diff --git a/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/ComponentName.c b/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/ComponentName.c new file mode 100644 index 0000000000..2b7cb92c64 --- /dev/null +++ b/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/ComponentName.c @@ -0,0 +1,208 @@ +/*++ + +Copyright (c) 2006, Intel Corporation +All rights reserved. This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +Module Name: + + ComponentName.c + +Abstract: + +--*/ + +#include "UnixSerialIo.h" + +// +// EFI Component Name Functions +// +EFI_STATUS +EFIAPI +UnixSerialIoComponentNameGetDriverName ( + IN EFI_COMPONENT_NAME_PROTOCOL *This, + IN CHAR8 *Language, + OUT CHAR16 **DriverName + ); + +EFI_STATUS +EFIAPI +UnixSerialIoComponentNameGetControllerName ( + IN EFI_COMPONENT_NAME_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_HANDLE ChildHandle OPTIONAL, + IN CHAR8 *Language, + OUT CHAR16 **ControllerName + ); + +// +// EFI Component Name Protocol +// +EFI_COMPONENT_NAME_PROTOCOL gUnixSerialIoComponentName = { + UnixSerialIoComponentNameGetDriverName, + UnixSerialIoComponentNameGetControllerName, + "eng" +}; + +static EFI_UNICODE_STRING_TABLE mUnixSerialIoDriverNameTable[] = { + { "eng", L"Unix Serial I/O Driver" }, + { NULL , NULL } +}; + +EFI_STATUS +EFIAPI +UnixSerialIoComponentNameGetDriverName ( + IN EFI_COMPONENT_NAME_PROTOCOL *This, + IN CHAR8 *Language, + OUT CHAR16 **DriverName + ) +/*++ + + Routine Description: + Retrieves a Unicode string that is the user readable name of the EFI Driver. + + Arguments: + This - A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance. + Language - A pointer to a three character ISO 639-2 language identifier. + This is the language of the driver name that that the caller + is requesting, and it must match one of the languages specified + in SupportedLanguages. The number of languages supported by a + driver is up to the driver writer. + DriverName - A pointer to the Unicode string to return. This Unicode string + is the name of the driver specified by This in the language + specified by Language. + + Returns: + EFI_SUCCESS - The Unicode string for the Driver specified by This + and the language specified by Language was returned + in DriverName. + EFI_INVALID_PARAMETER - Language is NULL. + EFI_INVALID_PARAMETER - DriverName is NULL. + EFI_UNSUPPORTED - The driver specified by This does not support the + language specified by Language. + +--*/ +{ + return LookupUnicodeString ( + Language, + gUnixSerialIoComponentName.SupportedLanguages, + mUnixSerialIoDriverNameTable, + DriverName + ); +} + +EFI_STATUS +EFIAPI +UnixSerialIoComponentNameGetControllerName ( + IN EFI_COMPONENT_NAME_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_HANDLE ChildHandle OPTIONAL, + IN CHAR8 *Language, + OUT CHAR16 **ControllerName + ) +/*++ + + Routine Description: + Retrieves a Unicode string that is the user readable name of the controller + that is being managed by an EFI Driver. + + Arguments: + This - A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance. + ControllerHandle - The handle of a controller that the driver specified by + This is managing. This handle specifies the controller + whose name is to be returned. + ChildHandle - The handle of the child controller to retrieve the name + of. This is an optional parameter that may be NULL. It + will be NULL for device drivers. It will also be NULL + for a bus drivers that wish to retrieve the name of the + bus controller. It will not be NULL for a bus driver + that wishes to retrieve the name of a child controller. + Language - A pointer to a three character ISO 639-2 language + identifier. This is the language of the controller name + that that the caller is requesting, and it must match one + of the languages specified in SupportedLanguages. The + number of languages supported by a driver is up to the + driver writer. + ControllerName - A pointer to the Unicode string to return. This Unicode + string is the name of the controller specified by + ControllerHandle and ChildHandle in the language specified + by Language from the point of view of the driver specified + by This. + + Returns: + EFI_SUCCESS - The Unicode string for the user readable name in the + language specified by Language for the driver + specified by This was returned in DriverName. + EFI_INVALID_PARAMETER - ControllerHandle is not a valid EFI_HANDLE. + EFI_INVALID_PARAMETER - ChildHandle is not NULL and it is not a valid EFI_HANDLE. + EFI_INVALID_PARAMETER - Language is NULL. + EFI_INVALID_PARAMETER - ControllerName is NULL. + EFI_UNSUPPORTED - The driver specified by This is not currently managing + the controller specified by ControllerHandle and + ChildHandle. + EFI_UNSUPPORTED - The driver specified by This does not support the + language specified by Language. + +--*/ +{ + EFI_STATUS Status; + EFI_SERIAL_IO_PROTOCOL *SerialIo; + UNIX_SERIAL_IO_PRIVATE_DATA *Private; + + // + // Make sure this driver is currently managing ControllHandle + // + Status = EfiTestManagedDevice ( + ControllerHandle, + gUnixSerialIoDriverBinding.DriverBindingHandle, + &gEfiUnixIoProtocolGuid + ); + if (EFI_ERROR (Status)) { + return Status; + } + + // + // This is a bus driver, so ChildHandle must not be NULL. + // + if (ChildHandle == NULL) { + return EFI_UNSUPPORTED; + } + + Status = EfiTestChildHandle ( + ControllerHandle, + ChildHandle, + &gEfiUnixIoProtocolGuid + ); + if (EFI_ERROR (Status)) { + return Status; + } + + // + // Get our context back + // + Status = gBS->OpenProtocol ( + ChildHandle, + &gEfiSerialIoProtocolGuid, + (VOID**)&SerialIo, + gUnixSerialIoDriverBinding.DriverBindingHandle, + ChildHandle, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (EFI_ERROR (Status)) { + return EFI_UNSUPPORTED; + } + + Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (SerialIo); + + return LookupUnicodeString ( + Language, + gUnixSerialIoComponentName.SupportedLanguages, + Private->ControllerNameTable, + ControllerName + ); +} diff --git a/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.c b/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.c new file mode 100644 index 0000000000..58cc68961e --- /dev/null +++ b/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.c @@ -0,0 +1,1507 @@ +/*++ + +Copyright (c) 2006 - 2007, Intel Corporation +All rights reserved. This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +Module Name: + + UnixSerialIo.c + +Abstract: + + Our DriverBinding member functions operate on the handles + created by the NT Bus driver. + + Handle(1) - UnixIo - DevicePath(1) + + If a serial port is added to the system this driver creates a new handle. + The new handle is required, since the serial device must add an UART device + pathnode. + + Handle(2) - SerialIo - DevicePath(1)\UART + + The driver then adds a gEfiUnixSerialPortGuid as a protocol to Handle(1). + The instance data for this protocol is the private data used to create + Handle(2). + + Handle(1) - UnixIo - DevicePath(1) - UnixSerialPort + + If the driver is unloaded Handle(2) is removed from the system and + gEfiUnixSerialPortGuid is removed from Handle(1). + + Note: Handle(1) is any handle created by the Win NT Bus driver that is passed + into the DriverBinding member functions of this driver. This driver requires + a Handle(1) to contain a UnixIo protocol, a DevicePath protocol, and + the TypeGuid in the UnixIo must be gEfiUnixSerialPortGuid. + + If Handle(1) contains a gEfiUnixSerialPortGuid protocol then the driver is + loaded on the device. + +--*/ + +#include "UnixSerialIo.h" +#include + +EFI_DRIVER_BINDING_PROTOCOL gUnixSerialIoDriverBinding = { + UnixSerialIoDriverBindingSupported, + UnixSerialIoDriverBindingStart, + UnixSerialIoDriverBindingStop, + 