diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h index cf337b7190..0733da131b 100644 --- a/MdePkg/Include/Library/BaseLib.h +++ b/MdePkg/Include/Library/BaseLib.h @@ -604,6 +604,134 @@ StrHexToUint64 ( IN CONST CHAR16 *String ); +/** + Convert a nibble in the low 4 bits of a byte to a Unicode hexadecimal character. + + This function converts a nibble in the low 4 bits of a byte to a Unicode hexadecimal + character For example, the nibble 0x01 and 0x0A will converted to L'1' and L'A' + respectively. + + The upper nibble in the input byte will be masked off. + + @param Nibble The nibble which is in the low 4 bits of the input byte. + + @retval CHAR16 The Unicode hexadecimal character. + +**/ +CHAR16 +EFIAPI +NibbleToHexChar ( + IN UINT8 Nibble + ) +; + +/** + Convert binary buffer to a Unicode String in a specified sequence. + + This function converts bytes in the binary Buffer Buf to a Unicode String Str. + Each byte will be represented by two Unicode characters. For example, byte 0xA1 will + be converted into two Unicode character L'A' and L'1'. In the output String, the Unicode Character + for the Most Significant Nibble will be put before the Unicode Character for the Least Significant + Nibble. The output string for the buffer containing a single byte 0xA1 will be L"A1". + For a buffer with multiple bytes, the Unicode character produced by the first byte will be put into the + the last character in the output string. The one next to first byte will be put into the + character before the last character. This rules applies to the rest of the bytes. The Unicode + character by the last byte will be put into the first character in the output string. For example, + the input buffer for a 64-bits unsigned integrer 0x12345678abcdef1234 will be converted to + a Unicode string equal to L"12345678abcdef1234". + + @param String On input, String is pointed to the buffer allocated for the convertion. + @param StringLen The Length of String buffer to hold the output String. The length must include the tailing '\0' character. + The StringLen required to convert a N bytes Buffer will be a least equal to or greater + than 2*N + 1. + @param Buffer The pointer to a input buffer. + @param BufferSizeInBytes Lenth in bytes of the input buffer. + + + @retval EFI_SUCCESS The convertion is successfull. All bytes in Buffer has been convert to the corresponding + Unicode character and placed into the right place in String. + @retval EFI_BUFFER_TOO_SMALL StringSizeInBytes is smaller than 2 * N + 1the number of bytes required to + complete the convertion. +**/ +RETURN_STATUS +EFIAPI +BufToHexString ( + IN OUT CHAR16 *String, + IN OUT UINTN *StringLen, + IN CONST UINT8 *Buffer, + IN UINTN BufferSizeInBytes + ) +; + + +/** + Convert a Unicode string consisting of hexadecimal characters to a output byte buffer. + + This function converts a Unicode string consisting of characters in the range of Hexadecimal + character (L'0' to L'9', L'A' to L'F' and L'a' to L'f') to a output byte buffer. The function will stop + at the first non-hexadecimal character or the NULL character. The convertion process can be + simply viewed as the reverse operations defined by BufToHexString. Two Unicode characters will be + converted into one byte. The first Unicode character represents the Most Significant Nibble and the + second Unicode character represents the Least Significant Nibble in the output byte. + The first pair of Unicode characters represents the last byte in the output buffer. The second pair of Unicode + characters represent the the byte preceding the last byte. This rule applies to the rest pairs of bytes. + The last pair represent the first byte in the output buffer. + + For example, a Unciode String L"12345678" will be converted into a buffer wil the following bytes + (first byte is the byte in the lowest memory address): "0x78, 0x56, 0x34, 0x12". + + If String has N valid hexadecimal characters for conversion, the caller must make sure Buffer is at least + N/2 (if N is even) or (N+1)/2 (if N if odd) bytes. + + @param Buffer The output buffer allocated by the caller. + @param BufferSizeInBytes On input, the size in bytes of Buffer. On output, it is updated to + contain the size of the Buffer which is actually used for the converstion. + For Unicode string with 2*N hexadecimal characters (not including the + tailing NULL character), N bytes of Buffer will be used for the output. + @param String The input hexadecimal string. + @param ConvertedStrLen The number of hexadecimal characters used to produce content in output + buffer Buffer. + + @retval RETURN_BUFFER_TOO_SMALL The input BufferSizeInBytes is too small to hold the output. BufferSizeInBytes + will be updated to the size required for the converstion. + @retval RETURN_SUCCESS The convertion is successful or the first Unicode character from String + is hexadecimal. If ConvertedStrLen is not NULL, it is updated + to the number of hexadecimal character used for the converstion. +**/ +RETURN_STATUS +EFIAPI +HexStringToBuf ( + OUT UINT8 *Buffer, + IN OUT UINTN *BufferSizeInBytes, + IN CONST CHAR16 *String, + OUT UINTN *ConvertedStrLen OPTIONAL + ) +; + + +/** + Test if a Unicode character is a hexadecimal digit. If true, the input + Unicode character is converted to a byte. + + This function tests if a Unicode character is a hexadecimal digit. If true, the input + Unicode character is converted to a byte. For example, Unicode character + L'A' will be converted to 0x0A. + + If Digit is NULL, then ASSERT. + + @retval TRUE Char is in the range of Hexadecimal number. Digit is updated + to the byte value of the number. + @retval FALSE Char is not in the