Fix missing include header file and fix typo in comment.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@5111 6f19259b-4bc3-4df7-8a09-765794883524

IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaIo.c

@@ -85,7 +85,7 @@ static EFI_ISA_DMA_REGISTERS  DmaRegisters[8] = {
 
   @param Code         - The error status code.
   
-  @Return EFI_SUCCESS  - Success to report status code.
+  @return EFI_SUCCESS  - Success to report status code.
 **/
 EFI_STATUS
 ReportErrorStatusCode (
@@ -204,10 +204,10 @@ IsaIoIoRead (
   @param Count                 - The number of I/O operations to perform. 
   @param Buffer                - The source buffer to write data from
 
-  @Retval EFI_SUCCESS           - The data was writen to the device sucessfully.
-  @Retval EFI_UNSUPPORTED       - The Offset is not valid for this device.
-  @Retval EFI_INVALID_PARAMETER - Width or Count, or both, were invalid.
-  @Retval EFI_OUT_OF_RESOURCES  - The request could not be completed due to a lack of resources.
+  @retval EFI_SUCCESS           - The data was writen to the device sucessfully.
+  @retval EFI_UNSUPPORTED       - The Offset is not valid for this device.
+  @retval EFI_INVALID_PARAMETER - Width or Count, or both, were invalid.
+  @retval EFI_OUT_OF_RESOURCES  - The request could not be completed due to a lack of resources.
 
 **/
 EFI_STATUS

IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppy.c

@@ -361,7 +361,7 @@ Done:
   created by this driver.
 
   @param  This              Protocol instance pointer.
-  @param  ControllerHandle  Handle of device to stop driver on
+  @param  Controller        Handle of device to stop driver on
   @param  NumberOfChildren  Number of Handles in ChildHandleBuffer. If number of
                             children is zero stop the entire bus driver.
   @param  ChildHandleBuffer List of Child Handles to Stop.

IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppy.h

@@ -534,7 +534,7 @@ FdcControllerDriverStart (
   created by this driver.
 
   @param  This              Protocol instance pointer.
-  @param  ControllerHandle  Handle of device to stop driver on
+  @param  Controller        Handle of device to stop driver on
   @param  NumberOfChildren  Number of Handles in ChildHandleBuffer. If number of
                             children is zero stop the entire bus driver.
   @param  ChildHandleBuffer List of Child Handles to Stop.
@@ -759,7 +759,7 @@ DisketChanged (
   and the initial values for each of the three internal
   times: HUT, SRT and HLT
   
-  @param This    Pointer to instance of FDC_BLK_IO_DEV
+  @param FdcDev    Pointer to instance of FDC_BLK_IO_DEV
   
   @retval  EFI_SUCCESS:    Execute the Specify command successfully
   @retval  EFI_DEVICE_ERROR: Fail to execute the command
@@ -806,7 +806,7 @@ Seek (
   Do the Sense Interrupt Status command, this command
   resets the interrupt signal
   
-  
+  @param  FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
   @param  StatusRegister0 UINT8 *: Be used to save Status Register 0 read from FDC
   @param  PresentCylinderNumber  UINT8 *: Be used to save present cylinder number
                                     read from FDC
@@ -947,7 +947,7 @@ DataOutByte (
   Detect the specified floppy logic drive is busy or
   not within a period of time
   
-  @param Disk             Indicate it is drive A or drive B
+  @param FdcDev          Indicate it is drive A or drive B
   @param TimeoutInSeconds the time period for waiting
   
   @retval EFI_SUCCESS:  The drive and command are not busy
@@ -989,10 +989,10 @@ FddDRQReady (
   @param Result  Point to result structure
   @param FdcDev  FDC control structure
 
-  @param EFI_DEVICE_ERROR - GC_TODO: Add description for return value
-  @param EFI_DEVICE_ERROR - GC_TODO: Add description for return value
-  @param EFI_DEVICE_ERROR - GC_TODO: Add description for return value
-  @param EFI_SUCCESS - GC_TODO: Add description for return value
+  @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
+  @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
+  @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
+  @retval EFI_SUCCESS - GC_TODO: Add description for return value
 
