This reverts commit 31ae446b1a.
Changing the receive FIFO depth in Terminal driver Start() is not
recommended.
A new PCD PcdUartDefaultReceiveFifoDepth was added and
MdeModulePkg/SerialDxe driver uses the PCD as the default receive
FIFO depth.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
The Serial IO protocol instances provided by SerialDxe and consumed by
TerminalDxe come with a Mode.ReceiveFifoDepth=1 default setting, as
required by UEFI 2.5.
Although TerminalDxe calls EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the
TerminalDriverBindingStart() and TerminalConInTimerHandler() functions, it
only does so to change the Mode.Timeout member. Other members of Mode,
including Mode.ReceiveFifoDepth, are preserved.
On some platforms this causes the UART that underlies TerminalDxe not to
have enough room for bursts of scan codes, which translates to broken
parsing of escape sequences, e.g. cursor movement keys.
According to the UEFI spec, passing ReceiveFifoDepth=0 to
EFI_SERIAL_IO_PROTOCOL.SetAttributes() "will use the device's default FIFO
depth". While TerminalDxe could try to configure a receive FIFO depth that
matches the longest escape sequence it wishes to parse, in practice the
device-specific default FIFO depth -- which may well differ from the
spec-mandated SerialIo->Mode.ReceiveFifoDepth=1 default -- seems to work.
Hence let's just set that.
This issue was exposed by SVN r18971 / git commit 921e987b2b
("ArmPlatformPkg: Use SerialDxe in MdeModulePkg instead of EmbeddedPkg").
In that conversion, MdeModulePkg's SerialDxe started to initialize
Mode.ReceiveFifoDepth to 1 (in conformance with the spec), unlike the
prior, non-conformant initialization to 0 in EmbeddedPkg's SerialDxe.
Since TerminalDxe would never change ReceiveFifoDepth from the new default
value 1, and the ArmPlatformPkg/Drivers/PL011Uart library instance,
underlying SerialDxe through SerialPortLib, would obey it too, they would
collectively effect a receive queue depth of 1, rather than the default 16
or 32. This broke cursor keys on the ARM FVP and Juno platforms.
It is the client of EFI_SERIAL_IO_PROTOCOL that is responsible for
modifying the attributes, if the defaults are not appropriate, hence this
patch modifies TerminalDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ryan Harkin <ryan.harkin@linaro.org>
Reference: http://thread.gmane.org/gmane.comp.bios.edk2.devel/4779/focus=6553
Reference: http://thread.gmane.org/gmane.comp.bios.edk2.devel/6594
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19701 6f19259b-4bc3-4df7-8a09-765794883524
The SerialIo->GetControl() function is not required to set the
Control output parameter on error. Make sure we apply the
EFI_SERIAL_INPUT_BUFFER_EMPTY optimization in
TerminalConInTimerHandler() only if the SerialIo->GetControl()
function call set that bit in the Control variable.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18962 6f19259b-4bc3-4df7-8a09-765794883524
1. Get default terminal type from PCD rather than using PCANSI
directly in BuildTeminalDevpath;
2. Only terminal type is needed to create an TerminalDev instance, so
remove the useless code of creating and freeing DefaultNode.
3. Some white space refining.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18027 6f19259b-4bc3-4df7-8a09-765794883524
This is bug fix for TerminalDxe: NullRemaining should be set to FALSE
by fault and then be set to TRUE conditionally.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18026 6f19259b-4bc3-4df7-8a09-765794883524
Accept the VT220 escape code [3~ as backspace for TtyTerm terminals. This is
sent by many Linux terminals by default. Also accept VT220 function keys
F1-F12, and VT100 F1-F4 keys as these are commonly sent by Linux terminals.
The VT220 escape codes are longer, and variable length so a new state is added
to the state machine along with a variable to construct the multibyte escape
sequence.
There are currently no ambiguous escape sequence prefixes accepted, so the TTY
terminal accepts escape sequences for a variety of terminals. The goal is to
'just work' with as many terminals as possible, rather than properly emulating
any specific terminal. Backspace, Del, and F10 have been tested on xterm,
rxvt, tmux, and screen.
Note: The existing vt100 function key handling does not match the vt100
documentation that I found, so I added the TTY terminal handling
of VT100 F1-F4 (really PF1-PF4 on vt100) separately. The vt100
has no F5-F10 keys, so I don't know what the current vt100 code
is based on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17897 6f19259b-4bc3-4df7-8a09-765794883524
Treat ASCII 0x7F as backspace, rather than delete, for TTY terminals. This
better matches the default Linux terminal settings that are used when connecting
to a simulated platform using xterm or a similar terminal program.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17896 6f19259b-4bc3-4df7-8a09-765794883524
This patch a adds new terminal type, TtyTerm, to TerminalDxe. This terminal
type provides a place to add support for various *nix terminals that don't
behave like standard VT terminals. The goal is to 'just work' with as many
terminals as possible, rather than properly emulating any one specific
terminal.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17895 6f19259b-4bc3-4df7-8a09-765794883524
- Fix EFI_IPv4_ADDRESS usages to use a macro to copy the structure
instead of direct assignment, to avoid runtime alignment errors.
- Fix a EFI_INPUT_KEY usage in TerminalDxe to use CopyMem() to copy the
structure instead of direct assignment, to avoid runtime alignment error.
- Delete excess local variables that are initialized but otherwise unused.
- CompilerIntrinsicsLib library now imported for AARCH64, as well as ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Randy Pawell <randy_pawell@hp.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16471 6f19259b-4bc3-4df7-8a09-765794883524
1. Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
2. Remove unused SectionExtractionDxeModStrs.uni and SectionExtractionPeiModStrs.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16044 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15963 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15962 6f19259b-4bc3-4df7-8a09-765794883524
Clean up the code to remove unnecessary NotifyHandle in the private data structure.
Signed-off-by: Ruiyu Ni<ruiyu.ni@intel.com>
Reviewed-by: Elvin Li<elvin.li@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13565 6f19259b-4bc3-4df7-8a09-765794883524
Enhance ConSplitter to register hot keys for new connected consoles.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hot Tian <hot.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13358 6f19259b-4bc3-4df7-8a09-765794883524
Fixes a Terminal FIFO full issue that caused data to be lost. The Unicode and EFI Key FIFOs are now checked to make sure they have spaces before pushing another entry.
Signed-off-by: eugenecohen
Reviewed-by: niruiyu
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12512 6f19259b-4bc3-4df7-8a09-765794883524
The others changes include:
1. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called.
2. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle.
3. If no any child device is created on last time, and RemainingDevicePath is valid Uart Devcie path, go on creating child device handle based on this RemainingDevicePath.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9262 6f19259b-4bc3-4df7-8a09-765794883524
Ruiyu Ni
Laszlo Ersek
Jordan Justen
Star Zeng
Heyi Guo
Roy Franz
Randy Pawell
Gao, Liming
Elvin Li
Eric Dong
li-elvin
niruiyu
ydong10
jljusten
mdkinney
rsun3
hhtian
lgao4
vanjeff
xli24
AJFISH
gikidy