https://bugzilla.tianocore.org/show_bug.cgi?id=4035
64bit FSP FV map file cannot be created correctly when using CLANG
compiler. When compiling 64bit FSP with CLANG, there is no prefix
symbol '_' added to function name. Hence FSP FV map file cannot be
created properly. Updated the if condition for CLANG in GenFv to
get the issue fixed.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Lee Hamel <lee.m.hamel@intel.com>
Signed-off-by: Ted Kuo <ted.kuo@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Rebecca reports that builds of AArch64 DSCs that involve PIE linking
when using ELF based toolchains are failing in some cases, resulting in
an error message like
bad definition for symbol '_GLOBAL_OFFSET_TABLE_'@0x72d8 or
unsupported symbol type. For example, absolute and undefined symbols
are not supported.
The reason turns out to be that, while GenFw does carry some logic to
convert GOT based symbol references into direct ones (which is always
possible given that our ELF to PE/COFF conversion only supports fully
linked executables), it does not support all possible combinations of
relocations that the linker may emit to load symbol addresses from the
GOT.
In particular, when performing a non-LTO link on object code built with
GCC using -fpie, we may end up with GOT based references such as the one
below, where the address of the GOT itself is taken, and the offset of
the symbol in the GOT is reflected in the immediate offset of the
subsequent LDR instruction.
838: adrp x0, 16000
838: R_AARCH64_ADR_PREL_PG_HI21 _GLOBAL_OFFSET_TABLE_
83c: ldr x0, [x0, #2536]
83c: R_AARCH64_LD64_GOTPAGE_LO15 _gPcd_BinaryPatch_PcdFdBaseAddress
The reason that we omit GOT based symbol references when performing ELF to
PE/COFF conversion is that the GOT is not described by static ELF
relocations, which means that the ELF file lacks the metadata to
generate the PE/COFF relocations covering the GOT table in the PE/COFF
executable. Given that none of the usual motivations for using a GOT
(copy on write footprint, shared libraries) apply to EFI executables in
the first place, the easiest way around this is to convert all GOT based
symbol address loads to PC relative ADR/ADRP instructions.
So implement this handling for R_AARCH64_LD64_GOTPAGE_LO15 and
R_AARCH64_LD64_GOTOFF_LO15 relocations as well, and turn the LDR
instructions in question into ADR instructions that generate the
address immediately.
This leaves the reference to _GLOBAL_OFFSET_TABLE_ itself, which is what
generated the error to begin with. Considering that this symbol is never
referenced (i.e., it doesn't appear anywhere in the code) and is only
meaningful in combination with R_*_GOT_* based relocations that follow
it, we can just disregard any references to it entirely, given that we
convert all of those followup relocations into direct references.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Acked-by: Bob Feng <bob.c.feng@intel.com>
On macOS, /usr/bin/gcc is clang, and so doesn't have
the -Wno-error=stringop-overflow flag that was added
for gcc 12.
Update the GNUmakefile for DevicePath to skip setting
that on macOS.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4021
When the size of a EFI_SECTION_FREEFORM_SUBTYPE_GUID section required
the use of EFI_FREEFORM_SUBTYPE_GUID_SECTION2 header, set the section
type to EFI_SECTION_FREEFORM_SUBTYPE_GUID.
Cc: Leif Lindholm <llindhol@qti.qualcomm.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Konstantin Aladyshev <aladyshev22@gmail.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Leif Lindholm <llindhol@qti.qualcomm.com>
The GenFw invocation with the --prm flag was previously reserved for
X64.
AArch64 platforms, built with GCC5, can also deploy PRM modules, hence
the --prm flag is also applicable in builds targeting the AARCH64
architecture.
This commit enables the --prm flag to be used for EDK2 builds targeting
AARCH64.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Print 'SubtypeGuid' field from the EFI_FREEFORM_SUBTYPE_GUID_SECTION
structure.
This value describes the raw data inside the section.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
Currently there is no labels for start and end of the
EFI_SECTION_FIRMWARE_VOLUME_IMAGE type section. Therefore it is not
possible to see where the FV section ends and another section starts.
Add labels for start and end of the FV sections to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently there is no labels for start and end of the encapsulation
sections. Therefore it is not possible to see where the encapsulation
section ends and another section starts.
Add labels for start and end of encapsulation sections to fix the
issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
- Correct typo in print statement,
- "BuildNumber" field is UINT16, therefore it needs "0x%04X" format
modifier,
- "VersionString" field is CHAR16, therefore the input data should be
processed to be displayed with "%s" printf modifier.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently sections with unknown types are displayed as
`EFI_SECTION_SMM_DEPEX` which is wrong.
Increase the highest value for the section type to 0x1C
for correct parsing.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Alignment attribute is not a bitmask, therefore we need to compare
field value with all alignment defines.