 **/
 EFI_STATUS
@@ -1072,7 +1072,8 @@ FdcReadPort (
  
   @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
   @param Offset The offset address of port
-
+  @param Data   Value written to port
+  
 **/
 VOID
 FdcWritePort (
@@ -1090,7 +1091,7 @@ FdcWritePort (
   @param LBA      The starting logic block address to read from on the device
   @param BufferSize The size of the Buffer in bytes
   @param Operation   - GC_TODO: add argument description
-  Buffer      - GC_TODO: add argument description
+  @param Buffer      - GC_TODO: add argument description
 
   @retval EFI_INVALID_PARAMETER - GC_TODO: Add description for return value
   @retval EFI_SUCCESS - GC_TODO: Add description for return value
@@ -1122,7 +1123,7 @@ FddReadWriteBlocks (
 /**
   Common interface for free cache 
   
-  @param FdcDec  Pointer of FDC_BLK_IO_DEV instance
+  @param FdcDev  Pointer of FDC_BLK_IO_DEV instance
   
 **/
 VOID

IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyBlock.c

@@ -191,7 +191,7 @@ FddWriteBlocks (
   @param LBA      The starting logic block address to read from on the device
   @param BufferSize The size of the Buffer in bytes
   @param Operation   - GC_TODO: add argument description
-  Buffer      - GC_TODO: add argument description
+  @param Buffer      - GC_TODO: add argument description
 
   @retval EFI_INVALID_PARAMETER - GC_TODO: Add description for return value
   @retval EFI_SUCCESS - GC_TODO: Add description for return value
@@ -384,7 +384,7 @@ FddReadWriteBlocks (
 /**
   Common interface for free cache 
   
-  @param FdcDec  Pointer of FDC_BLK_IO_DEV instance
+  @param FdcDev  Pointer of FDC_BLK_IO_DEV instance
   
 **/
 VOID

IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyCtrl.c

@@ -408,7 +408,7 @@ DisketChanged (
   and the initial values for each of the three internal
   times: HUT, SRT and HLT
   
-  @param This    Pointer to instance of FDC_BLK_IO_DEV
+  @param FdcDev    Pointer to instance of FDC_BLK_IO_DEV
   
   @retval  EFI_SUCCESS:    Execute the Specify command successfully
   @retval  EFI_DEVICE_ERROR: Fail to execute the command
@@ -627,7 +627,7 @@ Seek (
   Do the Sense Interrupt Status command, this command
   resets the interrupt signal
   
-  
+  @param  FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
   @param  StatusRegister0 UINT8 *: Be used to save Status Register 0 read from FDC
   @param  PresentCylinderNumber  UINT8 *: Be used to save present cylinder number
                                     read from FDC
@@ -1111,7 +1111,7 @@ DataOutByte (
   Detect the specified floppy logic drive is busy or
   not within a period of time
   
-  @param Disk             Indicate it is drive A or drive B
+  @param FdcDev           Indicate it is drive A or drive B
   @param TimeoutInSeconds the time period for waiting
   
   @retval EFI_SUCCESS:  The drive and command are not busy
@@ -1232,10 +1232,10 @@ FddDRQReady (
   @param Result  Point to result structure
   @param FdcDev  FDC control structure
 
-  @param EFI_DEVICE_ERROR - GC_TODO: Add description for return value
-  @param EFI_DEVICE_ERROR - GC_TODO: Add description for return value
-  @param EFI_DEVICE_ERROR - GC_TODO: Add description for return value
-  @param EFI_SUCCESS - GC_TODO: Add description for return value
+  @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
+  @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
+  @retval EFI_DEVICE_ERROR - GC_TODO: Add description for return value
+  @retval EFI_SUCCESS - GC_TODO: Add description for return value
 
 **/
 EFI_STATUS
@@ -1407,7 +1407,8 @@ FdcReadPort (
  
   @param FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
   @param Offset The offset address of port
-
+  @param Data   Value written to port
+  
 **/
 VOID
 FdcWritePort (

IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/Serial.c

@@ -520,7 +520,7 @@ Error:
   @param  This                - A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
   @param  Controller          - The handle of the controller to test.
   @param  NumberOfChildren    - Number of child device.
-  @param  RemainingDevicePath - A pointer to the remaining portion of a device path.
+  @param  ChildHandleBuffer   - A pointer to the remaining portion of a device path.
 
