From b2a41b1e403db9bfa6abbebccd4067c7892dbeda Mon Sep 17 00:00:00 2001 From: Ruiyu Ni Date: Wed, 10 Jun 2015 04:18:05 +0000 Subject: [PATCH] MdeModulePkg: Extend PcdSerialClockRate to dynamic type So it could allow platform module to change the serial clock rate per different hardware. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni Cc: Feng Tian git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17606 6f19259b-4bc3-4df7-8a09-765794883524 --- MdeModulePkg/MdeModulePkg.dec | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec index 39793b878f..15d351d4ea 100644 --- a/MdeModulePkg/MdeModulePkg.dec +++ b/MdeModulePkg/MdeModulePkg.dec @@ -890,10 +890,6 @@ # @Prompt Memory profile memory type. gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042 - ## UART clock frequency is for the baud rate configuration. - # @Prompt Serial Port Clock Rate. - gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066 - ## PCI Serial Device Info. It is an array of Device, Function, and Power Management # information that describes the path that contains zero or more PCI to PCI briges # followed by a PCI serial device. Each array entry is 4-bytes in length. The @@ -968,6 +964,10 @@ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] + ## UART clock frequency is for the baud rate configuration. + # @Prompt Serial Port Clock Rate. + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066 + ## This PCD points to the front page formset GUID # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e