During setting the DnsServer, the DataSize check is incorrect.
This patch is to fix the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
UEFI Spec 2.7 adds the clarification on SetData interface usage to clear specific
individual data types. This patch is to support this feature.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch is to fix the potential issue recorded at Bugzilla 636:
https://bugzilla.tianocore.org/show_bug.cgi?id=636
The issue is caused by the IPv6 policy switching after PXEv6 boot. When IP
policy is changing, the IPv6 children used by PXE.UdpRead() will be destroyed.
Then, PXE Stop() function is called to uninstall the devicePath protocol,
which leads to the IPv6 PXE boot option goes missing.
Through the above analysis, the IP driver should take the responsibility for
the upper layer network stacks recovery by using ConnectController().
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ni Ruiyu <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
If we set PXEv6 as the first boot option and reboot immediately
after the first successful boot, it will assert. the root cause is
when we set the policy from manual to automatic in PXE driver,
the ip6 Configure item size is already set to zero and other
structures are also released, So it is not needed to perform DAD call
back function which is invoked by Ip6ConfigSetMaunualAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Having duplicated DNS server IPs specified is not an ideal
configuration, but not an error condition. This patch is to
remove the duplicated DNS address check to allow the same DNS
address setting in SetData().
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Update the interface name from ethA ethB to
eth10, eth11 etc if port number more than 9.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Currently, When there are more than 9 Ethernet ports available,
'ifconfig6 -l' is not listing all the ports, only show the ports 0 to 9.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Ip6ConfigSetDnsServer may cause ASSERT if the invalid DNS
server address received. The issue is triggered by the NULL
pointer(Tmp) free.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The previous DNS server data will be retained after the policy
changes from Auto to Manual. This patch is used to clean the
previous dhcp configuration data.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
v2:
*Since we have redefined the name of arch types in Dhcp.h for http boot,
it need to change corresponding codes.
Add a new head file Dhcp.h in Mde/Include/IndustryStandard, normalize the
universal option numbers and other network number tags.
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
In Ip6CleanService()it first cleaned some resources, then stop the timer .
While before the timer stopped it may try to access some already freed
data, which may generate an exception.
This patch updates the driver to stop the timer event before starting to
clean up the service data.
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
EFI_NOT_READY should not be treated as an error status
returned from SetData for Ip6ConfigDataTypeManualAddress
since there is an asynchronous operation for DAD process.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
v2:
*refine some codes
Add 2 macros in NetLib.h
#define IP4_MASK_MAX 32
#define IP6_PREFIX_MAX 128
we will use these two macros to check the max mask/prefix length,
instead of
#define IP4_MASK_NUM 33
#define IP6_PREFIX_NUM 129
which means a valid number
This will make the code readability and maintainability.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@@hpe.com>
The default policy for Ip6Config is Ip6ConfigPolicyAutomatic,
which results in all NIC ports starting SARR process when it
receives RA message with M flag from IPv6 router. So, this
patch is used to changes the the default IPv6 config policy to
Ip6ConfigPolicyManualand also defer the SetData operation after
Ip6ConfigProtocol installed. This update let the other platform
drivers have chance to change the default config data by consume
Ip6ConfigProtocol.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Fix a possible buffer overrun issue that could occur if PrefixLength >
128 . Changed == 128 to >= 128. Also remove check for Byte < 16, which
is no longer possible because of the first change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Multiple network protocols have a GetModeData() interface, which may
allocate memory resource in the return mode data structure. It's
callers responsibility to free these buffers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19758 6f19259b-4bc3-4df7-8a09-765794883524
A function with void return type doesn't need @retval line in its function
comment. This patch removes one redundant line from Ip6 driver in r18365.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18384 6f19259b-4bc3-4df7-8a09-765794883524
Modified the logic in Ip4Dxe and Ip6Dxe to not locate EFI_IPSEC2_PROTOCOL on each
message transmit/receive. Instead, register a callback in the drivers entry points
on the IpSec protocol installation, and process only if the protocol is installed.
