Commit Graph

925 Commits

Author SHA1 Message Date
Udit Kumar 112c6c2237 ArmPlatformPkg: Include PL011UartClock Lib
This patch gets PL011 baud rate clock from
pl011 uart clock lib instead of Pcd.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-06-15 12:57:13 +02:00
Udit Kumar cbba5ca104 ArmPlatformPkg: PL011 Dynamic clock freq Support
Some platform support dynamic clocking, which is controlled by some
jumper setting or hardware registers. Result of that is that PCD
PL011UartClkInHz would need to be updated for frequency change.

This patch implements support for dynamic frequency for PL011 uart.

This patch implements default lib, which is using Pcd. Platform which
needs dynamic clocking needs implement PL011UartClockLib

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-06-13 11:45:50 +02:00
Girish Pathak b99f81268a ArmPlatformPkg: New DP500/DP550/DP650 GOP driver
This change adds support for the ARM Mali DP500/DP500/DP650 display
processors using the GOP protocol. It has been tested on FVP base
models + DP550 support. This change adds platform independant LcdHwLib
library. A corresponding platform specific library will be submitted
to edk-platforms/Platform/ARM/VExpressPkg.

This change does not modify functionality provided by PL111 or
HDLCD. This LcdHwLib implementation should be suitable for those
platforms that implement ARM Mali DP500/DP550/DP650 replacing
PL111/HDLCD.

Only graphics layer of the ARM Mali DP is configured for rendering
the RGB/BGR format frame buffer to satisfy the UEFI GOP requirements
Other layers e.g. video layers are not configured.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:08:51 +01:00
Girish Pathak 36bbbf4f73 ArmPlatformPkg: Reserving framebuffer at build
Currently framebuffer memory is either reserved in special VRAM or
dynamically allocated using boot services memory allocation functions.
When allocated using boot services calls the memory has to be allocated
as EfiBootServicesData. Unfortunately failures have been seen with this
case.  There is also an unfortunate lack of control on the placement of
the framebuffer.

This change introduces two PCDs, PcdArmLcdFrameBufferBase and
PcdArmLcdFrameBufferSize which enable build time reservation of the
framebuffer, avoiding the need to allocate dynamically. This allows
the framebuffer to appear as "I/O memory" outside of the normal RAM
map, which is similar to the "VRAM" case.

This change has no impact on current code, only enables the option
of build time reservation of framebuffers.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:01:24 +01:00
Girish Pathak 90347ab325 ArmPlatformPkg: Additional display modes
Add definitions for new display modes such as HD 720.
This has no effect on existing display drivers.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:01:18 +01:00
Girish Pathak 268aad6744 ArmPlatformPkg: PCD to swap red/blue format for HDLCD
This change adds a new PCD PcdArmHdlcdSwapBlueRedSelect
to swap values for HDLCD RED_SELECT and BLUE_SELECT registers
on platforms where blue and red hardware lines are swapped.

If set to TRUE in the platform dsc, HDLCD library will swap the values
while setting RED_SELECT and BLUE_SELECT registers. The default
value of the PCD is FALSE.

NOTE: The motive for this is that a discrepancy in the Red/Blue lines
exists between some VersatileExpress platforms.  Rather than have
divergent code, this build switch allows a simple, pragmatic solution.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:01:11 +01:00
Girish Pathak fe787dfb0f ArmPlatformPkg: Add PCD to select pixel format
Current HDLCD and PL111 platform libraries do not support display modes
with PixelBlueGreenRedReserved8BitPerColor format, i.e. because of
historical confusion, they do not support the UEFI default
PixelBlueGreenRedReserved8BitPerColor format

In LcdPlatformLib for PL111, LcdPlatformQueryMode returns the pixel
format as PixelRedGreenBlueReserved8BitPerColor which is wrong, because
that does not match the display controller's pixel format which is set
to BGR in PL111Lcd LcdHwLib.

