The VariableRuntimeDxe links with NvVarStoreFormattedLib which is
required to establish the dependency on OvmfPkg\VirtNorFlashDxe.
The VirtNorFlashDxe installs the gEdkiiNvVarStoreFormattedGuid to
indicate it has finished initialising the flash variable storage
and that the variable service can be dispatched.
However, the kvmtool guest firmware dynamically detects if CFI
flash is absent and sets PcdEmuVariableNvModeEnable to TRUE
indicating emulated runtime variable must be used. Therefore,
in this scenario install the gEdkiiNvVarStoreFormattedGuid so
that the variable service can be dispatched.
Also link the NorFlashKvmtoolLib as a NULL library so that
it can discover if the CFI flash is absent and setup the PCD
PcdEmuVariableNvModeEnable. This is required in case the
NorFlashDxe is not yet dispatched.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The kvmtool option '--flash <flash filename>' is used to launch
a guests VM with a CFI flash device that maps the flash file
specified at the command line.
However, kvmtool allows guest VMs to be launched without a CFI
flash device. In such scenarios the firmware can utilize the
emulated variable storage for UEFI variables. To support this
the PCD gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable
must be set to TRUE.
Therefore, update the NorFlashKvmtoolLib to fallback to variable
emulation if a CFI device is not detected. Also improve the error
logging.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Kvmtool allows guest VMs to be launched with or without a
CFI flash device.
When the kvmtool option '--flash <flash filename>' is used to
launch a guest VM a CFI flash device maps the flash file that
was specified at the command line. The NorFlash driver uses
this flash as the variable storage backend.
However, when the above option is not specified, a CFI flash
device is not present. In such cases, the firmware can fallback
to use emulated runtime variables (which uses the VMs DRAM as
the storage backend).
Therefore, define the PCD PcdEmuVariableNvModeEnable required
to enable the emulated runtime variable support, but do not
enable it by default.
The firmware is expected to dynamically discover if the CFI
flash is present and subsequently enable NorFlash or emulate
the runtime variables.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The PCD gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable
indicates if a variable driver will emulate the variable NV mode.
This PCD is defined as [PcdsFixedAtBuild, PcdsPatchableInModule,
PcdsDynamic, PcdsDynamicEx].
Some firmware builds may define this PCD as a dynamic PCD and
initialise the value at runtime. Therefore, move the PCD declaration
from the [FixedPcd] section to the [Pcd] section in the platform
boot manager library file PlatformBootManagerLib.inf. Without this
change the build would not succeed.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The patch "f07a9df9af60 ArmVirtPkg: Enable stack guard"
enabled stack overflow detection for ArmVirtPkg. Following
this patch, running UEFI shell command 'dmpstore' resulted
in a crash indicating a stack overflow. Invoking 'dmpstore'
results in recursive calls to CascadeProcessVariables ()
which apparently consumes the available stack space and
overflows.
Normally, SEC and PEI run off the initial stack, and the
DxeIpl PEIM is in charge of launching the DxeCore with a
full-sized stack and remapping it non-executable as well.
PrePi platforms take some shortcuts and the DXE and BDS
run off the initial stack which is relatively small. It
is therefore desirable to allocate 128 KiB worth of boot
services data memory as the stack for the Dxe phase.
The PrePiMain () in ArmVirtPkg/PrePi/PrePi.c invokes the
LoadDxeCoreFromFv () to load the Dxe core and transfers
control. The second parameter to LoadDxeCoreFromFv () is
the stack size, which is currently set to 0.
LoadDxeCoreFromFv () is implemented in PrePiLib and if the
stack size is 0, it continues to use the initial stack.
However, if a stack size is specified in the call to
LoadDxeCoreFromFv (), memory is allocated for a new stack
and the stack is switched to use the newly allocated stack
for the Dxe phase.