0xa, + NULL, + NULL +}; + +STATIC +VOID +PrintSerialParameter( + UNIX_SERIAL_IO_PRIVATE_DATA *Private + ) +{ + struct termios Options; + + if (Private->UnixThunk->Tcgetattr (Private->UnixHandle, &Options) == 0) { + DEBUG ((EFI_D_INFO, "Serial[0x%x]:Input mode: 0x%x\r\n", Private->UnixHandle, Options.c_iflag)); + DEBUG ((EFI_D_INFO, "Serial[0x%x]:Output mode: 0x%x\r\n", Private->UnixHandle, Options.c_oflag)); + DEBUG ((EFI_D_INFO, "Serial[0x%x]:Control flag: 0x%x\r\n", Private->UnixHandle, Options.c_cflag)); + DEBUG ((EFI_D_INFO, "Serial[0x%x]:Local mode flag: 0x%x\r\n", Private->UnixHandle, Options.c_lflag)); + DEBUG ((EFI_D_INFO, "Serial[0x%x]:Line discipline: 0x%x\r\n", Private->UnixHandle, Options.c_line)); + DEBUG ((EFI_D_INFO, "Serial[0x%x]:Input Speed: 0x%x\r\n", Private->UnixHandle, Options.c_ispeed)); + DEBUG ((EFI_D_INFO, "Serial[0x%x]:Output Speed: 0x%x\r\n", Private->UnixHandle, Options.c_ospeed)); + } +} + +STATIC +UINTN +ConvertBaud2Unix ( + UINT64 BaudRate + ) +{ + switch (BaudRate) { + case 0: + return B0; + case 50: + return B50; + case 75: + return B75; + case 110: + return B110; + case 134: + return B134; + case 150: + return B150; + case 200: + return B200; + case 300: + return B300; + case 600: + return B600; + case 1200: + return B1200; + case 1800: + return B1800; + case 2400: + return B2400; + case 4800: + return B4800; + case 9600: + return B9600; + case 19200: + return B19200; + case 38400: + return B38400; + case 57600: + return B57600; + case 115200: + return B115200; + case 230400: + return B230400; + case 460800: + return B460800; + case 500000: + return B500000; + case 576000: + return B576000; + case 921600: + return B921600; + case 1000000: + return B1000000; + case 1152000: + return B1152000; + case 1500000: + return B1500000; + case 2000000: + return B2000000; + case 2500000: + return B2500000; + case 3000000: + return B3000000; + case 3500000: + return B3500000; + case 4000000: + return B4000000; + case __MAX_BAUD: + default: + DEBUG ((EFI_D_ERROR, "Invalid Baud Rate Parameter!\r\n")); + } + return -1; +} + +STATIC +UINTN +ConvertByteSize2Unix ( + UINT8 DataBit + ) +{ + switch (DataBit) { + case 5: + return CS5; + case 6: + return CS6; + case 7: + return CS7; + case 8: + return CS8; + default: + DEBUG ((EFI_D_ERROR, "Invalid Data Size Parameter!\r\n")); + } + return -1; +} + +STATIC +VOID +ConvertParity2Unix ( + struct termios *Options, + EFI_PARITY_TYPE Parity + ) +{ + switch (Parity) { + case NoParity: + Options->c_cflag &= ~PARENB; + break; + case EvenParity: + Options->c_cflag |= PARENB; + break; + case OddParity: + Options->c_cflag |= PARENB; + Options->c_cflag |= PARODD; + break; + case MarkParity: + Options->c_cflag = PARENB | CMSPAR | PARODD; + break; + case SpaceParity: + Options->c_cflag |= PARENB | CMSPAR; + Options->c_cflag &= ~PARODD; + break; + default: + DEBUG ((EFI_D_ERROR, "Invalid Parity Parameter!\r\n")); + } +} + +STATIC +VOID +ConvertStopBit2Unix ( + struct termios *Options, + EFI_STOP_BITS_TYPE StopBits + ) +{ + switch (StopBits) { + case TwoStopBits: + Options->c_cflag |= CSTOPB; + break; + case OneStopBit: + case OneFiveStopBits: + case DefaultStopBits: + Options->c_cflag &= ~CSTOPB; + } +} + +EFI_STATUS +EFIAPI +UnixSerialIoDriverBindingSupported ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Handle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ) +/*++ + +Routine Description: + The implementation of EFI_DRIVER_BINDING_PROTOCOL.EFI_DRIVER_BINDING_SUPPORTED. + +Arguments: + +Returns: + + None + +--*/ +{ + EFI_STATUS Status; + EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; + EFI_UNIX_IO_PROTOCOL *UnixIo; + UART_DEVICE_PATH *UartNode; + + // + // Open the IO Abstraction(s) needed to perform the supported test + // + Status = gBS->OpenProtocol ( + Handle, + &gEfiDevicePathProtocolGuid, + (VOID**)&ParentDevicePath, + This->DriverBindingHandle, + Handle, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (Status == EFI_ALREADY_STARTED) { + return EFI_SUCCESS; + } + + if (EFI_ERROR (Status)) { + return Status; + } + + gBS->CloseProtocol ( + Handle, + &gEfiDevicePathProtocolGuid, + This->DriverBindingHandle, + Handle + ); + + Status = gBS->OpenProtocol ( + Handle, + &gEfiUnixIoProtocolGuid, + (VOID**)&UnixIo, + This->DriverBindingHandle, + Handle, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (Status == EFI_ALREADY_STARTED) { + return EFI_SUCCESS; + } + + if (EFI_ERROR (Status)) { + return Status; + } + + // + // Make sure that the Unix Thunk Protocol is valid + // + if (UnixIo->UnixThunk->Signature != EFI_UNIX_THUNK_PROTOCOL_SIGNATURE) { + Status = EFI_UNSUPPORTED; + goto Error; + } + + // + // Check the GUID to see if this is a handle type the driver supports + // + if (!CompareGuid (UnixIo->TypeGuid, &gEfiUnixSerialPortGuid)) { + Status = EFI_UNSUPPORTED; + goto Error; + } + + if (RemainingDevicePath != NULL) { + Status = EFI_UNSUPPORTED; + UartNode = (UART_DEVICE_PATH *) RemainingDevicePath; + if (UartNode->Header.Type != MESSAGING_DEVICE_PATH || + UartNode->Header.SubType != MSG_UART_DP || + DevicePathNodeLength((EFI_DEVICE_PATH_PROTOCOL *)UartNode) != sizeof(UART_DEVICE_PATH)) { + goto Error; + } + if (UartNode->BaudRate < 0 || UartNode->BaudRate > SERIAL_PORT_MAX_BAUD_RATE) { + goto Error; + } + if (UartNode->Parity < NoParity || UartNode->Parity > SpaceParity) { + goto Error; + } + if (UartNode->DataBits < 5 || UartNode->DataBits > 8) { + goto Error; + } + if (UartNode->StopBits < OneStopBit || UartNode->StopBits > TwoStopBits) { + goto Error; + } + if ((UartNode->DataBits == 5) && (UartNode->StopBits == TwoStopBits)) { + goto Error; + } + if ((UartNode->DataBits >= 6) && (UartNode->DataBits <= 8) && (UartNode->StopBits == OneFiveStopBits)) { + goto Error; + } + Status = EFI_SUCCESS; + } + +Error: + // + // Close the I/O Abstraction(s) used to perform the supported test + // + gBS->CloseProtocol ( + Handle, + &gEfiUnixIoProtocolGuid, + This->DriverBindingHandle, + Handle + ); + + return Status; +} + +EFI_STATUS +EFIAPI +UnixSerialIoDriverBindingStart ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Handle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ) +/*++ + +Routine Description: + +Arguments: + +Returns: + + None + +--*/ +{ + EFI_STATUS Status; + EFI_UNIX_IO_PROTOCOL *UnixIo; + UNIX_SERIAL_IO_PRIVATE_DATA *Private; + UINTN UnixHandle; + UART_DEVICE_PATH Node; + EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; + EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer; + UINTN EntryCount; + UINTN Index; + EFI_SERIAL_IO_PROTOCOL *SerialIo; + CHAR8 AsciiDevName[1024]; + + DEBUG ((EFI_D_INFO, "SerialIo drive binding start!