Also it is not possible to configure pixel format as RGB/BGR for the
display modes for a platform at build time.

This change adds PcdGopPixelFormat to configure pixel format as
    PixelRedGreenBlueReserved8BitPerColor    or
    PixelBlueGreenRedReserved8BitPerColor    or
    PixelBitMask.
With this change, pixel format can be selected in the platform specific
.dsc file for all supported display modes.

Support for PixelBitMask is not implemented in PL111 or HDLCD LcdHwLib
libraries, hence  HDLCD and PL111 platform libraries will return error
EFI_UNSUPPORTED if PcdGopPixelFormat is set to PixelBitMask.  Indeed,
it is not clear what selecting PixelBitMask might mean, but the option
is allowed as it might suit a custom platform.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:01:04 +01:00
Girish Pathak 262c88461b ArmPlatformPkg: Redefine LcdPlatformGetTimings function
The LcdPlatformGetTimings interface function takes similar sets of
multiple parameters for horizontal and vertical timings which can be
aggregated in a common data type. This change defines a structure
SCAN_TIMINGS for this which can be used to describe both horizontal and
vertical scan timings, and accordingly redefines the
LcdPlatformGetTiming interface, greatly reducing the amount of data
passed about.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:00:57 +01:00
Girish Pathak c18ef81e79 ArmPlatformPkg: Implement LcdIdentify function for HDLCD GOP
LcdIdentify function does not currently check presence of HDLCD
controller.

Implement this functionality by reading HDLCD_REG_VERSION and checking
against the PRODUCT_ID field to detect presence of HDLCD controller.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:00:52 +01:00
Girish Pathak b5daabdcd8 ArmPlatformPkg: PL111Lcd: Combine two writes to LCDControl
Currenty bit LcdPwr of the LCDControl register is enabled immediately
after setting other bits of the LCDControl register. This two write
sequence is unnecessary. This change removes this extra write by setting
LcdPwr bit along with other bits of the LcdControl register.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:00:46 +01:00
Girish Pathak d1ee57e581 ArmPlatformPkg: PL111Lcd: Replace magic number with macro
Minor code change, replaces magic number with macro in LCD disable.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:00:37 +01:00
Girish Pathak 3da4193bb6 ArmPlatformPkg: HDLCD and PL111: Update debug ASSERTS
This change moves some ASSERTs in error handling code
to improve efficiency in DEBUG build. This change also
removes redundant error code returns.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:00:30 +01:00
Girish Pathak 4257dfaa61 ArmPlatformPkg: Tidy Lcd code: Updated comments
There is no functional modification in this change
some comments are modified and a few new comments are added.
This is to prevent mixing formatting changes with functional
changes.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 12:00:23 +01:00
Girish Pathak b1b69d2606 ArmPlatformPkg: Tidy Lcd code: Coding standard
There is no functional modification in this change
As preparation for further work, the formatting is corrected to meet
the EDKII coding standard.
Of specific note, some invalid include guards were fixed.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 11:42:13 +01:00
Girish Pathak e10c79145e ArmPlatformPkg: Rectify line endings of LcdPlatformNullLib
This fix changes line endings of LcdPlatformNullLib.c to DOS
style line endings from UNIX style line endings to meet the EDK2
coding standard.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 11:38:09 +01:00
Girish Pathak e366336525 ArmPlatformPkg: Rectify line endings of LcdHwNullLib
This fix changes line endings of LcdHwNullLib.c to DOS
style line endings from UNIX style line endings to meet the
EDK2 coding standard. Note it also fixes an end of line
whitespace.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-23 11:38:03 +01:00
Laszlo Ersek 221c4f626f ArmPlatformPkg/PL031RealTimeClockLib: depend on gEfiCpuArchProtocolGuid
The RealTimeClockLib class is declared under EmbeddedPkg, so that
platforms can provide the internals for the
EmbeddedPkg/RealTimeClockRuntimeDxe driver. In turn the driver produces
the Real Time Clock Arch Protocol, without which UEFI drivers cannot be
dispatched.