Therefore, specify 128 KiB as the stack size in the call to
LoadDxeCoreFromFv () so that a separate stack is allocated
and used for the Dxe phase.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4463
When the AARCH64 CpuDxe attempts to SyncCacheConfig() with the GCD, it
collects the page attributes as:
EntryAttribute = Entry & TT_ATTR_INDX_MASK
However, TT_ATTR_INDX_MASK only masks the cacheability attributes and
drops the memory protections attributes. Importantly, it also drops the
TT_AF (access flag) which is now wired up in EDK2 to represent
EFI_MEMORY_RP, so by default all SystemMem pages will report as
EFI_MEMORY_RP to the GCD. The GCD currently drops that silently, because
the Capabilities field in the GCD does not support EFI_MEMORY_RP by
default.
However, some ranges may support EFI_MEMORY_RP and incorrectly mark
those ranges as read protected. In conjunction with another change on
the mailing list (see: https://edk2.groups.io/g/devel/topic/98505340),
this causes an access flag fault incorrectly. See the linked BZ below
for full details.
This patch exposes all memory protections attributes to the GCD layer so
it can correctly set pages as EFI_MEMORY[RP|XP|RO] when it initially
syncs.
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Taylor Beebe <t@taylorbeebe.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
If PcdUse1GPageTable is not enabled restrict the physical address space
used to 1TB, to limit the amount of memory needed for identity mapping
page tables.
The same already happens in case the processor has no support for
gigabyte pages.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Flip the default for IO address space reservations for PCI(e) bridges
and root ports with hotplug support from TRUE to FALSE.
PCI(e) bridges will still get IO address space assigned in case:
(a) Downstream devices actually need IO address space, or
(b) Explicit configuration, using "qemu -device
pcie-root-port,io-reserve=<size>".
In case IO address space is exhausted edk2 will stop assigning resources
to PCI(e) bridges. This is not limited to IO resources, the affected
bridges will not get any memory resources assigned either.
This patch solves this issue by not handing out the scarce IO address
space, which is not needed in most cases anyway. Result is a more
consistent PCI configuration in virtual machine configurations with many
PCie root ports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Not needed any more, SMM + 64-bit PEI + S3 suspend works now.
Fixed by commits:
- 8bd2028f9a ("MdeModulePkg: Supporting S3 in 64bit PEI")
- 6acf72901a ("UefiCpuPkg: Supporting S3 in 64bit PEI")
See also https://bugzilla.tianocore.org/show_bug.cgi?id=4195
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Move initialization of local variable structure from declaration
to statements to fix VS2015x86 build break.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb+tianocore@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4394
Fix DumpCapabilityReg() debug log to print 64 bit capability instead of
32 bit pointer
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Andrew Fish <afish@apple.com>
Signed-off-by: Giri Mudusuru <girim@apple.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
When calling SetValue() with string type input, there is
assertion of providing zero string ID to HII string function.
Fix this issue by creating string ID for input string buffer.
Fix Unicode and Ascii code convert issue together.
Add text op-code support
Signed-off-by: Nickle Wang <nicklew@nvidia.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Igor Kulchytskyy <igork@ami.com>
RTC runtime is unable to get dynamic PCD value after booting to
OS using runtime services.
Resolution: Cache the dynamic PCD value in RTC driver entry point
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Ideally behavior is like below order that can support one local build
machine, clone multiple Edk2, some of edk2 repo use old tag and
some of edk2 repo use new tag, they can both support on one machine.
1. if defined PYTHON_COMMAND only
- use PYTHON_COMMAND = user assigned
2. if not defined PYTHON_COMMAND, auto detect py -3
- use PYTHON_COMMAND = py -3
3. if defined PYTHON_COMMAND and PYTHON_HOME, use PYTHON_COMMAND
- use PYTHON_COMMAND = user assigned
4. if defined PYTHON_HOME only,
- use PYTHON_COMMAND = %PYTHON_HOME%/python.exe
SCRIPT_ERROR should return for paraent batch file to consume
for error handle.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4438
The main dispatch loop in PeiDispatcher() goes through each FV and
calls DiscoverPeimsAndOrderWithApriori() to search Apriori file to
reorder all PEIMs then do the PEIM dispatched.
DiscoverPeimsAndOrderWithApriori() calculates Apriori file count for
every FV once and set Private->AprioriCount, but Private->AprioriCount
doesn't be set to 0 before dispatch loop walking through the next FV.
