BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4243
This patch enables Tdx measurement in OvmfPkgX64 with below changes:
1) CC_MEASUREMENT_ENABLE is introduced in OvmfPkgX64.dsc. This flag
indicates if Intel TDX measurement is enabled in OvmfPkgX64. Its
default value is FALSE.
2) Include TdTcg2Dxe in OvmfPkgX64 so that CC_MEASUREMENT_PROTOCOL
is installed in a Td-guest. TdTcg2Dxe is controlled by
TDX_MEASUREMENT_ENABLE because it is only valid when Intel TDX
measurement is enabled.
3) OvmfTpmLibs.dsc.inc and OvmfTpmSecurityStub.dsc.inc are updated
because DxeTpm2MeasureBootLib.inf and DxeTpmMeasurementLib.inf
should be included to support CC_MEASUREMENT_PROTOCOL.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Similarly to the "cadence" mentioned in commit d272449d9e ("OvmfPkg:
raise DXEFV size to 11 MB", 2018-05-29), it's been ~1.75 years since
commit 5e75c4d1fe ("OvmfPkg: raise DXEFV size to 12 MB", 2020-03-11),
and we've outgrown DXEFV again (with NOOPT builds). Increase the DXEFV
size to 13MB now.
Do not modify all platform FDF files under OvmfPkg. "BhyveX64.fdf" is
still at 11MB, "OvmfXen.fdf" at 10MB. The "AmdSevX64.fdf",
"CloudHvX64.fdf", "IntelTdxX64.fdf" and "MicrovmX64.fdf" flash devices
could be modified similarly (from 12MB to 13MB), but I don't use or build
those platforms.
Tested on:
- IA32, q35, SMM_REQUIRE, Fedora 30 guest
- X64, pc (i440fx), no SMM, RHEL-7.9 guest
- IA32X64, q35, SMM_REQUIRE, RHEL-7.9 guest
Test steps:
- configure 3 VCPUs
- boot
- run "taskset -c $I efibootmgr" with $I covering 0..2
- systemctl suspend
- resume from virt-manager
- run "taskset -c $I efibootmgr" with $I covering 0..2
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4236
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add BUILD_SHELL flag, similar to the one in OvmfPkg/AmdSev,
to enable/disable building of the UefiShell as part of
the firmware image. The UefiShell should not be included for
secure production systems (e.g. SecureBoot) because it can be
used to circumvent security features.
The default value for BUILD_SHELL is TRUE to keep the default
behavior of the Ovmf build.
Note: the default for AmdSev is FALSE.
The BUILD_SHELL flag for AmdSev was introduced in b261a30c90.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The BaseMemEncryptSevLib functionality was updated to rely on the use of
the OVMF/SEV workarea to check for SEV guests. However, this area is only
updated when running the X64 OVMF build, not the hybrid Ia32/X64 build.
Base SEV support is allowed under the Ia32/X64 build, but it now fails
to boot as a result of the change.
Update the ResetVector code to check for SEV features when built for
32-bit mode, not just 64-bit mode (requiring updates to both the Ia32
and Ia32X64 fdf files).
Fixes: f1d1c337e7
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
In OvmfPkgX64 we enable 2 different CpuMpPei and CpuDxe drivers. The
difference between the drivers is the MpInitLib or MpInitLibUp. This is
acomplished by adding a MpInitLibDepLib.
In IntelTdxX64 we enable 2 versions of CpuDxe drivers. It is because PEI
is skipped in IntelTdxX64.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3904
TdxDxe driver is introduced for Intel TDX feature. Unfortunately, this
driver also breaks boot process in SEV-ES guest. The root cause is in
the PciLib which is imported by TdxDxe driver.
In a SEV-ES guest the AmdSevDxe driver performs a
MemEncryptSevClearMmioPageEncMask() call against the
PcdPciExpressBaseAddress range to mark it shared/unencrypted. However,
the TdxDxe driver is loaded before the AmdSevDxe driver, and the PciLib
in TdxDxe is DxePciLibI440FxQ35 which will access the
PcdPciExpressBaseAddress range. Since the range has not been marked
shared/unencrypted, the #VC handler terminates the guest for trying to
do MMIO to an encrypted region.