The PL031RealTimeClockLib instance calls gDS->SetMemorySpaceAttributes()
in the LibRtcInitialize() public function. This DXE service depends on the
CPU Arch Protocol. Add it to the depex.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-12 21:24:39 +02:00
Laszlo Ersek 96337c6dbb ArmPlatformPkg/NorFlashDxe: depend on gEfiCpuArchProtocolGuid
NorFlashFvbInitialize() calls gDS->SetMemorySpaceAttributes() to mark the
varstore flash region as uncached. This DXE service depends on the CPU
Architectural protocol, and the DXE core is allowed to return
EFI_NOT_AVAILABLE_YET if it hasn't dispatched ArmPkg/Drivers/CpuDxe
earlier. Make the dependency explicit.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-12 21:24:37 +02:00
Laszlo Ersek 6281a2ed3b ArmPlatformPkg/NorFlashDxe: cue the variable driver with NvVarStoreFormatted
The BEFORE depex opcode that we currently use to force ourselves in front
of the variable driver cannot be combined with other depex opcodes.
Replace the depex with TRUE, and signal NvVarStoreFormattedLib through the
installation of "gEdkiiNvVarStoreFormattedGuid".

Platforms that rely on NorFlashDxe to format the variable store (as
opposed to formatting a variable store template through an FDF file, as
part of the build) should hook NvVarStoreFormattedLib into the variable
drivers they use, so that the latter await our cue.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-12 21:24:34 +02:00
Laszlo Ersek 0f87c53d0d ArmPlatformPkg/NorFlashDxe: initialize varstore headers eagerly
The lazy initialization of the varstore FVB makes no longer sense at this
point:

- "mNorFlashInstanceTemplate.Initialize" is NULL;

- in NorFlashCreateInstance(), we only set Instance->Initialize to
  non-NULL -- namely NorFlashFvbInitialize() -- if the FVB stands for the
  variable store (see "ContainVariableStorage" / "SupportFvb");

- we call Instance->Initialize() from three places:

  - from NorFlashWriteSingleBlock(), which is too late for the variable
    read service ("variable write" depends on "variable read");

  - from InitializeFvAndVariableStoreHeaders(), but that is only reachable
    from NorFlashFvbInitialize(), i.e. recursively from
    Instance->Initialize() itself;

  - and from FvbRead(), which is never called by the variable driver, only
    by the FTW driver. However, the variable driver may read (not write)
    the memory-mapped varstore flash chip before the FTW driver is
    dispatched.

Therefore the lazy initialization is both superfluous and insufficient.
Initialize the varstore headers eagerly, before we install the FVB
protocol interface.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-04-12 21:24:32 +02:00
Ard Biesheuvel 44d2e8d7ca ArmPlatformPkg/MemoryInitPeiLib: reserve rather than remove FV memory
Instead of completely removing the memory occupied by the primary PrePi
FV from the memory map, thereby making it inaccessible to the OS, mark
it as boot services data. This will ensure that the memory is left
untouched by the firmware, but will release it to the OS when it calls
ExitBootServices().

Note that for reasons that are not entirely clear, this only works as
desired if the memory allocation HOB and the resource descriptor HOB
that describe the region are identical in offset and size, and so we
still need to iterate over the descriptors and split them up.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-02-28 16:10:58 +00:00
Ard Biesheuvel e7f0a829c9 ArmPlatformPkg/MemoryInitPeiLib: revert "don't reserve primary FV in memory"
Commit 8ae5fc1829 ("ArmPlatformPkg/MemoryInitPeiLib: don't reserve
primary FV in memory") deleted the code that removes the memory covering
the primary firmware volume from the memory map. The assumption was that
this is no longer necessary now that we no longer expose compression and
PE/COFF loader library code from the PrePi module to DXE core.