range of Hexadecimal number. Digit is keep + intact. + +**/ +BOOLEAN +EFIAPI +IsHexDigit ( + OUT UINT8 *Digit, + IN CHAR16 Char + ) +; /** Convert one Null-terminated Unicode string to a Null-terminated @@ -7108,3 +7236,4 @@ AsmPrepareAndThunk16 ( #endif + diff --git a/MdePkg/Include/Library/IfrSupportLib.h b/MdePkg/Include/Library/IfrSupportLib.h index e3885e1db3..b8d3183e87 100644 --- a/MdePkg/Include/Library/IfrSupportLib.h +++ b/MdePkg/Include/Library/IfrSupportLib.h @@ -1,5 +1,5 @@ /** @file - The file contain all library functions and definitions for IFR opcode creation and + The file contain all library functions and definitions for IFR opcode creation and related Form Browser utility Operations. Copyright (c) 2007, Intel Corporation @@ -11,594 +11,590 @@ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _IFR_SUPPORT_LIBRARY_H -#define _IFR_SUPPORT_LIBRARY_H - - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -// -// The architectural variable "Lang" and "LangCodes" are deprecated in UEFI -// specification. While, UEFI specification also states that these deprecated -// variables may be provided for backwards compatibility. -// If "LANG_SUPPORT" is defined, "Lang" and "LangCodes" will be produced; -// If "LANG_SUPPORT" is undefined, "Lang" and "LangCodes" will not be produced. -// -#define LANG_SUPPORT - -#define EFI_LANGUAGE_VARIABLE L"Lang" -#define EFI_LANGUAGE_CODES_VARIABLE L"LangCodes" - -#define UEFI_LANGUAGE_VARIABLE L"PlatformLang" -#define UEFI_LANGUAGE_CODES_VARIABLE L"PlatformLangCodes" - -// -// Limited buffer size recommended by RFC4646 (4.3. Length Considerations) -// (42 characters plus a NULL terminator) -// -#define RFC_3066_ENTRY_SIZE (42 + 1) -#define ISO_639_2_ENTRY_SIZE 3 - -#define INVALID_VARSTORE_ID 0 - -#define QUESTION_FLAGS (EFI_IFR_FLAG_READ_ONLY | EFI_IFR_FLAG_CALLBACK | EFI_IFR_FLAG_RESET_REQUIRED | EFI_IFR_FLAG_OPTIONS_ONLY) -#define QUESTION_FLAGS_MASK (~QUESTION_FLAGS) - -extern EFI_HII_DATABASE_PROTOCOL *gIfrLibHiiDatabase; -extern EFI_HII_STRING_PROTOCOL *gIfrLibHiiString; - -#pragma pack(1) -typedef struct { - EFI_STRING_ID StringToken; - EFI_IFR_TYPE_VALUE Value; - UINT8 Flags; -} IFR_OPTION; -#pragma pack() - -typedef struct { - // - // Buffer size allocated for Data. - // - UINT32 BufferSize; - - // - // Offset in Data to append the newly created opcode binary. - // It will be adjusted automatically in Create***OpCode(), and should be - // initialized to 0 before invocation of a serial of Create***OpCode() - // - UINT32 Offset; - - // - // The destination buffer for created op-codes - // - UINT8 *Data; -} EFI_HII_UPDATE_DATA; - - -/** - Create EFI_IFR_END_OP opcode. - - If Data is NULL or Data->Data is NULL, then ASSERT. - - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - -**/ -EFI_STATUS -EFIAPI -CreateEndOpCode ( - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_DEFAULT_OP opcode. - - @param Value Value for the default - @param Type Type for the default - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - @retval EFI_INVALID_PARAMETER The type is not valid. - -**/ -EFI_STATUS -EFIAPI -CreateDefaultOpCode ( - IN EFI_IFR_TYPE_VALUE *Value, - IN UINT8 Type, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_ACTION_OP opcode. - - @param QuestionId Question ID - @param Prompt String ID for Prompt - @param Help String ID for Help - @param QuestionFlags Flags in Question Header - @param QuestionConfig String ID for configuration - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. - -**/ -EFI_STATUS -EFIAPI -CreateActionOpCode ( - IN EFI_QUESTION_ID QuestionId, - IN EFI_STRING_ID Prompt, - IN EFI_STRING_ID Help, - IN UINT8 QuestionFlags, - IN EFI_STRING_ID QuestionConfig, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_SUBTITLE_OP opcode. - - @param Prompt String ID for Prompt - @param Help String ID for Help - @param Flags Subtitle opcode flags - @param Scope Subtitle Scope bit - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - -**/ -EFI_STATUS -EFIAPI -CreateSubTitleOpCode ( - IN EFI_STRING_ID Prompt, - IN EFI_STRING_ID Help, - IN UINT8 Flags, - IN UINT8 Scope, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_TEXT_OP opcode. - - @param Prompt String ID for Prompt - @param Help String ID for Help - @param TextTwo String ID for text two - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - -**/ -EFI_STATUS -EFIAPI -CreateTextOpCode ( - IN EFI_STRING_ID Prompt, - IN EFI_STRING_ID Help, - IN EFI_STRING_ID TextTwo, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_REF_OP opcode. - - @param FormId Destination Form ID - @param Prompt String ID for Prompt - @param Help String ID for Help - @param QuestionFlags Flags in Question Header - @param QuestionId Question ID - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. - -**/ -EFI_STATUS -EFIAPI -CreateGotoOpCode ( - IN EFI_FORM_ID FormId, - IN EFI_STRING_ID Prompt, - IN EFI_STRING_ID Help, - IN UINT8 QuestionFlags, - IN EFI_QUESTION_ID QuestionId, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_ONE_OF_OPTION_OP opcode. - - @param QuestionId Question ID - @param OptionList The list of Options. - @param Type The data type. - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - -**/ -EFI_STATUS -EFIAPI -CreateOneOfOptionOpCode ( - IN UINTN OptionCount, - IN IFR_OPTION *OptionsList, - IN UINT8 Type, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_ONE_OF_OP opcode. - - @param QuestionId Question ID - @param VarStoreId Storage ID - @param VarOffset Offset in Storage - @param Prompt String ID for Prompt - @param Help String ID for Help - @param QuestionFlags Flags in Question Header - @param OneOfFlags Flags for oneof opcode - @param