Adjusting the load sequence of TdxDxe and AmdSevDxe can fix the issue.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
SEV-Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
TDX-Tested-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3711
Discussion in https://bugzilla.tianocore.org/show_bug.cgi?id=1496 shows
that 8254TimerDxe was not written for OVMF. It was moved over from
PcAtChipsetPkg to OvmfPkg in 2019. Probably because OVMF was the only
user left.
Most likely the reason OVMF used 8254TimerDxe initially was that it could
just use the existing driver in PcAtChipsetPkg. And it simply hasn't
been changed ever.
CSM support was moved in 2019 too. (CSM support depends on 8254/8259
drivers). So 8254TimerDxe will be used when CSM_ENABLE=TRUE.
There are 4 .dsc which include the 8254Timer.
- OvmfPkg/AmdSev/AmdSevX64.dsc
- OvmfPkg/OvmfPkgIa32.dsc
- OvmfPkg/OvmfPkgIa32X64.dsc
- OvmfPkg/OvmfPkgX64.dsc
For the three OvmfPkg* configs using 8254TimerDxe with CSM_ENABLE=TRUE
and LapicTimerDxe otherwise.
For the AmdSev config it doesn't make sense to support a CSM. So use
the lapic timer unconditionally.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
TdxDxe driver is dispatched early in DXE, due to being list in APRIORI.
This module is responsible for below features:
- Sets max logical cpus based on TDINFO
- Sets PCI PCDs based on resource hobs
- Set shared bit in MMIO region
- Relocate Td mailbox and set its address in MADT table.
1. Set shared bit in MMIO region
Qemu allows a ROM device to set to ROMD mode (default) or MMIO mode.
When it is in ROMD mode, the device is mapped to guest memory and
satisfies read access directly.
In EDK2 Option ROM is treated as MMIO region. So Tdx guest access
Option ROM via TDVMCALL(MMIO). But as explained above, since Qemu set
the Option ROM to ROMD mode, the call of TDVMCALL(MMIO) always return
INVALID_OPERAND. Tdvf then falls back to direct access. This requires
to set the shared bit to corresponding PageTable entry. Otherwise it
triggers GP fault.
TdxDxe's entry point is the right place to set the shared bit in MMIO
region because Option ROM has not been discoverd yet.
2. Relocate Td mailbox and set the new address in MADT Mutiprocessor
Wakeup Table.
In TDX the guest firmware is designed to publish a multiprocessor-wakeup
structure to let the guest-bootstrap processor wake up guest-application
processors with a mailbox. The mailbox is memory that the guest firmware
can reserve so each guest virtual processor can have the guest OS send
a message to them. The address of the mailbox is recorded in the MADT
table. See [ACPI].
TdxDxe registers for protocol notification
(gQemuAcpiTableNotifyProtocolGuid) to call the AlterAcpiTable(), in
which MADT table is altered by the above Mailbox address. The protocol
will be installed in AcpiPlatformDxe when the MADT table provided by
Qemu is ready. This is to maintain the simplicity of the AcpiPlatformDxe.
AlterAcpiTable is the registered function which traverses the ACPI
table list to find the original MADT from Qemu. After the new MADT is
configured and installed, the original one will be uninstalled.
[ACPI] https://uefi.org/specs/ACPI/6.4/05_ACPI_Software_Programming_Model
/ACPI_Software_Programming_Model.html#multiprocessor-wakeup-structure
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
With this in place the tpm configuration is not duplicated for each of
our four ovmf config variants (ia32, ia32x64, x64, amdsev) and it is
easier to keep them all in sync when updating the tpm configuration.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Don't make the package Qemu centric so that we can introduce some
alternative support for other VMMs not using the fw_cfg mechanism.
