Add Atom MSRs from:
Intel(R) 64 and IA-32 Architectures Software Developer's
Manual, Volume 3, December 2015, Chapter 35
Model-Specific-Registers (MSR), Section 35-3.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
OpenSSL 1.0.2g was released with several severity fixes at
01-Mar-2016(https://www.openssl.org/news/secadv/20160301.txt).
Upgrade the supported OpenSSL version in CryptoPkg/OpensslLib to
catch the latest release 1.0.2g.
(NOTE: RT4175 from David Woodhouse was included in 1.0.2g. The
new-generated patch will remove this part. And the line
endings were still kept as before in this version for
consistency)
CC: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Until we fix the git repository to store line endings properly and then
just check them out in the appropriate form for the platform, let's make
process_files.sh convert the opensslconf.h to DOS line endings when it
creates it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
Unlike Linux on x86, which typically honors the PCI configuration performed
by the firmware, Linux on ARM assumes that the PCI subsystem needs to be
configured from scratch. This is not entirely unreasonable given the
historical background of embedded systems using very basic bootloaders,
but is no longer tenable with Linux on arm64 moving to UEFI and ACPI in the
server space. For this reason, PCI support in the arm64 kernel running under
ACPI is likely to move to the x86 model of honoring the PCI configuration
done by the firmware.
So let's align with that in our DT based configuration as well, and set the
/chosen/linux,pci-probe-only property to 1 in the Device Tree before we
hand it to the OS.
In case we are exposing an emulated VGA PCI device to the guest, which may
subsequently get exposed via the Graphics Output protocol and driven as an
efifb by the OS, this ensures the PCI resource allocations for the framebuffer
are not overridden, since that would cause the framebuffer to stop working.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Some commands in DxeTcg2PhysicalPresenceLib accept
AuthSession as input parameter and copy to local
command buffer. After use, this AuthSession content
should be zeroed, because there might be some secrete
there.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Tpm2Ptp.c is library, but it miss Tpm2 prefix for
IsPtpPresence() and GetPtpInterface(). There might
be risk as name symbol conflict. This patch adds Tpm2
prefix for them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Tested-by: "Wu, Hao A" <hao.a.wu@intel.com>
Tcg2PhysicalPresenceLibSubmitRequestToPreOSFunction()
has check if current request is same as previous.
But it forget check RequestParameter, which causes
second request fail to process, if RequestParameter
is different.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
Update the mail address from edk2-devel@lists.sourceforge.net to
edk2-devel@lists.01.org.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Since PcdHiiOsRuntimeSupport has added in the MdeModulePkg.dec file,
now add the usage information in the uni file.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
This issue is caused by the string token ID for help message,
which is defined in the internal head file.
This head file is used for reference more than once. So,
multiple definition for the string token ID error will be
enrolled.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Zhang, Lubo <lubo.zhang@intel.com>
By now OVMF makes MdeModulePkg/Bus/Pci/PciHostBridgeDxe go through
MMCONFIG (when running on Q35). Enable the driver to address each B/D/F's
config space up to and including offset 0xFFF.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
If USE_OLD_PCI_HOST is FALSE, then we switch all executable module types
supported by DxePciLibI440FxQ35 to the following library instance stack:
BasePciSegmentLibPci [class: PciSegmentLib]
DxePciLibI440FxQ35 [class: PciLib]
BasePciCf8Lib [class: PciCf8Lib]
BasePciExpressLib [class: PciExpressLib]
Every module will select 0xCF8 vs. ECAM based on the OVMF platform type
(i440fx or Q35). Notably, MdeModulePkg/Bus/Pci/PciHostBridgeDxe is among
the affected drivers.
The BasePciExpressLib instance is where the PcdPciExpressBaseAddress PCD
fills its original role.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
This library is a trivial unification of the following two PciLib
instances (and the result is easily diffable against each):
- MdePkg/Library/BasePciLibCf8
- MdePkg/Library/BasePciLibPciExpress
The PCI config access method is determined in the constructor function,
from the dynamic PCD "PcdOvmfHostBridgePciDevId" that is set by
PlatformPei.
The library instance is usable in DXE phase or later modules: the PciLib
instances being unified have no firmware phase / client module type
restrictions, and here the only PCD access is made in the constructor
function. That is, even before a given client executable's entry point is
invoked.
The library instance depends on PlatformPei both for setting the PCD
mentioned above, and also for enabling MMCONFIG on Q35. PEI and earlier
phase modules are not expected to need extended config access even on Q35.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
The comments in the code should speak for themselves; here we note only
two facts:
- The PCI config space writes (to the PCIEXBAR register) are performed
using the 0xCF8 / 0xCFC IO ports, by virtue of PciLib being resolved to
BasePciLibCf8. (This library resolution will permanently remain in place
for the PEI phase.)
- Since PCIEXBAR counts as a chipset register, it is the responsibility of
the firmware to reprogram it at S3 resume. Therefore
PciExBarInitialization() is called regardless of the boot path. (Marcel
recently posted patches for SeaBIOS that implement this.)
This patch suffices to enable PCIEXBAR (and the dependent ACPI table
generation in QEMU), for the sake of "PCIeHotplug" in the Linux guest:
ACPI: MCFG 0x000000007E17F000 00003C
(v01 BOCHS BXPCMCFG 00000001 BXPC 00000001)
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff]
(base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
acpi PNP0A08:00: _OSC: OS supports
[ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls
[PCIeHotplug PME AER PCIeCapability]
In the following patches, we'll equip the core PCI host bridge / root
bridge driver and the rest of DXE as well to utilize ECAM on Q35.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Ref: http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/10548
Suggested-by: Marcel Apfelbaum <marcel@redhat.com>
Reported-by: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Gerd has advised us that long term support Q35 machine types have no low
RAM above 2GB, hence we should utilize the [2GB, 3GB) gap -- that we
currently leave unused -- for MMIO. (Plus, later in this series, for the
PCIEXBAR too.)