OptionsList List of options - @param OptionCount Number of options in option list - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. - -**/ -EFI_STATUS -EFIAPI -CreateOneOfOpCode ( - IN EFI_QUESTION_ID QuestionId, - IN EFI_VARSTORE_ID VarStoreId, - IN UINT16 VarOffset, - IN EFI_STRING_ID Prompt, - IN EFI_STRING_ID Help, - IN UINT8 QuestionFlags, - IN UINT8 OneOfFlags, - IN IFR_OPTION *OptionsList, - IN UINTN OptionCount, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_ORDERED_LIST_OP opcode. - - @param QuestionId Question ID - @param VarStoreId Storage ID - @param VarOffset Offset in Storage - @param Prompt String ID for Prompt - @param Help String ID for Help - @param QuestionFlags Flags in Question Header - @param Flags Flags for ordered list opcode - @param DataType Type for option value - @param MaxContainers Maximum count for options in this ordered list - @param OptionsList List of options - @param OptionCount Number of options in option list - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. - -**/ -EFI_STATUS -EFIAPI -CreateOrderedListOpCode ( - IN EFI_QUESTION_ID QuestionId, - IN EFI_VARSTORE_ID VarStoreId, - IN UINT16 VarOffset, - IN EFI_STRING_ID Prompt, - IN EFI_STRING_ID Help, - IN UINT8 QuestionFlags, - IN UINT8 Flags, - IN UINT8 DataType, - IN UINT8 MaxContainers, - IN IFR_OPTION *OptionsList, - IN UINTN OptionCount, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_CHECKBOX_OP opcode. - - @param QuestionId Question ID - @param VarStoreId Storage ID - @param VarOffset Offset in Storage - @param Prompt String ID for Prompt - @param Help String ID for Help - @param QuestionFlags Flags in Question Header - @param CheckBoxFlags Flags for checkbox opcode - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. - -**/ -EFI_STATUS -EFIAPI -CreateCheckBoxOpCode ( - IN EFI_QUESTION_ID QuestionId, - IN EFI_VARSTORE_ID VarStoreId, - IN UINT16 VarOffset, - IN EFI_STRING_ID Prompt, - IN EFI_STRING_ID Help, - IN UINT8 QuestionFlags, - IN UINT8 CheckBoxFlags, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_NUMERIC_OP opcode. - - @param QuestionId Question ID - @param VarStoreId Storage ID - @param VarOffset Offset in Storage - @param Prompt String ID for Prompt - @param Help String ID for Help - @param QuestionFlags Flags in Question Header - @param NumericFlags Flags for numeric opcode - @param Minimum Numeric minimum value - @param Maximum Numeric maximum value - @param Step Numeric step for edit - @param Default Numeric default value - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. - -**/ -EFI_STATUS -EFIAPI -CreateNumericOpCode ( - IN EFI_QUESTION_ID QuestionId, - IN EFI_VARSTORE_ID VarStoreId, - IN UINT16 VarOffset, - IN EFI_STRING_ID Prompt, - IN EFI_STRING_ID Help, - IN UINT8 QuestionFlags, - IN UINT8 NumericFlags, - IN UINT64 Minimum, - IN UINT64 Maximum, - IN UINT64 Step, - IN UINT64 Default, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Create EFI_IFR_STRING_OP opcode. - - @param QuestionId Question ID - @param VarStoreId Storage ID - @param VarOffset Offset in Storage - @param Prompt String ID for Prompt - @param Help String ID for Help - @param QuestionFlags Flags in Question Header - @param StringFlags Flags for string opcode - @param MinSize String minimum length - @param MaxSize String maximum length - @param Data Destination for the created opcode binary - - @retval EFI_SUCCESS Opcode create success - @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. - @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. - -**/ -EFI_STATUS -EFIAPI -CreateStringOpCode ( - IN EFI_QUESTION_ID QuestionId, - IN EFI_VARSTORE_ID VarStoreId, - IN UINT16 VarOffset, - IN EFI_STRING_ID Prompt, - IN EFI_STRING_ID Help, - IN UINT8 QuestionFlags, - IN UINT8 StringFlags, - IN UINT8 MinSize, - IN UINT8 MaxSize, - IN OUT EFI_HII_UPDATE_DATA *Data - ) -; - -/** - Converts binary buffer to Unicode string in reversed byte order to BufToHexString(). - - @param Str String for output - @param Buffer Binary buffer. - @param BufferSize Size of the buffer in bytes. - - @retval EFI_SUCCESS The function completed successfully. - -**/ -EFI_STATUS -EFIAPI -BufferToHexString ( - IN OUT CHAR16 *Str, - IN UINT8 *Buffer, - IN UINTN BufferSize - ) -; - -/** - Converts Hex String to binary buffer in reversed byte order to HexStringToBuf(). - - @param Buffer Pointer to buffer that receives the data. - @param BufferSize Length in bytes of the buffer to hold converted - data. If routine return with EFI_SUCCESS, - containing length of converted data. If routine - return with EFI_BUFFER_TOO_SMALL, containg length - of buffer desired. - @param Str String to be converted from. - - @retval EFI_SUCCESS The function completed successfully. - -**/ -EFI_STATUS -EFIAPI -HexStringToBuffer ( - IN OUT UINT8 *Buffer, - IN OUT UINTN *BufferSize, - IN CHAR16 *Str - ) -; - -/** - Construct using routing information GUID/NAME/PATH. - - @param ConfigHdr Pointer to the ConfigHdr string. - @param StrBufferLen On input: Length in bytes of buffer to hold the - ConfigHdr string. Includes tailing '\0' character. - On output: If return EFI_SUCCESS, containing - length of ConfigHdr string buffer. If return - EFI_BUFFER_TOO_SMALL, containg length of string - buffer desired. - @param Guid Routing information: GUID. - @param Name Routing information: NAME. - @param DriverHandle Driver handle which contains the routing - information: PATH. - - @retval EFI_SUCCESS Routine success. - @retval EFI_BUFFER_TOO_SMALL The ConfigHdr string buffer is too small. - -**/ -EFI_STATUS -EFIAPI -ConstructConfigHdr ( - IN OUT CHAR16 *ConfigHdr, - IN OUT UINTN *StrBufferLen, - IN EFI_GUID *Guid, - IN CHAR16 *Name, OPTIONAL - IN EFI_HANDLE *DriverHandle - ) - -; - -/** - Search BlockName "&OFFSET=Offset&WIDTH=Width" in a string. - - @param String The string to be searched in. - @param Offset Offset in BlockName. - @param Width Width in BlockName. - - @retval TRUE Block name found. - @retval FALSE Block name not found. - -**/ -BOOLEAN -EFIAPI -FindBlockName ( - IN OUT CHAR16 *String, - UINTN Offset, - UINTN Width - ) -; - -/** - This routine is invoked by ConfigAccess.Callback() to retrived uncommitted data from Form Browser. - - @param VariableGuid An optional field to indicate the target variable - GUID name to use. - @param VariableName An optional field to indicate the target - human-readable variable name. - @param BufferSize On input: Length in bytes of buffer to hold - retrived data. On output: If return - EFI_BUFFER_TOO_SMALL, containg length of buffer - desired. - @param Buffer Buffer to hold retrived data. - - @retval EFI_SUCCESS Routine success. - @retval EFI_BUFFER_TOO_SMALL The intput buffer is too small. - -**/ -EFI_STATUS -EFIAPI -GetBrowserData ( - EFI_GUID *VariableGuid, OPTIONAL - CHAR16 *VariableName, OPTIONAL - UINTN *BufferSize, - UINT8 *Buffer - ) -; - -/** - This routine is invoked by ConfigAccess.Callback() to update uncommitted data of Form Browser. - - @param VariableGuid An optional field to indicate the target variable - GUID name to use. - @param VariableName An optional field to indicate the target - human-readable variable name. - @param BufferSize Length in bytes of buffer to hold retrived data. - @param Buffer Buffer to hold retrived data. - @param RequestElement An optional field to specify which part of the - buffer data will be send back to Browser. If NULL, - the whole buffer of data will be committed to - Browser. ::= - &OFFSET=&WIDTH=* - - @retval EFI_SUCCESS Routine success. - @retval Other Updating Browser uncommitted data failed. - -**/ -EFI_STATUS -EFIAPI -SetBrowserData ( - EFI_GUID *VariableGuid, OPTIONAL - CHAR16 *VariableName, OPTIONAL - UINTN BufferSize, - UINT8 *Buffer, - CHAR16 *RequestElement OPTIONAL - ) -; - -/** - Draw a dialog and return the selected key. - - @param NumberOfLines The number of lines for the dialog box - @param KeyValue The EFI_KEY value returned if HotKey is TRUE.. - @param String Pointer to the first string in the list - @param ... A series of (quantity == NumberOfLines) text - strings which will be used to construct the dialog - box - - @retval EFI_SUCCESS Displayed dialog and received user interaction - @retval EFI_INVALID_PARAMETER One of the parameters was invalid. - -**/ - -EFI_STATUS -EFIAPI -IfrLibCreatePopUp ( - IN UINTN NumberOfLines, - OUT EFI_INPUT_KEY *KeyValue, - IN CHAR16 *String, - ... - ) -; - -#endif +**/ + +#ifndef _IFR_SUPPORT_LIBRARY_H +#define _IFR_SUPPORT_LIBRARY_H + + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +// +// The architectural variable "Lang" and "LangCodes" are deprecated in UEFI +// specification. While, UEFI specification also states that these deprecated +// variables may be provided for backwards compatibility. + +#define EFI_LANGUAGE_VARIABLE L"Lang" +#define EFI_LANGUAGE_CODES_VARIABLE L"LangCodes" + +#define UEFI_LANGUAGE_VARIABLE L"PlatformLang" +#define UEFI_LANGUAGE_CODES_VARIABLE L"PlatformLangCodes" + +// +// Limited buffer size recommended by RFC4646 (4.3. Length Considerations) +// (42 characters plus a NULL terminator) +// +#define RFC_3066_ENTRY_SIZE (42 + 1) +#define ISO_639_2_ENTRY_SIZE 3 + +#define INVALID_VARSTORE_ID 0 + +#define QUESTION_FLAGS (EFI_IFR_FLAG_READ_ONLY | EFI_IFR_FLAG_CALLBACK | EFI_IFR_FLAG_RESET_REQUIRED | EFI_IFR_FLAG_OPTIONS_ONLY) +#define QUESTION_FLAGS_MASK (~QUESTION_FLAGS) + +extern EFI_HII_DATABASE_PROTOCOL *gIfrLibHiiDatabase; +extern EFI_HII_STRING_PROTOCOL *gIfrLibHiiString; + +#pragma pack(1) +typedef struct { + EFI_STRING_ID StringToken; + EFI_IFR_TYPE_VALUE Value; + UINT8 Flags; +} IFR_OPTION; +#pragma pack() + +typedef struct { + // + // Buffer size allocated for Data. + // + UINT32 BufferSize; + + // + // Offset in Data to append the newly created opcode binary. + // It will be adjusted automatically in Create***OpCode(), and should be + // initialized to 0 before invocation of a serial of Create***OpCode() + // + UINT32 Offset; + + // + // The destination buffer for created op-codes + // + UINT8 *Data; +} EFI_HII_UPDATE_DATA; + + +/** + Create EFI_IFR_END_OP opcode. + + If Data is NULL or Data->Data is NULL, then ASSERT. + + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + +**/ +EFI_STATUS +EFIAPI +CreateEndOpCode ( + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_DEFAULT_OP opcode. + + @param Value Value for the default + @param Type Type for the default + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + @retval EFI_INVALID_PARAMETER The type is not valid. + +**/ +EFI_STATUS +EFIAPI +CreateDefaultOpCode ( + IN EFI_IFR_TYPE_VALUE *Value, + IN UINT8 Type, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_ACTION_OP opcode. + + @param QuestionId Question ID + @param Prompt String ID for Prompt + @param Help String ID for Help + @param QuestionFlags Flags in Question Header + @param QuestionConfig String ID for configuration + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. + +**/ +EFI_STATUS +EFIAPI +CreateActionOpCode ( + IN EFI_QUESTION_ID QuestionId, + IN EFI_STRING_ID Prompt, + IN EFI_STRING_ID Help, + IN UINT8 QuestionFlags, + IN EFI_STRING_ID QuestionConfig, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_SUBTITLE_OP opcode. + + @param Prompt String ID for Prompt + @param Help String ID for Help + @param Flags Subtitle opcode flags + @param Scope Subtitle Scope bit + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + +**/ +EFI_STATUS +EFIAPI +CreateSubTitleOpCode ( + IN EFI_STRING_ID Prompt, + IN EFI_STRING_ID Help, + IN UINT8 Flags, + IN UINT8 Scope, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_TEXT_OP opcode. + + @param Prompt String ID for Prompt + @param Help String ID for Help + @param TextTwo String ID for text two + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + +**/ +EFI_STATUS +EFIAPI +CreateTextOpCode ( + IN EFI_STRING_ID Prompt, + IN EFI_STRING_ID Help, + IN EFI_STRING_ID TextTwo, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_REF_OP opcode. + + @param FormId Destination Form ID + @param Prompt String ID for Prompt + @param Help String ID for Help + @param QuestionFlags Flags in Question Header + @param QuestionId Question ID + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. + +**/ +EFI_STATUS +EFIAPI +CreateGotoOpCode ( + IN EFI_FORM_ID FormId, + IN EFI_STRING_ID Prompt, + IN EFI_STRING_ID Help, + IN UINT8 QuestionFlags, + IN EFI_QUESTION_ID QuestionId, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_ONE_OF_OPTION_OP opcode. + + @param QuestionId Question ID + @param OptionList The list of Options. + @param Type The data type. + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + +**/ +EFI_STATUS +EFIAPI +CreateOneOfOptionOpCode ( + IN UINTN OptionCount, + IN IFR_OPTION *OptionsList, + IN UINT8 Type, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_ONE_OF_OP opcode. + + @param QuestionId Question ID + @param VarStoreId Storage ID + @param VarOffset Offset in Storage + @param Prompt String ID for Prompt + @param Help String ID for Help + @param QuestionFlags Flags in Question Header + @param OneOfFlags Flags for oneof opcode + @param OptionsList List of options + @param OptionCount Number of options in option list + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. + +**/ +EFI_STATUS +EFIAPI +CreateOneOfOpCode ( + IN EFI_QUESTION_ID QuestionId, + IN EFI_VARSTORE_ID VarStoreId, + IN UINT16 VarOffset, + IN EFI_STRING_ID Prompt, + IN EFI_STRING_ID Help, + IN UINT8 QuestionFlags, + IN UINT8 OneOfFlags, + IN IFR_OPTION *OptionsList, + IN UINTN OptionCount, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_ORDERED_LIST_OP opcode. + + @param QuestionId Question ID + @param VarStoreId Storage ID + @param VarOffset Offset in Storage + @param Prompt String ID for Prompt + @param Help String ID for Help + @param QuestionFlags Flags in Question Header + @param Flags Flags for ordered list opcode + @param DataType Type for option value + @param MaxContainers Maximum count for options in this ordered list + @param OptionsList List of options + @param OptionCount Number of options in option list + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. + +**/ +EFI_STATUS +EFIAPI +CreateOrderedListOpCode ( + IN EFI_QUESTION_ID QuestionId, + IN EFI_VARSTORE_ID VarStoreId, + IN UINT16 VarOffset, + IN EFI_STRING_ID Prompt, + IN EFI_STRING_ID Help, + IN UINT8 QuestionFlags, + IN UINT8 Flags, + IN UINT8 DataType, + IN UINT8 MaxContainers, + IN IFR_OPTION *OptionsList, + IN UINTN OptionCount, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_CHECKBOX_OP opcode. + + @param QuestionId Question ID + @param VarStoreId Storage ID + @param VarOffset Offset in Storage + @param Prompt String ID for Prompt + @param Help String ID for Help + @param QuestionFlags Flags in Question Header + @param CheckBoxFlags Flags for checkbox opcode + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. + +**/ +EFI_STATUS +EFIAPI +CreateCheckBoxOpCode ( + IN EFI_QUESTION_ID QuestionId, + IN EFI_VARSTORE_ID VarStoreId, + IN UINT16 VarOffset, + IN EFI_STRING_ID Prompt, + IN EFI_STRING_ID Help, + IN UINT8 QuestionFlags, + IN UINT8 CheckBoxFlags, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_NUMERIC_OP opcode. + + @param QuestionId Question ID + @param VarStoreId Storage ID + @param VarOffset Offset in Storage + @param Prompt String ID for Prompt + @param Help String ID for Help + @param QuestionFlags Flags in Question Header + @param NumericFlags Flags for numeric opcode + @param Minimum Numeric minimum value + @param Maximum Numeric maximum value + @param Step Numeric step for edit + @param Default Numeric default value + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. + +**/ +EFI_STATUS +EFIAPI +CreateNumericOpCode ( + IN EFI_QUESTION_ID QuestionId, + IN EFI_VARSTORE_ID VarStoreId, + IN UINT16 VarOffset, + IN EFI_STRING_ID Prompt, + IN EFI_STRING_ID Help, + IN UINT8 QuestionFlags, + IN UINT8 NumericFlags, + IN UINT64 Minimum, + IN UINT64 Maximum, + IN UINT64 Step, + IN UINT64 Default, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Create EFI_IFR_STRING_OP opcode. + + @param QuestionId Question ID + @param VarStoreId Storage ID + @param VarOffset Offset in Storage + @param Prompt String ID for Prompt + @param Help String ID for Help + @param QuestionFlags Flags in Question Header + @param StringFlags Flags for string opcode + @param MinSize String minimum length + @param MaxSize String maximum length + @param Data Destination for the created opcode binary + + @retval EFI_SUCCESS Opcode create success + @retval EFI_BUFFER_TOO_SMALL The space reserved in Data field is too small. + @retval EFI_INVALID_PARAMETER If QuestionFlags is not valid. + +**/ +EFI_STATUS +EFIAPI +CreateStringOpCode ( + IN EFI_QUESTION_ID QuestionId, + IN EFI_VARSTORE_ID VarStoreId, + IN UINT16 VarOffset, + IN EFI_STRING_ID Prompt, + IN EFI_STRING_ID Help, + IN UINT8 QuestionFlags, + IN UINT8 StringFlags, + IN UINT8 MinSize, + IN UINT8 MaxSize, + IN OUT EFI_HII_UPDATE_DATA *Data + ) +; + +/** + Converts binary buffer to Unicode string in reversed byte order to