REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2303
Whenever a PCI device is discovered, PCI bus calls the
EDKII_DEVICE_SECURITY_PROTOCOL to authenticate it.
If the function returns success, the PCI bus allocates
the resource and installs the PCI_IO for the device.
If the function returns fail, the PCI bus skips the device.
It is similar to EFI_SECURITY_ARCH_PROTOCOL, which
is used to verify an EFI image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Yun Lou <yun.lou@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
RequestMap is used but not Initialized.
RequestMap is called by UhciMapUserRequest, in which RequestMap(Map)
is called by IoMmuMap, and is finally called by IoMmu->Map.
We can not assume RequestMap is given an initial value at any step.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Map is used but not Initialized.
Map is called by IoMmuMap, in which Mapping(Map) is called by IoMmu->Map.
We can not assume Map is given an initial value at any step.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
DeviceIndex is used as index in Slot[]. The max size of Slot[]
is SD_PEIM_MAX_SLOTS. So DeviceIndex should be checked before used.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2312
This patch is for fixing unexpected system hang during S3 unlock process.
FatPei driver maintained and updated internal BlockIo devices list
when there is new BlockIo PPI has installed, and it relied on BlockIo PPI
service to get data from devices. Because BlockIo Ppi leverage
NvmExpressPei Ppi to transit Nvm command to device, we should make sure
NvmePassThruPpi installed before BlockIo PPI.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Add support for allocating aligned pages at an alignment higher
than 4K. The new function allocated memory taking into account
the padding required and then frees up unused pages before mapping
it.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
While allocating pages aligned at an alignment higher than
4K, allocate memory taking into consideration the padding
required for that alignment. The calls to free pages takes
care of this already.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
As per UFS spec, flag value is stored in the 'last byte' of value
field. Existing code is attempting to read first byte.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2208
Test: Verified the Fix by sending command to set fPowerOnWPEn flag
and then reading it to verify the set value.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sachin Agrawal <sachin.agrawal@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are on error paths. Fix the UninstallMultipleProtocolInterfaces()
calls.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
This patch implements the EFI_STORAGE_SECURITY_COMMAND_PROTOCOL in the
ScsiDiskDxe driver.
Support is currently limited to the RPMB Well-known LUN for UFS devices.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
Replacing "magic numbers" in the Peripheral Type check with defines for
the reserved range from IndustryStandard/Scsi.h
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1546
Currently UfsPassThru only checks for 8 common LUNs. This adds a check
for the RPMB Well-known LUN and sets the corresponding bit-mask. Further
handling of the WLUN is already present in the driver.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Christopher J Zurcher <christopher.j.zurcher@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
There is a bug in current driver code that makes
it impossible for it to work with devices that
only work in legacy speed mode since the function
EmmcSwitchToHighSpeed will return with EFI_INVALID_PARAMETER
for such bus mode. Since the logic in that function will
work well for SdMmcMmcLegacy this patch just allows
to call this function with SdMmcMmcLegacy bus mode.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
SD specification recommends switching card bus timing before
switching bus timing in controller. Emmc driver used to do
this switch other way around. This commit adds controller
timing switch in EmmcSwitchBusTiming function to enforce this
order and removes all controller timing programming from
EmmcSwitchToXXX functions.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
Stopping the SD clock before switching host controller
bus timing is only necessary if preset value enable is
set in host controller. Code that performs switch to
HS200 doesn't check this condition right now and we also
don't do the SD clock stop before any other bus timing switch
in host controller. Since the driver is generally not ready to support
host controller with preset value enable set we removed this
code.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1343
This commit adds EDKII_UFS_HC_PLATFORM_PROTOCOL implementation
in UfsPassThruDxe driver in version 1. Driver assumes that at
most one instance of the protocol exists in the system. Presence
of the protocol is not mandatory.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1343
Private data has been refactored to use EDKII_UFS_HC_INFO structure
to store host controller capabilities and version
information. Getting host controller data has been moved
into single place and is done before host controller enable.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1343
UfsExecUicCommand function has been refactored to allow
the caller to check the command results which is important
for commands such as UIC read.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Until now, during the USB device enumeration when its PortState
USB_PORT_STAT_CONNECTION bit was not set, the stack was not informed
that the device is not present. Fix that by returning appropriate
error code.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1796
Bug fixed in PciBusDxe\PciLib.c.
