Follow the Shell Spec, when the interface name is Specified,
we need to refresh the Ipv6 configuration.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
This reverts commit ee60bd2b6a and
e36ed7a84b.
The two commits enhanced 'edit' to support text selection through
mouse. But the code introduced some bugs resulting the text
selection behavior is not very usable and potentially hang in
certain platforms.
So I'd like to revert them firstly. If there is strong
requirement for the text selection through mouse in 'edit'
I will refine and re-add the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jarben.carsey@intel.com>
When we have intermittent loss of packets, ping command doesnt
return to Shell prompt. It keeps looping in the while (Status
==EFI_NOT_READY) since Private->RxCount will never reach
Private->SendNum. Addresses the issue with the use of a new varibale
in the PRIVATE structure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
when we use the ping6 command without configuring the network
interface, it should give correct prompt to users.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
When ASSERT_EFI_ERROR() is compiled out, dependent on build flags, only
the status checking should be removed; the function calls should stay.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch fixed a bug in UefiHandleParsingLib to show handle's loaded
image device path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The output of "dh <handle>" originally is like below:
12C: USBIO DevicePath(x0)/Pci(0x14,0x0)/USB(0x6,0x0))
The device path part is very confusing. Use ".." in front of the
partially displayed device path is better and it also aligns to
the example output in Shell spec.
12C: USBIO DevicePath(..)/Pci(0x14,0x0)/USB(0x6,0x0))
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1) RunSplitCommand() allocates the initial SplitStdOut via
CreateFileInterfaceMem(). Free SplitStdIn after the swap to fix
the memory leak.
2) In RunSplitCommand(), SplitStdOut is checked for equality with
StdIn. This cannot happen due to the if-check within the swap.
Hence remove it.
3) UefiMain() doesn't free SplitList. Delete all list entries and
reinitialize the list when in DEBUG. This does not include the
CreateFileInterfaceMem()-allocated SplitStd mentioned in 1), so
keep the ASSERT() until resolved.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
This patch fixes the ARM build failure introduced by
2be45bfe27.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Until now the 'addp' command has been handled in the same way as 'add'.
Just copy the DevicePath starting from the Hard Drive node when 'addp'
is used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
The EFI_UNICODE_COLLATION_PROTOCOL can have two different GUIDs.
Look for both to support more UEFI implementations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
TFTP block size has a big impact on the transmit performance, this patch is to
add new argument [-s <block size>] for shell "tftp" command to configure the
block size for file download.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
If 'ReadKeyStroke' function return EFI_NOT_READY then skip it.
If the return value is EFI_DEVICE_ERROR clean the currentString buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pedroa Liu <pedroa.liu@insyde.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
When executing shell dp command, there is an error message "Timer library
instance error!"
The error message "Timer library instance error!" should be for the case about
duration > EndTimeStamp if CountUp or duration > StartTimeStamp if CountDown.
But if the EndTimeStamp of an entry is not added, it should not the case to catch.
This change fixes the error message "Timer library instance error!" from the
"BdsAttempt" entry which is logged when trying to boot a boot option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
v2:
* Refine the code to make it more readable.
This patch is used to support no source IP specified case while
multiple NICs existed in the platform. The command will select the
first both connected and configured interface automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
v2:
* A. Refine the code to make it more readable.
* B. Add hint message for link local address case.
This patch is used to support no source IP specified case
while multiple NICs existed in the platform. The command
will select the first both connected and configured interface
automatically.
Note: Source address is always required when pinging a
link-local address.
Cc: David Van Arnem <dvanarnem@cmlab.biz>
Cc: Bhupesh Sharma <bhupesh.sharma@nxp.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
UEFI Shell 2.x cannot recognize whether a .EFI file is an application or
a driver. This means when we typed in a driver image in Shell command
line, Shell will load the driver image and try to run the entry point
function of the driver.
This patch check the ImageCodeType to fix the issue.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
This patch is used to update ping command options to sync
with shell2.2 Spec.
Considering the backward compatible issue, the patch keeps
‘-_s’ command option unchanged, only add the new option '-s'
and make the old option '-_s' function same as new one.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Ruiyu Ni
Zhang Lubo
Mudusuru, Giri P
Subramanian, Sriram (EG Servers Platform SW)
Thomas Palmer
Laszlo Ersek
Star Zeng
Marvin H?user
Fu Siyuan
Qiu Shumin
Pedroa Liu
Jaben Carsey
Cinnamon Shia
Jiaxin Wu
Samer El-Haj-Mahmoud
Tapan Shah
Abdul Lateef Attar