BufToHexString(). + + @param Str String for output + @param Buffer Binary buffer. + @param BufferSize Size of the buffer in bytes. + + @retval EFI_SUCCESS The function completed successfully. + +**/ +EFI_STATUS +EFIAPI +BufferToHexString ( + IN OUT CHAR16 *Str, + IN UINT8 *Buffer, + IN UINTN BufferSize + ) +; + +/** + Converts Hex String to binary buffer in reversed byte order to HexStringToBuf(). + + @param Buffer Pointer to buffer that receives the data. + @param BufferSize Length in bytes of the buffer to hold converted + data. If routine return with EFI_SUCCESS, + containing length of converted data. If routine + return with EFI_BUFFER_TOO_SMALL, containg length + of buffer desired. + @param Str String to be converted from. + + @retval EFI_SUCCESS The function completed successfully. + +**/ +EFI_STATUS +EFIAPI +HexStringToBuffer ( + IN OUT UINT8 *Buffer, + IN OUT UINTN *BufferSize, + IN CHAR16 *Str + ) +; + +/** + Construct using routing information GUID/NAME/PATH. + + @param ConfigHdr Pointer to the ConfigHdr string. + @param StrBufferLen On input: Length in bytes of buffer to hold the + ConfigHdr string. Includes tailing '\0' character. + On output: If return EFI_SUCCESS, containing + length of ConfigHdr string buffer. If return + EFI_BUFFER_TOO_SMALL, containg length of string + buffer desired. + @param Guid Routing information: GUID. + @param Name Routing information: NAME. + @param DriverHandle Driver handle which contains the routing + information: PATH. + + @retval EFI_SUCCESS Routine success. + @retval EFI_BUFFER_TOO_SMALL The ConfigHdr string buffer is too small. + +**/ +EFI_STATUS +EFIAPI +ConstructConfigHdr ( + IN OUT CHAR16 *ConfigHdr, + IN OUT UINTN *StrBufferLen, + IN EFI_GUID *Guid, + IN CHAR16 *Name, OPTIONAL + IN EFI_HANDLE *DriverHandle + ) + +; + +/** + Search BlockName "&OFFSET=Offset&WIDTH=Width" in a string. + + @param String The string to be searched in. + @param Offset Offset in BlockName. + @param Width Width in BlockName. + + @retval TRUE Block name found. + @retval FALSE Block name not found. + +**/ +BOOLEAN +EFIAPI +FindBlockName ( + IN OUT CHAR16 *String, + UINTN Offset, + UINTN Width + ) +; + +/** + This routine is invoked by ConfigAccess.Callback() to retrived uncommitted data from Form Browser. + + @param VariableGuid An optional field to indicate the target variable + GUID name to use. + @param VariableName An optional field to indicate the target + human-readable variable name. + @param BufferSize On input: Length in bytes of buffer to hold + retrived data. On output: If return + EFI_BUFFER_TOO_SMALL, containg length of buffer + desired. + @param Buffer Buffer to hold retrived data. + + @retval EFI_SUCCESS Routine success. + @retval EFI_BUFFER_TOO_SMALL The intput buffer is too small. + +**/ +EFI_STATUS +EFIAPI +GetBrowserData ( + EFI_GUID *VariableGuid, OPTIONAL + CHAR16 *VariableName, OPTIONAL + UINTN *BufferSize, + UINT8 *Buffer + ) +; + +/** + This routine is invoked by ConfigAccess.Callback() to update uncommitted data of Form Browser. + + @param VariableGuid An optional field to indicate the target variable + GUID name to use. + @param VariableName An optional field to indicate the target + human-readable variable name. + @param BufferSize Length in bytes of buffer to hold retrived data. + @param Buffer Buffer to hold retrived data. + @param RequestElement An optional field to specify which part of the + buffer data will be send back to Browser. If NULL, + the whole buffer of data will be committed to + Browser. ::= + &OFFSET=&WIDTH=* + + @retval EFI_SUCCESS Routine success. + @retval Other Updating Browser uncommitted data failed. + +**/ +EFI_STATUS +EFIAPI +SetBrowserData ( + EFI_GUID *VariableGuid, OPTIONAL + CHAR16 *VariableName, OPTIONAL + UINTN BufferSize, + UINT8 *Buffer, + CHAR16 *RequestElement OPTIONAL + ) +; + +/** + Draw a dialog and return the selected key. + + @param NumberOfLines The number of lines for the dialog box + @param KeyValue The EFI_KEY value returned if HotKey is TRUE.. + @param String Pointer to the first string in the list + @param ... A series of (quantity == NumberOfLines) text + strings which will be used to construct the dialog + box + + @retval EFI_SUCCESS Displayed dialog and received user interaction + @retval EFI_INVALID_PARAMETER One of the parameters was invalid. + +**/ + +EFI_STATUS +EFIAPI +IfrLibCreatePopUp ( + IN UINTN NumberOfLines, + OUT EFI_INPUT_KEY *KeyValue, + IN CHAR16 *String, + ... + ) +; + +#endif diff --git a/MdePkg/Library/BaseLib/String.c b/MdePkg/Library/BaseLib/String.c index 94471f3329..909262e587 100644 --- a/MdePkg/Library/BaseLib/String.c +++ b/MdePkg/Library/BaseLib/String.c @@ -2073,3 +2073,242 @@ BcdToDecimal8 ( } +/** + Convert a nibble in the low 4 bits of a byte to a Unicode hexadecimal character. + + This function converts a nibble in the low 4 bits of a byte to a Unicode hexadecimal + character For example, the nibble 0x01 and 0x0A will converted to L'1' and L'A' + respectively. + + The upper nibble in the input byte will be masked off. + + @param Nibble The nibble which is in the low 4 bits of the input byte. + + @retval CHAR16 The Unicode hexadecimal character. + +**/ +CHAR16 +NibbleToHexChar ( + IN UINT8 Nibble + ) +{ + Nibble &= 0x0F; + if (Nibble <= 0x9) { + return (CHAR16)(Nibble + L'0'); + } + + return (CHAR16)(Nibble - 0xA + L'A'); +} + +/** + Convert binary buffer to a Unicode String in a specified sequence. + + This function converts bytes in the binary Buffer Buf to a Unicode String Str. + Each byte will be represented by two Unicode characters. For example, byte 0xA1 will + be converted into two Unicode character L'A' and L'1'. In the output String, the Unicode