Removed the redundant second call to PciSearchDevice sub-routine when the
PCD for the Hot-Plug support is disabled.
Signed-off-by: Ashraf Javeed <Ashraf.javeed@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1882
Implement support for GetOperatingParamters notify phase
in SdMmcHcDxe driver. GetOperatingParameters notify phase
is signaled before we start card detection and initialization.
Code has been updated for both eMMC and SD card controllers to
take into consideration those new parameters. Initialization process
has been divided into 2 steps. In the first step we bring the link
up to the point where we can get card identification data(Extended
CSD in eMMC case and SWITCH command response in SD card case). This
data is later used along with controller capabilities and operating
parameters passed in GetOperatingParameters phase to choose preferred
bus settings in GetTargetBusSettings function. Those settings are later
on to start bus training to high speeds. If user passes incompatible
setting with selected bus timing driver will assume it's standard behavior
with respect to that setting. For instance if HS400 has been selected as a
target bus timing due to card and controller support bus width setting of
4 and 1 bit won't be respected and 8 bit setting will be chosen instead.
Tests on Marvell boards were also performed by Marcin Wojtas
<mw@semihalf.com>:
https://edk2.groups.io/g/devel/message/42999
Board 1 (out of tree): SD - OK, MMC - OK
Board 2: (Armada80x0McBin): SD - OK, MMC - OK
Board 3: (Armada70x0Db): SD - problems, MMC - OK
Please note that the problem on Armada70x0Db SD devices are introduced by
adding new types of SD bus modes, a subsequent patch within edk2-platforms
repository will be proposed to address it.
(More details can be referred from the above link.)
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Regression-tested-by: Sumit Garg <sumit.garg@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1341
Since UFS specification requires the data buffer specified
in PRDT to be DWORD aligned in size we had a code in
UfsInitUtpPrdt that aligned the data buffer by rounding down
the buffer size to DWORD boundary. This meant that for SCSI
commands that wanted to perform unaligned data transfer(such as
SENSE command) we specified to small buffer for the data to fit
and transfer was aborted. This change introduces code that allocates
auxiliary DWORD aligned data buffer for unaligned transfer. Device
transfers data to aligned buffer and when data transfer is over driver
copies data from aligned buffer to data buffer passed by user.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
In current implementation we are checking for device presence every
time we execute UIC command. To make UfsExecUicCommands more generic
checking device presence has been moved to UfsDeviceDetection.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1879
This commit will add codes to produce the NVM Express PassThru PPI.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
When assigning a physical PCIe device to a QEMU/KVM guest, PciBusDxe may
find that the extended config space is not (fully) implemented. In
LocatePciExpressCapabilityRegBlock(), "CapabilityEntry" may be read as
0xFFFF_FFFF at a given config space offset, after which the loop gets
stuck spinning on offset 0xFFC (the read at offset 0xFFC returns
0xFFFF_FFFF most likely as well).
Another scenario (not related to virtualization) for triggering the above
is when a Conventional PCI bus -- exposed by a PCIe-to-PCI bridge in the
topology -- intervenes between a PCI Express Root Port and a PCI Express
Endpoint. The Conventional PCI bus limits the accessible config space of
the PCI Express Endpoint, even though the endpoint advertizes the PCI
Express capability. Here's a diagram, courtesy of Alex Williamson:
[PCIe Root Port]--[PCIe-to-PCI]--[PCI-to-PCIe]--[PCIe EP]
->| |<- Conventional PCI bus
Catch reads of 0xFFFF_FFFF in LocatePciExpressCapabilityRegBlock(), and
break out of the scan with a warning message. The function will return
EFI_NOT_FOUND.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1862
Current implementation of function AhciModeInitialization() has an
incorrect assumption that the value in the CAP (offset 00h) register will
always be greater than the highest bit set for the value in the PI (offset
0Ch) register.
This will lead to an issue that hard disk devices may not be found in the
non-S3 boot path for some AHCI controller capabilities.
More specifically, variable 'PortInitializeBitMap' will have the value
from 'Private->PortBitMap', which will be 0xFFFFFFFF in non-S3 boot path.
When the CAP register is of value 0x1 and PI register with value 0x4
(meaning port 2 is available), the current logic will only enumerate port
0. And the device attached behind port 2 will not be enumerated.
To address this issue, variable 'PortInitializeBitMap' will now take the
bitwise and result between 'Private->PortBitMap' and the value read from
the PI register.
