - Write the current value of 64-bit Kernel Register #4 (KR4). - This function is only available on IPF. - - @param Value The 64-bit value to write to KR4. - - @return The 64-bit value written to the KR4. - -**/ -UINT64 -EFIAPI -AsmWriteKr4 ( - IN UINT64 Value - ); - - -/** - Write the current value of 64-bit Kernel Register #5 (KR5). - This function is only available on IPF. - - @param Value The 64-bit value to write to KR5. - - @return The 64-bit value written to the KR5. - -**/ -UINT64 -EFIAPI -AsmWriteKr5 ( - IN UINT64 Value - ); - - -/** - Write the current value of 64-bit Kernel Register #6 (KR6). - This function is only available on IPF. - - @param Value The 64-bit value to write to KR6. - - @return The 64-bit value written to the KR6. - -**/ -UINT64 -EFIAPI -AsmWriteKr6 ( - IN UINT64 Value - ); - - -/** - Write the current value of 64-bit Kernel Register #7 (KR7). - This function is only available on IPF. - - @param Value The 64-bit value to write to KR7. - - @return The 64-bit value written to the KR7. - -**/ -UINT64 -EFIAPI -AsmWriteKr7 ( - IN UINT64 Value - ); - - -/** - Reads the current value of Interval Timer Counter Register (ITC). - This function is only available on IPF. - - @return The current value of ITC. - -**/ -UINT64 -EFIAPI -AsmReadItc ( - VOID - ); - - -/** - Reads the current value of Interval Timer Vector Register (ITV). - This function is only available on IPF. - - @return The current value of ITV. - -**/ -UINT64 -EFIAPI -AsmReadItv ( - VOID - ); - - -/** - Reads the current value of Interval Timer Match Register (ITM). - This function is only available on IPF. - - @return The current value of ITM. -**/ -UINT64 -EFIAPI -AsmReadItm ( - VOID - ); - - -/** - Writes the current value of 64-bit Interval Timer Counter Register (ITC). - This function is only available on IPF. - - @param Value The 64-bit value to write to ITC. - - @return The 64-bit value written to the ITC. - -**/ -UINT64 -EFIAPI -AsmWriteItc ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Interval Timer Match Register (ITM). - This function is only available on IPF. - - @param Value The 64-bit value to write to ITM. - - @return The 64-bit value written to the ITM. - -**/ -UINT64 -EFIAPI -AsmWriteItm ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Interval Timer Vector Register (ITV). - No parameter checking is performed on Value. All bits of Value corresponding to - reserved fields of ITV must be 0 or a Reserved Register/Field fault may occur. - The caller must either guarantee that Value is valid, or the caller must set up - fault handlers to catch the faults. - This function is only available on IPF. - - @param Value The 64-bit value to write to ITV. - - @return The 64-bit value written to the ITV. - -**/ -UINT64 -EFIAPI -AsmWriteItv ( - IN UINT64 Value - ); - - -/** - Reads the current value of Default Control Register (DCR). - This function is only available on IPF. - - @return The current value of DCR. - -**/ -UINT64 -EFIAPI -AsmReadDcr ( - VOID - ); - - -/** - Reads the current value of Interruption Vector Address Register (IVA). - This function is only available on IPF. - - @return The current value of IVA. -**/ -UINT64 -EFIAPI -AsmReadIva ( - VOID - ); - - -/** - Reads the current value of Page Table Address Register (PTA). - This function is only available on IPF. - - @return The current value of PTA. - -**/ -UINT64 -EFIAPI -AsmReadPta ( - VOID - ); - - -/** - Writes the current value of 64-bit Default Control Register (DCR). - No parameter checking is performed on Value. All bits of Value corresponding to - reserved fields of DCR must be 0 or a Reserved Register/Field fault may occur. - The caller must either guarantee that Value is valid, or the caller must set up - fault handlers to catch the faults. - This function is only available on IPF. - - @param Value The 64-bit value to write to DCR. - - @return The 64-bit value written to the DCR. - -**/ -UINT64 -EFIAPI -AsmWriteDcr ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Interruption Vector Address Register (IVA). - The size of vector table is 32 K bytes and is 32 K bytes aligned - the low 15 bits of Value is ignored when written. - This function is only available on IPF. - - @param Value The 64-bit value to write to IVA. - - @return The 64-bit value written to the IVA. - -**/ -UINT64 -EFIAPI -AsmWriteIva ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Page Table Address Register (PTA). - No parameter checking is performed on Value. All bits of Value corresponding to - reserved fields of DCR must be 0 or a Reserved Register/Field fault may occur. - The caller must either guarantee that Value is valid, or the caller must set up - fault handlers to catch the faults. - This function is only available on IPF. - - @param Value The 64-bit value to write to PTA. - - @return The 64-bit value written to the PTA. -**/ -UINT64 -EFIAPI -AsmWritePta ( - IN UINT64 Value - ); - - -/** - Reads the current value of Local Interrupt ID Register (LID). - This function is only available on IPF. - - @return The current value of LID. - -**/ -UINT64 -EFIAPI -AsmReadLid ( - VOID - ); - - -/** - Reads the current value of External Interrupt Vector Register (IVR). - This function is only available on IPF. - - @return The current value of IVR. - -**/ -UINT64 -EFIAPI -AsmReadIvr ( - VOID - ); - - -/** - Reads the current value of Task Priority Register (TPR). - This function is only available on IPF. - - @return The current value of TPR. - -**/ -UINT64 -EFIAPI -AsmReadTpr ( - VOID - ); - - -/** - Reads the current value of External Interrupt Request Register #0 (IRR0). - This function is only available on IPF. - - @return The current value of IRR0. - -**/ -UINT64 -EFIAPI -AsmReadIrr0 ( - VOID - ); - - -/** - Reads the current value of External Interrupt Request Register #1 (IRR1). - This function is only available on IPF. - - @return The current value of IRR1. - -**/ -UINT64 -EFIAPI -AsmReadIrr1 ( - VOID - ); - - -/** - Reads the current value of External Interrupt Request Register #2 (IRR2). - This function is only available on IPF. - - @return The current value of IRR2. - -**/ -UINT64 -EFIAPI -AsmReadIrr2 ( - VOID - ); - - -/** - Reads the current value of External Interrupt Request Register #3 (IRR3). - This function is only available on IPF. - - @return The current value of IRR3. - -**/ -UINT64 -EFIAPI -AsmReadIrr3 ( - VOID - ); - - -/** - Reads the current value of Performance Monitor Vector Register (PMV). - This function is only available on IPF. - - @return The current value of PMV. - -**/ -UINT64 -EFIAPI -AsmReadPmv ( - VOID - ); - - -/** - Reads the current value of Corrected Machine Check Vector Register (CMCV). - This function is only available on IPF. - - @return The current value of CMCV. - -**/ -UINT64 -EFIAPI -AsmReadCmcv ( - VOID - ); - - -/** - Reads the current value of Local Redirection Register #0 (LRR0). - This function is only available on IPF. - - @return The current value of LRR0. - -**/ -UINT64 -EFIAPI -AsmReadLrr0 ( - VOID - ); - - -/** - Reads the current value of Local Redirection Register #1 (LRR1). - This function is only available on IPF. - - @return The current value of LRR1. - -**/ -UINT64 -EFIAPI -AsmReadLrr1 ( - VOID - ); - - -/** - Writes the current value of 64-bit Page Local Interrupt ID Register (LID). - No parameter checking is performed on Value. All bits of Value corresponding to - reserved fields of LID must be 0 or a Reserved Register/Field fault may occur. - The caller must either guarantee that Value is valid, or the caller must set up - fault handlers to catch the faults. - This function is only available on IPF. - - @param Value The 64-bit value to write to LID. - - @return The 64-bit value written to the LID. - -**/ -UINT64 -EFIAPI -AsmWriteLid ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Task Priority Register (TPR). - No parameter checking is performed on Value. All bits of Value corresponding to - reserved fields of TPR must be 0 or a Reserved Register/Field fault may occur. - The caller must either guarantee that Value is valid, or the caller must set up - fault handlers to catch the faults. - This function is only available on IPF. - - @param Value The 64-bit value to write to TPR. - - @return The 64-bit value written to the TPR. - -**/ -UINT64 -EFIAPI -AsmWriteTpr ( - IN UINT64 Value - ); - - -/** - Performs a write operation on End OF External Interrupt Register (EOI). - Writes a value of 0 to the EOI Register. This function is only available on IPF. - -**/ -VOID -EFIAPI -AsmWriteEoi ( - VOID - ); - - -/** - Writes the current value of 64-bit Performance Monitor Vector Register (PMV). - No parameter checking is performed on Value. All bits of Value corresponding - to reserved fields of PMV must be 0 or a Reserved Register/Field fault may occur. - The caller must either guarantee that Value is valid, or the caller must set up - fault handlers to catch the faults. - This function is only available on IPF. - - @param Value The 64-bit value to write to PMV. - - @return The 64-bit value written to the PMV. - -**/ -UINT64 -EFIAPI -AsmWritePmv ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Corrected Machine Check Vector Register (CMCV). - No parameter checking is performed on Value. All bits of Value corresponding - to reserved fields of CMCV must be 0 or a Reserved Register/Field fault may occur. - The caller must either guarantee that Value is valid, or the caller must set up - fault handlers to catch the faults. - This function is only available on IPF. - - @param Value The 64-bit value to write to CMCV. - - @return The 64-bit value written to the CMCV. - -**/ -UINT64 -EFIAPI -AsmWriteCmcv ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Local Redirection Register #0 (LRR0). - No parameter checking is performed on Value. All bits of Value corresponding - to reserved fields of LRR0 must be 0 or a Reserved Register/Field fault may occur. - The caller must either guarantee that Value is valid, or the caller must set up - fault handlers to catch the faults. - This function is only available on IPF. - - @param Value The 64-bit value to write to LRR0. - - @return The 64-bit value written to the LRR0. - -**/ -UINT64 -EFIAPI -AsmWriteLrr0 ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Local Redirection Register #1 (LRR1). - No parameter checking is performed on Value. All bits of Value corresponding - to reserved fields of LRR1 must be 0 or a Reserved Register/Field fault may occur. - The caller must either guarantee that Value is valid, or the caller must - set up fault handlers to catch the faults. - This function is only available on IPF. - - @param Value The 64-bit value to write to LRR1. - - @return The 64-bit value written to the LRR1. - -**/ -UINT64 -EFIAPI -AsmWriteLrr1 ( - IN UINT64 Value - ); - - -/** - Reads the current value of Instruction Breakpoint Register (IBR). - - The Instruction Breakpoint Registers are used in pairs. The even numbered - registers contain breakpoint addresses, and the odd numbered registers contain - breakpoint mask conditions. At least 4 instruction registers pairs are implemented - on all processor models. Implemented registers are contiguous starting with - register 0. No parameter checking is performed on Index, and if the Index value - is beyond the implemented IBR register range, a Reserved Register/Field fault may - occur. The caller must either guarantee that Index is valid, or the caller must - set up fault handlers to catch the faults. - This function is only available on IPF. - - @param Index The 8-bit Instruction Breakpoint Register index to read. - - @return The current value of Instruction Breakpoint Register specified by Index. - -**/ -UINT64 -EFIAPI -AsmReadIbr ( - IN UINT8 Index - ); - - -/** - Reads the current value of Data Breakpoint Register (DBR). - - The Data Breakpoint Registers are used in pairs. The even numbered registers - contain breakpoint addresses, and odd numbered registers contain breakpoint - mask conditions. At least 4 data registers pairs are implemented on all processor - models. Implemented registers are contiguous starting with register 0. - No parameter checking is performed on Index. If the Index value is beyond - the implemented DBR register range, a Reserved Register/Field fault may occur. - The caller must either guarantee that Index is valid, or the caller must set up - fault handlers to catch the faults. - This function is only available on IPF. - - @param Index The 8-bit Data Breakpoint Register index to read. - - @return The current value of Data Breakpoint Register specified by Index. - -**/ -UINT64 -EFIAPI -AsmReadDbr ( - IN UINT8 Index - ); - - -/** - Reads the current value of Performance Monitor Configuration Register (PMC). - - All processor implementations provide at least 4 performance counters - (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter overflow - status registers (PMC [0]¡­ PMC [3]). Processor implementations may provide - additional implementation-dependent PMC and PMD to increase the number of - ¡®generic¡¯ performance counters (PMC/PMD pairs). The remainder of PMC and PMD - register set is implementation dependent. No parameter checking is performed - on Index. If the Index value is beyond the implemented PMC register range, - zero value will be returned. - This function is only available on IPF. - - @param Index The 8-bit Performance Monitor Configuration Register index to read. - - @return The current value of Performance Monitor Configuration Register - specified by Index. - -**/ -UINT64 -EFIAPI -AsmReadPmc ( - IN UINT8 Index - ); - - -/** - Reads the current value of Performance Monitor Data Register (PMD). - - All processor implementations provide at least 4 performance counters - (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter - overflow status registers (PMC [0]¡­ PMC [3]). Processor implementations may - provide additional implementation-dependent PMC and PMD to increase the number - of ¡®generic¡¯ performance counters (PMC/PMD pairs). The remainder of PMC and PMD - register set is implementation dependent. No parameter checking is performed - on Index. If the Index value is beyond the implemented PMD register range, - zero value will be returned. - This function is only available on IPF. - - @param Index The 8-bit Performance Monitor Data Register index to read. - - @return The current value of Performance Monitor Data Register specified by Index. - -**/ -UINT64 -EFIAPI -AsmReadPmd ( - IN UINT8 Index - ); - - -/** - Writes the current value of 64-bit Instruction Breakpoint Register (IBR). - - Writes current value of Instruction Breakpoint Register specified by Index. - The Instruction Breakpoint Registers are used in pairs. The even numbered - registers contain breakpoint addresses, and odd numbered registers contain - breakpoint mask conditions. At least 4 instruction registers pairs are implemented - on all processor models. Implemented registers are contiguous starting with - register 0. No parameter checking is performed on Index. If the Index value - is beyond the implemented IBR register range, a Reserved Register/Field fault may - occur. The caller must either guarantee that Index is valid, or the caller must - set up fault handlers to catch the faults. - This function is only available on IPF. - - @param Index The 8-bit Instruction Breakpoint Register index to write. - @param Value The 64-bit value to write to IBR. - - @return The 64-bit value written to the IBR. - -**/ -UINT64 -EFIAPI -AsmWriteIbr ( - IN UINT8 Index, - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Data Breakpoint Register (DBR). - - Writes current value of Data Breakpoint Register specified by Index. - The Data Breakpoint Registers are used in pairs. The even numbered registers - contain breakpoint addresses, and odd numbered registers contain breakpoint - mask conditions. At least 4 data registers pairs are implemented on all processor - models. Implemented registers are contiguous starting with register 0. No parameter - checking is performed on Index. If the Index value is beyond the implemented - DBR register range, a Reserved Register/Field fault may occur. The caller must - either guarantee that Index is valid, or the caller must set up fault handlers to - catch the faults. - This function is only available on IPF. - - @param Index The 8-bit Data Breakpoint Register index to write. - @param Value The 64-bit value to write to DBR. - - @return The 64-bit value written to the DBR. - -**/ -UINT64 -EFIAPI -AsmWriteDbr ( - IN UINT8 Index, - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Performance Monitor Configuration Register (PMC). - - Writes current value of Performance Monitor Configuration Register specified by Index. - All processor implementations provide at least 4 performance counters - (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter overflow status - registers (PMC [0]¡­ PMC [3]). Processor implementations may provide additional - implementation-dependent PMC and PMD to increase the number of ¡®generic¡¯ performance - counters (PMC/PMD pairs). The remainder of PMC and PMD register set is implementation - dependent. No parameter checking is performed on Index. If the Index value is - beyond the implemented PMC register range, the write is ignored. - This function is only available on IPF. - - @param Index The 8-bit Performance Monitor Configuration Register index to write. - @param Value The 64-bit value to write to PMC. - - @return The 64-bit value written to the PMC. - -**/ -UINT64 -EFIAPI -AsmWritePmc ( - IN UINT8 Index, - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit Performance Monitor Data Register (PMD). - - Writes current value of Performance Monitor Data Register specified by Index. - All processor implementations provide at least 4 performance counters - (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter overflow - status registers (PMC [0]¡­ PMC [3]). Processor implementations may provide - additional implementation-dependent PMC and PMD to increase the number of ¡®generic¡¯ - performance counters (PMC/PMD pairs). The remainder of PMC and PMD register set - is implementation dependent. No parameter checking is performed on Index. If the - Index value is beyond the implemented PMD register range, the write is ignored. - This function is only available on IPF. - - @param Index The 8-bit Performance Monitor Data Register index to write. - @param Value The 64-bit value to write to PMD. - - @return The 64-bit value written to the PMD. - -**/ -UINT64 -EFIAPI -AsmWritePmd ( - IN UINT8 Index, - IN UINT64 Value - ); - - -/** - Reads the current value of 64-bit Global Pointer (GP). - - Reads and returns the current value of GP. - This function is only available on IPF. - - @return The current value of GP. - -**/ -UINT64 -EFIAPI -AsmReadGp ( - VOID - ); - - -/** - Write the current value of 64-bit Global Pointer (GP). - - Writes the current value of GP. The 64-bit value written to the GP is returned. - No parameter checking is performed on Value. - This function is only available on IPF. - - @param Value The 64-bit value to write to GP. - - @return The 64-bit value written to the GP. - -**/ -UINT64 -EFIAPI -AsmWriteGp ( - IN UINT64 Value - ); - - -/** - Reads the current value of 64-bit Stack Pointer (SP). - - Reads and returns the current value of SP. - This function is only available on IPF. - - @return The current value of SP. - -**/ -UINT64 -EFIAPI -AsmReadSp ( - VOID - ); - - -/** - Determines if the CPU is currently executing in virtual, physical, or mixed mode. - - Determines the current execution mode of the CPU. - If the CPU is in virtual mode(PSR.RT=1, PSR.DT=1, PSR.IT=1), then 1 is returned. - If the CPU is in physical mode(PSR.RT=0, PSR.DT=0, PSR.IT=0), then 0 is returned. - If the CPU is not in physical mode or virtual mode, then it is in mixed mode, - and -1 is returned. - This function is only available on IPF. - - @return 1 The CPU is in virtual mode. - @return 0 The CPU is in physical mode. - @return -1 The CPU is in mixed mode. - -**/ -INT64 -EFIAPI -AsmCpuVirtual ( - VOID - ); - - -/** - Makes a PAL procedure call. - - This is a wrapper function to make a PAL procedure call. Based on the Index - value this API will make static or stacked PAL call. The following table - describes the usage of PAL Procedure Index Assignment. Architected procedures - may be designated as required or optional. If a PAL procedure is specified - as optional, a unique return code of 0xFFFFFFFFFFFFFFFF is returned in the - Status field of the PAL_CALL_RETURN structure. - This indicates that the procedure is not present in this PAL implementation. - It is the caller¡¯s responsibility to check for this return code after calling - any optional PAL procedure. - No parameter checking is performed on the 5 input parameters, but there are - some common rules that the caller should follow when making a PAL call. Any - address passed to PAL as buffers for return parameters must be 8-byte aligned. - Unaligned addresses may cause undefined results. For those parameters defined - as reserved or some fields defined as reserved must be zero filled or the invalid - argument return value may be returned or undefined result may occur during the - execution of the procedure. If the PalEntryPoint does not point to a valid - PAL entry point then the system behavior is undefined. This function is only - available on IPF. - - @param PalEntryPoint The PAL procedure calls entry point. - @param Index The PAL procedure Index number. - @param Arg2 The 2nd parameter for PAL procedure calls. - @param Arg3 The 3rd parameter for PAL procedure calls. - @param Arg4 The 4th parameter for PAL procedure calls. - - @return structure returned from the PAL Call procedure, including the status and return value. - -**/ -PAL_CALL_RETURN -EFIAPI -AsmPalCall ( - IN UINT64 PalEntryPoint, - IN UINT64 Index, - IN UINT64 Arg2, - IN UINT64 Arg3, - IN UINT64 Arg4 - ); - - -/** - Transfers control to a function starting with a new stack. - - Transfers control to the function specified by EntryPoint using the new stack - specified by NewStack and passing in the parameters specified by Context1 and - Context2. Context1 and Context2 are optional and may be NULL. The function - EntryPoint must never return. - - If EntryPoint is NULL, then ASSERT(). - If NewStack is NULL, then ASSERT(). - - @param EntryPoint A pointer to function to call with the new stack. - @param Context1 A pointer to the context to pass into the EntryPoint - function. - @param Context2 A pointer to the context to pass into the EntryPoint - function. - @param NewStack A pointer to the new stack to use for the EntryPoint - function. - @param NewBsp A pointer to the new memory location for RSE backing - store. - -**/ -VOID -EFIAPI -AsmSwitchStackAndBackingStore ( - IN SWITCH_STACK_ENTRY_POINT EntryPoint, - IN VOID *Context1, OPTIONAL - IN VOID *Context2, OPTIONAL - IN VOID *NewStack, - IN VOID *NewBsp - ); - - -// -// Bugbug: This call should be removed after -// the PalCall Instance issue has been fixed. -// -/** - Performs a PAL call using static calling convention. - - An internal function to perform a PAL call using static calling convention. - - @param PalEntryPoint The entry point address of PAL. The address in ar.kr5 - would be used if this parameter were NULL on input. - @param Arg1 The first argument of a PAL call. - @param Arg1 The second argument of a PAL call. - @param Arg1 The third argument of a PAL call. - @param Arg1 The fourth argument of a PAL call. - - @return The values returned in r8, r9, r10 and r11. - -**/ -PAL_CALL_RETURN -PalCallStatic ( - IN CONST VOID *PalEntryPoint, - IN UINT64 Arg1, - IN UINT64 Arg2, - IN UINT64 Arg3, - IN UINT64 Arg4 - ); - - -#elif defined (MDE_CPU_IA32) || defined (MDE_CPU_X64) -// -// IA32 and X64 Specific Functions -// -// -// Byte packed structure for 16-bit Real Mode EFLAGS -// -typedef union { - struct { - UINT32 CF:1; // Carry Flag - UINT32 Reserved_0:1; // Reserved - UINT32 PF:1; // Parity Flag - UINT32 Reserved_1:1; // Reserved - UINT32 AF:1; // Auxiliary Carry Flag - UINT32 Reserved_2:1; // Reserved - UINT32 ZF:1; // Zero Flag - UINT32 SF:1; // Sign Flag - UINT32 TF:1; // Trap Flag - UINT32 IF:1; // Interrupt Enable Flag - UINT32 DF:1; // Direction Flag - UINT32 OF:1; // Overflow Flag - UINT32 IOPL:2; // I/O Privilege Level - UINT32 NT:1; // Nested Task - UINT32 Reserved_3:1; // Reserved - } Bits; - UINT16 Uint16; -} IA32_FLAGS16; - -// -// Byte packed structure for EFLAGS/RFLAGS -// 32-bits on IA-32 -// 64-bits on X64. The upper 32-bits on X64 are reserved -// -typedef union { - struct { - UINT32 CF:1; // Carry Flag - UINT32 Reserved_0:1; // Reserved - UINT32 PF:1; // Parity Flag - UINT32 Reserved_1:1; // Reserved - UINT32 AF:1; // Auxiliary Carry Flag - UINT32 Reserved_2:1; // Reserved - UINT32 ZF:1; // Zero Flag - UINT32 SF:1; // Sign Flag - UINT32 TF:1; // Trap Flag - UINT32 IF:1; // Interrupt Enable Flag - UINT32 DF:1; // Direction Flag - UINT32 OF:1; // Overflow Flag - UINT32 IOPL:2; // I/O Privilege Level - UINT32 NT:1; // Nested Task - UINT32 Reserved_3:1; // Reserved - UINT32 RF:1; // Resume Flag - UINT32 VM:1; // Virtual 8086 Mode - UINT32 AC:1; // Alignment Check - UINT32 VIF:1; // Virtual Interrupt Flag - UINT32 VIP:1; // Virtual Interrupt Pending - UINT32 ID:1; // ID Flag - UINT32 Reserved_4:10; // Reserved - } Bits; - UINTN UintN; -} IA32_EFLAGS32; - -// -// Byte packed structure for Control Register 0 (CR0) -// 32-bits on IA-32 -// 64-bits on X64. The upper 32-bits on X64 are reserved -// -typedef union { - struct { - UINT32 PE:1; // Protection Enable - UINT32 MP:1; // Monitor Coprocessor - UINT32 EM:1; // Emulation - UINT32 TS:1; // Task Switched - UINT32 ET:1; // Extension Type - UINT32 NE:1; // Numeric Error - UINT32 Reserved_0:10; // Reserved - UINT32 WP:1; // Write Protect - UINT32 Reserved_1:1; // Reserved - UINT32 AM:1; // Alignment Mask - UINT32 Reserved_2:10; // Reserved - UINT32 NW:1; // Mot Write-through - UINT32 CD:1; // Cache Disable - UINT32 PG:1; // Paging - } Bits; - UINTN UintN; -} IA32_CR0; - -// -// Byte packed structure for Control Register 4 (CR4) -// 32-bits on IA-32 -// 64-bits on X64. The upper 32-bits on X64 are reserved -// -typedef union { - struct { - UINT32 VME:1; // Virtual-8086 Mode Extensions - UINT32 PVI:1; // Protected-Mode Virtual Interrupts - UINT32 TSD:1; // Time Stamp Disable - UINT32 DE:1; // Debugging Extensions - UINT32 PSE:1; // Page Size Extensions - UINT32 PAE:1; // Physical Address Extension - UINT32 MCE:1; // Machine Check Enable - UINT32 PGE:1; // Page Global Enable - UINT32 PCE:1; // Performance Monitoring Counter - // Enable - UINT32 OSFXSR:1; // Operating System Support for - // FXSAVE and FXRSTOR instructions - UINT32 OSXMMEXCPT:1; // Operating System Support for - // Unmasked SIMD Floating Point - // Exceptions - UINT32 Reserved_0:2; // Reserved - UINT32 VMXE:1; // VMX Enable - UINT32 Reserved_1:18; // Reseved - } Bits; - UINTN UintN; -} IA32_CR4; - -// -// Byte packed structure for an IDTR, GDTR, LDTR descriptor -/// @bug How to make this structure byte-packed in a compiler independent way? -// -#pragma pack (1) -typedef struct { - UINT16 Limit; - UINTN Base; -} IA32_DESCRIPTOR; -#pragma pack () - -#define IA32_IDT_GATE_TYPE_TASK 0x85 -#define IA32_IDT_GATE_TYPE_INTERRUPT_16 0x86 -#define IA32_IDT_GATE_TYPE_TRAP_16 0x87 -#define IA32_IDT_GATE_TYPE_INTERRUPT_32 0x8E -#define IA32_IDT_GATE_TYPE_TRAP_32 0x8F - -// -// Byte packed structure for an Interrupt Gate Descriptor -// -typedef union { - struct { - UINT32 OffsetLow:16; // Offset bits 15..0 - UINT32 Selector:16; // Selector - UINT32 Reserved_0:8; // Reserved - UINT32 GateType:8; // Gate Type. See #defines above - UINT32 OffsetHigh:16; // Offset bits 31..16 - } Bits; - UINT64 Uint64; -} IA32_IDT_GATE_DESCRIPTOR; - -// -// Byte packed structure for an FP/SSE/SSE2 context -// -typedef struct { - UINT8 Buffer[512]; -} IA32_FX_BUFFER; - -// -// Structures for the 16-bit real mode thunks -// -typedef struct { - UINT32 Reserved1; - UINT32 Reserved2; - UINT32 Reserved3; - UINT32 Reserved4; - UINT8 BL; - UINT8 BH; - UINT16 Reserved5; - UINT8 DL; - UINT8 DH; - UINT16 Reserved6; - UINT8 CL; - UINT8 CH; - UINT16 Reserved7; - UINT8 AL; - UINT8 AH; - UINT16 Reserved8; -} IA32_BYTE_REGS; - -typedef struct { - UINT16 DI; - UINT16 Reserved1; - UINT16 SI; - UINT16 Reserved2; - UINT16 BP; - UINT16 Reserved3; - UINT16 SP; - UINT16 Reserved4; - UINT16 BX; - UINT16 Reserved5; - UINT16 DX; - UINT16 Reserved6; - UINT16 CX; - UINT16 Reserved7; - UINT16 AX; - UINT16 Reserved8; -} IA32_WORD_REGS; - -typedef struct { - UINT32 EDI; - UINT32 ESI; - UINT32 EBP; - UINT32 ESP; - UINT32 EBX; - UINT32 EDX; - UINT32 ECX; - UINT32 EAX; - UINT16 DS; - UINT16 ES; - UINT16 FS; - UINT16 GS; - IA32_EFLAGS32 EFLAGS; - UINT32 Eip; - UINT16 CS; - UINT16 SS; -} IA32_DWORD_REGS; - -typedef union { - IA32_DWORD_REGS E; - IA32_WORD_REGS X; - IA32_BYTE_REGS H; -} IA32_REGISTER_SET; - -// -// Byte packed structure for an 16-bit real mode thunks -// -typedef struct { - IA32_REGISTER_SET *RealModeState; - VOID *RealModeBuffer; - UINT32 RealModeBufferSize; - UINT32 ThunkAttributes; -} THUNK_CONTEXT; - -#define THUNK_ATTRIBUTE_BIG_REAL_MODE 0x00000001 -#define THUNK_ATTRIBUTE_DISABLE_A20_MASK_INT_15 0x00000002 -#define THUNK_ATTRIBUTE_DISABLE_A20_MASK_KBD_CTRL 0x00000004 - -/** - Retrieves CPUID information. - - Executes the CPUID instruction with EAX set to the value specified by Index. - This function always returns Index. - If Eax is not NULL, then the value of EAX after CPUID is returned in Eax. - If Ebx is not NULL, then the value of EBX after CPUID is returned in Ebx. - If Ecx is not NULL, then the value of ECX after CPUID is returned in Ecx. - If Edx is not NULL, then the value of EDX after CPUID is returned in Edx. - This function is only available on IA-32 and X64. - - @param Index The 32-bit value to load into EAX prior to invoking the CPUID - instruction. - @param Eax Pointer to the 32-bit EAX value returned by the CPUID - instruction. This is an optional parameter that may be NULL. - @param Ebx Pointer to the 32-bit EBX value returned by the CPUID - instruction. This is an optional parameter that may be NULL. - @param Ecx Pointer to the 32-bit ECX value returned by the CPUID - instruction. This is an optional parameter that may be NULL. - @param Edx Pointer to the 32-bit EDX value returned by the CPUID - instruction. This is an optional parameter that may be NULL. - - @return Index - -**/ -UINT32 -EFIAPI -AsmCpuid ( - IN UINT32 Index, - OUT UINT32 *Eax, OPTIONAL - OUT UINT32 *Ebx, OPTIONAL - OUT UINT32 *Ecx, OPTIONAL - OUT UINT32 *Edx OPTIONAL - ); - - -/** - Retrieves CPUID information using an extended leaf identifier. - - Executes the CPUID instruction with EAX set to the value specified by Index - and ECX set to the value specified by SubIndex. This function always returns - Index. This function is only available on IA-32 and x64. - - If Eax is not NULL, then the value of EAX after CPUID is returned in Eax. - If Ebx is not NULL, then the value of EBX after CPUID is returned in Ebx. - If Ecx is not NULL, then the value of ECX after CPUID is returned in Ecx. - If Edx is not NULL, then the value of EDX after CPUID is returned in Edx. - - @param Index The 32-bit value to load into EAX prior to invoking the - CPUID instruction. - @param SubIndex The 32-bit value to load into ECX prior to invoking the - CPUID instruction. - @param Eax Pointer to the 32-bit EAX value returned by the CPUID - instruction. This is an optional parameter that may be - NULL. - @param Ebx Pointer to the 32-bit EBX value returned by the CPUID - instruction. This is an optional parameter that may be - NULL. - @param Ecx Pointer to the 32-bit ECX value returned by the CPUID - instruction. This is an optional parameter that may be - NULL. - @param Edx Pointer to the 32-bit EDX value returned by the CPUID - instruction. This is an optional parameter that may be - NULL. - - @return Index - -**/ -UINT32 -EFIAPI -AsmCpuidEx ( - IN UINT32 Index, - IN UINT32 SubIndex, - OUT UINT32 *Eax, OPTIONAL - OUT UINT32 *Ebx, OPTIONAL - OUT UINT32 *Ecx, OPTIONAL - OUT UINT32 *Edx OPTIONAL - ); - - -/** - Returns the lower 32-bits of a Machine Specific Register(MSR). - - Reads and returns the lower 32-bits of the MSR specified by Index. - No parameter checking is performed on Index, and some Index values may cause - CPU exceptions. The caller must either guarantee that Index is valid, or the - caller must set up exception handlers to catch the exceptions. This function - is only available on IA-32 and X64. - - @param Index The 32-bit MSR index to read. - - @return The lower 32 bits of the MSR identified by Index. - -**/ -UINT32 -EFIAPI -AsmReadMsr32 ( - IN UINT32 Index - ); - - -/** - Zero-extend a 32-bit value and writes it to a Machine Specific Register(MSR). - - Writes the 32-bit value specified by Value to the MSR specified by Index. The - upper 32-bits of the MSR write are set to zero. The 32-bit value written to - the MSR is returned. No parameter checking is performed on Index or Value, - and some of these may cause CPU exceptions. The caller must either guarantee - that Index and Value are valid, or the caller must establish proper exception - handlers. This function is only available on IA-32 and X64. - - @param Index The 32-bit MSR index to write. - @param Value The 32-bit value to write to the MSR. - - @return Value - -**/ -UINT32 -EFIAPI -AsmWriteMsr32 ( - IN UINT32 Index, - IN UINT32 Value - ); - - -/** - Reads a 64-bit MSR, performs a bitwise inclusive OR on the lower 32-bits, and - writes the result back to the 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise inclusive OR - between the lower 32-bits of the read result and the value specified by - OrData, and writes the result to the 64-bit MSR specified by Index. The lower - 32-bits of the value written to the MSR is returned. No parameter checking is - performed on Index or OrData, and some of these may cause CPU exceptions. The - caller must either guarantee that Index and OrData are valid, or the caller - must establish proper exception handlers. This function is only available on - IA-32 and X64. - - @param Index The 32-bit MSR index to write. - @param OrData The value to OR with the read value from the MSR. - - @return The lower 32-bit value written to the MSR. - -**/ -UINT32 -EFIAPI -AsmMsrOr32 ( - IN UINT32 Index, - IN UINT32 OrData - ); - - -/** - Reads a 64-bit MSR, performs a bitwise AND on the lower 32-bits, and writes - the result back to the 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise AND between the - lower 32-bits of the read result and the value specified by AndData, and - writes the result to the 64-bit MSR specified by Index. The lower 32-bits of - the value written to the MSR is returned. No parameter checking is performed - on Index or AndData, and some of these may cause CPU exceptions. The caller - must either guarantee that Index and AndData are valid, or the caller must - establish proper exception handlers. This function is only available on IA-32 - and X64. - - @param Index The 32-bit MSR index to write. - @param AndData The value to AND with the read value from the MSR. - - @return The lower 32-bit value written to the MSR. - -**/ -UINT32 -EFIAPI -AsmMsrAnd32 ( - IN UINT32 Index, - IN UINT32 AndData - ); - - -/** - Reads a 64-bit MSR, performs a bitwise AND followed by a bitwise inclusive OR - on the lower 32-bits, and writes the result back to the 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise AND between the - lower 32-bits of the read result and the value specified by AndData - preserving the upper 32-bits, performs a bitwise inclusive OR between the - result of the AND operation and the value specified by OrData, and writes the - result to the 64-bit MSR specified by Address. The lower 32-bits of the value - written to the MSR is returned. No parameter checking is performed on Index, - AndData, or OrData, and some of these may cause CPU exceptions. The caller - must either guarantee that Index, AndData, and OrData are valid, or the - caller must establish proper exception handlers. This function is only - available on IA-32 and X64. - - @param Index The 32-bit MSR index to write. - @param AndData The value to AND with the read value from the MSR. - @param OrData The value to OR with the result of the AND operation. - - @return The lower 32-bit value written to the MSR. - -**/ -UINT32 -EFIAPI -AsmMsrAndThenOr32 ( - IN UINT32 Index, - IN UINT32 AndData, - IN UINT32 OrData - ); - - -/** - Reads a bit field of an MSR. - - Reads the bit field in the lower 32-bits of a 64-bit MSR. The bit field is - specified by the StartBit and the EndBit. The value of the bit field is - returned. The caller must either guarantee that Index is valid, or the caller - must set up exception handlers to catch the exceptions. This function is only - available on IA-32 and X64. - - If StartBit is greater than 31, then ASSERT(). - If EndBit is greater than 31, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Index The 32-bit MSR index to read. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..31. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..31. - - @return The bit field read from the MSR. - -**/ -UINT32 -EFIAPI -AsmMsrBitFieldRead32 ( - IN UINT32 Index, - IN UINTN StartBit, - IN UINTN EndBit - ); - - -/** - Writes a bit field to an MSR. - - Writes Value to a bit field in the lower 32-bits of a 64-bit MSR. The bit - field is specified by the StartBit and the EndBit. All other bits in the - destination MSR are preserved. The lower 32-bits of the MSR written is - returned. Extra left bits in Value are stripped. The caller must either - guarantee that Index and the data written is valid, or the caller must set up - exception handlers to catch the exceptions. This function is only available - on IA-32 and X64. - - If StartBit is greater than 31, then ASSERT(). - If EndBit is greater than 31, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Index The 32-bit MSR index to write. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..31. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..31. - @param Value New value of the bit field. - - @return The lower 32-bit of the value written to the MSR. - -**/ -UINT32 -EFIAPI -AsmMsrBitFieldWrite32 ( - IN UINT32 Index, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT32 Value - ); - - -/** - Reads a bit field in a 64-bit MSR, performs a bitwise OR, and writes the - result back to the bit field in the 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise inclusive OR - between the read result and the value specified by OrData, and writes the - result to the 64-bit MSR specified by Index. The lower 32-bits of the value - written to the MSR are returned. Extra left bits in OrData are stripped. The - caller must either guarantee that Index and the data written is valid, or - the caller must set up exception handlers to catch the exceptions. This - function is only available on IA-32 and X64. - - If StartBit is greater than 31, then ASSERT(). - If EndBit is greater than 31, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Index The 32-bit MSR index to write. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..31. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..31. - @param OrData The value to OR with the read value from the MSR. - - @return The lower 32-bit of the value written to the MSR. - -**/ -UINT32 -EFIAPI -AsmMsrBitFieldOr32 ( - IN UINT32 Index, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT32 OrData - ); - - -/** - Reads a bit field in a 64-bit MSR, performs a bitwise AND, and writes the - result back to the bit field in the 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise AND between the - read result and the value specified by AndData, and writes the result to the - 64-bit MSR specified by Index. The lower 32-bits of the value written to the - MSR are returned. Extra left bits in AndData are stripped. The caller must - either guarantee that Index and the data written is valid, or the caller must - set up exception handlers to catch the exceptions. This function is only - available on IA-32 and X64. - - If StartBit is greater than 31, then ASSERT(). - If EndBit is greater than 31, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Index The 32-bit MSR index to write. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..31. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..31. - @param AndData The value to AND with the read value from the MSR. - - @return The lower 32-bit of the value written to the MSR. - -**/ -UINT32 -EFIAPI -AsmMsrBitFieldAnd32 ( - IN UINT32 Index, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT32 AndData - ); - - -/** - Reads a bit field in a 64-bit MSR, performs a bitwise AND followed by a - bitwise inclusive OR, and writes the result back to the bit field in the - 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise AND followed by a - bitwise inclusive OR between the read result and the value specified by - AndData, and writes the result to the 64-bit MSR specified by Index. The - lower 32-bits of the value written to the MSR are returned. Extra left bits - in both AndData and OrData are stripped. The caller must either guarantee - that Index and the data written is valid, or the caller must set up exception - handlers to catch the exceptions. This function is only available on IA-32 - and X64. - - If StartBit is greater than 31, then ASSERT(). - If EndBit is greater than 31, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Index The 32-bit MSR index to write. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..31. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..31. - @param AndData The value to AND with the read value from the MSR. - @param OrData The value to OR with the result of the AND operation. - - @return The lower 32-bit of the value written to the MSR. - -**/ -UINT32 -EFIAPI -AsmMsrBitFieldAndThenOr32 ( - IN UINT32 Index, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT32 AndData, - IN UINT32 OrData - ); - - -/** - Returns a 64-bit Machine Specific Register(MSR). - - Reads and returns the 64-bit MSR specified by Index. No parameter checking is - performed on Index, and some Index values may cause CPU exceptions. The - caller must either guarantee that Index is valid, or the caller must set up - exception handlers to catch the exceptions. This function is only available - on IA-32 and X64. - - @param Index The 32-bit MSR index to read. - - @return The value of the MSR identified by Index. - -**/ -UINT64 -EFIAPI -AsmReadMsr64 ( - IN UINT32 Index - ); - - -/** - Writes a 64-bit value to a Machine Specific Register(MSR), and returns the - value. - - Writes the 64-bit value specified by Value to the MSR specified by Index. The - 64-bit value written to the MSR is returned. No parameter checking is - performed on Index or Value, and some of these may cause CPU exceptions. The - caller must either guarantee that Index and Value are valid, or the caller - must establish proper exception handlers. This function is only available on - IA-32 and X64. - - @param Index The 32-bit MSR index to write. - @param Value The 64-bit value to write to the MSR. - - @return Value - -**/ -UINT64 -EFIAPI -AsmWriteMsr64 ( - IN UINT32 Index, - IN UINT64 Value - ); - - -/** - Reads a 64-bit MSR, performs a bitwise inclusive OR, and writes the result - back to the 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise inclusive OR - between the read result and the value specified by OrData, and writes the - result to the 64-bit MSR specified by Index. The value written to the MSR is - returned. No parameter checking is performed on Index or OrData, and some of - these may cause CPU exceptions. The caller must either guarantee that Index - and OrData are valid, or the caller must establish proper exception handlers. - This function is only available on IA-32 and X64. - - @param Index The 32-bit MSR index to write. - @param OrData The value to OR with the read value from the MSR. - - @return The value written back to the MSR. - -**/ -UINT64 -EFIAPI -AsmMsrOr64 ( - IN UINT32 Index, - IN UINT64 OrData - ); - - -/** - Reads a 64-bit MSR, performs a bitwise AND, and writes the result back to the - 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise AND between the - read result and the value specified by OrData, and writes the result to the - 64-bit MSR specified by Index. The value written to the MSR is returned. No - parameter checking is performed on Index or OrData, and some of these may - cause CPU exceptions. The caller must either guarantee that Index and OrData - are valid, or the caller must establish proper exception handlers. This - function is only available on IA-32 and X64. - - @param Index The 32-bit MSR index to write. - @param AndData The value to AND with the read value from the MSR. - - @return The value written back to the MSR. - -**/ -UINT64 -EFIAPI -AsmMsrAnd64 ( - IN UINT32 Index, - IN UINT64 AndData - ); - - -/** - Reads a 64-bit MSR, performs a bitwise AND followed by a bitwise inclusive - OR, and writes the result back to the 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise AND between read - result and the value specified by AndData, performs a bitwise inclusive OR - between the result of the AND operation and the value specified by OrData, - and writes the result to the 64-bit MSR specified by Index. The value written - to the MSR is returned. No parameter checking is performed on Index, AndData, - or OrData, and some of these may cause CPU exceptions. The caller must either - guarantee that Index, AndData, and OrData are valid, or the caller must - establish proper exception handlers. This function is only available on IA-32 - and X64. - - @param Index The 32-bit MSR index to write. - @param AndData The value to AND with the read value from the MSR. - @param OrData The value to OR with the result of the AND operation. - - @return The value written back to the MSR. - -**/ -UINT64 -EFIAPI -AsmMsrAndThenOr64 ( - IN UINT32 Index, - IN UINT64 AndData, - IN UINT64 OrData - ); - - -/** - Reads a bit field of an MSR. - - Reads the bit field in the 64-bit MSR. The bit field is specified by the - StartBit and the EndBit. The value of the bit field is returned. The caller - must either guarantee that Index is valid, or the caller must set up - exception handlers to catch the exceptions. This function is only available - on IA-32 and X64. - - If StartBit is greater than 63, then ASSERT(). - If EndBit is greater than 63, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Index The 32-bit MSR index to read. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..63. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..63. - - @return The value read from the MSR. - -**/ -UINT64 -EFIAPI -AsmMsrBitFieldRead64 ( - IN UINT32 Index, - IN UINTN StartBit, - IN UINTN EndBit - ); - - -/** - Writes a bit field to an MSR. - - Writes Value to a bit field in a 64-bit MSR. The bit field is specified by - the StartBit and the EndBit. All other bits in the destination MSR are - preserved. The MSR written is returned. Extra left bits in Value are - stripped. The caller must either guarantee that Index and the data written is - valid, or the caller must set up exception handlers to catch the exceptions. - This function is only available on IA-32 and X64. - - If StartBit is greater than 63, then ASSERT(). - If EndBit is greater than 63, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Index The 32-bit MSR index to write. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..63. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..63. - @param Value New value of the bit field. - - @return The value written back to the MSR. - -**/ -UINT64 -EFIAPI -AsmMsrBitFieldWrite64 ( - IN UINT32 Index, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT64 Value - ); - - -/** - Reads a bit field in a 64-bit MSR, performs a bitwise inclusive OR, and - writes the result back to the bit field in the 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise inclusive OR - between the read result and the value specified by OrData, and writes the - result to the 64-bit MSR specified by Index. The value written to the MSR is - returned. Extra left bits in OrData are stripped. The caller must either - guarantee that Index and the data written is valid, or the caller must set up - exception handlers to catch the exceptions. This function is only available - on IA-32 and X64. - - If StartBit is greater than 63, then ASSERT(). - If EndBit is greater than 63, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Index The 32-bit MSR index to write. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..63. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..63. - @param OrData The value to OR with the read value from the bit field. - - @return The value written back to the MSR. - -**/ -UINT64 -EFIAPI -AsmMsrBitFieldOr64 ( - IN UINT32 Index, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT64 OrData - ); - - -/** - Reads a bit field in a 64-bit MSR, performs a bitwise AND, and writes the - result back to the bit field in the 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise AND between the - read result and the value specified by AndData, and writes the result to the - 64-bit MSR specified by Index. The value written to the MSR is returned. - Extra left bits in AndData are stripped. The caller must either guarantee - that Index and the data written is valid, or the caller must set up exception - handlers to catch the exceptions. This function is only available on IA-32 - and X64. - - If StartBit is greater than 63, then ASSERT(). - If EndBit is greater than 63, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Index The 32-bit MSR index to write. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..63. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..63. - @param AndData The value to AND with the read value from the bit field. - - @return The value written back to the MSR. - -**/ -UINT64 -EFIAPI -AsmMsrBitFieldAnd64 ( - IN UINT32 Index, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT64 AndData - ); - - -/** - Reads a bit field in a 64-bit MSR, performs a bitwise AND followed by a - bitwise inclusive OR, and writes the result back to the bit field in the - 64-bit MSR. - - Reads the 64-bit MSR specified by Index, performs a bitwise AND followed by - a bitwise inclusive OR between the read result and the value specified by - AndData, and writes the result to the 64-bit MSR specified by Index. The - value written to the MSR is returned. Extra left bits in both AndData and - OrData are stripped. The caller must either guarantee that Index and the data - written is valid, or the caller must set up exception handlers to catch the - exceptions. This function is only available on IA-32 and X64. - - If StartBit is greater than 63, then ASSERT(). - If EndBit is greater than 63, then ASSERT(). - If EndBit is less than StartBit, then ASSERT(). - - @param Index The 32-bit MSR index to write. - @param StartBit The ordinal of the least significant bit in the bit field. - Range 0..63. - @param EndBit The ordinal of the most significant bit in the bit field. - Range 0..63. - @param AndData The value to AND with the read value from the bit field. - @param OrData The value to OR with the result of the AND operation. - - @return The value written back to the MSR. - -**/ -UINT64 -EFIAPI -AsmMsrBitFieldAndThenOr64 ( - IN UINT32 Index, - IN UINTN StartBit, - IN UINTN EndBit, - IN UINT64 AndData, - IN UINT64 OrData - ); - - -/** - Reads the current value of the EFLAGS register. - - Reads and returns the current value of the EFLAGS register. This function is - only available on IA-32 and X64. This returns a 32-bit value on IA-32 and a - 64-bit value on X64. - - @return EFLAGS on IA-32 or RFLAGS on X64. - -**/ -UINTN -EFIAPI -AsmReadEflags ( - VOID - ); - - -/** - Reads the current value of the Control Register 0 (CR0). - - Reads and returns the current value of CR0. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of the Control Register 0 (CR0). - -**/ -UINTN -EFIAPI -AsmReadCr0 ( - VOID - ); - - -/** - Reads the current value of the Control Register 2 (CR2). - - Reads and returns the current value of CR2. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of the Control Register 2 (CR2). - -**/ -UINTN -EFIAPI -AsmReadCr2 ( - VOID - ); - - -/** - Reads the current value of the Control Register 3 (CR3). - - Reads and returns the current value of CR3. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of the Control Register 3 (CR3). - -**/ -UINTN -EFIAPI -AsmReadCr3 ( - VOID - ); - - -/** - Reads the current value of the Control Register 4 (CR4). - - Reads and returns the current value of CR4. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of the Control Register 4 (CR4). - -**/ -UINTN -EFIAPI -AsmReadCr4 ( - VOID - ); - - -/** - Writes a value to Control Register 0 (CR0). - - Writes and returns a new value to CR0. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Cr0 The value to write to CR0. - - @return The value written to CR0. - -**/ -UINTN -EFIAPI -AsmWriteCr0 ( - UINTN Cr0 - ); - - -/** - Writes a value to Control Register 2 (CR2). - - Writes and returns a new value to CR2. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Cr2 The value to write to CR2. - - @return The value written to CR2. - -**/ -UINTN -EFIAPI -AsmWriteCr2 ( - UINTN Cr2 - ); - - -/** - Writes a value to Control Register 3 (CR3). - - Writes and returns a new value to CR3. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Cr3 The value to write to CR3. - - @return The value written to CR3. - -**/ -UINTN -EFIAPI -AsmWriteCr3 ( - UINTN Cr3 - ); - - -/** - Writes a value to Control Register 4 (CR4). - - Writes and returns a new value to CR4. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Cr4 The value to write to CR4. - - @return The value written to CR4. - -**/ -UINTN -EFIAPI -AsmWriteCr4 ( - UINTN Cr4 - ); - - -/** - Reads the current value of Debug Register 0 (DR0). - - Reads and returns the current value of DR0. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of Debug Register 0 (DR0). - -**/ -UINTN -EFIAPI -AsmReadDr0 ( - VOID - ); - - -/** - Reads the current value of Debug Register 1 (DR1). - - Reads and returns the current value of DR1. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of Debug Register 1 (DR1). - -**/ -UINTN -EFIAPI -AsmReadDr1 ( - VOID - ); - - -/** - Reads the current value of Debug Register 2 (DR2). - - Reads and returns the current value of DR2. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of Debug Register 2 (DR2). - -**/ -UINTN -EFIAPI -AsmReadDr2 ( - VOID - ); - - -/** - Reads the current value of Debug Register 3 (DR3). - - Reads and returns the current value of DR3. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of Debug Register 3 (DR3). - -**/ -UINTN -EFIAPI -AsmReadDr3 ( - VOID - ); - - -/** - Reads the current value of Debug Register 4 (DR4). - - Reads and returns the current value of DR4. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of Debug Register 4 (DR4). - -**/ -UINTN -EFIAPI -AsmReadDr4 ( - VOID - ); - - -/** - Reads the current value of Debug Register 5 (DR5). - - Reads and returns the current value of DR5. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of Debug Register 5 (DR5). - -**/ -UINTN -EFIAPI -AsmReadDr5 ( - VOID - ); - - -/** - Reads the current value of Debug Register 6 (DR6). - - Reads and returns the current value of DR6. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of Debug Register 6 (DR6). - -**/ -UINTN -EFIAPI -AsmReadDr6 ( - VOID - ); - - -/** - Reads the current value of Debug Register 7 (DR7). - - Reads and returns the current value of DR7. This function is only available - on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on - X64. - - @return The value of Debug Register 7 (DR7). - -**/ -UINTN -EFIAPI -AsmReadDr7 ( - VOID - ); - - -/** - Writes a value to Debug Register 0 (DR0). - - Writes and returns a new value to DR0. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Dr0 The value to write to Dr0. - - @return The value written to Debug Register 0 (DR0). - -**/ -UINTN -EFIAPI -AsmWriteDr0 ( - UINTN Dr0 - ); - - -/** - Writes a value to Debug Register 1 (DR1). - - Writes and returns a new value to DR1. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Dr1 The value to write to Dr1. - - @return The value written to Debug Register 1 (DR1). - -**/ -UINTN -EFIAPI -AsmWriteDr1 ( - UINTN Dr1 - ); - - -/** - Writes a value to Debug Register 2 (DR2). - - Writes and returns a new value to DR2. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Dr2 The value to write to Dr2. - - @return The value written to Debug Register 2 (DR2). - -**/ -UINTN -EFIAPI -AsmWriteDr2 ( - UINTN Dr2 - ); - - -/** - Writes a value to Debug Register 3 (DR3). - - Writes and returns a new value to DR3. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Dr3 The value to write to Dr3. - - @return The value written to Debug Register 3 (DR3). - -**/ -UINTN -EFIAPI -AsmWriteDr3 ( - UINTN Dr3 - ); - - -/** - Writes a value to Debug Register 4 (DR4). - - Writes and returns a new value to DR4. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Dr4 The value to write to Dr4. - - @return The value written to Debug Register 4 (DR4). - -**/ -UINTN -EFIAPI -AsmWriteDr4 ( - UINTN Dr4 - ); - - -/** - Writes a value to Debug Register 5 (DR5). - - Writes and returns a new value to DR5. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Dr5 The value to write to Dr5. - - @return The value written to Debug Register 5 (DR5). - -**/ -UINTN -EFIAPI -AsmWriteDr5 ( - UINTN Dr5 - ); - - -/** - Writes a value to Debug Register 6 (DR6). - - Writes and returns a new value to DR6. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Dr6 The value to write to Dr6. - - @return The value written to Debug Register 6 (DR6). - -**/ -UINTN -EFIAPI -AsmWriteDr6 ( - UINTN Dr6 - ); - - -/** - Writes a value to Debug Register 7 (DR7). - - Writes and returns a new value to DR7. This function is only available on - IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. - - @param Dr7 The value to write to Dr7. - - @return The value written to Debug Register 7 (DR7). - -**/ -UINTN -EFIAPI -AsmWriteDr7 ( - UINTN Dr7 - ); - - -/** - Reads the current value of Code Segment Register (CS). - - Reads and returns the current value of CS. This function is only available on - IA-32 and X64. - - @return The current value of CS. - -**/ -UINT16 -EFIAPI -AsmReadCs ( - VOID - ); - - -/** - Reads the current value of Data Segment Register (DS). - - Reads and returns the current value of DS. This function is only available on - IA-32 and X64. - - @return The current value of DS. - -**/ -UINT16 -EFIAPI -AsmReadDs ( - VOID - ); - - -/** - Reads the current value of Extra Segment Register (ES). - - Reads and returns the current value of ES. This function is only available on - IA-32 and X64. - - @return The current value of ES. - -**/ -UINT16 -EFIAPI -AsmReadEs ( - VOID - ); - - -/** - Reads the current value of FS Data Segment Register (FS). - - Reads and returns the current value of FS. This function is only available on - IA-32 and X64. - - @return The current value of FS. - -**/ -UINT16 -EFIAPI -AsmReadFs ( - VOID - ); - - -/** - Reads the current value of GS Data Segment Register (GS). - - Reads and returns the current value of GS. This function is only available on - IA-32 and X64. - - @return The current value of GS. - -**/ -UINT16 -EFIAPI -AsmReadGs ( - VOID - ); - - -/** - Reads the current value of Stack Segment Register (SS). - - Reads and returns the current value of SS. This function is only available on - IA-32 and X64. - - @return The current value of SS. - -**/ -UINT16 -EFIAPI -AsmReadSs ( - VOID - ); - - -/** - Reads the current value of Task Register (TR). - - Reads and returns the current value of TR. This function is only available on - IA-32 and X64. - - @return The current value of TR. - -**/ -UINT16 -EFIAPI -AsmReadTr ( - VOID - ); - - -/** - Reads the current Global Descriptor Table Register(GDTR) descriptor. - - Reads and returns the current GDTR descriptor and returns it in Gdtr. This - function is only available on IA-32 and X64. - - If Gdtr is NULL, then ASSERT(). - - @param Gdtr Pointer to a GDTR descriptor. - -**/ -VOID -EFIAPI -AsmReadGdtr ( - OUT IA32_DESCRIPTOR *Gdtr - ); - - -/** - Writes the current Global Descriptor Table Register (GDTR) descriptor. - - Writes and the current GDTR descriptor specified by Gdtr. This function is - only available on IA-32 and X64. - - If Gdtr is NULL, then ASSERT(). - - @param Gdtr Pointer to a GDTR descriptor. - -**/ -VOID -EFIAPI -AsmWriteGdtr ( - IN CONST IA32_DESCRIPTOR *Gdtr - ); - - -/** - Reads the current Interrupt Descriptor Table Register(GDTR) descriptor. - - Reads and returns the current IDTR descriptor and returns it in Idtr. This - function is only available on IA-32 and X64. - - If Idtr is NULL, then ASSERT(). - - @param Idtr Pointer to a IDTR descriptor. - -**/ -VOID -EFIAPI -AsmReadIdtr ( - OUT IA32_DESCRIPTOR *Idtr - ); - - -/** - Writes the current Interrupt Descriptor Table Register(GDTR) descriptor. - - Writes the current IDTR descriptor and returns it in Idtr. This function is - only available on IA-32 and X64. - - If Idtr is NULL, then ASSERT(). - - @param Idtr Pointer to a IDTR descriptor. - -**/ -VOID -EFIAPI -AsmWriteIdtr ( - IN CONST IA32_DESCRIPTOR *Idtr - ); - - -/** - Reads the current Local Descriptor Table Register(LDTR) selector. - - Reads and returns the current 16-bit LDTR descriptor value. This function is - only available on IA-32 and X64. - - @return The current selector of LDT. - -**/ -UINT16 -EFIAPI -AsmReadLdtr ( - VOID - ); - - -/** - Writes the current Local Descriptor Table Register (GDTR) selector. - - Writes and the current LDTR descriptor specified by Ldtr. This function is - only available on IA-32 and X64. - - @param Ldtr 16-bit LDTR selector value. - -**/ -VOID -EFIAPI -AsmWriteLdtr ( - IN UINT16 Ldtr - ); - - -/** - Save the current floating point/SSE/SSE2 context to a buffer. - - Saves the current floating point/SSE/SSE2 state to the buffer specified by - Buffer. Buffer must be aligned on a 16-byte boundary. This function is only - available on IA-32 and X64. - - If Buffer is NULL, then ASSERT(). - If Buffer is not aligned on a 16-byte boundary, then ASSERT(). - - @param Buffer Pointer to a buffer to save the floating point/SSE/SSE2 context. - -**/ -VOID -EFIAPI -AsmFxSave ( - OUT IA32_FX_BUFFER *Buffer - ); - - -/** - Restores the current floating point/SSE/SSE2 context from a buffer. - - Restores the current floating point/SSE/SSE2 state from the buffer specified - by Buffer. Buffer must be aligned on a 16-byte boundary. This function is - only available on IA-32 and X64. - - If Buffer is NULL, then ASSERT(). - If Buffer is not aligned on a 16-byte boundary, then ASSERT(). - If Buffer was not saved with AsmFxSave(), then ASSERT(). - - @param Buffer Pointer to a buffer to save the floating point/SSE/SSE2 context. - -**/ -VOID -EFIAPI -AsmFxRestore ( - IN CONST IA32_FX_BUFFER *Buffer - ); - - -/** - Reads the current value of 64-bit MMX Register #0 (MM0). - - Reads and returns the current value of MM0. This function is only available - on IA-32 and X64. - - @return The current value of MM0. - -**/ -UINT64 -EFIAPI -AsmReadMm0 ( - VOID - ); - - -/** - Reads the current value of 64-bit MMX Register #1 (MM1). - - Reads and returns the current value of MM1. This function is only available - on IA-32 and X64. - - @return The current value of MM1. - -**/ -UINT64 -EFIAPI -AsmReadMm1 ( - VOID - ); - - -/** - Reads the current value of 64-bit MMX Register #2 (MM2). - - Reads and returns the current value of MM2. This function is only available - on IA-32 and X64. - - @return The current value of MM2. - -**/ -UINT64 -EFIAPI -AsmReadMm2 ( - VOID - ); - - -/** - Reads the current value of 64-bit MMX Register #3 (MM3). - - Reads and returns the current value of MM3. This function is only available - on IA-32 and X64. - - @return The current value of MM3. - -**/ -UINT64 -EFIAPI -AsmReadMm3 ( - VOID - ); - - -/** - Reads the current value of 64-bit MMX Register #4 (MM4). - - Reads and returns the current value of MM4. This function is only available - on IA-32 and X64. - - @return The current value of MM4. - -**/ -UINT64 -EFIAPI -AsmReadMm4 ( - VOID - ); - - -/** - Reads the current value of 64-bit MMX Register #5 (MM5). - - Reads and returns the current value of MM5. This function is only available - on IA-32 and X64. - - @return The current value of MM5. - -**/ -UINT64 -EFIAPI -AsmReadMm5 ( - VOID - ); - - -/** - Reads the current value of 64-bit MMX Register #6 (MM6). - - Reads and returns the current value of MM6. This function is only available - on IA-32 and X64. - - @return The current value of MM6. - -**/ -UINT64 -EFIAPI -AsmReadMm6 ( - VOID - ); - - -/** - Reads the current value of 64-bit MMX Register #7 (MM7). - - Reads and returns the current value of MM7. This function is only available - on IA-32 and X64. - - @return The current value of MM7. - -**/ -UINT64 -EFIAPI -AsmReadMm7 ( - VOID - ); - - -/** - Writes the current value of 64-bit MMX Register #0 (MM0). - - Writes the current value of MM0. This function is only available on IA32 and - X64. - - @param Value The 64-bit value to write to MM0. - -**/ -VOID -EFIAPI -AsmWriteMm0 ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit MMX Register #1 (MM1). - - Writes the current value of MM1. This function is only available on IA32 and - X64. - - @param Value The 64-bit value to write to MM1. - -**/ -VOID -EFIAPI -AsmWriteMm1 ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit MMX Register #2 (MM2). - - Writes the current value of MM2. This function is only available on IA32 and - X64. - - @param Value The 64-bit value to write to MM2. - -**/ -VOID -EFIAPI -AsmWriteMm2 ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit MMX Register #3 (MM3). - - Writes the current value of MM3. This function is only available on IA32 and - X64. - - @param Value The 64-bit value to write to MM3. - -**/ -VOID -EFIAPI -AsmWriteMm3 ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit MMX Register #4 (MM4). - - Writes the current value of MM4. This function is only available on IA32 and - X64. - - @param Value The 64-bit value to write to MM4. - -**/ -VOID -EFIAPI -AsmWriteMm4 ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit MMX Register #5 (MM5). - - Writes the current value of MM5. This function is only available on IA32 and - X64. - - @param Value The 64-bit value to write to MM5. - -**/ -VOID -EFIAPI -AsmWriteMm5 ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit MMX Register #6 (MM6). - - Writes the current value of MM6. This function is only available on IA32 and - X64. - - @param Value The 64-bit value to write to MM6. - -**/ -VOID -EFIAPI -AsmWriteMm6 ( - IN UINT64 Value - ); - - -/** - Writes the current value of 64-bit MMX Register #7 (MM7). - - Writes the current value of MM7. This function is only available on IA32 and - X64. - - @param Value The 64-bit value to write to MM7. - -**/ -VOID -EFIAPI -AsmWriteMm7 ( - IN UINT64 Value - ); - - -/** - Reads the current value of Time Stamp Counter (TSC). - - Reads and returns the current value of TSC. This function is only available - on IA-32 and X64. - - @return The current value of TSC - -**/ -UINT64 -EFIAPI -AsmReadTsc ( - VOID - ); - - -/** - Reads the current value of a Performance Counter (PMC). - - Reads and returns the current value of performance counter specified by - Index. This function is only available on IA-32 and X64. - - @param Index The 32-bit Performance Counter index to read. - - @return The value of the PMC specified by Index. - -**/ -UINT64 -EFIAPI -AsmReadPmc ( - IN UINT32 Index - ); - - -/** - Sets up a monitor buffer that is used by AsmMwait(). - - Executes a MONITOR instruction with the register state specified by Eax, Ecx - and Edx. Returns Eax. This function is only available on IA-32 and X64. - - @param Eax The value to load into EAX or RAX before executing the MONITOR - instruction. - @param Ecx The value to load into ECX or RCX before executing the MONITOR - instruction. - @param Edx The value to load into EDX or RDX before executing the MONITOR - instruction. - - @return Eax - -**/ -UINTN -EFIAPI -AsmMonitor ( - IN UINTN Eax, - IN UINTN Ecx, - IN UINTN Edx - ); - - -/** - Executes an MWAIT instruction. - - Executes an MWAIT instruction with the register state specified by Eax and - Ecx. Returns Eax. This function is only available on IA-32 and X64. - - @param Eax The value to load into EAX or RAX before executing the MONITOR - instruction. - @param Ecx The value to load into ECX or RCX before executing the MONITOR - instruction. - - @return Eax - -**/ -UINTN -EFIAPI -AsmMwait ( - IN UINTN Eax, - IN UINTN Ecx - ); - - -/** - Executes a WBINVD instruction. - - Executes a WBINVD instruction. This function is only available on IA-32 and - X64. - -**/ -VOID -EFIAPI -AsmWbinvd ( - VOID - ); - - -/** - Executes a INVD instruction. - - Executes a INVD instruction. This function is only available on IA-32 and - X64. - -**/ -VOID -EFIAPI -AsmInvd ( - VOID - ); - - -/** - Flushes a cache line from all the instruction and data caches within the - coherency domain of the CPU. - - Flushed the cache line specified by LinearAddress, and returns LinearAddress. - This function is only available on IA-32 and X64. - - @param LinearAddress The address of the cache line to flush. If the CPU is - in a physical addressing mode, then LinearAddress is a - physical address. If the CPU is in a virtual - addressing mode, then