This patch is purely about renaming existing files with no functional
change.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
PrintDxe produces gEfiPrint2ProtocolGuid and gEfiPrint2SProtocolGuid,
and those are consumed by the following PrintLib instance:
MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.inf
However, none of the OVMF DSC files contain such a PrintLib class
resolution, so none of the OVMF platforms need PrintDxe.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3744
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Platform features and capabilities are traditionally discovered via the
CPUID instruction. Hypervisors typically trap and emulate the CPUID
instruction for a variety of reasons. There are some cases where incorrect
CPUID information can potentially lead to a security issue. The SEV-SNP
firmware provides a feature to filter the CPUID results through the PSP.
The filtered CPUID values are saved on a special page for the guest to
consume. Reserve a page in MEMFD that will contain the results of
filtered CPUID values.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
During the SNP guest launch sequence, a special secrets page needs to be
inserted by the VMM. The PSP will populate the page; it will contain the
VM Platform Communication Key (VMPCKs) used by the guest to send and
receive secure messages to the PSP.
The purpose of the secrets page in the SEV-SNP is different from the one
used in SEV guests. In SEV, the secrets page contains the guest owner's
private data after the remote attestation.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Compile the Tcg2PlatformPei related code now to support TPM 2 platform
hierachy disablement if the TPM state cannot be resumed upon S3 resume.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Both the TDX and SEV support needs to reserve a page in MEMFD as a work
area. The page will contain meta data specific to the guest type.
Currently, the SEV-ES support reserves a page in MEMFD
(PcdSevEsWorkArea) for the work area. This page can be reused as a TDX
work area when Intel TDX is enabled.
Based on the discussion [1], it was agreed to rename the SevEsWorkArea
to the OvmfWorkArea, and add a header that can be used to indicate the
work area type.
[1] https://edk2.groups.io/g/devel/message/78262?p=,,,20,0,0,0::\
created,0,SNP,20,2,0,84476064
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Switch the historical OvmfPkg* platforms from the AcpiPlatformDxe driver
to the QemuFwCfgAcpiPlatformDxe driver. (The latter is used by the
ArmVirtQemu* platforms as well.)
The change effectively replaces the following call tree:
InstallAcpiTables [AcpiPlatform.c]
XenDetected [XenPlatformLib] *
InstallXenTables [Xen.c] *
GetXenAcpiRsdp [Xen.c] *
InstallQemuFwCfgTables [QemuFwCfgAcpi.c]
...
InstallOvmfFvTables [AcpiPlatform.c] *
QemuDetected [Qemu.c] *
LocateFvInstanceWithTables [AcpiPlatform.c] *
QemuInstallAcpiTable [Qemu.c] *
QemuInstallAcpiMadtTable [Qemu.c] *
CountBits16 [Qemu.c] *
QemuInstallAcpiSsdtTable [Qemu.c] *
GetSuspendStates [Qemu.c] *
PopulateFwData [Qemu.c] *
with the one below:
InstallAcpiTables [QemuFwCfgAcpiPlatform.c]
InstallQemuFwCfgTables [QemuFwCfgAcpi.c]
...
eliminating the sub-trees highlighted with "*".
There are two consequences:
(1) Xen compatibility is removed from the ACPI platform driver of the
historical OvmfPkg* platforms.
(2) The ACPI tables that are statically built into OVMF (via
"OvmfPkg/AcpiTables/AcpiTables.inf") are never installed. In
particular, OVMF's own runtime preparation of the MADT and SSDT is
eliminated.
Because of (2), remove the "OvmfPkg/AcpiTables/AcpiTables.inf" module as
well -- and then the ACPITABLE build rule too.
Note that (2) only removes effectively dead code; the QEMU ACPI
linker-loader has taken priority since QEMU 1.7.1 (2014). References:
- https://wiki.qemu.org/Planning/1.7
- https://wiki.qemu.org/Features/ACPITableGeneration
- edk2 commit 96bbdbc856 ("OvmfPkg: AcpiPlatformDxe: download ACPI
tables from QEMU", 2014-03-31)
- edk2 commit 387536e472 ("OvmfPkg: AcpiPlatformDxe: implement QEMU's
full ACPI table loader interface", 2014-09-22)
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-4-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Remove the three Xen drivers as the first step for removing Xen support
from the historical OvmfPkg* platforms. Xen (HVM and PVH) guests are
supported by the dedicated OvmfXen platform.
