Updated Redistributor base calculation to allow for the fact that
GICv4 has 2 additional 64KB frames (for VLPI and a reserved frame).
The code now tests the VLPIS bit in the GIC Redistributor Type
Register (GICR_TYPER) and calculates the Redistributor granularity
accordingly.
The code changes are:
GICR_TYPER register fields, etc, added to the header.
Loop updated to pay attention to GICR_TYPER.Last.
Derive frame "stride" size from GICR_TYPER.VLPIS.
Note: The assumption is that the redistributors are adjacent for
all CPUs. However this may not be the case for NUMA systems.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the SBSA specification the Watchdog Compare
Register is split into two separate 32bit registers.
EDK2 code uses a single 64bit transaction to update
them, which can be problematic, depending on the SoC
implementation and could result in unpredictable behavior.
Fix this by modifying WatchdogWriteCompareRegister routine to
use two consecutive 32bit writes to the Watchdog Compare Register
Low and High, using new dedicated macros.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This is initial version of OP-TEE library that provides api's to
communicate with OP-TEE OS (Trusted OS based on ARM TrustZone) via
secure monitor calls. Currently it provides basic api to detect OP-TEE
presence via UID matching.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Dynamically allocate the buffer to receive the SCMI protocol list.
This makes MAX_PROTOCOLS redundant, so it is removed.
It also fixes one minor code alignment issue and removes an unused
macro PROTOCOL_MASK.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This change fixes a bug in the SCMI DXE which is observed with the
upcoming release of the SCP firmware.
The PROTOCOL_ID_MASK (0xF) which is used to generate an index in
the ProtocolInitFxns is wrong because protocol ids can be
anywhere in 0x10 - 15 or 0x80 - FF range. This mask generates
the same index for two different protocols e.g. for protocol ids
0x10 and 0x90, which causes duplicate initialization of a protocol
resulting in a failure.
This change removes the use of PROTOCOL_ID_MASK and instead
uses a list of protocol ids and their initialization functions
to identify a supported protocol and initialize it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Mva address calculation should use the left-shifted current
section index instead of the left-shifted table base address.
Using the table base address here has the side-effect of potentially
causing an access violation depending on the base address value.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Christopher Co <christopher.co@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Given that these days, our ARM port only supports ARMv7 and later, we
can assume that the page table walker's memory accesses are cache
coherent, and so there is no need to perform cache maintenance. It
does require the page tables themselves to reside in memory mapped as
writeback cacheable so ASSERT() that this is the case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Peculiarly enough, the current page table manipulation code takes it
upon itself to write back and invalidate the memory contents covered
by page and section mappings when their memory attributes change. It
is not generally the case that data must be written back when such a
change occurs, even when switching from cacheable to non-cacheable
attributes, and in some cases, it is actually causing problems. (The
cache maintenance is also performed on the PCIe MMIO regions as they
get mapped by the PCI bus driver, and under virtualization, each
cache maintenance operation on an emulated MMIO region triggers a
round trip to the host and back)
So let's just drop this code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Align the prototype of ArmMtlLib's MtlWaitUntilChannelFree () with the
one in the ArmMtlNullLib implementation (rather than the other way around,
since edk2-platforms has a conflicting implementation as well)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Enable to NOOPT build target so we can build this package with
optimizations disabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Implement ResetSystemLib's EnterS3WithImmediateWake() routine using
a jump back to the PEI entry point with interrupts and MMU+caches
disabled. This is only possible at boot time, when we are sure that
the current CPU is the only one up and running. Also, it depends on
the platform whether the PEI code is preserved in memory (it may be
copied to DRAM rather than execute in place), so also add a feature
PCD to selectively enable this feature.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ARM platforms have no restriction on when a system firmware update
capsule can be applied, and so it is not necessary to call
ProcessCapsules() twice. So let's drop the first invocation that
occurs before EndOfDxe, and rewrite the second call so that all
capsule updates will be applied when the console is up and able to
provide progress feedback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This was the warning (shown for __aeabi_memcpy, __aeabi_memcpy4 and
__aeabi_memcpy8):
ArmPkg/Library/CompilerIntrinsicsLib/memcpy.c:42:6:
error: '__aeabi_memcpy8' alias between functions of incompatible types
'void(void*, const void *, size_t)'
{aka 'void(void *, const void *, unsigned int)'}
and 'void *(void *, const void *, size_t)'
{aka 'void *(void *, const void *, unsigned int)'} [-Werror=attribute-alias]
void __aeabi_memcpy8(void *dest, const void *src, size_t n);
ArmPkg/Library/CompilerIntrinsicsLib/memcpy.c:19:7: note: aliased declaration here
void *__memcpy(void *dest, const void *src, size_t n)
The problem is the different return type (void vs void*). So reshuffle
the code so the prototypes match between the aliases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
[ardb: change prototype of internal __memcpy() and drop extra wrapper]
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
GCC8 reported it with the following warning:
ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler.c: In function 'DisassembleArmInstruction':
ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler.c:397:30: error: bitwise
comparison always evaluates to false [-Werror=tautological-compare]
if ((OpCode & 0x0db00000) == 0x03200000) {
This condition tries to be true for both the immediate and the register
version of the MSR instruction. They get identified inside the if-block
using the variable I, which contains the value of bit 25.