LinearAddress is a virtual - address. - - @return LinearAddress -**/ -VOID * -EFIAPI -AsmFlushCacheLine ( - IN VOID *LinearAddress - ); - - -/** - Enables the 32-bit paging mode on the CPU. - - Enables the 32-bit paging mode on the CPU. CR0, CR3, CR4, and the page tables - must be properly initialized prior to calling this service. This function - assumes the current execution mode is 32-bit protected mode. This function is - only available on IA-32. After the 32-bit paging mode is enabled, control is - transferred to the function specified by EntryPoint using the new stack - specified by NewStack and passing in the parameters specified by Context1 and - Context2. Context1 and Context2 are optional and may be NULL. The function - EntryPoint must never return. - - If the current execution mode is not 32-bit protected mode, then ASSERT(). - If EntryPoint is NULL, then ASSERT(). - If NewStack is NULL, then ASSERT(). - - There are a number of constraints that must be followed before calling this - function: - 1) Interrupts must be disabled. - 2) The caller must be in 32-bit protected mode with flat descriptors. This - means all descriptors must have a base of 0 and a limit of 4GB. - 3) CR0 and CR4 must be compatible with 32-bit protected mode with flat - descriptors. - 4) CR3 must point to valid page tables that will be used once the transition - is complete, and those page tables must guarantee that the pages for this - function and the stack are identity mapped. - - @param EntryPoint A pointer to function to call with the new stack after - paging is enabled. - @param Context1 A pointer to the context to pass into the EntryPoint - function as the first parameter after paging is enabled. - @param Context2 A pointer to the context to pass into the EntryPoint - function as the second parameter after paging is enabled. - @param NewStack A pointer to the new stack to use for the EntryPoint - function after paging is enabled. - -**/ -VOID -EFIAPI -AsmEnablePaging32 ( - IN SWITCH_STACK_ENTRY_POINT EntryPoint, - IN VOID *Context1, OPTIONAL - IN VOID *Context2, OPTIONAL - IN VOID *NewStack - ); - - -/** - Disables the 32-bit paging mode on the CPU. - - Disables the 32-bit paging mode on the CPU and returns to 32-bit protected - mode. This function assumes the current execution mode is 32-paged protected - mode. This function is only available on IA-32. After the 32-bit paging mode - is disabled, control is transferred to the function specified by EntryPoint - using the new stack specified by NewStack and passing in the parameters - specified by Context1 and Context2. Context1 and Context2 are optional and - may be NULL. The function EntryPoint must never return. - - If the current execution mode is not 32-bit paged mode, then ASSERT(). - If EntryPoint is NULL, then ASSERT(). - If NewStack is NULL, then ASSERT(). - - There are a number of constraints that must be followed before calling this - function: - 1) Interrupts must be disabled. - 2) The caller must be in 32-bit paged mode. - 3) CR0, CR3, and CR4 must be compatible with 32-bit paged mode. - 4) CR3 must point to valid page tables that guarantee that the pages for - this function and the stack are identity mapped. - - @param EntryPoint A pointer to function to call with the new stack after - paging is disabled. - @param Context1 A pointer to the context to pass into the EntryPoint - function as the first parameter after paging is disabled. - @param Context2 A pointer to the context to pass into the EntryPoint - function as the second parameter after paging is - disabled. - @param NewStack A pointer to the new stack to use for the EntryPoint - function after paging is disabled. - -**/ -VOID -EFIAPI -AsmDisablePaging32 ( - IN SWITCH_STACK_ENTRY_POINT EntryPoint, - IN VOID *Context1, OPTIONAL - IN VOID *Context2, OPTIONAL - IN VOID *NewStack - ); - - -/** - Enables the 64-bit paging mode on the CPU. - - Enables the 64-bit paging mode on the CPU. CR0, CR3, CR4, and the page tables - must be properly initialized prior to calling this service. This function - assumes the current execution mode is 32-bit protected mode with flat - descriptors. This function is only available on IA-32. After the 64-bit - paging mode is enabled, control is transferred to the function specified by - EntryPoint using the new stack specified by NewStack and passing in the - parameters specified by Context1 and Context2. Context1 and Context2 are - optional and may be 0. The function EntryPoint must never return. - - If the current execution mode is not 32-bit protected mode with flat - descriptors, then ASSERT(). - If EntryPoint is 0, then ASSERT(). - If NewStack is 0, then ASSERT(). - - @param Cs The 16-bit selector to load in the CS before EntryPoint - is called. The descriptor in the GDT that this selector - references must be setup for long mode. - @param EntryPoint The 64-bit virtual address of the function to call with - the new stack after paging is enabled. - @param Context1 The 64-bit virtual address of the context to pass into - the EntryPoint function as the first parameter after - paging is enabled. - @param Context2 The 64-bit virtual address of the context to pass into - the EntryPoint function as the second parameter after - paging is enabled. - @param NewStack The 64-bit virtual address of the new stack to use for - the EntryPoint function after paging is enabled. - -**/ -VOID -EFIAPI -AsmEnablePaging64 ( - IN UINT16 CodeSelector, - IN UINT64 EntryPoint, - IN UINT64 Context1, OPTIONAL - IN UINT64 Context2, OPTIONAL - IN UINT64 NewStack - ); - - -/** - Disables the 64-bit paging mode on the CPU. - - Disables the 64-bit paging mode on the CPU and returns to 32-bit protected - mode. This function assumes the current execution mode is 64-paging mode. - This function is only available on X64. After the 64-bit paging mode is - disabled, control is transferred to the function specified by EntryPoint - using the new stack specified by NewStack and passing in the parameters - specified by Context1 and Context2. Context1 and Context2 are optional and - may be 0. The function EntryPoint must never return. - - If the current execution mode is not 64-bit paged mode, then ASSERT(). - If EntryPoint is 0, then ASSERT(). - If NewStack is 0, then ASSERT(). - - @param Cs The 16-bit selector to load in the CS before EntryPoint - is called. The descriptor in the GDT that this selector - references must be setup for 32-bit protected mode. - @param EntryPoint The 64-bit virtual address of the function to call with - the new stack after paging is disabled. - @param Context1 The 64-bit virtual address of the context to pass into - the EntryPoint function as the first parameter after - paging is disabled. - @param Context2 The 64-bit virtual address of the context to pass into - the EntryPoint function as the second parameter after - paging is disabled. - @param NewStack The 64-bit virtual address of the new stack to use for - the EntryPoint function after paging is disabled. - -**/ -VOID -EFIAPI -AsmDisablePaging64 ( - IN UINT16 CodeSelector, - IN UINT32 EntryPoint, - IN UINT32 Context1, OPTIONAL - IN UINT32 Context2, OPTIONAL - IN UINT32 NewStack - ); - - -// -// 16-bit thunking services -// - -/** - Retrieves the properties for 16-bit thunk functions. - - Computes the size of the buffer and stack below 1MB required to use the - AsmPrepareThunk16(), AsmThunk16() and AsmPrepareAndThunk16() functions. This - buffer size is returned in RealModeBufferSize, and the stack size is returned - in ExtraStackSize. If parameters are passed to the 16-bit real mode code, - then the actual minimum stack size is ExtraStackSize plus the maximum number - of bytes that need to be passed to the 16-bit real mode code. - - If RealModeBufferSize is NULL, then ASSERT(). - If ExtraStackSize is NULL, then ASSERT(). - - @param RealModeBufferSize A pointer to the size of the buffer below 1MB - required to use the 16-bit thunk functions. - @param ExtraStackSize A pointer to the extra size of stack below 1MB - that the 16-bit thunk functions require for - temporary storage in the transition to and from - 16-bit real mode. - -**/ -VOID -EFIAPI -AsmGetThunk16Properties ( - OUT UINT32 *RealModeBufferSize, - OUT UINT32 *ExtraStackSize - ); - - -/** - Prepares all structures a code required to use AsmThunk16(). - - Prepares all structures and code required to use AsmThunk16(). - - If ThunkContext is NULL, then ASSERT(). - - @param ThunkContext A pointer to the context structure that describes the - 16-bit real mode code to call. - -**/ -VOID -EFIAPI -AsmPrepareThunk16 ( - OUT THUNK_CONTEXT *ThunkContext - ); - - -/** - Transfers control to a 16-bit real mode entry point and returns the results. - - Transfers control to a 16-bit real mode entry point and returns the results. - AsmPrepareThunk16() must be called with ThunkContext before this function is - used. - - If ThunkContext is NULL, then ASSERT(). - If AsmPrepareThunk16() was not previously called with ThunkContext, then ASSERT(). - - @param ThunkContext A pointer to the context structure that describes the - 16-bit real mode code to call. - -**/ -VOID -EFIAPI -AsmThunk16 ( - IN OUT THUNK_CONTEXT *ThunkContext - ); - - -/** - Prepares all structures and code for a 16-bit real mode thunk, transfers - control to a 16-bit real mode entry point, and returns the results. - - Prepares all structures and code for a 16-bit real mode thunk, transfers - control to a 16-bit real mode entry point, and returns the results. If the - caller only need to perform a single 16-bit real mode thunk, then this - service should be used. If the caller intends to make more than one 16-bit - real mode thunk, then it is more efficient if AsmPrepareThunk16() is called - once and AsmThunk16() can be called for each 16-bit real mode thunk. - - If ThunkContext is NULL, then ASSERT(). - - @param ThunkContext A pointer to the context structure that describes the - 16-bit real mode code to call. - -**/ -VOID -EFIAPI -AsmPrepareAndThunk16 ( - IN OUT THUNK_CONTEXT *ThunkContext - ); - -#else - -#endif - -#endif - - +/** @file + Memory-only library functions with no library constructor/destructor + + Copyright (c) 2006 - 2007, Intel Corporation + All rights reserved. This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __BASE_LIB__ +#define __BASE_LIB__ + +// +// Definitions for architecture specific types +// These include SPIN_LOCK and BASE_LIBRARY_JUMP_BUFFER +// + +// +// SPIN_LOCK +// +typedef volatile UINTN SPIN_LOCK; + +#if defined (MDE_CPU_IA32) +// +// IA32 context buffer used by SetJump() and LongJump() +// +typedef struct { + UINT32 Ebx; + UINT32 Esi; + UINT32 Edi; + UINT32 Ebp; + UINT32 Esp; + UINT32 Eip; +} BASE_LIBRARY_JUMP_BUFFER; + +#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 4 + +#elif defined (MDE_CPU_IPF) + +// +// IPF context buffer used by SetJump() and LongJump() +// +typedef struct { + UINT64 F2[2]; + UINT64 F3[2]; + UINT64 F4[2]; + UINT64 F5[2]; + UINT64 F16[2]; + UINT64 F17[2]; + UINT64 F18[2]; + UINT64 F19[2]; + UINT64 F20[2]; + UINT64 F21[2]; + UINT64 F22[2]; + UINT64 F23[2]; + UINT64 F24[2]; + UINT64 F25[2]; + UINT64 F26[2]; + UINT64 F27[2]; + UINT64 F28[2]; + UINT64 F29[2]; + UINT64 F30[2]; + UINT64 F31[2]; + UINT64 R4; + UINT64 R5; + UINT64 R6; + UINT64 R7; + UINT64 SP; + UINT64 BR0; + UINT64 BR1; + UINT64 BR2; + UINT64 BR3; + UINT64 BR4; + UINT64 BR5; + UINT64 InitialUNAT; + UINT64 AfterSpillUNAT; + UINT64 PFS; + UINT64 BSP; + UINT64 Predicates; + UINT64 LoopCount; + UINT64 FPSR; +} BASE_LIBRARY_JUMP_BUFFER; + +#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 0x10 + +#elif defined (MDE_CPU_X64) +// +// X64 context buffer used by SetJump() and LongJump() +// +typedef struct { + UINT64 Rbx; + UINT64 Rsp; + UINT64 Rbp; + UINT64 Rdi; + UINT64 Rsi; + UINT64 R12; + UINT64 R13; + UINT64 R14; + UINT64 R15; + UINT64 Rip; +} BASE_LIBRARY_JUMP_BUFFER; + +#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 8 + +#elif defined (MDE_CPU_EBC) +// +// EBC context buffer used by SetJump() and LongJump() +// +typedef struct { + UINT64 R0; + UINT64 R1; + UINT64 R2; + UINT64 R3; + UINT64 IP; +} BASE_LIBRARY_JUMP_BUFFER; + +#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 8 + +#else +#error Unknown Processor Type +#endif + +// +// String Services +// + +/** + Copies one Null-terminated Unicode string to another Null-terminated Unicode + string and returns the new Unicode string. + + This function copies the contents of the Unicode string Source to the Unicode + string Destination, and returns Destination. If Source and Destination + overlap, then the results are undefined. + + If Destination is NULL, then ASSERT(). + If Destination is not aligned on a 16-bit boundary, then ASSERT(). + If Source is NULL, then ASSERT(). + If Source is not aligned on a 16-bit boundary, then ASSERT(). + If Source and Destination overlap, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and Source contains more than + PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + + @param Destination Pointer to a Null-terminated Unicode string. + @param Source Pointer to a Null-terminated Unicode string. + + @return Destiantion + +**/ +CHAR16 * +EFIAPI +StrCpy ( + OUT CHAR16 *Destination, + IN CONST CHAR16 *Source + ); + + +/** + Copies one Null-terminated Unicode string with a maximum length to another + Null-terminated Unicode string with a maximum length and returns the new + Unicode string. + + This function copies the contents of the Unicode string Source to the Unicode + string Destination, and returns Destination. At most, Length Unicode + characters are copied from Source to Destination. If Length is 0, then + Destination is returned unmodified. If Length is greater that the number of + Unicode characters in Source, then Destination is padded with Null Unicode + characters. If Source and Destination overlap, then the results are + undefined. + + If Length > 0 and Destination is NULL, then ASSERT(). + If Length > 0 and Destination is not aligned on a 16-bit boundary, then ASSERT(). + If Length > 0 and Source is NULL, then ASSERT(). + If Length > 0 and Source is not aligned on a 16-bit bounadry, then ASSERT(). + If Source and Destination overlap, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and Source contains more than + PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + + @param Destination Pointer to a Null-terminated Unicode string. + @param Source Pointer to a Null-terminated Unicode string. + @param Length Maximum number of Unicode characters to copy. + + @return Destination + +**/ +CHAR16 * +EFIAPI +StrnCpy ( + OUT CHAR16 *Destination, + IN CONST CHAR16 *Source, + IN UINTN Length + ); + + +/** + Returns the length of a Null-terminated Unicode string. + + This function returns the number of Unicode characters in the Null-terminated + Unicode string specified by String. + + If String is NULL, then ASSERT(). + If String is not aligned on a 16-bit boundary, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and String contains more than + PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + + @param String Pointer to a Null-terminated Unicode string. + + @return The length of String. + +**/ +UINTN +EFIAPI +StrLen ( + IN CONST CHAR16 *String + ); + + +/** + Returns the size of a Null-terminated Unicode string in bytes, including the + Null terminator. + + This function returns the size, in bytes, of the Null-terminated Unicode + string specified by String. + + If String is NULL, then ASSERT(). + If String is not aligned on a 16-bit boundary, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and String contains more than + PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + + @param String Pointer to a Null-terminated Unicode string. + + @return The size of String. + +**/ +UINTN +EFIAPI +StrSize ( + IN CONST CHAR16 *String + ); + + +/** + Compares two Null-terminated Unicode strings, and returns the difference + between the first mismatched Unicode characters. + + This function compares the Null-terminated Unicode string FirstString to the + Null-terminated Unicode string SecondString. If FirstString is identical to + SecondString, then 0 is returned. Otherwise, the value returned is the first + mismatched Unicode character in SecondString subtracted from the first + mismatched Unicode character in FirstString. + + If FirstString is NULL, then ASSERT(). + If FirstString is not aligned on a 16-bit boundary, then ASSERT(). + If SecondString is NULL, then ASSERT(). + If SecondString is not aligned on a 16-bit boundary, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and FirstString contains more + than PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and SecondString contains more + than PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + + @param FirstString Pointer to a Null-terminated Unicode string. + @param SecondString Pointer to a Null-terminated Unicode string. + + @retval 0 FirstString is identical to SecondString. + @retval !=0 FirstString is not identical to SecondString. + +**/ +INTN +EFIAPI +StrCmp ( + IN CONST CHAR16 *FirstString, + IN CONST CHAR16 *SecondString + ); + + +/** + Compares two Null-terminated Unicode strings with maximum lengths, and + returns the difference between the first mismatched Unicode characters. + + This function compares the Null-terminated Unicode string FirstString to the + Null-terminated Unicode string SecondString. At most, Length Unicode + characters will be compared. If Length is 0, then 0 is returned. If + FirstString is identical to SecondString, then 0 is returned. Otherwise, the + value returned is the first mismatched Unicode character in SecondString + subtracted from the first mismatched Unicode character in FirstString. + + If Length > 0 and FirstString is NULL, then ASSERT(). + If Length > 0 and FirstString is not aligned on a 16-bit bounadary, then ASSERT(). + If Length > 0 and SecondString is NULL, then ASSERT(). + If Length > 0 and SecondString is not aligned on a 16-bit bounadary, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and FirstString contains more + than PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and SecondString contains more + than PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + + @param FirstString Pointer to a Null-terminated Unicode string. + @param SecondString Pointer to a Null-terminated Unicode string. + @param Length Maximum number of Unicode characters to compare. + + @retval 0 FirstString is identical to SecondString. + @retval !=0 FirstString is not identical to SecondString. + +**/ +INTN +EFIAPI +StrnCmp ( + IN CONST CHAR16 *FirstString, + IN CONST CHAR16 *SecondString, + IN UINTN Length + ); + + +/** + Concatenates one Null-terminated Unicode string to another Null-terminated + Unicode string, and returns the concatenated Unicode string. + + This function concatenates two Null-terminated Unicode strings. The contents + of Null-terminated Unicode string Source are concatenated to the end of + Null-terminated Unicode string Destination. The Null-terminated concatenated + Unicode String is returned. If Source and Destination overlap, then the + results are undefined. + + If Destination is NULL, then ASSERT(). + If Destination is not aligned on a 16-bit bounadary, then ASSERT(). + If Source is NULL, then ASSERT(). + If Source is not aligned on a 16-bit bounadary, then ASSERT(). + If Source and Destination overlap, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and Destination contains more + than PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and Source contains more than + PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and concatenating Destination + and Source results in a Unicode string with more than + PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + + @param Destination Pointer to a Null-terminated Unicode string. + @param Source Pointer to a Null-terminated Unicode string. + + @return Destination + +**/ +CHAR16 * +EFIAPI +StrCat ( + IN OUT CHAR16 *Destination, + IN CONST CHAR16 *Source + ); + + +/** + Concatenates one Null-terminated Unicode string with a maximum length to the + end of another Null-terminated Unicode string, and returns the concatenated + Unicode string. + + This function concatenates two Null-terminated Unicode strings. The contents + of Null-terminated Unicode string Source are concatenated to the end of + Null-terminated Unicode string Destination, and Destination is returned. At + most, Length Unicode characters are concatenated from Source to the end of + Destination, and Destination is always Null-terminated. If Length is 0, then + Destination is returned unmodified. If Source and Destination overlap, then + the results are undefined. + + If Destination is NULL, then ASSERT(). + If Length > 0 and Destination is not aligned on a 16-bit boundary, then ASSERT(). + If Length > 0 and Source is NULL, then ASSERT(). + If Length > 0 and Source is not aligned on a 16-bit boundary, then ASSERT(). + If Source and Destination overlap, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and Destination contains more + than PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and Source contains more than + PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and concatenating Destination + and Source results in a Unicode string with more than + PcdMaximumUnicodeStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + + @param Destination Pointer to a Null-terminated Unicode string. + @param Source Pointer to a Null-terminated Unicode string. + @param Length Maximum number of Unicode characters to concatenate from + Source. + + @return Destination + +**/ +CHAR16 * +EFIAPI +StrnCat ( + IN OUT CHAR16 *Destination, + IN CONST CHAR16 *Source, + IN UINTN Length + ); + +/** + Returns the first occurance of a Null-terminated Unicode sub-string + in a Null-terminated Unicode string. + + This function scans the contents of the Null-terminated Unicode string + specified by String and returns the first occurrence of SearchString. + If SearchString is not found in String, then NULL is returned. If + the length of SearchString is zero, then String is + returned. + + If String is NULL, then ASSERT(). + If String is not aligned on a 16-bit boundary, then ASSERT(). + If SearchString is NULL, then ASSERT(). + If SearchString is not aligned on a 16-bit boundary, then ASSERT(). + + If PcdMaximumUnicodeStringLength is not zero, and SearchString + or String contains more than PcdMaximumUnicodeStringLength Unicode + characters not including the Null-terminator, then ASSERT(). + + @param String Pointer to a Null-terminated Unicode string. + @param SearchString Pointer to a Null-terminated Unicode string to search for. + + @retval NULL If the SearchString does not appear in String. + @retval !NULL If there is a match. + +**/ +CHAR16 * +EFIAPI +StrStr ( + IN CONST CHAR16 *String, + IN CONST CHAR16 *SearchString + ); + +/** + Convert a Null-terminated Unicode decimal string to a value of + type UINTN. + + This function returns a value of type UINTN by interpreting the contents + of the Unicode string specified by String as a decimal number. The format + of the input Unicode string String is: + + [spaces] [decimal digits]. + + The valid decimal digit character is in the range [0-9]. The + function will ignore the pad space, which includes spaces or + tab characters, before [decimal digits]. The running zero in the + beginning of [decimal digits] will be ignored. Then, the function + stops at the first character that is a not a valid decimal character + or a Null-terminator, whichever one comes first. + + If String is NULL, then ASSERT(). + If String is not aligned in a 16-bit boundary, then ASSERT(). + If String has only pad spaces, then 0 is returned. + If String has no pad spaces or valid decimal digits, + then 0 is returned. + If the number represented by String overflows according + to the range defined by UINTN, then ASSERT(). + + If PcdMaximumUnicodeStringLength is not zero, and String contains + more than PcdMaximumUnicodeStringLength Unicode characters not including + the Null-terminator, then ASSERT(). + + @param String Pointer to a Null-terminated Unicode string. + + @retval UINTN + +**/ +UINTN +EFIAPI +StrDecimalToUintn ( + IN CONST CHAR16 *String + ); + +/** + Convert a Null-terminated Unicode decimal string to a value of + type UINT64. + + This function returns a value of type UINT64 by interpreting the contents + of the Unicode string specified by String as a decimal number. The format + of the input Unicode string String is: + + [spaces] [decimal digits]. + + The valid decimal digit character is in the range [0-9]. The + function will ignore the pad space, which includes spaces or + tab characters, before [decimal digits]. The running zero in the + beginning of [decimal digits] will be ignored. Then, the function + stops at the first character that is a not a valid decimal character + or a Null-terminator, whichever one comes first. + + If String is NULL, then ASSERT(). + If String is not aligned in a 16-bit boundary, then ASSERT(). + If String has only pad spaces, then 0 is returned. + If String has no pad spaces or valid decimal digits, + then 0 is returned. + If the number represented by String overflows according + to the range defined by UINT64, then ASSERT(). + + If PcdMaximumUnicodeStringLength is not zero, and String contains + more than PcdMaximumUnicodeStringLength Unicode characters not including + the Null-terminator, then ASSERT(). + + @param String Pointer to a Null-terminated Unicode string. + + @retval UINT64 + +**/ +UINT64 +EFIAPI +StrDecimalToUint64 ( + IN CONST CHAR16 *String + ); + + +/** + Convert a Null-terminated Unicode hexadecimal string to a value of type UINTN. + + This function returns a value of type UINTN by interpreting the contents + of the Unicode string specified by String as a hexadecimal number. + The format of the input Unicode string String is: + + [spaces][zeros][x][hexadecimal digits]. + + The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F]. + The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix. + If "x" appears in the input string, it must be prefixed with at least one 0. + The function will ignore the pad space, which includes spaces or tab characters, + before [zeros], [x] or [hexadecimal digit]. The running zero before [x] or + [hexadecimal digit] will be ignored. Then, the decoding starts after [x] or the + first valid hexadecimal digit. Then, the function stops at the first character that is + a not a valid hexadecimal character or NULL, whichever one comes first. + + If String is NULL, then ASSERT(). + If String is not aligned in a 16-bit boundary, then ASSERT(). + If String has only pad spaces, then zero is returned. + If String has no leading pad spaces, leading zeros or valid hexadecimal digits, + then zero is returned. + If the number represented by String overflows according to the range defined by + UINTN, then ASSERT(). + + If PcdMaximumUnicodeStringLength is not zero, and String contains more than + PcdMaximumUnicodeStringLength Unicode characters not including the Null-terminator, + then ASSERT(). + + @param String Pointer to a Null-terminated Unicode string. + + @retval UINTN + +**/ +UINTN +EFIAPI +StrHexToUintn ( + IN CONST CHAR16 *String + ); + + +/** + Convert a Null-terminated Unicode hexadecimal string to a value of type UINT64. + + This function returns a value of type UINT64 by interpreting the contents + of the Unicode string specified by String as a hexadecimal number. + The format of the input Unicode string String is + + [spaces][zeros][x][hexadecimal digits]. + + The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F]. + The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix. + If "x" appears in the input string, it must be prefixed with at least one 0. + The function will ignore the pad space, which includes spaces or tab characters, + before [zeros], [x] or [hexadecimal digit]. The running zero before [x] or + [hexadecimal digit] will be ignored. Then, the decoding starts after [x] or the + first valid hexadecimal digit. Then, the function stops at the first character that is + a not a valid hexadecimal character or NULL, whichever one comes first. + + If String is NULL, then ASSERT(). + If String is not aligned in a 16-bit boundary, then ASSERT(). + If String has only pad spaces, then zero is returned. + If String has no leading pad spaces, leading zeros or valid hexadecimal digits, + then zero is returned. + If the number represented by String overflows according to the range defined by + UINT64, then ASSERT(). + + If PcdMaximumUnicodeStringLength is not zero, and String contains more than + PcdMaximumUnicodeStringLength Unicode characters not including the Null-terminator, + then ASSERT(). + + @param String Pointer to a Null-terminated Unicode string. + + @retval UINT64 + +**/ +UINT64 +EFIAPI +StrHexToUint64 ( + IN CONST CHAR16 *String + ); + +/** + Convert a nibble in the low 4 bits of a byte to a Unicode hexadecimal character. + + This function converts a nibble in the low 4 bits of a byte to a Unicode hexadecimal + character For example, the nibble 0x01 and 0x0A will converted to L'1' and L'A' + respectively. + + The upper nibble in the input byte will be masked off. + + @param Nibble The nibble which is in the low 4 bits of the input byte. + + @retval CHAR16 The Unicode hexadecimal character. + +**/ +CHAR16 +EFIAPI +NibbleToHexChar ( + IN UINT8 Nibble + ) +; + +/** + Convert binary buffer to a Unicode String in a specified sequence. + + This function converts bytes in the binary Buffer Buf to a Unicode String Str. + Each byte will be represented by two Unicode characters. For example, byte 0xA1 will + be converted into two Unicode character L'A' and L'1'. In the output String, the Unicode Character + for the Most Significant Nibble will be put before the Unicode Character for the Least Significant + Nibble. The output string for the buffer containing a single byte 0xA1 will be L"A1". + For a buffer with multiple bytes, the Unicode character produced by the first byte will be put into the + the last character in the output string. The one next to first byte will be put into the + character before the last character. This rules applies to the rest of the bytes. The Unicode + character by the last byte will be put into the first character in the output string. For example, + the input buffer for a 64-bits unsigned integrer 0x12345678abcdef1234 will be converted to + a Unicode string equal to L"12345678abcdef1234". + + @param String On input, String is pointed to the buffer allocated for the convertion. + @param StringLen The Length of String buffer to hold the output String. The length must include the tailing '\0' character. + The StringLen required to convert a N bytes Buffer will be a least equal to or greater + than 2*N + 1. + @param Buffer The pointer to a input buffer. + @param BufferSizeInBytes Lenth in bytes of the input buffer. + + + @retval EFI_SUCCESS The convertion is successfull. All bytes in Buffer has been convert to the corresponding + Unicode character and placed into the right place in String. + @retval EFI_BUFFER_TOO_SMALL StringSizeInBytes is smaller than 2 * N + 1the number of bytes required to + complete the convertion. +**/ +RETURN_STATUS +EFIAPI +BufToHexString ( + IN OUT CHAR16 *String, + IN OUT UINTN *StringLen, + IN CONST UINT8 *Buffer, + IN UINTN BufferSizeInBytes + ) +; + + +/** + Convert a Unicode string consisting of hexadecimal characters to a output byte buffer. + + This function converts a Unicode string consisting of characters in the range of Hexadecimal + character (L'0' to L'9', L'A' to L'F' and L'a' to L'f') to a output byte buffer. The function will stop + at the first non-hexadecimal character or the NULL character. The convertion process can be + simply viewed as the reverse operations defined by BufToHexString. Two Unicode characters will be + converted into one byte. The first Unicode character represents the Most Significant Nibble and the + second Unicode character represents the Least Significant Nibble in the output byte. + The first pair of Unicode characters represents the last byte in the output buffer. The second pair of Unicode + characters represent the the byte preceding the last byte. This rule applies to the rest pairs of bytes. + The last pair represent the first byte in the output buffer. + + For example, a Unciode String L"12345678" will be converted into a buffer wil the following bytes + (first byte is the byte in the lowest memory address): "0x78, 0x56, 0x34, 0x12". + + If String has N valid hexadecimal characters for conversion, the caller must make sure Buffer is at least + N/2 (if N is even) or (N+1)/2 (if N if odd) bytes. + + @param Buffer The output buffer allocated by the caller. + @param BufferSizeInBytes On input, the size in bytes of Buffer. On output, it is updated to + contain the size of the Buffer which is actually used for the converstion. + For Unicode string with 2*N hexadecimal characters (not including the + tailing NULL character), N bytes of Buffer will be used for the output. + @param String The input hexadecimal string. + @param ConvertedStrLen The number of hexadecimal characters used to produce content in output + buffer Buffer. + + @retval RETURN_BUFFER_TOO_SMALL The input BufferSizeInBytes is too small to hold the output. BufferSizeInBytes + will be updated to the size required for the converstion. + @retval RETURN_SUCCESS The convertion is successful or the first Unicode character from String + is hexadecimal. If ConvertedStrLen is not NULL, it is updated + to the number of hexadecimal character used for the converstion. +**/ +RETURN_STATUS +EFIAPI +HexStringToBuf ( + OUT UINT8 *Buffer, + IN OUT UINTN *BufferSizeInBytes, + IN CONST CHAR16 *String, + OUT UINTN *ConvertedStrLen OPTIONAL + ) +; + + +/** + Test if a Unicode character is a hexadecimal digit. If true, the input + Unicode character is converted to a byte. + + This function tests if a Unicode character is a hexadecimal digit. If true, the input + Unicode character is converted to a byte. For example, Unicode character + L'A' will be converted to 0x0A. + + If Digit is NULL, then ASSERT. + + @retval TRUE Char is in the range of Hexadecimal number. Digit is updated + to the byte value of the number. + @retval FALSE Char is not in the range of Hexadecimal number. Digit is keep + intact. + +**/ +BOOLEAN +EFIAPI +IsHexDigit ( + OUT UINT8 *Digit, + IN CHAR16 Char + ) +; + +/** + Convert one Null-terminated Unicode string to a Null-terminated + ASCII string and returns the ASCII string. + + This function converts the content of the Unicode string Source + to the ASCII string Destination by copying the lower 8 bits of + each Unicode character. It returns Destination. + + If any Unicode characters in Source contain non-zero value in + the upper 8 bits, then ASSERT(). + + If Destination is NULL, then ASSERT(). + If Source is NULL, then ASSERT(). + If Source is not aligned on a 16-bit boundary, then ASSERT(). + If Source and Destination overlap, then ASSERT(). + + If PcdMaximumUnicodeStringLength is not zero, and Source contains + more than PcdMaximumUnicodeStringLength Unicode characters not including + the Null-terminator, then ASSERT(). + + If PcdMaximumAsciiStringLength is not zero, and Source contains more + than PcdMaximumAsciiStringLength Unicode characters not including the + Null-terminator, then ASSERT(). + + @param Source Pointer to a Null-terminated Unicode string. + @param Destination Pointer to a Null-terminated ASCII string. + + @return Destination + +**/ +CHAR8 * +EFIAPI +UnicodeStrToAsciiStr ( + IN CONST CHAR16 *Source, + OUT CHAR8 *Destination + ); + + +/** + Copies one Null-terminated ASCII string to another Null-terminated ASCII + string and returns the new ASCII string. + + This function copies the contents of the ASCII string Source to the ASCII + string Destination, and returns Destination. If Source and Destination + overlap, then the results are undefined. + + If Destination is NULL, then ASSERT(). + If Source is NULL, then ASSERT(). + If Source and Destination overlap, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and Source contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + + @param Destination Pointer to a Null-terminated ASCII string. + @param Source Pointer to a Null-terminated ASCII string. + + @return Destination + +**/ +CHAR8 * +EFIAPI +AsciiStrCpy ( + OUT CHAR8 *Destination, + IN CONST CHAR8 *Source + ); + + +/** + Copies one Null-terminated ASCII string with a maximum length to another + Null-terminated ASCII string with a maximum length and returns the new ASCII + string. + + This function copies the contents of the ASCII string Source to the ASCII + string Destination, and returns Destination. At most, Length ASCII characters + are copied from Source to Destination. If Length is 0, then Destination is + returned unmodified. If Length is greater that the number of ASCII characters + in Source, then Destination is padded with Null ASCII characters. If Source + and Destination overlap, then the results are undefined. + + If Destination is NULL, then ASSERT(). + If Source is NULL, then ASSERT(). + If Source and Destination overlap, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero, and Source contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + + @param Destination Pointer to a Null-terminated ASCII string. + @param Source Pointer to a Null-terminated ASCII string. + @param Length Maximum number of ASCII characters to copy. + + @return Destination + +**/ +CHAR8 * +EFIAPI +AsciiStrnCpy ( + OUT CHAR8 *Destination, + IN CONST CHAR8 *Source, + IN UINTN Length + ); + + +/** + Returns the length of a Null-terminated ASCII string. + + This function returns the number of ASCII characters in the Null-terminated + ASCII string specified by String. + + If Length > 0 and Destination is NULL, then ASSERT(). + If Length > 0 and Source is NULL, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and String contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + + @param String Pointer to a Null-terminated ASCII string. + + @return The length of String. + +**/ +UINTN +EFIAPI +AsciiStrLen ( + IN CONST CHAR8 *String + ); + + +/** + Returns the size of a Null-terminated ASCII string in bytes, including the + Null terminator. + + This function returns the size, in bytes, of the Null-terminated ASCII string + specified by String. + + If String is NULL, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and String contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + + @param String Pointer to a Null-terminated ASCII string. + + @return The size of String. + +**/ +UINTN +EFIAPI +AsciiStrSize ( + IN CONST CHAR8 *String + ); + + +/** + Compares two Null-terminated ASCII strings, and returns the difference + between the first mismatched ASCII characters. + + This function compares the Null-terminated ASCII string FirstString to the + Null-terminated ASCII string SecondString. If FirstString is identical to + SecondString, then 0 is returned. Otherwise, the value returned is the first + mismatched ASCII character in SecondString subtracted from the first + mismatched ASCII character in FirstString. + + If FirstString is NULL, then ASSERT(). + If SecondString is NULL, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and FirstString contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and SecondString contains more + than PcdMaximumAsciiStringLength ASCII characters not including the + Null-terminator, then ASSERT(). + + @param FirstString Pointer to a Null-terminated ASCII string. + @param SecondString Pointer to a Null-terminated ASCII string. + + @retval 0 FirstString is identical to SecondString. + @retval !