Remove duplicate print statements. Unify indent with other attribute
print statements.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
In function ?SetDevicePathEndNode?,
inlined from ?FileDevicePath? at DevicePathUtilities.c:857:5:
DevicePathUtilities.c:321:3: error: writing 4 bytes into a region of size 1 [-Werror=stringop-overflow=]
321 | memcpy (Node, &mUefiDevicePathLibEndDevicePath, sizeof (mUefiDevicePathLibEndDevicePath));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from UefiDevicePathLib.h:22,
from DevicePathUtilities.c:16:
../Include/Protocol/DevicePath.h: In function ?FileDevicePath?:
../Include/Protocol/DevicePath.h:51:9: note: destination object ?Type? of size 1
51 | UINT8 Type; ///< 0x01 Hardware Device Path.
| ^~~~
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Sdk/C/LzmaEnc.c: In function ?LzmaEnc_CodeOneMemBlock?:
Sdk/C/LzmaEnc.c:2828:19: error: storing the address of local variable ?outStream? in ?*p.rc.outStream? [-Werror=dangling-pointer=]
2828 | p->rc.outStream = &outStream.vt;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?outStream? declared here
2811 | CLzmaEnc_SeqOutStreamBuf outStream;
| ^~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?pp? declared here
Sdk/C/LzmaEnc.c:2828:19: error: storing the address of local variable ?outStream? in ?*(CLzmaEnc *)pp.rc.outStream? [-Werror=dangling-pointer=]
2828 | p->rc.outStream = &outStream.vt;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?outStream? declared here
2811 | CLzmaEnc_SeqOutStreamBuf outStream;
| ^~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?pp? declared here
cc1: all warnings being treated as errors
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3802
Since PRM module needs to support export table in PE-COFF, we'll
enhance GenFw tool to support this.
Add one export flag in GenFw tool. If export flag is set:
Step1: Scan ELF symbol table based on PRM module descriptor to get
descriptor offset address;
Step2: Find PRM handlers number and name in COFF file based on the
address from step1;
Step3: Write PRM info such as handler name and export RVA into COFF
export table.
PRM option currently only supports DXE RUNTIME driver and X64 arch.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Lixia Huang <lisa.huang@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3D3417
Update the brotli submodule to the latest commit (f4153a0)
so that the build isn't broken in GCC 11 compilers.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3752
Add Bit mask to numeric/one of opcode to set correctly Flags for Bit Field.
VfrSyntax.g: Set "LFlags &= EDKII_IFR_DISPLAY_BIT" before "LFlags |= (EDKII_IFR_NUMERIC_SIZE_BIT & (_GET_CURRQEST_VARSIZE()));"
VfrFormPkg.h: update "if (LFlags & EFI_IFR_DISPLAY)" with "if (LFlags & EDKII_IFR_DISPLAY_BIT)" in SetFlagsForBitField()
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Long1 Huang <long1.huang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Currently the PCD Value only support 13 Guid,When use more 13 pcd will cause the build tool fail,
Need calculate the required memory,then allocate it.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3718
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Xiaolu Jiang <xiaolu.jiang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3687
If a C structure parsed by the VFR compiler contains an unnamed
field, then mFieldName is left uninitialized, which generates
random data in the VFR compiler output file.
If the FieldName is NULL, then initialize pNewField->mFieldName
to a Null-terminated empty string.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Change GenFv for Arm architecture to generate a specific jump
instruction as image entry instruction, when the target entry label
is assembled with Thumb instruction set. This is possible since
SecCoreEntryAddress value fetched from the PE32 has its LSBit set when
the entry instruction executes in Thumb mode.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3459
This patch adds support for R_RISCV_PCREL_LO12_S relocation type.
The logic is same as existing R_RISCV_PCREL_LO12_I relocation
except the difference between load vs store instruction formats.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Pete Batard <pete@akeo.ie>
Cc: Abner Chang <abner.chang@hpe.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Acked-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3096
This patch adds support for R_RISCV_CALL_PLT and R_RISCV_GOT_HI20
relocations generated by PIE enabled compiler. This also needed
changes to R_RISCV_32 and R_RISCV_64 relocations as explained in
https://github.com/riscv/riscv-gnu-toolchain/issues/905#issuecomment-846682710
Testing:
1) Debian GCC 8.3.0 and booted sifive_u and QMEU virt models.
2) Debian 10.2.0 and booted QEMU virt model.
3) riscv-gnu-tool chain 9.2 and booted QEMU virt model.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Tested-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
This is the fix of the regression issue at c6b872c6.
Based on ELF spec, readonly alloc section is .rodata section. It is used.
This fix is to add back original check logic for ELF section. Now,
the readonly alloc section and execute alloc section are regarded as .text.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Commit c6b872c updates GenFw base code attribute to find .text section.
With GCC49 tool chain, aslc file is compiled into elf image.
But, its text section has no CODE attribute. So, it can't be detected
by new GenFw tool.For this type file. its text section is not required.
Its data section will be converted to acpi table.
This fix is to remove assert check when the generated image is ACPI data.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Leif Lindholm <leif@nuviainc.com>
CLANG8ELF tool chain generated ELF image with the different attributes
in section. Update GenFw to handle them.