No module remains dependent on XenHypercallLib, so remove the
XenHypercallLib class resolutions too, from the DSC files.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
During PEI, the MMIO range for the TPM is marked as encrypted when running
as an SEV guest. While this isn't an issue for an SEV guest because of
the way the nested page fault is handled, it does result in an SEV-ES
guest terminating because of a mitigation check in the #VC handler to
prevent MMIO to an encrypted address. For an SEV-ES guest, this range
must be marked as unencrypted.
Create a new x86 PEIM for TPM support that will map the TPM MMIO range as
unencrypted when SEV-ES is active. The gOvmfTpmMmioAccessiblePpiGuid PPI
will be unconditionally installed before exiting. The PEIM will exit with
the EFI_ABORTED status so that the PEIM does not stay resident. This new
PEIM will depend on the installation of the permanent PEI RAM, by
PlatformPei, so that in case page table splitting is required during the
clearing of the encryption bit, the new page table(s) will be allocated
from permanent PEI RAM.
Update all OVMF Ia32 and X64 build packages to include this new PEIM.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <42794cec1f9d5bc24cbfb9dcdbe5e281ef259ef5.1619716333.git.thomas.lendacky@amd.com>
[lersek@redhat.com: refresh subject line]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In order to be able to issue messages or make interface calls that cause
another #VC (e.g. GetLocalApicBaseAddress () issues RDMSR), add support
for nested #VCs.
In order to support nested #VCs, GHCB backup pages are required. If a #VC
is received while currently processing a #VC, a backup of the current GHCB
content is made. This allows the #VC handler to continue processing the
new #VC. Upon completion of the new #VC, the GHCB is restored from the
backup page. The #VC recursion level is tracked in the per-vCPU variable
area.
Support is added to handle up to one nested #VC (or two #VCs total). If
a second nested #VC is encountered, an ASSERT will be issued and the vCPU
will enter CpuDeadLoop ().
For SEC, the GHCB backup pages are reserved in the OvmfPkgX64.fdf memory
layout, with two new fixed PCDs to provide the address and size of the
backup area.
For PEI/DXE, the GHCB backup pages are allocated as boot services pages
using the memory allocation library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <ac2e8203fc41a351b43f60d68bdad6b57c4fb106.1610045305.git.thomas.lendacky@amd.com>
The purpose of the driver is to ease file exchange (file sharing) between
the guest firmware and the virtualization host. The driver is supposed to
interoperate with QEMU's "virtiofsd" (Virtio Filesystem Daemon).
References:
- https://virtio-fs.gitlab.io/
- https://libvirt.org/kbase/virtiofs.html
VirtioFsDxe will bind virtio-fs devices, and produce
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL instances on them.
In the longer term, assuming QEMU will create "bootorder" fw_cfg file
entries for virtio-fs devices, booting guest OSes from host-side
directories should become possible (dependent on the matching
QemuBootOrderLib enhancement).
Add the skeleton of the driver. Install EFI_DRIVER_BINDING_PROTOCOL with
stub member functions. Install EFI_COMPONENT_NAME2_PROTOCOL with final
member functions. This suffices for the DRIVERS command in the UEFI Shell
to list the driver with a human-readable name.
The file permission model is described immediately in the INF file as a
comment block, for future reference.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Reserve a fixed area of memory for SEV-ES use and set a fixed PCD,
PcdSevEsWorkAreaBase, to this value.
This area will be used by SEV-ES support for two purposes:
1. Communicating the SEV-ES status during BSP boot to SEC:
Using a byte of memory from the page, the BSP reset vector code can
communicate the SEV-ES status to SEC for use before exception
handling can be enabled in SEC. After SEC, this field is no longer
valid and the standard way of determine if SEV-ES is active should
be used.
2. Establishing an area of memory for AP boot support:
A hypervisor is not allowed to update an SEV-ES guest's register
state, so when booting an SEV-ES guest AP, the hypervisor is not
allowed to set the RIP to the guest requested value. Instead an
SEV-ES AP must be re-directed from within the guest to the actual
requested staring location as specified in the INIT-SIPI-SIPI
sequence.
