In commit 5b2291f956 ("OvmfPkg: QemuVideoDxe uses
MdeModulePkg/FrameBufferLib"), QemuVideoDxe was rebased to
FrameBufferBltLib.
The FrameBufferBltLib instance added in commit b1ca386074
("MdeModulePkg: Add FrameBufferBltLib library instance") logs many
messages on the VERBOSE level; for example, a normal boot with OVMF can
produce 500+ "VideoFill" messages, dependent on the progress bar, when the
VERBOSE bit is set in PcdDebugPrintErrorLevel. While FrameBufferBltLib is
certainly allowed to log such messages on the VERBOSE level, we should
separate those frequent messages from the (infrequent) ones produced by
QemuVideoDxe itself.
QemuVideoDxe logs VERBOSE messages in three locations (in two functions)
at the moment. All of them are infrequent: both QemuVideoBochsModeSetup()
and InstallVbeShim() are called from QemuVideoControllerDriverStart(),
that is, when a device is bound. Upgrade these messages to INFO level, so
that VERBOSE can be disabled in PcdDebugPrintErrorLevel -- perhaps
selectively for OvmfPkg/QemuVideoDxe -- without hiding these infrequent
messages.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This field is (re)allocated in QemuVideoGraphicsOutputSetMode(), released
in QemuVideoGraphicsOutputDestructor(), and used for nothing else. Remove
it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This field is never used.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Thanks to the previous patch, this field is also unnecessary now. Remove
it.
The patch is best reviewed with "git show --word-diff".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This field is never used beyond assignment and debug-logging. Remove it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Correct some typos (discovered with the codespell utility)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The PCI (Vendor ID, Device ID) pair (0x1af4, 0x1050) stands for both the
virtio-vga and the virtio-gpu-pci device models of QEMU. They differ in
two things:
- the former has a VGA-compatibility linear framebuffer on top of the
latter,
- the former has PCI_CLASS_DISPLAY_VGA device class, while the latter has
PCI_CLASS_DISPLAY_OTHER.
In commit 94210dc95e ("OvmfPkg: QemuVideoDxe: add virtio-vga support"),
we enabled QemuVideoDxe to drive virtio-vga simply by adding its (Vendor
ID, Device ID) pair to gQemuVideoCardList. This change inadvertently
allowed QemuVideoDxe to bind virtio-gpu-pci, which it cannot drive though.
Restrict QemuVideoDxe to PCI_CLASS_DISPLAY_VGA, in order to exclude
virtio-gpu-pci. For the other cards that QemuVideoDxe drives, this makes
no difference. (Note that OvmfPkg's PlatformBootManagerLib instance has
always only added PCI_CLASS_DISPLAY_VGA devices to ConOut; see
DetectAndPreparePlatformPciDevicePath().)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Fixes: 94210dc95e
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Qemu commit c5d4dac ("virtio-vga: add virtio gpu device with vga
compatibility") enables OVMF to drive the virtio-vga device:
The vga compatibility part of virtio-vga is identical to the qemu
standard vga, so supporting that is as easy as adding the PCI ID
to the list.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: subject fixup and QEMU commit reference in commit msg]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17690 6f19259b-4bc3-4df7-8a09-765794883524
The only feature not portable to ArmVirtualizationQemu is the VBE shim;
make that dependent on Ia32 / X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Olivier Martin <Olivier.martin@arm.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16890 6f19259b-4bc3-4df7-8a09-765794883524
The SegmentC local variable has type EFI_PHYSICAL_ADDRESS for (justified)
style reasons. However, the 64-bit bit-shifts that it undergoes result in
intrinsic calls when built with VS2010 for Ia32 / NOOPT.
The concrete value of SegmentC, 0xC0000, and the results of the bitops
that are based on it, are statically computeable. Cast SegmentC to UINT32
before subjecting it to bitwise operations; we can see in advance that
this won't lead to range loss.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
[lersek@redhat.com: dropped now superfluous outermost parens; commit msg]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16385 6f19259b-4bc3-4df7-8a09-765794883524
When setting up the list of GOP modes offered on QEMU's stdvga ("VGA") and
QXL ("qxl-vga") video devices, QemuVideoBochsModeSetup() filters those
modes against the available framebuffer size. (Refer to SVN r15288 / git
commit ec88061e.)
The VBE_DISPI_INDEX_VIDEO_MEMORY_64K register of both stdvga and QXL is
supposed to report the size of the drawable, VGA-compatibility
framebuffer. Instead, up to and including qemu-2.1, this register actually
reports the full video RAM (PCI BAR 0) size.