However, the FV is still declared, and so code may attempt to access it
anyway, which may cause unexpected results depending on whether the
memory has been reused for other purposes in the mean time. So revert
this change in preparation of dealing with this in a better way.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-02-28 16:10:49 +00:00
Ard Biesheuvel f9669f09fb ArmPlatformPkg: retire obsolete PCDs
Retire a whole bunch of ArmPlatformPkg PCDs that are either related
to the ARM BDS, to secure world execution or to stuff that has been
migrated to edk2-platforms.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-12 17:40:17 +00:00
Ard Biesheuvel ab3886f02d ArmPlatformPkg: remove old PL111/HdLcd driver code
Now that LcdGraphicsOutputDxe has been refactored, remove the old code
that is no longer used.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-12 17:40:16 +00:00
Ard Biesheuvel 2671d89890 ArmPlatformPkg: create hw-agnostic LcdGraphicsOutputDxe driver
Create a new LcdGraphicsOutputDxe driver from the existing sources that
takes its hardware abstractions from a LcdHwLib library instance rather
than from a .c file linked directly. All we need is a new .inf file, and
a minimal tweak to LcdGraphicsOutputDxe.h to reuse the LcdHwlib prototypes
rather than open code them.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
[ardb: add it to ArmPlatformPkg.dsc so we can build test it standalone]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-12 17:40:16 +00:00
Ard Biesheuvel 3e7105bb6c ArmPlatformPkg: implement LcdHwLib for HdLcd
Convert the HdLcd specific code of LcdGraphicsOutputDxe into a LcdHwlib
implementation that we will wire up later into LcdGraphicsOutputDxe.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-12 17:40:12 +00:00
Ard Biesheuvel 27f9f34968 ArmPlatformPkg: implement LcdHwLib for PL111
Convert the PL111 specific code of LcdGraphicsOutputDxe into a LcdHwlib
implementation that we will wire up later into LcdGraphicsOutputDxe.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-12 17:37:41 +00:00
Ard Biesheuvel 99cfb43aa6 ArmPlatformPkg: introduce LcdHwLib library class
Add the declaration and include file for the new LcdHwLib library class,
which will allow us to abstract away from platform  variations in the
LCD graphics output driver.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
[ardb: add NULL implementation as well and add it to ArmPlatformPkg.dsc]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-12 17:37:29 +00:00
Ard Biesheuvel a5be96819f ArmPlatformPkg/LcdPlatformNullLib: fix incorrect library class
Use LcdPlatformLib not LcdPlatformNullLib (which is the name of this
instance) as LIBRARY_CLASS attribute.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 19:34:11 +00:00
Ard Biesheuvel 5e0e586345 ArmPlatformPkg: enable NOOPT build
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:38:49 +00:00
Ard Biesheuvel 2b129e87c0 ArmPlatformPkg: add package .DSC file
Now that we have removed all the cruft from ArmPlatformPkg, add a .DSC
file that builds all the remaining components standalone, i.e., outside
of the context of any particular platform. This is primarily intended
for build time testing.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:31:27 +00:00
Ard Biesheuvel 4ab99aa266 ArmPlatformPkg: add Null implementation of NorFlashPlatformLib
In order to be able to build ArmPlatformPkg components outside of
the context of a particular platform, add Null implementation of
NorFlashPlatformLib.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:31:23 +00:00
Ard Biesheuvel 62dfd2c2d0 ArmPlatformPkg: add Null implementation of LcdPlatformlLib
In order to be able to build ArmPlatformPkg components outside of
the context of a particular platform, add Null implementation of
LcdPlatformlLib.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:31:19 +00:00
Ard Biesheuvel 802d0dfd65 ArmPlatformPkg/PrePeiCoreMPCore: use a unique GUID
PrePeiCoreMPCore reuses the GUID of its unicore sibling, which is
usually fine, given that platforms never include both. However, it
prevents us from creating a package .DSC that does include both, so
update the GUID to a fresh one.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:31:15 +00:00
Ard Biesheuvel 42158fdf2c ArmPlatformPkg: remove unused ArmPlatformLibNullSec
ArmPlatformLibNullSec is built from a secondary .inf that omits
ArmPlatformLibNullMem.c from the [Sources] section so the library
can be used in a SEC context. This is slightly dodgy, given that
the resulting library is incomplete. Let's just remove this version,
since it isn't used anywhere anyway.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:31:03 +00:00
Ard Biesheuvel a8406340bd ArmPlatformPkg: remove unused SP804 driver and TimerLib implementation
None of the platforms we support use these so remove them.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:59 +00:00
Ard Biesheuvel 134f669b2a ArmPlatformPkg: remove unused ArmTrustZone driver
This driver is no longer used anywhere so remove it.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:55 +00:00
Ard Biesheuvel cbfe0ee492 ArmPlatformPkg: remove unused PL310 driver
This driver is not used by any platforms so remove it.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:51 +00:00
Ard Biesheuvel 1bf597d052 ArmPlatformPkg: remove PL34xDmc driver
Remove PL34xDmc driver which is not used by any platforms