The problem with the comparison reported by GCC is that the
bitmask excludes bit 25, while the value requires it to be set to one:
0x0db00000: 0000 11011 0 11 00 00 0000 000000000000
0x03200000: 0000 00110 0 10 00 00 0000 000000000000
^
So the solution is to just don't require that bit to be set, because
it gets checked later using 'I', which results in the following value:
0x01200000: 0000 00010 0 10 00 00 0000 000000000000
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c, the following
functions:
WatchdogWriteOffsetRegister()
WatchdogWriteCompareRegister()
WatchdogEnable()
WatchdogDisable()
provide write access to ARM Generic Watchdog registers and use the values
returned by MmioWrite32() and MmioWrite64() as EFI_STATUS return codes.
Because MmioWriteXY() return the value passed as its write parameter,
Generic Watchdog access functions can spuriously return error codes which
are different from EFI_SUCCESS, e.g. the following call
Status = WatchdogWriteOffsetRegister (MAX_UINT32);
if (EFI_ERROR (Status)) {
return Status;
}
will return MAX_UINT32 defined in MdePkg/Include/Base.h as
#define MAX_UINT32 ((UINT32)0xFFFFFFFF)
This commit declares all the functions listed above as VOID
and removes the code for checking their return values.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Reviewed-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In preparation of selectively reinstating the timer enable quirk for Xen
that we removed in commit 411a373ed6 ("ArmPkg/TimerDxe: remove workaround
for KVM timer handling"), add a ArmGenericTimerReenableTimer() library
function to ArmGenericTimerCounterLib that we will populate for Xen only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
This change introduces a new SCMI protocol driver for
Arm systems. The driver currently supports only clock
and performance management protocols. Other protocols
will be added as and when needed.
Clock management protocol is used to configure various clocks
available on the platform e.g. HDLCD clock on the Juno platforms.
Whereas performance management protocol allows adjustment
of various performance domains. Currently this is used to evaluate
performance of the Juno platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Upcoming new component ArmPkg/Drivers/ArmScmiDxe is dependent on
platform specific ArmMtlLib library implementation, however in order
to be able to build the ArmScmiDxe component outside of the context of a
particular platform, this change adds Null implementation of the
ArmMtlLib along with ARM MTL library header.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When we first ported EDK2 to KVM/arm, we implemented a workaround for
the quirky timer handling on the KVM side. This has been fixed in
Linux commit f120cd6533d2 ("KVM: arm/arm64: timer: Allow the timer to
control the active state") dated 23 June 2014, which was incorporated
into Linux release 4.3.
So almost 4 years later, it should be safe to drop this workaround on
the EDK2 side.
This reverts commit b1a633434d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 61a7b0ec63 ("ArmPkg/Gic: force GIC driver to run before CPU arch
protocol driver", 2018-02-06) explains why CpuDxe should be dispatched
after ArmGicDxe.
To implement the ordering, we should use a regular protocol depex rather
than the less flexible AFTER opcode. ArmGicDxe installs
gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid as one
of the last actions on its entry point stack; either of those is OK for
CpuDxe to wait for.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
"ArmGicDxe.inf" currently does not document how the protocols in the
[Protocols] section are used. Such comments help us analyze behavior, so
let's add them now.
- gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid are
always produced on the InterruptDxeInitialize() -> (GicV2DxeInitialize()
| GicV3DxeInitialize()) -> InstallAndRegisterInterruptService() call
path.