1. .text section with writable attribute (support)
2. .reloc section has the symbol for *ABS* (skip)
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2946
Currenly, when using the Brotli tool to compress data, the output
compressed binary file does not record complete compressed data
when size of input file is too large, which makes the data loss and
will trigger decompress-check issue.
The Brotli document mentioned:
The brotli tool use BrotliEncoderCompressStream method to compresses
input stream to output stream. Under some circumstances (e.g. lack of
output stream capacity) the BrotliEncoderOperation would require
several calls to BrotliEncoderCompressStream. The method must be
called again until both input stream is depleted and encoder has no
more output after the method is called.
This patch fixes this issue based on the Brotli document.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3308
The EDK II Build Specifications do not restrict the set of
CPU architectures that can be supported. Remove places in
the EDK II that assume a fixed set of CPU architectures.
Remove build breaks in the following tools when a check against
a fixed set of CPU architectures is made.
* GenFw
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Abner Chang <abner.chang@hpe.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3165
There are 2 reasons to convert Split tool from C to Python.
1. We are in the process of moving the Basetools Python code
to a separate repository. But there still are many C tools under
edk2/BaseTools. To make all Basetools be in the separate repo,
we can convert the C tools to Python tools.
2. The original Split tool is very slow. This python tool can reduce
90% time.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3032
We had a build fail due to the hard coded MAX_LONG_FILE_PATH value.
We should use PATH_MAX if it is available.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Enze Zhu <zhuenze@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
As the condition of while statement is argc > 0, so argc < 1 will always
be false, it's redundant.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
When Alignment < 0x400 is false, the expression of Alignment >= 0x400 is
always true. So extract the expression from the else if statement.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2946
This is the regression issue in BaseTools BrotliCompress after Brotli
is changed to submodule. BrotliCompress should store the source size
and scratch buffer size into the header of the compressed binary data.
But now, BrotliCompress doesn't store them. So, BrotliDecompress
can't work.
To fix this issue, BrotliCompress tool main() function should be provided.
It needs to support the options of -e, -d, -o file, -g gap, -q level.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add REST_STYLE support on VFR language
BZ: 2916
https://bugzilla.tianocore.org/show_bug.cgi?id=2916
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Signed-off-by: Ye Ting <ting.ye@intel.com>
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: Wang Fan <fan.wang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2977
For a source-level BIOS debugger the .map files are quite useful with one
major shortcoming: the debugger cannot know, solely from the .map file,
the format (PE/COFF vs. TE) of the image included in the final BIOS ROM
Add Type=PE or TE in the map file
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
On windows system, when use command chcp displays the number of the
active console code page, if the active console code is 936, run
make cleanall in the BaseTools will hang.
Issue reproduce step:
chcp 936
edksetup.bat VS2015
cd BaseTools
nmake cleanall
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3001
When the 64-bit version of VS compiler is used, the generated
PcdValueInit tool will be failed to compile.
This patch is going to fix that issue.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2938
C tool may add the additional INC include path. They should have
high priority than the common INC include path.
This fix is to resolve the structure PCD issue to refer to the same
header file defined in BaseTools and MdePkg. The one in MdePkg should
be used.
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2938
MdePkg Acpi10.h definition depends on PACKED.
When structure PCD refers to Acpi10.h, build will fail,
because PACKED definition is missing in BaseTools BaseTypes.h.
C source tools include BaseTools BaseTypes.h. They don't include MdePkg Base.h.
When C source tools include MdePkg Acpi10.h, they also need PACKED definition.
So, add PACKED definition into BaseTools BaseTypes.h.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2349
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:2864 GCC build fails due to variable self assignment.
This local variable is not used at any where, we can just remove it.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2842
To use LLVM to build BaseTools, first set the CLANG_BIN environment value,
and add "CXX=llvm" to choose LLVM compiler set when using make command.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2790
If the top FFS is placed in FV image, current FV will show there is no space.
In fact, the pad ffs in FV image can be regarded as the spare space.
This change reports the max pad ffs size as the spare space for use.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Provided a mechanism for UEFI FW to identify and hand off bootable
NVDIMM namespaces to the OS by standardizing the EFI device path.
EFI device path for physical NVDIMM devices changed from an ACPI
_ADR device to an ACPI NVDIMM device for correctness.
(UEFI 2.8 mantis 1858)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Kuo, Ted
Ard Biesheuvel
Rebecca Cran
Michael D Kinney
Jose Marinho
Konstantin Aladyshev
Rebecca Cran
Feng, Bob C
Gerd Hoffmann
Huang, Li-Xia
Huang, Long1
Jiang, Xiaolu
Etienne Carriere
Sunil V L
gaoliming
Chen, Christine
Liu, WeiX C
Enze Zhu
wenyi,xie via groups.io
Yunhua Feng
Abner Chang
Nikita
Liu, Zhiguang
Liming Gao
Oleksiy Yakovlev