=0 FirstString is not identical to SecondString. + +**/ +INTN +EFIAPI +AsciiStrCmp ( + IN CONST CHAR8 *FirstString, + IN CONST CHAR8 *SecondString + ); + + +/** + Performs a case insensitive comparison of two Null-terminated ASCII strings, + and returns the difference between the first mismatched ASCII characters. + + This function performs a case insensitive comparison of the Null-terminated + ASCII string FirstString to the Null-terminated ASCII string SecondString. If + FirstString is identical to SecondString, then 0 is returned. Otherwise, the + value returned is the first mismatched lower case ASCII character in + SecondString subtracted from the first mismatched lower case ASCII character + in FirstString. + + If FirstString is NULL, then ASSERT(). + If SecondString is NULL, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and FirstString contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and SecondString contains more + than PcdMaximumAsciiStringLength ASCII characters not including the + Null-terminator, then ASSERT(). + + @param FirstString Pointer to a Null-terminated ASCII string. + @param SecondString Pointer to a Null-terminated ASCII string. + + @retval 0 FirstString is identical to SecondString using case insensitive + comparisons. + @retval !=0 FirstString is not identical to SecondString using case + insensitive comparisons. + +**/ +INTN +EFIAPI +AsciiStriCmp ( + IN CONST CHAR8 *FirstString, + IN CONST CHAR8 *SecondString + ); + + +/** + Compares two Null-terminated ASCII strings with maximum lengths, and returns + the difference between the first mismatched ASCII characters. + + This function compares the Null-terminated ASCII string FirstString to the + Null-terminated ASCII string SecondString. At most, Length ASCII characters + will be compared. If Length is 0, then 0 is returned. If FirstString is + identical to SecondString, then 0 is returned. Otherwise, the value returned + is the first mismatched ASCII character in SecondString subtracted from the + first mismatched ASCII character in FirstString. + + If Length > 0 and FirstString is NULL, then ASSERT(). + If Length > 0 and SecondString is NULL, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and FirstString contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and SecondString contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + + @param FirstString Pointer to a Null-terminated ASCII string. + @param SecondString Pointer to a Null-terminated ASCII string. + @param Length Maximum number of ASCII characters for compare. + + @retval 0 FirstString is identical to SecondString. + @retval !=0 FirstString is not identical to SecondString. + +**/ +INTN +EFIAPI +AsciiStrnCmp ( + IN CONST CHAR8 *FirstString, + IN CONST CHAR8 *SecondString, + IN UINTN Length + ); + + +/** + Concatenates one Null-terminated ASCII string to another Null-terminated + ASCII string, and returns the concatenated ASCII string. + + This function concatenates two Null-terminated ASCII strings. The contents of + Null-terminated ASCII string Source are concatenated to the end of Null- + terminated ASCII string Destination. The Null-terminated concatenated ASCII + String is returned. + + If Destination is NULL, then ASSERT(). + If Source is NULL, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and Destination contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and Source contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + If PcdMaximumAsciiStringLength is not zero and concatenating Destination and + Source results in a ASCII string with more than PcdMaximumAsciiStringLength + ASCII characters, then ASSERT(). + + @param Destination Pointer to a Null-terminated ASCII string. + @param Source Pointer to a Null-terminated ASCII string. + + @return Destination + +**/ +CHAR8 * +EFIAPI +AsciiStrCat ( + IN OUT CHAR8 *Destination, + IN CONST CHAR8 *Source + ); + + +/** + Concatenates one Null-terminated ASCII string with a maximum length to the + end of another Null-terminated ASCII string, and returns the concatenated + ASCII string. + + This function concatenates two Null-terminated ASCII strings. The contents + of Null-terminated ASCII string Source are concatenated to the end of Null- + terminated ASCII string Destination, and Destination is returned. At most, + Length ASCII characters are concatenated from Source to the end of + Destination, and Destination is always Null-terminated. If Length is 0, then + Destination is returned unmodified. If Source and Destination overlap, then + the results are undefined. + + If Length > 0 and Destination is NULL, then ASSERT(). + If Length > 0 and Source is NULL, then ASSERT(). + If Source and Destination overlap, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero, and Destination contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + If PcdMaximumAsciiStringLength is not zero, and Source contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + If PcdMaximumAsciiStringLength is not zero, and concatenating Destination and + Source results in a ASCII string with more than PcdMaximumAsciiStringLength + ASCII characters not including the Null-terminator, then ASSERT(). + + @param Destination Pointer to a Null-terminated ASCII string. + @param Source Pointer to a Null-terminated ASCII string. + @param Length Maximum number of ASCII characters to concatenate from + Source. + + @return Destination + +**/ +CHAR8 * +EFIAPI +AsciiStrnCat ( + IN OUT CHAR8 *Destination, + IN CONST CHAR8 *Source, + IN UINTN Length + ); + + +/** + Returns the first occurance of a Null-terminated ASCII sub-string + in a Null-terminated ASCII string. + + This function scans the contents of the ASCII string specified by String + and returns the first occurrence of SearchString. If SearchString is not + found in String, then NULL is returned. If the length of SearchString is zero, + then String is returned. + + If String is NULL, then ASSERT(). + If SearchString is NULL, then ASSERT(). + + If PcdMaximumAsciiStringLength is not zero, and SearchString or + String contains more than PcdMaximumAsciiStringLength Unicode characters + not including the Null-terminator, then ASSERT(). + + @param String Pointer to a Null-terminated ASCII string. + @param SearchString Pointer to a Null-terminated ASCII string to search for. + + @retval NULL If the SearchString does not appear in String. + @retval !NULL If there is a match. + +**/ +CHAR8 * +EFIAPI +AsciiStrStr ( + IN CONST CHAR8 *String, + IN CONST CHAR8 *SearchString + ); + + +/** + Convert a Null-terminated ASCII decimal string to a value of type + UINTN. + + This function returns a value of type UINTN by interpreting the contents + of the ASCII string String as a decimal number. The format of the input + ASCII string String is: + + [spaces] [decimal digits]. + + The valid decimal digit character is in the range [0-9]. The function will + ignore the pad space, which includes spaces or tab characters, before the digits. + The running zero in the beginning of [decimal digits] will be ignored. Then, the + function stops at the first character that is a not a valid decimal character or + Null-terminator, whichever on comes first. + + If String has only pad spaces, then 0 is returned. + If String has no pad spaces or valid decimal digits, then 0 is returned. + If the number represented by String overflows according to the range defined by + UINTN, then ASSERT(). + If String is NULL, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero, and String contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + + @param String Pointer to a Null-terminated ASCII string. + + @retval UINTN + +**/ +UINTN +EFIAPI +AsciiStrDecimalToUintn ( + IN CONST CHAR8 *String + ); + + +/** + Convert a Null-terminated ASCII decimal string to a value of type + UINT64. + + This function returns a value of type UINT64 by interpreting the contents + of the ASCII string String as a decimal number. The format of the input + ASCII string String is: + + [spaces] [decimal digits]. + + The valid decimal digit character is in the range [0-9]. The function will + ignore the pad space, which includes spaces or tab characters, before the digits. + The running zero in the beginning of [decimal digits] will be ignored. Then, the + function stops at the first character that is a not a valid decimal character or + Null-terminator, whichever on comes first. + + If String has only pad spaces, then 0 is returned. + If String has no pad spaces or valid decimal digits, then 0 is returned. + If the number represented by String overflows according to the range defined by + UINT64, then ASSERT(). + If String is NULL, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero, and String contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + + @param String Pointer to a Null-terminated ASCII string. + + @retval UINT64 + +**/ +UINT64 +EFIAPI +AsciiStrDecimalToUint64 ( + IN CONST CHAR8 *String + ); + + +/** + Convert a Null-terminated ASCII hexadecimal string to a value of type UINTN. + + This function returns a value of type UINTN by interpreting the contents of + the ASCII string String as a hexadecimal number. The format of the input ASCII + string String is: + + [spaces][zeros][x][hexadecimal digits]. + + The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F]. + The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix. If "x" + appears in the input string, it must be prefixed with at least one 0. The function + will ignore the pad space, which includes spaces or tab characters, before [zeros], + [x] or [hexadecimal digits]. The running zero before [x] or [hexadecimal digits] + will be ignored. Then, the decoding starts after [x] or the first valid hexadecimal + digit. Then, the function stops at the first character that is a not a valid + hexadecimal character or Null-terminator, whichever on comes first. + + If String has only pad spaces, then 0 is returned. + If String has no leading pad spaces, leading zeros or valid hexadecimal digits, then + 0 is returned. + + If the number represented by String overflows according to the range defined by UINTN, + then ASSERT(). + If String is NULL, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero, + and String contains more than PcdMaximumAsciiStringLength ASCII characters not including + the Null-terminator, then ASSERT(). + + @param String Pointer to a Null-terminated ASCII string. + + @retval UINTN + +**/ +UINTN +EFIAPI +AsciiStrHexToUintn ( + IN CONST CHAR8 *String + ); + + +/** + Convert a Null-terminated ASCII hexadecimal string to a value of type UINT64. + + This function returns a value of type UINT64 by interpreting the contents of + the ASCII string String as a hexadecimal number. The format of the input ASCII + string String is: + + [spaces][zeros][x][hexadecimal digits]. + + The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F]. + The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix. If "x" + appears in the input string, it must be prefixed with at least one 0. The function + will ignore the pad space, which includes spaces or tab characters, before [zeros], + [x] or [hexadecimal digits]. The running zero before [x] or [hexadecimal digits] + will be ignored. Then, the decoding starts after [x] or the first valid hexadecimal + digit. Then, the function stops at the first character that is a not a valid + hexadecimal character or Null-terminator, whichever on comes first. + + If String has only pad spaces, then 0 is returned. + If String has no leading pad spaces, leading zeros or valid hexadecimal digits, then + 0 is returned. + + If the number represented by String overflows according to the range defined by UINT64, + then ASSERT(). + If String is NULL, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero, + and String contains more than PcdMaximumAsciiStringLength ASCII characters not including + the Null-terminator, then ASSERT(). + + @param String Pointer to a Null-terminated ASCII string. + + @retval UINT64 + +**/ +UINT64 +EFIAPI +AsciiStrHexToUint64 ( + IN CONST CHAR8 *String + ); + + +/** + Convert one Null-terminated ASCII string to a Null-terminated + Unicode string and returns the Unicode string. + + This function converts the contents of the ASCII string Source to the Unicode + string Destination, and returns Destination. The function terminates the + Unicode string Destination by appending a Null-terminator character at the end. + The caller is responsible to make sure Destination points to a buffer with size + equal or greater than ((AsciiStrLen (Source) + 1) * sizeof (CHAR16)) in bytes. + + If Destination is NULL, then ASSERT(). + If Destination is not aligned on a 16-bit boundary, then ASSERT(). + If Source is NULL, then ASSERT(). + If Source and Destination overlap, then ASSERT(). + If PcdMaximumAsciiStringLength is not zero, and Source contains more than + PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator, + then ASSERT(). + If PcdMaximumUnicodeStringLength is not zero, and Source contains more than + PcdMaximumUnicodeStringLength ASCII characters not including the + Null-terminator, then ASSERT(). + + @param Source Pointer to a Null-terminated ASCII string. + @param Destination Pointer to a Null-terminated Unicode string. + + @return Destination + +**/ +CHAR16 * +EFIAPI +AsciiStrToUnicodeStr ( + IN CONST CHAR8 *Source, + OUT CHAR16 *Destination + ); + + +/** + Converts an 8-bit value to an 8-bit BCD value. + + Converts the 8-bit value specified by Value to BCD. The BCD value is + returned. + + If Value >= 100, then ASSERT(). + + @param Value The 8-bit value to convert to BCD. Range 0..99. + + @return The BCD value + +**/ +UINT8 +EFIAPI +DecimalToBcd8 ( + IN UINT8 Value + ); + + +/** + Converts an 8-bit BCD value to an 8-bit value. + + Converts the 8-bit BCD value specified by Value to an 8-bit value. The 8-bit + value is returned. + + If Value >= 0xA0, then ASSERT(). + If (Value & 0x0F) >= 0x0A, then ASSERT(). + + @param Value The 8-bit BCD value to convert to an 8-bit value. + + @return The 8-bit value is returned. + +**/ +UINT8 +EFIAPI +BcdToDecimal8 ( + IN UINT8 Value + ); + + +// +// Linked List Functions and Macros +// + +/** + Initializes the head node of a doubly linked list that is declared as a + global variable in a module. + + Initializes the forward and backward links of a new linked list. After + initializing a linked list with this macro, the other linked list functions + may be used to add and remove nodes from the linked list. This macro results + in smaller executables by initializing the linked list in the data section, + instead if calling the InitializeListHead() function to perform the + equivalent operation. + + @param ListHead The head note of a list to initiailize. + +**/ +#define INITIALIZE_LIST_HEAD_VARIABLE(ListHead) {&ListHead, &ListHead} + + +/** + Initializes the head node of a doubly linked list, and returns the pointer to + the head node of the doubly linked list. + + Initializes the forward and backward links of a new linked list. After + initializing a linked list with this function, the other linked list + functions may be used to add and remove nodes from the linked list. It is up + to the caller of this function to allocate the memory for ListHead. + + If ListHead is NULL, then ASSERT(). + + @param ListHead A pointer to the head node of a new doubly linked list. + + @return ListHead + +**/ +LIST_ENTRY * +EFIAPI +InitializeListHead ( + IN LIST_ENTRY *ListHead + ); + + +/** + Adds a node to the beginning of a doubly linked list, and returns the pointer + to the head node of the doubly linked list. + + Adds the node Entry at the beginning of the doubly linked list denoted by + ListHead, and returns ListHead. + + If ListHead is NULL, then ASSERT(). + If Entry is NULL, then ASSERT(). + If ListHead was not initialized with InitializeListHead(), then ASSERT(). + If PcdMaximumLinkedListLenth is not zero, and prior to insertion the number + of nodes in ListHead, including the ListHead node, is greater than or + equal to PcdMaximumLinkedListLength, then ASSERT(). + + @param ListHead A pointer to the head node of a doubly linked list. + @param Entry A pointer to a node that is to be inserted at the beginning + of a doubly linked list. + + @return ListHead + +**/ +LIST_ENTRY * +EFIAPI +InsertHeadList ( + IN LIST_ENTRY *ListHead, + IN LIST_ENTRY *Entry + ); + + +/** + Adds a node to the end of a doubly linked list, and returns the pointer to + the head node of the doubly linked list. + + Adds the node Entry to the end of the doubly linked list denoted by ListHead, + and returns ListHead. + + If ListHead is NULL, then ASSERT(). + If Entry is NULL, then ASSERT(). + If ListHead was not initialized with InitializeListHead(), then ASSERT(). + If PcdMaximumLinkedListLenth is not zero, and prior to insertion the number + of nodes in ListHead, including the ListHead node, is greater than or + equal to PcdMaximumLinkedListLength, then ASSERT(). + + @param ListHead A pointer to the head node of a doubly linked list. + @param Entry A pointer to a node that is to be added at the end of the + doubly linked list. + + @return ListHead + +**/ +LIST_ENTRY * +EFIAPI +InsertTailList ( + IN LIST_ENTRY *ListHead, + IN LIST_ENTRY *Entry + ); + + +/** + Retrieves the first node of a doubly linked list. + + Returns the first node of a doubly linked list. List must have been + initialized with InitializeListHead(). If List is empty, then NULL is + returned. + + If List is NULL, then ASSERT(). + If List was not initialized with InitializeListHead(), then ASSERT(). + If PcdMaximumLinkedListLenth is not zero, and the number of nodes + in List, including the List node, is greater than or equal to + PcdMaximumLinkedListLength, then ASSERT(). + + @param List A pointer to the head node of a doubly linked list. + + @return The first node of a doubly linked list. + @retval NULL The list is empty. + +**/ +LIST_ENTRY * +EFIAPI +GetFirstNode ( + IN CONST LIST_ENTRY *List + ); + + +/** + Retrieves the next node of a doubly linked list. + + Returns the node of a doubly linked list that follows Node. List must have + been initialized with InitializeListHead(). If List is empty, then List is + returned. + + If List is NULL, then ASSERT(). + If Node is NULL, then ASSERT(). + If List was not initialized with InitializeListHead(), then ASSERT(). + If PcdMaximumLinkedListLenth is not zero, and List contains more than + PcdMaximumLinkedListLenth nodes, then ASSERT(). + If Node is not a node in List, then ASSERT(). + + @param List A pointer to the head node of a doubly linked list. + @param Node A pointer to a node in the doubly linked list. + + @return Pointer to the next node if one exists. Otherwise a null value which + is actually List is returned. + +**/ +LIST_ENTRY * +EFIAPI +GetNextNode ( + IN CONST LIST_ENTRY *List, + IN CONST LIST_ENTRY *Node + ); + + +/** + Checks to see if a doubly linked list is empty or not. + + Checks to see if the doubly linked list is empty. If the linked list contains + zero nodes, this function returns TRUE. Otherwise, it returns FALSE. + + If ListHead is NULL, then ASSERT(). + If ListHead was not initialized with InitializeListHead(), then ASSERT(). + If PcdMaximumLinkedListLenth is not zero, and the number of nodes + in List, including the List node, is greater than or equal to + PcdMaximumLinkedListLength, then ASSERT(). + + @param ListHead A pointer to the head node of a doubly linked list. + + @retval TRUE The linked list is empty. + @retval FALSE The linked list is not empty. + +**/ +BOOLEAN +EFIAPI +IsListEmpty ( + IN CONST LIST_ENTRY *ListHead + ); + + +/** + Determines if a node in a doubly linked list is null. + + Returns FALSE if Node is one of the nodes in the doubly linked list specified + by List. Otherwise, TRUE is returned. List must have been initialized with + InitializeListHead(). + + If List is NULL, then ASSERT(). + If Node is NULL, then ASSERT(). + If List was not initialized with InitializeListHead(), then ASSERT(). + If PcdMaximumLinkedListLenth is not zero, and the number of nodes + in List, including the List node, is greater than or equal to + PcdMaximumLinkedListLength, then ASSERT(). + If Node is not a node in List and Node is not equal to List, then ASSERT(). + + @param List A pointer to the head node of a doubly linked list. + @param Node A pointer to a node in the doubly linked list. + + @retval TRUE Node is one of the nodes in the doubly linked list. + @retval FALSE Node is not one of the nodes in the doubly linked list. + +**/ +BOOLEAN +EFIAPI +IsNull ( + IN CONST LIST_ENTRY *List, + IN CONST LIST_ENTRY *Node + ); + + +/** + Determines if a node the last node in a doubly linked list. + + Returns TRUE if Node is the last node in the doubly linked list specified by + List. Otherwise, FALSE is returned. List must have been initialized with + InitializeListHead(). + + If List is NULL, then ASSERT(). + If Node is NULL, then ASSERT(). + If List was not initialized with InitializeListHead(), then ASSERT(). + If PcdMaximumLinkedListLenth is not zero, and the number of nodes + in List, including the List node, is greater than or equal to + PcdMaximumLinkedListLength, then ASSERT(). + If Node is not a node in List, then ASSERT(). + + @param List A pointer to the head node of a doubly linked list. + @param Node A pointer to a node in the doubly linked list. + + @retval TRUE Node is the last node in the linked list. + @retval FALSE Node is not the last node in the linked list. + +**/ +BOOLEAN +EFIAPI +IsNodeAtEnd ( + IN CONST LIST_ENTRY *List, + IN CONST LIST_ENTRY *Node + ); + + +/** + Swaps the location of two nodes in a doubly linked list, and returns the + first node after the swap. + + If FirstEntry is identical to SecondEntry, then SecondEntry is returned. + Otherwise, the location of the FirstEntry node is swapped with the location + of the SecondEntry node in a doubly linked list. SecondEntry must be in the + same double linked list as FirstEntry and that double linked list must have + been initialized with InitializeListHead(). SecondEntry is returned after the + nodes are swapped. + + If FirstEntry is NULL, then ASSERT(). + If SecondEntry is NULL, then ASSERT(). + If SecondEntry and FirstEntry are not in the same linked list, then ASSERT(). + If PcdMaximumLinkedListLength is not zero, and the number of nodes in the + linked list containing the FirstEntry and SecondEntry nodes, including + the FirstEntry and SecondEntry nodes, is greater than or equal to + PcdMaximumLinkedListLength, then ASSERT(). + + @param FirstEntry A pointer to a node in a linked list. + @param SecondEntry A pointer to another node in the same linked list. + +**/ +LIST_ENTRY * +EFIAPI +SwapListEntries ( + IN LIST_ENTRY *FirstEntry, + IN LIST_ENTRY *SecondEntry + ); + + +/** + Removes a node from a doubly linked list, and returns the node that follows + the removed node. + + Removes the node Entry from a doubly linked list. It is up to the caller of + this function to release the memory used by this node if that is required. On + exit, the node following Entry in the doubly linked list is returned. If + Entry is the only node in the linked list, then the head node of the linked + list is returned. + + If Entry is NULL, then ASSERT(). + If Entry is the head node of an empty list, then ASSERT(). + If PcdMaximumLinkedListLength is not zero, and the number of nodes in the + linked list containing Entry, including the Entry node, is greater than + or equal to PcdMaximumLinkedListLength, then ASSERT(). + + @param Entry A pointer to a node in a linked list + + @return Entry + +**/ +LIST_ENTRY * +EFIAPI +RemoveEntryList ( + IN CONST LIST_ENTRY *Entry + ); + +// +// Math Services +// + +/** + Shifts a 64-bit integer left between 0 and 63 bits. The low bits are filled + with zeros. The shifted value is returned. + + This function shifts the 64-bit value Operand to the left by Count bits. The + low Count bits are set to zero. The shifted value is returned. + + If Count is greater than 63, then ASSERT(). + + @param Operand The 64-bit operand to shift left. + @param Count The number of bits to shift left. + + @return Operand << Count + +**/ +UINT64 +EFIAPI +LShiftU64 ( + IN UINT64 Operand, + IN UINTN Count + ); + + +/** + Shifts a 64-bit integer right between 0 and 63 bits. This high bits are + filled with zeros. The shifted value is returned. + + This function shifts the 64-bit value Operand to the right by Count bits. The + high Count bits are set to zero. The shifted value is returned. + + If Count is greater than 63, then ASSERT(). + + @param Operand The 64-bit operand to shift right. + @param Count The number of bits to shift right. + + @return Operand >> Count + +**/ +UINT64 +EFIAPI +RShiftU64 ( + IN UINT64 Operand, + IN UINTN Count + ); + + +/** + Shifts a 64-bit integer right between 0 and 63 bits. The high bits are filled + with original integer's bit 63. The shifted value is returned. + + This function shifts the 64-bit value Operand to the right by Count bits. The + high Count bits are set to bit 63 of Operand. The shifted value is returned. + + If Count is greater than 63, then ASSERT(). + + @param Operand The 64-bit operand to shift right. + @param Count The number of bits to shift right. + + @return Operand >> Count + +**/ +UINT64 +EFIAPI +ARShiftU64 ( + IN UINT64 Operand, + IN UINTN Count + ); + + +/** + Rotates a 32-bit integer left between 0 and 31 bits, filling the low bits + with the high bits that were rotated. + + This function rotates the 32-bit value Operand to the left by Count bits. The + low Count bits are fill with the high Count bits of Operand. The rotated + value is returned. + + If Count is greater than 31, then ASSERT(). + + @param Operand The 32-bit operand to rotate left. + @param Count The number of bits to rotate left. + + @return Operand <<< Count + +**/ +UINT32 +EFIAPI +LRotU32 ( + IN UINT32 Operand, + IN UINTN Count + ); + + +/** + Rotates a 32-bit integer right between 0 and 31 bits, filling the high bits + with the low bits that were rotated. + + This function rotates the 32-bit value Operand to the right by Count bits. + The high Count bits are fill with the low Count bits of Operand. The rotated + value is returned. + + If Count is greater than 31, then ASSERT(). + + @param Operand The 32-bit operand to rotate right. + @param Count The number of bits to rotate right. + + @return Operand >>> Count + +**/ +UINT32 +EFIAPI +RRotU32 ( + IN UINT32 Operand, + IN UINTN Count + ); + + +/** + Rotates a 64-bit integer left between 0 and 63 bits, filling the low bits + with the high bits that were rotated. + + This function rotates the 64-bit value Operand to the left by Count bits. The + low Count bits are fill with the high Count bits of Operand. The rotated + value is returned. + + If Count is greater than 63, then ASSERT(). + + @param Operand The 64-bit operand to rotate left. + @param Count The number of bits to rotate left. + + @return Operand <<< Count + +**/ +UINT64 +EFIAPI +LRotU64 ( + IN UINT64 Operand, + IN UINTN Count + ); + + +/** + Rotates a 64-bit integer right between 0 and 63 bits, filling the high bits + with the high low bits that were rotated. + + This function rotates the 64-bit value Operand to the right by Count bits. + The high Count bits are fill with the low Count bits of Operand. The rotated + value is returned. + + If Count is greater than 63, then ASSERT(). + + @param Operand The 64-bit operand to rotate right. + @param Count The number of bits to rotate right. + + @return Operand >>> Count + +**/ +UINT64 +EFIAPI +RRotU64 ( + IN UINT64 Operand, + IN UINTN Count + ); + + +/** + Returns the bit position of the lowest bit set in a 32-bit value. + + This function computes the bit position of the lowest bit set in the 32-bit + value specified by Operand. If Operand is zero, then -1 is returned. + Otherwise, a value between 0 and 31 is returned. + + @param Operand The 32-bit operand to evaluate. + + @return Position of the lowest bit set in Operand if found. + @retval -1 Operand is zero. + +**/ +INTN +EFIAPI +LowBitSet32 ( + IN UINT32 Operand + ); + + +/** + Returns the bit position of the lowest bit set in a 64-bit value. + + This function computes the bit position of the lowest bit set in the 64-bit + value specified by Operand. If Operand is zero, then -1 is returned. + Otherwise, a value between 0 and 63 is returned. + + @param Operand The 64-bit operand to evaluate. + + @return Position of the lowest bit set in Operand if found. + @retval -1 Operand is zero. + +**/ +INTN +EFIAPI +LowBitSet64 ( + IN UINT64 Operand + ); + + +/** + Returns the bit position of the highest bit set in a 32-bit value. Equivalent + to log2(x). + + This function computes the bit position of the highest bit set in the 32-bit + value specified by Operand. If Operand is zero, then -1 is returned. + Otherwise, a value between 0 and 31 is returned. + + @param Operand The 32-bit operand to evaluate. + + @return Position of the highest bit set in Operand if found. + @retval -1 Operand is zero. + +**/ +INTN +EFIAPI +HighBitSet32 ( + IN UINT32 Operand + ); + + +/** + Returns the bit position of the highest bit set in a 64-bit value. Equivalent + to log2(x). + + This function computes the bit position of the highest bit set in the 64-bit + value specified by Operand. If Operand is zero, then -1 is returned. + Otherwise, a value between 0 and 63 is returned. + + @param Operand The 64-bit operand to evaluate. + + @return Position of the highest bit set in Operand if found. + @retval -1 Operand is zero. + +**/ +INTN +EFIAPI +HighBitSet64 ( + IN UINT64 Operand + ); + + +/** + Returns the value of the highest bit set in a 32-bit value. Equivalent to + 1 << HighBitSet32(x). + + This function computes the value of the highest bit set in the 32-bit value + specified by Operand. If Operand is zero, then zero is returned. + + @param Operand The 32-bit operand to evaluate. + + @return 1 << HighBitSet32(Operand) + @retval 0 Operand is zero. + +**/ +UINT32 +EFIAPI +GetPowerOfTwo32 ( + IN UINT32 Operand + ); + + +/** + Returns the value of the highest bit set in a 64-bit