Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Add APRIORI file to allow status code related DXE drivers to
be dispatched earlier so that debug message can also be seen
much earlier. With this, lots of DXE driver debug message will
be missing.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
The current CorebootPayloadPkg will use the legacy 8254 timer
driver as the default. However, on some platforms legacy timer
might not exist anymore. This patch adds HPET timer driver as
a build option.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by : Prince Agyeman <prince.agyeman@intel.com>
The current CorebootPayloadPkg will print the following message
"InsertImageRecord - Section Alignment(0x20) is not 4K" during
boot. It is caused by the section alignment arranged by the linker.
This patch change the alignment to 4K for runtime drivers.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
The current CorebootPayloadPkg uses PEI/DXE StatusCode drivers from
IntelFrameworkModulePkg. This patch switches to use the StatusCode
driver from MdeModulePkg instead.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Section alignment of .data in GCC49 and GCC5 are 0x40
rather than 0x20 in GCC48 and below.
This causes a hang in PeiCore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Prince Agyeman <prince.agyeman@intel.com>
Reviewed by: Maurice Ma <maurice.ma@intel.com>
Current CorebootPayloadPkg uses PciBusNoEnumerationDxe and
PciRootBridgenoEnumerationDxe copied from the DuetPkg. Now it will
switch to use the standard PciBusDxe and PciHostBridgeDxe from
MdeModulePkg. As a result, a coreboot specific PciHostBridgeLib
is added to collect pre-allocated PCI resources.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Switch over to use BdxDxe generic driver in MdeModulePkg.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Use generic SerialDxe driver in MdeModulePkg instead of the one
in CorebootModulePkg. By doing this the reference for
PciSioSerialDxe driver will also be removed from DSC and FDF file.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Add the USB OHCI driver from revision 24ca2f35 of QuarkSocPkg.
Change-Id: Ie7aa0bc47d4ff06adc57976a5efb0e40ce4e1673
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Add SD and eMMC DXE driver support to CorebootPayloadPkg.
Change-Id: Ibfd3a2cc32a653ce51e38d9157ea3c6da25a5474
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Convert to using DOS line endings.
Change-Id: Ie2f148867d9b2b386d556583afb6716ec21399e9
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Use the serial drivers which update the serial PCDs from
PlatformHookLib.
Change-Id: Ie6a3526d56332ee1cf07edb24ff39634a981183f
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Add all of the shell options from ShellBinPkg including building the
shell from source.
Enable link time optimization for GCC debug builds to keep the size
under 0x3e0000.
Test: Use -DSHELL_TYPE=BUILD_SHELL command line options to build the
shell from source. Run the result on Galileo Gen2.
Change-Id: I1e12adb57960ac5e75e682073540a9322aa03081
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Remove the references to DuetPkg. Copy the files from revision
ffea0a2ce2 of DuetPkg into
CorebootModulePkg. The components include:
* PciBusNoEnumerationDxe
* PciRootBridgeNoEnumerationDxe
* SataControllerDxe
TEST=Build and run on Galileo Gen2
Change-Id: Id07185f7e226749e5f7c6b6cb427bcef7eac8496
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Remove trailing white space from existing .dsc and .fdf files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Note: Build tested with GCC 5.3 on IA32 and IA32+X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
1. Update fdf and dsc to use SerialDxe in MdeModulePkg.
2. Separate the code that gets SerialRegBase and SerialRegAccessType
by CbParseLib from CorebootPayloadPkg/Library/SerialPortLib to
PlatformHookLib, and then leverage BaseSerialPortLib16550 in
MdeModulePkg.
3. Remove CorebootPayloadPkg/SerialDxe and
CorebootPayloadPkg/Library/SerialPortLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18968 6f19259b-4bc3-4df7-8a09-765794883524
Current CorebootPayloadPkg uses PciHostBridge and PciBusNoEnumeration
driver. It will cause the PCI bus resource incorrectly set in root
bridge instance. As a result all PCI devices behind a PCI bridge will
not show up in Shell 'PCI' command.
To resolve it use PciRootBridgeNoEnumeration driver instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17408 6f19259b-4bc3-4df7-8a09-765794883524
Increase payload size limit to accomodate large binaries, such as those
produced by Microsoft NOOPT builds and gcc DEBUG builds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17148 6f19259b-4bc3-4df7-8a09-765794883524
Initial coreboot UEFI payload code check in. It provides UEFI services on top of coreboot that allows UEFI OS boot.
CorebootPayloadPkg is source code package of coreboot Payload Modules, Provides definitions of payload image's layout and lists the modules required in DSC file.
It supports the following features:
- Support Unified Extensible Firmware Interface (UEFI) specification 2.4.
- Support Platform Initialization(PI) specification 1.3.
- Support execution as a coreboot payload.
- Support USB 3.0
- Support SATA/ATA devices.
- Support EFI aware OS boot.
The following features are not supported currently and have not been validated:
- GCC Tool Chains
- SMM Execution Environment
- Security Boot
It was tested on a Intel Bay Trail CRB platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17081 6f19259b-4bc3-4df7-8a09-765794883524
Ruiyu Ni
Maurice Ma
Prince Agyeman
Leahy, Leroy P
Justen, Jordan L
Star Zeng
Scott Duplichan