It causes the peim which sort on less than Private->AprioriCount and
depex is not satisfied would be dispatched when dispatch loop go through
to a scaned FV, even the peim is not set in APRIORI file.
Cc: Leon Chen <leon.chen@insyde.com>
Cc: Tim Lewis <tim.lewis@insyde.com>
Reported-by: Esther Lee <esther.lee@insyde.com>
Signed-off-by: Wendy Liao <wendy.liao@insyde.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The helper that updates live page table entries writes a zero entry,
invalidates the covered address range from the TLBs, and finally writes
the actual entry. This ensures that no TLB conflicts can occur.
Writing the final entry needs to complete before any translations can be
performed, as otherwise, the zero entry, which describes an invalid
translation, may be observed by the page table walker, resulting in a
translation fault. For this reason, the final write is followed by a DSB
barrier instruction.
However, this barrier will not stall the pipeline, and instruction
fetches may still hit this invalid translation, as has been observed and
reported by Oliver. To ensure that the new translation is fully active
before returning from this helper, we have to insert an ISB barrier as
well.
Reported-by: Oliver Steffen <osteffen@redhat.com>
Tested-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- edk2-pytool-library: 0.14.0 to 0.14.1
- edk2-pytool-extensions: 0.21.8 to 0.23.2
- edk2-basetools: 0.1.43 to 0.1.48
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
If the SerialPortLib had any initialization needed, this
would be skipped in the RiscVVirt Sec. Follow the example
seen elsewhere (ArmVirtPkg PrePi).
Seen with BaseSerialPortLibRiscVSbiLibRam not using DBCN in Sec,
yet using DBCN elsewhere.
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
These are implementations of SerialPortLib using SBI console services.
- BaseSerialPortLibRiscVSbiLib is appropriate for SEC/PEI (XIP)
environments
- BaseSerialPortLibRiscVSbiLibRam is appropriate for PrePI/DXE
environments
Tested with:
- Qemu RiscVVirt (non-DBCN case, backed by UART)
- TinyEMU + RiscVVirt (non-DBCN case, HTIF)
- TinyEMU + RiscVVirt (DBCN case, HTIF)
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add a few more definitions and make SbiCall and TranslateError
usable (not static) by library users.
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
After moving BDS driver to a new FV for universal UEFI payload,
the shell boot option path is not correct since it used the BDS
FV instead of DXE FV in its device path.
This patch would find the correct FV by reading shell file.
It also removed PcdShellFile by using gUefiShellFileGuid.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Mike Maslenkin <mike.maslenkin@gmail.com>
Update reviewers and maintainers for FdtLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Benny Lin <benny.lin@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: James Lu <james.lu@intel.com>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Benny Lin <benny.lin@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
The warnings Clang emits when enabling -Wunneeded-internal-declaration
(which is part of -Wall) are generating false positives for variables
whose size gets taken but are not referenced beyond yet.
This may happen legitimately in debug code, so let's disable this
warning for Clang, rather than tiptoe around it in the code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
When using CLANGDWARF to build for the ARM architecture, objcopy is
references via the wrong environment variable, resulting in the wrong
llvm-objcopy to be used (if one exists), or the build to fail (if
CLANGDWARF_BIN points to the only available instance)
So use CLANGDWARF_BIN instead, which was what was intended.
Fixes: ecbc394365 ("BaseTools: Set CLANGDWARF RC path ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3805
Replace hardcoded SMBIOS Anchor string and size with defines.
Fix buffer overflow as described below.
Smbios64BitPrintEPSInfo () is coded like:
UINT8 Anchor[5];
MemToString (Anchor, SmbiosTable->AnchorString, 5);
But the definition of MemToString()
Copy Length of Src buffer to Dest buffer,
add a NULL termination to Dest buffer.
So Anchor needs to be +1 the size of the SMBIOS Anchor string `_SM3_`.
Changes from v1 to v2:
- Replace doxygen style inline comments
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Signed-off-by: Giri Mudusuru <girim@apple.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
This adds more definitions for the IPMI Get System Interface
Capabilities command.