Use this memory for reset vector code that can be programmed to have
the AP jump to the desired RIP location after starting the AP. This
is required for only the very first AP reset.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
A GHCB page is needed during the Sec phase, so this new page must be
created. Since the #VC exception handler routines assume that a per-CPU
variable area is immediately after the GHCB, this per-CPU variable area
must also be created. Since the GHCB must be marked as an un-encrypted,
or shared, page, an additional pagetable page is required to break down
the 2MB region where the GHCB page lives into 4K pagetable entries.
Create a new entry in the OVMF memory layout for the new page table
page and for the SEC GHCB and per-CPU variable pages. After breaking down
the 2MB page, update the GHCB page table entry to remove the encryption
mask.
The GHCB page will be used by the SEC #VC exception handler. The #VC
exception handler will fill in the necessary fields of the GHCB and exit
to the hypervisor using the VMGEXIT instruction. The hypervisor then
accesses the GHCB in order to perform the requested function.
Four new fixed PCDs are needed to support the SEC GHCB page:
- PcdOvmfSecGhcbBase UINT32 value that is the base address of the
GHCB used during the SEC phase.
- PcdOvmfSecGhcbSize UINT32 value that is the size, in bytes, of the
GHCB area used during the SEC phase.
- PcdOvmfSecGhcbPageTableBase UINT32 value that is address of a page
table page used to break down the 2MB page into
512 4K pages.
- PcdOvmfSecGhcbPageTableSize UINT32 value that is the size, in bytes,
of the page table page.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Create the driver with only a dummy LsiScsiEntryPoint() for the further
implementation of the driver for LSI 53C895A SCSI controller.
v2: Fix the mixed-case GUID string
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-2-glin@suse.com>
OVMF booting stops with the assert if built with Xcode on macOS:
Loading driver at 0x0001FAB8000 EntryPoint=0x0001FABF249 LinuxInitrdDynamicShellCommand.efi
InstallProtocolInterface: BC62157E-3E33-4FEC-9920-2D3B36D750DF 1F218398
ProtectUefiImageCommon - 0x1F218140
- 0x000000001FAB8000 - 0x0000000000008A60
ASSERT_EFI_ERROR (Status = Unsupported)
ASSERT LinuxInitrdDynamicShellCommand.c(378): !EFI_ERROR (Status)
The assert comes from InitializeHiiPackage() after an attempt to
retrieve HII package list from ImageHandle.
Xcode still doesn't support HII resource section and
LinuxInitrdDynamicShellCommand depends on it. Likewise 277a3958d9
("OvmfPkg: Don't include TftpDynamicCommand in XCODE5 tool chain"),
disable initrd command if built with Xcode toolchain
Fixes: ec41733cfd ("OvmfPkg: add the 'initrd' dynamic shell command")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200514134820.62047-1-r.bolshakov@yadro.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In preparation for support booting from PvScsi devices, create a
basic scaffolding for a driver.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-2-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Leif suggested that FDF include files should preferably refer with their
names to the FDF file sections from which they are included.
Therefore
- rename "OvmfPkg.fdf.inc" to "OvmfPkgDefines.fdf.inc" (included from the
[Defines] section),
- rename "DecomprScratchEnd.fdf.inc" to "FvmainCompactScratchEnd.fdf.inc"
(included under the [FV.FVMAIN_COMPACT] section).
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: http://mid.mail-archive.com/20200312142006.GG23627@bivouac.eciton.net
Ref: https://edk2.groups.io/g/devel/message/55812
Suggested-by: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200312223555.29267-3-lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
FaultTolerantWritePei consumes:
- PcdFlashNvStorageFtwWorkingBase,
- PcdFlashNvStorageFtwSpareBase.
VariablePei consumes:
- PcdFlashNvStorageVariableBase64.
Due to the previous patches in this series, the above PCDs are available
in the PEI phase, in the SMM_REQUIRE build.
FaultTolerantWritePei produces a GUID-ed HOB with
FAULT_TOLERANT_WRITE_LAST_WRITE_DATA as contents. It also installs a Null
PPI that carries the same gEdkiiFaultTolerantWriteGuid as the HOB.
