remove EFI_CAPSULE_FROM_FILE_DIR
remove EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED.
no one uses them.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Fix the bug that FILE DATA to support relative path under Multiple
workspace.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
FDF spec support to use 'Auto' as <FfsAlignmentValues>, but current Tool
report error about -a=Auto is invalid option when we set Align=Auto for
RAW File.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We will put APs into hlt-loop in safe code. But we decrease mNumberToFinish
before APs enter into the safe code. Paolo pointed out this gap.
This patch is to move mNumberToFinish decreasing to the safe code. It could
make sure BSP could wait for all APs are running in safe code.
https://bugzilla.tianocore.org/show_bug.cgi?id=216
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
On S3 path, we may transfer to long mode (if DXE is long mode) to restore CPU
contexts with CR3 = SmmS3Cr3 (in SMM). AP will execute hlt-loop after CPU
contexts restoration. Once one NMI or SMI happens, APs may exit from hlt state
and execute the instruction after HLT instruction. If APs are running on long
mode, page table is required to fetch the instruction. However, CR3 pointer to
page table in SMM. APs will crash.
This fix is to disable long mode on APs and transfer to 32bit protected mode to
execute hlt-loop. Then CR3 and page table will no longer be required.
https://bugzilla.tianocore.org/show_bug.cgi?id=216
Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Paolo Bonzini <pbonzini@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
On S3 path, we will wake up APs to restore CPU context in PiSmmCpuDxeSmm
driver. However, we place AP in hlt-loop under 1MB space borrowed after CPU
restoring CPU contexts.
In case, one NMI or SMI happens, APs may exit from hlt state and execute the
instruction after HLT instruction. But the code under 1MB is no longer safe at
that time.
This fix is to allocate one ACPI NVS range to place the AP hlt-loop code. When
CPU finished restoration CPU contexts, AP will execute in this ACPI NVS range.
https://bugzilla.tianocore.org/show_bug.cgi?id=216
v2:
1. Make stack alignment per Laszlo's comment.
2. Trim whitespace at end of end.
3. Update year mark in file header.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Paolo Bonzini <pbonzini@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Added PCD PcdIntelGraphicsVbtFileGuid to store raw format
Graphics Video BIOS Table (VBT) in FFS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=228
Add a utility that converts a binary file into a VOID* PCD value
or a full DSC file VOID* PCD statement with support for all the
DSC supported PCD sections.
usage: BinToPcd [-h] [--version] -i INPUTFILE [-o OUTPUTFILE] [-p PCDNAME]
[-t {VPD,HII}] [-m MAXSIZE] [-f OFFSET] [-n VARIABLENAME]
[-g VARIABLEGUID] [-v] [-q] [--debug [0-9]]
Convert a binary file to a VOID* PCD value or DSC file VOID* PCD statement.
Copyright (c) 2016, Intel Corporation. All rights reserved.
optional arguments:
-h, --help show this help message and exit
--version show program's version number and exit
-i INPUTFILE, --input INPUTFILE
Input binary filename
-o OUTPUTFILE, --output OUTPUTFILE
Output filename for PCD value or PCD statement
-p PCDNAME, --pcd PCDNAME
Name of the PCD in the form
<PcdTokenSpaceGuidCName>.<PcdCName>
-t {VPD,HII}, --type {VPD,HII}
PCD statement type (HII or VPD). Default is standard.
-m MAXSIZE, --max-size MAXSIZE
Maximum size of the PCD. Ignored with --type HII.
-f OFFSET, --offset OFFSET
VPD offset if --type is VPD. UEFI Variable offset if
--type is HII.
-n VARIABLENAME, --variable-name VARIABLENAME
UEFI variable name. Only used with --type HII.
-g VARIABLEGUID, --variable-guid VARIABLEGUID
UEFI variable GUID C name. Only used with --type HII.
-v, --verbose Increase output messages
-q, --quiet Reduce output messages
--debug [0-9] Set debug level
This utility can be used in PCD value mode to convert a binary
file into a string that can then be copied into the PCD value field
of a VOID* PCD. The following is an example of PCD value mode on
an 8 byte test.bin file.