Signed-off-by: Tinh Nguyen <tinhnguyen@os.amperecomputing.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Abner Chang <abner.chang@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Update reviewers and maintainers for TraceHubDebugSysTlib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: K N Karthik <karthik.k.n@intel.com>
Reviewed-by: Chan Laura <laura.chan@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4144
This Library provides API to dump Trace Hub message.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guo Gua <gua.guo@intel.com>
Cc: Chan Laura <laura.chan@intel.com>
Cc: Prakashan Krishnadas Veliyathuparambil <krishnadas.veliyathuparambil.prakashan@intel.com>
Cc: K N Karthik <karthik.k.n@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: K N Karthik <karthik.k.n@intel.com>
Reviewed-by: Chan Laura <laura.chan@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4144
This Library is NULL library of TraceHubDebugSysTLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Guo Gua <gua.guo@intel.com>
Cc: Chan Laura <laura.chan@intel.com>
Cc: Prakashan Krishnadas Veliyathuparambil <krishnadas.veliyathuparambil.prakashan@intel.com>
Cc: K N Karthik <karthik.k.n@intel.com>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: K N Karthik <karthik.k.n@intel.com>
Reviewed-by: Chan Laura <laura.chan@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Windows command prompt have 8191 characters limitation,
enhance it to make command too long can be resloved.
Provide an example, if have too many cov files, it causes to run single
command over the 8191 characters limitation.
> OpenCppCoverage
> --export_type binary:coverage.cov
> --working_dir={workspace}Build
> --input_coverage=AAA.cov
> ...
> --input_coverage=NNN.cov
The solution is passing many coverage files in single command line to
breaking it up into many command lines with one coverage file per
command line in order to prevent single line is over to 8191 characters.
- Command Line 1
> OpenCppCoverage
> --export_type binary:coverage.cov
> --working_dir={workspace}Build
> --input_coverage=AAA.cov
> --input_coverage=coverage.cov
...
- Command Line N
> OpenCppCoverage
> --export_type. binary:coverage.cov
> --working_dir={workspace}Build
> --input_coverage=NNN.cov
> --input_coverage=coverage.cov
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Michael Kubacki <mikuback@linux.microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
On Windows, executables have a '.exe' suffix which needs to be added for
them to be found in a path.
Also, files need to be explicitly opened as binary.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
The BASETOOLS_PYTHON_SOURCE environment variable is only used temporarily to
set PYTHONPATH. Since it doesn't help improve clarity, remove it.
While here, make sure we set PYTHONPATH when we're using Pip BaseTools
so that build etc. can be found.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
This reverts commit 11f62f4cc0.
While GCC uses objcopy for the OBJCOPY command, it's not needed for the
CLANGDWARF toolchain and can be left as echo.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Ard BIesheuvel <ardb@kernel.org>
Not used any more, remove.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Use PlatformBootManagerLib with PcdBootRestrictToFirmware
set to TRUE instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
In case PcdBootRestrictToFirmware is set, disable loading EFI variables
from NvVars file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add new PCD PcdBootRestrictToFirmware. When set to TRUE restrict
boot options to EFI applications embedded into the firmware image.
Behavior should be identical to the PlatformBootManagerLibGrub
library variant.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Remove bashisms from edksetup.sh and BaseTools/BuildEnv. This allows any
POSIX shell to use those scripts, removing the dependency on bash.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The build rule for Hii-Binary-Package.UEFI_HII should be the same as for
GCC, using $(RC) to embed the HII resource into the binary. Since the
build rule defaults to GCC, just remove CLANGGCC from the section.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The llvm-rc tool is for Windows PE resources. Since the CLANGDWARF
toolchain creates ELF binaries, update the RC path to be llvm-objcopy.
This follows the GCC toolchain which uses objcopy for the RC path.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Sami Mujawar
Oliver Smith-Denny
Gerd Hoffmann
Michael D Kinney
Giri Mudusuru
Nickle Wang
Gua Guo
Wendy Liao
Ard Biesheuvel
Michael Kubacki
Andrei Warkentin
Guo Dong
Tinh Nguyen
Rebecca Cran