\r\n")); + Private = NULL; + UnixHandle = -1; + + // + // Grab the protocols we need + // + Status = gBS->OpenProtocol ( + Handle, + &gEfiDevicePathProtocolGuid, + (VOID**)&ParentDevicePath, + This->DriverBindingHandle, + Handle, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) { + return Status; + } + + // + // Grab the IO abstraction we need to get any work done + // + Status = gBS->OpenProtocol ( + Handle, + &gEfiUnixIoProtocolGuid, + (VOID**)&UnixIo, + This->DriverBindingHandle, + Handle, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) { + gBS->CloseProtocol ( + Handle, + &gEfiDevicePathProtocolGuid, + This->DriverBindingHandle, + Handle + ); + return Status; + } + + if (Status == EFI_ALREADY_STARTED) { + + if (RemainingDevicePath == NULL) { + return EFI_SUCCESS; + } + + // + // Make sure a child handle does not already exist. This driver can only + // produce one child per serial port. + // + Status = gBS->OpenProtocolInformation ( + Handle, + &gEfiUnixIoProtocolGuid, + &OpenInfoBuffer, + &EntryCount + ); + if (EFI_ERROR (Status)) { + return Status; + } + + Status = EFI_ALREADY_STARTED; + for (Index = 0; Index < EntryCount; Index++) { + if (OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) { + Status = gBS->OpenProtocol ( + OpenInfoBuffer[Index].ControllerHandle, + &gEfiSerialIoProtocolGuid, + (VOID**)&SerialIo, + This->DriverBindingHandle, + Handle, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (!EFI_ERROR (Status)) { + CopyMem (&Node, RemainingDevicePath, sizeof (UART_DEVICE_PATH)); + Status = SerialIo->SetAttributes ( + SerialIo, + Node.BaudRate, + SerialIo->Mode->ReceiveFifoDepth, + SerialIo->Mode->Timeout, + Node.Parity, + Node.DataBits, + Node.StopBits + ); + } + break; + } + } + + FreePool (OpenInfoBuffer); + return Status; + } + + // + // Check to see if we can access the hardware device. If it's Open in Unix we + // will not get access. + // + UnicodeStrToAsciiStr(UnixIo->EnvString, AsciiDevName); + UnixHandle = UnixIo->UnixThunk->Open (AsciiDevName, O_RDWR | O_NOCTTY, 0); + + if (UnixHandle == -1) { + DEBUG ((EFI_D_INFO, "Faile to open serial device, %s!\r\n", UnixIo->EnvString )); + UnixIo->UnixThunk->Perror (AsciiDevName); + Status = EFI_DEVICE_ERROR; + goto Error; + } + DEBUG ((EFI_D_INFO, "Success to open serial device %s, Hanle = 0x%x \r\n", UnixIo->EnvString, UnixHandle)); + + // + // Construct Private data + // + Private = AllocatePool (sizeof (UNIX_SERIAL_IO_PRIVATE_DATA)); + if (Private == NULL) { + goto Error; + } + + // + // This signature must be valid before any member function is called + // + Private->Signature = UNIX_SERIAL_IO_PRIVATE_DATA_SIGNATURE; + Private->UnixHandle = UnixHandle; + Private->ControllerHandle = Handle; + Private->Handle = NULL; + Private->UnixThunk = UnixIo->UnixThunk; + Private->ParentDevicePath = ParentDevicePath; + Private->ControllerNameTable = NULL; + + Private->SoftwareLoopbackEnable = FALSE; + Private->HardwareLoopbackEnable = FALSE; + Private->HardwareFlowControl = FALSE; + Private->Fifo.First = 0; + Private->Fifo.Last = 0; + Private->Fifo.Surplus = SERIAL_MAX_BUFFER_SIZE; + + AddUnicodeString ( + "eng", + gUnixSerialIoComponentName.SupportedLanguages, + &Private->ControllerNameTable, + UnixIo->EnvString + ); + + Private->SerialIo.Revision = SERIAL_IO_INTERFACE_REVISION; + Private->SerialIo.Reset = UnixSerialIoReset; + Private->SerialIo.SetAttributes = UnixSerialIoSetAttributes; + Private->SerialIo.SetControl = UnixSerialIoSetControl; + Private->SerialIo.GetControl = UnixSerialIoGetControl; + Private->SerialIo.Write = UnixSerialIoWrite; + Private->SerialIo.Read = UnixSerialIoRead; + Private->SerialIo.Mode = &Private->SerialIoMode; + + if (RemainingDevicePath != NULL) { + // + // Match the configuration of the RemainingDevicePath. IsHandleSupported() + // already checked to make sure the RemainingDevicePath contains settings + // that we can support. + // + CopyMem (&Private->UartDevicePath, RemainingDevicePath, sizeof (UART_DEVICE_PATH)); + } else { + // + // Build the device path by appending the UART node to the ParentDevicePath + // from the UnixIo handle. The Uart setings are zero here, since + // SetAttribute() will update them to match the default setings. + // + ZeroMem (&Private->UartDevicePath, sizeof (UART_DEVICE_PATH)); + Private->UartDevicePath.Header.Type = MESSAGING_DEVICE_PATH; + Private->UartDevicePath.Header.SubType = MSG_UART_DP; + SetDevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath, sizeof (UART_DEVICE_PATH)); + } + + // + // Build the device path by appending the UART node to the ParentDevicePath + // from the UnixIo handle. The Uart setings are zero here, since + // SetAttribute() will update them to match the current setings. + // + Private->DevicePath = AppendDevicePathNode ( + ParentDevicePath, + (EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath + ); + if (Private->DevicePath == NULL) { + Status = EFI_OUT_OF_RESOURCES; + goto Error; + } + + // + // Fill in Serial I/O Mode structure based on either the RemainingDevicePath or defaults. + // + Private->SerialIoMode.ControlMask = SERIAL_CONTROL_MASK; + Private->SerialIoMode.Timeout = SERIAL_TIMEOUT_DEFAULT; + Private->SerialIoMode.BaudRate = Private->UartDevicePath.BaudRate; + Private->SerialIoMode.ReceiveFifoDepth = SERIAL_FIFO_DEFAULT; + Private->SerialIoMode.DataBits = Private->UartDevicePath.DataBits; + Private->SerialIoMode.Parity = Private->UartDevicePath.Parity; + Private->SerialIoMode.StopBits = Private->UartDevicePath.StopBits; + + // + // Issue a reset to initialize the COM port + // + Status = Private->SerialIo.Reset (&Private->SerialIo); + if (EFI_ERROR (Status)) { + goto Error; + } + + // + // Create new child handle + // + Status = gBS->InstallMultipleProtocolInterfaces ( + &Private->Handle, + &gEfiSerialIoProtocolGuid, + &Private->SerialIo, + &gEfiDevicePathProtocolGuid, + Private->DevicePath, + NULL + ); + if (EFI_ERROR (Status)) { + goto Error; + } + + // + // Open For Child Device + // + Status = gBS->OpenProtocol ( + Handle, + &gEfiUnixIoProtocolGuid, + (VOID**)&UnixIo, + This->DriverBindingHandle, + Private->Handle, + EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER + ); + if (EFI_ERROR (Status)) { + goto Error; + } + + return EFI_SUCCESS; + +Error: + // + // Use the Stop() function to free all resources allocated in Start() + // + if (Private != NULL) { + if (Private->Handle != NULL) { + This->Stop (This, Handle, 1, &Private->Handle); + } else { + if (UnixHandle != -1) { + Private->UnixThunk->Close (UnixHandle); + } + + if (Private->DevicePath != NULL) { + FreePool (Private->DevicePath); + } + + FreeUnicodeStringTable (Private->ControllerNameTable); + + FreePool (Private); + } + } + + This->Stop (This, Handle, 0, NULL); + + return Status; +} + +EFI_STATUS +EFIAPI +UnixSerialIoDriverBindingStop ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Handle, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + Handle - TODO: add argument description + NumberOfChildren - TODO: add argument description + ChildHandleBuffer - TODO: add argument description + +Returns: + + EFI_DEVICE_ERROR - TODO: Add description for return value + EFI_SUCCESS - TODO: Add description for return value + +--*/ +{ + EFI_STATUS Status; + UINTN Index; + BOOLEAN AllChildrenStopped; + EFI_SERIAL_IO_PROTOCOL *SerialIo; + UNIX_SERIAL_IO_PRIVATE_DATA *Private; + EFI_UNIX_IO_PROTOCOL *UnixIo; + + // + // Complete all outstanding transactions to Controller. + // Don't allow any new transaction to Controller to be started. + // + + if (NumberOfChildren == 0) { + // + // Close the bus driver + // + Status = gBS->CloseProtocol ( + Handle, + &gEfiUnixIoProtocolGuid, + This->DriverBindingHandle, + Handle + ); + Status = gBS->CloseProtocol ( + Handle, + &gEfiDevicePathProtocolGuid, + This->DriverBindingHandle, + Handle + ); + return Status; + } + + AllChildrenStopped = TRUE; + + for (Index = 0; Index < NumberOfChildren; Index++) { + Status = gBS->OpenProtocol ( + ChildHandleBuffer[Index], + &gEfiSerialIoProtocolGuid, + (VOID**)&SerialIo, + This->DriverBindingHandle, + Handle, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (!EFI_ERROR (Status)) { + Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (SerialIo); + + ASSERT (Private->Handle == ChildHandleBuffer[Index]); + + Status = gBS->CloseProtocol ( + Handle, + &gEfiUnixIoProtocolGuid, + This->DriverBindingHandle, + ChildHandleBuffer[Index] + ); + + Status = gBS->UninstallMultipleProtocolInterfaces ( + ChildHandleBuffer[Index], + &gEfiSerialIoProtocolGuid, + &Private->SerialIo, + &gEfiDevicePathProtocolGuid, + Private->DevicePath, + NULL + ); + + if (EFI_ERROR (Status)) { + gBS->OpenProtocol ( + Handle, + &gEfiUnixIoProtocolGuid, + (VOID **) &UnixIo, + This->DriverBindingHandle, + ChildHandleBuffer[Index], + EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER + ); + } else { + Private->UnixThunk->Close (Private->UnixHandle); + + FreePool (Private->DevicePath); + + FreeUnicodeStringTable (Private->ControllerNameTable); + + FreePool (Private); + } + } + + if (EFI_ERROR (Status)) { + AllChildrenStopped = FALSE; + } + } + + if (!AllChildrenStopped) { + return EFI_DEVICE_ERROR; + } + + return EFI_SUCCESS; +} + +// +// Serial IO Protocol member functions +// + +EFI_STATUS +EFIAPI +UnixSerialIoReset ( + IN EFI_SERIAL_IO_PROTOCOL *This + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +{ + UNIX_SERIAL_IO_PRIVATE_DATA *Private; + EFI_TPL Tpl; + UINTN UnixStatus; + + Tpl = gBS->RaiseTPL (EFI_TPL_NOTIFY); + + Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); + + UnixStatus = Private->UnixThunk->Tcflush ( + Private->UnixHandle, + TCIOFLUSH + ); + switch (UnixStatus) { + case EBADF: + DEBUG ((EFI_D_ERROR, "Invalid handle of serial device!