value. Equivalent to + 1 << HighBitSet64(x). + + This function computes the value of the highest bit set in the 64-bit value + specified by Operand. If Operand is zero, then zero is returned. + + @param Operand The 64-bit operand to evaluate. + + @return 1 << HighBitSet64(Operand) + @retval 0 Operand is zero. + +**/ +UINT64 +EFIAPI +GetPowerOfTwo64 ( + IN UINT64 Operand + ); + + +/** + Switches the endianess of a 16-bit integer. + + This function swaps the bytes in a 16-bit unsigned value to switch the value + from little endian to big endian or vice versa. The byte swapped value is + returned. + + @param Value Operand A 16-bit unsigned value. + + @return The byte swaped Operand. + +**/ +UINT16 +EFIAPI +SwapBytes16 ( + IN UINT16 Value + ); + + +/** + Switches the endianess of a 32-bit integer. + + This function swaps the bytes in a 32-bit unsigned value to switch the value + from little endian to big endian or vice versa. The byte swapped value is + returned. + + @param Value Operand A 32-bit unsigned value. + + @return The byte swaped Operand. + +**/ +UINT32 +EFIAPI +SwapBytes32 ( + IN UINT32 Value + ); + + +/** + Switches the endianess of a 64-bit integer. + + This function swaps the bytes in a 64-bit unsigned value to switch the value + from little endian to big endian or vice versa. The byte swapped value is + returned. + + @param Value Operand A 64-bit unsigned value. + + @return The byte swaped Operand. + +**/ +UINT64 +EFIAPI +SwapBytes64 ( + IN UINT64 Value + ); + + +/** + Multiples a 64-bit unsigned integer by a 32-bit unsigned integer and + generates a 64-bit unsigned result. + + This function multiples the 64-bit unsigned value Multiplicand by the 32-bit + unsigned value Multiplier and generates a 64-bit unsigned result. This 64- + bit unsigned result is returned. + + If the result overflows, then ASSERT(). + + @param Multiplicand A 64-bit unsigned value. + @param Multiplier A 32-bit unsigned value. + + @return Multiplicand * Multiplier + +**/ +UINT64 +EFIAPI +MultU64x32 ( + IN UINT64 Multiplicand, + IN UINT32 Multiplier + ); + + +/** + Multiples a 64-bit unsigned integer by a 64-bit unsigned integer and + generates a 64-bit unsigned result. + + This function multiples the 64-bit unsigned value Multiplicand by the 64-bit + unsigned value Multiplier and generates a 64-bit unsigned result. This 64- + bit unsigned result is returned. + + If the result overflows, then ASSERT(). + + @param Multiplicand A 64-bit unsigned value. + @param Multiplier A 64-bit unsigned value. + + @return Multiplicand * Multiplier + +**/ +UINT64 +EFIAPI +MultU64x64 ( + IN UINT64 Multiplicand, + IN UINT64 Multiplier + ); + + +/** + Multiples a 64-bit signed integer by a 64-bit signed integer and generates a + 64-bit signed result. + + This function multiples the 64-bit signed value Multiplicand by the 64-bit + signed value Multiplier and generates a 64-bit signed result. This 64-bit + signed result is returned. + + If the result overflows, then ASSERT(). + + @param Multiplicand A 64-bit signed value. + @param Multiplier A 64-bit signed value. + + @return Multiplicand * Multiplier + +**/ +INT64 +EFIAPI +MultS64x64 ( + IN INT64 Multiplicand, + IN INT64 Multiplier + ); + + +/** + Divides a 64-bit unsigned integer by a 32-bit unsigned integer and generates + a 64-bit unsigned result. + + This function divides the 64-bit unsigned value Dividend by the 32-bit + unsigned value Divisor and generates a 64-bit unsigned quotient. This + function returns the 64-bit unsigned quotient. + + If Divisor is 0, then ASSERT(). + + @param Dividend A 64-bit unsigned value. + @param Divisor A 32-bit unsigned value. + + @return Dividend / Divisor + +**/ +UINT64 +EFIAPI +DivU64x32 ( + IN UINT64 Dividend, + IN UINT32 Divisor + ); + + +/** + Divides a 64-bit unsigned integer by a 32-bit unsigned integer and generates + a 32-bit unsigned remainder. + + This function divides the 64-bit unsigned value Dividend by the 32-bit + unsigned value Divisor and generates a 32-bit remainder. This function + returns the 32-bit unsigned remainder. + + If Divisor is 0, then ASSERT(). + + @param Dividend A 64-bit unsigned value. + @param Divisor A 32-bit unsigned value. + + @return Dividend % Divisor + +**/ +UINT32 +EFIAPI +ModU64x32 ( + IN UINT64 Dividend, + IN UINT32 Divisor + ); + + +/** + Divides a 64-bit unsigned integer by a 32-bit unsigned integer and generates + a 64-bit unsigned result and an optional 32-bit unsigned remainder. + + This function divides the 64-bit unsigned value Dividend by the 32-bit + unsigned value Divisor and generates a 64-bit unsigned quotient. If Remainder + is not NULL, then the 32-bit unsigned remainder is returned in Remainder. + This function returns the 64-bit unsigned quotient. + + If Divisor is 0, then ASSERT(). + + @param Dividend A 64-bit unsigned value. + @param Divisor A 32-bit unsigned value. + @param Remainder A pointer to a 32-bit unsigned value. This parameter is + optional and may be NULL. + + @return Dividend / Divisor + +**/ +UINT64 +EFIAPI +DivU64x32Remainder ( + IN UINT64 Dividend, + IN UINT32 Divisor, + OUT UINT32 *Remainder OPTIONAL + ); + + +/** + Divides a 64-bit unsigned integer by a 64-bit unsigned integer and generates + a 64-bit unsigned result and an optional 64-bit unsigned remainder. + + This function divides the 64-bit unsigned value Dividend by the 64-bit + unsigned value Divisor and generates a 64-bit unsigned quotient. If Remainder + is not NULL, then the 64-bit unsigned remainder is returned in Remainder. + This function returns the 64-bit unsigned quotient. + + If Divisor is 0, then ASSERT(). + + @param Dividend A 64-bit unsigned value. + @param Divisor A 64-bit unsigned value. + @param Remainder A pointer to a 64-bit unsigned value. This parameter is + optional and may be NULL. + + @return Dividend / Divisor + +**/ +UINT64 +EFIAPI +DivU64x64Remainder ( + IN UINT64 Dividend, + IN UINT64 Divisor, + OUT UINT64 *Remainder OPTIONAL + ); + + +/** + Divides a 64-bit signed integer by a 64-bit signed integer and generates a + 64-bit signed result and a optional 64-bit signed remainder. + + This function divides the 64-bit signed value Dividend by the 64-bit signed + value Divisor and generates a 64-bit signed quotient. If Remainder is not + NULL, then the 64-bit signed remainder is returned in Remainder. This + function returns the 64-bit signed quotient. + + If Divisor is 0, then ASSERT(). + + @param Dividend A 64-bit signed value. + @param Divisor A 64-bit signed value. + @param Remainder A pointer to a 64-bit signed value. This parameter is + optional and may be NULL. + + @return Dividend / Divisor + +**/ +INT64 +EFIAPI +DivS64x64Remainder ( + IN INT64 Dividend, + IN INT64 Divisor, + OUT INT64 *Remainder OPTIONAL + ); + + +/** + Reads a 16-bit value from memory that may be unaligned. + + This function returns the 16-bit value pointed to by Buffer. The function + guarantees that the read operation does not produce an alignment fault. + + If the Buffer is NULL, then ASSERT(). + + @param Uint16 Pointer to a 16-bit value that may be unaligned. + + @return *Uint16 + +**/ +UINT16 +EFIAPI +ReadUnaligned16 ( + IN CONST UINT16 *Uint16 + ); + + +/** + Writes a 16-bit value to memory that may be unaligned. + + This function writes the 16-bit value specified by Value to Buffer. Value is + returned. The function guarantees that the write operation does not produce + an alignment fault. + + If the Buffer is NULL, then ASSERT(). + + @param Uint16 Pointer to a 16-bit value that may be unaligned. + @param Value 16-bit value to write to Buffer. + + @return Value + +**/ +UINT16 +EFIAPI +WriteUnaligned16 ( + OUT UINT16 *Uint16, + IN UINT16 Value + ); + + +/** + Reads a 24-bit value from memory that may be unaligned. + + This function returns the 24-bit value pointed to by Buffer. The function + guarantees that the read operation does not produce an alignment fault. + + If the Buffer is NULL, then ASSERT(). + + @param Buffer Pointer to a 24-bit value that may be unaligned. + + @return The value read. + +**/ +UINT32 +EFIAPI +ReadUnaligned24 ( + IN CONST UINT32 *Buffer + ); + + +/** + Writes a 24-bit value to memory that may be unaligned. + + This function writes the 24-bit value specified by Value to Buffer. Value is + returned. The function guarantees that the write operation does not produce + an alignment fault. + + If the Buffer is NULL, then ASSERT(). + + @param Buffer Pointer to a 24-bit value that may be unaligned. + @param Value 24-bit value to write to Buffer. + + @return The value written. + +**/ +UINT32 +EFIAPI +WriteUnaligned24 ( + OUT UINT32 *Buffer, + IN UINT32 Value + ); + + +/** + Reads a 32-bit value from memory that may be unaligned. + + This function returns the 32-bit value pointed to by Buffer. The function + guarantees that the read operation does not produce an alignment fault. + + If the Buffer is NULL, then ASSERT(). + + @param Uint32 Pointer to a 32-bit value that may be unaligned. + + @return *Uint32 + +**/ +UINT32 +EFIAPI +ReadUnaligned32 ( + IN CONST UINT32 *Uint32 + ); + + +/** + Writes a 32-bit value to memory that may be unaligned. + + This function writes the 32-bit value specified by Value to Buffer. Value is + returned. The function guarantees that the write operation does not produce + an alignment fault. + + If the Buffer is NULL, then ASSERT(). + + @param Uint32 Pointer to a 32-bit value that may be unaligned. + @param Value 32-bit value to write to Buffer. + + @return Value + +**/ +UINT32 +EFIAPI +WriteUnaligned32 ( + OUT UINT32 *Uint32, + IN UINT32 Value + ); + + +/** + Reads a 64-bit value from memory that may be unaligned. + + This function returns the 64-bit value pointed to by Buffer. The function + guarantees that the read operation does not produce an alignment fault. + + If the Buffer is NULL, then ASSERT(). + + @param Uint64 Pointer to a 64-bit value that may be unaligned. + + @return *Uint64 + +**/ +UINT64 +EFIAPI +ReadUnaligned64 ( + IN CONST UINT64 *Uint64 + ); + + +/** + Writes a 64-bit value to memory that may be unaligned. + + This function writes the 64-bit value specified by Value to Buffer. Value is + returned. The function guarantees that the write operation does not produce + an alignment fault. + + If the Buffer is NULL, then ASSERT(). + + @param Uint64 Pointer to a 64-bit value that may be unaligned. + @param Value 64-bit value to write to Buffer. + + @return Value + +**/ +UINT64 +EFIAPI +WriteUnaligned64 ( + OUT UINT64 *Uint64, + IN UINT64 Value + ); + + +// +// Bit Field Functions +// + +/** + Returns a bit field from an 8-bit value. + + Returns the bitfield specified by the StartBit and the EndBit from Operand. + + If 8-bit operations are not supported, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + + @return The bit field read. + +**/ +UINT8 +EFIAPI +BitFieldRead8 ( + IN UINT8 Operand, + IN UINTN StartBit, + IN UINTN EndBit + ); + + +/** + Writes a bit field to an 8-bit value, and returns the result. + + Writes Value to the bit field specified by the StartBit and the EndBit in + Operand. All other bits in Operand are preserved. The new 8-bit value is + returned. + + If 8-bit operations are not supported, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param Value New value of the bit field. + + @return The new 8-bit value. + +**/ +UINT8 +EFIAPI +BitFieldWrite8 ( + IN UINT8 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 Value + ); + + +/** + Reads a bit field from an 8-bit value, performs a bitwise OR, and returns the + result. + + Performs a bitwise inclusive OR between the bit field specified by StartBit + and EndBit in Operand and the value specified by OrData. All other bits in + Operand are preserved. The new 8-bit value is returned. + + If 8-bit operations are not supported, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param OrData The value to OR with the read value from the value + + @return The new 8-bit value. + +**/ +UINT8 +EFIAPI +BitFieldOr8 ( + IN UINT8 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 OrData + ); + + +/** + Reads a bit field from an 8-bit value, performs a bitwise AND, and returns + the result. + + Performs a bitwise AND between the bit field specified by StartBit and EndBit + in Operand and the value specified by AndData. All other bits in Operand are + preserved. The new 8-bit value is returned. + + If 8-bit operations are not supported, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param AndData The value to AND with the read value from the value. + + @return The new 8-bit value. + +**/ +UINT8 +EFIAPI +BitFieldAnd8 ( + IN UINT8 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData + ); + + +/** + Reads a bit field from an 8-bit value, performs a bitwise AND followed by a + bitwise OR, and returns the result. + + Performs a bitwise AND between the bit field specified by StartBit and EndBit + in Operand and the value specified by AndData, followed by a bitwise + inclusive OR with value specified by OrData. All other bits in Operand are + preserved. The new 8-bit value is returned. + + If 8-bit operations are not supported, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param AndData The value to AND with the read value from the value. + @param OrData The value to OR with the result of the AND operation. + + @return The new 8-bit value. + +**/ +UINT8 +EFIAPI +BitFieldAndThenOr8 ( + IN UINT8 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData, + IN UINT8 OrData + ); + + +/** + Returns a bit field from a 16-bit value. + + Returns the bitfield specified by the StartBit and the EndBit from Operand. + + If 16-bit operations are not supported, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + + @return The bit field read. + +**/ +UINT16 +EFIAPI +BitFieldRead16 ( + IN UINT16 Operand, + IN UINTN StartBit, + IN UINTN EndBit + ); + + +/** + Writes a bit field to a 16-bit value, and returns the result. + + Writes Value to the bit field specified by the StartBit and the EndBit in + Operand. All other bits in Operand are preserved. The new 16-bit value is + returned. + + If 16-bit operations are not supported, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param Value New value of the bit field. + + @return The new 16-bit value. + +**/ +UINT16 +EFIAPI +BitFieldWrite16 ( + IN UINT16 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 Value + ); + + +/** + Reads a bit field from a 16-bit value, performs a bitwise OR, and returns the + result. + + Performs a bitwise inclusive OR between the bit field specified by StartBit + and EndBit in Operand and the value specified by OrData. All other bits in + Operand are preserved. The new 16-bit value is returned. + + If 16-bit operations are not supported, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param OrData The value to OR with the read value from the value + + @return The new 16-bit value. + +**/ +UINT16 +EFIAPI +BitFieldOr16 ( + IN UINT16 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 OrData + ); + + +/** + Reads a bit field from a 16-bit value, performs a bitwise AND, and returns + the result. + + Performs a bitwise AND between the bit field specified by StartBit and EndBit + in Operand and the value specified by AndData. All other bits in Operand are + preserved. The new 16-bit value is returned. + + If 16-bit operations are not supported, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param AndData The value to AND with the read value from the value + + @return The new 16-bit value. + +**/ +UINT16 +EFIAPI +BitFieldAnd16 ( + IN UINT16 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData + ); + + +/** + Reads a bit field from a 16-bit value, performs a bitwise AND followed by a + bitwise OR, and returns the result. + + Performs a bitwise AND between the bit field specified by StartBit and EndBit + in Operand and the value specified by AndData, followed by a bitwise + inclusive OR with value specified by OrData. All other bits in Operand are + preserved. The new 16-bit value is returned. + + If 16-bit operations are not supported, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param AndData The value to AND with the read value from the value. + @param OrData The value to OR with the result of the AND operation. + + @return The new 16-bit value. + +**/ +UINT16 +EFIAPI +BitFieldAndThenOr16 ( + IN UINT16 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData, + IN UINT16 OrData + ); + + +/** + Returns a bit field from a 32-bit value. + + Returns the bitfield specified by the StartBit and the EndBit from Operand. + + If 32-bit operations are not supported, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + + @return The bit field read. + +**/ +UINT32 +EFIAPI +BitFieldRead32 ( + IN UINT32 Operand, + IN UINTN StartBit, + IN UINTN EndBit + ); + + +/** + Writes a bit field to a 32-bit value, and returns the result. + + Writes Value to the bit field specified by the StartBit and the EndBit in + Operand. All other bits in Operand are preserved. The new 32-bit value is + returned. + + If 32-bit operations are not supported, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param Value New value of the bit field. + + @return The new 32-bit value. + +**/ +UINT32 +EFIAPI +BitFieldWrite32 ( + IN UINT32 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 Value + ); + + +/** + Reads a bit field from a 32-bit value, performs a bitwise OR, and returns the + result. + + Performs a bitwise inclusive OR between the bit field specified by StartBit + and EndBit in Operand and the value specified by OrData. All other bits in + Operand are preserved. The new 32-bit value is returned. + + If 32-bit operations are not supported, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param OrData The value to OR with the read value from the value + + @return The new 32-bit value. + +**/ +UINT32 +EFIAPI +BitFieldOr32 ( + IN UINT32 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 OrData + ); + + +/** + Reads a bit field from a 32-bit value, performs a bitwise AND, and returns + the result. + + Performs a bitwise AND between the bit field specified by StartBit and EndBit + in Operand and the value specified by AndData. All other bits in Operand are + preserved. The new 32-bit value is returned. + + If 32-bit operations are not supported, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param AndData The value to AND with the read value from the value + + @return The new 32-bit value. + +**/ +UINT32 +EFIAPI +BitFieldAnd32 ( + IN UINT32 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData + ); + + +/** + Reads a bit field from a 32-bit value, performs a bitwise AND followed by a + bitwise OR, and returns the result. + + Performs a bitwise AND between the bit field specified by StartBit and EndBit + in Operand and the value specified by AndData, followed by a bitwise + inclusive OR with value specified by OrData. All other bits in Operand are + preserved. The new 32-bit value is returned. + + If 32-bit operations are not supported, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param AndData The value to AND with the read value from the value. + @param OrData The value to OR with the result of the AND operation. + + @return The new 32-bit value. + +**/ +UINT32 +EFIAPI +BitFieldAndThenOr32 ( + IN UINT32 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData, + IN UINT32 OrData + ); + + +/** + Returns a bit field from a 64-bit value. + + Returns the bitfield specified by the StartBit and the EndBit from Operand. + + If 64-bit operations are not supported, then ASSERT(). + If StartBit is greater than 63, then ASSERT(). + If EndBit is greater than 63, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..63. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..63. + + @return The bit field read. + +**/ +UINT64 +EFIAPI +BitFieldRead64 ( + IN UINT64 Operand, + IN UINTN StartBit, + IN UINTN EndBit + ); + + +/** + Writes a bit field to a 64-bit value, and returns the result. + + Writes Value to the bit field specified by the StartBit and the EndBit in + Operand. All other bits in Operand are preserved. The new 64-bit value is + returned. + + If 64-bit operations are not supported, then ASSERT(). + If StartBit is greater than 63, then ASSERT(). + If EndBit is greater than 63, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..63. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..63. + @param Value New value of the bit field. + + @return The new 64-bit value. + +**/ +UINT64 +EFIAPI +BitFieldWrite64 ( + IN UINT64 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT64 Value + ); + + +/** + Reads a bit field from a 64-bit value, performs a bitwise OR, and returns the + result. + + Performs a bitwise inclusive OR between the bit field specified by StartBit + and EndBit in Operand and the value specified by OrData. All other bits in + Operand are preserved. The new 64-bit value is returned. + + If 64-bit operations are not supported, then ASSERT(). + If StartBit is greater than 63, then ASSERT(). + If EndBit is greater than 63, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..63. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..63. + @param OrData The value to OR with the read value from the value + + @return The new 64-bit value. + +**/ +UINT64 +EFIAPI +BitFieldOr64 ( + IN UINT64 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT64 OrData + ); + + +/** + Reads a bit field from a 64-bit value, performs a bitwise AND, and returns + the result. + + Performs a bitwise AND between the bit field specified by StartBit and EndBit + in Operand and the value specified by AndData. All other bits in Operand are + preserved. The new 64-bit value is returned. + + If 64-bit operations are not supported, then ASSERT(). + If StartBit is greater than 63, then ASSERT(). + If EndBit is greater than 63, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..63. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..63. + @param AndData The value to AND with the read value from the value + + @return The new 64-bit value. + +**/ +UINT64 +EFIAPI +BitFieldAnd64 ( + IN UINT64 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT64 AndData + ); + + +/** + Reads a bit field from a 64-bit value, performs a bitwise AND followed by a + bitwise OR, and returns the result. + + Performs a bitwise AND between the bit field specified by StartBit and EndBit + in Operand and the value specified by AndData, followed by a bitwise + inclusive OR with value specified by OrData. All other bits in Operand are + preserved. The new 64-bit value is returned. + + If 64-bit operations are not supported, then ASSERT(). + If StartBit is greater than 63, then ASSERT(). + If EndBit is greater than 63, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Operand Operand on which to perform the bitfield operation. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..63. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..63. + @param AndData The value to AND with the read value from the value. + @param OrData The value to OR with the result of the AND operation. + + @return The new 64-bit value. + +**/ +UINT64 +EFIAPI +BitFieldAndThenOr64 ( + IN UINT64 Operand, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT64 AndData, + IN UINT64 OrData + ); + + +// +// Base Library Synchronization Functions +// + +/** + Retrieves the architecture specific spin lock alignment requirements for + optimal spin lock performance. + + This function retrieves the spin lock alignment requirements for optimal + performance on a given CPU architecture. The spin lock alignment must be a + power of two and is returned by this function. If there are no alignment + requirements, then 1 must be returned. The spin lock synchronization + functions must function correctly if the spin lock size and alignment values + returned by this function are not used at all. These values are hints to the + consumers of the spin lock synchronization functions to obtain optimal spin + lock performance. + + @return The architecture specific spin lock alignment. + +**/ +UINTN +EFIAPI +GetSpinLockProperties ( + VOID + ); + + +/** + Initializes a spin lock to the released state and returns the spin lock. + + This function initializes the spin lock specified by SpinLock to the released + state, and returns SpinLock. Optimal performance can be achieved by calling + GetSpinLockProperties() to determine the size and alignment requirements for + SpinLock. + + If SpinLock is NULL, then ASSERT(). + + @param SpinLock A pointer to the spin lock to initialize to the released + state. + + @return SpinLock + +**/ +SPIN_LOCK * +EFIAPI +InitializeSpinLock ( + IN SPIN_LOCK *SpinLock + ); + + +/** + Waits until a spin lock can be placed in the acquired state. + + This function checks the state of the spin lock specified by SpinLock. If + SpinLock is in the released state, then this function places SpinLock in the + acquired state and returns SpinLock. Otherwise, this function waits + indefinitely for the spin lock to be released, and then places it in the + acquired state and returns SpinLock. All state transitions of SpinLock must + be performed using MP safe mechanisms. + + If SpinLock is NULL, then ASSERT(). + If SpinLock was not initialized with InitializeSpinLock(), then ASSERT(). + If PcdSpinLockTimeout is not zero, and SpinLock is can not be acquired in + PcdSpinLockTimeout microseconds, then ASSERT(). + + @param SpinLock A pointer to the spin lock to place in the acquired state. + + @return SpinLock + +**/ +SPIN_LOCK * +EFIAPI +AcquireSpinLock ( + IN SPIN_LOCK *SpinLock + ); + + +/** + Attempts to place a spin lock in the acquired state. + + This function checks the state of the spin lock specified by SpinLock. If + SpinLock is in the released state, then this function places SpinLock in the + acquired state and returns TRUE. Otherwise, FALSE is returned. All state + transitions of SpinLock must be performed using MP safe mechanisms. + + If SpinLock is NULL, then ASSERT(). + If SpinLock was not initialized with InitializeSpinLock(), then ASSERT(). + + @param SpinLock A pointer to the spin lock to place in the acquired state. + + @retval TRUE SpinLock was placed in the acquired state. + @retval FALSE SpinLock could not be acquired. + +**/ +BOOLEAN +EFIAPI +AcquireSpinLockOrFail ( + IN SPIN_LOCK *SpinLock + ); + + +/** + Releases a spin lock. + + This function places the spin lock specified by SpinLock in the release state + and returns SpinLock. + + If SpinLock is NULL, then ASSERT(). + If SpinLock was not initialized with InitializeSpinLock(), then ASSERT(). + + @param SpinLock A pointer to the spin lock to release. + + @return SpinLock + +**/ +SPIN_LOCK * +EFIAPI +ReleaseSpinLock ( + IN SPIN_LOCK *SpinLock + ); + + +/** + Performs an atomic increment of an 32-bit unsigned integer. + + Performs an atomic increment of the 32-bit unsigned integer specified by + Value and returns the incremented value. The increment operation must be + performed using MP safe mechanisms. The state of the return value is not + guaranteed to be MP safe. + + If Value is NULL, then ASSERT(). + + @param Value A pointer to the 32-bit value to increment. + + @return The incremented value. + +**/ +UINT32 +EFIAPI +InterlockedIncrement ( + IN UINT32 *Value + ); + + +/** + Performs an atomic decrement of an 32-bit unsigned integer. + + Performs an atomic decrement of the 32-bit unsigned integer specified by + Value and returns the decremented value. The decrement operation must be + performed using MP safe mechanisms. The state of the return value is not + guaranteed to be MP safe. + + If Value is NULL, then ASSERT(). + + @param Value A pointer to the 32-bit value to decrement. + + @return The decremented value. + +**/ +UINT32 +EFIAPI +InterlockedDecrement ( + IN UINT32 *Value + ); + + +/** + Performs an atomic compare exchange operation on a 32-bit unsigned integer. + + Performs an atomic compare exchange operation on the 32-bit unsigned integer + specified by Value. If Value is equal to CompareValue, then Value is set to + ExchangeValue and CompareValue is returned. If Value is not equal to CompareValue, + then Value is returned. The compare exchange operation must be performed using + MP safe mechanisms. + + If Value is NULL, then ASSERT(). + + @param Value A pointer to the 32-bit value for the compare exchange + operation. + @param CompareValue 32-bit value used in compare operation. + @param ExchangeValue 32-bit value used in exchange operation. + + @return The original *Value before exchange. + +**/ +UINT32 +EFIAPI +InterlockedCompareExchange32 ( + IN OUT UINT32 *Value, + IN UINT32 CompareValue, + IN UINT32 ExchangeValue + ); + + +/** + Performs an atomic compare exchange operation on a 64-bit unsigned integer. + + Performs an atomic compare exchange operation on the 64-bit unsigned integer specified + by Value. If Value is equal to CompareValue, then Value is set to ExchangeValue and + CompareValue is returned. If Value is not equal to CompareValue, then Value is returned. + The compare exchange operation must be performed using MP safe mechanisms. + + If Value is NULL, then ASSERT(). + + @param Value A pointer to the 64-bit value for the compare exchange + operation. + @param CompareValue 64-bit value used in compare operation. + @param ExchangeValue 64-bit value used in exchange operation. + + @return The original *Value before exchange. + +**/ +UINT64 +EFIAPI +InterlockedCompareExchange64 ( + IN OUT UINT64 *Value, + IN UINT64 CompareValue, + IN UINT64 ExchangeValue + ); + + +/** + Performs an atomic compare exchange operation on a pointer value. + + Performs an atomic compare exchange operation on the pointer value specified + by Value. If Value is equal to CompareValue, then Value is set to + ExchangeValue and CompareValue is returned. If Value is not equal to + CompareValue, then Value is returned. The compare exchange operation must be + performed using MP safe mechanisms. + + If Value is NULL, then ASSERT(). + + @param Value A pointer to the pointer value for the compare exchange + operation. + @param CompareValue Pointer value used in compare operation. + @param ExchangeValue Pointer value used in exchange operation. + +**/ +VOID * +EFIAPI +InterlockedCompareExchangePointer ( + IN OUT VOID **Value, + IN VOID *CompareValue, + IN VOID *ExchangeValue + ); + + +// +// Base Library Checksum Functions +// + +/** + Calculate the sum of all elements in a buffer in unit of UINT8. + During calculation, the carry bits are dropped. + + This function calculates the sum of all elements in a buffer + in unit of UINT8. The carry bits in result of addition are dropped. + The result is returned as UINT8. If Length is Zero, then Zero is + returned. + + If Buffer is NULL, then ASSERT(). + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). + + @param Buffer Pointer to the buffer to carry out the sum operation. + @param Length The size, in bytes, of Buffer . + + @return Sum The sum of Buffer with carry bits dropped during additions. + +**/ +UINT8 +EFIAPI +CalculateSum8 ( + IN CONST UINT8 *Buffer, + IN UINTN Length + ); + + +/** + Returns the two's complement checksum of all elements in a buffer + of 8-bit values. + + This function first calculates the sum of the 8-bit values in the + buffer specified by Buffer and Length. The carry bits in the result + of addition are dropped. Then, the two's complement of the sum is + returned. If Length is 0, then 0 is returned. + + If Buffer is NULL, then ASSERT(). + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). + + + @param Buffer Pointer to the buffer to carry out the checksum operation. + @param Length The size, in bytes, of Buffer. + + @return Checksum The 2's complement checksum of Buffer. + +**/ +UINT8 +EFIAPI +CalculateCheckSum8 ( + IN CONST UINT8 *Buffer, + IN UINTN Length + ); + + +/** + Returns the sum of all elements in a buffer of 16-bit values. During + calculation, the carry bits are dropped. + + This function calculates the sum of the 16-bit values in the buffer + specified by Buffer and Length. The carry bits in result of addition are dropped. + The 16-bit result is returned. If Length is 0, then 0 is returned. + + If Buffer is NULL, then ASSERT(). + If Buffer is not aligned on a 16-bit boundary, then ASSERT(). + If Length is not aligned on a 16-bit boundary, then ASSERT(). + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). + + @param Buffer Pointer to the buffer to carry out the sum operation. + @param Length The size, in bytes, of Buffer. + + @return Sum The sum of Buffer with carry bits dropped during additions. + +**/ +UINT16 +EFIAPI +CalculateSum16 ( + IN CONST UINT16 *Buffer, + IN UINTN Length + ); + + +/** + Returns the two's complement checksum of all elements in a buffer of + 16-bit values. + + This function first calculates the sum of the 16-bit values in the buffer + specified by Buffer and Length. The carry bits in the result of addition + are dropped. Then, the two's complement of the sum is returned. If Length + is 0, then 0 is returned. + + If Buffer is NULL, then ASSERT(). + If Buffer is not aligned on a 16-bit boundary, then ASSERT(). + If Length is not aligned on a 16-bit boundary, then ASSERT(). + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). + + @param Buffer Pointer to the buffer to carry out the checksum operation. + @param Length The size, in bytes, of Buffer. + + @return Checksum The 2's complement checksum of Buffer. + +**/ +UINT16 +EFIAPI +CalculateCheckSum16 ( + IN CONST UINT16 *Buffer, + IN UINTN Length + ); + + +/** + Returns the sum of all elements in a buffer of 32-bit values. During + calculation, the carry bits are dropped. + + This function calculates the sum of the 32-bit values in the buffer + specified by Buffer and Length. The carry bits in result of addition are dropped. + The 32-bit result is returned. If Length is 0, then 0 is returned. + + If Buffer is NULL, then ASSERT(). + If Buffer is not aligned on a 32-bit boundary, then ASSERT(). + If Length is not aligned on a 32-bit boundary, then ASSERT(). + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). + + @param Buffer Pointer to the buffer to carry out the sum operation. + @param Length The size, in bytes, of Buffer. + + @return Sum The sum of Buffer with carry bits dropped during additions. + +**/ +UINT32 +EFIAPI +CalculateSum32 ( + IN CONST UINT32 *Buffer, + IN UINTN Length + ); + + +/** + Returns the two's complement checksum of all elements in a buffer of + 32-bit values. + + This function first calculates the sum of the 32-bit values in the buffer + specified by Buffer and Length. The carry bits in the result of addition + are dropped. Then, the two's complement of the sum is returned. If Length + is 0, then 0 is returned. + + If Buffer is NULL, then ASSERT(). + If Buffer is not aligned on a 32-bit boundary, then ASSERT(). + If Length is not aligned on a 32-bit boundary, then ASSERT(). + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). + + @param Buffer Pointer to the buffer to