PI specification Vol 4 - SMM does not have any limitation of BASE_4GB for SMM.
So we should replace BASE_4GB check with MAX_ADDRESS check to make sure
the SMM memory is accessible by SMM Core.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
According to PI specification, EndOfDxe Event should be signaled before
DxeSmmReadyToLock protocol installation. This update is ASSERT if EndOfDxe
Event is not signaled when DxeSmmReadyToLock protocol installed. And do
REPORT_STATUS_CODE() also.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
We had put communication buffer to Runtime memory,
so that SMI handler can know it is not used by OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18949 6f19259b-4bc3-4df7-8a09-765794883524
to instead of AllocatePool() to ensure the data is clean for
the following consumption.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18087 6f19259b-4bc3-4df7-8a09-765794883524
that assumes the SMRAM reserved range is only at the end of the SMRAM descriptor.
//
// This range has reserved area, calculate the left free size
//
gSmmCorePrivate->SmramRanges[Index].PhysicalSize = SmramResRegion->SmramReservedStart - gSmmCorePrivate->SmramRanges[Index].CpuStart;
Imagine the following scenario where we just reserve the first page of the SMRAM range:
SMRAM Descriptor:
Start: 0x80000000
Size: 0x02000000
Reserved Range:
Start: 0x80000000
Size: 0x00001000
In this case the adjustment to the SMRAM range size yields zero: ReservedStart - SMRAM Start is 0x80000000 - 0x80000000 = 0.
So even though most of the range is still free the IPL code decides its unusable.
The problem comes from the email thread: [edk2] PiSmmIpl SMRAM Reservation Logic.
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/15268
Also to follow the idea in the email thread, the patch is to
1. Keep only one copy of full SMRAM ranges in gSmmCorePrivate->SmramRanges,
split record for SmmConfiguration->SmramReservedRegions and SMM Core that
will be marked to be EFI_ALLOCATED in gSmmCorePrivate->SmramRanges.
2. Handle SmmConfiguration->SmramReservedRegions at beginning of, at end of,
in the middle of, or cross multiple SmramRanges.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18031 6f19259b-4bc3-4df7-8a09-765794883524
And also SMM Ready To Boot.
The SMM Exit Boot Service protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_GROUP_EXIT_BOOT_SERVICES
to notify SMM driver that system enter exit boot services.
The SMM Legacy Boot protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_LEGACY_BOOT_GUID
to notify SMM driver that system enter legacy boot.
The SMM Ready To Boot protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_GROUP_READY_TO_BOOT
to notify SMM driver that system enter ready to boot.
After them, any SMM drivers can get protocol notify on what happened
in DXE phase, then there is no need to let each individual SMM driver
to register SMM Communication Handler for that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17657 6f19259b-4bc3-4df7-8a09-765794883524
1. In PiSmmIpl.c, free FullSmramRanges at error condition.
2. Move pool and page management definitions and structures
from PiSmmCorePrivateData.h to PiSmmCore.h.
PiSmmCorePrivateData.h should be only used to share SMM_CORE_PRIVATE_DATA
between PiSmmCore and PiSmmIpl. Pool and page management definitions
and structures were moved from Pool.c and Page.c to PiSmmCorePrivateData.h
incorrectly for memory profile feature at EDK2 R16335 commit.
3. DumpSmramInfo() only used for memory profile, so move the declaration
into SmramProfileRecord.c.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17598 6f19259b-4bc3-4df7-8a09-765794883524
When the ExecuteSmmCoreFromSmram() function fails, SmmIplEntry()
restores the SMRAM range to EFI_MEMORY_UC. However, it saves the
return value of gDS->SetMemorySpaceAttributes() in the same Status
variable that gDS->contains the return value of ExecuteSmmCoreFromSmram().
Therefore, if gDS->SetMemorySpaceAttributes() succeeds, the failure
of ExecuteSmmCoreFromSmram() is masked, and Bad Things Happen (TM).
Introduce a temporary variable just for the return value of
gDS->SetMemorySpaceAttributes().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17417 6f19259b-4bc3-4df7-8a09-765794883524
If PI SMM IPL will be dispatched before the CPU AP is installed for a platform, the platform developer is expected to set cache-ability of SMRAM to WB earlier to improve performance of SMM initialization.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10998 6f19259b-4bc3-4df7-8a09-765794883524
1. Update PiSmmIpl.c DoCommunicate() to prevent exception in case call SmiManage directly if SMRAM is closed or locked. That case causes exception.
2. Update PiSmmCore.c SmmEntryPoint(). It is not required to save/restore InSmm. Because SMM is non-reentrant.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10131 6f19259b-4bc3-4df7-8a09-765794883524
Jiewen Yao
Jeff Fan
Star Zeng
Laszlo Ersek
Samer El-Haj-Mahmoud
Feng Tian
lzeng14
jyao1
rsun3
lgao4
mdkinney
hhtian
jgong5
jchen20
hhuan13