Please note that there will be no function impact for S3 path, since in
this case, the bits being set in 'Private->PortBitMap' will be a subset
of the bits being set in the PI register. Their bitwise and operation will
still be the value of 'Private->PortBitMap'.
Cc: Maggie Chu <maggie.chu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
DEPEX from PEI storage stack.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1777
BootInRecoveryMode Ppi dependency should be removed from PEI storage stack
drivers. Besides recovery, more features are using the storage stack.
Platform can apply Ppi dependency in Recovery FV which contains full
storage driver stack. Platform storage stack modules, such as host
controller init PEI module, should also remove this dependency.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not. So change the comments of NvmeShutdownAllControllers.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1483
This commit will add the PEI BlockIO (2) PPIs support for AHCI mode ATA
devices.
More specifically, the driver will consume the ATA AHCI host controller
PPI for ATA controllers working under AHCI code within the system. And
then produces the below additional PPIs for each controller:
EFI PEI Recovery Block IO PPI
EFI PEI Recovery Block IO2 PPI
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1483
Due to the limited resource on the VTd DMA buffer size in the PEI phase,
the driver will limit the maximum transfer block number for 48-bit
addressing.
According to PCDs:
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSize|0x00400000
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSizeS3|0x00200000
The default buffer size allocated for IOMMU mapping is:
* 4M bytes for non-S3 cases;
* 2M bytes for S3
For ATA devices in 48-bit address mode, the maximum block number is
currently set to 0xFFFF. For a device with block size equal to 512 bytes,
the maximum buffer allowed for mapping within AhciPei driver will be close
to 32M bytes. Thus, this commit will limit the 48-bit mode maximum block
number to 0x800, which means 1M-byte maximum buffer for mapping when the
block size of a device is 512 bytes. By doing so, potential failure on
calls to the IOMMU 'Map' service can be avoided.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Delete the explicit machine type check for option ROM images, and instead,
rely on the LoadImage() boot service to decide whether an option ROM can
be dispatched or not. This permits platforms to ship with emulators to
execute option ROMs that are not native to the processor architecture.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Driver was supporting only 32b DMA support for V3 controllers. Add
support for 64b DMA as well for completeness.
For V4.0 64b support, driver was looking at incorrect capability
register bit. Fix for that is present as well.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1583
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1474
Within UfsBlockIoPei, the current implementation of the Block IO(2)
services:
UfsBlockIoPeimGetMediaInfo
UfsBlockIoPeimReadBlocks
UfsBlockIoPeimGetMediaInfo2
UfsBlockIoPeimReadBlocks2
does not handle the input parameter 'DeviceIndex' properly.
According to both of the PI spec and the function description comments:
> DeviceIndex Specifies the block device to which the function wants
> to talk. ... This index is a number from one to
> NumberBlockDevices.
But current codes incorrectly treat the valid range of 'DeviceIndex' as 0
to (NumberBlockDevices - 1).
This commit is to address this issue.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the AHCI mode ATA device support in the PEI phase.
More specifically, the newly add AhciPei driver will consume the ATA AHCI
host controller PPI for ATA controllers working under AHCI code within the
system. And then produces the below PPIs for each controller:
EDKII PEI ATA PassThru PPI
Storage Security Command PPI
Also, the driver will consume the S3StorageDeviceInitList LockBox in S3
phase. The purpose is to perform an on-demand (partial) ATA device
enumeration/initialization on each controller to benefit the S3 resume
performance.
The implementation of this driver is currently based on the below
specifications:
Serial ATA Revision 2.6
Serial ATA Advanced Host Controller Interface (AHCI) 1.3.1
AT Attachment with Packet Interface - 6 (ATA/ATAPI-6)
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the NvmExpressPei driver, this commit will update the driver to
consume the S3StorageDeviceInitList LockBox in S3 phase. The purpose is to
perform an on-demand (partial) NVM Express device
enumeration/initialization to benefit the S3 resume performance.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the NvmExpressPei driver, this commit will add codes to produce the
Storage Security Command PPI if the underlying NVM Express controller
supports the Security Send and Security Receive commands.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This commit is out of the scope for BZ-1409. The commit will remove the
call of RegisterForShadow() at the entry point of the driver. By doing so,
the driver is now possible to be executed without being re-loaded into
permanent memory.
