Build options for ARM64 are the same as for ARM, except for /BASE:0
which is removed from DLINK flags to avoid LNK1355 error:
invalid base address 0x0; ARM64 image cannot have base address below 4GB
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Clang's preprocessor behaves differently from GCC's, and produces
intermediate device tree source that still contains #pragma pack()
and other directives that the device tree compiler chokes on.
For assembling device tree sources, it matters very little which
preprocessor is being used, so let's just use GNU CPP explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We duplicate the Assembly-Code-File section from build_rule.template
because --convert-hex cannot be used with the MSFT ARM assembler.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
By default, the device tree compiler emits phandle properties twice:
once called 'phandle' and again called 'linux,phandle'. Given that
Linux was updated in early 2010 [0] to accept the former (which is
what is specified in the ePAPR and device tree specifications), there
is no point in emitting both when compiling device trees for UEFI
platforms.
[0] 04b954a673dd02f585a2769c4945a43880faa989
"of/flattree: Make the kernel accept ePAPR style phandle information"
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
While modern AARCH64 server systems use ACPI for describing the platform
topology to the OS, ARM systems and AARCH64 outside of the server space
mostly use device tree binaries, which are compiled from device tree
source files using the device tree compiler.
Currently, such source files and binaries may be kept in the EDK2 platform
trees, but are not integrated with the build, which means they need to be
kept in sync and recompiled manually, which is cumbersome.
So let's wire up BaseTools support for them: add tool definitions for the
DTC compiler and preprocessor flags that allow these source files to use
FixedPcd expressions and other macros defined by AutoGen.h
This way, a device tree binary can be built from source and emitted into
a FFS file automatically using something like:
DeviceTree.inf:
[Defines]
INF_VERSION = 0x00010019
BASE_NAME = SomePlatformDeviceTree
FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
MODULE_TYPE = USER_DEFINED
VERSION_STRING = 1.0
[Sources]
SomePlatform.dts
[Packages]
MdePkg/MdePkg.dec
SomePlatform.fdf:
INF RuleOverride = DTB xxx/yyy/DeviceTree.inf
[Rule.Common.USER_DEFINED.DTB]
FILE FREEFORM = $(NAMED_GUID) {
RAW BIN |.dtb
}
where it can be picked at runtime by the DTB loader that may refer to it
using gDtPlatformDefaultDtbFileGuid.
Note that this is very similar to how ACPI tables may be emitted into a
FFS file with a known GUID and picked up by AcpiTableDxe at runtime.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=582
Don't enable this option in the default setting, because it may cause VS2015
linker crash. Platform can enable this option in PlatformPkg.dsc like below:
[BuildOptions]
*_*_*_DLINK2_FLAGS = /WHOLEARCHIVE
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
BaseTools add support to generating image package from BMP/JPEG/PNG
files.
1) New file type *.idf Image definition file to describe HII image
resource. It is the ASCII text file, and includes one or more "#image
IMAGE_ID [TRANSPARENT] ImageFileName".
2) New IMAGE_TOKEN macro is used to refer to IMAGE_ID.
3) New AutoGen header file $(MODULE_NAME)ImgDefs.h to include the
generated ImageId definition.
4) New $(MODULE_NAME)Idf.hpk or $(MODULE_NAME)Images are generated
as the output binary HII image package.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 478f50990a ("BaseTools GCC: add the compiler flags to the linker
command line") added the compiler flags to the linker command line,
which is required for LTO to function correctly, since it involves code
generation at link time.
This patch failed to update the build rules for XIP modules on AARCH64,
which not only requires the ordinary CC flags but also the XIP CC flags
to prevent the LTO backend to, e.g., emit code that does not adhere to
the strict alignment rules we impose for code that may execute with the
MMU off.
So update the XIP link rules as well. Since AARCH64 and ARM are not
supported by any toolchains in the GCCLD build rule family, drop the
reference to GCCLD while we're at it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Both binutils ar and LLVM ar support "cr", but LLVM ar doens't
support add "-" in the flags, and llvm-ar cannot accept "-cr".
So remove the short dash "-" to make llvm archives work.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Given that we only support ARMv7 and up in Tianocore (due to the fact
that the PI spec mandates that the PEI services table pointer be stored
in the TPIDRURW register, which is not available on earlier CPUs), we can
assume that any code executing with the MMU on may perform unaligned
accesses (since the AArch32 bindings in the UEFI spec stipulate that
unaligned accesses should be allowed if supported by the CPU)
So relax the alignment restrictions to XIP modules only, i.e., BASE, SEC,
PEI_CORE and PEIM type modules, exactly like we do for AARCH64 already.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Now that we invoke GCC as the linker for the GCC toolchain family,
we can pass the CC flags to the linker as well. This is only
required for LTO (which may involve code generation during the link
stage), but does not interfere with non-LTO builds.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In order to be able to share the compiler flags with the linker (which
is required for LTO since it involves the linker doing code generation
based on the LTO bytecode), move the -c GCC argument to the build rules,
and drop it from the GCC CC_FLAGS definitions in tools_def.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Now that GenFw converts small code model ADRP instructions to ADR on
the fly, we can reduce the alignment for XIP modules, where large
alignment values may cause considerable waste of flash space due to
excessive padding. This limits the module size to 1 MB, but this is
not a concern in practice.