\r\n")); + return EFI_DEVICE_ERROR; + case EINVAL: + DEBUG ((EFI_D_ERROR, "Invalid queue selector!\r\n")); + return EFI_DEVICE_ERROR; + case ENOTTY: + DEBUG ((EFI_D_ERROR, "The file associated with serial's handle is not a terminal!\r\n")); + return EFI_DEVICE_ERROR; + default: + DEBUG ((EFI_D_ERROR, "The serial IO device is reset successfully!\r\n")); + } + + gBS->RestoreTPL (Tpl); + + return This->SetAttributes ( + This, + This->Mode->BaudRate, + This->Mode->ReceiveFifoDepth, + This->Mode->Timeout, + This->Mode->Parity, + (UINT8) This->Mode->DataBits, + This->Mode->StopBits + ); +} + +EFI_STATUS +EFIAPI +UnixSerialIoSetAttributes ( + IN EFI_SERIAL_IO_PROTOCOL *This, + IN UINT64 BaudRate, + IN UINT32 ReceiveFifoDepth, + IN UINT32 Timeout, + IN EFI_PARITY_TYPE Parity, + IN UINT8 DataBits, + IN EFI_STOP_BITS_TYPE StopBits + ) +/*++ + +Routine Description: + + This function is used to set the attributes. + +Arguments: + + This - A pointer to the EFI_SERIAL_IO_PROTOCOL structrue. + BaudRate - The Baud rate of the serial device. + ReceiveFifoDepth - The request depth of fifo on receive side. + Timeout - the request timeout for a single charact. + Parity - The type of parity used in serial device. + DataBits - Number of deata bits used in serial device. + StopBits - Number of stop bits used in serial device. + +Returns: + Status code + + None + +--*/ +{ + EFI_STATUS Status; + UNIX_SERIAL_IO_PRIVATE_DATA *Private; + EFI_TPL Tpl; + EFI_DEVICE_PATH_PROTOCOL *NewDevicePath; + + Tpl = gBS->RaiseTPL (EFI_TPL_NOTIFY); + Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); + + // + // Some of our arguments have defaults if a null value is passed in, and + // we must set the default values if a null argument is passed in. + // + if (BaudRate == 0) { + BaudRate = SERIAL_BAUD_DEFAULT; + } + + if (ReceiveFifoDepth == 0) { + ReceiveFifoDepth = SERIAL_FIFO_DEFAULT; + } + + if (Timeout == 0) { + Timeout = SERIAL_TIMEOUT_DEFAULT; + } + + if (Parity == DefaultParity) { + Parity = NoParity; + } + + if (DataBits == 0) { + DataBits = SERIAL_DATABITS_DEFAULT; + } + + if (StopBits == DefaultStopBits) { + StopBits = OneStopBit; + } + + // + // See if the new attributes already match the current attributes + // + if (Private->UartDevicePath.BaudRate == BaudRate && + Private->UartDevicePath.DataBits == DataBits && + Private->UartDevicePath.Parity == Parity && + Private->UartDevicePath.StopBits == StopBits && + Private->SerialIoMode.ReceiveFifoDepth == ReceiveFifoDepth && + Private->SerialIoMode.Timeout == Timeout ) { + gBS->RestoreTPL(Tpl); + return EFI_SUCCESS; + } + + // + // Try to get options from serial device. + // + if (Private->UnixThunk->Tcgetattr (Private->UnixHandle, &Private->UnixTermios) == -1) { + Private->UnixThunk->Perror ("IoSetAttributes"); + gBS->RestoreTPL (Tpl); + return EFI_DEVICE_ERROR; + } + + // + // Setting Baud Rate + // + Private->UnixThunk->Cfsetispeed (&Private->UnixTermios, ConvertBaud2Unix(BaudRate)); + Private->UnixThunk->Cfsetospeed (&Private->UnixTermios, ConvertBaud2Unix(BaudRate)); + // + // Setting DataBits + // + Private->UnixTermios.c_cflag &= ~CSIZE; + Private->UnixTermios.c_cflag |= ConvertByteSize2Unix (DataBits); + // + // Setting Parity + // + ConvertParity2Unix (&Private->UnixTermios, Parity); + // + // Setting StopBits + // + ConvertStopBit2Unix (&Private->UnixTermios, StopBits); + // + // Raw input + // + Private->UnixTermios.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); + // + // Raw output + // + Private->UnixTermios.c_oflag &= ~OPOST; + // + // Support hardware flow control + // + Private->UnixTermios.c_cflag &= ~CRTSCTS;; + // + // Time out + // + Private->UnixTermios.c_cc[VMIN] = 0; + Private->UnixTermios.c_cc[VTIME] = (Timeout/1000000) * 10; + + // + // Set the options + // + if (-1 == Private->UnixThunk->Tcsetattr ( + Private->UnixHandle, + TCSANOW, + &Private->UnixTermios + )) { + DEBUG ((EFI_D_INFO, "Fail to set options for serial device!\r\n")); + return EFI_DEVICE_ERROR; + } + + // + // Update mode + // + Private->SerialIoMode.BaudRate = BaudRate; + Private->SerialIoMode.ReceiveFifoDepth = ReceiveFifoDepth; + Private->SerialIoMode.Timeout = Timeout; + Private->SerialIoMode.Parity = Parity; + Private->SerialIoMode.DataBits = DataBits; + Private->SerialIoMode.StopBits = StopBits; + // + // See if Device Path Node has actually changed + // + if (Private->UartDevicePath.BaudRate == BaudRate && + Private->UartDevicePath.DataBits == DataBits && + Private->UartDevicePath.Parity == Parity && + Private->UartDevicePath.StopBits == StopBits ) { + gBS->RestoreTPL(Tpl); + return EFI_SUCCESS; + } + + // + // Update the device path + // + Private->UartDevicePath.BaudRate = BaudRate; + Private->UartDevicePath.DataBits = DataBits; + Private->UartDevicePath.Parity = (UINT8) Parity; + Private->UartDevicePath.StopBits = (UINT8) StopBits; + + NewDevicePath = AppendDevicePathNode ( + Private->ParentDevicePath, + (EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath + ); + if (NewDevicePath == NULL) { + gBS->RestoreTPL (Tpl); + return EFI_DEVICE_ERROR; + } + + if (Private->Handle != NULL) { + Status = gBS->ReinstallProtocolInterface ( + Private->Handle, + &gEfiDevicePathProtocolGuid, + Private->DevicePath, + NewDevicePath + ); + if (EFI_ERROR (Status)) { + gBS->RestoreTPL (Tpl); + return Status; + } + } + + if (Private->DevicePath != NULL) { + FreePool (Private->DevicePath); + } + + Private->DevicePath = NewDevicePath; + + gBS->RestoreTPL (Tpl); + + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +UnixSerialIoSetControl ( + IN EFI_SERIAL_IO_PROTOCOL *This, + IN UINT32 Control + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + Control - TODO: add argument description + +Returns: + + EFI_DEVICE_ERROR - TODO: Add description for return value + EFI_DEVICE_ERROR - TODO: Add description for return value + EFI_SUCCESS - TODO: Add description for return value + +--*/ +{ + UNIX_SERIAL_IO_PRIVATE_DATA *Private; + UINTN Result; + UINTN Status; + struct termios Options; + EFI_TPL Tpl; + + Tpl = gBS->RaiseTPL (EFI_TPL_NOTIFY); + + Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); + + Result = Private->UnixThunk->IoCtl (Private->UnixHandle, TIOCMGET, &Status); + + if (Result == -1) { + Private->UnixThunk->Perror ("SerialSetControl"); + gBS->RestoreTPL (Tpl); + return EFI_DEVICE_ERROR; + } + + Private->HardwareFlowControl = FALSE; + Private->SoftwareLoopbackEnable = FALSE; + Private->HardwareLoopbackEnable = FALSE; + + if (Control & EFI_SERIAL_REQUEST_TO_SEND) { + Options.c_cflag |= TIOCM_RTS; + } + + if (Control & EFI_SERIAL_DATA_TERMINAL_READY) { + Options.c_cflag |= TIOCM_DTR; + } + + if (Control & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) { + Private->HardwareFlowControl = TRUE; + } + + if (Control & EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE) { + Private->SoftwareLoopbackEnable = TRUE; + } + + if (Control & EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) { + Private->HardwareLoopbackEnable = TRUE; + } + + Result = Private->UnixThunk->IoCtl (Private->UnixHandle, TIOCMSET, &Status); + + if (Result == -1) { + Private->UnixThunk->Perror ("SerialSetControl"); + gBS->RestoreTPL (Tpl); + return EFI_DEVICE_ERROR; + } + + gBS->RestoreTPL (Tpl); + + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +UnixSerialIoGetControl ( + IN EFI_SERIAL_IO_PROTOCOL *This, + OUT UINT32 *Control + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + Control - TODO: add argument description + +Returns: + + EFI_DEVICE_ERROR - TODO: Add description for return value + EFI_DEVICE_ERROR - TODO: Add description for return value + EFI_DEVICE_ERROR - TODO: Add description for return value + EFI_SUCCESS - TODO: Add description for return value + +--*/ +{ + UNIX_SERIAL_IO_PRIVATE_DATA *Private; + UINTN Result; + UINTN Status; + struct termios Options; + UINT32 Bits; + EFI_TPL Tpl; + UINTN Bytes; + + Tpl = gBS->RaiseTPL (EFI_TPL_NOTIFY); + + Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); + Result = Private->UnixThunk->IoCtl (Private->UnixHandle, TIOCMGET, &Status); + if (Result == -1) { + Private->UnixThunk->Perror ("SerialGetControl"); + gBS->RestoreTPL (Tpl); + return EFI_DEVICE_ERROR; + } + + if ((Status & TIOCM_CTS) == TIOCM_CTS) { + Bits |= EFI_SERIAL_CLEAR_TO_SEND; + } + + if ((Status & TIOCM_DSR) == TIOCM_DSR) { + Bits |= EFI_SERIAL_DATA_SET_READY; + } + + if ((Status & TIOCM_DTR) == TIOCM_DTR) { + Bits |= EFI_SERIAL_DATA_TERMINAL_READY; + } + + if ((Status & TIOCM_RTS) == TIOCM_RTS) { + Bits |= EFI_SERIAL_REQUEST_TO_SEND; + } + + if ((Status & TIOCM_RNG) == TIOCM_RNG) { + Bits |= EFI_SERIAL_RING_INDICATE; + } + + if ((Status & TIOCM_CAR) == TIOCM_CAR) { + Bits |= EFI_SERIAL_CARRIER_DETECT; + } + + if (Private->HardwareFlowControl) { + Bits |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE; + } + + if (Private->SoftwareLoopbackEnable) { + Bits |= EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE; + } + + if (Private->HardwareLoopbackEnable) { + Bits |= EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE; + } + + Result = Private->UnixThunk->IoCtl (Private->UnixHandle, FIONREAD, &Bytes); + if (Result == -1) { + Private->UnixThunk->Perror ("SerialGetControl"); + gBS->RestoreTPL (Tpl); + return EFI_DEVICE_ERROR; + } + + if (Bytes == 0) { + Bits |= EFI_SERIAL_INPUT_BUFFER_EMPTY; + } + + *Control = Bits; + + gBS->RestoreTPL (Tpl); + + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +UnixSerialIoWrite ( + IN EFI_SERIAL_IO_PROTOCOL *This, + IN OUT UINTN *BufferSize, + IN VOID *Buffer + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + BufferSize - TODO: add argument description + Buffer - TODO: add argument description + +Returns: + + EFI_DEVICE_ERROR - TODO: Add description for return value + EFI_SUCCESS - TODO: Add description for return value + +--*/ +{ + UNIX_SERIAL_IO_PRIVATE_DATA *Private; + UINT8 *ByteBuffer; + UINT32 TotalBytesWritten; + UINT32 BytesToGo; + UINT32 BytesWritten; + UINT32 Index; + UINT32 Control; + EFI_TPL Tpl; + + Tpl = gBS->RaiseTPL (EFI_TPL_NOTIFY); + + Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); + + ByteBuffer = (UINT8 *) Buffer; + TotalBytesWritten = 0; + + if (Private->SoftwareLoopbackEnable || Private->HardwareLoopbackEnable) { + for (Index = 0; Index < *BufferSize; Index++) { + if (IsaSerialFifoAdd (&Private->Fifo, ByteBuffer[Index]) == EFI_SUCCESS) { + TotalBytesWritten++; + } else { + break; + } + } + } else { + BytesToGo = (*BufferSize); + + do { + if (Private->HardwareFlowControl) { + // + // Send RTS + // + UnixSerialIoGetControl (&Private->SerialIo, &Control); + Control |= EFI_SERIAL_REQUEST_TO_SEND; + UnixSerialIoSetControl (&Private->SerialIo, Control); + } + + // + // Do the write + // + BytesWritten = Private->UnixThunk->Write ( + Private->UnixHandle, + &ByteBuffer[TotalBytesWritten], + BytesToGo + ); + + if (Private->HardwareFlowControl) { + // + // Assert RTS + // + UnixSerialIoGetControl (&Private->SerialIo, &Control); + Control &= ~ (UINT32) EFI_SERIAL_REQUEST_TO_SEND; + UnixSerialIoSetControl (&Private->SerialIo, Control); + } + + TotalBytesWritten += BytesWritten; + BytesToGo -= BytesWritten; + } while (BytesToGo > 0); + } + + *BufferSize = TotalBytesWritten; + + gBS->RestoreTPL (Tpl); + + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +UnixSerialIoRead ( + IN EFI_SERIAL_IO_PROTOCOL *This, + IN OUT UINTN *BufferSize, + OUT VOID *Buffer + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + BufferSize - TODO: add argument description + Buffer - TODO: add argument description + +Returns: + + EFI_DEVICE_ERROR - TODO: Add description for return value + +--*/ +{ + UNIX_SERIAL_IO_PRIVATE_DATA *Private; + UINT32 BytesRead; + EFI_STATUS Status; + UINT32 Index; + UINT8 Data; + UINT32 Control; + EFI_TPL Tpl; + + Tpl = gBS->RaiseTPL (EFI_TPL_NOTIFY); + + Private = UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS (This); + + // + // Do the read + // + if (Private->SoftwareLoopbackEnable || Private->HardwareLoopbackEnable) { + for (Index = 0, BytesRead = 0; Index < *BufferSize; Index++) { + if (IsaSerialFifoRemove (&Private->Fifo, &Data) == EFI_SUCCESS) { + ((UINT8 *) Buffer)[Index] = Data; + BytesRead++; + } else { + break; + } + } + } else { + if (Private->HardwareFlowControl) { + UnixSerialIoGetControl (&Private->SerialIo, &Control); + Control |= EFI_SERIAL_DATA_TERMINAL_READY; + UnixSerialIoSetControl (&Private->SerialIo, Control); + } + + BytesRead = Private->UnixThunk->Read (Private->UnixHandle, Buffer, *BufferSize); + if (Private->HardwareFlowControl) { + UnixSerialIoGetControl (&Private->SerialIo, &Control); + Control &= ~ (UINT32) EFI_SERIAL_DATA_TERMINAL_READY; + UnixSerialIoSetControl (&Private->SerialIo, Control); + } + + } + + if (BytesRead != *BufferSize) { + Status = EFI_TIMEOUT; + } else { + Status = EFI_SUCCESS; + } + + *BufferSize = (UINTN) BytesRead; + + gBS->RestoreTPL (Tpl); + + return Status; +} + +BOOLEAN +IsaSerialFifoFull ( + IN SERIAL_DEV_FIFO *Fifo + ) +/*++ + + Routine Description: + Detect whether specific FIFO is full or not + + Arguments: + Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO + + Returns: + TRUE: the FIFO is full + FALSE: the FIFO is not full + +--*/ +{ + if (Fifo->Surplus == 0) { + return TRUE; + } + + return FALSE; +} + +BOOLEAN +IsaSerialFifoEmpty ( + IN SERIAL_DEV_FIFO *Fifo + ) +/*++ + + Routine Description: + Detect whether specific FIFO is empty or not + + Arguments: + Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO + + Returns: + TRUE: the FIFO is empty + FALSE: the FIFO is not empty + +--*/ +{ + if (Fifo->Surplus == SERIAL_MAX_BUFFER_SIZE) { + return TRUE; + } + + return FALSE; +} + +EFI_STATUS +IsaSerialFifoAdd ( + IN SERIAL_DEV_FIFO *Fifo, + IN UINT8 Data + ) +/*++ + + Routine Description: + Add data to specific FIFO + + Arguments: + Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO + Data UINT8: the data added to FIFO + + Returns: + EFI_SUCCESS: Add data to specific FIFO successfully + EFI_OUT_RESOURCE: Failed to add data because FIFO is already full + +--*/ +// TODO: EFI_OUT_OF_RESOURCES - add return value to function comment +{ + // + // if FIFO full can not add data + // + if (IsaSerialFifoFull (Fifo)) { + return EFI_OUT_OF_RESOURCES; + } + + // + // FIFO is not full can add data + // + Fifo->Data[Fifo->Last] = Data; + Fifo->Surplus--; + Fifo->Last++; + if (Fifo->Last >= SERIAL_MAX_BUFFER_SIZE) { + Fifo->Last = 0; + } + + return EFI_SUCCESS; +} + +EFI_STATUS +IsaSerialFifoRemove ( + IN SERIAL_DEV_FIFO *Fifo, + OUT UINT8 *Data + ) +/*++ + + Routine Description: + Remove data from specific FIFO + + Arguments: + Fifo SERIAL_DEV_FIFO *: A pointer to the Data Structure SERIAL_DEV_FIFO + Data UINT8*: the data removed from FIFO + + Returns: + EFI_SUCCESS: Remove data from specific FIFO successfully + EFI_OUT_RESOURCE: Failed to remove data because FIFO is empty + +--*/ +// TODO: EFI_OUT_OF_RESOURCES - add return value to function comment +{ + // + // if FIFO is empty, no data can remove + // + if (IsaSerialFifoEmpty (Fifo)) { + return EFI_OUT_OF_RESOURCES; + } + + // + // FIFO is not empty, can remove data + // + *Data = Fifo->Data[Fifo->First]; + Fifo->Surplus++; + Fifo->First++; + if (Fifo->First >= SERIAL_MAX_BUFFER_SIZE) { + Fifo->First = 0; + } + + return EFI_SUCCESS; +} diff --git a/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.h b/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.h new file mode 100644 index 0000000000..30109e2529 --- /dev/null +++ b/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.h @@ -0,0 +1,507 @@ +/*++ + +Copyright (c) 2006, Intel Corporation +All rights reserved. This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +Module Name: + + UnixSerialIo.h + +Abstract: + + +--*/ + +#ifndef _UNIXPKG_SERIAL_IO_ +#define _UNIXPKG_SERIAL_IO_ +#include +#include +#include +#include +#include +#include +#include + +#define SERIAL_MAX_BUFFER_SIZE 256 +#define TIMEOUT_STALL_INTERVAL 10 + +typedef struct { + UINT32 First; + UINT32 Last; + UINT32 Surplus; + UINT8 Data[SERIAL_MAX_BUFFER_SIZE]; +} SERIAL_DEV_FIFO; + +#define UNIX_SERIAL_IO_PRIVATE_DATA_SIGNATURE EFI_SIGNATURE_32 ('U', 'N', 's', 'i') +typedef struct { + UINT64 Signature; + + // + // Protocol data for the new handle we are going to add + // + EFI_HANDLE Handle; + EFI_SERIAL_IO_PROTOCOL SerialIo; + EFI_SERIAL_IO_MODE SerialIoMode; + EFI_DEVICE_PATH_PROTOCOL *DevicePath; + + // + // Private Data + // + EFI_HANDLE ControllerHandle; + EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; + UART_DEVICE_PATH UartDevicePath; + EFI_UNIX_THUNK_PROTOCOL *UnixThunk; + + EFI_UNICODE_STRING_TABLE *ControllerNameTable; + + // + // Private NT type Data; + // + UINTN UnixHandle; + struct termios UnixTermios; + + BOOLEAN SoftwareLoopbackEnable; + BOOLEAN HardwareFlowControl; + BOOLEAN HardwareLoopbackEnable; + + SERIAL_DEV_FIFO Fifo; + +} UNIX_SERIAL_IO_PRIVATE_DATA; + +#define UNIX_SERIAL_IO_PRIVATE_DATA_FROM_THIS(a) \ + CR(a, UNIX_SERIAL_IO_PRIVATE_DATA, SerialIo, UNIX_SERIAL_IO_PRIVATE_DATA_SIGNATURE) + +// +// Global Protocol Variables +// +extern EFI_DRIVER_BINDING_PROTOCOL gUnixSerialIoDriverBinding; +extern EFI_COMPONENT_NAME_PROTOCOL gUnixSerialIoComponentName; + +// +// Macros to convert EFI serial types to NT serial types. +// + +// +// one second +// +#define SERIAL_TIMEOUT_DEFAULT (1000 * 1000) +#define SERIAL_BAUD_DEFAULT 115200 +#define SERIAL_FIFO_DEFAULT 14 +#define SERIAL_DATABITS_DEFAULT 8 +#define SERIAL_PARITY_DEFAULT DefaultParity +#define SERIAL_STOPBITS_DEFAULT DefaultStopBits + +#define SERIAL_CONTROL_MASK (EFI_SERIAL_CLEAR_TO_SEND | \ + EFI_SERIAL_DATA_SET_READY | \ + EFI_SERIAL_RING_INDICATE | \ + EFI_SERIAL_CARRIER_DETECT | \ + EFI_SERIAL_REQUEST_TO_SEND | \ + EFI_SERIAL_DATA_TERMINAL_READY | \ + EFI_SERIAL_INPUT_BUFFER_EMPTY) + +#define ConvertBaud2Nt(x) (DWORD) x +#define ConvertData2Nt(x) (BYTE) x + +#define ConvertParity2Nt(x) \ + (BYTE) ( \ + x == DefaultParity ? NOPARITY : \ + x == NoParity ? NOPARITY : \ + x == EvenParity ? EVENPARITY : \ + x == OddParity ? ODDPARITY : \ + x == MarkParity ? MARKPARITY : \ + x == SpaceParity ? SPACEPARITY : 0 \ + ) + +#define ConvertStop2Nt(x) \ + (BYTE) ( \ + x == DefaultParity ? ONESTOPBIT : \ + x == OneFiveStopBits ? ONE5STOPBITS : \ + x == TwoStopBits ? TWOSTOPBITS : 0 \ + ) + +#define ConvertTime2Nt(x) ((x) / 1000) + +// +// 115400 baud with rounding errors +// +#define SERIAL_PORT_MAX_BAUD_RATE 115400 + +// +// Function Prototypes +// +EFI_STATUS +EFIAPI +InitializeUnixSerialIo ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + ImageHandle - TODO: add argument description + SystemTable - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +EFIAPI +UnixSerialIoDriverBindingSupported ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Handle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + Handle - TODO: add argument description + RemainingDevicePath - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +EFIAPI +UnixSerialIoDriverBindingStart ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Handle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + Handle - TODO: add argument description + RemainingDevicePath - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +EFIAPI +UnixSerialIoDriverBindingStop ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Handle, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + Handle - TODO: add argument description + NumberOfChildren - TODO: add argument description + ChildHandleBuffer - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +EFIAPI +UnixSerialIoReset ( + IN EFI_SERIAL_IO_PROTOCOL *This + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +EFIAPI +UnixSerialIoSetAttributes ( + IN EFI_SERIAL_IO_PROTOCOL *This, + IN UINT64 BaudRate, + IN UINT32 ReceiveFifoDepth, + IN UINT32 Timeout, + IN EFI_PARITY_TYPE Parity, + IN UINT8 DataBits, + IN EFI_STOP_BITS_TYPE StopBits + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + BaudRate - TODO: add argument description + ReceiveFifoDepth - TODO: add argument description + Timeout - TODO: add argument description + Parity - TODO: add argument description + DataBits - TODO: add argument description + StopBits - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +EFIAPI +UnixSerialIoSetControl ( + IN EFI_SERIAL_IO_PROTOCOL *This, + IN UINT32 Control + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + Control - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +EFIAPI +UnixSerialIoGetControl ( + IN EFI_SERIAL_IO_PROTOCOL *This, + OUT UINT32 *Control + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + Control - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +EFIAPI +UnixSerialIoWrite ( + IN EFI_SERIAL_IO_PROTOCOL *This, + IN OUT UINTN *BufferSize, + IN VOID *Buffer + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + BufferSize - TODO: add argument description + Buffer - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +EFIAPI +UnixSerialIoRead ( + IN EFI_SERIAL_IO_PROTOCOL *This, + IN OUT UINTN *BufferSize, + OUT VOID *Buffer + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + This - TODO: add argument description + BufferSize - TODO: add argument description + Buffer - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +BOOLEAN +IsaSerialFifoFull ( + IN SERIAL_DEV_FIFO *Fifo + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + Fifo - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +BOOLEAN +IsaSerialFifoEmpty ( + IN SERIAL_DEV_FIFO *Fifo + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + Fifo - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +IsaSerialFifoAdd ( + IN SERIAL_DEV_FIFO *Fifo, + IN UINT8 Data + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + Fifo - TODO: add argument description + Data - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +IsaSerialFifoRemove ( + IN SERIAL_DEV_FIFO *Fifo, + OUT UINT8 *Data + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + Fifo - TODO: add argument description + Data - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +EFI_STATUS +IsaSerialReceiveTransmit ( + UNIX_SERIAL_IO_PRIVATE_DATA *Private + ) +/*++ + +Routine Description: + + TODO: Add function description + +Arguments: + + Private - TODO: add argument description + +Returns: + + TODO: add return values + +--*/ +; + +#endif diff --git a/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.msa b/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.msa new file mode 100644 index 0000000000..793d24a3f3 --- /dev/null +++ b/EdkUnixPkg/Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.msa @@ -0,0 +1,87 @@ + + + + UnixSerialIo + UEFI_DRIVER + 600F2BF2-63A7-48ca-9FD0-A3450B87EE05 + 1.0 + Serial I/O driver + Our DriverBinding member functions operate on the handles + created by the Unix Bus driver + Copyright (c) 2006 - 2007, Intel Corporation + All rights reserved. This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052 + + + IA32 + false + UnixSerialIo + + + + DebugLib + + + BaseLib + + + UefiDriverModelLib + + + UefiDriverEntryPoint + + + UefiLib + + + BaseMemoryLib + + + UefiBootServicesTableLib + + + DevicePathLib + + + MemoryAllocationLib + + + + UnixSerialIo.h + UnixSerialIo.c + ComponentName.c + + + + + + + + gEfiUnixIoProtocolGuid + + + gEfiDevicePathProtocolGuid + + + gEfiSerialIoProtocolGuid + + + + + gEfiUnixSerialPortGuid + + + + EFI_SPECIFICATION_VERSION 0x00020000 + EDK_RELEASE_VERSION 0x00020000 + + gUnixSerialIoDriverBinding + gUnixSerialIoComponentName + + + \ No newline at end of file diff --git a/EdkUnixPkg/Dxe/UnixThunk/Bus/UnixBusDriver/UnixBusDriver.c b/EdkUnixPkg/Dxe/UnixThunk/Bus/UnixBusDriver/UnixBusDriver.c index efa66abeeb..b8611f66d2 100644 --- a/EdkUnixPkg/Dxe/UnixThunk/Bus/UnixBusDriver/UnixBusDriver.c +++ b/EdkUnixPkg/Dxe/UnixThunk/Bus/UnixBusDriver/UnixBusDriver.c @@ -122,6 +122,7 @@ static UNIX_PCD_ENTRY mPcdEnvironment[] = { {PcdToken(PcdUnixConsole), &gEfiUnixConsoleGuid}, {PcdToken(PcdUnixUga), &gEfiUnixUgaGuid}, {PcdToken(PcdUnixFileSystem), &gEfiUnixFileSystemGuid}, + {PcdToken(PcdUnixSerialPort), &gEfiUnixSerialPortGuid}, {PcdToken(PcdUnixVirtualDisk), &gEfiUnixVirtualDisksGuid}, {PcdToken(PcdUnixPhysicalDisk), &gEfiUnixPhysicalDisksGuid}, {PcdToken(PcdUnixCpuModel), &gEfiUnixCPUModelGuid}, @@ -293,10 +294,10 @@ Returns: { EFI_STATUS Status; EFI_STATUS InstallStatus; - EFI_UNIX_THUNK_PROTOCOL *UnixThunk; + EFI_UNIX_THUNK_PROTOCOL *UnixThunk; EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; - UNIX_BUS_DEVICE *UnixBusDevice; - UNIX_IO_DEVICE *UnixDevice; + UNIX_BUS_DEVICE *UnixBusDevice; + UNIX_IO_DEVICE *UnixDevice; UINTN Index; CHAR16 *StartString; CHAR16 *SubString; @@ -428,7 +429,6 @@ Returns: } if (CreateDevice) { - // // Allocate instance structure, and fill in parent information. // @@ -441,7 +441,7 @@ Returns: UnixDevice->ControllerHandle = ControllerHandle; UnixDevice->ParentDevicePath = ParentDevicePath; - UnixDevice->UnixIo.UnixThunk = UnixThunk; + UnixDevice->UnixIo.UnixThunk = UnixThunk; // // Plus 2 to account for the NULL at the end of the Unicode string diff --git a/EdkUnixPkg/Dxe/UnixThunk/Bus/UnixBusDriver/UnixBusDriver.msa b/EdkUnixPkg/Dxe/UnixThunk/Bus/UnixBusDriver/UnixBusDriver.msa index b64a8216de..6422c062f5 100644 --- a/EdkUnixPkg/Dxe/UnixThunk/Bus/UnixBusDriver/UnixBusDriver.msa +++ b/EdkUnixPkg/Dxe/UnixThunk/Bus/UnixBusDriver/UnixBusDriver.msa @@ -1,22 +1,20 @@ - + UnixBusDriver UEFI_DRIVER f320d656-8985-11db-90e0-0040d02b1835 1.0 Unix Bus driver - - This following section documents the envirnoment variables for the Win NT - build. These variables are used to define the (virtual) hardware - configuration of the NT environment - + This following section documents the envirnoment variables for the Win NT + build. These variables are used to define the (virtual) hardware + configuration of the NT environment Copyright (c) 2006, Intel Corporation - All rights reserved. This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + All rights reserved. This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052 @@ -106,6 +104,9 @@ gEfiUnixCPUSpeedGuid + + gEfiUnixSerialPortGuid + EFI_SPECIFICATION_VERSION 0x00020000 @@ -119,41 +120,41 @@ PcdUnixConsole gEfiEdkUnixPkgTokenSpaceGuid - This PCD declares the title string of the text console window. - such as "My EFI Console". + This PCD declares the title string of the text console window. + such as "My EFI Console". The item type of this PCD can only be "DYNAMIC". PcdUnixUga gEfiEdkUnixPkgTokenSpaceGuid - This PCD declares the resolutions for the UGA windows. + This PCD declares the resolutions for the UGA windows. The item type of this PCD can only be "DYNAMIC". PcdUnixFileSystem gEfiEdkUnixPkgTokenSpaceGuid - This PCD defines the unix directory who will be mounted as - harddisk in simulator. + This PCD defines the unix directory who will be mounted as + harddisk in simulator. The item type of this PCD can only be "DYNAMIC". PcdUnixVirtualDisk gEfiEdkUnixPkgTokenSpaceGuid - This PCD defines the devices which use a file to emulate a hard disk or - removable media device + This PCD defines the devices which use a file to emulate a hard disk or + removable media device The item type if this PCD can only be "DYNAMIC". PcdUnixPhysicalDisk gEfiEdkUnixPkgTokenSpaceGuid - This PCD defines physical disk which will be simualted as a - harddisk in simulator. + This PCD defines physical disk which will be simualted as a + harddisk in simulator. The item type of this PCD can only be "DYNAMIC". PcdUnixCpuModel gEfiEdkUnixPkgTokenSpaceGuid - This PCD defines simulated CPU model string. + This PCD defines simulated CPU model string. The item type of this PCD can only be "DYNAMIC". @@ -164,8 +165,13 @@ PcdUnixMemorySize gEfiEdkUnixPkgTokenSpaceGuid - This PCD defines the size of simulated memory size. + This PCD defines the size of simulated memory size. The item type of this PCD can only be "DYNAMIC". + + PcdUnixSerialPort + gEfiEdkUnixPkgTokenSpaceGuid + Simulation serial IO port + - + \ No newline at end of file diff --git a/EdkUnixPkg/EdkUnixPkg.spd b/EdkUnixPkg/EdkUnixPkg.spd index c4360e89f2..a9622dd4bb 100644 --- a/EdkUnixPkg/EdkUnixPkg.spd +++ b/EdkUnixPkg/EdkUnixPkg.spd @@ -1,15 +1,5 @@ - - - + + EdkUnixPkg f2805c44-8985-11db-9e98-0040d02b1835 @@ -26,7 +16,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052 - true + false false @@ -92,6 +82,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. Dxe/UnixThunk/Bus/Console/UnixConsole.msa Dxe/UnixThunk/Bus/SimpleFileSystem/UnixSimpleFileSystem.msa Dxe/UnixThunk/Bus/Uga/UnixUga.msa + Dxe/UnixThunk/Bus/SerialIo/UnixSerialIo.msa Dxe/UnixThunk/Bus/UnixBusDriver/UnixBusDriver.msa Dxe/UnixThunk/Chipset/Metronome/Metronome.msa Dxe/UnixThunk/Chipset/RealTimeClock/RealTimeClock.msa @@ -172,6 +163,11 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. f2de8f12-8985-11db-aabc-0040d02b1835 + + gEfiUnixSerialPortGuid + 6d3a727d-66c8-4d19-87e6-0215861490f3 + + @@ -220,7 +216,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. VOID* DYNAMIC L"E:RW;245760;512" - This PCD defines physical disk which will be simualted as a + This PCD defines physical disk which will be simualted as a harddisk in simulator. The item type of this PCD can only be "DYNAMIC". @@ -230,7 +226,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. VOID* DYNAMIC L"FW;40960;512" - This PCD defines the devices which use a file to emulate a hard disk or + This PCD defines the devices which use a file to emulate a hard disk or removable media device.The item type of this PCD can only be "DYNAMIC". @@ -240,7 +236,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. VOID* DYNAMIC L"UGA Window" - This PCD declares the resolutions for the UGA windows. + This PCD declares the resolutions for the UGA windows. The item type of this PCD can only be "DYNAMIC". @@ -250,8 +246,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. VOID* DYNAMIC L".!..\\..\\..\\..\\..