BaseTools has been duplicating and adapting code that is defined in
MdePkg and MdeModulePkg. This leads to desync issues where the same
symbols may be backed by different functions with slightly different
semantics and also fixes that apply only to BaseTools or only to MdePkg
and MdeModulePkg.
To address these issues, update BaseTools/Source/C to utilize the code
from MdePkg and MdeModulePkg.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
BaseTools has been duplicating and adapting code that is defined in
MdePkg and MdeModulePkg. This leads to desync issues where the same
symbols may be backed by different functions with slightly different
semantics and also fixes that apply only to BaseTools or only to MdePkg
and MdeModulePkg.
To address these issues, update BaseTools/Source/C to utilize the code
from MdePkg and MdeModulePkg.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Update the brotli submodule to the latest commit (ed1995b6bda1)
so that the build isn't broken in GCC 12 compilers.
Signed-off-by: Savva Mitrofanov <savvamtr@gmail.com>
When converting ELF to PE/COFF for the AArch64 target, we may encounter
an R_AARCH64_ADR_GOT_PAGE relocation that refers to an ADR instruction
instead of an ADRP instruction. This can happen when the toolchain is
working around Cortex-A53 erratum #843419. If that's the case, be sure
to calculate the offset appropriately.
This resolves an issue experienced when building a StandaloneMm image
(which is built with -fpie) with stack protection enabled on GCC
compiled with "--enable-fix-cortex-a53-843419". In this case, the linker
may convert an ADRP instruction appearing at an offset of 0xff8 or 0xffc
modulo 4KiB into an ADR instruction, but will leave the original
R_AARCH64_ADR_GOT_PAGE relocation in place. (This is not a bug in the
linker, given that there is no other relocation type that it could
reasonably convert it into)
In this scenario, the following code is being generated by the
toolchain:
# Load to set the stack canary
2ffc: 10028020 adr x0, 8000 <mErrorString+0x1bc>
3008: f940d400 ldr x0, [x0, #424]
# Load to check the stack canary
30cc: b0000020 adrp x0, 8000 <mErrorString+0x1bc>
30d0: f940d400 ldr x0, [x0, #424]
GenFw rewrote that to:
# Load to set the stack canary
2ffc: 10000480 adr x0, 0x308c
3008: 912ec000 add x0, x0, #0xbb0
# Load to check the stack canary
30cc: f0000460 adrp x0, 0x92000
30d0: 912ec000 add x0, x0, #0xbb0
Note that we're now setting the stack canary from the wrong address,
resulting in an erroneous stack fault.
After this fix, the offset will be calculated correctly for an ADR and
the stack canary is set correctly. Note that there is a corner case
where this may cause the conversion to fail: if the original GOT entry
is just within -/+ 1 MiB of the reference, but the actual variable it
refers to is not, the resulting offset cannot be represented by the
immediate offset field in a ADR instruction. Given that this issue only
affects PIE executables, which are rare and usually tiny, this is
unlikely to cause problems in practice.
Ref: https://edk2.groups.io/g/devel/topic/102202314
[ardb: expand commit log, add reference]
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Automatically set the nxcompat flag in the DLL Characteristics field of
the Optional Header of the PE32+ image. For this flag to be set
automatically, the section alignment must be evenly divisible
by 4K (EFI_PAGE_SIZE) and no section must be executable and writable.
Adds a command line flag to GenFw, --nonxcompat, to ensure the
IMAGE_DLLCHARACTERISTICS_NX_COMPAT bit is not set, even if all
requirements are met. Updates the manual for GenFw to include the new
flag.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Joey Vagedes <joeyvagedes@gmail.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Correct relax id from 99 to 100 and added relocation support up to 109
fix gcc14 adds new relocation, and the generated relocation
causes the build and compilation to fail.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4559
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Chao Li <lichao@loongson.cn>
Signed-off-by: Dongyan Qian <qiandongyan@loongson.cn>
Reviewed-by: Chao Li <lichao@loongson.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4494
Today for SEC core(not VTF-0), GenFv finds free 4K aligned space in
FV for AP waking vector and JMP to 4G-30h in the waking vector.
There is no usage of this today. Remove the logic to avoid confusing
and save spaces in reset vector.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Use the MdePkg versions instead of maintaining a copy in BaseTools.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Use the MdePkg version instead of maintaining a copy in BaseTools.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Use the newer versions of the machine #defines.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
The #define for IMAGE_FILE_MACHINE_ARM is not present in MdePkg,
this looks like a relic not used any more. Remove.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Use the MdePkg version instead of maintaining a copy in BaseTools.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Use the MdePkg version instead of maintaining a copy in BaseTools.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Appears to be a relic for ancient windows / compiler versions,
windows builds in CI work just fine without it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
threading.currentThread is a deprecated alias for
threading.current_thread, and causes a warning to be displayed when it's
called. Update NmakeSubdirs.py to use the latter method instead.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4405
The PE/COFF spec describes an additional DllCharacteristics field
implemented as a debug directory entry, which carries flags related to
which control flow integrity (CFI) features are supported by the binary.
So let's add this entry when doing ELF to PE/COFF conversion - we will
add support for setting the flags in a subsequent patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4405
When performing ELF to PE/COFF conversion, parse any notes sections to
decide whether the image supports forward CFI landing pads. This will be
used to set the associated DllCharacteristicsEx flag in a subsequent
patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Update the antlr makefile to remove the explicit setting of CC to either
clang or gcc. This causes it to use /usr/bin/cc or whatever the user has
set $(CC) to.