BinToPcd.py -i test.bin
{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
The DSC file VOID* PCD statement mode can be used to generate a
complete PCD statement for the PCD section types that a DSC file
supports:
[PcdsFixedAtBuild]
[PcdsPatchableInModule]
[PcdsDynamicDefault]
[PcdsDynamicExDefault]
[PcdsDynamicVpd]
[PcdsDynamicExVpd]
[PcdsDynamicHii]
[PcdsDynamicExHii]
The PCD statement mode is useful when combined with a !include
statement in a DSC file. BinToPcd.py can be used to convert a
binary file to a PCD statement in an output file, and that output
file can be included into a DSC file in the matching PCD section
to set the value of the PCD to the value from the binary file
without having to copy the value into the DSC file. Updates can be
made to the included file without editing the DSC file. Some
example use cases are the setting the public key PCDs such as:
gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer
gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBuffer
The following example converts a public key binary file to a
[PcdsFixedAtBuild] compatible PCD statement:
BinToPcd.py -i PublicKey.bin -o PublicKey.pcd
--pcd gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBufferkenSpaceGuid
The PublicKey.pcd output file contains a single line:
gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBuffer|{0x48, ...}
A DSC file can be updated to include the PublicKey.pcd file:
[PcdsFixedAtBuild]
!include PublicKey.pcd
Value examples
===============
BinToPcd.py -i test.bin
{0x68, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
Normal examples:
=================
BinToPcd.py -i test.bin -p Guid.Token
Guid.Token|{0x68, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
BinToPcd.py -i test.bin -p Guid.Token -m 20
Guid.Token|{0x68, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}|VOID*|20
VPD examples:
=============
BinToPcd.py -i test.bin -p Guid.Token -t VPD
Guid.Name|*|8|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
BinToPcd.py -i test.bin -p Guid.Token -t VPD -f 20
Guid.Name|20|8|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
BinToPcd.py -i test.bin -p Guid.Token -t VPD -m 10
Guid.Name|*|10|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
BinToPcd.py -i test.bin -p Guid.Token -t VPD -f 20 -m 10
Guid.Name|20|10|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
HII examples:
=============
BinToPcd.py -i test.bin -p Guid.Token -t HII -g VarGuid -n VarName
Guid.Name|L"VarName"|VarGuid|0|{0x48, 0x65, 0x6c, 0x6c}
BinToPcd.py -i test.bin -p Guid.Token -t HII -g VarGuid -n VarName -f 8
Guid.Name|L"VarName"|VarGuid|8|{0x48, 0x65, 0x6c, 0x6c}
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Declare fields in ECSD structure. And drop the original 128 words
arrary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Since ECSD also describes the information of card, move it into
structure CardInfo.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to eMMC spec, OCR.PowerUp bit is also busy bit. If the busy
bit is '0', CMD1 should be sent and OCR should be fetched again. And add
a timeout counter on the repeated steps.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=220
Currently, the post-build scripts PostBuild.bat/PostBuild.sh in DuetPkg
need to be run manually. Especially for Windows batch script, it also
requires users to set the build options (like tool chain, target and arch)
in file Conf/target.txt. If users using command line options via '-t' or
'-a', the post-build script won't work properly.
The package DSC files now support the feature to execute post-build script
automatically by adding a 'POSTBUILD' definition. This feature also passes
the build options into the post-build script as parameters. This commit
uses this feature to make the post-build works for DuetPkg more
user-friendly. Also, ReadMe.txt is updated to reflect the new steps for
UEFI Emulation (DUET) development.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Instead of putting a '@' at the beginning of every command in BATCH script
files, use 'echo off' at the beginning of each file.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch is used to revert changes done in commit 17f3e942
bc527fbd75068d2d5752b6af54917487 - "MdeModulePkg/UsbMass: Not
retry if usb bot transfer execution fail"
It's because Usb Floppy will report DEVICE_ERROR for the first
several cmds when it need spin up. so retry logic makes sense.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Added FspMemoryInitDone2, FspTempRamExitDone2, FspSiliconInitDone2
to return error status to Boot Loader for FSP API calls.