VariablePei depends on the Null PPI mentioned above with a DEPEX, consumes
the HOB (which is safe due to the DEPEX), and produces
EFI_PEI_READ_ONLY_VARIABLE2_PPI.
This enables read-only access to non-volatile UEFI variables in the PEI
phase, in the SMM_REQUIRE build.
For now, the DxeLoadCore() function in
"MdeModulePkg/Core/DxeIplPeim/DxeLoad.c" will not access the
"MemoryTypeInformation" variable, because OVMF's PlatformPei always
produces the MemoryTypeInformation HOB.
(Note: when the boot mode is BOOT_ON_S3_RESUME, PlatformPei doesn't build
the HOB, but that's in sync with DxeLoadCore() also not looking for either
the HOB or the UEFI variable.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-5-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Similarly to the "cadence" mentioned in commit d272449d9e ("OvmfPkg:
raise DXEFV size to 11 MB", 2018-05-29), it's been ~1.75 years, and we've
outgrown DXEFV again. Increase the DXEFV size to 12MB now.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2585
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310175025.18849-1-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add the components that expose the QEMU abstract loader file system so
that we can switch over our PlatformBmLib over to it in a subsequent
patch.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The @file comments in UefiCpuPkg/CpuS3DataDxe say,
[...] It also only supports the number of CPUs reported by the MP
Services Protocol, so this module does not support hot plug CPUs. This
module can be copied into a CPU specific package and customized if these
additional features are required. [...]
The driver is so small that the simplest way to extend it with hotplug
support is indeed to clone it at first. In this patch, customize the
driver only with the following no-op steps:
- Update copyright notices.
- Update INF_VERSION to the latest INF spec version (1.29).
- Update FILE_GUID.
- Drop the UNI files.
- Replace EFI_D_VERBOSE with DEBUG_VERBOSE, to appease "PatchCheck.py".
This patch is best reviewed with:
$ git show --find-copies-harder
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-15-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Add a new SMM driver skeleton that registers a root SMI handler, and
checks if the SMI control value (written to 0xB2) indicates a CPU hotplug
SMI.
QEMU's ACPI payload will cause the OS to raise a broadcast SMI when a CPU
hotplug event occurs, namely by writing value 4 to IO Port 0xB2. In other
words, control value 4 is now allocated for this purpose; introduce the
ICH9_APM_CNT_CPU_HOTPLUG macro for it.
The standard identifiers in this driver use the new MM (Management Mode)
terminology from the PI spec, not the earlier SMM (System Management Mode)
terms.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-7-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
A following patch is going to use the same configuration for TPM1.2
and TPM2.0, and it's simpler to support both than variable
configurations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226152433.1295789-2-marcandre.lureau@redhat.com>
Tested-by: Simon Hardy <simon.hardy@itdev.co.uk>
Add the 'initrd' dynamic shell command to the build so we can load
Linux initrds straight from the shell using the new generic protocol,
which does not rely on initrd= being passed on the command line.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Put the TPM2 related DXE modules together in the DSC, and add a
TPM2 support header comment while at it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently some tests check the value of SOURCE_DEBUG_ENABLE, and some
tests check if it's defined or not. Additionally, in UefiPayloadPkg as
well as some other trees, we define it as FALSE in the .dsc file.
This patch changes all of the Ovmf platforms to explicitly define it as
FALSE by default, and changes all of the checks to test if the value is
TRUE.
Signed-off-by: Peter Jones <pjones@redhat.com>
Message-Id: <20190920184507.909884-1-pjones@redhat.com>
[lersek@redhat.com: drop Contributed-under line, per TianoCore BZ#1373]
[lersek@redhat.com: replace "!= TRUE" with more idiomatic "== FALSE"]
Cc: Andrew Fish <afish@apple.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
QemuVideoDxe installs its own legacy INT 10h handler for the benefit of
systems like Windows 2008r2 which attempt to use INT 10h even when booted
via EFI.
This interacts extremely badly with a CSM actually attempting to install
a real video BIOS.