Thus, this commit will update the NvmExpressPei driver to avoid updating
the content of a global variable.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1537
Use 16-bit and 32-bit IO widths for SDMMC MMIO to prevent all register
accesses from being split up into 8-bit accesses.
The SDHCI specification states that the registers shall be accessible in
byte, word, and double word accesses. (SD Host Controller Simplified
Specification 4.20 Section 1.2)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1140
In eMMC HS400 switch sequence flow eMMC driver attempted
to execute SEND_STATUS just after switching bus timing to high
speed and before downgrading clock frequency to 52MHz. Since link
was at that time in incorrect state SEND_STATUS was failing which
made driver think switch to HS400 failed.
This change makes driver always change clock frequency after
switching bus timing and before executing SEND_STATUS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Albecki Mateusz <mateusz.albecki@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1505
When a device under PPB contains option ROM but doesn't require 32bit
MMIO, ProgrameUpstreamBridgeForRom() cannot correctly restore the
PPB MEM32 RANGE BAR. It causes the 32bit MMIO conflict which may
cause system hangs in boot.
The root cause is when ProgrameUpstreamBridgeForRom() calls
ProgramPpbApperture() to restore the PPB MEM32 RANGE BAR, the
ProgramPpbApperture() skips to program the BAR when the resource
length is 0.
This patch fixes this issue by not calling ProgramPpbApperture().
Instead, it directly programs the PPB MEM32 RANGE BAR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Per PCI Spec, the option ROM BAR is 32bit so the maximum option ROM
size can be hold by UINT32 type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1408
According to the information of the above BZ-1408 and other platform
owners, NVM Express devices are becoming more likely to be a critical
part during the boot process.
This commit will add the calls to 'REPORT_STATUS_CODE' when there is a
failure happens during the NVM Express controller/device initialization
process.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <brbarkel@microsoft.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1441
This commit will update the file-level comments within the SdMmcPciHcDxe
to reflect the latest specification compliance status of the driver.
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1422
if (Attributes) {
if ((Attributes & (~(DEV_SUPPORTED_ATTRIBUTES))) != 0) {
return EFI_UNSUPPORTED;
}
}
In above code block,
"If ((Attributes & (~(DEV_SUPPORTED_ATTRIBUTES))) != 0)" is TRUE,
the Attributes must be not 0. So we can remove the redundant
check "if (Attributes)".
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1425
This commit will resolve the VS2015 IA32 NOOPT build failure within
SdMmcPciHcDxe.
More specifically, this commit will use BaseLib API RShiftU64() to perform
right-shift operations for UINT64 type operators.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Add SDMA, ADMA2 and 26b data length support.
If V4 64 bit address mode is supported in capabilities register,
program controller to enable V4 host mode and use appropriate
SDMA registers supporting 64 bit addresses.
If V4 64 bit address mode is supported in capabilities register,
program controller to enable V4 host mode and use appropriate
ADMA descriptors supporting 64 bit addresses.
If host controller version is above V4.0, enable ADMA2 with 26b data
length support for better performance. HC 2 register is configured to
use 26 bit data lengths and ADMA2 descriptors are configured appropriately.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1359
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1394
When there is no PCI option ROM exists, today's logic still creates
virtual BAR for option ROM using Length = 0, Alignment = (-1).
It causes the final MEM32 alignment requirement is as big as
0xFFFFFFFF_FFFFFFFF.
The patch fixes this issue by only creating virtual BAR for option
ROM when there is PCI option ROM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chiu Chasel <chasel.chiu@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
UEFI SCT crashed and failed in NonDiscoverablePciDeviceDxe becase
required checks were not performed. Perform parameters validation in
NonDiscoverablePciDeviceDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
Jiewen Yao
Shenglei Zhang
Maggie Chu
Ashish Singhal
Agrawal, Sachin
Laszlo Ersek
Zurcher, Christopher J
Albecki, Mateusz
Marcin Wojtas
Javeed, Ashraf
Hao A Wu
xuwei6
Zhichao Gao
Ard Biesheuvel
Michael D Kinney
Edgar Handal
Albecki, Mateusz
Ray Ni
Sean Brogan
Dandan Bi
Ruiyu Ni
Vladimir Olovyannikov