carry out the checksum operation. + @param Length The size, in bytes, of Buffer. + + @return Checksum The 2's complement checksum of Buffer. + +**/ +UINT32 +EFIAPI +CalculateCheckSum32 ( + IN CONST UINT32 *Buffer, + IN UINTN Length + ); + + +/** + Returns the sum of all elements in a buffer of 64-bit values. During + calculation, the carry bits are dropped. + + This function calculates the sum of the 64-bit values in the buffer + specified by Buffer and Length. The carry bits in result of addition are dropped. + The 64-bit result is returned. If Length is 0, then 0 is returned. + + If Buffer is NULL, then ASSERT(). + If Buffer is not aligned on a 64-bit boundary, then ASSERT(). + If Length is not aligned on a 64-bit boundary, then ASSERT(). + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). + + @param Buffer Pointer to the buffer to carry out the sum operation. + @param Length The size, in bytes, of Buffer. + + @return Sum The sum of Buffer with carry bits dropped during additions. + +**/ +UINT64 +EFIAPI +CalculateSum64 ( + IN CONST UINT64 *Buffer, + IN UINTN Length + ); + + +/** + Returns the two's complement checksum of all elements in a buffer of + 64-bit values. + + This function first calculates the sum of the 64-bit values in the buffer + specified by Buffer and Length. The carry bits in the result of addition + are dropped. Then, the two's complement of the sum is returned. If Length + is 0, then 0 is returned. + + If Buffer is NULL, then ASSERT(). + If Buffer is not aligned on a 64-bit boundary, then ASSERT(). + If Length is not aligned on a 64-bit boundary, then ASSERT(). + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). + + @param Buffer Pointer to the buffer to carry out the checksum operation. + @param Length The size, in bytes, of Buffer. + + @return Checksum The 2's complement checksum of Buffer. + +**/ +UINT64 +EFIAPI +CalculateCheckSum64 ( + IN CONST UINT64 *Buffer, + IN UINTN Length + ); + + +// +// Base Library CPU Functions +// +typedef +VOID +(EFIAPI *SWITCH_STACK_ENTRY_POINT) ( + IN VOID *Context1, OPTIONAL + IN VOID *Context2 OPTIONAL + ); + + +/** + Used to serialize load and store operations. + + All loads and stores that proceed calls to this function are guaranteed to be + globally visible when this function returns. + +**/ +VOID +EFIAPI +MemoryFence ( + VOID + ); + + +/** + Saves the current CPU context that can be restored with a call to LongJump() + and returns 0. + + Saves the current CPU context in the buffer specified by JumpBuffer and + returns 0. The initial call to SetJump() must always return 0. Subsequent + calls to LongJump() cause a non-zero value to be returned by SetJump(). + + If JumpBuffer is NULL, then ASSERT(). + For IPF CPUs, if JumpBuffer is not aligned on a 16-byte boundary, then ASSERT(). + + @param JumpBuffer A pointer to CPU context buffer. + + @retval 0 Indicates a return from SetJump(). + +**/ +UINTN +EFIAPI +SetJump ( + OUT BASE_LIBRARY_JUMP_BUFFER *JumpBuffer + ); + + +/** + Restores the CPU context that was saved with SetJump(). + + Restores the CPU context from the buffer specified by JumpBuffer. This + function never returns to the caller. Instead is resumes execution based on + the state of JumpBuffer. + + If JumpBuffer is NULL, then ASSERT(). + For IPF CPUs, if JumpBuffer is not aligned on a 16-byte boundary, then ASSERT(). + If Value is 0, then ASSERT(). + + @param JumpBuffer A pointer to CPU context buffer. + @param Value The value to return when the SetJump() context is + restored and must be non-zero. + +**/ +VOID +EFIAPI +LongJump ( + IN BASE_LIBRARY_JUMP_BUFFER *JumpBuffer, + IN UINTN Value + ); + + +/** + Enables CPU interrupts. + + Enables CPU interrupts. + +**/ +VOID +EFIAPI +EnableInterrupts ( + VOID + ); + + +/** + Disables CPU interrupts. + + Disables CPU interrupts. + +**/ +VOID +EFIAPI +DisableInterrupts ( + VOID + ); + + +/** + Disables CPU interrupts and returns the interrupt state prior to the disable + operation. + + Disables CPU interrupts and returns the interrupt state prior to the disable + operation. + + @retval TRUE CPU interrupts were enabled on entry to this call. + @retval FALSE CPU interrupts were disabled on entry to this call. + +**/ +BOOLEAN +EFIAPI +SaveAndDisableInterrupts ( + VOID + ); + + +/** + Enables CPU interrupts for the smallest window required to capture any + pending interrupts. + + Enables CPU interrupts for the smallest window required to capture any + pending interrupts. + +**/ +VOID +EFIAPI +EnableDisableInterrupts ( + VOID + ); + + +/** + Retrieves the current CPU interrupt state. + + Retrieves the current CPU interrupt state. Returns TRUE is interrupts are + currently enabled. Otherwise returns FALSE. + + @retval TRUE CPU interrupts are enabled. + @retval FALSE CPU interrupts are disabled. + +**/ +BOOLEAN +EFIAPI +GetInterruptState ( + VOID + ); + + +/** + Set the current CPU interrupt state. + + Sets the current CPU interrupt state to the state specified by + InterruptState. If InterruptState is TRUE, then interrupts are enabled. If + InterruptState is FALSE, then interrupts are disabled. InterruptState is + returned. + + @param InterruptState TRUE if interrupts should enabled. FALSE if + interrupts should be disabled. + + @return InterruptState + +**/ +BOOLEAN +EFIAPI +SetInterruptState ( + IN BOOLEAN InterruptState + ); + + +/** + Requests CPU to pause for a short period of time. + + Requests CPU to pause for a short period of time. Typically used in MP + systems to prevent memory starvation while waiting for a spin lock. + +**/ +VOID +EFIAPI +CpuPause ( + VOID + ); + + +/** + Transfers control to a function starting with a new stack. + + Transfers control to the function specified by EntryPoint using the + new stack specified by NewStack and passing in the parameters specified + by Context1 and Context2. Context1 and Context2 are optional and may + be NULL. The function EntryPoint must never return. This function + supports a variable number of arguments following the NewStack parameter. + These additional arguments are ignored on IA-32, x64, and EBC. + IPF CPUs expect one additional parameter of type VOID * that specifies + the new backing store pointer. + + If EntryPoint is NULL, then ASSERT(). + If NewStack is NULL, then ASSERT(). + + @param EntryPoint A pointer to function to call with the new stack. + @param Context1 A pointer to the context to pass into the EntryPoint + function. + @param Context2 A pointer to the context to pass into the EntryPoint + function. + @param NewStack A pointer to the new stack to use for the EntryPoint + function. + +**/ +VOID +EFIAPI +SwitchStack ( + IN SWITCH_STACK_ENTRY_POINT EntryPoint, + IN VOID *Context1, OPTIONAL + IN VOID *Context2, OPTIONAL + IN VOID *NewStack, + ... + ); + + +/** + Generates a breakpoint on the CPU. + + Generates a breakpoint on the CPU. The breakpoint must be implemented such + that code can resume normal execution after the breakpoint. + +**/ +VOID +EFIAPI +CpuBreakpoint ( + VOID + ); + + +/** + Executes an infinite loop. + + Forces the CPU to execute an infinite loop. A debugger may be used to skip + past the loop and the code that follows the loop must execute properly. This + implies that the infinite loop must not cause the code that follow it to be + optimized away. + +**/ +VOID +EFIAPI +CpuDeadLoop ( + VOID + ); + + +#if defined (MDE_CPU_IPF) + +/** + Flush a range of cache lines in the cache coherency domain of the calling + CPU. + + Invalidates the cache lines specified by Address and Length. If Address is + not aligned on a cache line boundary, then entire cache line containing + Address is invalidated. If Address + Length is not aligned on a cache line + boundary, then the entire instruction cache line containing Address + Length + -1 is invalidated. This function may choose to invalidate the entire + instruction cache if that is more efficient than invalidating the specified + range. If Length is 0, the no instruction cache lines are invalidated. + Address is returned. + + If Length is greater than (MAX_ADDRESS - Address + 1), then ASSERT(). + + @param Address The base address of the instruction lines to invalidate. If + the CPU is in a physical addressing mode, then Address is a + physical address. If the CPU is in a virtual addressing mode, + then Address is a virtual address. + + @param Length The number of bytes to invalidate from the instruction cache. + + @return Address + +**/ +VOID * +EFIAPI +IpfFlushCacheRange ( + IN VOID *Address, + IN UINTN Length + ); + + +/** + Executes a FC instruction + Executes a FC instruction on the cache line specified by Address. + The cache line size affected is at least 32-bytes (aligned on a 32-byte boundary). + An implementation may flush a larger region. This function is only available on IPF. + + @param Address The Address of cache line to be flushed. + + @return The address of FC instruction executed. + +**/ +UINT64 +EFIAPI +AsmFc ( + IN UINT64 Address + ); + + +/** + Executes a FC.I instruction. + Executes a FC.I instruction on the cache line specified by Address. + The cache line size affected is at least 32-bytes (aligned on a 32-byte boundary). + An implementation may flush a larger region. This function is only available on IPF. + + @param Address The Address of cache line to be flushed. + + @return The address of FC.I instruction executed. + +**/ +UINT64 +EFIAPI +AsmFci ( + IN UINT64 Address + ); + + +/** + Reads the current value of a Processor Identifier Register (CPUID). + The Index of largest implemented CPUID (One less than the number of implemented CPUID + registers) is determined by CPUID [3] bits {7:0}. + No parameter checking is performed on Index. If the Index value is beyond the + implemented CPUID register range, a Reserved Register/Field fault may occur. The caller + must either guarantee that Index is valid, or the caller must set up fault handlers to + catch the faults. This function is only available on IPF. + + @param Index The 8-bit Processor Identifier Register index to read. + + @return The current value of Processor Identifier Register specified by Index. + +**/ +UINT64 +EFIAPI +AsmReadCpuid ( + IN UINT8 Index + ); + + +/** + Reads the current value of 64-bit Processor Status Register (PSR). + This function is only available on IPF. + + @return The current value of PSR. + +**/ +UINT64 +EFIAPI +AsmReadPsr ( + VOID + ); + + +/** + Writes the current value of 64-bit Processor Status Register (PSR). + No parameter checking is performed on Value. All bits of Value corresponding to + reserved fields of PSR must be 0 or a Reserved Register/Field fault may occur. The caller must either guarantee that Value is valid, or the caller must set up fault handlers to catch the faults. + This function is only available on IPF. + + @param Value The 64-bit value to write to PSR. + + @return The 64-bit value written to the PSR. + +**/ +UINT64 +EFIAPI +AsmWritePsr ( + IN UINT64 Value + ); + + +/** + Reads the current value of 64-bit Kernel Register #0 (KR0). + This function is only available on IPF. + + @return The current value of KR0. + +**/ +UINT64 +EFIAPI +AsmReadKr0 ( + VOID + ); + + +/** + Reads the current value of 64-bit Kernel Register #1 (KR1). + This function is only available on IPF. + + @return The current value of KR1. + +**/ +UINT64 +EFIAPI +AsmReadKr1 ( + VOID + ); + + +/** + Reads the current value of 64-bit Kernel Register #2 (KR2). + This function is only available on IPF. + + @return The current value of KR2. + +**/ +UINT64 +EFIAPI +AsmReadKr2 ( + VOID + ); + + +/** + Reads the current value of 64-bit Kernel Register #3 (KR3). + This function is only available on IPF. + + @return The current value of KR3. + +**/ +UINT64 +EFIAPI +AsmReadKr3 ( + VOID + ); + + +/** + Reads the current value of 64-bit Kernel Register #4 (KR4). + This function is only available on IPF. + + @return The current value of KR4. + +**/ +UINT64 +EFIAPI +AsmReadKr4 ( + VOID + ); + + +/** + Reads the current value of 64-bit Kernel Register #5 (KR5). + This function is only available on IPF. + + @return The current value of KR5. + +**/ +UINT64 +EFIAPI +AsmReadKr5 ( + VOID + ); + + +/** + Reads the current value of 64-bit Kernel Register #6 (KR6). + This function is only available on IPF. + + @return The current value of KR6. + +**/ +UINT64 +EFIAPI +AsmReadKr6 ( + VOID + ); + + +/** + Reads the current value of 64-bit Kernel Register #7 (KR7). + This function is only available on IPF. + + @return The current value of KR7. + +**/ +UINT64 +EFIAPI +AsmReadKr7 ( + VOID + ); + + +/** + Write the current value of 64-bit Kernel Register #0 (KR0). + This function is only available on IPF. + + @param Value The 64-bit value to write to KR0. + + @return The 64-bit value written to the KR0. + +**/ +UINT64 +EFIAPI +AsmWriteKr0 ( + IN UINT64 Value + ); + + +/** + Write the current value of 64-bit Kernel Register #1 (KR1). + This function is only available on IPF. + + @param Value The 64-bit value to write to KR1. + + @return The 64-bit value written to the KR1. + +**/ +UINT64 +EFIAPI +AsmWriteKr1 ( + IN UINT64 Value + ); + + +/** + Write the current value of 64-bit Kernel Register #2 (KR2). + This function is only available on IPF. + + @param Value The 64-bit value to write to KR2. + + @return The 64-bit value written to the KR2. + +**/ +UINT64 +EFIAPI +AsmWriteKr2 ( + IN UINT64 Value + ); + + +/** + Write the current value of 64-bit Kernel Register #3 (KR3). + This function is only available on IPF. + + @param Value The 64-bit value to write to KR3. + + @return The 64-bit value written to the KR3. + +**/ +UINT64 +EFIAPI +AsmWriteKr3 ( + IN UINT64 Value + ); + + +/** + Write the current value of 64-bit Kernel Register #4 (KR4). + This function is only available on IPF. + + @param Value The 64-bit value to write to KR4. + + @return The 64-bit value written to the KR4. + +**/ +UINT64 +EFIAPI +AsmWriteKr4 ( + IN UINT64 Value + ); + + +/** + Write the current value of 64-bit Kernel Register #5 (KR5). + This function is only available on IPF. + + @param Value The 64-bit value to write to KR5. + + @return The 64-bit value written to the KR5. + +**/ +UINT64 +EFIAPI +AsmWriteKr5 ( + IN UINT64 Value + ); + + +/** + Write the current value of 64-bit Kernel Register #6 (KR6). + This function is only available on IPF. + + @param Value The 64-bit value to write to KR6. + + @return The 64-bit value written to the KR6. + +**/ +UINT64 +EFIAPI +AsmWriteKr6 ( + IN UINT64 Value + ); + + +/** + Write the current value of 64-bit Kernel Register #7 (KR7). + This function is only available on IPF. + + @param Value The 64-bit value to write to KR7. + + @return The 64-bit value written to the KR7. + +**/ +UINT64 +EFIAPI +AsmWriteKr7 ( + IN UINT64 Value + ); + + +/** + Reads the current value of Interval Timer Counter Register (ITC). + This function is only available on IPF. + + @return The current value of ITC. + +**/ +UINT64 +EFIAPI +AsmReadItc ( + VOID + ); + + +/** + Reads the current value of Interval Timer Vector Register (ITV). + This function is only available on IPF. + + @return The current value of ITV. + +**/ +UINT64 +EFIAPI +AsmReadItv ( + VOID + ); + + +/** + Reads the current value of Interval Timer Match Register (ITM). + This function is only available on IPF. + + @return The current value of ITM. +**/ +UINT64 +EFIAPI +AsmReadItm ( + VOID + ); + + +/** + Writes the current value of 64-bit Interval Timer Counter Register (ITC). + This function is only available on IPF. + + @param Value The 64-bit value to write to ITC. + + @return The 64-bit value written to the ITC. + +**/ +UINT64 +EFIAPI +AsmWriteItc ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Interval Timer Match Register (ITM). + This function is only available on IPF. + + @param Value The 64-bit value to write to ITM. + + @return The 64-bit value written to the ITM. + +**/ +UINT64 +EFIAPI +AsmWriteItm ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Interval Timer Vector Register (ITV). + No parameter checking is performed on Value. All bits of Value corresponding to + reserved fields of ITV must be 0 or a Reserved Register/Field fault may occur. + The caller must either guarantee that Value is valid, or the caller must set up + fault handlers to catch the faults. + This function is only available on IPF. + + @param Value The 64-bit value to write to ITV. + + @return The 64-bit value written to the ITV. + +**/ +UINT64 +EFIAPI +AsmWriteItv ( + IN UINT64 Value + ); + + +/** + Reads the current value of Default Control Register (DCR). + This function is only available on IPF. + + @return The current value of DCR. + +**/ +UINT64 +EFIAPI +AsmReadDcr ( + VOID + ); + + +/** + Reads the current value of Interruption Vector Address Register (IVA). + This function is only available on IPF. + + @return The current value of IVA. +**/ +UINT64 +EFIAPI +AsmReadIva ( + VOID + ); + + +/** + Reads the current value of Page Table Address Register (PTA). + This function is only available on IPF. + + @return The current value of PTA. + +**/ +UINT64 +EFIAPI +AsmReadPta ( + VOID + ); + + +/** + Writes the current value of 64-bit Default Control Register (DCR). + No parameter checking is performed on Value. All bits of Value corresponding to + reserved fields of DCR must be 0 or a Reserved Register/Field fault may occur. + The caller must either guarantee that Value is valid, or the caller must set up + fault handlers to catch the faults. + This function is only available on IPF. + + @param Value The 64-bit value to write to DCR. + + @return The 64-bit value written to the DCR. + +**/ +UINT64 +EFIAPI +AsmWriteDcr ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Interruption Vector Address Register (IVA). + The size of vector table is 32 K bytes and is 32 K bytes aligned + the low 15 bits of Value is ignored when written. + This function is only available on IPF. + + @param Value The 64-bit value to write to IVA. + + @return The 64-bit value written to the IVA. + +**/ +UINT64 +EFIAPI +AsmWriteIva ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Page Table Address Register (PTA). + No parameter checking is performed on Value. All bits of Value corresponding to + reserved fields of DCR must be 0 or a Reserved Register/Field fault may occur. + The caller must either guarantee that Value is valid, or the caller must set up + fault handlers to catch the faults. + This function is only available on IPF. + + @param Value The 64-bit value to write to PTA. + + @return The 64-bit value written to the PTA. +**/ +UINT64 +EFIAPI +AsmWritePta ( + IN UINT64 Value + ); + + +/** + Reads the current value of Local Interrupt ID Register (LID). + This function is only available on IPF. + + @return The current value of LID. + +**/ +UINT64 +EFIAPI +AsmReadLid ( + VOID + ); + + +/** + Reads the current value of External Interrupt Vector Register (IVR). + This function is only available on IPF. + + @return The current value of IVR. + +**/ +UINT64 +EFIAPI +AsmReadIvr ( + VOID + ); + + +/** + Reads the current value of Task Priority Register (TPR). + This function is only available on IPF. + + @return The current value of TPR. + +**/ +UINT64 +EFIAPI +AsmReadTpr ( + VOID + ); + + +/** + Reads the current value of External Interrupt Request Register #0 (IRR0). + This function is only available on IPF. + + @return The current value of IRR0. + +**/ +UINT64 +EFIAPI +AsmReadIrr0 ( + VOID + ); + + +/** + Reads the current value of External Interrupt Request Register #1 (IRR1). + This function is only available on IPF. + + @return The current value of IRR1. + +**/ +UINT64 +EFIAPI +AsmReadIrr1 ( + VOID + ); + + +/** + Reads the current value of External Interrupt Request Register #2 (IRR2). + This function is only available on IPF. + + @return The current value of IRR2. + +**/ +UINT64 +EFIAPI +AsmReadIrr2 ( + VOID + ); + + +/** + Reads the current value of External Interrupt Request Register #3 (IRR3). + This function is only available on IPF. + + @return The current value of IRR3. + +**/ +UINT64 +EFIAPI +AsmReadIrr3 ( + VOID + ); + + +/** + Reads the current value of Performance Monitor Vector Register (PMV). + This function is only available on IPF. + + @return The current value of PMV. + +**/ +UINT64 +EFIAPI +AsmReadPmv ( + VOID + ); + + +/** + Reads the current value of Corrected Machine Check Vector Register (CMCV). + This function is only available on IPF. + + @return The current value of CMCV. + +**/ +UINT64 +EFIAPI +AsmReadCmcv ( + VOID + ); + + +/** + Reads the current value of Local Redirection Register #0 (LRR0). + This function is only available on IPF. + + @return The current value of LRR0. + +**/ +UINT64 +EFIAPI +AsmReadLrr0 ( + VOID + ); + + +/** + Reads the current value of Local Redirection Register #1 (LRR1). + This function is only available on IPF. + + @return The current value of LRR1. + +**/ +UINT64 +EFIAPI +AsmReadLrr1 ( + VOID + ); + + +/** + Writes the current value of 64-bit Page Local Interrupt ID Register (LID). + No parameter checking is performed on Value. All bits of Value corresponding to + reserved fields of LID must be 0 or a Reserved Register/Field fault may occur. + The caller must either guarantee that Value is valid, or the caller must set up + fault handlers to catch the faults. + This function is only available on IPF. + + @param Value The 64-bit value to write to LID. + + @return The 64-bit value written to the LID. + +**/ +UINT64 +EFIAPI +AsmWriteLid ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Task Priority Register (TPR). + No parameter checking is performed on Value. All bits of Value corresponding to + reserved fields of TPR must be 0 or a Reserved Register/Field fault may occur. + The caller must either guarantee that Value is valid, or the caller must set up + fault handlers to catch the faults. + This function is only available on IPF. + + @param Value The 64-bit value to write to TPR. + + @return The 64-bit value written to the TPR. + +**/ +UINT64 +EFIAPI +AsmWriteTpr ( + IN UINT64 Value + ); + + +/** + Performs a write operation on End OF External Interrupt Register (EOI). + Writes a value of 0 to the EOI Register. This function is only available on IPF. + +**/ +VOID +EFIAPI +AsmWriteEoi ( + VOID + ); + + +/** + Writes the current value of 64-bit Performance Monitor Vector Register (PMV). + No parameter checking is performed on Value. All bits of Value corresponding + to reserved fields of PMV must be 0 or a Reserved Register/Field fault may occur. + The caller must either guarantee that Value is valid, or the caller must set up + fault handlers to catch the faults. + This function is only available on IPF. + + @param Value The 64-bit value to write to PMV. + + @return The 64-bit value written to the PMV. + +**/ +UINT64 +EFIAPI +AsmWritePmv ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Corrected Machine Check Vector Register (CMCV). + No parameter checking is performed on Value. All bits of Value corresponding + to reserved fields of CMCV must be 0 or a Reserved Register/Field fault may occur. + The caller must either guarantee that Value is valid, or the caller must set up + fault handlers to catch the faults. + This function is only available on IPF. + + @param Value The 64-bit value to write to CMCV. + + @return The 64-bit value written to the CMCV. + +**/ +UINT64 +EFIAPI +AsmWriteCmcv ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Local Redirection Register #0 (LRR0). + No parameter checking is performed on Value. All bits of Value corresponding + to reserved fields of LRR0 must be 0 or a Reserved Register/Field fault may occur. + The caller must either guarantee that Value is valid, or the caller must set up + fault handlers to catch the faults. + This function is only available on IPF. + + @param Value The 64-bit value to write to LRR0. + + @return The 64-bit value written to the LRR0. + +**/ +UINT64 +EFIAPI +AsmWriteLrr0 ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Local Redirection Register #1 (LRR1). + No parameter checking is performed on Value. All bits of Value corresponding + to reserved fields of LRR1 must be 0 or a Reserved Register/Field fault may occur. + The caller must either guarantee that Value is valid, or the caller must + set up fault handlers to catch the faults. + This function is only available on IPF. + + @param Value The 64-bit value to write to LRR1. + + @return The 64-bit value written to the LRR1. + +**/ +UINT64 +EFIAPI +AsmWriteLrr1 ( + IN UINT64 Value + ); + + +/** + Reads the current value of Instruction Breakpoint Register (IBR). + + The Instruction Breakpoint Registers are used in pairs. The even numbered + registers contain breakpoint addresses, and the odd numbered registers contain + breakpoint mask conditions. At least 4 instruction registers pairs are implemented + on all processor models. Implemented registers are contiguous starting with + register 0. No parameter checking is performed on Index, and if the Index value + is beyond the implemented IBR register range, a Reserved Register/Field fault may + occur. The caller must either guarantee that Index is valid, or the caller must + set up fault handlers to catch the faults. + This function is only available on IPF. + + @param Index The 8-bit Instruction Breakpoint Register index to read. + + @return The current value of Instruction Breakpoint Register specified by Index. + +**/ +UINT64 +EFIAPI +AsmReadIbr ( + IN UINT8 Index + ); + + +/** + Reads the current value of Data Breakpoint Register (DBR). + + The Data Breakpoint Registers are used in pairs. The even numbered registers + contain breakpoint addresses, and odd numbered registers contain breakpoint + mask conditions. At least 4 data registers pairs are implemented on all processor + models. Implemented registers are contiguous starting with register 0. + No parameter checking is performed on Index. If the Index value is beyond + the implemented DBR register range, a Reserved Register/Field fault may occur. + The caller must either guarantee that Index is valid, or the caller must set up + fault handlers to catch the faults. + This function is only available on IPF. + + @param Index The 8-bit Data Breakpoint Register index to read. + + @return The current value of Data Breakpoint Register specified by Index. + +**/ +UINT64 +EFIAPI +AsmReadDbr ( + IN UINT8 Index + ); + + +/** + Reads the current value of Performance Monitor Configuration Register (PMC). + + All processor implementations provide at least 4 performance counters + (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter overflow + status registers (PMC [0]... PMC [3]). Processor implementations may provide + additional implementation-dependent PMC and PMD to increase the number of + 'generic' performance counters (PMC/PMD pairs). The remainder of PMC and PMD + register set is implementation dependent. No parameter checking is performed + on Index. If the Index value is beyond the implemented PMC register range, + zero value will be returned. + This function is only available on IPF. + + @param Index The 8-bit Performance Monitor Configuration Register index to read. + + @return The current value of Performance Monitor Configuration Register + specified by Index. + +**/ +UINT64 +EFIAPI +AsmReadPmc ( + IN UINT8 Index + ); + + +/** + Reads the current value of Performance Monitor Data Register (PMD). + + All processor implementations provide at least 4 performance counters + (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter + overflow status registers (PMC [0]... PMC [3]). Processor implementations may + provide additional implementation-dependent PMC and PMD to increase the number + of 'generic' performance counters (PMC/PMD pairs). The remainder of PMC and PMD + register set is implementation dependent. No parameter checking is performed + on Index. If the Index value is beyond the implemented PMD register range, + zero value will be returned. + This function is only available on IPF. + + @param Index The 8-bit Performance Monitor Data Register index to read. + + @return The current value of Performance Monitor Data Register specified by Index. + +**/ +UINT64 +EFIAPI +AsmReadPmd ( + IN UINT8 Index + ); + + +/** + Writes the current value of 64-bit Instruction Breakpoint Register (IBR). + + Writes current value of Instruction Breakpoint Register specified by Index. + The Instruction Breakpoint Registers are used in pairs. The even numbered + registers contain breakpoint addresses, and odd numbered registers contain + breakpoint mask conditions. At least 4 instruction registers pairs are implemented + on all processor models. Implemented registers are contiguous starting with + register 0. No parameter checking is performed on Index. If the Index value + is beyond the implemented IBR register range, a Reserved Register/Field fault may + occur. The caller must either guarantee that Index is valid, or the caller must + set up fault handlers to catch the faults. + This function is only available on IPF. + + @param Index The 8-bit Instruction Breakpoint Register index to write. + @param Value The 64-bit value to write to IBR. + + @return The 64-bit value written to the IBR. + +**/ +UINT64 +EFIAPI +AsmWriteIbr ( + IN UINT8 Index, + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Data Breakpoint Register (DBR). + + Writes current value of Data Breakpoint Register specified by Index. + The Data Breakpoint Registers are used in pairs. The even numbered registers + contain breakpoint addresses, and odd numbered registers contain breakpoint + mask conditions. At least 4 data registers pairs are implemented on all processor + models. Implemented registers are contiguous starting with register 0. No parameter + checking is performed on Index. If the Index value is beyond the implemented + DBR register range, a Reserved Register/Field fault may occur. The caller must + either guarantee that Index is valid, or the caller must set up fault handlers to + catch the faults. + This function is only available on IPF. + + @param Index The 8-bit Data Breakpoint Register index to write. + @param Value The 64-bit value to write to DBR. + + @return The 64-bit value written to the DBR. + +**/ +UINT64 +EFIAPI +AsmWriteDbr ( + IN UINT8 Index, + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Performance Monitor Configuration Register (PMC). + + Writes current value of Performance Monitor Configuration Register specified by Index. + All processor implementations provide at least 4 performance counters + (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter overflow status + registers (PMC [0]... PMC [3]). Processor implementations may provide additional + implementation-dependent PMC and PMD to increase the number of 'generic' performance + counters (PMC/PMD pairs). The remainder of PMC and PMD register set is implementation + dependent. No parameter checking is performed on Index. If the Index value is + beyond the implemented PMC register range, the write is ignored. + This function is only available on IPF. + + @param Index The 8-bit Performance Monitor Configuration Register index to write. + @param Value The 64-bit value to write to PMC. + + @return The 64-bit value written to the PMC. + +**/ +UINT64 +EFIAPI +AsmWritePmc ( + IN UINT8 Index, + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit Performance Monitor Data Register (PMD). + + Writes current value of Performance Monitor Data Register specified by Index. + All processor implementations provide at least 4 performance counters + (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter overflow + status registers (PMC [0]... PMC [3]). Processor implementations may provide + additional implementation-dependent PMC and PMD to increase the number of 'generic' + performance counters (PMC/PMD pairs). The remainder of PMC and PMD register set + is implementation dependent. No parameter checking is performed on Index. If the + Index value is beyond the implemented PMD register range, the write is ignored. + This function is only available on IPF. + + @param Index The 8-bit Performance Monitor Data Register index to write. + @param Value The 64-bit value to write to PMD. + + @return The 64-bit value written to the PMD. + +**/ +UINT64 +EFIAPI +AsmWritePmd ( + IN UINT8 Index, + IN UINT64 Value + ); + + +/** + Reads the current value of 64-bit Global Pointer (GP). + + Reads and returns the current value of GP. + This function is only available on IPF. + + @return The current value of GP. + +**/ +UINT64 +EFIAPI +AsmReadGp ( + VOID + ); + + +/** + Write the current value of 64-bit Global Pointer (GP). + + Writes the current value of GP. The 64-bit value written to the GP is returned. + No parameter checking is performed on Value. + This function is only available on IPF. + + @param Value The 64-bit value to write to GP. + + @return The 64-bit value written to the GP. + +**/ +UINT64 +EFIAPI +AsmWriteGp ( + IN UINT64 Value + ); + + +/** + Reads the current value of 64-bit Stack Pointer (SP). + + Reads and returns the current value of SP. + This function is only available on IPF. + + @return The current value of SP. + +**/ +UINT64 +EFIAPI +AsmReadSp ( + VOID + ); + + +/** + Determines if the CPU is currently executing in virtual, physical, or mixed mode. + + Determines the current execution mode of the CPU. + If the CPU is in virtual mode(PSR.RT=1, PSR.DT=1, PSR.IT=1), then 1 is returned. + If the CPU is in physical mode(PSR.RT=0, PSR.DT=0, PSR.IT=0), then 0 is returned. + If the CPU is not in physical mode or virtual mode, then it is in mixed mode, + and -1 is returned. + This function is only available on IPF. + + @return 1 The CPU is in virtual mode. + @return 0 The CPU is in physical mode. + @return -1 The CPU is in mixed mode. + +**/ +INT64 +EFIAPI +AsmCpuVirtual ( + VOID + ); + + +/** + Makes a PAL procedure call. + + This is a wrapper function to make a PAL procedure call. Based on the Index + value this API will make static or stacked PAL call. The following table + describes the usage of PAL Procedure Index Assignment. Architected procedures + may be designated as required or optional. If a PAL procedure is specified + as optional, a unique return code of 0xFFFFFFFFFFFFFFFF is returned in the + Status field of the PAL_CALL_RETURN structure. + This indicates that the procedure is not present in this PAL implementation. + It is the caller's responsibility to check for this return code after calling + any optional PAL procedure. + No parameter checking is performed on the 5 input parameters, but there are + some common rules that the caller should follow when making a PAL call. Any + address passed to PAL as buffers for return parameters must be 8-byte aligned. + Unaligned addresses may cause undefined results. For those parameters defined + as reserved or some fields defined as reserved must be zero filled or the invalid + argument return value may be returned or undefined result may occur during the + execution of the procedure. If the PalEntryPoint