In case of stdvga, this happens to be correct, because on that card the
full PCI BAR 0 is usable for drawing; there is no difference between
"drawable framebuffer size" and "video RAM (PCI BAR 0) size".
However, on the QXL card, only an initial portion of the video RAM is
suitable for drawing, as compatibility framebuffer; and the value
currently reported by VBE_DISPI_INDEX_VIDEO_MEMORY_64K overshoots the
valid size. Beyond the drawable range, the video RAM contains buffers and
structures for the QXL guest-host protocol.
Luckily, the size of the drawable QXL framebuffer can also be read from a
register in the QXL ROM BAR (PCI BAR 2), so let's retrieve it from there.
Without this fix, OVMF offers too large resolutions on the QXL card (up to
the full size of the video RAM). If a GOP client selects such a resolution
and draws into the video RAM past the compatibility segment, then the
guest corrupts its communication structures (which is invalid guest
behavior).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15978 6f19259b-4bc3-4df7-8a09-765794883524
The Windows 2008 R2 SP1 (and Windows 7) UEFI guest's default video driver
dereferences the real mode Int10h vector, loads the pointed-to handler
code, and executes what it thinks to be VGA BIOS services in an internal
real-mode emulator. Consequently, video mode switching doesn't work in
Windows 2008 R2 SP1 when it runs on the pure UEFI build of OVMF, making
the guest uninstallable.
This patch adds a VGABIOS "shim" to QemuVideoDxe. For the first stdvga or
QXL card bound, an extremely stripped down VGABIOS imitation is installed
in the C segment. It provides a real implementation for the few services
that are in fact necessary for the win2k8r2sp1 UEFI guest, plus some fakes
that the guest invokes but whose effect is not important.
The C segment is not present in the UEFI memory map prepared by OVMF. We
never add memory space that would cover it (either in PEI, in the form of
memory resource descriptor HOBs, or in DXE, via gDS->AddMemorySpace()).
This way the handler body is invisible to all non-buggy UEFI guests, and
the rest of edk2.
The Int10h real-mode IVT entry is covered with a Boot Services Code page,
making that too unaccessible to the rest of edk2. (Thus UEFI guest OSes
different from the Windows 2008 family can reclaim the page. The Windows
2008 family accesses the page at zero regardless of the allocation type.)
The patch is the result of collaboration:
Initial proof of concept IVT entry installation and handler skeleton (in
NASM) by Jordan Justen.
Service tracing and implementation, data collection/analysis, and C coding
by yours truly.
Last minute changes by Gerd Hoffmann:
- Use OEM mode number (0xf1) instead of standard 800x600 mode (0x143). The
resolution of the OEM mode (0xf1) is not standardized; the guest can't
expect anything from it in advance.
- Use 1024x768 rather than 800x600 for more convenience in the Windows
2008 R2 SP1 guest during OS installation, and after normal boot until
the QXL XDDM guest driver is installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15540 6f19259b-4bc3-4df7-8a09-765794883524
If Start() succeeds, the callback is only executed when the setup is
complete (on the stack of RestoreTPL()), rather than on the stack of
InstallMultipleProtocolInterfaces(), when the driver setup may yet be
theoretically incomplete.
If Start() fails, the protocol interface will have been uninstalled
(rolled back) by the time the callback runs (again, on the stack of
RestoreTPL()). Since protocol notification callbacks begin with locating
the protocol interface in question, such attempts to locate will fail
immediately and save some work in the callback.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15371 6f19259b-4bc3-4df7-8a09-765794883524
This brings the list of BOCHS video modes to par with the QEMU QXL
implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15289 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch we'll add many new BOCHS modes, some of which require
large frame buffers.
The size of the QXL VGA compatibility framebuffer can be changed with the
-global qxl-vga.vgamem_mb=$NUM_MB
QEMU option.
If $NUM_MB would exceed 32, then the following two QEMU options are
necessary instead:
-global qxl-vga.vgamem_mb=$NUM_MB \
-global qxl-vga.ram_size_mb=$((NUM_MB*2))
because the compatibility framebuffer can't cover more than half of PCI
BAR #0. The latter defaults to 64MB in size, and is controlled by
"ram_size_mb".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15288 6f19259b-4bc3-4df7-8a09-765794883524
The field name "ModeNumber" in QEMU_VIDEO_MODE_DATA is misleading -- it is
not immediately obvious whether this field carries a client-visible mode
number, in the GOP sense, or an internal, card type specific mode index.
After checking all references, rename the field to "InternalModeIndex".