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:48 +00:00
Ard Biesheuvel 582d5462b6 ArmPlatformPkg: remove unused PL35x driver
No platform uses this so remove it.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:44 +00:00
Ard Biesheuvel aa5eed375c ArmPlatformPkg: remove unused PL301Axi driver
No platforms use this driver so remove it.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:38 +00:00
Ard Biesheuvel eb618ba42f ArmPlatformPkg/LcdGraphicsOutputDxe: move headers into driver directory
The HdLcd.h and PL111Lcd.h header files are internal headers that should
not be used by other drivers. So move them from Include/Drivers into the
driver directory instead.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:32 +00:00
Ard Biesheuvel d9b5360860 ArmPlatformPkg: add missing library class declarations to .dec file
Add ArmPlatformLib, LcdPlatformlib and NorFlashPlatformLib to the
[LibraryClasses] section of ArmPlatformPkg.dec.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:28 +00:00
Ard Biesheuvel 1e6adaebdd ArmPlatformPkg: remove old PL011UartLib implementation
Remove the PL011UartLib implementation that has been superseded by
the one under Library/

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:22 +00:00
Ard Biesheuvel de4940885a ArmPlatformPkg: remove BootMonFs and ArmShellCmdRunAxf
These modules have been imported into edk2-platforms where they belong
so remove them from the main EDK2 branch.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:20 +00:00
Ard Biesheuvel bc52af3bf3 ArmPlatformPkg: remove ArmPlatformSysConfigLib library class
The only remaining user of ArmPlatformSysConfigLib has absorbed this
definition into its own edk2-platforms package, so let's remove it from
the shared code.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:30:16 +00:00
Ard Biesheuvel a913ad0247 ArmPlatformPkg: remove ArmVExpressPkg
Remove ArmVExpressPkg from EDK2 now that its contents have moved into
edk2-platforms/Platform/ARM where they belong.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:29:58 +00:00
Ard Biesheuvel 49adff289f ArmPlatformPkg: remove NorFlashArmVExpressLib
Remove NorFlashArmVExpressLib now that it has been moved into edk2-platforms
where it belongs.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-08 16:29:54 +00:00
Ard Biesheuvel c1c72a46b9 ArmPlatformPkg/LcdGraphicsOutputDxe: remove VExpressPkg dependency
The two instantiations of LcdGraphicsOutputDxe reference VExpressPkg.dec
without actually relying on anything it defines. In preparation of
moving out VExpressPkg into edk2-platforms, drop these references so we
can keep LcdGraphicsOutputDxe in EDK2.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-04 22:01:02 +00:00
Ard Biesheuvel 51a9af8050 ArmPlatformPkg: remove PlatformIntelBdsLib
Now that the last user has switched to the generic BDS, the
PlatformIntelBdsLib code in ArmPlatformPkg is no longer used, so
remove it.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2017-12-04 17:17:15 +00:00