- gEfiCpuArchProtocolGuid is consumed in the CpuArchEventProtocolNotify()
protocol notify callback. (Technically this is "conditional"; however
the firmware cannot work without architectural protocols, so we can call
it unconditional.)
While at it, drop the gArmGicDxeFileGuid comment from FILE_GUID; we're
going to make that GUID uninteresting soon.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If timer interrupt is level sensitive, reloading timer compare
register has a side effect of clearing GIC pending status, so a "ISB"
is needed to make sure this instruction is executed before enabling
CPU IRQ, or else we may get spurious timer interrupts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The generic timer driver only EOIs the timer interrupt if
the ISTATUS bit is set. This is completely fine if you pretend
that spurious interrupts do not exist. But as a matter of fact,
they do, and the first one will leave the interrupt activated
at the GIC level, making sure that no other interrupt can make
it anymore.
Making sure that each interrupt Ack is paired with an EOI is the
way to go. Oh, and enabling the interrupt each time it is taken
is completely pointless. We entered this function for a good
reason...
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce CRT assembly replacements for __rt_sdiv, __rt_udiv,
__rt_udiv64, __rt_sdiv64, __rt_srsh (by reusing the RVCT code)
as well as memcpy and memset.
For MSFT compatibility, some of the code needs to be explicitly
forced to ARM, and the /oldit assembly flag needs to be added.
Also, while RVCT_ASM_EXPORT macro invocations have been removed,
the replacement code is designed to be as close as possible to
the one that would have been generated if using the macros.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Currently, the GIC driver has a static dependency on the CPU arch protocol
driver, so it can register its IRQ handler at init time. This means there
is a window between dispatch of the CPU driver and dispatch of the GIC
driver where any unexpected GIC state may trigger an interrupt which we
are not set up to handle yet. Note that this is even the case if we enter
UEFI with interrupts disabled at the CPU, given that any TPL manipulation
involving TPL_HIGH_LEVEL will unconditionally enable IRQs at the CPU side
regardless of whether they were enabled to begin with (but only as soon as
the CPU arch protocol is actually installed)
So let's reorder the GIC driver with the CPU driver, and let it run its
initialization that puts the GIC into a known state before enabling
interrupts. Move its installation of its IRQ handler to a protocol notify
callback on the CPU arch protocol so that it runs as soon as it becomes
available.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
gEfiDebugSupportPeriodicCallbackProtocolGuid and
PcdCpuDxeProduceDebugSupport are referred to from CpuDxe.
Delete references from .inf and .h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This currently isn't needed by anything in the edk2 tree but
it's useful for externally maintained platforms which have
to set this register e.g. to disable alignment aborts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
From what I can see this bug dates back to the commit from 2011 where
support for this was added: 2cf4b60895
The first problem is that PopulateLevel2PageTable overflows the
translation table buffer because it doesn't verify that the size
actually fits within one level 2 page table.
The second problem is that the loop in FillTranslationTable doesn't
care about the PhysicalBase or the RemainLength and always substracts
one section size from RemainLength.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a missing newline to the version string output that is displayed
on the serial console, or the next line will be appended to it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString is set to
a non-empty string, print it to the console at boot. Note that this
is independent of DEBUG/RELEASE or graphical vs serial console,
although we do attempt to stay clear of the logo and progress bar
in graphical mode, by printing it top center.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This patch add implementation of following new API introduced into
CpuExceptionHandlerLib. Since this lib hasn't support Stack Guard
and stack switch, the new method just calls original
InitializeCpuExceptionHandlers.
EFI_STATUS
EFIAPI
InitializeCpuExceptionHandlersEx (
IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL,
IN CPU_EXCEPTION_INIT_DATA *InitDataEx OPTIONAL
);
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
With the last user FdtPlatformDxe removed, we can finally get rid of the
last bit of ARM BDS related cruft.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This module is not used anywhere under edk2 or edk2-platforms, so let's
remove it. This removes the only dependency on ArmPlatformLib from ArmPkg.
While at it, remove a mention of ArmPlatformPkg from a comment in the
.dec file as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, each ARM platform built with RVCT that uses ArmHvcLib
or ArmSmcLib needs to specify a CPU target that implements both the
security and virtualization extensions, so that the assembler does
not choke on the 'hvc' and 'smc' instructions in ArmHvcLib/ArmSvcLib.