does not point to a valid + PAL entry point then the system behavior is undefined. This function is only + available on IPF. + + @param PalEntryPoint The PAL procedure calls entry point. + @param Index The PAL procedure Index number. + @param Arg2 The 2nd parameter for PAL procedure calls. + @param Arg3 The 3rd parameter for PAL procedure calls. + @param Arg4 The 4th parameter for PAL procedure calls. + + @return structure returned from the PAL Call procedure, including the status and return value. + +**/ +PAL_CALL_RETURN +EFIAPI +AsmPalCall ( + IN UINT64 PalEntryPoint, + IN UINT64 Index, + IN UINT64 Arg2, + IN UINT64 Arg3, + IN UINT64 Arg4 + ); + + +/** + Transfers control to a function starting with a new stack. + + Transfers control to the function specified by EntryPoint using the new stack + specified by NewStack and passing in the parameters specified by Context1 and + Context2. Context1 and Context2 are optional and may be NULL. The function + EntryPoint must never return. + + If EntryPoint is NULL, then ASSERT(). + If NewStack is NULL, then ASSERT(). + + @param EntryPoint A pointer to function to call with the new stack. + @param Context1 A pointer to the context to pass into the EntryPoint + function. + @param Context2 A pointer to the context to pass into the EntryPoint + function. + @param NewStack A pointer to the new stack to use for the EntryPoint + function. + @param NewBsp A pointer to the new memory location for RSE backing + store. + +**/ +VOID +EFIAPI +AsmSwitchStackAndBackingStore ( + IN SWITCH_STACK_ENTRY_POINT EntryPoint, + IN VOID *Context1, OPTIONAL + IN VOID *Context2, OPTIONAL + IN VOID *NewStack, + IN VOID *NewBsp + ); + + +// +// Bugbug: This call should be removed after +// the PalCall Instance issue has been fixed. +// +/** + Performs a PAL call using static calling convention. + + An internal function to perform a PAL call using static calling convention. + + @param PalEntryPoint The entry point address of PAL. The address in ar.kr5 + would be used if this parameter were NULL on input. + @param Arg1 The first argument of a PAL call. + @param Arg1 The second argument of a PAL call. + @param Arg1 The third argument of a PAL call. + @param Arg1 The fourth argument of a PAL call. + + @return The values returned in r8, r9, r10 and r11. + +**/ +PAL_CALL_RETURN +PalCallStatic ( + IN CONST VOID *PalEntryPoint, + IN UINT64 Arg1, + IN UINT64 Arg2, + IN UINT64 Arg3, + IN UINT64 Arg4 + ); + + +#elif defined (MDE_CPU_IA32) || defined (MDE_CPU_X64) +// +// IA32 and X64 Specific Functions +// +// +// Byte packed structure for 16-bit Real Mode EFLAGS +// +typedef union { + struct { + UINT32 CF:1; // Carry Flag + UINT32 Reserved_0:1; // Reserved + UINT32 PF:1; // Parity Flag + UINT32 Reserved_1:1; // Reserved + UINT32 AF:1; // Auxiliary Carry Flag + UINT32 Reserved_2:1; // Reserved + UINT32 ZF:1; // Zero Flag + UINT32 SF:1; // Sign Flag + UINT32 TF:1; // Trap Flag + UINT32 IF:1; // Interrupt Enable Flag + UINT32 DF:1; // Direction Flag + UINT32 OF:1; // Overflow Flag + UINT32 IOPL:2; // I/O Privilege Level + UINT32 NT:1; // Nested Task + UINT32 Reserved_3:1; // Reserved + } Bits; + UINT16 Uint16; +} IA32_FLAGS16; + +// +// Byte packed structure for EFLAGS/RFLAGS +// 32-bits on IA-32 +// 64-bits on X64. The upper 32-bits on X64 are reserved +// +typedef union { + struct { + UINT32 CF:1; // Carry Flag + UINT32 Reserved_0:1; // Reserved + UINT32 PF:1; // Parity Flag + UINT32 Reserved_1:1; // Reserved + UINT32 AF:1; // Auxiliary Carry Flag + UINT32 Reserved_2:1; // Reserved + UINT32 ZF:1; // Zero Flag + UINT32 SF:1; // Sign Flag + UINT32 TF:1; // Trap Flag + UINT32 IF:1; // Interrupt Enable Flag + UINT32 DF:1; // Direction Flag + UINT32 OF:1; // Overflow Flag + UINT32 IOPL:2; // I/O Privilege Level + UINT32 NT:1; // Nested Task + UINT32 Reserved_3:1; // Reserved + UINT32 RF:1; // Resume Flag + UINT32 VM:1; // Virtual 8086 Mode + UINT32 AC:1; // Alignment Check + UINT32 VIF:1; // Virtual Interrupt Flag + UINT32 VIP:1; // Virtual Interrupt Pending + UINT32 ID:1; // ID Flag + UINT32 Reserved_4:10; // Reserved + } Bits; + UINTN UintN; +} IA32_EFLAGS32; + +// +// Byte packed structure for Control Register 0 (CR0) +// 32-bits on IA-32 +// 64-bits on X64. The upper 32-bits on X64 are reserved +// +typedef union { + struct { + UINT32 PE:1; // Protection Enable + UINT32 MP:1; // Monitor Coprocessor + UINT32 EM:1; // Emulation + UINT32 TS:1; // Task Switched + UINT32 ET:1; // Extension Type + UINT32 NE:1; // Numeric Error + UINT32 Reserved_0:10; // Reserved + UINT32 WP:1; // Write Protect + UINT32 Reserved_1:1; // Reserved + UINT32 AM:1; // Alignment Mask + UINT32 Reserved_2:10; // Reserved + UINT32 NW:1; // Mot Write-through + UINT32 CD:1; // Cache Disable + UINT32 PG:1; // Paging + } Bits; + UINTN UintN; +} IA32_CR0; + +// +// Byte packed structure for Control Register 4 (CR4) +// 32-bits on IA-32 +// 64-bits on X64. The upper 32-bits on X64 are reserved +// +typedef union { + struct { + UINT32 VME:1; // Virtual-8086 Mode Extensions + UINT32 PVI:1; // Protected-Mode Virtual Interrupts + UINT32 TSD:1; // Time Stamp Disable + UINT32 DE:1; // Debugging Extensions + UINT32 PSE:1; // Page Size Extensions + UINT32 PAE:1; // Physical Address Extension + UINT32 MCE:1; // Machine Check Enable + UINT32 PGE:1; // Page Global Enable + UINT32 PCE:1; // Performance Monitoring Counter + // Enable + UINT32 OSFXSR:1; // Operating System Support for + // FXSAVE and FXRSTOR instructions + UINT32 OSXMMEXCPT:1; // Operating System Support for + // Unmasked SIMD Floating Point + // Exceptions + UINT32 Reserved_0:2; // Reserved + UINT32 VMXE:1; // VMX Enable + UINT32 Reserved_1:18; // Reseved + } Bits; + UINTN UintN; +} IA32_CR4; + +// +// Byte packed structure for an IDTR, GDTR, LDTR descriptor +/// @bug How to make this structure byte-packed in a compiler independent way? +// +#pragma pack (1) +typedef struct { + UINT16 Limit; + UINTN Base; +} IA32_DESCRIPTOR; +#pragma pack () + +#define IA32_IDT_GATE_TYPE_TASK 0x85 +#define IA32_IDT_GATE_TYPE_INTERRUPT_16 0x86 +#define IA32_IDT_GATE_TYPE_TRAP_16 0x87 +#define IA32_IDT_GATE_TYPE_INTERRUPT_32 0x8E +#define IA32_IDT_GATE_TYPE_TRAP_32 0x8F + +// +// Byte packed structure for an Interrupt Gate Descriptor +// +typedef union { + struct { + UINT32 OffsetLow:16; // Offset bits 15..0 + UINT32 Selector:16; // Selector + UINT32 Reserved_0:8; // Reserved + UINT32 GateType:8; // Gate Type. See #defines above + UINT32 OffsetHigh:16; // Offset bits 31..16 + } Bits; + UINT64 Uint64; +} IA32_IDT_GATE_DESCRIPTOR; + +// +// Byte packed structure for an FP/SSE/SSE2 context +// +typedef struct { + UINT8 Buffer[512]; +} IA32_FX_BUFFER; + +// +// Structures for the 16-bit real mode thunks +// +typedef struct { + UINT32 Reserved1; + UINT32 Reserved2; + UINT32 Reserved3; + UINT32 Reserved4; + UINT8 BL; + UINT8 BH; + UINT16 Reserved5; + UINT8 DL; + UINT8 DH; + UINT16 Reserved6; + UINT8 CL; + UINT8 CH; + UINT16 Reserved7; + UINT8 AL; + UINT8 AH; + UINT16 Reserved8; +} IA32_BYTE_REGS; + +typedef struct { + UINT16 DI; + UINT16 Reserved1; + UINT16 SI; + UINT16 Reserved2; + UINT16 BP; + UINT16 Reserved3; + UINT16 SP; + UINT16 Reserved4; + UINT16 BX; + UINT16 Reserved5; + UINT16 DX; + UINT16 Reserved6; + UINT16 CX; + UINT16 Reserved7; + UINT16 AX; + UINT16 Reserved8; +} IA32_WORD_REGS; + +typedef struct { + UINT32 EDI; + UINT32 ESI; + UINT32 EBP; + UINT32 ESP; + UINT32 EBX; + UINT32 EDX; + UINT32 ECX; + UINT32 EAX; + UINT16 DS; + UINT16 ES; + UINT16 FS; + UINT16 GS; + IA32_EFLAGS32 EFLAGS; + UINT32 Eip; + UINT16 CS; + UINT16 SS; +} IA32_DWORD_REGS; + +typedef union { + IA32_DWORD_REGS E; + IA32_WORD_REGS X; + IA32_BYTE_REGS H; +} IA32_REGISTER_SET; + +// +// Byte packed structure for an 16-bit real mode thunks +// +typedef struct { + IA32_REGISTER_SET *RealModeState; + VOID *RealModeBuffer; + UINT32 RealModeBufferSize; + UINT32 ThunkAttributes; +} THUNK_CONTEXT; + +#define THUNK_ATTRIBUTE_BIG_REAL_MODE 0x00000001 +#define THUNK_ATTRIBUTE_DISABLE_A20_MASK_INT_15 0x00000002 +#define THUNK_ATTRIBUTE_DISABLE_A20_MASK_KBD_CTRL 0x00000004 + +/** + Retrieves CPUID information. + + Executes the CPUID instruction with EAX set to the value specified by Index. + This function always returns Index. + If Eax is not NULL, then the value of EAX after CPUID is returned in Eax. + If Ebx is not NULL, then the value of EBX after CPUID is returned in Ebx. + If Ecx is not NULL, then the value of ECX after CPUID is returned in Ecx. + If Edx is not NULL, then the value of EDX after CPUID is returned in Edx. + This function is only available on IA-32 and X64. + + @param Index The 32-bit value to load into EAX prior to invoking the CPUID + instruction. + @param Eax Pointer to the 32-bit EAX value returned by the CPUID + instruction. This is an optional parameter that may be NULL. + @param Ebx Pointer to the 32-bit EBX value returned by the CPUID + instruction. This is an optional parameter that may be NULL. + @param Ecx Pointer to the 32-bit ECX value returned by the CPUID + instruction. This is an optional parameter that may be NULL. + @param Edx Pointer to the 32-bit EDX value returned by the CPUID + instruction. This is an optional parameter that may be NULL. + + @return Index + +**/ +UINT32 +EFIAPI +AsmCpuid ( + IN UINT32 Index, + OUT UINT32 *Eax, OPTIONAL + OUT UINT32 *Ebx, OPTIONAL + OUT UINT32 *Ecx, OPTIONAL + OUT UINT32 *Edx OPTIONAL + ); + + +/** + Retrieves CPUID information using an extended leaf identifier. + + Executes the CPUID instruction with EAX set to the value specified by Index + and ECX set to the value specified by SubIndex. This function always returns + Index. This function is only available on IA-32 and x64. + + If Eax is not NULL, then the value of EAX after CPUID is returned in Eax. + If Ebx is not NULL, then the value of EBX after CPUID is returned in Ebx. + If Ecx is not NULL, then the value of ECX after CPUID is returned in Ecx. + If Edx is not NULL, then the value of EDX after CPUID is returned in Edx. + + @param Index The 32-bit value to load into EAX prior to invoking the + CPUID instruction. + @param SubIndex The 32-bit value to load into ECX prior to invoking the + CPUID instruction. + @param Eax Pointer to the 32-bit EAX value returned by the CPUID + instruction. This is an optional parameter that may be + NULL. + @param Ebx Pointer to the 32-bit EBX value returned by the CPUID + instruction. This is an optional parameter that may be + NULL. + @param Ecx Pointer to the 32-bit ECX value returned by the CPUID + instruction. This is an optional parameter that may be + NULL. + @param Edx Pointer to the 32-bit EDX value returned by the CPUID + instruction. This is an optional parameter that may be + NULL. + + @return Index + +**/ +UINT32 +EFIAPI +AsmCpuidEx ( + IN UINT32 Index, + IN UINT32 SubIndex, + OUT UINT32 *Eax, OPTIONAL + OUT UINT32 *Ebx, OPTIONAL + OUT UINT32 *Ecx, OPTIONAL + OUT UINT32 *Edx OPTIONAL + ); + + +/** + Returns the lower 32-bits of a Machine Specific Register(MSR). + + Reads and returns the lower 32-bits of the MSR specified by Index. + No parameter checking is performed on Index, and some Index values may cause + CPU exceptions. The caller must either guarantee that Index is valid, or the + caller must set up exception handlers to catch the exceptions. This function + is only available on IA-32 and X64. + + @param Index The 32-bit MSR index to read. + + @return The lower 32 bits of the MSR identified by Index. + +**/ +UINT32 +EFIAPI +AsmReadMsr32 ( + IN UINT32 Index + ); + + +/** + Zero-extend a 32-bit value and writes it to a Machine Specific Register(MSR). + + Writes the 32-bit value specified by Value to the MSR specified by Index. The + upper 32-bits of the MSR write are set to zero. The 32-bit value written to + the MSR is returned. No parameter checking is performed on Index or Value, + and some of these may cause CPU exceptions. The caller must either guarantee + that Index and Value are valid, or the caller must establish proper exception + handlers. This function is only available on IA-32 and X64. + + @param Index The 32-bit MSR index to write. + @param Value The 32-bit value to write to the MSR. + + @return Value + +**/ +UINT32 +EFIAPI +AsmWriteMsr32 ( + IN UINT32 Index, + IN UINT32 Value + ); + + +/** + Reads a 64-bit MSR, performs a bitwise inclusive OR on the lower 32-bits, and + writes the result back to the 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise inclusive OR + between the lower 32-bits of the read result and the value specified by + OrData, and writes the result to the 64-bit MSR specified by Index. The lower + 32-bits of the value written to the MSR is returned. No parameter checking is + performed on Index or OrData, and some of these may cause CPU exceptions. The + caller must either guarantee that Index and OrData are valid, or the caller + must establish proper exception handlers. This function is only available on + IA-32 and X64. + + @param Index The 32-bit MSR index to write. + @param OrData The value to OR with the read value from the MSR. + + @return The lower 32-bit value written to the MSR. + +**/ +UINT32 +EFIAPI +AsmMsrOr32 ( + IN UINT32 Index, + IN UINT32 OrData + ); + + +/** + Reads a 64-bit MSR, performs a bitwise AND on the lower 32-bits, and writes + the result back to the 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise AND between the + lower 32-bits of the read result and the value specified by AndData, and + writes the result to the 64-bit MSR specified by Index. The lower 32-bits of + the value written to the MSR is returned. No parameter checking is performed + on Index or AndData, and some of these may cause CPU exceptions. The caller + must either guarantee that Index and AndData are valid, or the caller must + establish proper exception handlers. This function is only available on IA-32 + and X64. + + @param Index The 32-bit MSR index to write. + @param AndData The value to AND with the read value from the MSR. + + @return The lower 32-bit value written to the MSR. + +**/ +UINT32 +EFIAPI +AsmMsrAnd32 ( + IN UINT32 Index, + IN UINT32 AndData + ); + + +/** + Reads a 64-bit MSR, performs a bitwise AND followed by a bitwise inclusive OR + on the lower 32-bits, and writes the result back to the 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise AND between the + lower 32-bits of the read result and the value specified by AndData + preserving the upper 32-bits, performs a bitwise inclusive OR between the + result of the AND operation and the value specified by OrData, and writes the + result to the 64-bit MSR specified by Address. The lower 32-bits of the value + written to the MSR is returned. No parameter checking is performed on Index, + AndData, or OrData, and some of these may cause CPU exceptions. The caller + must either guarantee that Index, AndData, and OrData are valid, or the + caller must establish proper exception handlers. This function is only + available on IA-32 and X64. + + @param Index The 32-bit MSR index to write. + @param AndData The value to AND with the read value from the MSR. + @param OrData The value to OR with the result of the AND operation. + + @return The lower 32-bit value written to the MSR. + +**/ +UINT32 +EFIAPI +AsmMsrAndThenOr32 ( + IN UINT32 Index, + IN UINT32 AndData, + IN UINT32 OrData + ); + + +/** + Reads a bit field of an MSR. + + Reads the bit field in the lower 32-bits of a 64-bit MSR. The bit field is + specified by the StartBit and the EndBit. The value of the bit field is + returned. The caller must either guarantee that Index is valid, or the caller + must set up exception handlers to catch the exceptions. This function is only + available on IA-32 and X64. + + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Index The 32-bit MSR index to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + + @return The bit field read from the MSR. + +**/ +UINT32 +EFIAPI +AsmMsrBitFieldRead32 ( + IN UINT32 Index, + IN UINTN StartBit, + IN UINTN EndBit + ); + + +/** + Writes a bit field to an MSR. + + Writes Value to a bit field in the lower 32-bits of a 64-bit MSR. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination MSR are preserved. The lower 32-bits of the MSR written is + returned. Extra left bits in Value are stripped. The caller must either + guarantee that Index and the data written is valid, or the caller must set up + exception handlers to catch the exceptions. This function is only available + on IA-32 and X64. + + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Index The 32-bit MSR index to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param Value New value of the bit field. + + @return The lower 32-bit of the value written to the MSR. + +**/ +UINT32 +EFIAPI +AsmMsrBitFieldWrite32 ( + IN UINT32 Index, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 Value + ); + + +/** + Reads a bit field in a 64-bit MSR, performs a bitwise OR, and writes the + result back to the bit field in the 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise inclusive OR + between the read result and the value specified by OrData, and writes the + result to the 64-bit MSR specified by Index. The lower 32-bits of the value + written to the MSR are returned. Extra left bits in OrData are stripped. The + caller must either guarantee that Index and the data written is valid, or + the caller must set up exception handlers to catch the exceptions. This + function is only available on IA-32 and X64. + + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Index The 32-bit MSR index to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param OrData The value to OR with the read value from the MSR. + + @return The lower 32-bit of the value written to the MSR. + +**/ +UINT32 +EFIAPI +AsmMsrBitFieldOr32 ( + IN UINT32 Index, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 OrData + ); + + +/** + Reads a bit field in a 64-bit MSR, performs a bitwise AND, and writes the + result back to the bit field in the 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise AND between the + read result and the value specified by AndData, and writes the result to the + 64-bit MSR specified by Index. The lower 32-bits of the value written to the + MSR are returned. Extra left bits in AndData are stripped. The caller must + either guarantee that Index and the data written is valid, or the caller must + set up exception handlers to catch the exceptions. This function is only + available on IA-32 and X64. + + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Index The 32-bit MSR index to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param AndData The value to AND with the read value from the MSR. + + @return The lower 32-bit of the value written to the MSR. + +**/ +UINT32 +EFIAPI +AsmMsrBitFieldAnd32 ( + IN UINT32 Index, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData + ); + + +/** + Reads a bit field in a 64-bit MSR, performs a bitwise AND followed by a + bitwise inclusive OR, and writes the result back to the bit field in the + 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise AND followed by a + bitwise inclusive OR between the read result and the value specified by + AndData, and writes the result to the 64-bit MSR specified by Index. The + lower 32-bits of the value written to the MSR are returned. Extra left bits + in both AndData and OrData are stripped. The caller must either guarantee + that Index and the data written is valid, or the caller must set up exception + handlers to catch the exceptions. This function is only available on IA-32 + and X64. + + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Index The 32-bit MSR index to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param AndData The value to AND with the read value from the MSR. + @param OrData The value to OR with the result of the AND operation. + + @return The lower 32-bit of the value written to the MSR. + +**/ +UINT32 +EFIAPI +AsmMsrBitFieldAndThenOr32 ( + IN UINT32 Index, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData, + IN UINT32 OrData + ); + + +/** + Returns a 64-bit Machine Specific Register(MSR). + + Reads and returns the 64-bit MSR specified by Index. No parameter checking is + performed on Index, and some Index values may cause CPU exceptions. The + caller must either guarantee that Index is valid, or the caller must set up + exception handlers to catch the exceptions. This function is only available + on IA-32 and X64. + + @param Index The 32-bit MSR index to read. + + @return The value of the MSR identified by Index. + +**/ +UINT64 +EFIAPI +AsmReadMsr64 ( + IN UINT32 Index + ); + + +/** + Writes a 64-bit value to a Machine Specific Register(MSR), and returns the + value. + + Writes the 64-bit value specified by Value to the MSR specified by Index. The + 64-bit value written to the MSR is returned. No parameter checking is + performed on Index or Value, and some of these may cause CPU exceptions. The + caller must either guarantee that Index and Value are valid, or the caller + must establish proper exception handlers. This function is only available on + IA-32 and X64. + + @param Index The 32-bit MSR index to write. + @param Value The 64-bit value to write to the MSR. + + @return Value + +**/ +UINT64 +EFIAPI +AsmWriteMsr64 ( + IN UINT32 Index, + IN UINT64 Value + ); + + +/** + Reads a 64-bit MSR, performs a bitwise inclusive OR, and writes the result + back to the 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise inclusive OR + between the read result and the value specified by OrData, and writes the + result to the 64-bit MSR specified by Index. The value written to the MSR is + returned. No parameter checking is performed on Index or OrData, and some of + these may cause CPU exceptions. The caller must either guarantee that Index + and OrData are valid, or the caller must establish proper exception handlers. + This function is only available on IA-32 and X64. + + @param Index The 32-bit MSR index to write. + @param OrData The value to OR with the read value from the MSR. + + @return The value written back to the MSR. + +**/ +UINT64 +EFIAPI +AsmMsrOr64 ( + IN UINT32 Index, + IN UINT64 OrData + ); + + +/** + Reads a 64-bit MSR, performs a bitwise AND, and writes the result back to the + 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise AND between the + read result and the value specified by OrData, and writes the result to the + 64-bit MSR specified by Index. The value written to the MSR is returned. No + parameter checking is performed on Index or OrData, and some of these may + cause CPU exceptions. The caller must either guarantee that Index and OrData + are valid, or the caller must establish proper exception handlers. This + function is only available on IA-32 and X64. + + @param Index The 32-bit MSR index to write. + @param AndData The value to AND with the read value from the MSR. + + @return The value written back to the MSR. + +**/ +UINT64 +EFIAPI +AsmMsrAnd64 ( + IN UINT32 Index, + IN UINT64 AndData + ); + + +/** + Reads a 64-bit MSR, performs a bitwise AND followed by a bitwise inclusive + OR, and writes the result back to the 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise AND between read + result and the value specified by AndData, performs a bitwise inclusive OR + between the result of the AND operation and the value specified by OrData, + and writes the result to the 64-bit MSR specified by Index. The value written + to the MSR is returned. No parameter checking is performed on Index, AndData, + or OrData, and some of these may cause CPU exceptions. The caller must either + guarantee that Index, AndData, and OrData are valid, or the caller must + establish proper exception handlers. This function is only available on IA-32 + and X64. + + @param Index The 32-bit MSR index to write. + @param AndData The value to AND with the read value from the MSR. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the MSR. + +**/ +UINT64 +EFIAPI +AsmMsrAndThenOr64 ( + IN UINT32 Index, + IN UINT64 AndData, + IN UINT64 OrData + ); + + +/** + Reads a bit field of an MSR. + + Reads the bit field in the 64-bit MSR. The bit field is specified by the + StartBit and the EndBit. The value of the bit field is returned. The caller + must either guarantee that Index is valid, or the caller must set up + exception handlers to catch the exceptions. This function is only available + on IA-32 and X64. + + If StartBit is greater than 63, then ASSERT(). + If EndBit is greater than 63, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Index The 32-bit MSR index to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..63. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..63. + + @return The value read from the MSR. + +**/ +UINT64 +EFIAPI +AsmMsrBitFieldRead64 ( + IN UINT32 Index, + IN UINTN StartBit, + IN UINTN EndBit + ); + + +/** + Writes a bit field to an MSR. + + Writes Value to a bit field in a 64-bit MSR. The bit field is specified by + the StartBit and the EndBit. All other bits in the destination MSR are + preserved. The MSR written is returned. Extra left bits in Value are + stripped. The caller must either guarantee that Index and the data written is + valid, or the caller must set up exception handlers to catch the exceptions. + This function is only available on IA-32 and X64. + + If StartBit is greater than 63, then ASSERT(). + If EndBit is greater than 63, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Index The 32-bit MSR index to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..63. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..63. + @param Value New value of the bit field. + + @return The value written back to the MSR. + +**/ +UINT64 +EFIAPI +AsmMsrBitFieldWrite64 ( + IN UINT32 Index, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT64 Value + ); + + +/** + Reads a bit field in a 64-bit MSR, performs a bitwise inclusive OR, and + writes the result back to the bit field in the 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise inclusive OR + between the read result and the value specified by OrData, and writes the + result to the 64-bit MSR specified by Index. The value written to the MSR is + returned. Extra left bits in OrData are stripped. The caller must either + guarantee that Index and the data written is valid, or the caller must set up + exception handlers to catch the exceptions. This function is only available + on IA-32 and X64. + + If StartBit is greater than 63, then ASSERT(). + If EndBit is greater than 63, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Index The 32-bit MSR index to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..63. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..63. + @param OrData The value to OR with the read value from the bit field. + + @return The value written back to the MSR. + +**/ +UINT64 +EFIAPI +AsmMsrBitFieldOr64 ( + IN UINT32 Index, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT64 OrData + ); + + +/** + Reads a bit field in a 64-bit MSR, performs a bitwise AND, and writes the + result back to the bit field in the 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise AND between the + read result and the value specified by AndData, and writes the result to the + 64-bit MSR specified by Index. The value written to the MSR is returned. + Extra left bits in AndData are stripped. The caller must either guarantee + that Index and the data written is valid, or the caller must set up exception + handlers to catch the exceptions. This function is only available on IA-32 + and X64. + + If StartBit is greater than 63, then ASSERT(). + If EndBit is greater than 63, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Index The 32-bit MSR index to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..63. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..63. + @param AndData The value to AND with the read value from the bit field. + + @return The value written back to the MSR. + +**/ +UINT64 +EFIAPI +AsmMsrBitFieldAnd64 ( + IN UINT32 Index, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT64 AndData + ); + + +/** + Reads a bit field in a 64-bit MSR, performs a bitwise AND followed by a + bitwise inclusive OR, and writes the result back to the bit field in the + 64-bit MSR. + + Reads the 64-bit MSR specified by Index, performs a bitwise AND followed by + a bitwise inclusive OR between the read result and the value specified by + AndData, and writes the result to the 64-bit MSR specified by Index. The + value written to the MSR is returned. Extra left bits in both AndData and + OrData are stripped. The caller must either guarantee that Index and the data + written is valid, or the caller must set up exception handlers to catch the + exceptions. This function is only available on IA-32 and X64. + + If StartBit is greater than 63, then ASSERT(). + If EndBit is greater than 63, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Index The 32-bit MSR index to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..63. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..63. + @param AndData The value to AND with the read value from the bit field. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the MSR. + +**/ +UINT64 +EFIAPI +AsmMsrBitFieldAndThenOr64 ( + IN UINT32 Index, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT64 AndData, + IN UINT64 OrData + ); + + +/** + Reads the current value of the EFLAGS register. + + Reads and returns the current value of the EFLAGS register. This function is + only available on IA-32 and X64. This returns a 32-bit value on IA-32 and a + 64-bit value on X64. + + @return EFLAGS on IA-32 or RFLAGS on X64. + +**/ +UINTN +EFIAPI +AsmReadEflags ( + VOID + ); + + +/** + Reads the current value of the Control Register 0 (CR0). + + Reads and returns the current value of CR0. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of the Control Register 0 (CR0). + +**/ +UINTN +EFIAPI +AsmReadCr0 ( + VOID + ); + + +/** + Reads the current value of the Control Register 2 (CR2). + + Reads and returns the current value of CR2. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of the Control Register 2 (CR2). + +**/ +UINTN +EFIAPI +AsmReadCr2 ( + VOID + ); + + +/** + Reads the current value of the Control Register 3 (CR3). + + Reads and returns the current value of CR3. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of the Control Register 3 (CR3). + +**/ +UINTN +EFIAPI +AsmReadCr3 ( + VOID + ); + + +/** + Reads the current value of the Control Register 4 (CR4). + + Reads and returns the current value of CR4. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of the Control Register 4 (CR4). + +**/ +UINTN +EFIAPI +AsmReadCr4 ( + VOID + ); + + +/** + Writes a value to Control Register 0 (CR0). + + Writes and returns a new value to CR0. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Cr0 The value to write to CR0. + + @return The value written to CR0. + +**/ +UINTN +EFIAPI +AsmWriteCr0 ( + UINTN Cr0 + ); + + +/** + Writes a value to Control Register 2 (CR2). + + Writes and returns a new value to CR2. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Cr2 The value to write to CR2. + + @return The value written to CR2. + +**/ +UINTN +EFIAPI +AsmWriteCr2 ( + UINTN Cr2 + ); + + +/** + Writes a value to Control Register 3 (CR3). + + Writes and returns a new value to CR3. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Cr3 The value to write to CR3. + + @return The value written to CR3. + +**/ +UINTN +EFIAPI +AsmWriteCr3 ( + UINTN Cr3 + ); + + +/** + Writes a value to Control Register 4 (CR4). + + Writes and returns a new value to CR4. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Cr4 The value to write to CR4. + + @return The value written to CR4. + +**/ +UINTN +EFIAPI +AsmWriteCr4 ( + UINTN Cr4 + ); + + +/** + Reads the current value of Debug Register 0 (DR0). + + Reads and returns the current value of DR0. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of Debug Register 0 (DR0). + +**/ +UINTN +EFIAPI +AsmReadDr0 ( + VOID + ); + + +/** + Reads the current value of Debug Register 1 (DR1). + + Reads and returns the current value of DR1. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of Debug Register 1 (DR1). + +**/ +UINTN +EFIAPI +AsmReadDr1 ( + VOID + ); + + +/** + Reads the current value of Debug Register 2 (DR2). + + Reads and returns the current value of DR2. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of Debug Register 2 (DR2). + +**/ +UINTN +EFIAPI +AsmReadDr2 ( + VOID + ); + + +/** + Reads the current value of Debug Register 3 (DR3). + + Reads and returns the current value of DR3. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of Debug Register 3 (DR3). + +**/ +UINTN +EFIAPI +AsmReadDr3 ( + VOID + ); + + +/** + Reads the current value of Debug Register 4 (DR4). + + Reads and returns the current value of DR4. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of Debug Register 4 (DR4). + +**/ +UINTN +EFIAPI +AsmReadDr4 ( + VOID + ); + + +/** + Reads the current value of Debug Register 5 (DR5). + + Reads and returns the current value of DR5. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of Debug Register 5 (DR5). + +**/ +UINTN +EFIAPI +AsmReadDr5 ( + VOID + ); + + +/** + Reads the current value of Debug Register 6 (DR6). + + Reads and returns the current value of DR6. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of Debug Register 6 (DR6). + +**/ +UINTN +EFIAPI +AsmReadDr6 ( + VOID + ); + + +/** + Reads the current value of Debug Register 7 (DR7). + + Reads and returns the current value of DR7. This function is only available + on IA-32 and X64. This returns a 32-bit value on IA-32 and a 64-bit value on + X64. + + @return The value of Debug Register 7 (DR7). + +**/ +UINTN +EFIAPI +AsmReadDr7 ( + VOID + ); + + +/** + Writes a value to Debug Register 0 (DR0). + + Writes and returns a new value to DR0. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Dr0 The value to write to Dr0. + + @return The value written to Debug Register 0 (DR0). + +**/ +UINTN +EFIAPI +AsmWriteDr0 ( + UINTN Dr0 + ); + + +/** + Writes a value to Debug Register 1 (DR1). + + Writes and returns a new value to DR1. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Dr1 The value to write to Dr1. + + @return The value written to Debug Register 1 (DR1). + +**/ +UINTN +EFIAPI +AsmWriteDr1 ( + UINTN Dr1 + ); + + +/** + Writes a value to Debug Register 2 (DR2). + + Writes and returns a new value to DR2. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Dr2 The value to write to Dr2. + + @return The value written to Debug Register 2 (DR2). + +**/ +UINTN +EFIAPI +AsmWriteDr2 ( + UINTN Dr2 + ); + + +/** + Writes a value to Debug Register 3 (DR3). + + Writes and returns a new value to DR3. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Dr3 The value to write to Dr3. + + @return The value written to Debug Register 3 (DR3). + +**/ +UINTN +EFIAPI +AsmWriteDr3 ( + UINTN Dr3 + ); + + +/** + Writes a value to Debug Register 4 (DR4). + + Writes and returns a new value to DR4. