QEMU enables VIRTIO_VGA by default.
Libvirt falls back from virtio-gpu-pci to virtio-vga if made available by
QEMU.
We need to enable VGA support to get video output for EDK II in
virt-manager.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
While fixing https://github.com/tianocore/edk2/pull/6092 (the
fact that some OvmfPkg and ArmVirtPkg platforms included residual
NetworkPkg components even when compiled with -D NETWORK_ENABLE=0),
it was noted that OvmfPkg/Include/*/Shell*.inc files which apply
the required fix logic are available and already used in some
OvmfPkg platforms.
This commit applies these files consistently within OvmfPkg.
This has the side effect that some platforms now include one or
more of HttpDynamicCommand, VariablePolicyDynamicCommand and
LinuxInitrdDynamicShellCommand when they previously did not.
This fixes unintentional drift between platforms, and provides
additional shell commands which may be useful in some cases.
Signed-off-by: Mike Beaton <mjsbeaton@gmail.com>
This issue showed up when addressing
https://bugzilla.tianocore.org/show_bug.cgi?id=4829
in https://github.com/tianocore/edk2/pull/6087 .
Various OvmfPkg and ArmVirtPkg platforms include some residual NetworkPkg
components when compiled with -D NETWORK_ENABLE=0, even though they use
NetworkPkg includes intended to allow all NetworkPkg components to be
disabled on this flag.
For the OvmfPkg Intel platforms only, commit
d933ec115b started
the change of not including these residual NetworkPkg
components, and commit
7f17a15564 completed it.
This commit rolls these changes out to the remaining OvmfPkg platforms
where they make sense in the same way.
Signed-off-by: Mike Beaton <mjsbeaton@gmail.com>
CpuMmio2Dxe is supports MMIO, enable it.
Build-tested only (with "RiscVVirtQemu.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
NullMemoryTestDxe was included in the OVMF platforms in historical commit
999a815e9f ("OvmfPkg: Add NullMemoryTestDxe driver", 2011-01-21). It
produces gEfiGenericMemTestProtocolGuid. With LegacyBiosDxe gone, the only
consumer of this protocol in all of edk2 is
"EmulatorPkg/Library/PlatformBmLib/PlatformBmMemoryTest.c". Thus, exclude
NullMemoryTestDxe from all OVMF platforms.
(Notably, ArmVirtPkg platforms don't include NullMemoryTestDxe either.)
Cc: Anatol Belski <anbelski@linux.microsoft.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Corvin Köhne <corvink@freebsd.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jianyong Wu <jianyong.wu@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4588
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231110235820.644381-17-lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Use auto alignment and FIXED FFS attribute for XIP modules similar
to [1]. Without this change, the CLANGDWARF toolchain will fail to
build with below error.
GenFfs: ERROR 1000: Unknown option
SectionAlign option must be specified with section file.
[1] - 7669f73498
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # Debian clang version 14.0.6
Make sure VirtNorFlashDxe loaded before VariableRuntimeDxe as it
is the backend flash driver.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Currently, RiscVVirtQemu supports unified code and variable store
mainly because only one pflash devices was available in qemu for
EDK2. However, this doesn't allow to map the code part as read-only.
With recent qemu enhancements, it is now possible for EDK2 to make
use of both pflash devices in RISC-V virt machine. So, add support
to create code and vars images separately. This also allows easy
firmware code updates without losing the variable store.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested with a PCIe pass-thru'd AHCI controller.
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
Add infrastructure files to build edk2 for RISC-V qemu virt machine.
- It follows PEI less design.
- EDK2 for qemu virt is booted in S-mode as a payload for M-mode FW
- Leveraged from ArmVirtQemu
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Heinrich Schuchardt
Mike Beaton
Chao Li
Laszlo Ersek
Sunil V L
Tuan Phan
Andrei Warkentin