Issue:
Reply for first ping packet was getting dropped.
Cause:
Sometimes reply message comes even before trasmit
function returns, hence missing 1st reply
Fix:
Prepare the TxList before calling Transmit function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in ShellPkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
Issue : We were setting MediaPresent as TRUE (default) and
not checking return status of NetLibDetectMedia().
NetLibDetectMedia() sets MediaPresent FLAG in case of success
only and dont change flag on error.
So, Media State will display as 'Media Present', in case of
error also.
Fix : Check return value of NetLibDetectMedia(), if error then
print "Media State Unknown"
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Found few instances where IPv4 and DHCPv4 spelled incorrectly
as IP4 and DHCP4 respectively.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Couple of instances had IP4 mentioned, instead of IPv4.
Changing all to IPv4 to maintain consistency.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
if we set a static IP using command
'ifconfig -s eth0 static 192.168.0.121 255.255.255.0 0.0.0.0'
The system says 'Failed to set address.' but using
'ifconfig -l', the static IP can be assigned successfully.
so we need to check the gateway validity before setting manual
address to keep the ifconfig -s command more consistent.
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2: update the prompt message more readable.
It should display error prompt message when Ifconfig6 can
not configure correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed by : Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The ping command uses PI CPU arch protocol to calculate the RTT time, which is
not allowed to use in UEFI shell. This patch updates it to use the UEFI timer
event and Stall service to estimate the system timer period.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
When we have intermittent loss of packets, ping command doesnt
return to Shell prompt. It keeps looping in the while (Status
==EFI_NOT_READY) since Private->RxCount will never reach
Private->SendNum. Addresses the issue with the use of a new varibale
in the PRIVATE structure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
v2:
* A. Refine the code to make it more readable.
* B. Add hint message for link local address case.
This patch is used to support no source IP specified case
while multiple NICs existed in the platform. The command
will select the first both connected and configured interface
automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: David Van Arnem <dvanarnem@cmlab.biz>
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch is used to update ping command options to sync
with shell2.2 Spec.
Considering the backward compatible issue, the patch keeps
‘-_s’ command option unchanged, only add the new option '-s'
and make the old option '-_s' function same as new one.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch is used to update ifconfig -r implementation
to sync with UEFI Shell 2.2.
option -r means to reconfigure all or specified interface,
and set DHCP policy. If specified interface is already set
to DHCP, then refresh the IPv4 configuration.
If the interface name is specified
with '-r', DHCP DORA process will be triggered by the policy
transition (static -> dhcp).
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
'd6cf1af9' is associated with '3d0a49ad' commit. So, this patch is
used to respond the revert for '3d0a49ad' to adapt the Ipv4 config
policy update.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This patch is used to fix ifconfig hang issue with incomplete
parameters. In addition, some error related output information
is added to increase the interactivity.
Cc: Leekha Shaveta <shaveta@freescale.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Tested-by: Leekha Shaveta <shaveta@freescale.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19212 6f19259b-4bc3-4df7-8a09-765794883524
v2:
* Update to use NetLibDetectMedia() directly.
This patch is used to get media status in ifconfig command.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18363 6f19259b-4bc3-4df7-8a09-765794883524
Some of the libraries under ShellPkg/Library/ are only intended to be
loaded into the Shell by means of a NULL LibraryClass resolution, and
serve no other purpose. Since the Shell itself is a UEFI_APPLICATION, it
makes sense to set the module type of those libraries to UEFI_APPLICATION
as well.
This allows us to use different compiler flags for the Shell application
itself but also for the majority of its constituent parts that are built
separately via these libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18310 6f19259b-4bc3-4df7-8a09-765794883524
R18201 fix caused ifconfig in shell failed to get the address from dhcp with the
command "ifconfig -s eth0 dhcp" since the default policy is dhcp already.
We can fix it by following the rule to starting the Ip4 auto configuration.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviwed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18244 6f19259b-4bc3-4df7-8a09-765794883524
EDK II C coding style requires use of 'm' or 'g' for module globals.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18184 6f19259b-4bc3-4df7-8a09-765794883524
Fix issue about ping fail with IPv4, which is caused by the incorrect
checksum in request message.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18167 6f19259b-4bc3-4df7-8a09-765794883524
that are assigned but never used afterwards.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17888 6f19259b-4bc3-4df7-8a09-765794883524
Updates to various profile commands help and error message output with better wordings.
Fix few inconsistency issues found in error messages across various profile commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17032 6f19259b-4bc3-4df7-8a09-765794883524
Updates to Network1 profile commands response output.
Updating Network1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16731 6f19259b-4bc3-4df7-8a09-765794883524
This patch replaces StrCat with StrnCat or refactors out the usage of StrCat through some other means.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16005 6f19259b-4bc3-4df7-8a09-765794883524
* Follow a consistent style
* Add consistent sections: NOTES, EXAMPLES, RETURN VALUES, etc.
* Wrap the text to fit in 80x25 formatted console output
* Remove excessive and very verbose examples output
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-By: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15986 6f19259b-4bc3-4df7-8a09-765794883524
2. Retrieve the IP information after iSCSI TCPv6 connection established and fill it into iBFT table.
3. Generate a random IAID for each NIC port to require different IPv6 address in PXE driver.
4. Update function EfiMtftp6Configure() and Mtftp6RrqHandleOack() to allocate at most one UdpIo.
5. Fix a typo from “destory” to “destroy” in network code.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13859 6f19259b-4bc3-4df7-8a09-765794883524