Let's move these overrides into the module .INFs so we can lift this
requirement at the platform side.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Flash region needs to be set as cacheable (write back) to increase
performance, if PEI is still XIP on flash or DXE FV is decompressed
from flash FV. However some ARM platforms do not support to set flash
as inner shareable since flash is not normal DDR memory and it will
not respond to cache snoop request, which will causes system hang
after MMU is enabled.
So we need a new ARM memory region attribute WRITE_BACK_NONSHAREABLE
for flash region on these platforms specifically. This attribute will
set the region as write back but not inner shared.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Peicong Li <lipeicong@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This patch adds a library that enables invocation of SVCs from Exception
Level EL0. It will be used by the Standalone MM environment to request
services from a software running in a privileged EL e.g. ARM Trusted
Firmware. The library is derived directly from Arm SMC Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
[ardb: assign frame pointer (AArch64)
keep stack alignment (ARM)]
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT hook call that I just added invokes the protocol before
retrieving a pointer to it, which interestingly enough did not
result in any crashes, nor did it get picked up by GCC. Clang did
notice, though, so let's fix it right away.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
SVCs are in the range 0xC4000060 - 0xC400007f.
The functions available to the secure MM partition:
1. Signal completion of MM event handling.
2. Set/Get memory attributes for a memory region at runtime.
3. Get version number of secure partition manager.
Also, it defines memory attributes required for set/get operations.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch adds a list of function IDs that fall under the standard
SMC range as defined in [1]
SMCs associated with Management Mode are in the range 0xC4000040 -
0xC400005f (64 bit) and 0x84000040 - 0x8400005f (32 bit).
The function(s) available to the normal world:
1. Request services from the secure MM environment using MM_COMMUNICATE.
It also defines MM return codes.
[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0060a/DEN0060A_ARM_MM_Interface_Specification.pdf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ESRT management protocol needs to be invoked at the appropriate times
to get the ESRT config table to be published when the ReadyToBoot event
is signalled. So add this handling to the default ArmPkg implementation
of PlatformBootManagerLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The existing HardwareInterrupt protocol lacked a means to configure the
level/edge properties of an interrupt. The new HardwareInterrupt2
protocol introduced this capability.
This patch updates the GIC drivers to provide the new interfaces.
The changes comprise:
Update to use HardwareInterrupt2 protocol
Additions to register info in ArmGicLib.h
Added new functionality (GetTriggerType and SetTriggerType)
The requirement for this change derives from a problem detected on ARM
Juno boards, but the change is of generic (ARM) relevance.
This commit is in response to review on the mailing list and, as
suggested there, rolls Girish's updates onto Ard's original example.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Girish Pathak <girish.pathak@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Process any capsule HOBs that were left for us by CapsulePei. This
involves calling ProcessCapsules() twice, as explained in the comment
in DxeCapsuleLibFmp [sic].
1) The first call must be before EndOfDxe. The system capsules is processed.
If device capsule FMP protocols are exposted at this time and device FMP
capsule has zero EmbeddedDriverCount, the device capsules are processed.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule and
all capsules are processed.
If not all capsules are processed, reset will be defered to second call.
2) The second call must be after EndOfDxe and after ConnectAll, so that all
device capsule FMP protocols are exposed.
The system capsules are skipped. If the device capsules are NOT processed
in first call, they are processed here.
Each individual capsule result is recorded in capsule record variable.
System may reset in this function, if reset is required by capsule
processed in first call and second call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARMv8.2-FP16 extension introduces support for half precision
floating point and the processor ID registers have been updated to
enable detection of the implementation.
The possible values for the FP bits in ID_AA64PFR0_EL1[19:16] are:
- 0000 : Floating-point is implemented.
- 0001 : Floating-point including Half-precision support is
implemented.
- 1111 : Floating-point is not implemented.
- All other values are reserved.
Previously ArmEnableVFP() compared the FP bits with 0000b to see if
the FP was implemented, before enabling FP. Modified this check to
enable the FP if the FP bits 19:16 are not 1111b.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Sami Mujawar
Haojian Zhuang
Marcin Wojtas
Sumit Garg
Ruiyu Ni
chenc2
Girish Pathak
Chris Co
Ard Biesheuvel
Michael Zimmermann
AlexeiFedorov
Laszlo Ersek
Heyi Guo
Marc Zyngier
Pete Batard
Leif Lindholm
Jian J Wang
Peicong Li
Supreeth Venkatesh
Evan Lloyd