   @retval EFI_SUCCESS         - Operation successfully
   @retval EFI_DEVICE_ERROR    - Cannot stop the driver successfully

IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KbdCtrller.c

@@ -2008,7 +2008,7 @@ DisableKeyboard (
   If Keyboard receives 0xF4, it will respond with 'ACK'. If it doesn't respond, the device
   should not be in system.
 
-  @param[in]  BiosKeyboardPrivate   Keyboard Private Data Structure
+  @param[in]  ConsoleIn             Keyboard Private Data Structure
 
   @retval     TRUE                  Keyboard in System.
   @retval     FALSE                 Keyboard not in System.

IntelFrameworkModulePkg/Universal/SectionExtractionDxe/SectionExtraction.c

@@ -1299,7 +1299,7 @@ IsValidSectionStream (
 
   @param SignalFlag      -  Boolean value to decide whether kick the event after register or not.
 
-  @Return  The EFI_EVENT that has been registered to be signaled when a ProtocolGuid
+  @return  The EFI_EVENT that has been registered to be signaled when a ProtocolGuid
            is added to the system.
 
 **/

IntelFrameworkModulePkg/Universal/VariablePei/Variable.c

@@ -73,7 +73,7 @@ PeimInitializeVariableServices (
 
   @param VarStoreHeader        Pointer to the Variable Store Header.
 
-  @Return VARIABLE_HEADER*      Pointer to last unavailable Variable Header
+  @return VARIABLE_HEADER*      Pointer to last unavailable Variable Header
 
 **/
 VARIABLE_HEADER *
@@ -92,7 +92,7 @@ GetStartPointer (
 
   @param VarStoreHeader        Pointer to the Variable Store Header.
 
-  @Return  VARIABLE_HEADER*      Pointer to last unavailable Variable Header
+  @return  VARIABLE_HEADER*      Pointer to last unavailable Variable Header
 
 **/
 VARIABLE_HEADER *
@@ -136,7 +136,7 @@ IsValidVariableHeader (
 
   @param Variable            Pointer to the Variable Header.
 
-  @Return UINTN               Size of variable in bytes
+  @return UINTN               Size of variable in bytes
 
 **/
 UINTN
@@ -158,7 +158,7 @@ NameSizeOfVariable (
 
   @param Variable            Pointer to the Variable Header.
 
-  @Return  UINTN               Size of variable in bytes
+  @return  UINTN               Size of variable in bytes
 
 **/
 UINTN
@@ -180,7 +180,7 @@ DataSizeOfVariable (
 
   @param Variable            Pointer to the Variable Header.
 
-  @Return CHAR16*              Pointer to Variable Name
+  @return CHAR16*              Pointer to Variable Name
 
 **/
 CHAR16 *
@@ -198,7 +198,7 @@ GetVariableNamePtr (
 
   @param Variable            Pointer to the Variable Header.
 
-  @Return  UINT8*              Pointer to Variable Data
+  @return  UINT8*              Pointer to Variable Data
 
 **/
 UINT8 *
@@ -223,7 +223,7 @@ GetVariableDataPtr (
 
   @param Variable              Pointer to the Variable Header.
 
-  @Return VARIABLE_HEADER*      Pointer to next variable header.
+  @return VARIABLE_HEADER*      Pointer to next variable header.
 
 **/
 VARIABLE_HEADER *
@@ -295,7 +295,7 @@ GetVariableStoreStatus (
   @param PtrTrack       - Variable Track Pointer structure that contains
                    Variable Information.
 
-  @Retval  EFI_SUCCESS    - Found match variable
+  @retval  EFI_SUCCESS    - Found match variable
   @retval EFI_NOT_FOUND  - Variable not found
 
 **/