Previously the interface to the SEC module was:
ESI/RSI - SEC Core entry point
EDI/RDI - PEI Core entry point
EBP/RBP - Start of BFV
Now it is:
RAX/EAX Initial value of the EAX register
(BIST: Built-in Self Test)
DI 'BP': boot-strap processor, or
'AP': application processor
RBP/EBP Address of Boot Firmware Volume (BFV)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9572 6f19259b-4bc3-4df7-8a09-765794883524
Previously it was:
ESI/RSI - SEC Core entry point
EDI/RDI - PEI Core entry point
EBP/RBP - Start of BFV
Now it is:
RAX/EAX Initial value of the EAX register
(BIST: Built-in Self Test)
DI 'BP': boot-strap processor, or
'AP': application processor
RBP/EBP Address of Boot Firmware Volume (BFV)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9571 6f19259b-4bc3-4df7-8a09-765794883524
a. Update PciBusDxe module, and move it from IntelFrameworkModulePkg to MdeModulePkg
b. Move IncompatiblePciDeviceSupportDxe module from IntelFrameworkModulePkg to MdeModulePkg
c. Update the related consumes in inf/dsc/fdf
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9350 6f19259b-4bc3-4df7-8a09-765794883524
Align the PE32/32+ images in the ROM for XIP (execute in place) images
to function properly following the change in r9327. Also, convert
pre-memory PEIM's to use the TE image format and strip-relocation
data from image. This saves a little space, and provides a sample
usage of TE images.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9332 6f19259b-4bc3-4df7-8a09-765794883524
Previously the code would expect that the PE32 image was in the
first section of the FFS file. This might not be the case if the
PE32 section is forced to be aligned.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9331 6f19259b-4bc3-4df7-8a09-765794883524
Note:
* This only works before ExitBootServices
* For OVMF, variables are only preserved on the disk if there
is a hard disk connected which has a writeable FAT file system.
The Ovmf/Library/EmuVariableFvbLib library will look for the
gUefiOvmfPkgTokenSpaceGuid.PcdEmuVariableEvent PCD to be set to
a non-zero value. If set, it is treated as an event handle, and
each write to the EmuVariableFvb will cause the event to be
signaled.
In this change, the OVMF platform BDS library sets up this event,
and sets the PCD so that after each write to the EMU Variable FVB,
the non-volatile variables will be saved out to the file system.
The end result is that NV variables that are written prior to the
ExitBootServices call should be preserved by storing them on the
disk.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9318 6f19259b-4bc3-4df7-8a09-765794883524
OVMF utilizes EmuVariableFvbRuntimeDxe to provide an emulated
variable firmware volume block device for non-volatile variables.
This allows the VariableRuntimeDxe and FaultTolerantWriteDxe
to function without a real non-volatile backing store.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9317 6f19259b-4bc3-4df7-8a09-765794883524
This driver implements a firmware volume block protocol instance
which is stored in system memory.
The MdeModulePkg/Universal/Variable/RuntimeDxe and
MdeModulePkg/Universal/FaultTolerantWriteDxe drivers make use of
this FVB instance to provide variable services.
This driver links to a PlatformFvb library to allow for
platform specific processing to take place when data is written
to the FVB.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9315 6f19259b-4bc3-4df7-8a09-765794883524
This library provides an interface where variables can be saved and restored
using a file in a file system accessible to the firmware. It is expected
that a platform BDS library will use this library. The platform BDS
implementation can decide which devices to connect and then to attempt to use
for saving and restoring NV variables.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9272 6f19259b-4bc3-4df7-8a09-765794883524
Make use of EMU Variable driver's PcdEmuVariableNvStoreReserved to allow
NV variables to persist a VM system reset. The contents of the NV variables
will still be lost when the VM is shut down, but they appear to persist
when the efi shell reset command is run. (Tested with QEMU 0.10.0.)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9241 6f19259b-4bc3-4df7-8a09-765794883524
QEMU will automatically fill the video BIOS image into memory at the
legacy video BIOS memory location (0xc0000). This code will look
there for a EFI option rom image, and load it if it found. This
allows the video option ROM to be separated out from the main system
firmware image.
QEMU does not appear to emulate the PCI rom expansion method
for making the video BIOS available to the system.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8942 6f19259b-4bc3-4df7-8a09-765794883524
It is not proper for a library implementation to assume the names of function in a parent module.
Instead, they must be designed as the pointers to these two BdsDxe functions and passed in.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8931 6f19259b-4bc3-4df7-8a09-765794883524
Move many libraries to Libraries.common section.
Add basic UEFI_APPLICATION libraries to allow applications
to be easily added to OVMF builds.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8688 6f19259b-4bc3-4df7-8a09-765794883524
xli24
klu2
jljusten
eric_tian
lgao4
qhuang8
davidhuang
rsun3
jchen20
gikidy
vanjeff
mdkinney