Character + for the Most Significant Nibble will be put before the Unicode Character for the Least Significant + Nibble. The output string for the buffer containing a single byte 0xA1 will be L"A1". + For a buffer with multiple bytes, the Unicode character produced by the first byte will be put into the + the last character in the output string. The one next to first byte will be put into the + character before the last character. This rules applies to the rest of the bytes. The Unicode + character by the last byte will be put into the first character in the output string. For example, + the input buffer for a 64-bits unsigned integrer 0x12345678abcdef1234 will be converted to + a Unicode string equal to L"12345678abcdef1234". + + @param String On input, String is pointed to the buffer allocated for the convertion. + @param StringLen The Length of String buffer to hold the output String. The length must include the tailing '\0' character. + The StringLen required to convert a N bytes Buffer will be a least equal to or greater + than 2*N + 1. + @param Buffer The pointer to a input buffer. + @param BufferSizeInBytes Lenth in bytes of the input buffer. + + + @retval EFI_SUCCESS The convertion is successfull. All bytes in Buffer has been convert to the corresponding + Unicode character and placed into the right place in String. + @retval EFI_BUFFER_TOO_SMALL StringSizeInBytes is smaller than 2 * N + 1the number of bytes required to + complete the convertion. +**/ +RETURN_STATUS +EFIAPI +BufToHexString ( + IN OUT CHAR16 *String, + IN OUT UINTN *StringLen, + IN CONST UINT8 *Buffer, + IN UINTN BufferSizeInBytes + ) +{ + UINTN Idx; + UINT8 Byte; + UINTN StrLen; + + // + // Make sure string is either passed or allocate enough. + // It takes 2 Unicode characters (4 bytes) to represent 1 byte of the binary buffer. + // Plus the Unicode termination character. + // + StrLen = BufferSizeInBytes * 2; + if (StrLen > ((*StringLen) - 1)) { + *StringLen = StrLen + 1; + return RETURN_BUFFER_TOO_SMALL; + } + + *StringLen = StrLen + 1; + // + // Ends the string. + // + String[StrLen] = L'\0'; + + for (Idx = 0; Idx < BufferSizeInBytes; Idx++) { + + Byte = Buffer[Idx]; + String[StrLen - 1 - Idx * 2] = NibbleToHexChar (Byte); + String[StrLen - 2 - Idx * 2] = NibbleToHexChar ((UINT8)(Byte >> 4)); + } + + return RETURN_SUCCESS; +} + + +/** + Convert a Unicode string consisting of hexadecimal characters to a output byte buffer. + + This function converts a Unicode string consisting of characters in the range of Hexadecimal + character (L'0' to L'9', L'A' to L'F' and L'a' to L'f') to a output byte buffer. The function will stop + at the first non-hexadecimal character or the NULL character. The convertion process can be + simply viewed as the reverse operations defined by BufToHexString. Two Unicode characters will be + converted into one byte. The first Unicode character represents the Most Significant Nibble and the + second Unicode character represents the Least Significant Nibble in the output byte. + The first pair of Unicode characters represents the last byte in the output buffer. The second pair of Unicode + characters represent the the byte preceding the last byte. This rule applies to the rest pairs of bytes. + The last pair represent the first byte in the output buffer. + + For example, a Unciode String L"12345678" will be converted into a buffer wil the following bytes + (first byte is the byte in the lowest memory address): "0x78, 0x56, 0x34, 0x12". + + If String has N valid hexadecimal characters for conversion, the caller must make sure Buffer is at least + N/2 (if N is even) or (N+1)/2 (if N if odd) bytes. + + @param Buffer The output buffer allocated by the caller. + @param BufferSizeInBytes On input, the size in bytes of Buffer. On output, it is updated to + contain the size of the Buffer which is actually used for the converstion. + For Unicode string with 2*N hexadecimal characters (not including the + tailing NULL character), N bytes of Buffer will be used for the output. + @param String The input hexadecimal string. + @param ConvertedStrLen The number of hexadecimal characters used to produce content in output + buffer Buffer. + + @retval RETURN_BUFFER_TOO_SMALL The input BufferSizeInBytes is too small to hold the output. BufferSizeInBytes + will be updated to the size required for the converstion. + @retval RETURN_SUCCESS The convertion is successful or the first Unicode character from String + is hexadecimal. If ConvertedStrLen is not NULL, it is updated + to the number of hexadecimal character used for the converstion. +**/ +RETURN_STATUS +EFIAPI +HexStringToBuf ( + OUT UINT8 *Buffer, + IN OUT UINTN *BufferSizeInBytes, + IN CONST CHAR16 *String, + OUT UINTN *ConvertedStrLen OPTIONAL + ) +{ + UINTN HexCnt; + UINTN Idx; + UINTN BufferLength; + UINT8 Digit; + UINT8 Byte; + + // + // Find out how many hex characters the string has. + // + for (Idx = 0, HexCnt = 0; IsHexDigit (&Digit, String[Idx]); Idx++, HexCnt++); + + if (HexCnt == 0) { + *ConvertedStrLen = 0; + return RETURN_SUCCESS; + } + // + // Two Unicode characters make up 1 buffer byte. Round up. + // + BufferLength = (HexCnt + 1) / 2; + + // + // Test if buffer is passed enough. + // + if (BufferLength > (*BufferSizeInBytes)) { + *BufferSizeInBytes = BufferLength; + return RETURN_BUFFER_TOO_SMALL; + } + + *BufferSizeInBytes = BufferLength; + + for (Idx = 0; Idx < HexCnt; Idx++) { + + IsHexDigit (&Digit, String[HexCnt - 1 - Idx]); + + // + // For odd charaters, write the lower nibble for each buffer byte, + // and for even characters, the upper nibble. + // + if ((Idx & 1) == 0) { + Byte = Digit; + } else { + Byte = Buffer[Idx / 2]; + Byte &= 0x0F; + Byte = (UINT8) (Byte | Digit << 4); + } + + Buffer[Idx / 2] = Byte; + } + + if (ConvertedStrLen != NULL) { + *ConvertedStrLen = HexCnt; + } + + return RETURN_SUCCESS; +} + + +/** + Test if a Unicode character is a hexadecimal digit. If true, the input + Unicode character is converted to a byte. + + This function tests if a Unicode character is a hexadecimal digit. If true, the input + Unicode character is converted to a byte. For example, Unicode character + L'A' will be converted to 0x0A. + + If Digit is NULL, then ASSERT. + + @retval TRUE Char is in the range of Hexadecimal number. Digit is updated + to the byte value of the number. + @retval FALSE Char is not in the range of Hexadecimal number. Digit is keep + intact. + +**/ +BOOLEAN +IsHexDigit ( + OUT UINT8 *Digit, + IN CHAR16 Char + ) +{ + ASSERT (Digit != NULL); + + if ((Char >= L'0') && (Char <= L'9')) { + *Digit = (UINT8) (Char - L'0'); + return TRUE; + } + + if ((Char >= L'A') && (Char <= L'F')) { + *Digit = (UINT8) (Char - L'A' + 0x0A); + return TRUE; + } + + if ((Char >= L'a') && (Char <= L'f')) { + *Digit = (UINT8) (Char - L'a' + 0x0A); + return TRUE; + } + + return FALSE; +} + + diff --git a/MdePkg/Library/IfrSupportLib/IfrSupportLib.inf b/MdePkg/Library/IfrSupportLib/IfrSupportLib.inf index a8d5df4c95..98ac18c07c 100644 --- a/MdePkg/Library/IfrSupportLib/IfrSupportLib.inf +++ b/MdePkg/Library/IfrSupportLib/IfrSupportLib.inf @@ -38,8 +38,6 @@ UefiIfrForm.c UefiIfrLibraryInternal.h UefiIfrOpCodeCreation.c - R8Lib.h - R8Lib.c [Packages] @@ -71,4 +69,3 @@ [Pcd] gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultPlatformLang - \ No newline at end of file diff --git a/MdePkg/Library/IfrSupportLib/UefiIfrForm.c b/MdePkg/Library/IfrSupportLib/UefiIfrForm.c index e630e3e39d..8963789423 100644 --- a/MdePkg/Library/IfrSupportLib/UefiIfrForm.c +++ b/MdePkg/Library/IfrSupportLib/UefiIfrForm.c @@ -27,55 +27,6 @@ Abstract: // UINT16 mFakeConfigHdr[] = L"GUID=00000000000000000000000000000000&NAME=0000&PATH=0"; -#if 0 -STATIC -EFI_STATUS -GetPackageDataFromPackageList ( - IN EFI_HII_PACKAGE_LIST_HEADER *HiiPackageList, - IN UINT32 PackageIndex, - OUT UINT32 *BufferLen, - OUT EFI_HII_PACKAGE_HEADER **Buffer - ) -{ - UINT32 Index; - EFI_HII_PACKAGE_HEADER *Package; - UINT32 Offset; - UINT32 PackageListLength; - EFI_HII_PACKAGE_HEADER PackageHeader = {0, 0}; - - ASSERT(HiiPackageList != NULL); - - if ((BufferLen == NULL) || (Buffer == NULL)) { - return EFI_INVALID_PARAMETER; - } - - Package = NULL; - Index = 0; - Offset = sizeof (EFI_HII_PACKAGE_LIST_HEADER); - CopyMem (&PackageListLength, &HiiPackageList->PackageLength, sizeof (UINT32)); - while (Offset < PackageListLength) { - Package = (EFI_HII_PACKAGE_HEADER *) (((UINT8 *) HiiPackageList) + Offset); - CopyMem (&PackageHeader, Package, sizeof (EFI_HII_PACKAGE_HEADER)); - if (Index == PackageIndex) { - break; - } - Offset += PackageHeader.Length; - Index++; - } - if (Offset >= PackageListLength) { - // - // no package found in this Package List - // - return EFI_NOT_FOUND; - } - - *BufferLen = PackageHeader.Length; - *Buffer = Package; - return EFI_SUCCESS; -} -#endif - - /** Draw a dialog and return the selected key. @@ -301,7 +252,7 @@ SwapBuffer ( /** - Converts binary buffer to Unicode string in reversed byte order from R8_BufToHexString(). + Converts binary buffer to Unicode string in reversed byte order from BufToHexString(). @param Str String for output @param Buffer Binary buffer. @@ -326,7 +277,7 @@ BufferToHexString ( SwapBuffer (NewBuffer, BufferSize); StrBufferLen = (BufferSize + 1) * sizeof (CHAR16); - Status = R8_BufToHexString (Str, &StrBufferLen, NewBuffer, BufferSize); + Status = BufToHexString (Str, &StrBufferLen, NewBuffer, BufferSize); gBS->FreePool (NewBuffer); @@ -335,7 +286,7 @@ BufferToHexString ( /** - Converts Hex String to binary buffer in reversed byte order from R8_HexStringToBuf(). + Converts Hex String to binary buffer in reversed byte order from HexStringToBuf(). @param Buffer Pointer to buffer that receives the data. @param BufferSize Length in bytes of the buffer to hold converted @@ -360,7 +311,7 @@ HexStringToBuffer ( UINTN ConvertedStrLen; ConvertedStrLen = 0; - Status = R8_HexStringToBuf (Buffer, BufferSize, Str, &ConvertedStrLen); + Status = HexStringToBuf (Buffer, BufferSize, Str, &ConvertedStrLen); if (!EFI_ERROR (Status)) { SwapBuffer (Buffer, ConvertedStrLen); } @@ -496,7 +447,7 @@ FindBlockName ( Data = 0; BufferSize = sizeof (UINTN); - Status = R8_HexStringToBuf ((UINT8 *) &Data, &BufferSize, String, &ConvertedStrLen); + Status = HexStringToBuf ((UINT8 *) &Data, &BufferSize, String, &ConvertedStrLen); if (EFI_ERROR (Status)) { return FALSE; } @@ -513,7 +464,7 @@ FindBlockName ( Data = 0; BufferSize = sizeof (UINTN); - Status = R8_HexStringToBuf ((UINT8 *) &Data, &BufferSize, String, &ConvertedStrLen); + Status = HexStringToBuf ((UINT8 *) &Data, &BufferSize, String, &ConvertedStrLen); if (EFI_ERROR (Status)) { return FALSE; } @@ -710,7 +661,7 @@ SetBrowserData ( // StringPtr = BlockName + 16; BufferLen = sizeof (BlockName) - (16 * sizeof (CHAR16)); - R8_BufToHexString (StringPtr, &BufferLen, (UINT8 *) &BufferSize, sizeof (UINTN)); + BufToHexString (StringPtr, &BufferLen, (UINT8 *) &BufferSize, sizeof (UINTN)); Request = BlockName; } else { diff --git a/MdePkg/Library/IfrSupportLib/UefiIfrLibraryInternal.h b/MdePkg/Library/IfrSupportLib/UefiIfrLibraryInternal.h index dd41c7aea3..dade8592f5 100644 --- a/MdePkg/Library/IfrSupportLib/UefiIfrLibraryInternal.h +++ b/MdePkg/Library/IfrSupportLib/UefiIfrLibraryInternal.h @@ -40,8 +40,4 @@ Abstract: #include #include -//#include - -#include "R8Lib.h" - #endif