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Dr4 The value to write to Dr4. + + @return The value written to Debug Register 4 (DR4). + +**/ +UINTN +EFIAPI +AsmWriteDr4 ( + UINTN Dr4 + ); + + +/** + Writes a value to Debug Register 5 (DR5). + + Writes and returns a new value to DR5. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Dr5 The value to write to Dr5. + + @return The value written to Debug Register 5 (DR5). + +**/ +UINTN +EFIAPI +AsmWriteDr5 ( + UINTN Dr5 + ); + + +/** + Writes a value to Debug Register 6 (DR6). + + Writes and returns a new value to DR6. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Dr6 The value to write to Dr6. + + @return The value written to Debug Register 6 (DR6). + +**/ +UINTN +EFIAPI +AsmWriteDr6 ( + UINTN Dr6 + ); + + +/** + Writes a value to Debug Register 7 (DR7). + + Writes and returns a new value to DR7. This function is only available on + IA-32 and X64. This writes a 32-bit value on IA-32 and a 64-bit value on X64. + + @param Dr7 The value to write to Dr7. + + @return The value written to Debug Register 7 (DR7). + +**/ +UINTN +EFIAPI +AsmWriteDr7 ( + UINTN Dr7 + ); + + +/** + Reads the current value of Code Segment Register (CS). + + Reads and returns the current value of CS. This function is only available on + IA-32 and X64. + + @return The current value of CS. + +**/ +UINT16 +EFIAPI +AsmReadCs ( + VOID + ); + + +/** + Reads the current value of Data Segment Register (DS). + + Reads and returns the current value of DS. This function is only available on + IA-32 and X64. + + @return The current value of DS. + +**/ +UINT16 +EFIAPI +AsmReadDs ( + VOID + ); + + +/** + Reads the current value of Extra Segment Register (ES). + + Reads and returns the current value of ES. This function is only available on + IA-32 and X64. + + @return The current value of ES. + +**/ +UINT16 +EFIAPI +AsmReadEs ( + VOID + ); + + +/** + Reads the current value of FS Data Segment Register (FS). + + Reads and returns the current value of FS. This function is only available on + IA-32 and X64. + + @return The current value of FS. + +**/ +UINT16 +EFIAPI +AsmReadFs ( + VOID + ); + + +/** + Reads the current value of GS Data Segment Register (GS). + + Reads and returns the current value of GS. This function is only available on + IA-32 and X64. + + @return The current value of GS. + +**/ +UINT16 +EFIAPI +AsmReadGs ( + VOID + ); + + +/** + Reads the current value of Stack Segment Register (SS). + + Reads and returns the current value of SS. This function is only available on + IA-32 and X64. + + @return The current value of SS. + +**/ +UINT16 +EFIAPI +AsmReadSs ( + VOID + ); + + +/** + Reads the current value of Task Register (TR). + + Reads and returns the current value of TR. This function is only available on + IA-32 and X64. + + @return The current value of TR. + +**/ +UINT16 +EFIAPI +AsmReadTr ( + VOID + ); + + +/** + Reads the current Global Descriptor Table Register(GDTR) descriptor. + + Reads and returns the current GDTR descriptor and returns it in Gdtr. This + function is only available on IA-32 and X64. + + If Gdtr is NULL, then ASSERT(). + + @param Gdtr Pointer to a GDTR descriptor. + +**/ +VOID +EFIAPI +AsmReadGdtr ( + OUT IA32_DESCRIPTOR *Gdtr + ); + + +/** + Writes the current Global Descriptor Table Register (GDTR) descriptor. + + Writes and the current GDTR descriptor specified by Gdtr. This function is + only available on IA-32 and X64. + + If Gdtr is NULL, then ASSERT(). + + @param Gdtr Pointer to a GDTR descriptor. + +**/ +VOID +EFIAPI +AsmWriteGdtr ( + IN CONST IA32_DESCRIPTOR *Gdtr + ); + + +/** + Reads the current Interrupt Descriptor Table Register(GDTR) descriptor. + + Reads and returns the current IDTR descriptor and returns it in Idtr. This + function is only available on IA-32 and X64. + + If Idtr is NULL, then ASSERT(). + + @param Idtr Pointer to a IDTR descriptor. + +**/ +VOID +EFIAPI +AsmReadIdtr ( + OUT IA32_DESCRIPTOR *Idtr + ); + + +/** + Writes the current Interrupt Descriptor Table Register(GDTR) descriptor. + + Writes the current IDTR descriptor and returns it in Idtr. This function is + only available on IA-32 and X64. + + If Idtr is NULL, then ASSERT(). + + @param Idtr Pointer to a IDTR descriptor. + +**/ +VOID +EFIAPI +AsmWriteIdtr ( + IN CONST IA32_DESCRIPTOR *Idtr + ); + + +/** + Reads the current Local Descriptor Table Register(LDTR) selector. + + Reads and returns the current 16-bit LDTR descriptor value. This function is + only available on IA-32 and X64. + + @return The current selector of LDT. + +**/ +UINT16 +EFIAPI +AsmReadLdtr ( + VOID + ); + + +/** + Writes the current Local Descriptor Table Register (GDTR) selector. + + Writes and the current LDTR descriptor specified by Ldtr. This function is + only available on IA-32 and X64. + + @param Ldtr 16-bit LDTR selector value. + +**/ +VOID +EFIAPI +AsmWriteLdtr ( + IN UINT16 Ldtr + ); + + +/** + Save the current floating point/SSE/SSE2 context to a buffer. + + Saves the current floating point/SSE/SSE2 state to the buffer specified by + Buffer. Buffer must be aligned on a 16-byte boundary. This function is only + available on IA-32 and X64. + + If Buffer is NULL, then ASSERT(). + If Buffer is not aligned on a 16-byte boundary, then ASSERT(). + + @param Buffer Pointer to a buffer to save the floating point/SSE/SSE2 context. + +**/ +VOID +EFIAPI +AsmFxSave ( + OUT IA32_FX_BUFFER *Buffer + ); + + +/** + Restores the current floating point/SSE/SSE2 context from a buffer. + + Restores the current floating point/SSE/SSE2 state from the buffer specified + by Buffer. Buffer must be aligned on a 16-byte boundary. This function is + only available on IA-32 and X64. + + If Buffer is NULL, then ASSERT(). + If Buffer is not aligned on a 16-byte boundary, then ASSERT(). + If Buffer was not saved with AsmFxSave(), then ASSERT(). + + @param Buffer Pointer to a buffer to save the floating point/SSE/SSE2 context. + +**/ +VOID +EFIAPI +AsmFxRestore ( + IN CONST IA32_FX_BUFFER *Buffer + ); + + +/** + Reads the current value of 64-bit MMX Register #0 (MM0). + + Reads and returns the current value of MM0. This function is only available + on IA-32 and X64. + + @return The current value of MM0. + +**/ +UINT64 +EFIAPI +AsmReadMm0 ( + VOID + ); + + +/** + Reads the current value of 64-bit MMX Register #1 (MM1). + + Reads and returns the current value of MM1. This function is only available + on IA-32 and X64. + + @return The current value of MM1. + +**/ +UINT64 +EFIAPI +AsmReadMm1 ( + VOID + ); + + +/** + Reads the current value of 64-bit MMX Register #2 (MM2). + + Reads and returns the current value of MM2. This function is only available + on IA-32 and X64. + + @return The current value of MM2. + +**/ +UINT64 +EFIAPI +AsmReadMm2 ( + VOID + ); + + +/** + Reads the current value of 64-bit MMX Register #3 (MM3). + + Reads and returns the current value of MM3. This function is only available + on IA-32 and X64. + + @return The current value of MM3. + +**/ +UINT64 +EFIAPI +AsmReadMm3 ( + VOID + ); + + +/** + Reads the current value of 64-bit MMX Register #4 (MM4). + + Reads and returns the current value of MM4. This function is only available + on IA-32 and X64. + + @return The current value of MM4. + +**/ +UINT64 +EFIAPI +AsmReadMm4 ( + VOID + ); + + +/** + Reads the current value of 64-bit MMX Register #5 (MM5). + + Reads and returns the current value of MM5. This function is only available + on IA-32 and X64. + + @return The current value of MM5. + +**/ +UINT64 +EFIAPI +AsmReadMm5 ( + VOID + ); + + +/** + Reads the current value of 64-bit MMX Register #6 (MM6). + + Reads and returns the current value of MM6. This function is only available + on IA-32 and X64. + + @return The current value of MM6. + +**/ +UINT64 +EFIAPI +AsmReadMm6 ( + VOID + ); + + +/** + Reads the current value of 64-bit MMX Register #7 (MM7). + + Reads and returns the current value of MM7. This function is only available + on IA-32 and X64. + + @return The current value of MM7. + +**/ +UINT64 +EFIAPI +AsmReadMm7 ( + VOID + ); + + +/** + Writes the current value of 64-bit MMX Register #0 (MM0). + + Writes the current value of MM0. This function is only available on IA32 and + X64. + + @param Value The 64-bit value to write to MM0. + +**/ +VOID +EFIAPI +AsmWriteMm0 ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit MMX Register #1 (MM1). + + Writes the current value of MM1. This function is only available on IA32 and + X64. + + @param Value The 64-bit value to write to MM1. + +**/ +VOID +EFIAPI +AsmWriteMm1 ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit MMX Register #2 (MM2). + + Writes the current value of MM2. This function is only available on IA32 and + X64. + + @param Value The 64-bit value to write to MM2. + +**/ +VOID +EFIAPI +AsmWriteMm2 ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit MMX Register #3 (MM3). + + Writes the current value of MM3. This function is only available on IA32 and + X64. + + @param Value The 64-bit value to write to MM3. + +**/ +VOID +EFIAPI +AsmWriteMm3 ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit MMX Register #4 (MM4). + + Writes the current value of MM4. This function is only available on IA32 and + X64. + + @param Value The 64-bit value to write to MM4. + +**/ +VOID +EFIAPI +AsmWriteMm4 ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit MMX Register #5 (MM5). + + Writes the current value of MM5. This function is only available on IA32 and + X64. + + @param Value The 64-bit value to write to MM5. + +**/ +VOID +EFIAPI +AsmWriteMm5 ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit MMX Register #6 (MM6). + + Writes the current value of MM6. This function is only available on IA32 and + X64. + + @param Value The 64-bit value to write to MM6. + +**/ +VOID +EFIAPI +AsmWriteMm6 ( + IN UINT64 Value + ); + + +/** + Writes the current value of 64-bit MMX Register #7 (MM7). + + Writes the current value of MM7. This function is only available on IA32 and + X64. + + @param Value The 64-bit value to write to MM7. + +**/ +VOID +EFIAPI +AsmWriteMm7 ( + IN UINT64 Value + ); + + +/** + Reads the current value of Time Stamp Counter (TSC). + + Reads and returns the current value of TSC. This function is only available + on IA-32 and X64. + + @return The current value of TSC + +**/ +UINT64 +EFIAPI +AsmReadTsc ( + VOID + ); + + +/** + Reads the current value of a Performance Counter (PMC). + + Reads and returns the current value of performance counter specified by + Index. This function is only available on IA-32 and X64. + + @param Index The 32-bit Performance Counter index to read. + + @return The value of the PMC specified by Index. + +**/ +UINT64 +EFIAPI +AsmReadPmc ( + IN UINT32 Index + ); + + +/** + Sets up a monitor buffer that is used by AsmMwait(). + + Executes a MONITOR instruction with the register state specified by Eax, Ecx + and Edx. Returns Eax. This function is only available on IA-32 and X64. + + @param Eax The value to load into EAX or RAX before executing the MONITOR + instruction. + @param Ecx The value to load into ECX or RCX before executing the MONITOR + instruction. + @param Edx The value to load into EDX or RDX before executing the MONITOR + instruction. + + @return Eax + +**/ +UINTN +EFIAPI +AsmMonitor ( + IN UINTN Eax, + IN UINTN Ecx, + IN UINTN Edx + ); + + +/** + Executes an MWAIT instruction. + + Executes an MWAIT instruction with the register state specified by Eax and + Ecx. Returns Eax. This function is only available on IA-32 and X64. + + @param Eax The value to load into EAX or RAX before executing the MONITOR + instruction. + @param Ecx The value to load into ECX or RCX before executing the MONITOR + instruction. + + @return Eax + +**/ +UINTN +EFIAPI +AsmMwait ( + IN UINTN Eax, + IN UINTN Ecx + ); + + +/** + Executes a WBINVD instruction. + + Executes a WBINVD instruction. This function is only available on IA-32 and + X64. + +**/ +VOID +EFIAPI +AsmWbinvd ( + VOID + ); + + +/** + Executes a INVD instruction. + + Executes a INVD instruction. This function is only available on IA-32 and + X64. + +**/ +VOID +EFIAPI +AsmInvd ( + VOID + ); + + +/** + Flushes a cache line from all the instruction and data caches within the + coherency domain of the CPU. + + Flushed the cache line specified by LinearAddress, and returns LinearAddress. + This function is only available on IA-32 and X64. + + @param LinearAddress The address of the cache line to flush. If the CPU is + in a physical addressing mode, then LinearAddress is a + physical address. If the CPU is in a virtual + addressing mode, then LinearAddress is a virtual + address. + + @return LinearAddress +**/ +VOID * +EFIAPI +AsmFlushCacheLine ( + IN VOID *LinearAddress + ); + + +/** + Enables the 32-bit paging mode on the CPU. + + Enables the 32-bit paging mode on the CPU. CR0, CR3, CR4, and the page tables + must be properly initialized prior to calling this service. This function + assumes the current execution mode is 32-bit protected mode. This function is + only available on IA-32. After the 32-bit paging mode is enabled, control is + transferred to the function specified by EntryPoint using the new stack + specified by NewStack and passing in the parameters specified by Context1 and + Context2. Context1 and Context2 are optional and may be NULL. The function + EntryPoint must never return. + + If the current execution mode is not 32-bit protected mode, then ASSERT(). + If EntryPoint is NULL, then ASSERT(). + If NewStack is NULL, then ASSERT(). + + There are a number of constraints that must be followed before calling this + function: + 1) Interrupts must be disabled. + 2) The caller must be in 32-bit protected mode with flat descriptors. This + means all descriptors must have a base of 0 and a limit of 4GB. + 3) CR0 and CR4 must be compatible with 32-bit protected mode with flat + descriptors. + 4) CR3 must point to valid page tables that will be used once the transition + is complete, and those page tables must guarantee that the pages for this + function and the stack are identity mapped. + + @param EntryPoint A pointer to function to call with the new stack after + paging is enabled. + @param Context1 A pointer to the context to pass into the EntryPoint + function as the first parameter after paging is enabled. + @param Context2 A pointer to the context to pass into the EntryPoint + function as the second parameter after paging is enabled. + @param NewStack A pointer to the new stack to use for the EntryPoint + function after paging is enabled. + +**/ +VOID +EFIAPI +AsmEnablePaging32 ( + IN SWITCH_STACK_ENTRY_POINT EntryPoint, + IN VOID *Context1, OPTIONAL + IN VOID *Context2, OPTIONAL + IN VOID *NewStack + ); + + +/** + Disables the 32-bit paging mode on the CPU. + + Disables the 32-bit paging mode on the CPU and returns to 32-bit protected + mode. This function assumes the current execution mode is 32-paged protected + mode. This function is only available on IA-32. After the 32-bit paging mode + is disabled, control is transferred to the function specified by EntryPoint + using the new stack specified by NewStack and passing in the parameters + specified by Context1 and Context2. Context1 and Context2 are optional and + may be NULL. The function EntryPoint must never return. + + If the current execution mode is not 32-bit paged mode, then ASSERT(). + If EntryPoint is NULL, then ASSERT(). + If NewStack is NULL, then ASSERT(). + + There are a number of constraints that must be followed before calling this + function: + 1) Interrupts must be disabled. + 2) The caller must be in 32-bit paged mode. + 3) CR0, CR3, and CR4 must be compatible with 32-bit paged mode. + 4) CR3 must point to valid page tables that guarantee that the pages for + this function and the stack are identity mapped. + + @param EntryPoint A pointer to function to call with the new stack after + paging is disabled. + @param Context1 A pointer to the context to pass into the EntryPoint + function as the first parameter after paging is disabled. + @param Context2 A pointer to the context to pass into the EntryPoint + function as the second parameter after paging is + disabled. + @param NewStack A pointer to the new stack to use for the EntryPoint + function after paging is disabled. + +**/ +VOID +EFIAPI +AsmDisablePaging32 ( + IN SWITCH_STACK_ENTRY_POINT EntryPoint, + IN VOID *Context1, OPTIONAL + IN VOID *Context2, OPTIONAL + IN VOID *NewStack + ); + + +/** + Enables the 64-bit paging mode on the CPU. + + Enables the 64-bit paging mode on the CPU. CR0, CR3, CR4, and the page tables + must be properly initialized prior to calling this service. This function + assumes the current execution mode is 32-bit protected mode with flat + descriptors. This function is only available on IA-32. After the 64-bit + paging mode is enabled, control is transferred to the function specified by + EntryPoint using the new stack specified by NewStack and passing in the + parameters specified by Context1 and Context2. Context1 and Context2 are + optional and may be 0. The function EntryPoint must never return. + + If the current execution mode is not 32-bit protected mode with flat + descriptors, then ASSERT(). + If EntryPoint is 0, then ASSERT(). + If NewStack is 0, then ASSERT(). + + @param Cs The 16-bit selector to load in the CS before EntryPoint + is called. The descriptor in the GDT that this selector + references must be setup for long mode. + @param EntryPoint The 64-bit virtual address of the function to call with + the new stack after paging is enabled. + @param Context1 The 64-bit virtual address of the context to pass into + the EntryPoint function as the first parameter after + paging is enabled. + @param Context2 The 64-bit virtual address of the context to pass into + the EntryPoint function as the second parameter after + paging is enabled. + @param NewStack The 64-bit virtual address of the new stack to use for + the EntryPoint function after paging is enabled. + +**/ +VOID +EFIAPI +AsmEnablePaging64 ( + IN UINT16 CodeSelector, + IN UINT64 EntryPoint, + IN UINT64 Context1, OPTIONAL + IN UINT64 Context2, OPTIONAL + IN UINT64 NewStack + ); + + +/** + Disables the 64-bit paging mode on the CPU. + + Disables the 64-bit paging mode on the CPU and returns to 32-bit protected + mode. This function assumes the current execution mode is 64-paging mode. + This function is only available on X64. After the 64-bit paging mode is + disabled, control is transferred to the function specified by EntryPoint + using the new stack specified by NewStack and passing in the parameters + specified by Context1 and Context2. Context1 and Context2 are optional and + may be 0. The function EntryPoint must never return. + + If the current execution mode is not 64-bit paged mode, then ASSERT(). + If EntryPoint is 0, then ASSERT(). + If NewStack is 0, then ASSERT(). + + @param Cs The 16-bit selector to load in the CS before EntryPoint + is called. The descriptor in the GDT that this selector + references must be setup for 32-bit protected mode. + @param EntryPoint The 64-bit virtual address of the function to call with + the new stack after paging is disabled. + @param Context1 The 64-bit virtual address of the context to pass into + the EntryPoint function as the first parameter after + paging is disabled. + @param Context2 The 64-bit virtual address of the context to pass into + the EntryPoint function as the second parameter after + paging is disabled. + @param NewStack The 64-bit virtual address of the new stack to use for + the EntryPoint function after paging is disabled. + +**/ +VOID +EFIAPI +AsmDisablePaging64 ( + IN UINT16 CodeSelector, + IN UINT32 EntryPoint, + IN UINT32 Context1, OPTIONAL + IN UINT32 Context2, OPTIONAL + IN UINT32 NewStack + ); + + +// +// 16-bit thunking services +// + +/** + Retrieves the properties for 16-bit thunk functions. + + Computes the size of the buffer and stack below 1MB required to use the + AsmPrepareThunk16(), AsmThunk16() and AsmPrepareAndThunk16() functions. This + buffer size is returned in RealModeBufferSize, and the stack size is returned + in ExtraStackSize. If parameters are passed to the 16-bit real mode code, + then the actual minimum stack size is ExtraStackSize plus the maximum number + of bytes that need to be passed to the 16-bit real mode code. + + If RealModeBufferSize is NULL, then ASSERT(). + If ExtraStackSize is NULL, then ASSERT(). + + @param RealModeBufferSize A pointer to the size of the buffer below 1MB + required to use the 16-bit thunk functions. + @param ExtraStackSize A pointer to the extra size of stack below 1MB + that the 16-bit thunk functions require for + temporary storage in the transition to and from + 16-bit real mode. + +**/ +VOID +EFIAPI +AsmGetThunk16Properties ( + OUT UINT32 *RealModeBufferSize, + OUT UINT32 *ExtraStackSize + ); + + +/** + Prepares all structures a code required to use AsmThunk16(). + + Prepares all structures and code required to use AsmThunk16(). + + If ThunkContext is NULL, then ASSERT(). + + @param ThunkContext A pointer to the context structure that describes the + 16-bit real mode code to call. + +**/ +VOID +EFIAPI +AsmPrepareThunk16 ( + OUT THUNK_CONTEXT *ThunkContext + ); + + +/** + Transfers control to a 16-bit real mode entry point and returns the results. + + Transfers control to a 16-bit real mode entry point and returns the results. + AsmPrepareThunk16() must be called with ThunkContext before this function is + used. + + If ThunkContext is NULL, then ASSERT(). + If AsmPrepareThunk16() was not previously called with ThunkContext, then ASSERT(). + + @param ThunkContext A pointer to the context structure that describes the + 16-bit real mode code to call. + +**/ +VOID +EFIAPI +AsmThunk16 ( + IN OUT THUNK_CONTEXT *ThunkContext + ); + + +/** + Prepares all structures and code for a 16-bit real mode thunk, transfers + control to a 16-bit real mode entry point, and returns the results. + + Prepares all structures and code for a 16-bit real mode thunk, transfers + control to a 16-bit real mode entry point, and returns the results. If the + caller only need to perform a single 16-bit real mode thunk, then this + service should be used. If the caller intends to make more than one 16-bit + real mode thunk, then it is more efficient if AsmPrepareThunk16() is called + once and AsmThunk16() can be called for each 16-bit real mode thunk. + + If ThunkContext is NULL, then ASSERT(). + + @param ThunkContext A pointer to the context structure that describes the + 16-bit real mode code to call. + +**/ +VOID +EFIAPI +AsmPrepareAndThunk16 ( + IN OUT THUNK_CONTEXT *ThunkContext + ); + +#else + +#endif + +#endif + + diff --git a/MdePkg/Include/Library/PalCallLib.h b/MdePkg/Include/Library/PalCallLib.h index e0004c38ac..c0b06e4b3f 100644 --- a/MdePkg/Include/Library/PalCallLib.h +++ b/MdePkg/Include/Library/PalCallLib.h @@ -1069,7 +1069,7 @@ typedef struct { PAL Procedure - PAL_FIXED_ADDR. - Return the fixed component of a processor¡¯s directed address. + Return the fixed component of a processor's directed address. It is required by IPF. It is required by IPF. The PAL procedure supports the Static Registers calling convention. It could be called at physical mode and virtual mode. @@ -3239,7 +3239,7 @@ typedef struct { /** @param Mode Bit2:0, Indicates the mode of operation for this - procedure: 0 - Query mode 1 ¨C Error inject mode + procedure: 0 - Query mode 1 - Error inject mode (err_inj should also be specified) 2 - Cancel outstanding trigger. All other fields in PAL_MC_ERROR_TYPE_INFO, @@ -3409,7 +3409,7 @@ typedef struct { /** - Buffer Pointed to by err_data_buffer ¨C TLB + Buffer Pointed to by err_data_buffer - TLB **/ typedef struct { @@ -3865,7 +3865,7 @@ typedef struct { when transitioning to virtual mode operations. - @return R9 Virtualization Service Address ¨C VSA specifies + @return R9 Virtualization Service Address - VSA specifies the virtual base address of the PAL virtualization services in this virtual environment. @@ -4037,7 +4037,7 @@ typedef struct { as required or optional. If a PAL procedure is specified as optional, a unique return code of 0xFFFFFFFFFFFFFFFF is returned in the Status field of the PAL_CALL_RETURN structure. This indicates that the procedure is not present in this PAL implementation. It is the - caller¡¯s responsibility to check for this return code after calling any optional PAL + caller's responsibility to check for this return code after calling any optional PAL procedure. No parameter checking is performed on the 4 input parameters, but there are some common rules that the caller should follow when making a PAL call. Any address passed to PAL as buffers for return parameters must be 8-byte aligned. Unaligned addresses diff --git a/MdePkg/Include/Pi/PiHob.h b/MdePkg/Include/Pi/PiHob.h index f7a0ba0166..b2a47fb40c 100644 --- a/MdePkg/Include/Pi/PiHob.h +++ b/MdePkg/Include/Pi/PiHob.h @@ -91,7 +91,7 @@ typedef struct { EFI_HOB_GENERIC_HEADER Header; EFI_HOB_MEMORY_ALLOCATION_HEADER AllocDescriptor; // - // Additional data pertaining to the ¡°Name¡± Guid memory + // Additional data pertaining to the "Name" Guid memory // may go here. // } EFI_HOB_MEMORY_ALLOCATION; @@ -109,7 +109,7 @@ typedef struct { // // Defines the location of the boot-strap -// processor (BSP) BSPStore (¡°Backing Store Pointer Store¡±). +// processor (BSP) BSPStore ("Backing Store Pointer Store"). // This HOB is valid for the Itanium processor family only // register overflow store. // diff --git a/MdePkg/Include/Ppi/Decompress.h b/MdePkg/Include/Ppi/Decompress.h index 1c013bea2d..87b893ccd2 100644 --- a/MdePkg/Include/Ppi/Decompress.h +++ b/MdePkg/Include/Ppi/Decompress.h @@ -60,7 +60,7 @@ EFI_STATUS /** - This PPI¡¯s single member function decompresses a compression + This PPI's single member function decompresses a compression encapsulated section. It is used by the PEI Foundation to process sectioned files. Prior to the installation of this PPI, compression sections will be ignored. diff --git a/MdePkg/Include/Ppi/ReadOnlyVariable2.h b/MdePkg/Include/Ppi/ReadOnlyVariable2.h index f4f85086ca..566d5f121e 100644 --- a/MdePkg/Include/Ppi/ReadOnlyVariable2.h +++ b/MdePkg/Include/Ppi/ReadOnlyVariable2.h @@ -33,12 +33,12 @@ typedef struct _EFI_PEI_READ_ONLY_VARIABLE2_PPI EFI_PEI_READ_ONLY_VARIABLE2_PPI @param This A pointer to this instance of the EFI_PEI_READ_ONLY_VARIABLE2_PPI. - @param VariableName A pointer to a null-terminated string that is the variable¡¯s name. + @param VariableName A pointer to a null-terminated string that is the variable's name. - @param VendorGuid A pointer to an EFI_GUID that is the variable¡¯s GUID. The combination of + @param VendorGuid A pointer to an EFI_GUID that is the variable's GUID. The combination of VariableGuid and VariableName must be unique. - @param Attributes If non-NULL, on return, points to the variable¡¯s attributes. See ¡°Related Definitons¡± + @param Attributes If non-NULL, on return, points to the variable's attributes. See "Related Definitons" below for possible attribute values. @param DataSize On entry, points to the size in bytes of the Data buffer. On return, points to the size of @@ -84,11 +84,11 @@ EFI_STATUS @param VariableNameSize On entry, points to the size of the buffer pointed to by VariableName. - @param VariableName On entry, a pointer to a null-terminated string that is the variable¡¯s name. - On return, points to the next variable¡¯s null-terminated name string. + @param VariableName On entry, a pointer to a null-terminated string that is the variable's name. + On return, points to the next variable's null-terminated name string. - @param VendorGuid On entry, a pointer to an UEFI _GUID that is the variable¡¯s GUID. - On return, a pointer to the next variable¡¯s GUID. + @param VendorGuid On entry, a pointer to an UEFI _GUID that is the variable's GUID. + On return, a pointer to the next variable's GUID. @retval EFI_SUCCESS The variable was read successfully. diff --git a/MdePkg/Include/Protocol/HiiFont.h b/MdePkg/Include/Protocol/HiiFont.h index 644416f6e5..df9bbac93f 100644 --- a/MdePkg/Include/Protocol/HiiFont.h +++ b/MdePkg/Include/Protocol/HiiFont.h @@ -308,7 +308,7 @@ EFI_STATUS EFI_HII_OUT_FLAG_CLIP_CLEAN_X is set. This flag cannot be used with EFI_HII_OUT_FLAG_CLIP_CLEAN_X. If EFI_HII_OUT_FLAG_TRANSPARENT is set, then BackgroundColor is - ignored and all off¡± pixels in the character¡¯s glyph will + ignored and all off" pixels in the character's glyph will use the pixel value from Blt. This flag cannot be used if Blt is NULL upon entry. If EFI_HII_IGNORE_IF_NO_GLYPH is set, then characters which have no glyphs are not drawn. Otherwise, they diff --git a/MdePkg/Include/Protocol/PlatformToDriverConfiguration.h b/MdePkg/Include/Protocol/PlatformToDriverConfiguration.h index c1f346de29..686e271c82 100644 --- a/MdePkg/Include/Protocol/PlatformToDriverConfiguration.h +++ b/MdePkg/Include/Protocol/PlatformToDriverConfiguration.h @@ -268,7 +268,7 @@ EFI_STATUS configuration information from the platform. For every call to Query() there must be a matching call to Response() so the UEFI driver can inform the platform how it used the - information passed in from Query(). It¡¯s legal for a UEFI + information passed in from Query(). It's legal for a UEFI driver to use Response() to inform the platform it does not understand the data returned via Query() and thus no action was taken. diff --git a/MdePkg/Include/Protocol/TcgService.h b/MdePkg/Include/Protocol/TcgService.h index 5fe9a2e0bb..2d67d33fe3 100644 --- a/MdePkg/Include/Protocol/TcgService.h +++ b/MdePkg/Include/Protocol/TcgService.h @@ -1,16 +1,16 @@ -/** @file +/** @file TCG Service Protocol as defined in TCG_EFI_Protocol_1_20_Final - See http://trustedcomputinggroup.org for the latest specification - - Copyright (c) 2007, Intel Corporation - All rights reserved. This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - + See http://trustedcomputinggroup.org for the latest specification + + Copyright (c) 2007, Intel Corporation + All rights reserved. This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + **/ #ifndef _TCG_SERVICE_PROTOCOL_H_ @@ -213,7 +213,7 @@ EFI_STATUS @param LogEvent This service abstracts the capability to add an entry to the Event Log. @param PassThroughToTPM This service provides a pass-through capability - from the caller to the system¡¯s TPM. + from the caller to the system's TPM. @param HashLogExtendEvent This service abstracts the capability to do a hash operation on a data buffer, extend a specific TPM PCR with the hash result, and add an entry to the Event Log. diff --git a/MdePkg/Include/Uefi/UefiInternalFormRepresentation.h b/MdePkg/Include/Uefi/UefiInternalFormRepresentation.h index dd7247fe8d..d30a096893 100644 --- a/MdePkg/Include/Uefi/UefiInternalFormRepresentation.h +++ b/MdePkg/Include/Uefi/UefiInternalFormRepresentation.h @@ -1397,8 +1397,8 @@ typedef struct { #define EFI_AFFECTED_BY_STANDARD_SHIFT 0x0001 // // This key is affected by the caps lock so that if a keyboard driver -// would need to disambiguate between a key which had a ¡°1¡± defined -// versus a ¡°a¡± character. Having this bit turned on would tell +// would need to disambiguate between a key which had a "1" defined +// versus a "a" character. Having this bit turned on would tell // the keyboard driver to use the appropriate shifted state or not. // #define EFI_AFFECTED_BY_CAPS_LOCK 0x0002 diff --git a/MdePkg/Include/Uefi/UefiSpec.h b/MdePkg/Include/Uefi/UefiSpec.h index b356c35947..3d55a2cb27 100644 --- a/MdePkg/Include/Uefi/UefiSpec.h +++ b/MdePkg/Include/Uefi/UefiSpec.h @@ -318,7 +318,7 @@ EFI_STATUS // -// These types can be ORed together as needed ¨C for example, +// These types can be ORed together as needed - for example, // EVT_TIMER might be Ored with EVT_NOTIFY_WAIT or // EVT_NOTIFY_SIGNAL. // @@ -341,7 +341,7 @@ EFI_STATUS #define EFI_EVENT_SIGNAL_VIRTUAL_ADDRESS_CHANGE EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE // -// The event¡¯s NotifyContext pointer points to a runtime memory +// The event's NotifyContext pointer points to a runtime memory // address. // The event is deprecated in UEFI2.0 and later specifications. // diff --git a/MdePkg/Library/BaseLib/Ipf/AsmPalCall.s b/MdePkg/Library/BaseLib/Ipf/AsmPalCall.s index 9e70a78729..ba0072dd93 100644 --- a/MdePkg/Library/BaseLib/Ipf/AsmPalCall.s +++ b/MdePkg/Library/BaseLib/Ipf/AsmPalCall.s @@ -28,7 +28,7 @@ // as optional, a unique return code of 0xFFFFFFFFFFFFFFFF is returned in the // Status field of the PAL_CALL_RETURN structure. // This indicates that the procedure is not present in this PAL implementation. -// It is the caller¡¯s responsibility to check for this return code after calling +// It is the caller's responsibility to check for this return code after calling // any optional PAL procedure. // No parameter checking is performed on the 5 input parameters, but there are // some common rules that the caller should follow when making a PAL call. Any diff --git a/MdePkg/Library/BasePalCallLibNull/PalCall.c b/MdePkg/Library/BasePalCallLibNull/PalCall.c index 0c1d137d67..74c33067ee 100644 --- a/MdePkg/Library/BasePalCallLibNull/PalCall.c +++ b/MdePkg/Library/BasePalCallLibNull/PalCall.c @@ -24,7 +24,7 @@ as required or optional. If a PAL procedure is specified as optional, a unique return code of 0xFFFFFFFFFFFFFFFF is returned in the Status field of the PAL_CALL_RETURN structure. This indicates that the procedure is not present in this PAL implementation. It is the - caller¡¯s responsibility to check for this return code after calling any optional PAL + caller's responsibility to check for this return code after calling any optional PAL procedure. No parameter checking is performed on the 4 input parameters, but there are some common rules that the caller should follow when making a PAL call. Any address passed to PAL as buffers for return parameters must be 8-byte aligned. Unaligned addresses diff --git a/MdePkg/Library/PeiPalCallLib/PalCallLib.c b/MdePkg/Library/PeiPalCallLib/PalCallLib.c index eeb30d617d..b1a9b10cb7 100644 --- a/MdePkg/Library/PeiPalCallLib/PalCallLib.c +++ b/MdePkg/Library/PeiPalCallLib/PalCallLib.c @@ -33,7 +33,7 @@ as required or optional. If a PAL procedure is specified as optional, a unique return code of 0xFFFFFFFFFFFFFFFF is returned in the Status field of the PAL_CALL_RETURN structure. This indicates that the procedure is not present in this PAL implementation. It is the - caller¡¯s responsibility to check for this return code after calling any optional PAL + caller's responsibility to check for this return code after calling any optional PAL procedure. No parameter checking is performed on the 4 input parameters, but there are some common rules that the caller should follow when making a PAL call. Any address passed to PAL as buffers for return parameters must be 8-byte aligned. Unaligned addresses