To maintain backward compatibility existing functions
(FspMemoryInitDone, FspTempRamExitDone, FspSiliconInitDone)
declaration left untouched.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Richard Thomaiyar <richard.marian.thomaiyar@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Currently, DxeMpLib only places APs into specified c-state in Exit Boot Service
callback function for UEFI OS boot. We need to put APs into specified c-state
for legacy OS boot also.
https://bugzilla.tianocore.org/show_bug.cgi?id=210
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Rename MpInitExitBootServicesCallback() to MpInitChangeApLoopCallback() because
it will not only be invoked on Exit Boot Service Event, but also will be invoked
on Legacy Ready To Boot Event.
https://bugzilla.tianocore.org/show_bug.cgi?id=210
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Current implementation just allocates reserve memory for AsmRelocateApLoopFunc.
It not be safe because APs will be placed into 32bit protected mode on long mode
DXE. This reserve memory must be located below 4GB memory.
This fix is to allocate < 4GB memory for AsmRelocateApLoopFunc.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: strip whitespace at EOL]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Correct the unaligned parameter names in comments (BaseCryptLib.h and
HMAC-SHA256 wrapper implementation)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
FreePool (Blt) function will be called in while loop, cannot be removed.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DumpHex() and CatSDumpHex() are public library APIs but don't have
EFIAPI modifier. Add the missing EFIAPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Commit 2cb8743524 eliminates possible NULL
pointer dereference in GenFfs tool source codes. However, it doesn't
correctly handle the case when the input file is of size 0. This will lead
to possible build issues.
This commits refine the logic to handle the above case.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The 3rd party image should be loaded after EndOfDxe event signal and
DxeSmmReadyToLock protocol installation. But non-SMM platform doesn't
published DxeSmmReadyToLock protocol.
So the SecurityStubDxe can only depend on EndOfDxe event.
This patch enhances the SecurityStubDxe to listen on
DxeSmmReadyToLock protocol installation and if any 3rd party image
is loaded before DxeSmmReadyToLock, it reports failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The patch adds check of deferred images before booting to OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The API dispatches the deferred images that are returned from all
DeferredImageLoad instances.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The images not from FV are treated as 3rd party images. They will
be deferred to dispatch when they are dispatched before EndOfDxe
event.
It's a new feature in the BS.LoadImage() path which can disallow
executing 3rd party images before EndOfDxe and re-execute them
after EndOfDxe (through EfiBootManagerDispatchDeferredImages
introduced in next commit).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Upon booting to a legacy OS, LegacyBios driver is responsible to
initialize the BDA region with the correct COM port base address.
But the current logic to get the COM port base address from IsaIo
instance is not correct.
The patch fixes this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
When PciSioSerial is firstly started with a non-NULL remaining
device path, the UART instance is created using the parameters
specified in the remaining device path. Later when the driver
is started again on the same UART controller with NULL remaining
device path, the correct logic is to directly return SUCCESS
instead of current buggy implementation which wrongly produces
another UART using the default parameters.
The bug causes two UARTs are created when the UART is configured
in 57600 baud rate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
The previous change to disable deprecated APIs in CorebootPayloadPkg
used "/D" instead of "-D". It caused Linux GCC build error. Correct
it to use "-D" instead.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Rusty Coleman <rcoleman@sigovs.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Reviewed-by: Rusty Coleman <rcoleman@sigovs.com>
Current code not validate the input buffer before touch.
it may touch the buffer outside the validate scope. This
patch validate the input size big enough to touch the
first node.
Cc: Ruiyu NI <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Former patch still has some bugs, so rollback it and
enhance the original code.
Cc: Ruiyu NI <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Current code not validate the input buffer before touch.
it may touch the buffer outside the validate scope. This
patch validate the input size big enough to touch the
first node.
Cc: Ruiyu NI <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Former patch still has some bugs, so rollback it and
enhance the original code.
Cc: Ruiyu NI <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Jiewen Yao
Gary Lin
Yonghong Zhu
Jeff Fan
Dandan Bi
Giri P Mudusuru
Michael Kinney
Haojian Zhuang
Hao Wu
Feng Tian
Thomaiyar, Richard Marian
Song, BinX
Ruiyu Ni
Maurice Ma
Eric Dong