So set the XIP section alignment to 0x20 for DEBUG_GCC49, DEBUG_GCC5
and *_CLANG35, all of which use the small code model.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
To accommodate upcoming GCCx toolchain versions that require 'gcc' to
be used as the linker in order to support LTO, switch GCC44 and later
(including CLANG35) to a new DLINK build rule that invokes 'gcc' as the
linker instead of 'ld'. Since gcc expects its command line arguments in
a different format, and expects arguments that it needs to pass to the
linker to be prefixed with '-Wl,', this involves changes to most of the
DLINK_FLAGS definitions in tools_def.template, as well as some changes to
module .INF files that set their own linker options.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Before we can make non-backward compatible changes to the GCC build rules
regarding the use of the 'gcc' binary as the linker, clone the existing
GCC build rules into a 'GCCLD' build rule family, and move the legacy
toolchains UNIXGCC, CYGGCC, CYGGCCxASL and ELFGCC over to it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This introduces a special .c to .obj build rule for GCC/AARCH64 that
takes into account additional compiler flags that have been specified
via *_*_*_CC_XIPFLAGS. These will be passed after (and in addition to)
the ordinary CC_FLAGS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19637 6f19259b-4bc3-4df7-8a09-765794883524
The ARMGCC and ARMLINUXGCC toolchains are specific to the ARM and
AARCH64 architectures, and overlap with the toolchain configuration
that is provided by the GCC44 - GCC49 toolchains, which are defined
for all architectures.
To reduce the maintenance burden, and make it easier to keep these
different architectures aligned, remove the ARMGCC and ARMLINUXGCC
toolchains entirely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18212 6f19259b-4bc3-4df7-8a09-765794883524
The long value substitution must move to the front of
HEX substitution, and updated build_rule to add --trim-long
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18170 6f19259b-4bc3-4df7-8a09-765794883524
This patch makes sure the EFI file in $(BIN_DIR) is unique. If there are modules with same BaseName, the FILE_GUID is appended.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17608 6f19259b-4bc3-4df7-8a09-765794883524
*.nasmb is place of *.asm16. To keep the same output file, copy the output
file with .com postfix.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17580 6f19259b-4bc3-4df7-8a09-765794883524
For *.asm and *.s, there have been cases of *.Asm and *.S files, but
since the nasm extensions are new, we don't need to support the upper
case extensions.
In other words, remove .Nasm and .NASM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17544 6f19259b-4bc3-4df7-8a09-765794883524
Here is a new patch that adds Windows support for both gcc 4.8.x and gcc 4.9.x.
This time testing is more thorough: boot testing using Duet for all 4 combinations of
IA32/X64 and gcc 4.8.2 and gcc 4.9.1 passes. A Windows hosted gcc 4.8.2 has been added here:
http://sourceforge.net/projects/edk2developertoolsforwindows/
The environment variable settings for Windows look like:
set UEFI_BUILD_TOOLS=%cd%\tools
set NASM_PREFIX=%UEFI_BUILD_TOOLS%\nasm211\
set GCC48_BIN=%UEFI_BUILD_TOOLS%\gcc482-x86\bin\
set GCC48_DLL=%UEFI_BUILD_TOOLS%\gcc482-x86\dll\;%GCC48_BIN%
set GCC48_ARM_PREFIX=%UEFI_BUILD_TOOLS%\gcc482-arm\bin\
set GCC48_AARCH64_PREFIX=%UEFI_BUILD_TOOLS%\gcc482-aarch64\bin\
set GCC49_BIN=%UEFI_BUILD_TOOLS%\gcc491-x86\bin\
set GCC49_DLL=%UEFI_BUILD_TOOLS%\gcc491-x86\dll\;%GCC49_BIN%
set GCC49_ARM_PREFIX=%UEFI_BUILD_TOOLS%\gcc491-arm\bin\
set GCC49_AARCH64_PREFIX=%UEFI_BUILD_TOOLS%\gcc491-aarch64\bin\
No change is needed for building from Linux.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16400 6f19259b-4bc3-4df7-8a09-765794883524
v2:
* Use EDK II tool name of NASMB rather than NASMBIN
* Use EDK II extension of .nasmb rather than .nasmbin
v3:
* Create listing file
* Don't change into source directory
* Add ENV(NASM_PREFIX) before nasm for NASM_PATH
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15820 6f19259b-4bc3-4df7-8a09-765794883524
1. Fix !include issues
2. Fix Trim to skip the postfix 'U' for hexadecimal and decimal numbers
3. Fix building error C2733 when building C++ code.
4. Add GCC46 tool chain definition
5. Add new RVCT and RVCTLINUX tool chains
Signed-off-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12782 6f19259b-4bc3-4df7-8a09-765794883524