\\EdkShellBinPkg\\bin\\ia32\\Apps" - This PCD defines the host directory who will be mounted as - harddisk in simulator. + This PCD defines the host directory who will be mounted as + harddisk in simulator. The item type of this PCD can only be "DYNAMIC". @@ -261,8 +257,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. VOID* DYNAMIC L"64!64" - This PCD defines the memory size of simulated machine. Simulator will allocate - the size of PcdUnixMemorySize in host platform. + This PCD defines the memory size of simulated machine. Simulator will allocate + the size of PcdUnixMemorySize in host platform. The item type of this PCD can only be "DYNAMIC". @@ -272,18 +268,18 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. UINT32 FIXED_AT_BUILD PATCHABLE_IN_MODULE 1 - This PCD defines the boot mode for simualtor. - The boot mode can be set as following value: - 0x0: Boot with full configuration. - 0x1: Boot with minimal configuration. - 0x2: Boot assume no configuration changes. - 0x3: Boot with full configuration plus diagnostics. - 0x4: Boot with default settings. - 0x5: Boot on S4 resume. - 0x6: Boot on S5 resume. - 0x10: Boot on S2 resume. - 0x11: Boot on S3 resume. - 0x12: Boot on flash update. + This PCD defines the boot mode for simualtor. + The boot mode can be set as following value: + 0x0: Boot with full configuration. + 0x1: Boot with minimal configuration. + 0x2: Boot assume no configuration changes. + 0x3: Boot with full configuration plus diagnostics. + 0x4: Boot with default settings. + 0x5: Boot on S4 resume. + 0x6: Boot on S5 resume. + 0x10: Boot on S2 resume. + 0x11: Boot on S3 resume. + 0x12: Boot on flash update. 0x20: Boot in reovery mode. @@ -293,7 +289,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. VOID* DYNAMIC L"Intel(R) Processor Model" - This PCD defines simulated CPU model string. + This PCD defines simulated CPU model string. The item type of this PCD can only be "DYNAMIC". @@ -303,7 +299,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. VOID* DYNAMIC L"3000" - This PCD defines simulated CPU speed string. + This PCD defines simulated CPU speed string. The item type of this PCD can only be "DYNAMIC". @@ -322,8 +318,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. VOID* DYNAMIC L"Bus Driver Console Window" - This PCD declares the title string of the text console window. - such as "My EFI Console". + This PCD declares the title string of the text console window. + such as "My EFI Console". The item type of this PCD can only be "DYNAMIC". @@ -333,8 +329,17 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. VOID* FIXED_AT_BUILD PATCHABLE_IN_MODULE L"64!64" - This PCD defines the memory size of simulated machine. Simulator will allocate + This PCD defines the memory size of simulated machine. Simulator will allocate the size of PcdUnixMemorySizeForSecMain in host platform. + + PcdUnixSerialPort + 0x00001002 + gEfiEdkUnixPkgTokenSpaceGuid + VOID* + DYNAMIC + L"/dev/ttyS0" + Simulation serial IO port + - + \ No newline at end of file diff --git a/EdkUnixPkg/Include/Protocol/UnixIo.h b/EdkUnixPkg/Include/Protocol/UnixIo.h index 2d8e9fab7d..1758ecb7c4 100644 --- a/EdkUnixPkg/Include/Protocol/UnixIo.h +++ b/EdkUnixPkg/Include/Protocol/UnixIo.h @@ -69,6 +69,16 @@ extern EFI_GUID gEfiUnixPhysicalDisksGuid; extern EFI_GUID gEfiUnixFileSystemGuid; +// +// EFI_WIN_NT_SERIAL_PORT +// +#define EFI_UNIX_SERIAL_PORT_GUID \ + { \ + 0x6d3a727d, 0x66c8, 0x4d19, {0x87, 0xe6, 0x2, 0x15, 0x86, 0x14, 0x90, 0xf3} \ + } + +extern EFI_GUID gEfiUnixSerialPortGuid; + // // EFI_UNIX_UGA // diff --git a/EdkUnixPkg/Include/Protocol/UnixThunk.h b/EdkUnixPkg/Include/Protocol/UnixThunk.h index aabb9b130d..1fa4e90204 100644 --- a/EdkUnixPkg/Include/Protocol/UnixThunk.h +++ b/EdkUnixPkg/Include/Protocol/UnixThunk.h @@ -28,6 +28,7 @@ Abstract: #ifndef _UNIX_THUNK_H_ #define _UNIX_THUNK_H_ +#include #define EFI_UNIX_THUNK_PROTOCOL_GUID \ { \ @@ -137,6 +138,43 @@ typedef EFI_STATUS (*UnixUgaCreate)(struct _EFI_UNIX_UGA_IO_PROTOCOL **UgaIo, CONST CHAR16 *Title); + +typedef +int +(*UnixTcflush) (int fildes, int queue_selector); + +typedef +void +(*UnixPerror) (__const char *__s); + +typedef +void +(*UnixPrintf) (const char* format, ...); + +typedef +int +(*UnixIoCtl) (int fd, unsigned long int __request, ...); + +typedef +int +(*UnixFcntl) (int __fd, int __cmd, ...); + +typedef +int +(*UnixCfsetispeed) (struct termios *__termios_p, speed_t __speed); + +typedef +int +(*UnixCfsetospeed) (struct termios *__termios_p, speed_t __speed); + +typedef +int +(*UnixTcgetattr) (int __fd, struct termios *__termios_p); + +typedef +int +(*UnixTcsetattr) (int __fd, int __optional_actions, + __const struct termios *__termios_p); // // @@ -147,14 +185,14 @@ EFI_STATUS typedef struct _EFI_UNIX_THUNK_PROTOCOL { UINT64 Signature; - UnixSleep Sleep; + UnixSleep Sleep; UnixExit Exit; - UnixSetTimer SetTimer; - UnixGetLocalTime GetLocalTime; + UnixSetTimer SetTimer; + UnixGetLocalTime GetLocalTime; UnixGmTime GmTime; UnixGetTimeZone GetTimeZone; UnixGetDayLight GetDayLight; - UnixPoll Poll; + UnixPoll Poll; UnixRead Read; UnixWrite Write; UnixGetenv Getenv; @@ -177,9 +215,16 @@ typedef struct _EFI_UNIX_THUNK_PROTOCOL { UnixFSync FSync; UnixChmod Chmod; UnixUTime UTime; - - UnixUgaCreate UgaCreate; - + UnixTcflush Tcflush; + UnixUgaCreate UgaCreate; + UnixPerror Perror; + UnixPrintf Printf; + UnixIoCtl IoCtl; + UnixFcntl Fcntl; + UnixCfsetispeed Cfsetispeed; + UnixCfsetospeed Cfsetospeed; + UnixTcgetattr Tcgetattr; + UnixTcsetattr Tcsetattr; } EFI_UNIX_THUNK_PROTOCOL; extern EFI_GUID gEfiUnixThunkProtocolGuid; diff --git a/EdkUnixPkg/Sec/UnixThunk.c b/EdkUnixPkg/Sec/UnixThunk.c index c1988faf59..9d74b5b8c3 100644 --- a/EdkUnixPkg/Sec/UnixThunk.c +++ b/EdkUnixPkg/Sec/UnixThunk.c @@ -37,7 +37,8 @@ Abstract: #include #include #include -#include +#include +#include static int settimer_initialized; static struct timeval settimer_timeval; @@ -187,8 +188,16 @@ EFI_UNIX_THUNK_PROTOCOL mUnixThunkTable = { fsync, chmod, utime, - - UgaCreate, + tcflush, + UgaCreate, + perror, + printf, + ioctl, + fcntl, + cfsetispeed, + cfsetospeed, + tcgetattr, + tcsetattr }; diff --git a/EdkUnixPkg/Unix.fpd b/EdkUnixPkg/Unix.fpd index c48a5e78c6..012b70b1c5 100644 --- a/EdkUnixPkg/Unix.fpd +++ b/EdkUnixPkg/Unix.fpd @@ -6938,7 +6938,7 @@ gEfiMdePkgTokenSpaceGuid UINT32 4 - 0x80000000 + 0x80000040 PcdComponentNameDisable @@ -7028,6 +7028,14 @@ 4 320 + + PcdUnixSerialPort + 0x00001002 + gEfiEdkUnixPkgTokenSpaceGuid + VOID* + 20 + L"/dev/ttyS0" + FV_RECOVERY @@ -7646,6 +7654,131 @@ Logo + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + PcdMaximumUnicodeStringLength + 0x00000001 + gEfiMdePkgTokenSpaceGuid + UINT32 + 4 + 1000000 + + + PcdMaximumAsciiStringLength + 0x00000002 + gEfiMdePkgTokenSpaceGuid + UINT32 + 4 + 1000000 + + + PcdMaximumLinkedListLength + 0x00000003 + gEfiMdePkgTokenSpaceGuid + UINT32 + 4 + 1000000 + + + PcdSpinLockTimeout + 0x00000004 + gEfiMdePkgTokenSpaceGuid + UINT32 + 4 + 10000000 + + + PcdUefiLibMaxPrintBufferSize + 0x101 + gEfiMdePkgTokenSpaceGuid + UINT32 + 4 + 320 + + + PcdComponentNameDisable + 0x0000000d + gEfiMdePkgTokenSpaceGuid + BOOLEAN + 1 + FALSE + + + PcdDriverDiagnosticsDisable + 0x0000000e + gEfiMdePkgTokenSpaceGuid + BOOLEAN + 1 + FALSE + + + PcdDebugPropertyMask + 0x00000005 + gEfiMdePkgTokenSpaceGuid + UINT8 + 1 + 0x0f + + + PcdDebugClearMemoryValue + 0x00000008 + gEfiMdePkgTokenSpaceGuid + UINT8 + 1 + 0xAF + + + PcdDebugPrintErrorLevel + 0x00000006 + gEfiMdePkgTokenSpaceGuid + UINT32 + 4 + 0x80000040 + + + PcdReportStatusCodePropertyMask + 0x00000007 + gEfiMdePkgTokenSpaceGuid + UINT8 + 1 + 0x06 + + + + FV_RECOVERY + BS_DRIVER + + @@ -7802,6 +7935,17 @@ L"64!64" + + PcdUnixSerialPort + 0x00001002 + gEfiEdkUnixPkgTokenSpaceGuid + VOID* + 20 + + 0 + L"/dev/ttyS0" + + @@ -7884,6 +8028,7 @@ +