This removes the last dependency on gcc for BaseTools.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
clang 17 defaults to C++17, where the 'register' keyword is deprecated
and the warning changed to an error. To avoid build errors, compile
against C++14 by specifying '-std=c++14' in CXXFLAGS.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
In https://bugzilla.tianocore.org/show_bug.cgi?id=2842 clang support was
added by having users specify "make CXX=llvm" when building BaseTools.
The Makefile then sees that and sets CC=$(CLANG_BIN)clang and
CXX=$(CLANG_BIN)clang++. That requires that the executables 'clang' and
'clang++' exist and for example aren't named 'clang-17' and
'clang++-17'. Also, it's an unusual way of specifying the compiler,
since many users will expect to be able to override CC and CXX on the
make command line.
Rework the BaseTools Makefiles removing the 'BUILD_' prefix (BUILD_CC
and BUILD_CXX) and using the standard name 'LDFLAGS' instead of
'LFLAGS'. This allows clang to be used by running
'make -C BaseTools CC=clang CXX=clang++'.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
In https://bugzilla.tianocore.org/show_bug.cgi?id=2842 clang support was
added by having users specify "make CXX=llvm" when building BaseTools.
The Makefile then sees that and sets CC=$(CLANG_BIN)clang and
CXX=$(CLANG_BIN)clang++. That requires that the executables 'clang' and
'clang++' exist and for example aren't named 'clang-17' and
'clang++-17'. Also, it's an unusual way of specifying the compiler,
since many users will expect to be able to override CC and CXX on the
make command line.
Rework the BaseTools Makefiles removing the 'BUILD_' prefix (BUILD_CC
and BUILD_CXX) and using the standard name 'LDFLAGS' instead of
'LFLAGS'. This allows clang to be used by running
'make -C BaseTools CC=clang CXX=clang++'.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
While more portable methods exist to handle these cases, this change
does not attempt to do more than fix the immediate problem and
follow the conventions already established in this code.
`snprintf()` is introduced as the minimum improvement apart from
making the buffers larger.
Fixes the following CodeQL alerts:
1. Failure on line 2339 in
BaseTools/Source/C/VfrCompile/Pccts/antlr/gen.c
- Type: Potentially overrunning write
- Severity: Critical
- Problem: This 'call to sprintf' operation requires 17 bytes but
the destination is only 16 bytes.
2. Failure on line 2341 in
BaseTools/Source/C/VfrCompile/Pccts/antlr/gen.c
- Type: Potentially overrunning write
- Severity: Critical
- Problem: This 'call to sprintf' operation requires 17 bytes but
the destination is only 16 bytes.
3. Failure on line 1309 in
BaseTools/Source/C/VfrCompile/Pccts/antlr/main.c
- Type: Potentially overrunning write
- Severity: Critical
- Problem: This 'call to sprintf' operation requires 25 bytes but
the destination is only 20 bytes.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
Replace the duplicate __PcdSet prototype in PcdValueCommon.h
with the prototype for __PcdGet.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Move the documentation blocks from between the parameter list and function
body to above the function.
Convert all the documentation blocks to Doxygen format.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
When checking the version in DevicePath's Makefile, use BUILD_CC instead
of assuming "gcc". BUILD_CC is set in header.makefile and is the
compiler that will actually be used to build DevicePath. It defaults to
"gcc", but may be overridden.
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Fixes issues found with the cpp/wrong-type-format-argument CodeQL
rule in BaseTools.
Reference:
https://cwe.mitre.org/data/definitions/686.html
The following CodeQL errors are resolved:
1. Check failure on line 1115 in
BaseTools/Source/C/EfiRom/EfiRom.c
- This argument should be of type 'int' but is of type 'char *'.
- This argument should be of type 'int' but is of type 'signed
char *'.
2. Check failure on line 359 in
BaseTools/Source/C/GenFw/Elf32Convert.c
- This argument should be of type 'CHAR8 *' but is of type
'unsigned int'.
3. Check failure on line 1841 in
BaseTools/Source/C/GenFw/Elf64Convert.c
- This argument should be of type 'unsigned int' but is of type
'unsigned long long'.
4. Check failure on line 1871 in
BaseTools/Source/C/GenFw/Elf64Convert.c
- This argument should be of type 'unsigned int' but is of type
'unsigned long long'.
5. Check failure on line 2400 in
BaseTools/Source/C/GenFv/GenFvInternalLib.c
- This argument should be of type 'unsigned long long' but is of
type 'unsigned int'.
6. Check failure on line 1099 in
BaseTools/Source/C/GenFw/Elf64Convert.c
- This argument should be of type 'CHAR8 *' but is of type
'unsigned int'.
7. Check failure on line 1098 in
BaseTools/Source/C/GenSec/GenSec.c
- This argument should be of type 'CHAR8 *' but is of type
'char **'.
8. Check failure on line 911 in
BaseTools/Source/C/GenSec/GenSec.c
- This argument should be of type 'CHAR8 *' but is of type
'char **'.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4139
Update ms.common and *.mak files to use /Z7 instead of /Zi to embed
symbol information in obj files for host tools built with VS compilers.
This prevents vcxxx.pdb files from being generated in the root of
the local edk2 repository or in BaseTools directories.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
If operation Werro is turned on when compiling BaseTools, the
multi-brackets warning will be reported. This issue is comes from on of
the LoongArch enabled patche. Removed extra pairs brackets to fix it.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4111
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4053
C code changes for building EDK2 LoongArch platform.
For definitions of PE/COFF and LOONGARCH relocation types, see the
"Machine Types" and "Basic Relocation Types" sections of this URL for
LOONGARCH values:
https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Dongyan Qian <qiandongyan@loongson.cn>
Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Co-authored-by: Yang Zhou <zhouyang@loongson.cn>
Co-authored-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
