PEI variable implementation checks only the variable header signature for validity. This does not seem robust if system crash occurred during previous Reclaim() operation. If the crash occurred while FTW was rewriting the variable FV, the signature could be valid even though the rest of the FV isn't valid.
Solution: Add a FaultTolerantWritePei driver to check and provide the FTW last write status, then PEI variable and early phase(before FTW protocol ready) of DXE variable can check the status and determine if all or partial variable data has been backed up in spare block, and then use the backed up data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14454 6f19259b-4bc3-4df7-8a09-765794883524
Add code in BdsDxe driver to call the protocol to mark the read-only variables defined in the UEFI Spec.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14372 6f19259b-4bc3-4df7-8a09-765794883524
First Version, goal:
1.Display Engine has the framework.
2.Browser core ready.(PasswordCheck, ValidateQuestionV not ready)
Signed-off-by: Eric Dong
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14281 6f19259b-4bc3-4df7-8a09-765794883524
VariableNameSize is the returned buffer size. GetNextVariable should behavior correct if it is bigger than SMM communication buffer or less than string size of VariableName.
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by : Dong Guo <guo.dong@intel.com>
Reviewed-by : Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by : Zeng Star <star.zeng@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14258 6f19259b-4bc3-4df7-8a09-765794883524
2. Fix the driver binding Stop() hang issue in the network stack.
3. Add Ip4 raw data support.
4. Add iSCSI Dhcp option 60 support.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13995 6f19259b-4bc3-4df7-8a09-765794883524
2. Retrieve the IP information after iSCSI TCPv6 connection established and fill it into iBFT table.
3. Generate a random IAID for each NIC port to require different IPv6 address in PXE driver.
4. Update function EfiMtftp6Configure() and Mtftp6RrqHandleOack() to allocate at most one UdpIo.
5. Fix a typo from “destory” to “destroy” in network code.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13859 6f19259b-4bc3-4df7-8a09-765794883524
2. Update Capsule modules to consume debug agent library to support source debugging in x64 code.
3. Update BootScriptExecutorDxe module to support source debugging on S3 path.
signed-off-by: Jeff Fan <jeff.fan@intel.com>
reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13680 6f19259b-4bc3-4df7-8a09-765794883524
1. Update SecurityManagementLib to support SAP2 and SAP services.
2. Update SecurityStub driver to produce SAP2 and SAP protocol both.
3. Update DxeCore and SmmCore to use SAP2 and SAP service to verify Image.
4. Update DxeCore ConnectController() to use SAP2 service to check user permission.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Guo Dong <dong.guo@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13660 6f19259b-4bc3-4df7-8a09-765794883524
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13292 6f19259b-4bc3-4df7-8a09-765794883524
2. Updated DXE Core, BootScriptExecutorDxe and CapsuleX64Pei to consume CPU Exception Library to setup the default CPU Exception handlers.
Signed-off-by: vanjeff
Reviewed-by: jyao1
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13097 6f19259b-4bc3-4df7-8a09-765794883524
Debug Print Error level can be controled by an EFI variable. Update the DXE version of the library to use a HOB if the variable services are not yet availilbe. This allows the variable to be used early in the DXE phase.
approved-by: andrewfish
reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12516 6f19259b-4bc3-4df7-8a09-765794883524
0. Remove the unused private GUID from module source files.
1. Use gEfiCallerIdGuid replace of the private module GUID.
2. Add the public header files to define HII FormSet and PackageList GUID used in every HII driver.
3. Move two EBC protocols for debug purpose from EBC driver to MdeModulePkg Include directory.
Signed-off-by: lgao4
Reviewed-by: ydong10 gdong1 tye jfan12 wli12 rsun3 jyao1
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12373 6f19259b-4bc3-4df7-8a09-765794883524
2. Introduce SmmCorePlatformHookLib library class defining two platform hook points. Update PI Smm Core to call the hook points before and after invoking registered SMI handlers. A NULL instance of this library class is implemented.
Note that after this check in, DSC files consuming the PiSmmCore.inf need to be updated to add a library instance for SmmCorePlatformHookLib library class.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12140 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng
Feng Tian
lzeng14
niruiyu
ydong10
czhang46
lgao4
sfu5
li-elvin
vanjeff
tye1
xdu2
andrewfish
jljusten
rsun3
jcarsey
hhuan13