The last thing done before invoking a legacy OpROM is to call INT 10h to
set a plain text mode. In the case where it's the video BIOS OpROM being
loaded, INT 10h will normally point to an iret stub in the CSM itself.
Unless QemuVideoDxe has changed INT10h to point to a location in the
0xC0000 segment that it didn't allocate properly, so the real OpROM has
been shadowed over them top of it, and the INT 10h vector now points to
some random place in the middle of the newly-shadowed OpROM.
Don't Do That Then. QemuVideoDxe doesn't do any acceleration and just
sets up a linear framebuffer, so we don't lose much by just
unconditionally using BiosVideoDxe instead when CSM is present.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-4-dwmw2@infradead.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit updates the OVMF DSC/FDF files to consume the copied CSM
components within OvmfPkg.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1842
According to the discussion at:
https://edk2.groups.io/g/devel/topic/30918343#38093
For OVMF, we keep both ISA stacks:
* The legacy one in PcAtChipsetPkg/IntelFrameworkModulePkg
* The Sio bus based OVMF-specified one introduced by commit a5cc178aeb
for a period of time (includes 1 stable tag: edk2-stable201905). And we
also keep the Sio bus based OVMF-specified stack as the default one (via a
build option 'USE_LEGACY_ISA_STACK') to validate its stability.
This commit will propose to drop the legacy ISA stack from OVMF and remove
the usage of the build flag 'USE_LEGACY_ISA_STACK' at the same time. This
is considered as a preparation for the removal of
PcAtChipsetPkg/IsaAcpiDxe & IntelFrameworkModulePkg.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch updates the platform DSC/FDF files to use the include fragment
files provided by NetworkPkg.
The feature enabling flags in [Defines] section have been updated to use
the NetworkPkg's terms, and the value has been overridden with the original
default value on this platform.
v2:1.Make the comments before Network definition align other parts.
2.Set NETWORK_ALLOW_HTTP_CONNECTIONS true.
3.Remove TcpIoLib in lib classes section.
4.Withdraw the removal of [PcdsFixedAtBuild.X64].
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Message-Id: <20190516081810.27840-2-shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1293
[lersek@redhat.com: add TianoCore Bugzilla reference]
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
This commit updates the OVMF DSC/FDF files to consume the copied
8259InterruptControllerDxe and 8254TimerDxe drivers within OvmfPkg.
The unconsumed PCD:
gPcAtChipsetPkgTokenSpaceGuid.Pcd8259LegacyModeEdgeLevel
is removed from DSC files as well.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1495
This commit will add a static build flag 'USE_LEGACY_ISA_STACK' to select
the ISA driver stack.
If the flag is set to TRUE, the below driver stack will be used:
PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
If the flag is set to FALSE, the below driver stack will be used:
OvmfPkg/SioBusDxe/SioBusDxe.inf
MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf
MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KeyboardDxe.inf
The default value is set to FALSE in OVMF DSC files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1495
There is a plan to remove the IntelFrameworkModulePkg:
https://bugzilla.tianocore.org/show_bug.cgi?id=1605
And for driver:
IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe
This patch proposes to drop the ISA Floppy device support in OVMF.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds the TCG2 Configuration menu to the Device Manager
menu. We can apparently reuse the sample Tcg2ConfigDxe from
SecurityPkg/Tcg/Tcg2Config without obvious adverse effects. The
added TCG2 Configuration menu now shows details about the attached
TPM 2.0 and lets one for example configure the active PCR banks
or issue commands, among other things.
The code is added to Ovmf by building with -DTPM2_ENABLE and
-DTPM2_CONFIG_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Min M Xu
Laszlo Ersek
Gerd Hoffmann
Oliver Steffen
Tom Lendacky
Sebastien Boeuf
Philippe Mathieu-Daude
Brijesh Singh via groups.io
Stefan Berger
Brijesh Singh
Vladimir Olovyannikov
Gary Lin
Roman Bolshakov
Nikita Leshenko
Liran Alon
Ard Biesheuvel
Marc-André Lureau
Peter Jones
David Woodhouse
Hao A Wu
Fu Siyuan
Michael D Kinney
Stefan Berger