Also, when filling in the card type independent QEMU_VIDEO_MODE_DATA array
from the card type specific mode array, distinguish the GOP mode number
from the internal mode index in the debug message.
This patch effects no functional changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15287 6f19259b-4bc3-4df7-8a09-765794883524
Currently, QemuVideoGraphicsOutputQueryMode() reports EFI_NOT_STARTED when
this boolean field is set.
However, QemuVideoGraphicsOutputQueryMode() is only available to callers
after the GOP interface has been installed. That in turn implies that the
following partial call tree has succeeded without errors:
QemuVideoControllerDriverStart()
QemuVideoGraphicsOutputConstructor()
QemuVideoGraphicsOutputSetMode(... 0 ...)
HardwareNeedsStarting = FALSE
InstallMultipleProtocolInterfaces(... GOP ...)
That is, when QemuVideoGraphicsOutputQueryMode() is reached,
HardwareNeedsStarting is always FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15286 6f19259b-4bc3-4df7-8a09-765794883524
A bus driver needs to pay attention whether its Stop() function is being
called on the "main" controller handle (NumberOfChildren == 0) or on the
child handles (NumberOfChildren > 0).
In QemuVideoDxe, all our resources are associated with the one child
handle (and the Private data structure) *except* the top-level PciIo
protocol reference. Be conscious of which mode Stop() is being called for.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15284 6f19259b-4bc3-4df7-8a09-765794883524
A bus driver is allowed to ignore the actual value of RemainingDevicePath
in Supported() and Start(), and to produce all child handles at once.
This in effect means the following invariants for QemuVideoDxe:
- (RemainingDevicePath == NULL), and
- (Private->GopDevicePath != NULL)
Simplify Supported() and Start() by substituting constant TRUE and FALSE
(as appropriate) in expressions that check RemainingDevicePath and/or
Private->GopDevicePath.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15283 6f19259b-4bc3-4df7-8a09-765794883524
In QemuVideoControllerDriverStart():
- remove redundant zero-initialization of:
- Private->Handle (2 locations)
- Private->GopDevicePath (when at devpath end)
- remove fields used for error handling only:
- PciAttributesSaved
- tigthen scope of temporaries:
- MmioDesc
- AcpiDeviceNode
- supplement missing error checks:
- AppendDevicePathNode() can fail with out-of-memory (2 locations)
- when installing GopDevicePath
- retval of QemuVideoGraphicsOutputConstructor() (can justifiedly fail
with out-of-resources)
- plug leaks on error:
- free GopDevicePath (AppendDevicePathNode() allocates dynamically)
- uninstall GopDevicePath
- free Private->ModeData
- call QemuVideoGraphicsOutputDestructor()
- uninstall GOP
In QemuVideoGraphicsOutputConstructor(), called by Start():
- supplement missing error checks:
- QemuVideoGraphicsOutputSetMode() retval (it can fail with
out-of-resources)
- plug leaks on error:
- free Mode->Info
- free Mode
In QemuVideoCirrusModeSetup() and QemuVideoBochsModeSetup(), both called
by Start():
- supplement missing error checks:
- AllocatePool() can fail in both
In QemuVideoGraphicsOutputDestructor(), called by Start() on the error
path:
- plug leaks:
- free Private->LineBuffer, which is allocated in
Start() -> Constructor() -> SetMode()
In QemuVideoGraphicsOutputSetMode(), called by Start() indirectly:
- remove redundant zero-assignment to:
- Private->LineBuffer
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15282 6f19259b-4bc3-4df7-8a09-765794883524
The QemuVideoDxe driver creates child controller handles, so it is acting
as a hybrid bus driver. The child handles should open the parent's bus
protocol BY_CHILD_CONTROLLER to properly maintain the protocol usage count.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14987 6f19259b-4bc3-4df7-8a09-765794883524
The qemu standard vga has a MMIO bar in qemu 1.3+.
Use it if available.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13969 6f19259b-4bc3-4df7-8a09-765794883524
Move to a table-driven hardware detection. Add a table with PCI IDs,
card name and variant enum. Use the table for hardware detection and
initialization. Rename Cirrus-specific data and code to carry "cirrus"
in the name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13967 6f19259b-4bc3-4df7-8a09-765794883524
This driver provides a UEFI Graphics Output Protocol (GOP) driver
for the QEMU Cirrus VGA hardware. It enables 24-bit color,
and uses the standard 32-bit GOP pixel format whenever possible.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11524 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek
Ruiyu Ni
Thomas Huth
Gerd Hoffmann
Scott Duplichan
Chris Ruffin
jljusten
ydong10
lzeng14
hhtian