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/8707/focus=8817
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Section 5.1.16 ("PCIEXBAR -- PCI Express Register Range Base Address") in
Intel document #316966-002 (already referenced near the top of this header
file) describes the Q35 DRAM Controller register that configures the
memory-mapped PCI config space (also known as MMCONFIG, and ECAM /
Enhanced Configuration Access Method).
In this patch we add the macros we'll need later. We'll only support the
256 MB memory-mapped config space -- enough for buses [0, 255].
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
The script is updated to support both python 2.7 and python 3.
v2:
* Use io.open() rather than open() (Jaben)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Convert to use the argparse library rather than optparse.
As part of the conversion, the script will now give an error message
if no arguments are given. Previously the script would give an
exception when no arguments were given.
Fixes: https://github.com/tianocore/edk2/issues/65
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The script previously would hit an exception if it was run outside of
a git tree.
The exception looked like:
edk2/BaseTools/Scripts/ConvertMasmToNasm.py Version 0.01
Traceback (most recent call last):
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 986, in <module>
ConvertAsmApp()
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 984, in __init__
ConvertAsmFile(src, dst, self)
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 209, in __init__
CommonUtils.__init__(self, clone)
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 69, in __init__
self.gitemail = clone.gitemail
AttributeError: ConvertAsmApp instance has no attribute 'gitemail'
Fixes: https://github.com/tianocore/edk2/issues/63
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Instead of only handling SEC Core or PEI Core instances in the outer FV,
the GenFv tool will now recurse into FV image FFS files to look for instances
in encapsulated FVs so the vector area can be updated appropriately.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For VOID* Pcd with {} value, If platform developer wants to put in a
specific hex offset value that is not 8-byte aligned for VOID * then we
allow it with a warning message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
After submitting changes for HttpLib, other modules should be able to use
those functions
1 remove the private function and their calls
2 update it with the functions from httpLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ghazi Belaam <Ghazi.belaam@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
There some usefull functions in edk2 private modules that could be used,
so we added them to the httpLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ghazi Belaam <Ghazi.belaam@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
gMaximumBasicFunction is set to CPUID_SIGNATURE as below, so removed the compare code.
UINT32 gMaximumBasicFunction = CPUID_SIGNATURE;
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
UefiCpuPkg/Application/Cpuid: Remove unnecessary code check
gMaximumBasicFunction is set to CPUID_SIGNATURE as below, so removed the compare code.
UINT32 gMaximumBasicFunction = CPUID_SIGNATURE;
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
UefiCpuPkg/Application/Cpuid: Remove unnecessary code check
gMaximumBasicFunction is set to CPUID_SIGNATURE as below, so removed the compare code.
UINT32 gMaximumBasicFunction = CPUID_SIGNATURE;
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Use DOS format end of line(CR, LF).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This patch makes sure the MODULE_DIR variable points to the correct
location when multiple workspaces are used. Currently, it is
always prefixed with $(WORKSPACE), which only works as long as the
package is in the Workspace.
Code modules were not effected because the required paths were valid,
but for custom Makefiles, the MODULE_DIR variable is used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The maximum number of PEI performance log entries is 255.
Add a new PCD, PcdMaxPeiPerformanceLogEntries16, to increase the maximum
number of PEI performance log entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Joseph Shifflett <joseph.shifflett@hpe.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Enable the network2 commands when NETWORK_IP6_ENABLE is TRUE, so we
would have Ping6 and Ifconfig6.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
[lersek@redhat.com: added the word "Shell" to the subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Some static scan tool may regard CurrentRsdtEntry to be potentially
referenced to NULL pointer if CurrentRsdtEntry == NULL is used in
the right above if condition judgment.
CopyMem (CurrentRsdtEntry, CurrentRsdtEntry + 1, (*NumberOfTableEntries - Index) * sizeof (UINT32));
It is introduced by commit f9bbb8d9c3.
To avoid it and have same style with
"((Xsdt == NULL) || CurrentTablePointer64 == (UINT64) (UINTN) Table->Table)",
use Rsdt instead of CurrentRsdtEntry to check against NULL.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/IoFifo.asm to X64/IoFifo.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/IoFifo.asm to Ia32/IoFifo.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit fa848a4048 ("NetworkPkg: Add URI configuration form to HTTP boot
driver") causes the build to fail with gcc:
> NetworkPkg/HttpBootDxe/HttpBootConfig.c: In function
> 'HttpBootAddBootOption':
> NetworkPkg/HttpBootDxe/HttpBootConfig.c:148:14:
> error: passing argument 3 of 'GetVariable2' from incompatible pointer
> type [-Werror]
> );
> ^
> In file included from NetworkPkg/HttpBootDxe/HttpBootDxe.h:31:0,
> from NetworkPkg/HttpBootDxe/HttpBootConfig.c:15:
> MdePkg/Include/Library/UefiLib.h:708:1: note: expected 'void **' but
> argument is of type 'CHAR16 **'
> GetVariable2 (
> ^
> cc1: all warnings being treated as errors
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The patch enhances the UefiBootManagerLib to use more user-friendly
network boot option description.
It builds description like below:
"PXEv6 (MAC:112233445566 VLAN1)"
"HTTPv4 (MAC:112233445566)"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>