This speeds up the network stacks when IpSec is not installed since there is a
penalty associated with searching the entire handle database on each packet processing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18365 6f19259b-4bc3-4df7-8a09-765794883524
class/subclass is the obseleted key word in VFR file. It is designed in framework HII.
After convert to UEFI HII, it is not used any longer. Now remove them from VFR
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17493 6f19259b-4bc3-4df7-8a09-765794883524
The IP6 driver may create duplicate IP6_DAD_ENTRY in DupAddrDetectList in some situation like:
1. Address policy switch but not clear the delay node list, OR
2. Set manual address repeatedly before the previous DAD is finished.
The NS sent out by duplicate DAD entry will mix up with the loop back multicast packet, result in DAD fail.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17263 6f19259b-4bc3-4df7-8a09-765794883524
- Fix EFI_IPv4_ADDRESS usages to use a macro to copy the structure
instead of direct assignment, to avoid runtime alignment errors.
- Delete excess local variables that are initialized but otherwise unused.
- Add LibraryClasses.ARM & AARCH64 section in NetworkPkg.dsc file,
containing a CompilerIntrinsicsLib null-library, required for successful
standalone package builds (copied from MdeModulePkg.dsc).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Randy Pawell <randy_pawell@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16472 6f19259b-4bc3-4df7-8a09-765794883524
2. Update IP6 driver to use previous configured prefix length if a pre-exist IP6 address with unspecified prefix length.
3. Add NULL check for Dhcp protocol pointer before it decline the address in Ip6ConfigSetStatefulAddrCallback() function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com>
Reviewed-By: Ye, Ting (ting.ye@intel.com)
Reviewed-By: Wu, Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16131 6f19259b-4bc3-4df7-8a09-765794883524
Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16049 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dong, Guo <guo.dong@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15960 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dong, Guo <guo.dong@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15947 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dong, Guo <guo.dong@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15946 6f19259b-4bc3-4df7-8a09-765794883524
Use CopyMem() to guarantee the NULL terminal will always be appended to the destination string.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com>
Reviewed-by: Yao, Jiewen <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15810 6f19259b-4bc3-4df7-8a09-765794883524
Signed-off-by: Kinney, Michael D <michael.d.kinney@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14216 6f19259b-4bc3-4df7-8a09-765794883524
2. Fix the driver binding Stop() hang issue in the network stack.
3. Add Ip4 raw data support.
4. Add iSCSI Dhcp option 60 support.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13995 6f19259b-4bc3-4df7-8a09-765794883524
2. Retrieve the IP information after iSCSI TCPv6 connection established and fill it into iBFT table.
3. Generate a random IAID for each NIC port to require different IPv6 address in PXE driver.
4. Update function EfiMtftp6Configure() and Mtftp6RrqHandleOack() to allocate at most one UdpIo.
5. Fix a typo from “destory” to “destroy” in network code.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13859 6f19259b-4bc3-4df7-8a09-765794883524
Per UEFI spec, on CallBack action EFI_BROWSER_ACTION_CHANGING, the return value of ActionRequest will be ignored, but on CallBack action EFI_BROWSER_ACTION_CHANGED, the return value of ActionRequest will be used.
But, EDKII browser still processes the got ActionRequest. And, all HII drivers in EDKII project also returns their expected ActionRequest value on action EFI_BROWSER_ACTION_CHANGING.
Now update the browser to follow the spec, and update all core Hii drivers to keep old working modal.
Signed-off-by: ydong10
Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12867 6f19259b-4bc3-4df7-8a09-765794883524
Jiaxin Wu
Zhang, Lubo
Gary Lin
Giri P Mudusuru
Fu, Siyuan
Samer El-Haj-Mahmoud
Jordan Justen
Fu Siyuan
Samer El-Haj-Mahmoud
Dandan Bi
Shumin Qiu
Randy Pawell
Eric Dong
Gao, Liming
Dong, Guo
Ye Ting
sfu5
tye1
ydong10